CISCO-WAN-CES-RSRC-PART-MIB

File: CISCO-WAN-CES-RSRC-PART-MIB.mib (8618 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF CISCO-WAN-CES-PORT-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP cesmPort
ciscoWan

Defined Types

CesmPortCnfResPartGrpEntry  
SEQUENCE    
  cesmResPartPortNum Integer32
  cesmResPartCtrlrNum INTEGER
  cesmResPartRowStatus INTEGER
  cesmResPartNumOfLcnAvail Integer32
  cesmResPartLcnLow Integer32
  cesmResPartLcnHigh Integer32
  cesmResPartIngrPctBW Integer32
  cesmResPartEgrPctBW Integer32
  cesmResPartCtrlrID Integer32

Defined Values

ciscoWanCesRsrcPartMIB 1.3.6.1.4.1.351.150.41
The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service modules providing the Circuit Emulation Services.
MODULE-IDENTITY    

cesmPortCnfResPartGrp 1.3.6.1.4.1.351.110.5.3.1.2
OBJECT IDENTIFIER    

cesmPortCnfResPartGrpTable 1.3.6.1.4.1.351.110.5.3.1.2.1
This table is for configuring the resource partition parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CesmPortCnfResPartGrpEntry

cesmPortCnfResPartGrpEntry 1.3.6.1.4.1.351.110.5.3.1.2.1.1
An entry for a resource partition. A resource partition have to be created before connections can be added to the logical ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  CesmPortCnfResPartGrpEntry  

cesmResPartPortNum 1.3.6.1.4.1.351.110.5.3.1.2.1.1.1
The value of this object identifies the CES port. The value of this object must be same as the value of 'cesPortNum' from cesmPortCnfGrpTable.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2048  

cesmResPartCtrlrNum 1.3.6.1.4.1.351.110.5.3.1.2.1.1.2
This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Release 2.x. tag(3) : MPLS(Formerly known as Tag Switch)Controller
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER par(1), pnni(2), tag(3)  

cesmResPartRowStatus 1.3.6.1.4.1.351.110.5.3.1.2.1.1.3
This object is used for adding/deleting/modifying resource partition on a CES port. In MGX Release 1.x: To add an entry, this object should be set to add(1), value for other objects should not be specified. In MGX Release 2.x: To add an entry, this object should be set to add(1). To delete an entry, this object has to be set to del(2). The resource partition can be deleted only after deleting all the connections (LCNs).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER add(1), del(2), mod(3)  

cesmResPartNumOfLcnAvail 1.3.6.1.4.1.351.110.5.3.1.2.1.1.4
This represents number of LCNs available for this controller and this port. In CESM-T3/E3 and 8-T1/E1,this value is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2048  

cesmResPartLcnLow 1.3.6.1.4.1.351.110.5.3.1.2.1.1.5
This represents low end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2048  

cesmResPartLcnHigh 1.3.6.1.4.1.351.110.5.3.1.2.1.1.6
This represents high end of reserved LCN In CESM-8T1/E1 and T3/E3, this refers to the logical port.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..2048  

cesmResPartIngrPctBW 1.3.6.1.4.1.351.110.5.3.1.2.1.1.7
The percentage of total ingress bandwidth reserved. In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

cesmResPartEgrPctBW 1.3.6.1.4.1.351.110.5.3.1.2.1.1.8
The percentage of total egress bandwidth reserved In CESM-8T1/E1 and T3/E3, as there is only one LCN per port and it could be used by only one controller,this value is 100% for that controller.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..100  

cesmResPartCtrlrID 1.3.6.1.4.1.351.110.5.3.1.2.1.1.9
This is the controller identifier for the resource patition. The default value is set for PNNI controller.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

cwcRsrcPartMIBConformance 1.3.6.1.4.1.351.150.41.2
OBJECT IDENTIFIER    

cwcRsrcPartMIBCompliances 1.3.6.1.4.1.351.150.41.2.1
OBJECT IDENTIFIER    

cwcRsrcPartMIBGroups 1.3.6.1.4.1.351.150.41.2.2
OBJECT IDENTIFIER    

ciscoWanCesRsrcPartCompliance 1.3.6.1.4.1.351.150.41.2.1.1
The compliance statement for entities which implement the Broad band Interface Resource Partition MIB.
Status: current Access: read-write
MODULE-COMPLIANCE    

ciscoWanCesRsrcPartGroup 1.3.6.1.4.1.351.150.41.2.2.1
A collection of objects providing the resource partition configuration on CES ports.
Status: current Access: read-write
OBJECT-GROUP