CISCO-VIRTUAL-SWITCH-MIB

File: CISCO-VIRTUAL-SWITCH-MIB.mib (62381 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ENTITY-MIB SNMP-FRAMEWORK-MIB IF-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 Counter32 Counter64
MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
TEXTUAL-CONVENTION RowStatus TimeStamp
DateAndTime TruthValue entPhysicalIndex
SnmpAdminString InterfaceIndex ciscoMgmt

Defined Types

VSSwitchID  
An integer value that uniquely identifies a physical chassis in the virtual switch architecture. 0 means no switch ID configured for this switch. It implies the switch is in the standalone mode and not part of the virtual switch architecture.
TEXTUAL-CONVENTION    
  Unsigned32  

VSSwitchCapability  
Indication of the switch roles that can be supported on the chassis device. standalone : it means this chassis device can be a regular switch which is not a part of virtual switch architecture. core : it means this chassis device can be a core switch, active or standby, in the virtual switch architecture.
TEXTUAL-CONVENTION    
  BITS standalone(0), core(1)  

VSSwitchMode  
The switch mode of the chassis device in the virtual switch environment or a chassis can also be a standalone device. standalone : it means this chassis device is not in a part of the virtual switch environment, it is a standalone switch. multiNode: it means this chassis device is in a part of the virtual switch environment. Only a switch with the capability to be a 'core' switch could be configured to multiNode(2).
TEXTUAL-CONVENTION    
  INTEGER standalone(1), multiNode(2)  

VSSwitchRole  
The role of the chassis device. standalone : it means this chassis device is not a part of the virtual switch, it is a standalone switch. active : it means this chassis device is an active core switch in the virtual switch architecture. standby : it means this chassis device is a standby core switch in the virtual switch architecture.
TEXTUAL-CONVENTION    
  INTEGER standalone(1), active(2), standby(3)  

VSConnectStatus  
A textual convention to indicate the connection status of a link.
TEXTUAL-CONVENTION    
  INTEGER up(1), down(2)  

CvsCoreSwitchConfigEntry  
SEQUENCE    
  cvsCoreSwitchID VSSwitchID
  cvsCoreSwitchPriority Unsigned32
  cvsCoreSwitchPreempt TruthValue
  cvsCoreSwitchLocation SnmpAdminString

CvsChassisEntry  
SEQUENCE    
  cvsChassisSwitchID VSSwitchID
  cvsChassisRole VSSwitchRole
  cvsChassisUpTime TimeStamp

CvsVSLConnectionEntry  
SEQUENCE    
  cvsVSLChannelIfindex InterfaceIndex
  cvsVSLCoreSwitchID VSSwitchID
  cvsVSLConnectOperStatus VSConnectStatus
  cvsVSLLastConnectionStateChange DateAndTime
  cvsVSLConfiguredPortCount Unsigned32
  cvsVSLOperationalPortCount Unsigned32
  cvsVSLConnectionRowStatus RowStatus

CvsVSLStatsEntry  
SEQUENCE    
  cvsVSLTxTotalPkts Counter32
  cvsVSLTxErrorPkts Counter32
  cvsVSLTxChksumErrPkts Counter32
  cvsVSLRxTotalPkts Counter32
  cvsVSLRxErrorPkts Counter32
  cvsVSLRxChksumErrPkts Counter32
  cvsVSLTxLmpPkts Counter64
  cvsVSLTxRrpPkts Counter64
  cvsVSLTxPingPkts Counter64
  cvsVSLTxProtoPkts Counter64
  cvsVSLTxDataPkts Counter64
  cvsVSLTxAckPkts Counter64
  cvsVSLRxLmpPkts Counter64
  cvsVSLRxRrpPkts Counter64
  cvsVSLRxPingPkts Counter64
  cvsVSLRxProtoPkts Counter64
  cvsVSLRxDataPkts Counter64
  cvsVSLRxAckPkts Counter64
  cvsVSLTxTotalEobcPkts Counter64
  cvsVSLTxLmpEobcPkts Counter64
  cvsVSLTxRrpEobcPkts Counter64
  cvsVSLTxPingEobcPkts Counter64
  cvsVSLTxProtoEobcPkts Counter64
  cvsVSLTxDataEobcPkts Counter64
  cvsVSLTxAckEobcPkts Counter64
  cvsVSLRxTotalEobcPkts Counter64
  cvsVSLRxLmpEobcPkts Counter64
  cvsVSLRxRrpEobcPkts Counter64
  cvsVSLRxPingEobcPkts Counter64
  cvsVSLRxProtoEobcPkts Counter64
  cvsVSLRxDataEobcPkts Counter64
  cvsVSLRxAckEobcPkts Counter64
  cvsVSLTxTotalHCPkts Counter64
  cvsVSLTxErrorHCPkts Counter64
  cvsVSLTxChksumErrHCPkts Counter64
  cvsVSLRxTotalHCPkts Counter64
  cvsVSLRxErrorHCPkts Counter64
  cvsVSLRxChksumErrHCPkts Counter64

CvsVSLPortStatsEntry  
SEQUENCE    
  cvsVSLPortStatsIfindex InterfaceIndex
  cvsVSLPortTxOkPkts Counter32
  cvsVSLPortTxFailPkts Counter32
  cvsVSLPortRxBidirPkts Counter32
  cvsVSLPortRxUnidirPkts Counter32
  cvsVSLPortRxFailPkts Counter32
  cvsVSLPortRxBadPkts Counter32
  cvsVSLPortRxMyInfoMismatchPkts Counter32
  cvsVSLPortRxMyInfoAbsentPkts Counter32
  cvsVSLPortRxBadMacAddressPkts Counter32
  cvsVSLPortRxBadSwitchIdPkts Counter32
  cvsVSLPortRxDomainIdMismatchPkts Counter32
  cvsVSLPortRxPeerInfoMismatchPkts Counter32

CvsVSLLinkPortEntry  
SEQUENCE    
  cvsVSLLinkPeerInterface SnmpAdminString

CvsModuleEntry  
SEQUENCE    
  cvsModuleVSSupported TruthValue
  cvsModuleVSLCapable TruthValue
  cvsModuleSlotNumber Unsigned32
  cvsModuleRprWarm INTEGER

Defined Values

ciscoVirtualSwitchMIB 1.3.6.1.4.1.9.9.388
This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines several individual distributed physical switches together to build a single logical management point. The core switches are the control point for a virtual switch, all the traffic is forwarded and distributed in the core switches, including control and data traffic. The core switches are connected through a dedicated ether channel called Virtual Switch Link (VSL) that is used for both control traffic as well as some data traffic to provide the traffic load sharing and switch redundancy between the physical chassis. One or multiple core switches can be supported in the virtual switch architecture, but only one core called 'active core' switch can be active to manage the traffic. The other is called 'standby core' switch as redundancy if there is. The concept of virtual switch is to collect many physical switches chassis together to form a single management unit to simplify the whole network architecture.
MODULE-IDENTITY    

ciscoVirtualSwitchMIBNotifs 1.3.6.1.4.1.9.9.388.0
OBJECT IDENTIFIER    

ciscoVirtualSwitchMIBObjects 1.3.6.1.4.1.9.9.388.1
OBJECT IDENTIFIER    

ciscoVirtualSwitchMIBConform 1.3.6.1.4.1.9.9.388.2
OBJECT IDENTIFIER    

cvsGlobalObjects 1.3.6.1.4.1.9.9.388.1.1
OBJECT IDENTIFIER    

cvsChassisObjects 1.3.6.1.4.1.9.9.388.1.2
OBJECT IDENTIFIER    

cvsVSLObjects 1.3.6.1.4.1.9.9.388.1.3
OBJECT IDENTIFIER    

cvsModuleObjects 1.3.6.1.4.1.9.9.388.1.4
OBJECT IDENTIFIER    

cvsDualActiveDetection 1.3.6.1.4.1.9.9.388.1.5
OBJECT IDENTIFIER    

cvsDomain 1.3.6.1.4.1.9.9.388.1.1.1
The virtual switch domain identifier to recognize a virtual switch domain. Only Switches with the same domain number can be in the same virtual switch. 0 means no switch domain configured.
OBJECT-TYPE    
  Unsigned32  

cvsSwitchID 1.3.6.1.4.1.9.9.388.1.1.2
The unique ID which is assigned to the current switch for identifying this physical chassis as a core switch in the virtual switch architecture. 0 means no switch ID configured.
OBJECT-TYPE    
  VSSwitchID  

cvsSwitchCapability 1.3.6.1.4.1.9.9.388.1.1.3
The capability of the switch can be. A physical chassis can be a standalone switch in the normal environment or a switch which is part of the virtual switch architecture.
OBJECT-TYPE    
  VSSwitchCapability  

cvsSwitchMode 1.3.6.1.4.1.9.9.388.1.1.4
Converting a standalone switch in the regular switch architecture to a switch in the virtual switch architecture. Or converting a switch in the virtual switch architecture to a standalone switch in the regular switch architecture. And the value of this object can only be set to one of mode where the corresponding bits in cvsSwitchCapability is set. To prevent vague switch status, this action will not only change the switch mode, but also reload the device automatically to activate to the new switch mode.
OBJECT-TYPE    
  VSSwitchMode  

cvsSwitchConvertingStatus 1.3.6.1.4.1.9.9.388.1.1.5
Indicating whether the switch is in the process of converting the mode of switch which is specified in the object cvsSwitchMode. true(1) : the switch is in converting the switch mode. false(2) : the switch is not in converting the switch mode.
OBJECT-TYPE    
  TruthValue  

cvsVSLChangeNotifEnable 1.3.6.1.4.1.9.9.388.1.1.6
Enable or disable the generation of cvsVSLConnectionChangeNotif notification.
OBJECT-TYPE    
  TruthValue  

cvsCoreSwitchConfigTable 1.3.6.1.4.1.9.9.388.1.2.1
This table describes the configuration information for the core switches to select the active or standby core switches in the virtual switch architecture. If cvsDomain or cvsSwitchID objects are configured to 0, this table is not instantiated.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsCoreSwitchConfigEntry

cvsCoreSwitchConfigEntry 1.3.6.1.4.1.9.9.388.1.2.1.1
An entry describes the configuration for a core switch information in the virtual switch architecture.
OBJECT-TYPE    
  CvsCoreSwitchConfigEntry  

cvsCoreSwitchID 1.3.6.1.4.1.9.9.388.1.2.1.1.1
The switch number as an identifier for a core switch. If the priority value is the same, the higher switch number has the precedence to be the active core switch.
OBJECT-TYPE    
  VSSwitchID  

cvsCoreSwitchPriority 1.3.6.1.4.1.9.9.388.1.2.1.1.2
The configured priority information for this core switch. This priority value will be used to choose active or standby core switch. The core switch with the higher numerical value will be more desirable to be chosen as an active core switch.
OBJECT-TYPE    
  Unsigned32  

cvsCoreSwitchPreempt 1.3.6.1.4.1.9.9.388.1.2.1.1.3
The configured preemption information for this core switch. This configuration will enable or disable the preemption of choosing the active core with higher priority.
OBJECT-TYPE    
  TruthValue  

cvsCoreSwitchLocation 1.3.6.1.4.1.9.9.388.1.2.1.1.4
The configured location for this core switch.
OBJECT-TYPE    
  SnmpAdminString  

cvsChassisTable 1.3.6.1.4.1.9.9.388.1.2.2
This table describes the information of the devices listed in the ENTITY-MIB entPhysicalTable in the virtual switch architecture, whose entPhysicalClass is chassis(3). This table will only be instantiated when the value of cvsSwitchMode is 'multiNode' in the virtual switch architecture.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsChassisEntry

cvsChassisEntry 1.3.6.1.4.1.9.9.388.1.2.2.1
An entry describes the present chassis information in the virtual switch architecture.
OBJECT-TYPE    
  CvsChassisEntry  

cvsChassisSwitchID 1.3.6.1.4.1.9.9.388.1.2.2.1.1
The unique switch ID which is assigned for identifying a chassis in the virtual switch architecture.
OBJECT-TYPE    
  VSSwitchID  

cvsChassisRole 1.3.6.1.4.1.9.9.388.1.2.2.1.2
This object indicates the role of this chassis in the virtual switch architecture.
OBJECT-TYPE    
  VSSwitchRole  

cvsChassisUpTime 1.3.6.1.4.1.9.9.388.1.2.2.1.3
The time (in hundredths of a second) since the chassis device was last re-initialized.
OBJECT-TYPE    
  TimeStamp  

cvsVSLConnectionTable 1.3.6.1.4.1.9.9.388.1.3.1
This table contains the VSLs (Virtual Switch Link) connection information of the core switches. A bundle link is a collection of two or more physical point-to-point links which are combined to form one logical link. A VSL is a bundle link which spans the core switch to connect to another core switch in the virtual switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsVSLConnectionEntry

cvsVSLConnectionEntry 1.3.6.1.4.1.9.9.388.1.3.1.1
The entry contains connections information of the VSL channel interfaces between the core switches.
OBJECT-TYPE    
  CvsVSLConnectionEntry  

cvsVSLChannelIfindex 1.3.6.1.4.1.9.9.388.1.3.1.1.1
The interface index of the VSL channel interface in the core switch to be used for the VSL.
OBJECT-TYPE    
  InterfaceIndex  

cvsVSLCoreSwitchID 1.3.6.1.4.1.9.9.388.1.3.1.1.2
The switch ID will be used to form the VSL.
OBJECT-TYPE    
  VSSwitchID  

cvsVSLConnectOperStatus 1.3.6.1.4.1.9.9.388.1.3.1.1.3
This object indicates the operational status of the VSL connection.
OBJECT-TYPE    
  VSConnectStatus  

cvsVSLLastConnectionStateChange 1.3.6.1.4.1.9.9.388.1.3.1.1.4
The last time when the VSL connection was changed from up to down or down to up.
OBJECT-TYPE    
  DateAndTime  

cvsVSLConfiguredPortCount 1.3.6.1.4.1.9.9.388.1.3.1.1.5
The number of configured ports for this VSL.
OBJECT-TYPE    
  Unsigned32  

cvsVSLOperationalPortCount 1.3.6.1.4.1.9.9.388.1.3.1.1.6
The number of operational ports for this VSL.
OBJECT-TYPE    
  Unsigned32  

cvsVSLConnectionRowStatus 1.3.6.1.4.1.9.9.388.1.3.1.1.7
This object is a conceptual row entry that allows creating or removing entries in or from the cvsVSLConnectionTable. Creating an entry in this table means building the VSL connection and removing an entry means to remove the VSL connection.
OBJECT-TYPE    
  RowStatus  

cvsVSLStatsTable 1.3.6.1.4.1.9.9.388.1.3.2
This table contains the VSL (Virtual Switch Link) connection statistics information between the core switches in the virtual switch architecture. This table will only show the statistics information for the channel interface in the active core switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsVSLStatsEntry

cvsVSLStatsEntry 1.3.6.1.4.1.9.9.388.1.3.2.1
The entry contains transmitting and receiving statistics information of the VSL channel interface in the active core switch.
OBJECT-TYPE    
  CvsVSLStatsEntry  

cvsVSLTxTotalPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.1
The total number of transmitted packets.
OBJECT-TYPE    
  Counter32  

cvsVSLTxErrorPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.2
The number of transmitted error packets.
OBJECT-TYPE    
  Counter32  

cvsVSLTxChksumErrPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.3
The number of transmitted packets with checksum error.
OBJECT-TYPE    
  Counter32  

cvsVSLRxTotalPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.4
The total number of received packets.
OBJECT-TYPE    
  Counter32  

cvsVSLRxErrorPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.5
The number of received error packets.
OBJECT-TYPE    
  Counter32  

cvsVSLRxChksumErrPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.6
The number of received packets with checksum error.
OBJECT-TYPE    
  Counter32  

cvsVSLTxLmpPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.7
The number of transmitted LMP (Link Maintenance Protocol) packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxRrpPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.8
The number of transmitted RRP (Role Resolution Protocol) packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxPingPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.9
The number of transmitted VSL PING packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxProtoPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.10
The number of transmitted protocol packets, such as ISSU's (In Service software Upgrade) protocol.
OBJECT-TYPE    
  Counter64  

cvsVSLTxDataPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.11
The number of transmitted data packets, such as ISSU's .
OBJECT-TYPE    
  Counter64  

cvsVSLTxAckPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.12
The number of transmitted ACK (Acknowledge) packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxLmpPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.13
The number of received LMP packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxRrpPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.14
The number of received RRP packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxPingPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.15
The number of received VSL PING packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxProtoPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.16
The number of received ISSU's protocol packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxDataPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.17
The number of received ISSU's data packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxAckPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.18
The number of received ACK packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxTotalEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.19
The total number of transmitted EOBC (Ethernet Out-of-Band Channel) packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxLmpEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.20
The number of transmitted LMP EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxRrpEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.21
The number of transmitted RRP EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxPingEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.22
The number of transmitted VSL PING EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxProtoEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.23
The number of transmitted ISSU's protocol EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxDataEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.24
The number of transmitted ISSU's data EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxAckEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.25
The number of transmitted ACK EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxTotalEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.26
The total number of received EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxLmpEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.27
The number of received LMP EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxRrpEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.28
The number of received RRP EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxPingEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.29
The number of received VSL PING EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxProtoEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.30
The number of received ISSU's protocol EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxDataEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.31
The number of received ISSU's data EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxAckEobcPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.32
The number of received ACK EOBC packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxTotalHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.33
The high capacity counter for the total number of transmitted packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxErrorHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.34
The high capacity counter for the total number of transmitted error packets.
OBJECT-TYPE    
  Counter64  

cvsVSLTxChksumErrHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.35
The high capacity counter for the number of transmitted packets with checksum error.
OBJECT-TYPE    
  Counter64  

cvsVSLRxTotalHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.36
The high capacity counter for the total number of received packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxErrorHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.37
The high capacity counter for the number of received error packets.
OBJECT-TYPE    
  Counter64  

cvsVSLRxChksumErrHCPkts 1.3.6.1.4.1.9.9.388.1.3.2.1.38
The high capacity counter for the number of received received packets with checksum error.
OBJECT-TYPE    
  Counter64  

cvsVSLPortStatsTable 1.3.6.1.4.1.9.9.388.1.3.3
This table contains the statistics information for the configured physical ports of the VSL (Virtual Switch Link) connection in the active core switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsVSLPortStatsEntry

cvsVSLPortStatsEntry 1.3.6.1.4.1.9.9.388.1.3.3.1
The entry contains transmitting and receiving statistics information for a configured physical port of the VSL channel interface in the active core switch.
OBJECT-TYPE    
  CvsVSLPortStatsEntry  

cvsVSLPortStatsIfindex 1.3.6.1.4.1.9.9.388.1.3.3.1.1
The interface index for the configured physical port in the VSL.
OBJECT-TYPE    
  InterfaceIndex  

cvsVSLPortTxOkPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.2
The number of transmitted packets without errors for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortTxFailPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.3
The number of transmitted packets that had local sending failures, such as out of buffers and other internal errors for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxBidirPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.4
The number of received packets indicating a bidirectional link for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxUnidirPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.5
The number of received packets that do not indicate a bidirectional link for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxFailPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.6
The number of received packets with incorrect data for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxBadPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.7
The number of received packets with in invalid states for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxMyInfoMismatchPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.8
The number of received packets with mismatched local switch information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxMyInfoAbsentPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.9
The number of received packets without local switch information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxBadMacAddressPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.10
The number of received packets with bad MAC addresses information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxBadSwitchIdPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.11
The number of received packets with bad switch IDs information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxDomainIdMismatchPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.12
The number of received packets with mismatched domain IDs information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLPortRxPeerInfoMismatchPkts 1.3.6.1.4.1.9.9.388.1.3.3.1.13
The number of received packets with mismatched peer information for the port.
OBJECT-TYPE    
  Counter32  

cvsVSLLinkPortTable 1.3.6.1.4.1.9.9.388.1.3.4
This table contains the information for the configured physical ports of the VSL (Virtual Switch Link) connections in the active core switch and standby switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsVSLLinkPortEntry

cvsVSLLinkPortEntry 1.3.6.1.4.1.9.9.388.1.3.4.1
The entry contains the information for the configured physical ports of the VSL (Virtual Switch Link) connections in the active core switch and standby switch.
OBJECT-TYPE    
  CvsVSLLinkPortEntry  

cvsVSLLinkPeerInterface 1.3.6.1.4.1.9.9.388.1.3.4.1.1
This object displays the interface name of the peer interface.
OBJECT-TYPE    
  SnmpAdminString  

cvsModuleTable 1.3.6.1.4.1.9.9.388.1.4.1
This table describes the information of the physical modules listed in the ENTITY-MIB entPhysicalTable, whose entPhysicalClass is module(9). This table only contains physical linecards, no sub-linecards or port level module entities.
OBJECT-TYPE    
  SEQUENCE OF  
    CvsModuleEntry

cvsModuleEntry 1.3.6.1.4.1.9.9.388.1.4.1.1
An entry describes the present physical module information.
OBJECT-TYPE    
  CvsModuleEntry  

cvsModuleVSSupported 1.3.6.1.4.1.9.9.388.1.4.1.1.1
The physical module is supported in the virtual switch architecture or not.
OBJECT-TYPE    
  TruthValue  

cvsModuleVSLCapable 1.3.6.1.4.1.9.9.388.1.4.1.1.2
The physical module has the capability to build the VSL connection between 2 core switches in the virtual switch architecture or not. If any physical port in this physical module is with the capability to build the VSL connection, it means this module is VSL capable.
OBJECT-TYPE    
  TruthValue  

cvsModuleSlotNumber 1.3.6.1.4.1.9.9.388.1.4.1.1.3
The module slot number for this physical module. If it is in the virtual switch environment, this object returns virtual slot number. If it is in the standalone environment, this object returns physical slot number.
OBJECT-TYPE    
  Unsigned32  

cvsModuleRprWarm 1.3.6.1.4.1.9.9.388.1.4.1.1.4
The object indicates in-chassis standby supervisor module's redundancy state in a VS environment. 'notApplicable' : the module is not applicable for the rest of states. 'rprWarm' : the module is the in-chassis standby supervisor in rpr warm state running as a DFC (Distributed Forwarding Card). 'cSSO' : the module is the in-chassis hot standby supervisor
OBJECT-TYPE    
  INTEGER notApplicable(1), rprWarm(2), cSSO(3)  

cvsDualActiveDetectionNotifEnable 1.3.6.1.4.1.9.9.388.1.5.1
Enable or disable the generation of cvsDualActiveDetectionNotif notification.
OBJECT-TYPE    
  TruthValue  

cvsDualActiveDetectionInformation 1.3.6.1.4.1.9.9.388.1.5.2
This object provides information about the dual active notification cvsDualActiveDetectionNotif, i.e., the cause of dual-active, the detection method.
OBJECT-TYPE    
  SnmpAdminString  

cvsVSLConnectionChangeNotif 1.3.6.1.4.1.9.9.388.0.1
The notification will be generated when the state of the VSL connection is changed.
NOTIFICATION-TYPE    

cvsDualActiveDetectionNotif 1.3.6.1.4.1.9.9.388.0.2
The notification will be generated when dual-active is detected.
NOTIFICATION-TYPE    

cvsMIBCompliances 1.3.6.1.4.1.9.9.388.2.1
OBJECT IDENTIFIER    

cvsMIBGroups 1.3.6.1.4.1.9.9.388.2.2
OBJECT IDENTIFIER    

cvsMIBCompliance 1.3.6.1.4.1.9.9.388.2.1.1
The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
MODULE-COMPLIANCE    

cvsMIBComplianceV02 1.3.6.1.4.1.9.9.388.2.1.2
The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
MODULE-COMPLIANCE    

cvsMIBComplianceV03 1.3.6.1.4.1.9.9.388.2.1.3
The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
MODULE-COMPLIANCE    

cvsMIBComplianceV04 1.3.6.1.4.1.9.9.388.2.1.4
The compliance statement for entities which implement the CISCO-VIRTUAL-SWITCH-MIB.
MODULE-COMPLIANCE    

cvsGlobalGroup 1.3.6.1.4.1.9.9.388.2.2.1
The collection of objects which are used in the virtual switch or standalone environment.
OBJECT-GROUP    

cvsCoreSwitchGroup 1.3.6.1.4.1.9.9.388.2.2.2
The collection of objects which are used to configure the selection information of the active or standby core switches in the virtual switch environment.
OBJECT-GROUP    

cvsChassisGroup 1.3.6.1.4.1.9.9.388.2.2.3
The collection of objects which are used to monitor the chassis information in virtual switch architecture.
OBJECT-GROUP    

cvsVSLConnectionGroup 1.3.6.1.4.1.9.9.388.2.2.4
The collection of objects which are used to configure the VSL connection information in standalone or virtual switch environment.
OBJECT-GROUP    

cvsVSLStatisticsGroup 1.3.6.1.4.1.9.9.388.2.2.5
The collection of objects which are used to monitor the VSL statistics information in virtual switch architecture.
OBJECT-GROUP    

cvsModuleGroup 1.3.6.1.4.1.9.9.388.2.2.6
The collection of objects which are used to monitor the physical module information.
OBJECT-GROUP    

cvsConnectionNotifsGroup 1.3.6.1.4.1.9.9.388.2.2.7
The collection of notifications for the connections in virtual switch environment.
NOTIFICATION-GROUP    

cvsVSLStatisticsExtGroup 1.3.6.1.4.1.9.9.388.2.2.8
The collection of objects which are used to monitor the more detail VSL statistics information in virtual switch architecture.
OBJECT-GROUP    

cvsVssModuleStandbyGroup 1.3.6.1.4.1.9.9.388.2.2.9
The collection of objects which are used to monitor the module in-chassis standby status information.
OBJECT-GROUP    

cvsCoreSwitchLocationGroup 1.3.6.1.4.1.9.9.388.2.2.10
The collection of objects which are used to configure the location information of the core switches in the virtual switch environment.
OBJECT-GROUP    

cvsDualActiveDetectionNotifsControlGroup 1.3.6.1.4.1.9.9.388.2.2.11
The collection of object(s) which are used to control the notification of dual active detection in the virtual switch environment.
OBJECT-GROUP    

cvsDualActiveDetectionNotifsInfoGroup 1.3.6.1.4.1.9.9.388.2.2.12
The collection of object(s) providing variable binding for the dual active detection notification in the virtual switch environment.
OBJECT-GROUP    

cvsDualActiveDetectionNotifsGroup 1.3.6.1.4.1.9.9.388.2.2.13
The collection of notification(s) for the dual active detection in the virtual switch environment.
NOTIFICATION-GROUP    

cvsVSLLinkPortGroup 1.3.6.1.4.1.9.9.388.2.2.14
The collection of object(s) which are used to get the VSL Interface Name.
OBJECT-GROUP