CISCO-MRP-MIB

File: CISCO-MRP-MIB.mib (5569 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 MODULE-COMPLIANCE NOTIFICATION-GROUP
OBJECT-GROUP DisplayString ciscoMgmt

Defined Types

CiscoMrpDomainEntry  
SEQUENCE    
  ciscoMrpDomainIndex Unsigned32
  ciscoMrpDomainID OCTET STRING
  ciscoMrpDomainName DisplayString
  ciscoMrpDomainState Unsigned32

Defined Values

ciscoMrpMIB 1.3.6.1.4.1.9.9.850
The CISCO-MRP-MIB is used to monitor the Media Redundancy Protocol (MRP) domains and notifying their state change. MRP is a recovery protocol based on a ring topology, and the redundant interconnection of MRP rings/domains.
MODULE-IDENTITY    

ciscoMrpMIBNotifs 1.3.6.1.4.1.9.9.850.0
OBJECT IDENTIFIER    

ciscoMrpMIBObjects 1.3.6.1.4.1.9.9.850.1
OBJECT IDENTIFIER    

ciscoMrpMIBConform 1.3.6.1.4.1.9.9.850.2
OBJECT IDENTIFIER    

ciscoMrpDomainTable 1.3.6.1.4.1.9.9.850.1.1
Every entry in this table contains information about a Media Redundancy Protocol (MRP) domain.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CiscoMrpDomainEntry

ciscoMrpDomainEntry 1.3.6.1.4.1.9.9.850.1.1.1
An entry in the mrpDomainTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CiscoMrpDomainEntry  

ciscoMrpDomainIndex 1.3.6.1.4.1.9.9.850.1.1.1.1
The index of the entry
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

ciscoMrpDomainID 1.3.6.1.4.1.9.9.850.1.1.1.2
Universally unique identifier belongs to the MRP domain which represents a ring. The IEC 61158-5-10 defines the structure of the UUID as a data type numeric identifier 1025.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(16)  

ciscoMrpDomainName 1.3.6.1.4.1.9.9.850.1.1.1.3
A logical name for the MRP domain to ease the management of MRP domains.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ciscoMrpDomainState 1.3.6.1.4.1.9.9.850.1.1.1.4
Operational status of the MRP entity. undefined(0) Value is not valid. All higher bits are invalid and shall be reset. ringOpen(1) MRP ring redundancy lost. All higher bits are invalid and shall be reset. ringclose(2) MRP ring redundancy achieved. All higher bits are invalid and shall be reset.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2  

ciscoMrpRingOpen 1.3.6.1.4.1.9.9.850.0.1
A ciscoMrpRingOpen trap signifies that a specific MRP ring is open.
Status: current Access: read-only
NOTIFICATION-TYPE    

ciscoMrpMIBCompliances 1.3.6.1.4.1.9.9.850.2.1
OBJECT IDENTIFIER    

ciscoMrpMIBGroups 1.3.6.1.4.1.9.9.850.2.2
OBJECT IDENTIFIER    

ciscoMrpMIBCompliance 1.3.6.1.4.1.9.9.850.2.1.1
Cisco MRP MIB compliance object.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoMrpMIBMainObjectGroup 1.3.6.1.4.1.9.9.850.2.2.1
A collection of objects required for monitoring of MRP domain.
Status: current Access: read-only
OBJECT-GROUP    

ciscoMrpMIBNotificationGroup 1.3.6.1.4.1.9.9.850.2.2.2
A notification which indicates specific ring open.
Status: current Access: read-only
NOTIFICATION-GROUP