CISCO-QLLC01-MIB
File:
CISCO-QLLC01-MIB.mib (23984 bytes)
Imported modules
Imported symbols
Defined Types
QllcLSAdminEntry |
|
SEQUENCE |
|
|
|
|
qllcLSAdminIfIndex |
IfIndexType |
|
|
qllcLSAdminLciVcIndex |
IfIndexType |
|
|
qllcLSAdminCircuitType |
INTEGER |
|
|
qllcLSAdminRole |
INTEGER |
|
|
qllcLSAdminX25Add |
X121Address |
|
|
qllcLSAdminModulo |
INTEGER |
|
|
qllcLSAdminLgX25 |
Integer32 |
|
QllcLSOperEntry |
|
SEQUENCE |
|
|
|
|
qllcLSOperIfIndex |
IfIndexType |
|
|
qllcLSOperLciVcIndex |
IfIndexType |
|
|
qllcLSOperCircuitType |
INTEGER |
|
|
qllcLSOperRole |
INTEGER |
|
|
qllcLSOperX25Add |
X121Address |
|
|
qllcLSOperModulo |
INTEGER |
|
|
qllcLSOperState |
INTEGER |
|
|
qllcLSOperLgX25 |
Integer32 |
|
QllcLSStatsEntry |
|
SEQUENCE |
|
|
|
|
qllcLSStatsIfIndex |
IfIndexType |
|
|
qllcLSStatsLciVcIndex |
IfIndexType |
|
|
qllcLSStatsXidIn |
Counter32 |
|
|
qllcLSStatsXidOut |
Counter32 |
|
|
qllcLSStatsTestIn |
Counter32 |
|
|
qllcLSStatsTestOut |
Counter32 |
|
|
qllcLSStatsQuenchOff |
Counter32 |
|
|
qllcLSStatsQuenchOn |
Counter32 |
|
|
qllcLSStatsInPaks |
Counter32 |
|
|
qllcLSStatsOutPaks |
Counter32 |
|
|
qllcLSStatsInBytes |
Counter32 |
|
|
qllcLSStatsOutBytes |
Counter32 |
|
|
qllcLSStatsNumRcvQsms |
Counter32 |
|
|
qllcLSStatsNumSndQsms |
Counter32 |
|
|
qllcLSStatsNumRcvDiscs |
Counter32 |
|
|
qllcLSStatsNumSndDiscs |
Counter32 |
|
|
qllcLSStatsNumRcvDms |
Counter32 |
|
|
qllcLSStatsNumSndDms |
Counter32 |
|
|
qllcLSStatsNumRcvFrmrs |
Counter32 |
|
|
qllcLSStatsNumSndFrmrs |
Counter32 |
|
|
qllcLSStatsNumDrops |
Counter32 |
|
|
qllcLSStatsNumErrs |
Counter32 |
|
Defined Values
snaqllc01 |
1.3.6.1.4.1.9.10.6 |
This is the MIB module for objects used to
manage the QLLC protocol.
|
MODULE-IDENTITY |
|
|
|
qllc |
1.3.6.1.4.1.9.10.6.1 |
OBJECT IDENTIFIER |
|
|
|
qllcLSAdminTable |
1.3.6.1.4.1.9.10.6.1.1 |
This table contains objects that can be changed
for each qllc entry. Changing one of these parameters
will take effect in the operating LS immediately.
Each qllc connection will have an entry in this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
QllcLSAdminEntry |
|
qllcLSAdminEntry |
1.3.6.1.4.1.9.10.6.1.1.1 |
Configured parameter values for a specific qllc. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
QllcLSAdminEntry |
|
|
qllcLSAdminIfIndex |
1.3.6.1.4.1.9.10.6.1.1.1.1 |
Interface Index value for the qllc connection. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSAdminLciVcIndex |
1.3.6.1.4.1.9.10.6.1.1.1.2 |
The virtual circuit number for the logical
channel identifier or PVC number depending on the
type of circuit on this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSAdminCircuitType |
1.3.6.1.4.1.9.10.6.1.1.1.3 |
The circuit type on this interface. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
switchedVC(1), permanentVC(2) |
|
qllcLSAdminRole |
1.3.6.1.4.1.9.10.6.1.1.1.4 |
The role that the QLLC link station shall assume. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary(1), secondary(2), peerToPeer(3) |
|
qllcLSAdminX25Add |
1.3.6.1.4.1.9.10.6.1.1.1.5 |
The X.25 address associated with the qllc
connection. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
X121Address |
|
|
qllcLSAdminModulo |
1.3.6.1.4.1.9.10.6.1.1.1.6 |
The modulus for QLLC link station.
It determines the size of the rotating
ACK window and can take values of 8 and 128. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
modulo8(1), modulo128(2) |
|
qllcLSAdminLgX25 |
1.3.6.1.4.1.9.10.6.1.1.1.7 |
The largest QLLC packet allowed to go out
on the QLLC/X.25 side. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
qllcLSOperTable |
1.3.6.1.4.1.9.10.6.1.2 |
This table contains an entry for each qllc
connection. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
QllcLSOperEntry |
|
qllcLSOperEntry |
1.3.6.1.4.1.9.10.6.1.2.1 |
Parameter values for a specific qllc connection. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
QllcLSOperEntry |
|
|
qllcLSOperIfIndex |
1.3.6.1.4.1.9.10.6.1.2.1.1 |
Interface Index value for the qllc connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSOperLciVcIndex |
1.3.6.1.4.1.9.10.6.1.2.1.2 |
The virtual circuit number for the logical
channel identifier on this interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSOperCircuitType |
1.3.6.1.4.1.9.10.6.1.2.1.3 |
The circuit type on this interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
switchedVC(1), permanentVC(2) |
|
qllcLSOperRole |
1.3.6.1.4.1.9.10.6.1.2.1.4 |
The role the QLLC link station. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
primary(1), secondary(2), peerToPeer(3) |
|
qllcLSOperX25Add |
1.3.6.1.4.1.9.10.6.1.2.1.5 |
The remote X.25 address associated with the
qllc connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
X121Address |
|
|
qllcLSOperModulo |
1.3.6.1.4.1.9.10.6.1.2.1.6 |
The modulus for QLLC link station. It determines
the size of the rotating ACK window and can take
values of 8 and 128. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
modulo8(1), modulo128(2) |
|
qllcLSOperState |
1.3.6.1.4.1.9.10.6.1.2.1.7 |
The state of a particular QLLC connection.
Inop, closed, opening, closing,
recovery and opened are states defined in the IBM
document SC30-3409-1 The X.25 1984/1988 DTE/DCE
and DTE/DTE Interface Architecture Reference. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
lsStateInop(1), lsStateClosed(2), lsStateOpening(3), lsStateClosing(4), lsStateRecovery(5), lsStateOpened(6) |
|
qllcLSOperLgX25 |
1.3.6.1.4.1.9.10.6.1.2.1.8 |
The largest QLLC packet allowed to go out on
the QLLC/X.25 side. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
qllcLSStatsTable |
1.3.6.1.4.1.9.10.6.1.3 |
This table defines link station statistics kept
for each qllc connection. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
QllcLSStatsEntry |
|
qllcLSStatsEntry |
1.3.6.1.4.1.9.10.6.1.3.1 |
Link station statistics. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
QllcLSStatsEntry |
|
|
qllcLSStatsIfIndex |
1.3.6.1.4.1.9.10.6.1.3.1.1 |
Interface Index value for the qllc connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSStatsLciVcIndex |
1.3.6.1.4.1.9.10.6.1.3.1.2 |
The virtual circuit number for the logical
channel identifier on this interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IfIndexType |
|
|
qllcLSStatsXidIn |
1.3.6.1.4.1.9.10.6.1.3.1.3 |
The number of XIDs received from the LS on
this VC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsXidOut |
1.3.6.1.4.1.9.10.6.1.3.1.4 |
The number of XIDs sent to the LS on this VC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsTestIn |
1.3.6.1.4.1.9.10.6.1.3.1.5 |
The number of TEST packets received from the LS
on this VC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsTestOut |
1.3.6.1.4.1.9.10.6.1.3.1.6 |
The number of TEST packets sent to the LS from
this VC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsQuenchOff |
1.3.6.1.4.1.9.10.6.1.3.1.7 |
The number of times the connection Quenched off
for this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsQuenchOn |
1.3.6.1.4.1.9.10.6.1.3.1.8 |
The number of times the connection Quenched on for
this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsInPaks |
1.3.6.1.4.1.9.10.6.1.3.1.9 |
The total number of information packets received on
this interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsOutPaks |
1.3.6.1.4.1.9.10.6.1.3.1.10 |
The total number of information packets sent
on this interfaces. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsInBytes |
1.3.6.1.4.1.9.10.6.1.3.1.11 |
The total number of bytes in the information
packets received on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsOutBytes |
1.3.6.1.4.1.9.10.6.1.3.1.12 |
The total number of bytes in the information
packets sent on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumRcvQsms |
1.3.6.1.4.1.9.10.6.1.3.1.13 |
The number of QSMs received on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumRcvDiscs |
1.3.6.1.4.1.9.10.6.1.3.1.15 |
The number of DISCs received on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumRcvDms |
1.3.6.1.4.1.9.10.6.1.3.1.17 |
The number of DMs received on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumSndDms |
1.3.6.1.4.1.9.10.6.1.3.1.18 |
The number of DMs sent on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumRcvFrmrs |
1.3.6.1.4.1.9.10.6.1.3.1.19 |
The number of FRMRs received on this connection. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumDrops |
1.3.6.1.4.1.9.10.6.1.3.1.21 |
The number of packets dropped due to buffer
allocation or other internal problems. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcLSStatsNumErrs |
1.3.6.1.4.1.9.10.6.1.3.1.22 |
The number of HDLC protocol errors detected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
qllcMibCompliance |
1.3.6.1.4.1.9.10.6.2.1.1 |
The compliance statement for QLLC nodes. |
Status: current |
Access: read-only |
MODULE-COMPLIANCE |
|
|
|
qllcLSAdminGroup |
1.3.6.1.4.1.9.10.6.2.2.1 |
A collection of objects providing configuration capability. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
qllcLSOperGroup |
1.3.6.1.4.1.9.10.6.2.2.2 |
A collection of objects providing operational control
capability. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
qllcLSStatsGroup |
1.3.6.1.4.1.9.10.6.2.2.3 |
A collection of objects providing statistics. |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|