CISCO-SVI-AUTOSTATE-MIB
File:
CISCO-SVI-AUTOSTATE-MIB.mib (7281 bytes)
Imported modules
Imported symbols
Defined Types
| CsaIfConfigEntry |
|
| SEQUENCE |
|
|
|
| |
csaInterfaceMode |
INTEGER |
|
Defined Values
| ciscoSVIAutostateMIB |
1.3.6.1.4.1.9.9.376 |
| The MIB module is for configuration of the switch virtual
interface (SVI) autostate feature. Autostate feature
is a mechanism to calculate the state of a SVI dynamically
when some condition occurs such as a failure of
a participating interface in that SVI. |
| MODULE-IDENTITY |
|
|
|
| csaGlobal |
1.3.6.1.4.1.9.9.376.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| csaFeatureEnable |
1.3.6.1.4.1.9.9.376.1.1.1 |
| This object indicates whether the autostate feature is
enabled. If it is set to 'false', the feature is disabled
in the device and the value of csaInterfaceMode does not
take effect. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| csaTrackedVlansLow |
1.3.6.1.4.1.9.9.376.1.1.2 |
| A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 0 to 2047. The first
octet corresponds to VLANs with VlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc. The most significant bit of each octet
corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if it is tracked by the SVI autostate
feature then the bit corresponding to that VLAN is set
to '1'. A tracked VLAN, whose all interfaces having their
cdsInterfaceMode object value of 'track' and not in
forwarding state, will go down. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..256) |
|
| csaTrackedVlansHigh |
1.3.6.1.4.1.9.9.376.1.1.3 |
| A string of octets containing one bit per VLAN for
VLANs with VlanIndex value of 2048 to 4095. The first
octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2063; etc. The most significant bit of each
octet corresponds to the lowest value VlanIndex in that
octet.
For each VLAN, if it is tracked by the SVI autostate
feature then the bit corresponding to that VLAN is set
to '1'. A tracked VLAN, whose all interfaces having their
cdsInterfaceMode object value of 'track' and not in
forwarding state, will go down. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
Size(0..256) |
|
| csaIfConfigTable |
1.3.6.1.4.1.9.9.376.1.2.1 |
| This table contains information and configuration
of interface mode regarding the SVI autostate
feature. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CsaIfConfigEntry |
|
| csaIfConfigEntry |
1.3.6.1.4.1.9.9.376.1.2.1.1 |
| There will be an entry for each interface that supports
SVI autostate feature. A row instance contains the
configured mode at each interface for Autostate purpose. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CsaIfConfigEntry |
|
|
| csaInterfaceMode |
1.3.6.1.4.1.9.9.376.1.2.1.1.1 |
| This object indicates the interface mode regarding
SVI autostate feature. This object only takes effect if
the value of csaFeatureEnable object is 'true'.
'normal' indicates that when SVI autostate feature is
enabled, this interface will participate normally
in the autostate calculation of the SVI which it
associates.
'exclude' indicates that when SVI autostate feature is
enabled, this interface will be excluded from the autostate
calculation of the SVI which it associates.
'track' indicates that when SVI autostate feature is
enabled, this interface will be tracked in the autostate
calculation of the tracked SVI which it associates. If all
tracked interfaces of this SVI go down, the corresponding
SVI goes down. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
normal(1), exclude(2), track(3) |
|
| csaMIBCompliance |
1.3.6.1.4.1.9.9.376.2.1.1 |
| The compliance statement for the CISCO-SVI-AUTOSTATE-MIB |
| Status: current |
Access: read-write |
| MODULE-COMPLIANCE |
|
|
|
| ciscoSVIAutostateGroup |
1.3.6.1.4.1.9.9.376.2.2.1 |
| A collection of objects which are used to configure as
well as show information regarding the SVI autostate
feature. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|
| ciscoSVITrackedVlanGroup |
1.3.6.1.4.1.9.9.376.2.2.2 |
| A collection of objects which are used to configure as
well as show information regarding VLANs tracked by the
SVI autostate feature. |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|