CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

File: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB.mib (76933 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB CISCO-WIRELESS-TC-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Integer32 Gauge32 NOTIFICATION-TYPE
Unsigned32 TimeInterval MacAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ifIndex CwrCwErrorFreeSecond WirelessGauge64
CwrCwErroredSecond CwrCwSeverelyErroredSecond CwrCwConsecutiveSevErrSecond
CwrCwDegradedSecond CwrFixedPointScale CwrFixedPointPrecision
CwrFixedPointValue CwrPercentageValue CwrUpdateTime
ciscoMgmt

Defined Types

P2mpMetricsPrecisionEntry  
SEQUENCE    
  p2mpLinkMetricsScale CwrFixedPointScale
  p2mpLinkMetricsPrecision CwrFixedPointPrecision

P2mpSuLinkMetricsThreshEntry  
SEQUENCE    
  p2mpSuLinkESThresh Unsigned32
  p2mpSuLinkDSThresh CwrPercentageValue
  p2mpSuLinkSESThresh CwrPercentageValue
  p2mpSuLinkCSESThresh Unsigned32
  p2mpSuLink1HrESAlarmThresh Unsigned32
  p2mpSuLink1HrSESAlarmThresh Unsigned32
  p2mpSuLink1HrCSESAlarmThresh Unsigned32
  p2mpSuLink1HrDCSAlarmThresh Unsigned32

P2mpSu1SecMetricsEntry  
SEQUENCE    
  p2mpSu1SecIndex Integer32
  p2mpSu1SecUpdateTime CwrUpdateTime
  p2mpSu1SecType INTEGER
  p2mpSu1SecTotalCodewords WirelessGauge64
  p2mpSu1SecTotalErrCodewords WirelessGauge64
  p2mpSu1SecValidDataPkt Counter32

P2mpSu1MinMetricsEntry  
SEQUENCE    
  p2mpSu1MinIndex Integer32
  p2mpSu1MinUpdateTime CwrUpdateTime
  p2mpSu1MinTotalCodewords WirelessGauge64
  p2mpSu1MinTotalErrCodewords WirelessGauge64
  p2mpSu1MinValidDataPkt Counter32
  p2mpSu1MinErrorFreeSeconds CwrCwErrorFreeSecond
  p2mpSu1MinErroredSeconds CwrCwErroredSecond
  p2mpSu1MinDegradedSeconds CwrCwDegradedSecond
  p2mpSu1MinSevErroredSeconds CwrCwSeverelyErroredSecond
  p2mpSu1MinConsecSevErrSeconds CwrCwConsecutiveSevErrSecond
  p2mpSu1MinSyncLossSeconds Counter32
  p2mpSu1MinTxPowerMax CwrFixedPointValue
  p2mpSu1MinTxPowerMin CwrFixedPointValue
  p2mpSu1MinTxPowerAvg CwrFixedPointValue
  p2mpSu1MinMainAntRxPowerMax CwrFixedPointValue
  p2mpSu1MinMainAntRxPowerMin CwrFixedPointValue
  p2mpSu1MinMainAntRxPowerAvg CwrFixedPointValue
  p2mpSu1MinDivAntRxPowerMax CwrFixedPointValue
  p2mpSu1MinDivAntRxPowerMin CwrFixedPointValue
  p2mpSu1MinDivAntRxPowerAvg CwrFixedPointValue

P2mpSu1HrMetricsEntry  
SEQUENCE    
  p2mpSu1HrIndex Integer32
  p2mpSu1HrUpdateTime CwrUpdateTime
  p2mpSu1HrTotalCodewords WirelessGauge64
  p2mpSu1HrTotalErrCodewords WirelessGauge64
  p2mpSu1HrValidDataPkt Counter32
  p2mpSu1HrErrorFreeSeconds CwrCwErrorFreeSecond
  p2mpSu1HrErroredSeconds CwrCwErroredSecond
  p2mpSu1HrSevErroredSeconds CwrCwSeverelyErroredSecond
  p2mpSu1HrConsecSvErrSeconds CwrCwConsecutiveSevErrSecond
  p2mpSu1HrSyncLossSeconds Counter32
  p2mpSu1HrDegradedSeconds CwrCwDegradedSecond
  p2mpSu1HrTxPowerMax CwrFixedPointValue
  p2mpSu1HrTxPowerMin CwrFixedPointValue
  p2mpSu1HrTxPowerAvg CwrFixedPointValue
  p2mpSu1HrMainAntRxPowerMax CwrFixedPointValue
  p2mpSu1HrMainAntRxPowerMin CwrFixedPointValue
  p2mpSu1HrMainAntRxPowerAvg CwrFixedPointValue
  p2mpSu1HrDivAntRxPowerMax CwrFixedPointValue
  p2mpSu1HrDivAntRxPowerMin CwrFixedPointValue
  p2mpSu1HrDivAntRxPowerAvg CwrFixedPointValue

P2mpSuCumulativeLinkMetricsEntry  
SEQUENCE    
  p2mpSuAvailableSeconds Counter32
  p2mpSuUnAvailableSeconds Counter32
  p2mpSuPctAvailSeconds CwrPercentageValue
  p2mpSuSyncLossSeconds Counter32
  p2mpSuPctErrorFreeSeconds CwrPercentageValue
  p2mpSuPctErroredSeconds CwrPercentageValue
  p2mpSuPctSevErroredSeconds CwrPercentageValue
  p2mpSuPctDegradedSeconds CwrPercentageValue
  p2mpSuInitialSyncSeconds Counter32
  p2mpSuSyncSuccessCount Counter32
  p2mpSuLastSyncSuccessTime TimeInterval
  p2mpSuSyncFailureCount Counter32
  p2mpSuLastSyncFailTime TimeInterval
  p2mpSuSyncMedEffort Counter32
  p2mpSuSyncHighEffort Counter32
  p2mpSuEffectiveDataRate Gauge32
  p2mpSuPercentEfficiency CwrPercentageValue

P2mpHeLinkMetricsThreshEntry  
SEQUENCE    
  p2mpHe1HrMinTotalCWThresh Unsigned32
  p2mpHe1HrPctErrCWThresh CwrPercentageValue

P2mpHeBadSuEntry  
SEQUENCE    
  p2mpBadSuIndex Integer32
  p2mpBadSuUpdateTime CwrUpdateTime
  p2mpBadSuMacAddress MacAddress
  p2mpTotalErroredCodewords Unsigned32
  p2mpPctErroredCodewords Unsigned32

P2mpHeCodewordErrorEntry  
SEQUENCE    
  p2mpSuMacAddress MacAddress
  p2mpHeCWErrorIndex Integer32
  p2mpHeCWErrorUpdateTime CwrUpdateTime
  p2mpTotalCodewords WirelessGauge64
  p2mpErroredCodewords WirelessGauge64
  p2mpSINR CwrFixedPointValue

P2mpHe1SecMetricsEntry  
SEQUENCE    
  p2mpHe1SecIndex Integer32
  p2mpHe1SecUpdateTime CwrUpdateTime
  p2mpHe1SecTotalCodewords WirelessGauge64
  p2mpHe1SecErroredCodewords WirelessGauge64

P2mpHe1MinMetricsEntry  
SEQUENCE    
  p2mpHe1MinIndex Integer32
  p2mpHe1MinUpdateTime CwrUpdateTime
  p2mpHe1MinTotalCodewords WirelessGauge64
  p2mpHe1MinErroredCodewords WirelessGauge64

P2mpHe1HrMetricsEntry  
SEQUENCE    
  p2mpHe1HrIndex Integer32
  p2mpHe1HrUpdateTime CwrUpdateTime
  p2mpHe1HrTotalCodewords WirelessGauge64
  p2mpHe1HrErroredCodewords WirelessGauge64

Defined Values

ciscoWirelessLinkMetricsMIB 1.3.6.1.4.1.9.9.181
This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The following terms are used in the MIB definitions below. Radio Interface: The interface that provides wireless communication features. Radio Link: The bi-directional wireless link between two communicating wireless radios. Radio PHY: Represents the transmission characteristics of the Radio link. Link Admin Up: This is the system time when the link is configured to be 'administratively up'. The user can configure the link to be up either by executing a 'no shut' command via the CLI or by setting the ifAdminStatus object in the IF-MIB to 'up(1)' via SNMP. Cisco Wireless MIB Organization The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is divided into 2 main groups. Head End: These objects are supported on the Head End only. Subscriber Unit: These objects are supported on the Subscriber unit only.
MODULE-IDENTITY    

p2mpLinkMetricsGroup 1.3.6.1.4.1.9.9.181.1
OBJECT IDENTIFIER    

p2mpSuLinkMetricsGroup 1.3.6.1.4.1.9.9.181.2
OBJECT IDENTIFIER    

p2mpHeLinkMetricsGroup 1.3.6.1.4.1.9.9.181.3
OBJECT IDENTIFIER    

p2mpMetricsPrecisionTable 1.3.6.1.4.1.9.9.181.1.1
This table contains the precision and scale values to be used when interpreting fixed point values in this MIB. This information is encapsulated in a table to accomodate for multiple cards in the same system having different precision values. This table is indexed by the ifIndex for the physical card (propDocsWirelessMaclayer). The user can refer to the entAliasMappingTable in the ENTITY-MIB to determine the upstream/downstream channels associated with each card.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpMetricsPrecisionEntry

p2mpMetricsPrecisionEntry 1.3.6.1.4.1.9.9.181.1.1.1
This represents one entry in the p2mpMetricsPrecisionTable. This table is indexed by the ifIndex of propDocsWirelessMaclayer.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpMetricsPrecisionEntry  

p2mpLinkMetricsScale 1.3.6.1.4.1.9.9.181.1.1.1.1
This variable indicates the exponent to apply to the fixed-point values.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointScale  

p2mpLinkMetricsPrecision 1.3.6.1.4.1.9.9.181.1.1.1.2
This variable indicates the number of decimal places used for precision when interpreting the fixed-point values.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointPrecision  

p2mpSuLinkMetricsThreshTable 1.3.6.1.4.1.9.9.181.2.1
This table contains threshold values that are the trigger points for controlling the collection of the Link Metrics such as Codeword Errored Seconds and others.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpSuLinkMetricsThreshEntry

p2mpSuLinkMetricsThreshEntry 1.3.6.1.4.1.9.9.181.2.1.1
This represents one entry in the table. There exists one such entry for every interface in the ifTable which has an ifType of propDocsWirelessDownstream. Each of these entries are indexed by the value of ifIndex as defined in RFC2233.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpSuLinkMetricsThreshEntry  

p2mpSuLinkESThresh 1.3.6.1.4.1.9.9.181.2.1.1.1
When the number of Codeword Errors detected in a single Operational second is greater than this value, that second is counted as an Errored Second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSuLinkDSThresh 1.3.6.1.4.1.9.9.181.2.1.1.2
When the percentage of codeword errors detected to the total codewords received in one second is equal to or greater than this value, and less than p2mpLinkSESThresh, the second is counted as a Codeword Degraded Second.
Status: current Access: read-write
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuLinkSESThresh 1.3.6.1.4.1.9.9.181.2.1.1.3
When the percentage of codeword errors detected to the total codewords received in one second equals or exceeds this value, that second is counted as a Severely Errored Second.
Status: current Access: read-write
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuLinkCSESThresh 1.3.6.1.4.1.9.9.181.2.1.1.4
When the number of severely errored codewords detected consecutively in one second equals or exceeds this value, the second is counted as a Consecutively Severely Errored Second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSuLink1HrESAlarmThresh 1.3.6.1.4.1.9.9.181.2.1.1.5
This object specifies the one hour Codeword Error Second threshold. When the number of Codeword Error Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSuLink1HrSESAlarmThresh 1.3.6.1.4.1.9.9.181.2.1.1.6
This object specifies the one hour Codeword Severely Errored Seconds threshold. When the number of Codeword Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuSevErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSuLink1HrCSESAlarmThresh 1.3.6.1.4.1.9.9.181.2.1.1.7
This object specifies the one hour Codeword Consecutively Severely Errored Seconds threshold. When the number of Codeword Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuConsecSevErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSuLink1HrDCSAlarmThresh 1.3.6.1.4.1.9.9.181.2.1.1.8
This object specifies the one hour Degraded Codeword Seconds threshold. When the number of Degraded Codeword Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuDegradedSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpSu1SecMetricsTable 1.3.6.1.4.1.9.9.181.2.2
This table contains metrics collected over the duration of one second. This table will have a maximum of 60 entries providing cumulative status of the link, identified by ifIndex of propDocsWirelessDownstream, over the past one minute. This table is updated once every second. After 60 seconds, only the latest 60 entries will be stored in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpSu1SecMetricsEntry

p2mpSu1SecMetricsEntry 1.3.6.1.4.1.9.9.181.2.2.1
This represents one entry in the p2mpSu1SecMetricsTable indexed by the ifIndex of propDocsWirelessDownstream and p2mpSu1SecIndex. The first entry in the table (p2mpSu1SecIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpSu1SecMetricsEntry  

p2mpSu1SecIndex 1.3.6.1.4.1.9.9.181.2.2.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..60  

p2mpSu1SecUpdateTime 1.3.6.1.4.1.9.9.181.2.2.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpSu1SecType 1.3.6.1.4.1.9.9.181.2.2.1.3
This object identifies the nature of the measured second.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unknown(0), errorFree(1), errored(2), degraded(3), sevErrored(4), syncLoss(5)  

p2mpSu1SecTotalCodewords 1.3.6.1.4.1.9.9.181.2.2.1.4
This object represents the total number of codewords received by this radio link from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1SecTotalErrCodewords 1.3.6.1.4.1.9.9.181.2.2.1.5
This object represents the total number of errored codewords received by this radio link from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1SecValidDataPkt 1.3.6.1.4.1.9.9.181.2.2.1.6
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSu1MinMetricsTable 1.3.6.1.4.1.9.9.181.2.3
This table contains metrics collected over the duration of one minute. This table will have a maximum of 60 entries providing cumulative statistics of the link, identified by ifIndex of propDocsWirelessDownstream, over the past one hour. This table is updated once every minute.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpSu1MinMetricsEntry

p2mpSu1MinMetricsEntry 1.3.6.1.4.1.9.9.181.2.3.1
This represents one entry in the p2mpSu1MinMetricsTable indexed by ifIndex of propDocsWirelessDownstream and p2mpSu1MinIndex. The first entry in the table (p2mpSu1MinIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpSu1MinMetricsEntry  

p2mpSu1MinIndex 1.3.6.1.4.1.9.9.181.2.3.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..60  

p2mpSu1MinUpdateTime 1.3.6.1.4.1.9.9.181.2.3.1.2
This object represents time in seconds since system power up until the time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpSu1MinTotalCodewords 1.3.6.1.4.1.9.9.181.2.3.1.3
This object represents the cumulative sum of received codewords from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1MinTotalErrCodewords 1.3.6.1.4.1.9.9.181.2.3.1.4
This object represents the cumulative sum of received errored codewords from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1MinValidDataPkt 1.3.6.1.4.1.9.9.181.2.3.1.5
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSu1MinErrorFreeSeconds 1.3.6.1.4.1.9.9.181.2.3.1.6
This object represents the cumulative Codeword Error Free Seconds (EFS) detected from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwErrorFreeSecond  

p2mpSu1MinErroredSeconds 1.3.6.1.4.1.9.9.181.2.3.1.7
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwErroredSecond  

p2mpSu1MinDegradedSeconds 1.3.6.1.4.1.9.9.181.2.3.1.8
This object represents the cumulative Codeword Degraded Seconds (DS) detected from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwDegradedSecond  

p2mpSu1MinSevErroredSeconds 1.3.6.1.4.1.9.9.181.2.3.1.9
This object represents the cumulative Codeword Severely Errored Seconds (SES) detected from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwSeverelyErroredSecond  

p2mpSu1MinConsecSevErrSeconds 1.3.6.1.4.1.9.9.181.2.3.1.10
This object represents the cumulative Codeword Consecutively Severely Errored Seconds (CSES) detected from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwConsecutiveSevErrSecond  

p2mpSu1MinSyncLossSeconds 1.3.6.1.4.1.9.9.181.2.3.1.11
This object represents the cumulative number of seconds from the last Link Admin Up time to the current operational minute the link was out of synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSu1MinTxPowerMax 1.3.6.1.4.1.9.9.181.2.3.1.12
This variable represents the maximum transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinTxPowerMin 1.3.6.1.4.1.9.9.181.2.3.1.13
This variable indicates the minimum transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinTxPowerAvg 1.3.6.1.4.1.9.9.181.2.3.1.14
This variable indicates the average measured transmit power of the subscriber unit measured during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinMainAntRxPowerMax 1.3.6.1.4.1.9.9.181.2.3.1.15
This variable indicates the maximum receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinMainAntRxPowerMin 1.3.6.1.4.1.9.9.181.2.3.1.16
This variable indicates the minimum receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinMainAntRxPowerAvg 1.3.6.1.4.1.9.9.181.2.3.1.17
This variable indicates the average receive power measured at the main antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinDivAntRxPowerMax 1.3.6.1.4.1.9.9.181.2.3.1.18
This variable indicates the maximum receive power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinDivAntRxPowerMin 1.3.6.1.4.1.9.9.181.2.3.1.19
This variable indicates the minimum receive power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1MinDivAntRxPowerAvg 1.3.6.1.4.1.9.9.181.2.3.1.20
This variable indicates the average received power measured at the diversity antenna during the current operational minute. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrMetricsTable 1.3.6.1.4.1.9.9.181.2.4
This table contains metrics collected over the duration of one hour. This table will have a maximum of 24 entries providing cumulative status of the link, identified by ifIndex, over the past 24 hours. This table is updated once every hour.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpSu1HrMetricsEntry

p2mpSu1HrMetricsEntry 1.3.6.1.4.1.9.9.181.2.4.1
This represents one entry in the p2mpSu1HrMetricsTable indexed by ifIndex of propDocsWirelessDownstream and p2mpSu1HrIndex. The first entry in the table (p2mpSu1HrIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpSu1HrMetricsEntry  

p2mpSu1HrIndex 1.3.6.1.4.1.9.9.181.2.4.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..24  

p2mpSu1HrUpdateTime 1.3.6.1.4.1.9.9.181.2.4.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpSu1HrTotalCodewords 1.3.6.1.4.1.9.9.181.2.4.1.3
This object represents the total received codewords detected from the last Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1HrTotalErrCodewords 1.3.6.1.4.1.9.9.181.2.4.1.4
This object represents the total number of errored codewords received from the last Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSu1HrValidDataPkt 1.3.6.1.4.1.9.9.181.2.4.1.5
This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSu1HrErrorFreeSeconds 1.3.6.1.4.1.9.9.181.2.4.1.6
This object represents the cumulative Codeword Error Free Seconds (EFS) detected from the last Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwErrorFreeSecond  

p2mpSu1HrErroredSeconds 1.3.6.1.4.1.9.9.181.2.4.1.7
This object represents the cumulative Codeword Errored Seconds (ES) detected from the last Link Admin Up time until the current operational hour
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwErroredSecond  

p2mpSu1HrSevErroredSeconds 1.3.6.1.4.1.9.9.181.2.4.1.8
This object represents the cumulative Codeword Severely Errored Seconds (SES) detected from the last Link Admin Up time until the current operational hour
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwSeverelyErroredSecond  

p2mpSu1HrConsecSvErrSeconds 1.3.6.1.4.1.9.9.181.2.4.1.9
This object represents the cumulative Codeword Consecutive Severely Errored Seconds (CSES) detected from the last Link Admin Up time until the current operational hour
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwConsecutiveSevErrSecond  

p2mpSu1HrSyncLossSeconds 1.3.6.1.4.1.9.9.181.2.4.1.10
This object represents the cumulative number of seconds from the last Link Admin Up time to the current operational hour the link was out of synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSu1HrDegradedSeconds 1.3.6.1.4.1.9.9.181.2.4.1.11
This object represents the cumulative Codeword Degraded Seconds detected from the last Link Admin Up time until the current operational hour
Status: current Access: read-only
OBJECT-TYPE    
  CwrCwDegradedSecond  

p2mpSu1HrTxPowerMax 1.3.6.1.4.1.9.9.181.2.4.1.12
This variable indicates the maximum transmit power measured during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrTxPowerMin 1.3.6.1.4.1.9.9.181.2.4.1.13
This variable indicates the minimum transmit power measured during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrTxPowerAvg 1.3.6.1.4.1.9.9.181.2.4.1.14
This variable indicates the average transmit power measured during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrMainAntRxPowerMax 1.3.6.1.4.1.9.9.181.2.4.1.15
This variable indicates the maximum receive power measured at the main antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrMainAntRxPowerMin 1.3.6.1.4.1.9.9.181.2.4.1.16
This variable indicates the minimum receive power measured at the main antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrMainAntRxPowerAvg 1.3.6.1.4.1.9.9.181.2.4.1.17
This variable indicates the average received power measured at the main antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrDivAntRxPowerMax 1.3.6.1.4.1.9.9.181.2.4.1.18
This variable indicates the maximum receive power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrDivAntRxPowerMin 1.3.6.1.4.1.9.9.181.2.4.1.19
This variable indicates the minimum receive power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSu1HrDivAntRxPowerAvg 1.3.6.1.4.1.9.9.181.2.4.1.20
This variable indicates the average received power measured at the diversity antenna during the current operational hour. This is not a cumulative value.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpSuCumulativeLinkMetricsTable 1.3.6.1.4.1.9.9.181.2.6
This table contains metrics used to measure the quality of the radio link identified by the ifIndex. The metrics in this table are cumulated since the last Link Admin Up time.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpSuCumulativeLinkMetricsEntry

p2mpSuCumulativeLinkMetricsEntry 1.3.6.1.4.1.9.9.181.2.6.1
There exists one such entry for every interface in the ifTable which has an ifType of propDocsWirelessDownstream. Each of these entries are indexed by the value of ifIndex as defined in RFC2233.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpSuCumulativeLinkMetricsEntry  

p2mpSuAvailableSeconds 1.3.6.1.4.1.9.9.181.2.6.1.1
This object represents the total number of Available Seconds since the last Link Admin Up time. It is equal to: Error Free Seconds + Errored Seconds - Severely Errored Seconds
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuUnAvailableSeconds 1.3.6.1.4.1.9.9.181.2.6.1.2
This object represents the total number of seconds since the last Link Admin Up time that the link was not available for use. It is equal to: Severely Errored Seconds + Sync Loss Seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuPctAvailSeconds 1.3.6.1.4.1.9.9.181.2.6.1.3
This object represents the ratio of cumulative Available seconds to Link Admin Up seconds, expressed as a percentage.
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuSyncLossSeconds 1.3.6.1.4.1.9.9.181.2.6.1.4
This object represents the number of seconds since the last Link Admin Up time during which the radio link was out of sync with the remote end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuPctErrorFreeSeconds 1.3.6.1.4.1.9.9.181.2.6.1.5
This object represents the ratio of cumulative Codeword Error Free Seconds (EFS) to Link Admin Up seconds, expressed as a percentage.
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuPctErroredSeconds 1.3.6.1.4.1.9.9.181.2.6.1.6
This object represents the ratio of cumulative Codeword Errored Seconds (ES) to Link Admin Up seconds, expressed as a percentage.
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuPctSevErroredSeconds 1.3.6.1.4.1.9.9.181.2.6.1.7
This object represents the ratio of cumulative Codeword Severely Errored Seconds (SES) to Link Admin Up seconds, expressed as a percentage.
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuPctDegradedSeconds 1.3.6.1.4.1.9.9.181.2.6.1.8
This object represents the ratio of degraded seconds (DS) to Link Admin Up seconds, expressed as a percentage.
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpSuInitialSyncSeconds 1.3.6.1.4.1.9.9.181.2.6.1.9
Time spent in acquiring sync for the first time after the link is administratively configured up
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuSyncSuccessCount 1.3.6.1.4.1.9.9.181.2.6.1.10
This object represents the number of times the subscriber unit successfully synchronized with the head end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuLastSyncSuccessTime 1.3.6.1.4.1.9.9.181.2.6.1.11
This object represents elapsed time since the subscriber unit last successfully synchronized with the head end.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

p2mpSuSyncFailureCount 1.3.6.1.4.1.9.9.181.2.6.1.12
This object represents the number of times the subscriber unit attempted, but failed, to synchronize with the head end.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuLastSyncFailTime 1.3.6.1.4.1.9.9.181.2.6.1.13
This object represents elapsed time since the subscriber unit last lost synchronization with the remote end.
Status: current Access: read-only
OBJECT-TYPE    
  TimeInterval  

p2mpSuSyncMedEffort 1.3.6.1.4.1.9.9.181.2.6.1.14
This object indicates how many times sync was regained (since Link Admin Up time) without the subscriber unit having to scan through the channels.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuSyncHighEffort 1.3.6.1.4.1.9.9.181.2.6.1.15
This object indicates how many times the channels were scanned due to sync loss (after first sync at Link Admin Up time).
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

p2mpSuEffectiveDataRate 1.3.6.1.4.1.9.9.181.2.6.1.16
Represents the effective data throughput while the link was last synchronized. For a given bandwidth and throughput selection, it represents the data throughput being achieved.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

p2mpSuPercentEfficiency 1.3.6.1.4.1.9.9.181.2.6.1.17
Represents the ratio of total good codewords received to the total number of codewords received since Link Admin Up, stated as a percentage
Status: current Access: read-only
OBJECT-TYPE    
  CwrPercentageValue  

p2mpHeLinkMetricsThreshTable 1.3.6.1.4.1.9.9.181.3.1
This table contains thresholds that are the trigger points to determine if an excessive number of errored codewords are being transmitted. The thresholds can be set for each upstream channel. This helps determine if a particular upstream channel is experiencing excessive errors. The thresholds can also be set for all the subscriber units communicating with the head end. These thresholds will not be set on a per subscriber basis. Instead, there is only one entry in this table for all the subscriber units.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHeLinkMetricsThreshEntry

p2mpHeLinkMetricsThreshEntry 1.3.6.1.4.1.9.9.181.3.1.1
This represents one entry in the tablei. The first entry in this table is applicable to all the subscriber units communicating with the head end. This entry uses the ifIndex of propDocsWirelessMaclayer. Subsequent entries in this table apply to the upstream channels and are indexed by the ifIndex of propDocsWirelessUpstream.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHeLinkMetricsThreshEntry  

p2mpHe1HrMinTotalCWThresh 1.3.6.1.4.1.9.9.181.3.1.1.1
This object specifies the threshold for the minimum number of total codewords that should be transmitted in an operational hour before the percentage of errored codewords is evaluated against the p2mpHe1HrPctErrCWThresh.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

p2mpHe1HrPctErrCWThresh 1.3.6.1.4.1.9.9.181.3.1.1.2
This object represents the threshold for the acceptable ratio of errored codewords to the total codewords transmitted in an operational hour. For an Upstream Channel: When the percentage of errored codewords to total codewords transmitted on a upstream channel crosses this threshold, the p2mpHeChPctErrCWThreshTrap is sent out (provided the number of total codewords transmitted on the upstream channel in an operational hour, exceeds the value represented by p2mpHe1HrMinTotalCWThresh). For a Subscriber Unit (SU): When the percentage of errored codewords to total codewords transmitted by a SU crosses this threshold, the SU is added to a list of SU's that have also crossed this threshold (provided the number of total codewords transmitted by the SU exceed the value represented by p2mpHe1HrMinTotalCWThresh). The head end sends out the p2mpHeMacPctErrCWThreshTrap to indicate that an SU has been added to the 'bad SU list'.
Status: current Access: read-write
OBJECT-TYPE    
  CwrPercentageValue  

p2mpHeBadSuTable 1.3.6.1.4.1.9.9.181.3.2
This table lists all the subscriber units who have either failed to transmit a minimum number of codewords in an operational hour OR have transmitted a total number of codewords equal to or greater than p2mpHe1HrMinTotalCWThresh but have a codeword error percentage (ratio of errored codewords to the total number of codewords transmitted) greater than p2mpHe1HrPctErrCWThresh.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHeBadSuEntry

p2mpHeBadSuEntry 1.3.6.1.4.1.9.9.181.3.2.1
This represents one entry in the p2mpHeBadSuTable. This entry uses the ifIndex of propDocsWirelessMaclayer. An entry is created in this table when a 'bad' subscriber unit is detected in the managed system. The entry is removed from this table when the subscriber units performance recovers.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHeBadSuEntry  

p2mpBadSuIndex 1.3.6.1.4.1.9.9.181.3.2.1.1
This object, along with the ifIndex of the MAC layer, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..2147483647  

p2mpBadSuUpdateTime 1.3.6.1.4.1.9.9.181.3.2.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpBadSuMacAddress 1.3.6.1.4.1.9.9.181.3.2.1.3
This object identifies the subscriber unit that either failed to transmit a minimum number of codewords in an operational hour OR whose percentage of errored codewords transmitted exceeded the threshold.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

p2mpTotalErroredCodewords 1.3.6.1.4.1.9.9.181.3.2.1.4
This object represents the total errored codewords transmitted by this subscriber unit in the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

p2mpPctErroredCodewords 1.3.6.1.4.1.9.9.181.3.2.1.5
This object represent the percentage of errored codewords to total codewords transmitted by the subscriber unit in the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

p2mpHeCodewordErrorTable 1.3.6.1.4.1.9.9.181.3.3
This table contains codeword error history for the past 24 hours, at 1 hour intervals, on a per subscriber basis. This table will have a maximum of 24 entries providing cumulative status of the link, identified by ifIndex, over the past 24 hours. This table is updated once every hour.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHeCodewordErrorEntry

p2mpHeCodewordErrorEntry 1.3.6.1.4.1.9.9.181.3.3.1
This represents one entry in the p2mpHeCodewordErrorTable indexed by ifIndex of propDocsWirelessMaclayer, the MAC address of the subscriber unit, and p2mpHeCWErrorIndex Every entry represents the cumulative sum of the previous entry plus last hour before the entry is updated. The first entry in the table (p2mpHeCWErrorIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHeCodewordErrorEntry  

p2mpSuMacAddress 1.3.6.1.4.1.9.9.181.3.3.1.1
This object is used to index this table. It indicates the MAC address of the subscriber unit.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

p2mpHeCWErrorIndex 1.3.6.1.4.1.9.9.181.3.3.1.2
This object identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..24  

p2mpHeCWErrorUpdateTime 1.3.6.1.4.1.9.9.181.3.3.1.3
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpTotalCodewords 1.3.6.1.4.1.9.9.181.3.3.1.4
This object represents the total received codewords detected on the subscriber unit identified by p2mpSuMacAddress from Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpErroredCodewords 1.3.6.1.4.1.9.9.181.3.3.1.5
This object represents the total received errored codewords detected on the subscriber unit identified by p2mpSuMacAddress from Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpSINR 1.3.6.1.4.1.9.9.181.3.3.1.6
This object represents the ratio of signal to (interference + noise) from Link Admin Up time until the current operational hour.
Status: current Access: read-only
OBJECT-TYPE    
  CwrFixedPointValue  

p2mpHe1SecMetricsTable 1.3.6.1.4.1.9.9.181.3.4
This table contains metrics collected over the duration of one second. This table will have a maximum of 60 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past one minute. This table is updated once every second.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHe1SecMetricsEntry

p2mpHe1SecMetricsEntry 1.3.6.1.4.1.9.9.181.3.4.1
This represents one entry in the p2mpHe1SecMetricsTable indexed by the ifIndex of propDocsWirelessUpstream and p2mpHe1SecIndex. Every entry represents the cumulative sum of the previous entry plus the last second before the entry is updated. The first entry in the table (p2mpHe1SecIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHe1SecMetricsEntry  

p2mpHe1SecIndex 1.3.6.1.4.1.9.9.181.3.4.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..60  

p2mpHe1SecUpdateTime 1.3.6.1.4.1.9.9.181.3.4.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpHe1SecTotalCodewords 1.3.6.1.4.1.9.9.181.3.4.1.3
This object represents the total number of codewords received on a channel from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpHe1SecErroredCodewords 1.3.6.1.4.1.9.9.181.3.4.1.4
This object represents the total number of errored codewords received on a channel from the last Link Admin Up time until the current operational second.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpHe1MinMetricsTable 1.3.6.1.4.1.9.9.181.3.5
This table contains metrics collected over the duration of one minute. This table will have a maximum of 60 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past one hour. This table is updated once every minute.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHe1MinMetricsEntry

p2mpHe1MinMetricsEntry 1.3.6.1.4.1.9.9.181.3.5.1
This represents one entry in the p2mpHe1MinMetricsTable indexed by ifIndex of propDocsWirelessUpstream and p2mpHe1MinIndex. Every entry represents the cumulative sum of the previous entry plus the last 1 minute before the entry was updated. The first entry in the table (p2mpHe1MinIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHe1MinMetricsEntry  

p2mpHe1MinIndex 1.3.6.1.4.1.9.9.181.3.5.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..60  

p2mpHe1MinUpdateTime 1.3.6.1.4.1.9.9.181.3.5.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpHe1MinTotalCodewords 1.3.6.1.4.1.9.9.181.3.5.1.3
This object represents the cumulative sum of codewords received on a channel from the last Link Admin Up time until the current operational minute.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpHe1MinErroredCodewords 1.3.6.1.4.1.9.9.181.3.5.1.4
This object represents the cumulative sum of errored codewords received on a channel from the last Link Admin Up time until the current operational minute.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpHe1HrMetricsTable 1.3.6.1.4.1.9.9.181.3.6
This table contains metrics collected over the duration of one hour. This table will have a maximum of 24 entries providing cumulative status of the upstream channel, identified by ifIndex of propDocsWirelessUpstream, over the past 24 hours. This table is updated once every hour.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    P2mpHe1HrMetricsEntry

p2mpHe1HrMetricsEntry 1.3.6.1.4.1.9.9.181.3.6.1
This represents one entry in the p2mpHe1HrMetricsTable indexed by ifIndex of propDocsWirelessUpstream and p2mpHe1HrIndex. Every entry represents the cumulative sum of the previous entry plus the last 1 hour before the entry was updated. The first entry in the table (p2mpHe1HrIndex = 1) represents the chronologically oldest data available.
Status: current Access: not-accessible
OBJECT-TYPE    
  P2mpHe1HrMetricsEntry  

p2mpHe1HrIndex 1.3.6.1.4.1.9.9.181.3.6.1.1
This object, along with ifIndex, identifies exactly one entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..24  

p2mpHe1HrUpdateTime 1.3.6.1.4.1.9.9.181.3.6.1.2
This object represents time in seconds since system power up at which time this entry was last updated.
Status: current Access: read-only
OBJECT-TYPE    
  CwrUpdateTime  

p2mpHe1HrTotalCodewords 1.3.6.1.4.1.9.9.181.3.6.1.3
This object represents the total number of codewords received on this channel at the time this entry was updated.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpHe1HrErroredCodewords 1.3.6.1.4.1.9.9.181.3.6.1.4
This object represents the total number of errored codewords received on this channel in the last 1 hour.
Status: current Access: read-only
OBJECT-TYPE    
  WirelessGauge64  

p2mpMetricsMIBNotificationPrefix 1.3.6.1.4.1.9.9.181.1.2
OBJECT IDENTIFIER    

p2mpMetricsMIBNotification 1.3.6.1.4.1.9.9.181.1.2.0
OBJECT IDENTIFIER    

p2mpHeChPctErrCWThreshTrap 1.3.6.1.4.1.9.9.181.1.2.0.1
The p2mpHe1HrPctErrCWThresh for an upstream channel was exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpHeMacPctErrCWThreshTrap 1.3.6.1.4.1.9.9.181.1.2.0.2
The p2mpHe1HrPctErrCWThresh for the subscriber unit was exceeded. The subscriber unit was added to the p2mpHeBadSuTable.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpSuErrSecAlarmTrap 1.3.6.1.4.1.9.9.181.1.2.0.3
The p2mpSuLink1HrESAlarmThresh was exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpSuSevErrSecAlarmTrap 1.3.6.1.4.1.9.9.181.1.2.0.4
The p2mpSuLink1HrSESAlarmThresh was exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpSuConsecSevErrSecAlarmTrap 1.3.6.1.4.1.9.9.181.1.2.0.5
The p2mpSuLink1HrCSESAlarmThresh was exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpSuDegradedSecAlarmTrap 1.3.6.1.4.1.9.9.181.1.2.0.6
The p2mpSuLink1HrDCSAlarmThresh was exceeded.
Status: current Access: read-only
NOTIFICATION-TYPE    

p2mpRadioLinkConformance 1.3.6.1.4.1.9.9.181.4
OBJECT IDENTIFIER    

p2mpRadioLinkCompliances 1.3.6.1.4.1.9.9.181.4.1
OBJECT IDENTIFIER    

p2mpRadioLinkGroups 1.3.6.1.4.1.9.9.181.4.2
OBJECT IDENTIFIER    

p2mpRadioLinkCompliance 1.3.6.1.4.1.9.9.181.4.1.1
The compliance statement for devices implementing the Point to MultiPoint wireless interface compliant to Cisco Systems Inc. specification.
Status: current Access: read-only
MODULE-COMPLIANCE    

p2mpComplianceLinkMetricsGroup 1.3.6.1.4.1.9.9.181.4.2.1
Objects implemented to indicate scaling factors for fixed point values. This group is mandatory on the Head End and the Subscriber Unit.
Status: current Access: read-only
OBJECT-GROUP    

p2mpComplianceSuMetricsGroup 1.3.6.1.4.1.9.9.181.4.2.2
Group of objects implemented at the Subscriber unit.
Status: current Access: read-only
OBJECT-GROUP    

p2mpComplianceHeMetricsGroup 1.3.6.1.4.1.9.9.181.4.2.3
Group of objects implemented at the Head End.
Status: current Access: read-only
OBJECT-GROUP    

p2mpComplianceNotifGroup 1.3.6.1.4.1.9.9.181.4.2.4
Group of notifications which indicate that a threshold was exceeded.
Status: current Access: read-only
NOTIFICATION-GROUP