CISCO-MPOA-EXT-MIB

File: CISCO-MPOA-EXT-MIB.mib (11230 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF CISCO-SMI
MPOA-MIB SNMPv2-TC IF-MIB
LAN-EMULATION-CLIENT-MIB ATM-FORUM-TC-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP ciscoMgmt mpcIndex
mpsIndex RowStatus InterfaceIndex
VpiInteger VciInteger AtmAddress

Defined Types

CMpcExtShortcutVCCEntry  
SEQUENCE    
  cmpcSCVpi VpiInteger
  cmpcSCVci VciInteger
  cmpcDestAtmAddr AtmAddress

CMpcInterfaceMappingEntry  
SEQUENCE    
  cMpcInterfaceMappingIndex InterfaceIndex
  cMpcInterfaceMappingRowStatus RowStatus

CMpsInterfaceMappingEntry  
SEQUENCE    
  cMpsInterfaceMappingIndex InterfaceIndex
  cMpsInterfaceMappingRowStatus RowStatus

Defined Values

ciscoMpoaExtMIB 1.3.6.1.4.1.9.9.99999
This MIB module is a Cisco extension to the ATM Forum's MPOA MIB. This MIB module consists of object groups to retrieve information about MPOA shortcut VCCs and to bind MPOA entities (MPC & MPS) to physical interfaces.
MODULE-IDENTITY    

ciscoMpoaExtMIBObjects 1.3.6.1.4.1.9.9.99999.1
OBJECT IDENTIFIER    

cMpcExtShortcutVCC 1.3.6.1.4.1.9.9.99999.1.1
OBJECT IDENTIFIER    

cMpcExtShortcutVCCTable 1.3.6.1.4.1.9.9.99999.1.1.1
An extension to the mpcConfig table in the MPOA-MIB. This table identifies the VCI and VPI of each shortcut that is setup by an MPC. A shortcut is a VCC that is setup between the Ingress and Egress MPC.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMpcExtShortcutVCCEntry

cMpcExtShortcutVCCEntry 1.3.6.1.4.1.9.9.99999.1.1.1.1
Entries in the table for the shortcut VCCs setup by an MPC.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMpcExtShortcutVCCEntry  

cmpcSCVpi 1.3.6.1.4.1.9.9.99999.1.1.1.1.1
The VPI of the shortcut VCC setup by the MPC specified by MPC index. The destination of the shortcut VCC is specified by cmpcDestAtmAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  VpiInteger  

cmpcSCVci 1.3.6.1.4.1.9.9.99999.1.1.1.1.2
The VCI of the shortcut VCC setup by the MPC specified by the MPC index. The destination of the shortcut VCC is specified by cmpcDestAtmAddr.
Status: current Access: not-accessible
OBJECT-TYPE    
  VciInteger  

cmpcDestAtmAddr 1.3.6.1.4.1.9.9.99999.1.1.1.1.3
The ATM address of the destination of this shortcut VCC.
Status: current Access: read-only
OBJECT-TYPE    
  AtmAddress  

cMpcInterface 1.3.6.1.4.1.9.9.99999.1.2
OBJECT IDENTIFIER    

cMpcInterfaceMappingTable 1.3.6.1.4.1.9.9.99999.1.2.1
Table that contains information about the MPC <--> interface binding.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMpcInterfaceMappingEntry

cMpcInterfaceMappingEntry 1.3.6.1.4.1.9.9.99999.1.2.1.1
Each row in this table specifies the interface (by ifIndex) to which an MPC (specified by mpcIndex) is bound. Creation of an MPC does not create an entry in this table. After successfully creating an MPC, the MPC has to be bound to an interface in order to create an entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMpcInterfaceMappingEntry  

cMpcInterfaceMappingIndex 1.3.6.1.4.1.9.9.99999.1.2.1.1.1
The Interface (specified by the cMpcInterfaceMappingIndex) to which the MPS (specified by mpcIndex) is bound to. This interface has to be an ATM physical interface.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

cMpcInterfaceMappingRowStatus 1.3.6.1.4.1.9.9.99999.1.2.1.1.2
Row status of the row in the mapping table. Specifying a 'valid' value for the cMpcInterfaceMappingIndex (interface index of an ATM physical interface) in the set operation, along with a value of 4 (createAndGo) for the cMpcInterfaceMappingRowStatus, will bind the MPC specified by mpcIndex to the specified physical interface and create a row entry in this table.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

cMpsInterface 1.3.6.1.4.1.9.9.99999.1.3
OBJECT IDENTIFIER    

cMpsInterfaceMappingTable 1.3.6.1.4.1.9.9.99999.1.3.1
Table that contains information about the MPS <--> interface binding.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMpsInterfaceMappingEntry

cMpsInterfaceMappingEntry 1.3.6.1.4.1.9.9.99999.1.3.1.1
Each row in this table specifies the interface (by ifIndex) to which an MPS (specified by mpsIndex) is bound. Creation of an MPS does not create an entry in this table. After successfully creating an MPS, the MPS has to be bound to an interface in order to create an entry in this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMpsInterfaceMappingEntry  

cMpsInterfaceMappingIndex 1.3.6.1.4.1.9.9.99999.1.3.1.1.1
The Interface (specified by the cMpsInterfaceMappingIndex) to which the MPS (specified by mpsIndex) is bound to. This interface has to be an ATM physical interface.
Status: current Access: read-create
OBJECT-TYPE    
  InterfaceIndex  

cMpsInterfaceMappingRowStatus 1.3.6.1.4.1.9.9.99999.1.3.1.1.2
Row status of the row in the mapping table. Specifying a 'valid' value for the cMpsInterfaceMappingIndex (interface index of an ATM physical interface) in the set operation, along with a value of 4 (createAndGo) for the cMpsInterfaceMappingRowStatus, will bind the MPS specified by mpsIndex to the specified physical interface and create a row entry in this table. Similarly, specifying a value of 6 (destroy) for the cMpsInterfaceMappingRowStatus, along with the mpsIndex of the MPS, will detach the specified MPS from the physical interface(i.e. if it is already attached).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

ciscoMpoaExtMIBNotificationPrefix 1.3.6.1.4.1.9.9.99999.2
OBJECT IDENTIFIER    

ciscoMpoaExtMIBNotifications 1.3.6.1.4.1.9.9.99999.2.0
OBJECT IDENTIFIER    

ciscoMpoaExtMIBConformance 1.3.6.1.4.1.9.9.99999.3
OBJECT IDENTIFIER    

ciscoMpoaExtMIBCompliances 1.3.6.1.4.1.9.9.99999.3.1
OBJECT IDENTIFIER    

ciscoMpoaExtMIBGroups 1.3.6.1.4.1.9.9.99999.3.2
OBJECT IDENTIFIER    

ciscoMpoaExtMIBCompliance 1.3.6.1.4.1.9.9.99999.3.1.1
This module should be implemented by all Cisco devices supporting MPOA Clients.
Status: current Access: read-create
MODULE-COMPLIANCE    

ciscoMpoaExtShorcutVCCMIBGroup 1.3.6.1.4.1.9.9.99999.3.2.1
A collection of objects related to identifying a shorcut VCC setup by an MPC.
Status: current Access: read-create
OBJECT-GROUP    

ciscoMpoaExtMpcInterfaceMappingGroup 1.3.6.1.4.1.9.9.99999.3.2.2
A collection of objects related to identify the interface to which an MPC is bound to.
Status: current Access: read-create
OBJECT-GROUP    

ciscoMpoaExtMpsInterfaceMappingGroup 1.3.6.1.4.1.9.9.99999.3.2.3
A collection of objects related to identify the interface to which an MPS is bound to.
Status: current Access: read-create
OBJECT-GROUP