CISCO-LWAPP-MESH-STATS-MIB

File: CISCO-LWAPP-MESH-STATS-MIB.mib (55828 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
SNMP-FRAMEWORK-MIB	CISCO-LWAPP-AP-MIB	CISCO-LWAPP-MESH-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
Counter32	Gauge32	NOTIFICATION-TYPE
MODULE-COMPLIANCE	OBJECT-GROUP	NOTIFICATION-GROUP
TruthValue	TimeStamp	TimeInterval
SnmpAdminString	cLApSysMacAddress	cLApName
clMeshNeighborMacAddress	clMeshNodeBackhaul	ciscoMgmt

Defined Types

ClMeshNodeStatsEntry
SEQUENCE
	clMeshNodeMalformedNeighPkts	Counter32
	clMeshNodePoorNeighSnrPkts	Counter32
	clMeshNodeExcludedPkts	Counter32
	clMeshNodeRxNeighReq	Counter32
	clMeshNodeRxNeighRsp	Counter32
	clMeshNodeTxNeighReq	Counter32
	clMeshNodeTxNeighRsp	Counter32
	clMeshNodeParentChanges	Counter32
	clMeshNodeSecBackhaulCount	Counter32
	clMeshNodeAssociationCount	Counter32

ClMeshNodePktQueueStatsEntry
SEQUENCE
	clMeshNodePktQueueIndex	INTEGER
	clMeshNodePktQueueAvg	Gauge32
	clMeshNodePktQueuePeak	Gauge32
	clMeshNodePktQueuePktsDropped	Counter32
	clMeshNodePktQueueTimeStamp	TimeStamp
	clMeshNodePktQueueSize	Unsigned32

ClMeshNodeSecStatsEntry
SEQUENCE
	clMeshNodeSecTxPkts	Counter32
	clMeshNodeSecRxPkts	Counter32
	clMeshNodeAssocReqFailures	Counter32
	clMeshNodeAssocReqTimeouts	Counter32
	clMeshNodeAssocReqSuccess	Counter32
	clMeshNodeAuthReqFailures	Counter32
	clMeshNodeAuthReqTimeouts	Counter32
	clMeshNodeAuthReqSuccess	Counter32
	clMeshNodeReassocReqFailures	Counter32
	clMeshNodeReassocReqTimeouts	Counter32
	clMeshNodeReassocReqSuccess	Counter32
	clMeshNodeReauthReqFailures	Counter32
	clMeshNodeReauthReqTimeouts	Counter32
	clMeshNodeReauthReqSuccess	Counter32
	clMeshNodeUnknownAssocReq	Counter32
	clMeshNodeInvalidAssocReq	Counter32
	clMeshNodeUnknownReauthReq	Counter32
	clMeshNodeInvalidReauthReq	Counter32
	clMeshNodeUnknownReassocReq	Counter32
	clMeshNodeInvalidReassocReq	Counter32

ClMeshNeighStatsEntry
SEQUENCE
	clMeshNeighAsParentTxPkts	Counter32
	clMeshNeighAsParentRxPkts	Counter32
	clMeshNeighTotalTxPkts	Counter32
	clMeshNeighSuccessTxPkts	Counter32
	clMeshNeighRetriesTxPkts	Counter32
	clMeshNeighPoorSnrRxPkts	Counter32

ClMeshAccessClassEntry
SEQUENCE
	clMeshAccessClassTotalTxPkts	Counter32
	clMeshAccessClassSuccTxPkts	Counter32
	clMeshAccessClassRetryPkts	Counter32
	clMeshAccessClassRTSAttempts	Counter32
	clMeshAccessClassRTSSuccess	Counter32

ClMeshDataRateStatsEntry
SEQUENCE
	cLMeshDataRateIndex	Unsigned32
	clMeshDataRateSuccTxPkts	Counter32
	clMeshDataRateTxAttempts	Counter32

Defined Values

ciscoLwappMeshStatsMIB		1.3.6.1.4.1.9.9.617
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol (LWAPP) tunnel from Light-weight Access Points. This MIB represents statistics collected for mesh node in Wireless Mesh Network. The deployment of the controller (referred to as CC in the diagram), mesh nodes (RAP and MAP) LWAPP APs, client(MS) and NMS appear as follows. +.......+ +.......+ + + + + + NMS + + NMS + + + + + +.......+ +.......+ . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + RAP + + RAP + + RAP + + RAP + + RAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MAP + + MS + + MAP + + MAP + + MAP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . .. . . . . .. . . . . .. . . . . . . +......+ +......+ +......+ +......+. +......+ + + + + + + + + + + + MAP + + MAP + + MAP + + MAP + + MS + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters to the LWAPP APs. The APs encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity is also referred to as 'controller'. Mobile Station ( MS ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Station and client are used interchangeably. Network Management System ( NMS ) The station from which the administrator manages the wired and wireless networks. Mesh Node A mesh node is defined as a physical or logical entity in the mesh network participating in forming the mesh backhaul. RAP and MAP are two types of mesh nodes supported in mesh network. Root AP (RAP) The AP forming the bridge between a wired and a mesh network with an Ethernet interface to the wired network and a 802.11 radio interface to the mesh network Mesh AP (MAP). The AP extending wireless coverage similar to a repeater in a mesh network and consists of a 802.11 uplink and a 802.11 downlink. On a single-radio backhaul, both uplink and downlink exist on the same radio and are logical links only. On a multi-radio backhaul, they may exist on different radios. Mesh Network Network starting with the wireless backhaul downlink of the RAP and all the entities below except any attached network to the Ethernet link of MAPs. A mesh network below a single RAP is also referred to as a 'Mesh Sector'.A mesh network consists of mesh nodes. A single mesh network is always augmented to a single wired network. Mesh Link A logical 802.11 link between two mesh nodes. A single link is point-to-point. All point-to-multipoint links are considered as multiple mesh links. Often referred to as mesh backhaul link. Mesh Backhaul A Mesh backhaul consists of mesh nodes and mesh links terminating at a RAP. This necessarily creates a one- to-one relationship between a 'mesh network', 'mesh sector' and a 'mesh backhaul' where these terms can be used interchangeably. SNR Signal to Noise ratio on the 802.11 radio. Bridged network The bridged network is defined as the network(s) attached to the Ethernet port of any MAP. There can be multiple such networks attached to a single mesh network. Mesh Node Roaming A mesh node may change its parent mesh node naturally when the RF/network condition changes. Child Mesh node will re-associate and re-authenticate to new parent mesh node. Mesh Security supports two types of mesh node roaming. Intra-controller - LWAPP session is not lost. Inter-controller - LWAPP session is lost. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol
MODULE-IDENTITY

ciscoLwappMeshStatsMIBNotifs		1.3.6.1.4.1.9.9.617.0
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBObjects		1.3.6.1.4.1.9.9.617.1
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBConfigObjects		1.3.6.1.4.1.9.9.617.2
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBConform		1.3.6.1.4.1.9.9.617.3
OBJECT IDENTIFIER

ciscoLwappMeshNodeStats		1.3.6.1.4.1.9.9.617.1.1
OBJECT IDENTIFIER

ciscoLwappMeshNeighStats		1.3.6.1.4.1.9.9.617.1.2
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBNotifObjects		1.3.6.1.4.1.9.9.617.1.3
OBJECT IDENTIFIER

ciscoLwappMeshAccessClass		1.3.6.1.4.1.9.9.617.1.4
OBJECT IDENTIFIER

ciscoLwappMeshDataRateStats		1.3.6.1.4.1.9.9.617.1.5
OBJECT IDENTIFIER

clMeshNodeStatsTable		1.3.6.1.4.1.9.9.617.1.1.1
This table represents statistics information about a mesh node such as the number of that were transmitted to or received from the mesh node, number association attempts, packets transmitted on secondary backhaul etc. An entry in this table gets added when a mesh node associates to the controller and entry gets removed when mesh node disassociates from the controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshNodeStatsEntry

clMeshNodeStatsEntry		1.3.6.1.4.1.9.9.617.1.1.1.1
An (conceptual) entry in this table represents statistics for a mesh node.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshNodeStatsEntry

clMeshNodeMalformedNeighPkts		1.3.6.1.4.1.9.9.617.1.1.1.1.1
This object represents total number of packets received from neighbor mesh nodes which could not be decoded.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodePoorNeighSnrPkts		1.3.6.1.4.1.9.9.617.1.1.1.1.2
This object represents total number of packets received from neighbor mesh nodes which were below SNR threshold value.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeExcludedPkts		1.3.6.1.4.1.9.9.617.1.1.1.1.3
This object represents total number of packets received from excluded neighbor mesh nodes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeRxNeighReq		1.3.6.1.4.1.9.9.617.1.1.1.1.4
This object represents total number of request received from neighbor mesh node APs. Requests can be either broadcast or unicast from neighbor mesh nodes.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeRxNeighRsp		1.3.6.1.4.1.9.9.617.1.1.1.1.5
This object represents total number of response received from neighbor mesh node APs.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeTxNeighReq		1.3.6.1.4.1.9.9.617.1.1.1.1.6
This object represents total number of request sent to neighbor mesh node APs. Requests can be broadcast or unicast to neighbor mesh node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeTxNeighRsp		1.3.6.1.4.1.9.9.617.1.1.1.1.7
This object represents total number of response sent to neighbor mesh node APs.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeParentChanges		1.3.6.1.4.1.9.9.617.1.1.1.1.8
This object represents total number of times this mesh node has changed its parent.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeSecBackhaulCount		1.3.6.1.4.1.9.9.617.1.1.1.1.9
This object specifies the number of packets sent on the secondary backhaul after the change, and is also sent as a part of the 'ciscoLwappMeshSecBackhaulChange' notification.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAssociationCount		1.3.6.1.4.1.9.9.617.1.1.1.1.10
This object specifies the number of association attempts of children nodes at a parent node and is also sent as a part of the ciscoLwappMeshExcessiveAssociation notification
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodePktQueueStatsTable		1.3.6.1.4.1.9.9.617.1.1.2
This table represents information about different packet queues of a mesh node. Queues are maintained in a mesh node based on quality of service and packets wait for its turn in queue before it is sent to network. An (conceptual) entry in this table is created when a mesh node associates with controller and start sending packets to neighbor mesh node or controller Entries are removed when the mesh node disassociates from controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshNodePktQueueStatsEntry

clMeshNodePktQueueStatsEntry		1.3.6.1.4.1.9.9.617.1.1.2.1
Each entry in this table represents average queue size and peak packets queue reached.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshNodePktQueueStatsEntry

clMeshNodePktQueueIndex		1.3.6.1.4.1.9.9.617.1.1.2.1.1
This object represents different types of queues in a mesh node. silver - queue for Best Effort packets. gold - queue for Video Application. platinum - queue for Voice Application. bronze - queue for Background. management - queue for management frames.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	silver(1), gold(2), platinum(3), bronze(4), management(5)

clMeshNodePktQueueAvg		1.3.6.1.4.1.9.9.617.1.1.2.1.2
This object represents average number of packets waiting in the queue during interval defined by object 'clMeshNodeStatsTimeInterval'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

clMeshNodePktQueuePeak		1.3.6.1.4.1.9.9.617.1.1.2.1.3
This object represents peak number of packets waiting in the queue during interval defined by object 'clMeshNodeStatsTimeInterval'.
Status: current	Access: read-only
OBJECT-TYPE
	Gauge32

clMeshNodePktQueuePktsDropped		1.3.6.1.4.1.9.9.617.1.1.2.1.4
This object represents total number of packets dropped due to queue overflow.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodePktQueueTimeStamp		1.3.6.1.4.1.9.9.617.1.1.2.1.5
This object represents when the queue statistics was last collected. This value is represented as a instance of sysUp time.
Status: current	Access: read-only
OBJECT-TYPE
	TimeStamp

clMeshNodePktQueueSize		1.3.6.1.4.1.9.9.617.1.1.2.1.6
This object represents max number of packets a queue can hold.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

clMeshNodeSecStatsTable		1.3.6.1.4.1.9.9.617.1.1.3
This table represents information about packets transmitted to or received from a mesh node during association or authentication of a child mesh node to parent mesh node. An (conceptual) entry in this table is created when a mesh node associates or authenticates with a parent mesh node. Entries are removed when the mesh node disassociates from controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshNodeSecStatsEntry

clMeshNodeSecStatsEntry		1.3.6.1.4.1.9.9.617.1.1.3.1
Each (conceptual) entry in this table represents count of security packets a mesh node exchange with its parent mesh node.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshNodeSecStatsEntry

clMeshNodeSecTxPkts		1.3.6.1.4.1.9.9.617.1.1.3.1.1
This object indicates total number of packets transmitted by this mesh node during security negotiations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeSecRxPkts		1.3.6.1.4.1.9.9.617.1.1.3.1.2
This object indicates total number of packets received by this mesh node during security negotiations.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAssocReqFailures		1.3.6.1.4.1.9.9.617.1.1.3.1.3
This object indicates total number of association request sent by this node as a child mesh node to a parent mesh node, that resulted in a failure.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAssocReqTimeouts		1.3.6.1.4.1.9.9.617.1.1.3.1.4
This object indicates total number of association request sent by this node, as a child mesh node to a parent mesh node, that timed out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAssocReqSuccess		1.3.6.1.4.1.9.9.617.1.1.3.1.5
This object indicates total number of association request sent by this node, as a child mesh node to a parent mesh node, that completed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAuthReqFailures		1.3.6.1.4.1.9.9.617.1.1.3.1.6
This object indicates total number of authenticaton request sent by this node, as a child mesh node to a parent mesh node, that failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAuthReqTimeouts		1.3.6.1.4.1.9.9.617.1.1.3.1.7
This object indicates total number of authentication request sent by this node, as a child mesh node to a parent mesh node, that timed out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeAuthReqSuccess		1.3.6.1.4.1.9.9.617.1.1.3.1.8
This object indicates total number of authentication request sent by this node, as a child mesh node to a parent mesh node, that completed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReassocReqFailures		1.3.6.1.4.1.9.9.617.1.1.3.1.9
This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReassocReqTimeouts		1.3.6.1.4.1.9.9.617.1.1.3.1.10
This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that timed out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReassocReqSuccess		1.3.6.1.4.1.9.9.617.1.1.3.1.11
This object indicates total number of re-association request sent by this node, as a child mesh node to a parent mesh node, that completed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReauthReqFailures		1.3.6.1.4.1.9.9.617.1.1.3.1.12
This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that failed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReauthReqTimeouts		1.3.6.1.4.1.9.9.617.1.1.3.1.13
This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that timed out.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeReauthReqSuccess		1.3.6.1.4.1.9.9.617.1.1.3.1.14
This object indicates total number of re-authentication request sent by this node, as a child mesh node to a parent mesh node, that completed.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeUnknownAssocReq		1.3.6.1.4.1.9.9.617.1.1.3.1.15
This object indicates total number of unknown association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeInvalidAssocReq		1.3.6.1.4.1.9.9.617.1.1.3.1.16
This object indicates total number of invalid association request that were received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be associated.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeUnknownReauthReq		1.3.6.1.4.1.9.9.617.1.1.3.1.17
This object indicates total number of unknown re-authentication request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeInvalidReauthReq		1.3.6.1.4.1.9.9.617.1.1.3.1.18
This object indicates total number of invalid re-authentication request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be re-authenticated.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeUnknownReassocReq		1.3.6.1.4.1.9.9.617.1.1.3.1.19
This object indicates total number of unknown re-association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a unknown neighbor.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeInvalidReassocReq		1.3.6.1.4.1.9.9.617.1.1.3.1.20
This object indicates total number of invalid re-association request received by this node, as a parent mesh node from a child mesh node. This may happen when child is a valid neighbor but is in a wrong state to be re-associated.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighStatsTable		1.3.6.1.4.1.9.9.617.1.2.1
This table represents information about packets transmitted to neighbor mesh node in wireless mesh network.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshNeighStatsEntry

clMeshNeighStatsEntry		1.3.6.1.4.1.9.9.617.1.2.1.1
An (conceptual) entry in this table is created when a mesh node transmit packets to another neighbor mesh node. Neighbor mesh node can be parent, child or neighbor. Entries are removed when the mesh node does not see another mesh node as neighbor.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshNeighStatsEntry

clMeshNeighAsParentTxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.1
This object provides number of packets transmitted as a parent to a neighbor mesh node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighAsParentRxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.2
This object indicates total number of packets received as a parent to a neighbor mesh node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighTotalTxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.3
This object indicates total number of packets transmitted to a neighbor mesh node. Total Tx packets is the sum of success Tx and retry Tx packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighSuccessTxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.4
This object indicates total number of packets successfully transmitted to a neighbor mesh node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighRetriesTxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.5
This object indicates total number of retries were made at MAC layer to send the packet to a neighbor mesh node.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNeighPoorSnrRxPkts		1.3.6.1.4.1.9.9.617.1.2.1.1.6
This object indicates total number of packets received from a neighbor mesh node whose SNR value were lower than threshold value. The threshold value is fixed at 8.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshAccessClassTable		1.3.6.1.4.1.9.9.617.1.4.1
This table represents mesh backhaul access class statistics for a mesh node. An entry in this table gets added when a mesh node associates to the controller and entry gets removed when mesh node disassociates from the controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshAccessClassEntry

clMeshAccessClassEntry		1.3.6.1.4.1.9.9.617.1.4.1.1
An (conceptual) entry in this table represents mesh backhaul access class statistics for a mesh node.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshAccessClassEntry

clMeshAccessClassTotalTxPkts		1.3.6.1.4.1.9.9.617.1.4.1.1.1
This object represents total number of packets transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshAccessClassSuccTxPkts		1.3.6.1.4.1.9.9.617.1.4.1.1.2
This object represents total number of packets successfully transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshAccessClassRetryPkts		1.3.6.1.4.1.9.9.617.1.4.1.1.3
This object represents total number of retried packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshAccessClassRTSAttempts		1.3.6.1.4.1.9.9.617.1.4.1.1.4
This object represents total number of RTS attempts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshAccessClassRTSSuccess		1.3.6.1.4.1.9.9.617.1.4.1.1.5
This object represents total number of successful RTS packets.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshDataRateStatsTable		1.3.6.1.4.1.9.9.617.1.5.1
This table represents statistics information of a mesh node for each of the supported data rates. An entry in this table gets added when a mesh node associates to the controller and entry gets removed when mesh node disassociates from the controller.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ClMeshDataRateStatsEntry

clMeshDataRateStatsEntry		1.3.6.1.4.1.9.9.617.1.5.1.1
An (conceptual) entry in this table represents mesh backhaul data Rate statistics for a mesh node.
Status: current	Access: not-accessible
OBJECT-TYPE
	ClMeshDataRateStatsEntry

cLMeshDataRateIndex		1.3.6.1.4.1.9.9.617.1.5.1.1.1
This object represents supported data rates of the access point.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

clMeshDataRateSuccTxPkts		1.3.6.1.4.1.9.9.617.1.5.1.1.2
This object represents total number of successfully transmitted packets .
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshDataRateTxAttempts		1.3.6.1.4.1.9.9.617.1.5.1.1.3
This object represents total number of transmitted attempts.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

clMeshNodeQueueOverflowNotifEnabled		1.3.6.1.4.1.9.9.617.2.1
The object to control the generation of 'ciscoLwappMeshQueueOverflow' notification. A value of 'true' indicates that the agent generates 'ciscoLwappMeshQueueOverflow' notification. A value of 'false' indicates that the agent doesn't generate ciscoLwappMeshQueueOverflow notification.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

clMeshNodeStatsTimeInterval		1.3.6.1.4.1.9.9.617.2.2
The object represents the time interval after which statistics are populated for each mesh node.
Status: current	Access: read-write
OBJECT-TYPE
	TimeInterval	18000..90000

clMeshNodeSecBackhaulChangeNotifEnabled		1.3.6.1.4.1.9.9.617.2.3
This object controls the generation of 'ciscoLwappMeshSecBackhaulChange' notification. A value of 'true' indicates this notification will be generated. A value of 'false' indicates this notification will not be generated.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

clMeshNodeExcessiveAssociationNotifEnabled		1.3.6.1.4.1.9.9.617.2.4
This object controls the generation of 'ciscoLwappMeshExcessiveAssociation' notification. A value of 'true' indicates notification will be generated. A value of 'false' indicates notification will not be generated.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

clMeshNodeExcessiveAssociationThreshold		1.3.6.1.4.1.9.9.617.2.5
This object represents cumulative association at parent by different child mesh nodes. Notification 'ciscoLwappMeshExcessiveAssociation' is raised when this number is crossed in one hour.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32	1..50

clMeshInitiatingApName		1.3.6.1.4.1.9.9.617.1.3.1
This object specifies the name of the AP that initiated the backhaul Change.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	SnmpAdminString	Size(0..32)

ciscoLwappMeshQueueOverflow		1.3.6.1.4.1.9.9.617.0.1
This notification is sent by the agent when a queue overflows and as a result packets get dropped. After each time interval, defined by object 'clMeshNodeStatsTimeInterval', mesh node sends its queue statistics to the controller which also includes cumulative number of packets dropped, defined by object 'clMeshNodePktQueuePktsDropped'. If the packets dropped is higher than the previous time notification generated then this notification is raised..
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

ciscoLwappMeshExcessiveAssociation		1.3.6.1.4.1.9.9.617.0.2
This notification is sent by the agent when cumulative association counter at parent mesh node exceeds value configured in 'clMeshNodeExcessiveAssociationThreshold'. cLApName is the name of the parent mesh node.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

ciscoLwappMeshSecBackhaulChange		1.3.6.1.4.1.9.9.617.0.3
This notification is sent by the agent when the MAP identified by clApName intiates the backhaul change from primary to secondary. cLApName identifies the AP that receives the change. The MAC address of the initiating AP is sent as a part of the index of clMeshNodeBackhaul. clMeshNodeBackhaul identifies the secondary backhaul channel used. The MAC address of the receiving AP is sent as a part of the index of cLApName.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

ciscoLwappMeshStatsMIBCompliances		1.3.6.1.4.1.9.9.617.3.1
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBGroups		1.3.6.1.4.1.9.9.617.3.2
OBJECT IDENTIFIER

ciscoLwappMeshStatsMIBCompliance		1.3.6.1.4.1.9.9.617.3.1.1
The compliance statement for the SNMP entities that implement the ciscoLwappMeshStatsMIB module.
Status: deprecated	Access: accessible-for-notify
MODULE-COMPLIANCE

ciscoLwappMeshStatsMIBComplianceR01		1.3.6.1.4.1.9.9.617.3.1.2
The compliance statement for the SNMP entities that implement the ciscoLwappMeshStatsMIB module.
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

ciscoLwappMeshNodeStatsGroup		1.3.6.1.4.1.9.9.617.3.2.1
This collection of objects represents statistics information about a mesh node such as the number of that were transmitted to or received from the mesh node, number association attempts, packets transmitted on secondary backhaul etc.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshNodePktQueueStatsGroup		1.3.6.1.4.1.9.9.617.3.2.2
This collection of objects represent packets is different types of queues to be transmitted to neighbor meshnode or to controller.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshNodeSecStatsGroup		1.3.6.1.4.1.9.9.617.3.2.3
This collection of objects represent packets that were transmitted or received by a child mesh node or a parent mesh node during security negotiations.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshStatsConfigObjsGroup		1.3.6.1.4.1.9.9.617.3.2.4
This collection of objects represent configuration objects for statistics of mesh network.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshStatsNotifsGroup		1.3.6.1.4.1.9.9.617.3.2.5
This collection of objects represent the mesh network statistics related notifications sent by the agent to a network management station.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP

ciscoLwappMeshNeighStatsGroup		1.3.6.1.4.1.9.9.617.3.2.6
This collection of objects represent packets transmitted or received by a mesh node to or from a neighbor mesh node.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshStatsNotifObjsGroup		1.3.6.1.4.1.9.9.617.3.2.7
This collection of objects represent the information carried by the mesh network statistics related notifications sent by the agent to a network management station.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshAccessClassGroup		1.3.6.1.4.1.9.9.617.3.2.8
Thia collection of objects represents statistics information about a meshnode such as the number of that were successful transmitted, number of dropped packets, retried packets.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshDataRateStatsGroup		1.3.6.1.4.1.9.9.617.3.2.9
Thia collection of objects represents statistics information about a mesh node the number of that were successful transmitted packets, of each data rate.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshNodeStatsGroupSup1		1.3.6.1.4.1.9.9.617.3.2.10
This collection of objects represent statistics information of a mesh node such as the number of packets that were transmitted to or received from the mesh node, number association attempts, packets transmitted on secondary backhaul.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshStatsConfigObjsGroupSup1		1.3.6.1.4.1.9.9.617.3.2.11
This collection of objects represent configuration objects for statistics of mesh network.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

ciscoLwappMeshStatsNotifsGroupSup1		1.3.6.1.4.1.9.9.617.3.2.12
This collection of objects represent the mesh network statistics related notifications sent by the agent to a network management station.
Status: current	Access: accessible-for-notify
NOTIFICATION-GROUP