CISCO-OSPF-MIB

File: CISCO-OSPF-MIB.mib (52932 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB OSPF-MIB INET-ADDRESS-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Gauge32 Integer32 Unsigned32
IpAddress TruthValue MODULE-COMPLIANCE
OBJECT-GROUP InterfaceIndexOrZero ospfAreaEntry
ospfIfEntry ospfVirtIfEntry ospfLsdbAreaId
ospfLsdbLsid ospfLsdbRouterId AreaID
RouterID PositiveInteger HelloRange
UpToMaxAge Metric InetAddress
InetAddressType ciscoExperiment

Defined Types

CospfAreaEntry  
SEQUENCE    
  cospfOpaqueAreaLsaCount Gauge32
  cospfOpaqueAreaLsaCksumSum Unsigned32
  cospfAreaNssaTranslatorRole INTEGER
  cospfAreaNssaTranslatorState INTEGER
  cospfAreaNssaTranslatorEvents Counter32

CospfLsdbEntry  
SEQUENCE    
  cospfLsdbType INTEGER
  cospfLsdbSequence Integer32
  cospfLsdbAge Integer32
  cospfLsdbChecksum Integer32
  cospfLsdbAdvertisement OCTET STRING

CospfIfEntry  
SEQUENCE    
  cospfIfLsaCount Gauge32
  cospfIfLsaCksumSum Unsigned32

CospfVirtIfEntry  
SEQUENCE    
  cospfVirtIfLsaCount Gauge32
  cospfVirtIfLsaCksumSum Unsigned32

CospfShamLinkEntry  
SEQUENCE    
  cospfShamLinkAreaId AreaID
  cospfShamLinkLocalIpAddress IpAddress
  cospfShamLinkNeighborId RouterID
  cospfShamLinkRetransInterval UpToMaxAge
  cospfShamLinkHelloInterval HelloRange
  cospfShamLinkRtrDeadInterval PositiveInteger
  cospfShamLinkState INTEGER
  cospfShamLinkEvents Counter32
  cospfShamLinkMetric Metric

CospfShamLinksEntry  
SEQUENCE    
  cospfShamLinksAreaId AreaID
  cospfShamLinksLocalIpAddrType InetAddressType
  cospfShamLinksLocalIpAddr InetAddress
  cospfShamLinksRemoteIpAddrType InetAddressType
  cospfShamLinksRemoteIpAddr InetAddress
  cospfShamLinksRetransInterval UpToMaxAge
  cospfShamLinksHelloInterval HelloRange
  cospfShamLinksRtrDeadInterval PositiveInteger
  cospfShamLinksState INTEGER
  cospfShamLinksEvents Counter32
  cospfShamLinksMetric Metric

CospfShamLinkNbrEntry  
SEQUENCE    
  cospfShamLinkNbrArea AreaID
  cospfShamLinkNbrIpAddrType InetAddressType
  cospfShamLinkNbrIpAddr InetAddress
  cospfShamLinkNbrRtrId RouterID
  cospfShamLinkNbrOptions Integer32
  cospfShamLinkNbrState INTEGER
  cospfShamLinkNbrEvents Counter32
  cospfShamLinkNbrLsRetransQLen Gauge32
  cospfShamLinkNbrHelloSuppressed TruthValue

CospfLocalLsdbEntry  
SEQUENCE    
  cospfLocalLsdbIpAddress IpAddress
  cospfLocalLsdbAddressLessIf InterfaceIndexOrZero
  cospfLocalLsdbType INTEGER
  cospfLocalLsdbLsid IpAddress
  cospfLocalLsdbRouterId RouterID
  cospfLocalLsdbSequence Integer32
  cospfLocalLsdbAge Integer32
  cospfLocalLsdbChecksum Unsigned32
  cospfLocalLsdbAdvertisement OCTET STRING

CospfVirtLocalLsdbEntry  
SEQUENCE    
  cospfVirtLocalLsdbTransitArea AreaID
  cospfVirtLocalLsdbNeighbor RouterID
  cospfVirtLocalLsdbType INTEGER
  cospfVirtLocalLsdbLsid IpAddress
  cospfVirtLocalLsdbRouterId RouterID
  cospfVirtLocalLsdbSequence Integer32
  cospfVirtLocalLsdbAge Integer32
  cospfVirtLocalLsdbChecksum Unsigned32
  cospfVirtLocalLsdbAdvertisement OCTET STRING

Defined Values

cospf 1.3.6.1.4.1.9.10.99
An extension to the MIB module defined in RFC 1850 for managing OSPF implimentation. Most of the MIB definitions are based on the IETF draft < draft-ietf-ospf-mib-update-05.txt > . Support for OSPF Sham link is also added
MODULE-IDENTITY    

cospfGeneralGroup 1.3.6.1.4.1.9.10.99.1
OBJECT IDENTIFIER    

cospfRFC1583Compatibility 1.3.6.1.4.1.9.10.99.1.1
Indicates metrics used to choose among multiple AS- external-LSAs. When cospfRFC1583Compatibility is set to enabled, only cost will be used when choosing among multiple AS-external-LSAs advertising the same destination. When cospfRFC1583Compatibility is set to disabled, preference will be driven first by type of path using cost only to break ties.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cospfOpaqueLsaSupport 1.3.6.1.4.1.9.10.99.1.2
The router's support for Opaque LSA types.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cospfTrafficEngineeringSupport 1.3.6.1.4.1.9.10.99.1.3
The router's support for OSPF traffic engineering.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cospfOpaqueASLsaCount 1.3.6.1.4.1.9.10.99.1.4
The total number of Opaque AS link-state advertisements in the link state database.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cospfOpaqueASLsaCksumSum 1.3.6.1.4.1.9.10.99.1.5
The 32-bit unsigned sum of the Opaque AS link-state advertisements' LS checksums contained link state database.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfAreaTable 1.3.6.1.4.1.9.10.99.2
Information describing the configured parameters and cumulative statistics of the router's attached areas.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfAreaEntry

cospfAreaEntry 1.3.6.1.4.1.9.10.99.2.1
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfAreaEntry  

cospfOpaqueAreaLsaCount 1.3.6.1.4.1.9.10.99.2.1.1
The total number of Opaque Area and AS link-state advertisements in the link state database of this area.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cospfOpaqueAreaLsaCksumSum 1.3.6.1.4.1.9.10.99.2.1.2
The 32-bit unsigned sum of the Opaque Area and AS link-state advertisements' LS checksums contained link state database of this area. The sum can be used to determine if there has been a change in the link state database for Opaque Area and AS link-state advertisements
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfAreaNssaTranslatorRole 1.3.6.1.4.1.9.10.99.2.1.3
Indicates an NSSA Border router's ability to perform NSSA translation of type-7 LSAs into type-5 LSAs.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER always(1), candidate(2)  

cospfAreaNssaTranslatorState 1.3.6.1.4.1.9.10.99.2.1.4
Indicates if and how an NSSA Border router is performing NSSA translation of type-7 LSAs into type-5 LSAs. When this object set to enabled, the NSSA Border router's cospfAreaNssaExtTranslatorRole has been set to always. When this object is set to elected, a candidate NSSA Border router is Translating type-7 LSAs into type-5. When this object is set to disabled, a candidate NSSA Border router is NOT translating type-7 LSAs into type-5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), elected(2), disabled(3)  

cospfAreaNssaTranslatorEvents 1.3.6.1.4.1.9.10.99.2.1.5
Indicates the number of Translator State changes that have occurred since the last boot-up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cospfLsdbTable 1.3.6.1.4.1.9.10.99.3
The OSPF Process's Link State Database. This table is meant for Opaque LSA's
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfLsdbEntry

cospfLsdbEntry 1.3.6.1.4.1.9.10.99.3.1
A single Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfLsdbEntry  

cospfLsdbType 1.3.6.1.4.1.9.10.99.3.1.1
The type of the link state advertisement. Each link state type has a separate advertisement format.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER areaOpaqueLink(10), asOpaqueLink(11)  

cospfLsdbSequence 1.3.6.1.4.1.9.10.99.3.1.2
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..147483647  

cospfLsdbAge 1.3.6.1.4.1.9.10.99.3.1.3
This field is the age of the link state advertisement in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

cospfLsdbChecksum 1.3.6.1.4.1.9.10.99.3.1.4
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

cospfLsdbAdvertisement 1.3.6.1.4.1.9.10.99.3.1.5
The entire Link State Advertisement, including its header.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..65535)  

cospfIfTable 1.3.6.1.4.1.9.10.99.4
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfIfEntry

cospfIfEntry 1.3.6.1.4.1.9.10.99.4.1
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfIfEntry  

cospfIfLsaCount 1.3.6.1.4.1.9.10.99.4.1.1
The total number of link-local link state advertisements in this interface's link-local link state database.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cospfIfLsaCksumSum 1.3.6.1.4.1.9.10.99.4.1.2
The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database, and to compare the interface link-state database of routers attached to the same subnet.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfVirtIfTable 1.3.6.1.4.1.9.10.99.5
Information about this router's virtual inter- faces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfVirtIfEntry

cospfVirtIfEntry 1.3.6.1.4.1.9.10.99.5.1
Information about a single Virtual Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfVirtIfEntry  

cospfVirtIfLsaCount 1.3.6.1.4.1.9.10.99.5.1.1
The total number of link-local link state advertisements in this virtual interface's link-local link state database.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cospfVirtIfLsaCksumSum 1.3.6.1.4.1.9.10.99.5.1.2
The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this virtual interface's link-local link state database. The sum can be used to determine if there has been a change in the virtual interface's link state database, and to compare the virtual interface link-state database of the virtual neighbors.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfShamLinkTable 1.3.6.1.4.1.9.10.99.6
Information about this router's sham links
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfShamLinkEntry

cospfShamLinkEntry 1.3.6.1.4.1.9.10.99.6.1
Information about a single sham link
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  CospfShamLinkEntry  

cospfShamLinkAreaId 1.3.6.1.4.1.9.10.99.6.1.1
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  AreaID  

cospfShamLinkLocalIpAddress 1.3.6.1.4.1.9.10.99.6.1.2
The Local IP address of the sham link.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  IpAddress  

cospfShamLinkNeighborId 1.3.6.1.4.1.9.10.99.6.1.3
The Router ID of the other end router of the sham link.
Status: deprecated Access: not-accessible
OBJECT-TYPE    
  RouterID  

cospfShamLinkRetransInterval 1.3.6.1.4.1.9.10.99.6.1.4
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this link. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round trip time.
Status: deprecated Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

cospfShamLinkHelloInterval 1.3.6.1.4.1.9.10.99.6.1.5
The length of time, in seconds, between the Hello packets that the router sends on the sham link.
Status: deprecated Access: read-only
OBJECT-TYPE    
  HelloRange  

cospfShamLinkRtrDeadInterval 1.3.6.1.4.1.9.10.99.6.1.6
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval.
Status: deprecated Access: read-only
OBJECT-TYPE    
  PositiveInteger  

cospfShamLinkState 1.3.6.1.4.1.9.10.99.6.1.7
OSPF sham link states.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

cospfShamLinkEvents 1.3.6.1.4.1.9.10.99.6.1.8
The number of state changes or error events on this sham link
Status: deprecated Access: read-only
OBJECT-TYPE    
  Counter32  

cospfShamLinkMetric 1.3.6.1.4.1.9.10.99.6.1.9
The Metric to be advertised.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Metric  

cospfShamLinksTable 1.3.6.1.4.1.9.10.99.11
Information about this router's sham links.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfShamLinksEntry

cospfShamLinksEntry 1.3.6.1.4.1.9.10.99.11.1
Information about a single sham link.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfShamLinksEntry  

cospfShamLinksAreaId 1.3.6.1.4.1.9.10.99.11.1.1
The area that this sham link is part of.
Status: current Access: not-accessible
OBJECT-TYPE    
  AreaID  

cospfShamLinksLocalIpAddrType 1.3.6.1.4.1.9.10.99.11.1.2
The type of internet address of this sham link's local IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

cospfShamLinksLocalIpAddr 1.3.6.1.4.1.9.10.99.11.1.3
The Local IP address of the sham link.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

cospfShamLinksRemoteIpAddrType 1.3.6.1.4.1.9.10.99.11.1.4
The type of internet address of this sham link's remote IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

cospfShamLinksRemoteIpAddr 1.3.6.1.4.1.9.10.99.11.1.5
The IP address of the other end router of the sham link.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

cospfShamLinksRetransInterval 1.3.6.1.4.1.9.10.99.11.1.6
The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this link. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round trip time.
Status: current Access: read-only
OBJECT-TYPE    
  UpToMaxAge  

cospfShamLinksHelloInterval 1.3.6.1.4.1.9.10.99.11.1.7
The length of time, in seconds, between the Hello packets that the router sends on the sham link.
Status: current Access: read-only
OBJECT-TYPE    
  HelloRange  

cospfShamLinksRtrDeadInterval 1.3.6.1.4.1.9.10.99.11.1.8
The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval.
Status: current Access: read-only
OBJECT-TYPE    
  PositiveInteger  

cospfShamLinksState 1.3.6.1.4.1.9.10.99.11.1.9
OSPF sham link states.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), pointToPoint(4)  

cospfShamLinksEvents 1.3.6.1.4.1.9.10.99.11.1.10
The number of state changes or error events on this sham link
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cospfShamLinksMetric 1.3.6.1.4.1.9.10.99.11.1.11
The Metric to be advertised.
Status: current Access: read-only
OBJECT-TYPE    
  Metric  

cospfShamLinkNbrTable 1.3.6.1.4.1.9.10.99.10
A table of sham link neighbor information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfShamLinkNbrEntry

cospfShamLinkNbrEntry 1.3.6.1.4.1.9.10.99.10.1
Sham link neighbor information.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfShamLinkNbrEntry  

cospfShamLinkNbrArea 1.3.6.1.4.1.9.10.99.10.1.1
The area to which the sham link is part of.
Status: current Access: not-accessible
OBJECT-TYPE    
  AreaID  

cospfShamLinkNbrIpAddrType 1.3.6.1.4.1.9.10.99.10.1.2
The type of internet address of this sham link neighbor's IP address.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddressType  

cospfShamLinkNbrIpAddr 1.3.6.1.4.1.9.10.99.10.1.3
The IP address this sham link neighbor is using.
Status: current Access: not-accessible
OBJECT-TYPE    
  InetAddress  

cospfShamLinkNbrRtrId 1.3.6.1.4.1.9.10.99.10.1.4
A 32-bit integer uniquely identifying the neighboring router.
Status: current Access: read-only
OBJECT-TYPE    
  RouterID  

cospfShamLinkNbrOptions 1.3.6.1.4.1.9.10.99.10.1.5
A Bit Mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it implements OSPF Multicast Routing.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

cospfShamLinkNbrState 1.3.6.1.4.1.9.10.99.10.1.6
The state of this sham link neighbor relation- ship.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(1), attempt(2), init(3), twoWay(4), exchangeStart(5), exchange(6), loading(7), full(8)  

cospfShamLinkNbrEvents 1.3.6.1.4.1.9.10.99.10.1.7
The number of times this sham link has changed state or an error has occurred.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cospfShamLinkNbrLsRetransQLen 1.3.6.1.4.1.9.10.99.10.1.8
The current length of the retransmission queue. The retransmission queue is maintained for LSAs that have been flooded but not acknowledged on this adjacency.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

cospfShamLinkNbrHelloSuppressed 1.3.6.1.4.1.9.10.99.10.1.9
Indicates whether Hellos are being suppressed to the neighbor.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cospfLocalLsdbTable 1.3.6.1.4.1.9.10.99.7
The OSPF Process's Link-Local Link State Database for non-virtual links.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfLocalLsdbEntry

cospfLocalLsdbEntry 1.3.6.1.4.1.9.10.99.7.1
A single Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfLocalLsdbEntry  

cospfLocalLsdbIpAddress 1.3.6.1.4.1.9.10.99.7.1.1
The IP Address of the interface from which the LSA was received if the interface is numbered.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

cospfLocalLsdbAddressLessIf 1.3.6.1.4.1.9.10.99.7.1.2
The Interface Index of the interface from which the LSA was received if the interface is unnumbered.
Status: current Access: not-accessible
OBJECT-TYPE    
  InterfaceIndexOrZero  

cospfLocalLsdbType 1.3.6.1.4.1.9.10.99.7.1.3
The type of the link state advertisement. Each link state type has a separate advertisement format.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER localOpaqueLink(9)  

cospfLocalLsdbLsid 1.3.6.1.4.1.9.10.99.7.1.4
The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

cospfLocalLsdbRouterId 1.3.6.1.4.1.9.10.99.7.1.5
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current Access: not-accessible
OBJECT-TYPE    
  RouterID  

cospfLocalLsdbSequence 1.3.6.1.4.1.9.10.99.7.1.6
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

cospfLocalLsdbAge 1.3.6.1.4.1.9.10.99.7.1.7
This field is the age of the link state advertisement in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3600  

cospfLocalLsdbChecksum 1.3.6.1.4.1.9.10.99.7.1.8
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfLocalLsdbAdvertisement 1.3.6.1.4.1.9.10.99.7.1.9
The entire Link State Advertisement, including its header.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..65535)  

cospfVirtLocalLsdbTable 1.3.6.1.4.1.9.10.99.8
The OSPF Process's Link-Local Link State Database for virtual links.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CospfVirtLocalLsdbEntry

cospfVirtLocalLsdbEntry 1.3.6.1.4.1.9.10.99.8.1
A single Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  CospfVirtLocalLsdbEntry  

cospfVirtLocalLsdbTransitArea 1.3.6.1.4.1.9.10.99.8.1.1
The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0
Status: current Access: not-accessible
OBJECT-TYPE    
  AreaID  

cospfVirtLocalLsdbNeighbor 1.3.6.1.4.1.9.10.99.8.1.2
The Router ID of the Virtual Neighbor.
Status: current Access: not-accessible
OBJECT-TYPE    
  RouterID  

cospfVirtLocalLsdbType 1.3.6.1.4.1.9.10.99.8.1.3
The type of the link state advertisement. Each link state type has a separate advertisement format.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER localOpaqueLink(9)  

cospfVirtLocalLsdbLsid 1.3.6.1.4.1.9.10.99.8.1.4
The Link State ID is an LS Type Specific field containing a 32 bit identifier in IP address format; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

cospfVirtLocalLsdbRouterId 1.3.6.1.4.1.9.10.99.8.1.5
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current Access: not-accessible
OBJECT-TYPE    
  RouterID  

cospfVirtLocalLsdbSequence 1.3.6.1.4.1.9.10.99.8.1.6
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -2147483647..2147483647  

cospfVirtLocalLsdbAge 1.3.6.1.4.1.9.10.99.8.1.7
This field is the age of the link state advertisement in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..3600  

cospfVirtLocalLsdbChecksum 1.3.6.1.4.1.9.10.99.8.1.8
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..FFFFFFFF  

cospfVirtLocalLsdbAdvertisement 1.3.6.1.4.1.9.10.99.8.1.9
The entire Link State Advertisement, including its header.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..65535)  

cospfConformance 1.3.6.1.4.1.9.10.99.9
OBJECT IDENTIFIER    

cospfGroups 1.3.6.1.4.1.9.10.99.9.1
OBJECT IDENTIFIER    

cospfCompliances 1.3.6.1.4.1.9.10.99.9.2
OBJECT IDENTIFIER    

cospfCompliance 1.3.6.1.4.1.9.10.99.9.2.1
The compliance statements for agents that support the Cisco OSPF MIB. These compliance statements are deprecated by cospfComplianceRev1.
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

cospfComplianceRev1 1.3.6.1.4.1.9.10.99.9.2.2
The compliance statements for agents that support the Cisco OSPF MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

cospfLsdbGroup 1.3.6.1.4.1.9.10.99.9.1.1
These objects are required for OSPF systems that display their link state database.
Status: current Access: read-only
OBJECT-GROUP    

cospfLocalLsdbGroup 1.3.6.1.4.1.9.10.99.9.1.2
These objects are required for OSPF systems that display their Link-Local link state databases for non-virtual links.
Status: current Access: read-only
OBJECT-GROUP    

cospfVirtLocalLsdbGroup 1.3.6.1.4.1.9.10.99.9.1.3
These objects are required for OSPF systems that display their Link-Local link state databases for virtual links.
Status: current Access: read-only
OBJECT-GROUP    

cospfBasicGroup 1.3.6.1.4.1.9.10.99.9.1.4
These objects are required for OSPF systems.
Status: current Access: read-only
OBJECT-GROUP    

cospfAreaGroup 1.3.6.1.4.1.9.10.99.9.1.5
These objects are required for OSPF systems supporting areas. This statement is recommended for use.
Status: current Access: read-only
OBJECT-GROUP    

cospfIfGroup 1.3.6.1.4.1.9.10.99.9.1.6
These objects are required for OSPF systems.
Status: current Access: read-only
OBJECT-GROUP    

cospfVirtIfGroup 1.3.6.1.4.1.9.10.99.9.1.7
These objects are required for OSPF systems.
Status: current Access: read-only
OBJECT-GROUP    

cospfShamLinkGroup 1.3.6.1.4.1.9.10.99.9.1.8
These objects are required for OSPF systems.
Status: deprecated Access: read-only
OBJECT-GROUP    

cospfShamLinkNbrGroup 1.3.6.1.4.1.9.10.99.9.1.9
These objects are required for OSPF systems.
Status: current Access: read-only
OBJECT-GROUP    

cospfShamLinksGroup 1.3.6.1.4.1.9.10.99.9.1.10
These objects are required for OSPF systems.
Status: current Access: read-only
OBJECT-GROUP