CISCO-WAN-BBIF-ATM-CONN-STAT-MIB

File: CISCO-WAN-BBIF-ATM-CONN-STAT-MIB.mib (10275 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF BASIS-MIB
CISCOWAN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
bbChanCntGrp ciscoWan

Defined Types

BbChanCntGrpEntry  
SEQUENCE    
  bbChanCntNum Integer32
  bbChanRcvClp0Cells Counter32
  bbChanRcvClp1Cells Counter32
  bbChanNonConformCellsAtGcra1Policer Counter32
  bbChanNonConformCellsAtGcra2Policer Counter32
  bbChanRcvEOFCells Counter32
  bbChanDscdClp0Cells Counter32
  bbChanDscdClp1Cells Counter32
  bbChanRcvCellsSent Counter32
  bbChanXmtClp0Cells Counter32
  bbChanXmtClp1Cells Counter32
  bbChanDscdClpZeroCellsToPort Counter32
  bbChanDscdClpOneCellsToPort Counter32
  bbChanCntClrButton INTEGER

Defined Values

ciscoWanBbifAtmConnStatMIB 1.3.6.1.4.1.351.150.36
This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1 service module. in MGX82xx products. Logical Channel refers to ATM Connection(or connection end point). Terminologies used: broadband interface - Logical port on PXM1. SCR - Sustained Cell Rate BT - Burst Tolerance PCR - Peak Cell Rate CDVT - Cell Delay Transfer Variance Tolerance GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract. For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. GCRA1 - GCRA Bucket 1. For CBR and UBR connections, only GCRA-1 is needed to check for PCR, CDVT Conformance. GCRA2 - GCRA Bucket 2. For VBR and ABR Connections, GCRA-1 is needed to check for PCR, CDVT conformance and GCRA-2 for SCR, BT Conformance. EFCI - Explicit Forward Congestion Indication. QE - Queue Engine(QE). This ASIC Provides the traffic management functions related to VC queues, QoS queues and interface queues. This management function is performed for both directions of traffic(ingress, egress). ingress - ingress traffic is defined as data flowing toward the switch fabric. Ingress data can come from either the Service Modules through the backplane or the PXM1 Uplink back card. egress - Egress traffic is defined as data flowing away from the switch fabric.
MODULE-IDENTITY    

bbChanCntGrpTable 1.3.6.1.4.1.351.110.5.2.7.3.1
This is the broadband channel statistics table.
OBJECT-TYPE    
  SEQUENCE OF  
    BbChanCntGrpEntry

bbChanCntGrpEntry 1.3.6.1.4.1.351.110.5.2.7.3.1.1
An entry for statistics on logical channel. Each entry contains statistics for an ATM connection on broadband interface.
OBJECT-TYPE    
  BbChanCntGrpEntry  

bbChanCntNum 1.3.6.1.4.1.351.110.5.2.7.3.1.1.1
This object identifies the logical channel number. The value for this object must be same as the value of 'bbChanCnfNum' from bbChanCnfGrpTable.
OBJECT-TYPE    
  Integer32 16..4111  

bbChanRcvClp0Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.2
CLP_0 Cells Received from broadband interface.
OBJECT-TYPE    
  Counter32  

bbChanRcvClp1Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.3
CLP_1 Cells Received from broadband interface.
OBJECT-TYPE    
  Counter32  

bbChanNonConformCellsAtGcra1Policer 1.3.6.1.4.1.351.110.5.2.7.3.1.1.4
This object provides a count of the nonconforming cells that are received at the first policing point(GCRA1 policer).
OBJECT-TYPE    
  Counter32  

bbChanNonConformCellsAtGcra2Policer 1.3.6.1.4.1.351.110.5.2.7.3.1.1.5
This object provides a count of the nonconforming cells that are received at the second policing point(GCRA2 policer).
OBJECT-TYPE    
  Counter32  

bbChanRcvEOFCells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.6
This object provides count of End Of Frame(EOF) cells that are received.
OBJECT-TYPE    
  Counter32  

bbChanDscdClp0Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.7
This object provides a count of the CLP equal to 0 that are received and then discarded.
OBJECT-TYPE    
  Counter32  

bbChanDscdClp1Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.8
This object provides a count of the CLP equal to 1 that are received and then discarded.
OBJECT-TYPE    
  Counter32  

bbChanRcvCellsSent 1.3.6.1.4.1.351.110.5.2.7.3.1.1.9
Number of cells received from broadband interface and sent out of the Queue Engine(QE device).
OBJECT-TYPE    
  Counter32  

bbChanXmtClp0Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.10
This object provides count of Number of cells with EFCI=0 that are transmitted.
OBJECT-TYPE    
  Counter32  

bbChanXmtClp1Cells 1.3.6.1.4.1.351.110.5.2.7.3.1.1.11
This object provides count of Number of cells with EFCI set that are transmitted.
OBJECT-TYPE    
  Counter32  

bbChanDscdClpZeroCellsToPort 1.3.6.1.4.1.351.110.5.2.7.3.1.1.12
Number of CLP = 0 cells discarded before transmitted to broadband interface.
OBJECT-TYPE    
  Counter32  

bbChanDscdClpOneCellsToPort 1.3.6.1.4.1.351.110.5.2.7.3.1.1.13
Number of CLP = 1 cells discarded before transmitted to broadband interface.
OBJECT-TYPE    
  Counter32  

bbChanCntClrButton 1.3.6.1.4.1.351.110.5.2.7.3.1.1.14
Writing a value of 2 resets all the counters.
OBJECT-TYPE    
  INTEGER noAction(1), resetCounters(2)  

cwbAtmConnStatMIBConformance 1.3.6.1.4.1.351.150.36.2
OBJECT IDENTIFIER    

cwbAtmConnStatMIBGroups 1.3.6.1.4.1.351.150.36.2.1
OBJECT IDENTIFIER    

cwbAtmConnStatMIBCompliances 1.3.6.1.4.1.351.150.36.2.2
OBJECT IDENTIFIER    

cwbAtmConnStatCompliance 1.3.6.1.4.1.351.150.36.2.2.1
The compliance statement for broadband interface Connection Statstics MIB.
MODULE-COMPLIANCE    

cwbAtmConnStatsGroup 1.3.6.1.4.1.351.150.36.2.1.1
The objects related to broadband interface connection statistics.
OBJECT-GROUP