CISCO-LWAPP-IPV6-MIB

File: CISCO-LWAPP-IPV6-MIB.mib (46241 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-SMI CISCO-LWAPP-ACL-MIB CISCO-LWAPP-DOT11-CLIENT-MIB
INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP DisplayString TruthValue
RowStatus ciscoMgmt claCpuAclName
claCpuAclPacketApplicability claAclCounterEnable claAclCounterClear
claAclRuleHits cldcClientMacAddress InetAddressType
InetAddress SnmpAdminString

Defined Types

CLIpv6AclEntry  
SEQUENCE    
  cLIpv6AclName OCTET STRING
  cLIpv6AclApplyMode INTEGER
  cLIpv6AclCounterClear TruthValue
  cLIpv6AclRowStatus RowStatus

CLIpv6AclRuleEntry  
SEQUENCE    
  cLIpv6AclRuleIndex Unsigned32
  cLIpv6AclRuleAction INTEGER
  cLIpv6AclRuleDirection INTEGER
  cLIpv6AclRuleSourceInetAddressType InetAddressType
  cLIpv6AclRuleSourceInetAddress InetAddress
  cLIpv6AclRuleSourcePrefixLength Unsigned32
  cLIpv6AclRuleDestinationInetAddressType InetAddressType
  cLIpv6AclRuleDestinationInetAddress InetAddress
  cLIpv6AclRuleDestinationPrefixLength Unsigned32
  cLIpv6AclRuleProtocol Unsigned32
  cLIpv6AclRuleStartSourcePort Unsigned32
  cLIpv6AclRuleEndSourcePort Unsigned32
  cLIpv6AclRuleStartDestinationPort Unsigned32
  cLIpv6AclRuleEndDestinationPort Unsigned32
  cLIpv6AclRuleDscp Unsigned32
  cLIpv6AclNewRuleIndex Unsigned32
  cLIpv6AclRuleHits Counter32
  cLIpv6AclRuleRowStatus RowStatus

CLIpv6RaFilteringClientInfoEntry  
SEQUENCE    
  cLIpv6RaFilteringClientInfoApName OCTET STRING
  cLIpv6RaFilteringClientInfoWlan Unsigned32
  cLIpv6RaFilteringClientInfoPktsDropped Counter32

CLIpv6NeighborBindingCounterEntry  
SEQUENCE    
  cLIpv6NeighborBindingCounterType INTEGER
  cLIpv6NeighborBindingCounterNdpRs Counter32
  cLIpv6NeighborBindingCounterNdpRa Counter32
  cLIpv6NeighborBindingCounterNdpNs Counter32
  cLIpv6NeighborBindingCounterNdpNa Counter32
  cLIpv6NeighborBindingCounterNdpRedirect Counter32
  cLIpv6NeighborBindingCounterNdpCertSol Counter32
  cLIpv6NeighborBindingCounterNdpCertAdv Counter32
  cLIpv6NeighborBindingCounterDhcpV6Sol Counter32
  cLIpv6NeighborBindingCounterDhcpV6Adv Counter32
  cLIpv6NeighborBindingCounterDhcpV6Request Counter32
  cLIpv6NeighborBindingCounterDhcpV6Confirm Counter32
  cLIpv6NeighborBindingCounterDhcpV6Renew Counter32
  cLIpv6NeighborBindingCounterDhcpV6Rebind Counter32
  cLIpv6NeighborBindingCounterDhcpV6Reply Counter32
  cLIpv6NeighborBindingCounterDhcpV6Release Counter32
  cLIpv6NeighborBindingCounterDhcpV6Decline Counter32
  cLIpv6NeighborBindingCounterDhcpV6Recfg Counter32
  cLIpv6NeighborBindingCounterDhcpV6InfoReq Counter32
  cLIpv6NeighborBindingCounterDhcpV6RelayForward Counter32
  cLIpv6NeighborBindingCounterDhcpV6RelayReplay Counter32

CLIpv6NbSnoopingDropCounterEntry  
SEQUENCE    
  cLIpv6NbSnoopingDropCounterType INTEGER
  cLIpv6NbSnoopingDropCounterTotal Counter32
  cLIpv6NbSnoopingDropCounterSilent Counter32
  cLIpv6NbSnoopingDropCounterReasonInt Counter32
  cLIpv6NbSnoopingDropCounterReasonCga Counter32
  cLIpv6NbSnoopingDropCounterReasonRsa Counter32
  cLIpv6NbSnoopingDropCounterReasonLimit Counter32
  cLIpv6NbSnoopingDropCounterReasonMartian Counter32
  cLIpv6NbSnoopingDropCounterReasonMartianMac Counter32
  cLIpv6NbSnoopingDropCounterReasonNotAllowed Counter32
  cLIpv6NbSnoopingDropCounterReasonNotAuthorised Counter32
  cLIpv6NbSnoopingDropCounterReasonStop Counter32

Defined Values

ciscoLwappIpv6MIB 1.3.6.1.4.1.9.9.9999
This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about the ACLs on the controller. Particularly this mib covers the CPU ACLs for the wireless controllers. Traffic to the controller CPU comes from the NPU (Network Processing Unit). Using CPU ACLs, the user can place restrictions on type of traffic reaching the CPU of the controller from the NPU. CPU ACLs introduce an ACL for the traffic to the CPU of controller. With this ACL the type of packets reaching the CPU can be controlled. The mode of operation is as follows. The administrator designates one ACL for the traffic to the CPU. The ACL kicks in for packets from the NPU to the CPU. Each ACL is an ordered set of rules. If a rule matches then action for that rule is applied to the packet. The decision to send or drop the packet is taken based on the action parameter of the ACL. There will be no ACL for the packets from the CPU to the NPU. GLOSSARY Access Control List ( ACL ) A list of rules used to restrict the traffic reaching an interface or the CPU. Each ACL is an ordered set of rules and actions. If a rule matches then the action for that rule is applied to the packet. Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides acess to the distribution services via the wireless medium for associated clients. CPU ACL ( CPU ACL ) The ACL applied to the CPU. This controls the type of traffic reaching the CPU of the controller. Network Processing Unit ( NPU ) This entity is responsible for forwarding traffic to the CPU. The only exceptions are data coming thorugh the console port and the Service port i.e. these communicate directly with the CPU and not via the NPU. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communciation between the Access Points and the Central Controller. Cryptographically Generated Addresses (CGA) Cryptographically Generated Addresses (CGAs) are IPv6 addresses, which allow for a secure association of an IPv6 address, the CGA, with a public key. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications.
MODULE-IDENTITY    

ciscoLwappIpv6MIBNotifs 1.3.6.1.4.1.9.9.9999.0
OBJECT IDENTIFIER    

ciscoLwappIpv6MIBObjects 1.3.6.1.4.1.9.9.9999.1
OBJECT IDENTIFIER    

ciscoLwappIpv6MIBConform 1.3.6.1.4.1.9.9.9999.2
OBJECT IDENTIFIER    

ciscoLwappIpv6Config 1.3.6.1.4.1.9.9.9999.1.1
OBJECT IDENTIFIER    

ciscoLwappIpv6Stats 1.3.6.1.4.1.9.9.9999.1.2
OBJECT IDENTIFIER    

ciscoLwappIpv6NbRaThrottleConfig 1.3.6.1.4.1.9.9.9999.1.1.4
OBJECT IDENTIFIER    

ciscoLwappIpv6NbTimerConfig 1.3.6.1.4.1.9.9.9999.1.1.5
OBJECT IDENTIFIER    

cLIpv6AclTable 1.3.6.1.4.1.9.9.9999.1.1.1
The table listing IPv6 ACLs (Access Control Lists) on the Switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CLIpv6AclEntry

cLIpv6AclEntry 1.3.6.1.4.1.9.9.9999.1.1.1.1
Each entry in this table provides information about one IPv6 ACL of the controller.
OBJECT-TYPE    
  CLIpv6AclEntry  

cLIpv6AclName 1.3.6.1.4.1.9.9.9999.1.1.1.1.1
Name of the Access Control List.
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

cLIpv6AclApplyMode 1.3.6.1.4.1.9.9.9999.1.1.1.1.2
The apply mode of the ACL on the switch. Mode value 'applied' means the ACL has been applied on the switch.
OBJECT-TYPE    
  INTEGER notapplied(0), applied(1)  

cLIpv6AclCounterClear 1.3.6.1.4.1.9.9.9999.1.1.1.1.3
This object when set to 'true', will clear the counter of the ACL represented by the unique ACL name.
OBJECT-TYPE    
  TruthValue  

cLIpv6AclRowStatus 1.3.6.1.4.1.9.9.9999.1.1.1.1.4
Row Status of the IPv6 ACL. Modification of row is possible.
OBJECT-TYPE    
  RowStatus  

cLIpv6AclRuleTable 1.3.6.1.4.1.9.9.9999.1.1.2
The table listing Acl Rules(Access Control List Entries) on the ACL with name cLIpv6AclName.
OBJECT-TYPE    
  SEQUENCE OF  
    CLIpv6AclRuleEntry

cLIpv6AclRuleEntry 1.3.6.1.4.1.9.9.9999.1.1.2.1
....
OBJECT-TYPE    
  CLIpv6AclRuleEntry  

cLIpv6AclRuleIndex 1.3.6.1.4.1.9.9.9999.1.1.2.1.1
Index of the ACL rule. This can be updated to reset the sequence of the rules of an ACL.
OBJECT-TYPE    
  Unsigned32 1..64  

cLIpv6AclRuleAction 1.3.6.1.4.1.9.9.9999.1.1.2.1.2
The permission mode of a rule.
OBJECT-TYPE    
  INTEGER deny(0), permit(1)  

cLIpv6AclRuleDirection 1.3.6.1.4.1.9.9.9999.1.1.2.1.3
The direction of the packet to which the rule may be applied.
OBJECT-TYPE    
  INTEGER inbound(0), outbound(1), any(2)  

cLIpv6AclRuleSourceInetAddressType 1.3.6.1.4.1.9.9.9999.1.1.2.1.4
Source Inet Address type of the ACL rule.
OBJECT-TYPE    
  InetAddressType  

cLIpv6AclRuleSourceInetAddress 1.3.6.1.4.1.9.9.9999.1.1.2.1.5
Source Inet Address of the ACL rule.
OBJECT-TYPE    
  InetAddress  

cLIpv6AclRuleSourcePrefixLength 1.3.6.1.4.1.9.9.9999.1.1.2.1.6
This object denotes the prefix length for Source Inet address of the ACL rule.
OBJECT-TYPE    
  Unsigned32 0..128  

cLIpv6AclRuleDestinationInetAddressType 1.3.6.1.4.1.9.9.9999.1.1.2.1.7
Destination Inet Address type of the ACL rule.
OBJECT-TYPE    
  InetAddressType  

cLIpv6AclRuleDestinationInetAddress 1.3.6.1.4.1.9.9.9999.1.1.2.1.8
Destination Inet Address of the ACL rule.
OBJECT-TYPE    
  InetAddress  

cLIpv6AclRuleDestinationPrefixLength 1.3.6.1.4.1.9.9.9999.1.1.2.1.9
This object denotes the prefix length for Destination Inet address of the ACL rule.
OBJECT-TYPE    
  Unsigned32 0..128  

cLIpv6AclRuleProtocol 1.3.6.1.4.1.9.9.9999.1.1.2.1.10
Protocol of the packet. It can be either of the pre specified protocols like TCP, UDP, ICMP, ESP, AH, GRE, IP, Ethernet Over IP, OSPF or any number between 0 and 255. A value 256 implies that this rule applies to 'Any' protocol.
OBJECT-TYPE    
  Unsigned32 0..256  

cLIpv6AclRuleStartSourcePort 1.3.6.1.4.1.9.9.9999.1.1.2.1.11
This object represents the start Source Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule applies to 'Any' source port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
OBJECT-TYPE    
  Unsigned32 0..65535  

cLIpv6AclRuleEndSourcePort 1.3.6.1.4.1.9.9.9999.1.1.2.1.12
This object represents the end Source Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule applies to 'Any' source port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
OBJECT-TYPE    
  Unsigned32 0..65535  

cLIpv6AclRuleStartDestinationPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.13
This object represents the start Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
OBJECT-TYPE    
  Unsigned32 0..65535  

cLIpv6AclRuleEndDestinationPort 1.3.6.1.4.1.9.9.9999.1.1.2.1.14
This object represents the End Destination Port of the packet. It can be either of the pre specified ports like HTTP, HTTPS, Telnet, RADIUS etc or any number between 0 and 65535. A value 65536 implies that this rule aplpies to 'Any' Destination port. This value can be set only if the protocol is set to TCP or UDP. Otherwise the value is set to Any(65536)
OBJECT-TYPE    
  Unsigned32 0..65535  

cLIpv6AclRuleDscp 1.3.6.1.4.1.9.9.9999.1.1.2.1.15
DSCP value of the rule. A value 256 implies Any
OBJECT-TYPE    
  Unsigned32 0..256  

cLIpv6AclNewRuleIndex 1.3.6.1.4.1.9.9.9999.1.1.2.1.16
New Index of the ACL rule. This attribute should be updated if the requirement is to reset the sequence of the rules of an ACL. A read on this will not yield anything.
OBJECT-TYPE    
  Unsigned32 1..64  

cLIpv6AclRuleHits 1.3.6.1.4.1.9.9.9999.1.1.2.1.17
Number of hits in the particular rule under the ACL.This object is cleared by setting the cLIpv6AclCounterClear object.
OBJECT-TYPE    
  Counter32  

cLIpv6AclRuleRowStatus 1.3.6.1.4.1.9.9.9999.1.1.2.1.18
Row Status of the ACL Rule.
OBJECT-TYPE    
  RowStatus  

ciscoLwappIpv6RaFiltering 1.3.6.1.4.1.9.9.9999.1.1.3
OBJECT IDENTIFIER    

cLIpv6RaFilteringEnabled 1.3.6.1.4.1.9.9.9999.1.1.3.1
This object represents the IPv6 RA filtering configuration on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6RaFilteringOnApEnabled 1.3.6.1.4.1.9.9.9999.1.1.3.2
This object represents the IPv6 RA filtering configuration on the controller. When set to true, IPv6 RA filtering is enabled on the AP. When set to false, IPv6 RA filtering is disabled on the AP.
OBJECT-TYPE    
  TruthValue  

cLIpv6RaFilteringClientInfoTable 1.3.6.1.4.1.9.9.9999.1.1.3.3
The table lists the RA Packets Drop per client.
OBJECT-TYPE    
  SEQUENCE OF  
    CLIpv6RaFilteringClientInfoEntry

cLIpv6RaFilteringClientInfoEntry 1.3.6.1.4.1.9.9.9999.1.1.3.3.1
Each entry in this table provides information about Ra Packets drop per client.
OBJECT-TYPE    
  CLIpv6RaFilteringClientInfoEntry  

cLIpv6RaFilteringClientInfoApName 1.3.6.1.4.1.9.9.9999.1.1.3.3.1.1
This is the AP Name on which the client is associated.
OBJECT-TYPE    
  OCTET STRING  

cLIpv6RaFilteringClientInfoWlan 1.3.6.1.4.1.9.9.9999.1.1.3.3.1.2
This is the vap id on which the client is associated.
OBJECT-TYPE    
  Unsigned32  

cLIpv6RaFilteringClientInfoPktsDropped 1.3.6.1.4.1.9.9.9999.1.1.3.3.1.3
This is the number of RA Packets dropped for the client.
OBJECT-TYPE    
  Counter32  

cLIpv6NbRaThrottleEnabled 1.3.6.1.4.1.9.9.9999.1.1.4.1
This object represents the IPv6 RA Throttle Policy configuration on the controller. When set to true, IPv6 RA Throttling is enabled on the controller. When set to false, IPv6 RA Throttling is disabled on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbRaThrottlePeriod 1.3.6.1.4.1.9.9.9999.1.1.4.2
This object represents the RA Throttler Policy throttle period.
OBJECT-TYPE    
  Unsigned32 10..86400  

cLIpv6NbRaThrottleMaxThrough 1.3.6.1.4.1.9.9.9999.1.1.4.3
This object represents the RA Throttler Policy Max Through Value.
OBJECT-TYPE    
  Unsigned32 0..256  

cLIpv6NbRaThrottleMaxThroughNoLimitEnabled 1.3.6.1.4.1.9.9.9999.1.1.4.4
This object represents the RA Throttler Policy Max Through Nolimit Value. When NoLimit is set to true, the value for Max Through(cLIpv6RaThrottlerPolicyMaxThrough) will not be set. When NoLimit is set to false, the vlaue for Max Through will be set.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbRaThrottleIntervalOption 1.3.6.1.4.1.9.9.9999.1.1.4.5
This object represents the RA Throttler Policy interval option.
OBJECT-TYPE    
  INTEGER ignore(1), passthrough(2), throttle(3)  

cLIpv6NbRaThrottleAllowAtleast 1.3.6.1.4.1.9.9.9999.1.1.4.6
This object represents the RA Throttler Policy allow atleast limit
OBJECT-TYPE    
  Unsigned32 0..32  

cLIpv6NbRaThrottleAllowAtmost 1.3.6.1.4.1.9.9.9999.1.1.4.7
This object represents the RA Throttler Policy allow atmost limit
OBJECT-TYPE    
  Unsigned32 0..256  

cLIpv6NbRaThrottleAllowNoLimitEnabled 1.3.6.1.4.1.9.9.9999.1.1.4.8
This object represents the RA Throttler Policy Allow Nolimit Value. When NoLimit is set to true, the value for Allow Atmost(cLIpv6RaThrottlerPolicyAllowAtmost) will not be set. When NoLimit is set to false, the vlaue for Allow Atmost will be set.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbTimerDownLifeTimeEnabled 1.3.6.1.4.1.9.9.9999.1.1.5.1
This object represents the Neighbor Binding DownLife Timer. When set to true, DownLife timer is enabled on the controller. When set to false, DownLife timer is disabled on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbTimerDownLifeTimeInterval 1.3.6.1.4.1.9.9.9999.1.1.5.2
This object represents interval of Neighbor Binding DownLife Timer. The interval is set on the controller only when the DownLife Timer is enabled on the controller.
OBJECT-TYPE    
  Unsigned32 0..86400  

cLIpv6NbTimerStaleLifeTimeEnabled 1.3.6.1.4.1.9.9.9999.1.1.5.3
This object represents the Neighbor Binding StaleLife Timer. When set to true, StaleLife timer is enabled on the controller. When set to false, Staletime timer is disabled on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbTimerStaleLifeTimeInterval 1.3.6.1.4.1.9.9.9999.1.1.5.4
This object represents interval of NeighborBinding StaleLife Timer. The interval is set on the controller only when the StaleLife Timer is enabled on the controller.
OBJECT-TYPE    
  Unsigned32 0..86400  

cLIpv6NbTimerReachableLifeTimeEnabled 1.3.6.1.4.1.9.9.9999.1.1.5.5
This object represents the Neighbor Binding ReachableLife Timer. When set to true, ReachableLife timer is enabled on the controller. When set to false, ReachableLife timer is disabled on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6NbTimerReachableLifeTimeInterval 1.3.6.1.4.1.9.9.9999.1.1.5.6
This object represents interval of NeighborBinding ReachableLife Timer. The interval is set on the controller only when the StaleLife Timer is enabled on the controller.
OBJECT-TYPE    
  Unsigned32 0..86400  

cLIpv6NbTimerNsMulticastCacheMissForward 1.3.6.1.4.1.9.9.9999.1.1.5.7
This object represents the NS Multicast CacheMiss Forward When set to true,NS Multicast CacheMiss Forward is enabled on the controller. When set to false,NS Multicast CacheMiss Forward is disabled on the controller.
OBJECT-TYPE    
  TruthValue  

cLIpv6NeighborBindingCounterTable 1.3.6.1.4.1.9.9.9999.1.2.1
This table represents the IPv6 Neighbor binding Counters of the controller.
OBJECT-TYPE    
  SEQUENCE OF  
    CLIpv6NeighborBindingCounterEntry

cLIpv6NeighborBindingCounterEntry 1.3.6.1.4.1.9.9.9999.1.2.1.1
Each entry in this table represents the IPv6 Neighbor binding Counter on the controller. Entries cannot be added/deleted and is populated by the Type of counter.
OBJECT-TYPE    
  CLIpv6NeighborBindingCounterEntry  

cLIpv6NeighborBindingCounterType 1.3.6.1.4.1.9.9.9999.1.2.1.1.1
This object represents the type of IPv6 Neighbor Binding Counter.
OBJECT-TYPE    
  INTEGER receivedMessages(1), bridgedMessages(2)  

cLIpv6NeighborBindingCounterNdpRs 1.3.6.1.4.1.9.9.9999.1.2.1.1.2
This object represents the number of NDP Router Solicitation counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpRa 1.3.6.1.4.1.9.9.9999.1.2.1.1.3
This object represents the number of NDP Router Advertisement counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpNs 1.3.6.1.4.1.9.9.9999.1.2.1.1.4
This object represents the number of NDP Neighbor Solicitation counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpNa 1.3.6.1.4.1.9.9.9999.1.2.1.1.5
This object represents the number of NDP Neighbor Advertisement counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpRedirect 1.3.6.1.4.1.9.9.9999.1.2.1.1.6
This object represents the number of NDP Neighbor Redirect counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpCertSol 1.3.6.1.4.1.9.9.9999.1.2.1.1.7
This object represents the number of NDP Neighbor Certificate Solicitation counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterNdpCertAdv 1.3.6.1.4.1.9.9.9999.1.2.1.1.8
This object represents the number of NDP Neighbor Certificate Advertisement counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Sol 1.3.6.1.4.1.9.9.9999.1.2.1.1.9
This object represents the number of DHCPv6 Solicitated counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Adv 1.3.6.1.4.1.9.9.9999.1.2.1.1.10
This object represents the number of DHCPv6 Advertisement counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Request 1.3.6.1.4.1.9.9.9999.1.2.1.1.11
This object represents the number of DHCPv6 Request counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Confirm 1.3.6.1.4.1.9.9.9999.1.2.1.1.12
This object represents the number of DHCPv6 Confirm counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Renew 1.3.6.1.4.1.9.9.9999.1.2.1.1.13
This object represents the number of DHCPv6 Renew counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Rebind 1.3.6.1.4.1.9.9.9999.1.2.1.1.14
This object represents the number of DHCPv6 Rebind counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Reply 1.3.6.1.4.1.9.9.9999.1.2.1.1.15
This object represents the number of DHCPv6 Reply counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Release 1.3.6.1.4.1.9.9.9999.1.2.1.1.16
This object represents the number of DHCPv6 Release counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Decline 1.3.6.1.4.1.9.9.9999.1.2.1.1.17
This object represents the number of DHCPv6 Decline counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6Recfg 1.3.6.1.4.1.9.9.9999.1.2.1.1.18
This object represents the number of DHCPv6 Reconfigure counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6InfoReq 1.3.6.1.4.1.9.9.9999.1.2.1.1.19
This object represents the number of DHCPv6 Information request counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6RelayForward 1.3.6.1.4.1.9.9.9999.1.2.1.1.20
This object represents the number of DHCPv6 Relay counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterDhcpV6RelayReplay 1.3.6.1.4.1.9.9.9999.1.2.1.1.21
This object represents the number of DHCPv6 Relay Reply counters.
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounter 1.3.6.1.4.1.9.9.9999.1.2.2
OBJECT IDENTIFIER    

cLIpv6NbNdSuppressDropCounterTotal 1.3.6.1.4.1.9.9.9999.1.2.2.1
This object specifies the Suppress Drop Counter Total Value including all reasons.
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounterReasonSilent 1.3.6.1.4.1.9.9.9999.1.2.2.2
This object represents the Suppress Drop Counter Value for the reason slient drop.
OBJECT-TYPE    
  Counter32  

cIpv6NbNdSuppressDropCounterReasonInOut 1.3.6.1.4.1.9.9.9999.1.2.2.3
This object represents the Suppress Drop Counter Value for the reason owner is on the input interface.
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounterReasonDad 1.3.6.1.4.1.9.9.9999.1.2.2.4
This object represents the Suppress Drop Counter Value for the reason duplicate address detected .
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounterReasonUnicast 1.3.6.1.4.1.9.9.9999.1.2.2.5
This object represents the Suppress Drop Counter Value for the reason unicast suppressed.
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounterReasonMulticast 1.3.6.1.4.1.9.9.9999.1.2.2.6
This object represents the Suppress Drop Counter Value for the reason multicast suppressed.
OBJECT-TYPE    
  Counter32  

cLIpv6NbNdSuppressDropCounterReasonInt 1.3.6.1.4.1.9.9.9999.1.2.2.7
This object represents the Suppress Drop Counter Value for the reason internal failure.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterTable 1.3.6.1.4.1.9.9.9999.1.2.3
This table represents the IPv6 Neighbor binding Snooping Drop Counters of the controller.
OBJECT-TYPE    
  SEQUENCE OF  
    CLIpv6NbSnoopingDropCounterEntry

cLIpv6NbSnoopingDropCounterEntry 1.3.6.1.4.1.9.9.9999.1.2.3.1
Each entry in this table represents the IPv6 Neighbor binding Snooping drop Counter on the controller. Entries cannot be added/deleted and is populated by the Type of Snooping drop counter.
OBJECT-TYPE    
  CLIpv6NbSnoopingDropCounterEntry  

cLIpv6NbSnoopingDropCounterType 1.3.6.1.4.1.9.9.9999.1.2.3.1.1
This object represents the type of IPv6 Neighbor Binding Snooping Drop Counter.
OBJECT-TYPE    
  INTEGER ndpRs(1), ndpRa(2), ndpNs(3), ndpNa(4), ndpRedirect(5), ndpCertSol(6), ndpCertAdv(7), nhcpV6Sol(8), nhcpV6Adv(9), dhcpV6Request(10), dhcpV6Confirm(11), dhcpV6Renew(12), dhcpV6Rebind(13), dhcpV6Reply(14), dhcpV6Release(15), dhcpV6Decline(16), dhcpV6Recfg(17), dhcpV6InfoReq(18), dhcpV6RelayForward(19), dhcpV6RelayReplay(20)  

cLIpv6NbSnoopingDropCounterTotal 1.3.6.1.4.1.9.9.9999.1.2.3.1.2
This object represents the Snooping Drop Counter Total Value including all reasons.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterSilent 1.3.6.1.4.1.9.9.9999.1.2.3.1.3
This object represents the Snooping Drop Counter Value for the reason Silent drop.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonInt 1.3.6.1.4.1.9.9.9999.1.2.3.1.4
This object represents the Snooping Drop Counter Value for the reason internal failure.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonCga 1.3.6.1.4.1.9.9.9999.1.2.3.1.5
This object represents the Snooping Drop Counter Value for the reason CGA option does not verify.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonRsa 1.3.6.1.4.1.9.9.9999.1.2.3.1.6
This object represents the Snooping Drop Counter Value for the reason RSA signature does not verify.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonLimit 1.3.6.1.4.1.9.9.9999.1.2.3.1.7
This object represents the Snooping Drop Counter Value for the reason address limit reached.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonMartian 1.3.6.1.4.1.9.9.9999.1.2.3.1.8
This object represents the Snooping Drop Counter Value for the reason martian packet.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonMartianMac 1.3.6.1.4.1.9.9.9999.1.2.3.1.9
This object represents the Snooping Drop Counter Value for the reason martian mac.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonNotAllowed 1.3.6.1.4.1.9.9.9999.1.2.3.1.10
This object represents the Snooping Counter Value for the reason more trusted entry exists.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonNotAuthorised 1.3.6.1.4.1.9.9.9999.1.2.3.1.11
This object represents the Snooping Drop Counter Value for the reason packet not authorized on port.
OBJECT-TYPE    
  Counter32  

cLIpv6NbSnoopingDropCounterReasonStop 1.3.6.1.4.1.9.9.9999.1.2.3.1.12
This object represents the Snooping Drop Counter Value for reason packet accepted but not forwarded.
OBJECT-TYPE    
  Counter32  

cLIpv6NeighborBindingCounterClear 1.3.6.1.4.1.9.9.9999.1.1.6
This object when set to 'true', will clear the counter of the IPv6 Neighbor Binding.
OBJECT-TYPE    
  TruthValue  

cLIpv6GlobalEnabled 1.3.6.1.4.1.9.9.9999.1.1.7
This object represents the Global state of IPv6. A value of 'true', will enable the Global IPv6 state. A value of 'false', will disable the Global IPv6 state.
OBJECT-TYPE    
  TruthValue