CISCO-LATITUDE-MIB

File: CISCO-LATITUDE-MIB.mib (10872 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 enterprises DisplayString
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP

Defined Values

latitudeComm 1.3.6.1.4.1.7185
The MIB module for the managment of Cisco Latitude MeetingPlace conferencing solution. MeetignPlace MIB traps are generated under the following conditions. - T1 status - Gateway System Integrity - Major hardware alarm - Minor hardware alarm - Major software alarm - Minor software alarm Each major and minor hardware and software notification includes an integer alarm code that indicates which software module and server reported the alarm. For hardware alarms, four additional codes identify the device type, the device address, slot number, and port number.
MODULE-IDENTITY    

latitudeReg 1.3.6.1.4.1.7185.1
OBJECT IDENTIFIER    

latitudeModules 1.3.6.1.4.1.7185.1.1
OBJECT IDENTIFIER    

latitudeGeneric 1.3.6.1.4.1.7185.2
OBJECT IDENTIFIER    

latitudeProducts 1.3.6.1.4.1.7185.3
OBJECT IDENTIFIER    

meetingplace 1.3.6.1.4.1.7185.3.1
OBJECT IDENTIFIER    

meetingplaceConfs 1.3.6.1.4.1.7185.3.1.1
OBJECT IDENTIFIER    

meetingplaceObjs 1.3.6.1.4.1.7185.3.1.2
OBJECT IDENTIFIER    

meetingplaceEvents 1.3.6.1.4.1.7185.3.1.3
OBJECT IDENTIFIER    

meetingplaceEventsV2 1.3.6.1.4.1.7185.3.1.3.0
OBJECT IDENTIFIER    

mpExCode 1.3.6.1.4.1.7185.3.1.3.1
MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

mpSysUnit 1.3.6.1.4.1.7185.3.1.3.2
MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

mpHwDev 1.3.6.1.4.1.7185.3.1.3.3
MeetingPlace Hardware Device Code. This defines the class of device that generated a hardware fault. 'mpTemperature' - Temperature Sensor 'mpPowerSupply' - Power Supply 'mpSerialPort' - Serial Port 'mpTapeDrive' - Tape Drive 'mpHardDrive' - Hard Drive 'mpDisketteDrive' - Diskette Drive 'mpEthernet' - Ethernet Port 'mpModem' - Modem Port 'mpSystemMisc' - System Misc 'mpDSPMSC' - Master Switch Controller 'mpDSPPRC' - Port Resource Card 'mpT1Blade' - T1 Blade 'mpAnalogBlade' - Analog Blade 'mpT1Network' - T1 Network Interface 'mpSystemIntegrityCard' - System Integrity Card 'mpMainMemory' - Main Memory 'mpE1Blade' - E1 Blade 'mpE1Network' - E1 Network Interface 'mpVoIPBlade' - VoIP Blade
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mpTemperature(1), mpPowerSupply(2), mpSerialPort(3), mpTapeDrive(4), mpHardDrive(5), mpDisketteDrive(6), mpEthernet(7), mpModem(8), mpSystemMisc(9), mpDSPMSC(10), mpDSPPRC(11), mpT1Blade(12), mpAnalogBlade(13), mpT1Network(14), mpSystemIntegrityCard(15), mpMainMemory(16), mpE1Blade(17), mpE1Network(18), mpVoIPBlade(19)  

mpHwUnit 1.3.6.1.4.1.7185.3.1.3.4
MeetingPlace Hardware Device Unit Number. This is the unit number of the hardware device that generated a fault. For a disk this would be the SCSI ID. For a blade this would the the logical card number as defined in the system configuration.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

mpHwSlot 1.3.6.1.4.1.7185.3.1.3.5
MeetingPlace Hardware Device Slot Number. This is the location of the hardware device that generated a fault. For a blade this would be the slot number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

mpHwPort 1.3.6.1.4.1.7185.3.1.3.6
MeetingPlace Hardware Device Port Number. This is the logical port number associated with a hardware fault. For a T1 alarm, this is the logical span number.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..254  

mpAlarmDesc 1.3.6.1.4.1.7185.3.1.3.7
MeetingPlace Alarm Description. This is a one-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

mpT1Down 1.3.6.1.4.1.7185.3.1.3.0.1
MeetingPlace T1 Down Alarm. This indicates generically there is a problem with a telephony port. There are several possible alarm conditions that will generate this trap. This is from Release 4.3.
Status: current Access: read-only
NOTIFICATION-TYPE    

mpGWSimAlarm 1.3.6.1.4.1.7185.3.1.3.0.2
MeetingPlace Gateway Alarm. This indicates an alarm generated by a MeetingPlace gateway. There are several alarms that will generate this trap. This is from Release 4.3
Status: current Access: read-only
NOTIFICATION-TYPE    

mpMajHwAlarm 1.3.6.1.4.1.7185.3.1.3.0.3
MeetingPlace Major Hardware Alarm. This is generated any time MeetingPlace reports a major hardware alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

mpMinHwAlarm 1.3.6.1.4.1.7185.3.1.3.0.4
MeetingPlace Minor Hardware Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

mpMajSwAlarm 1.3.6.1.4.1.7185.3.1.3.0.5
MeetingPlace Major Software Alarm. This is generated any time MeetingPlace reports a major software alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

mpMinSwAlarm 1.3.6.1.4.1.7185.3.1.3.0.6
MeetingPlace Minor Software Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

ciscoLatitudeMIBCompliances 1.3.6.1.4.1.7185.3.1.1.1
OBJECT IDENTIFIER    

ciscoLatitudeMIBGroups 1.3.6.1.4.1.7185.3.1.1.2
OBJECT IDENTIFIER    

ciscoLatitudeMIBComplianceRev1 1.3.6.1.4.1.7185.3.1.1.1.1
The compliance statement for entities which implement the MeetingPlace MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ciscoLatitudeAlarmGroupRev1 1.3.6.1.4.1.7185.3.1.1.2.1
Alarms objects within MeetingPlace.
Status: current Access: read-only
OBJECT-GROUP    

ciscoLatitudeNotifsGroupRev1 1.3.6.1.4.1.7185.3.1.1.2.2
Notifications applicable to meetingplace.
Status: current Access: read-only
NOTIFICATION-GROUP