CISCO-L2NAT-MIB

File: CISCO-L2NAT-MIB.mib (44057 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB CISCO-TC
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Counter32 Counter64 Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP RowStatus
StorageType InetAddressType InetAddress
SnmpAdminString CiscoInetAddressMask ciscoMgmt

Defined Types

Cl2natInstConfigInstanceEntry  
SEQUENCE    
  cl2natInstConfigInstanceName SnmpAdminString
  cl2natInstConfigPermitIn BITS
  cl2natInstConfigPermitOut BITS
  cl2natInstConfigFixup BITS
  cl2natInstConfigStorageType StorageType
  cl2natInstConfigInstanceRowStatus RowStatus

Cl2natInstIpInstanceIpEntry  
SEQUENCE    
  cl2natInstIpDirection INTEGER
  cl2natInstIpAddressType INTEGER
  cl2natInstIpFromIpAddressType InetAddressType
  cl2natInstIpFromIpAddress InetAddress
  cl2natInstIpToIpAddressType InetAddressType
  cl2natInstIpToIpAddress InetAddress
  cl2natInstIpAddressMask CiscoInetAddressMask
  cl2natInstIpRange Integer32
  cl2natInstStorageIpStorageType StorageType
  cl2natInstIpRowStatus RowStatus

Cl2natInterfaceConfigEntry  
SEQUENCE    
  cl2natInterfaceConfigIfIndex Unsigned32
  cl2natInterfaceConfigVlanIndex Unsigned32
  cl2natInterfaceConfigInstanceName SnmpAdminString
  cl2natInterfaceConfigStorageType StorageType
  cl2natInterfaceConfigRowStatus RowStatus

Cl2natInterfaceStatisticsEntry  
SEQUENCE    
  cl2natFixupArpIn Counter64
  cl2natFixupIcmpIn Counter64
  cl2natFixupCipIn Counter64
  cl2natFixupProfinetIn Counter64
  cl2natFixupFtpIn Counter64
  cl2natFixupSnmpIn Counter64
  cl2natFixupSipIn Counter64
  cl2natFixupSccpIn Counter64
  cl2natUnmatchedIn Counter64
  cl2natTranslatedUnicastIn Counter64
  cl2natDroppedUnicastIn Counter64
  cl2natDroppedMulticastIn Counter64
  cl2natPassThruUnicastIn Counter64
  cl2natPassThruMulticastIn Counter64
  cl2natPassThruIgmpIn Counter64
  cl2natDroppedIgmpIn Counter64
  cl2natFixupArpOut Counter64
  cl2natFixupIcmpOut Counter64
  cl2natFixupCipOut Counter64
  cl2natFixupProfinetOut Counter64
  cl2natFixupFtpOut Counter64
  cl2natFixupSnmpOut Counter64
  cl2natFixupSipOut Counter64
  cl2natFixupSccpOut Counter64
  cl2natUnmatchedOut Counter64
  cl2natDroppedUnicastOut Counter64
  cl2natTranslatedUnicastOut Counter64
  cl2natPassThruUnicastOut Counter64
  cl2natDroppedMulticastOut Counter64
  cl2natPassThruMulticastOut Counter64
  cl2natDroppedIgmpOut Counter64
  cl2natPassThruIgmpOut Counter64

Cl2natInterfaceIpStatisticsEntry  
SEQUENCE    
  cl2natTranslatesIn Counter64
  cl2natTranslatesOut Counter64

Defined Values

ciscoL2natMIB 1.3.6.1.4.1.9.9.806
Network Address Translation (NAT) involves translating the source and or destination IP addresses of packets as they traverse from one IP domain to another. NAT is usually performed on packets that are routed, and there is a MIB already defined for that, but the application addressed here is for performing NAT for Layer 2 switched packets. This MIB module defines objects and tables for Network Address Translation (NAT) performed at layer 2. This application is planned currently for Industrial Ethernet switches, but this could be used for other applications. This platform implements NAT using an FPGA which connects to uplinks, so NAT is only applicable for packets coming in from uplinks, and going out of uplinks. There are 3 main logical modules that are referred in this MIB. Global parameters : These provide statistics for the entire platform. L2NAT Instance Table : This table contains multiple Layer 2 NAT instances. A Layer 2 NAT instance referred throughout this MIB is an entity that is defined with respect to the Layer 2 NAT feature, and is different from the concept of instance as used in SNMP. Each Layer 2 NAT instance has a unique number. Each Layer 2 NAT instance consists of packets that are to be permitted or denied, as well as packets that are supposed to be fixed up. Fixup is a NAT concept which applies to certain applications which embed IP addresses in the payload. For these applications to work across NAT, the embedded IP addresses need to be translated along with the header IP addresses. Each Layer 2 NAT instance also contains a list of source and/or destination IP address translations An instance only becomes effective on traffic after being applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work, cl2natInstanceTable and cl2natInstanceIpTable L2NAT Interface Config Table : This table contains multiple entries, where each entry contains configuration for the instance applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work cl2natInterfaceConfigTable and cl2natInterfaceIpConfigTable. L2NAT Interface Statistics Table : This table contains multiple entries, where each entry contains stats for the instance applied to an interface vlan combination. This table actually consists of these 2 MIB tables in order for indexing to work , cl2natInterfaceStatisticsTable and cl2natInterfaceIpStatisticsTable.
MODULE-IDENTITY    

ciscoL2natMIBObjects 1.3.6.1.4.1.9.9.806.1
OBJECT IDENTIFIER    

cl2natTotalInstances 1.3.6.1.4.1.9.9.806.1.1
This object indicates the total number of Instances defined by the user on this device. Each instance is an independent module of configuration including IP address translations that only becomes active after being applied to an interface/vlan combination.
OBJECT-TYPE    
  Counter32  

cl2natTotalMatched 1.3.6.1.4.1.9.9.806.1.2
This object indicates the number of times a packet matches with user configured IP translation entries. It should be noted that the same packet can be counted twice if it matches both the outside and inside entries, one for the source address translation, and the other for the destination address translation.
OBJECT-TYPE    
  Counter64  

cl2natTotalUnmatched 1.3.6.1.4.1.9.9.806.1.3
This object indicates the total number of packets that did not match any of the configured NAT entries.
OBJECT-TYPE    
  Counter64  

cl2natTotalFixups 1.3.6.1.4.1.9.9.806.1.4
This object indicates the total number of packets that required fixups.
OBJECT-TYPE    
  Counter64  

cl2natTotalTranslationEntryConfigured 1.3.6.1.4.1.9.9.806.1.5
This object specifies the total number IP translation entries currently configured in the system.
OBJECT-TYPE    
  Unsigned32  

cl2natTotalPacketTranslated 1.3.6.1.4.1.9.9.806.1.6
This object indicates the total number of packets that got translated per rules defined in the cl2natinstanceIpTable
OBJECT-TYPE    
  Counter64  

cl2natInstConfigInstanceTable 1.3.6.1.4.1.9.9.806.1.7
This table contains multiple Layer 2 NAT instances. Each Layer 2 NAT instance has a unique name and consists of configurations other than the list of IP NAT translations for which there is a separate table. An instance only becomes effective on traffic after being applied to an interface/vlan combination, which is done through the cl2natInterfaceConfigTable.
OBJECT-TYPE    
  SEQUENCE OF  
    Cl2natInstConfigInstanceEntry

cl2natInstConfigInstanceEntry 1.3.6.1.4.1.9.9.806.1.7.1
This entry is created as a row in the cl2natInstConfigInstanceTable table when a user configures a new instance. Each entry consists of the configuration parameters described below, and is indexed by the Layer 2 NAT instance name.
OBJECT-TYPE    
  Cl2natInstConfigInstanceEntry  

cl2natInstConfigInstanceName 1.3.6.1.4.1.9.9.806.1.7.1.1
This object specifies the Name assigned by user to a created Layer 2 NAT instance.
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

cl2natInstConfigPermitIn 1.3.6.1.4.1.9.9.806.1.7.1.2
This object specifies user configured options for permitting or denying packets coming in from uplinks that do not match any NAT entry (unmatched), IGMP packets, multicast packets. A bit value of 0 denotes drop and a value of 1 indicates permit for that type. Default is 'drop' for all 3 types.
OBJECT-TYPE    
  BITS unmatched(0), igmp(1), multicast(2)  

cl2natInstConfigPermitOut 1.3.6.1.4.1.9.9.806.1.7.1.3
This object specifies user configured options for permitting or denying packets going out of uplinks that do not match any NAT entry (unmatched), IGMP packets, multicast packets. A bit value of 0 denotes drop and a value of 1 indicates permit for that type. Default is drop for all 3 types.
OBJECT-TYPE    
  BITS unmatched(0), igmp(1), multicast(2)  

cl2natInstConfigFixup 0.1.2.3.1.3.6.1.4.1.9.9.806.1.7.1.4
This object specifies user configured options for fixing up ARP, ICMP, Profinet, CIP and SNMP protocols. A fixup is required for protocols which embed IP addresses to work across NAT boundaries, and involves translating any IP address embedded in the protocol payload to the corresponding configured translated address. A bit value of 1 denotes fixup is enabled for that protocol, and a value of 0 indicates fixup is disabled. By default, fixup is enabled for ARP, ICMP, Profinet and CIP (if required).
OBJECT-TYPE    
  BITS arp(0), icmp(1), profinet(2), cip(3), snmp(4)  

cl2natInstConfigStorageType 1.3.6.1.4.1.9.9.806.1.7.1.5
This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns)
OBJECT-TYPE    
  StorageType  

cl2natInstConfigInstanceRowStatus 1.3.6.1.4.1.9.9.806.1.7.1.6
This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cl2natInstIpInstanceName Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry.
OBJECT-TYPE    
  RowStatus  

cl2natInstIpInstanceIpTable 1.3.6.1.4.1.9.9.806.1.8
This table consists of multiple IP entries for each Layer2 NAT instances. This table is a logical extension of the cl2natInstInstanceTable because it is linked to the same Layer 2 NAT instance. This table is required because there can be multiple address translation entries for the same Layer 2 NAT instance.
OBJECT-TYPE    
  SEQUENCE OF  
    Cl2natInstIpInstanceIpEntry

cl2natInstIpInstanceIpEntry 1.3.6.1.4.1.9.9.806.1.8.1
This Entry is created when a new IP translation entry is added for a particular instance.
OBJECT-TYPE    
  Cl2natInstIpInstanceIpEntry  

cl2natInstIpDirection 1.3.6.1.4.1.9.9.806.1.8.1.1
This object specifies the direction in which an address is to be translated. A value of 1 denotes that this entry is for translating source IP address of packets going out of uplinks, or destination IP address of packets coming in. A value of 2 denotes that this entry is for translating destination IP address of packets going out of uplinks, or source IP address of packets coming in.
OBJECT-TYPE    
  INTEGER inside(1), outside(2)  

cl2natInstIpAddressType 1.3.6.1.4.1.9.9.806.1.8.1.2
This object specifies the type of address that is used to configure this translation. 'host' implies that this is a single IP address translation for one host. 'range' implies that the cl2natFromAddress and cl2natToAddress are the starting addresses of the range, and the cl2natIpRange is the number of addresses that are translated with this single config. 'network' implies that an entire class C network of original IP addresses is translated to the corresponding 254 address starting from the cl2natToAddress.
OBJECT-TYPE    
  INTEGER host(1), range(2), network(3)  

cl2natInstIpFromIpAddressType 1.3.6.1.4.1.9.9.806.1.8.1.3
The address type of cl2natFromIpAddress. This object specifies whether this translation is for for IPv4 or IPv6.
OBJECT-TYPE    
  InetAddressType  

cl2natInstIpFromIpAddress 1.3.6.1.4.1.9.9.806.1.8.1.4
This object indicates the source IP address of packets going out of the uplink before translation if the cl2natInstIpDirection value for this entry is inside(1). This objects indicate the destination IP address of packets coming in from the uplinks after translation if the cl2natInstIpDirection value for this entry is outside(2)
OBJECT-TYPE    
  InetAddress Size(4|16)  

cl2natInstIpToIpAddressType 1.3.6.1.4.1.9.9.806.1.8.1.5
The address type of cl2natInstIpToIpAddress. This object specifies whether this translation is for for IPv4 or IPv6.
OBJECT-TYPE    
  InetAddressType  

cl2natInstIpToIpAddress 1.3.6.1.4.1.9.9.806.1.8.1.6
This object indicates the Source IP address of packets going out of the uplink after translation, and destination IP address of packets coming in from the uplinks before translation if the cl2natInstIpDirection value for this entry is inside(1), or the Destination IP address of packets going out of the uplink after translation, and source IP address of packets coming in from the uplinks before translation if the cl2natInstIpDirection value for this entry is outside(2).
OBJECT-TYPE    
  InetAddress Size(4|16)  

cl2natInstIpAddressMask 1.3.6.1.4.1.9.9.806.1.8.1.7
This object specifies the subnet address mask when the value of cl2natInstIpAddressType is 'network'. This is not used for any other option.
OBJECT-TYPE    
  CiscoInetAddressMask  

cl2natInstIpRange 1.3.6.1.4.1.9.9.806.1.8.1.8
This object specifies the number of addresses to be translated in case the value of cl2natIpAddressType is 'range'. This is not used for any other option.
OBJECT-TYPE    
  Integer32 1..128  

cl2natInstStorageIpStorageType 1.3.6.1.4.1.9.9.806.1.8.1.9
This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns)
OBJECT-TYPE    
  StorageType  

cl2natInstIpRowStatus 1.3.6.1.4.1.9.9.806.1.8.1.10
This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': cl2natInstIpDirection cl2natInstIpFromIpAddress cl2natInstIpToIpAddress Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry.
OBJECT-TYPE    
  RowStatus  

cl2natInterfaceConfigTable 1.3.6.1.4.1.9.9.806.1.9
This table contains multiple entries, where each entry contains configuration of the instance applied to an interface/vlan combination.
OBJECT-TYPE    
  SEQUENCE OF  
    Cl2natInterfaceConfigEntry

cl2natInterfaceConfigEntry 1.3.6.1.4.1.9.9.806.1.9.1
Each Entry is created as a row in the cl2natInterfaceConfigTable table when a user applies an instance to an interface/vlan combination, and removed when that instance is removed. A value of 0 in cl2natInterfaceVlanIndex indicates that this attachment is for untagged traffic. The result of this lookup is actually an index that is used to lookup the cl2natInstanceTable which gives the actual config of the instance attached.
OBJECT-TYPE    
  Cl2natInterfaceConfigEntry  

cl2natInterfaceConfigIfIndex 1.3.6.1.4.1.9.9.806.1.9.1.1
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex.
OBJECT-TYPE    
  Unsigned32  

cl2natInterfaceConfigVlanIndex 1.3.6.1.4.1.9.9.806.1.9.1.2
This object indicates the vlan ID the L2NAT instance is attached to. A value of 0 indicates the instance is attached to untagged traffic of the interface.
OBJECT-TYPE    
  Unsigned32  

cl2natInterfaceConfigInstanceName 1.3.6.1.4.1.9.9.806.1.9.1.3
This object indicates the Layer 2 NAT Instance Name to be looked up to retrieve its configuration details. This name corresponds to what's in cl2natInstConfigInstanceName
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

cl2natInterfaceConfigStorageType 1.3.6.1.4.1.9.9.806.1.9.1.4
This object specifies the storage type for this conceptual row. The following columnar objects are allowed to be writable when the storageType of this conceptual row is permanent(4): (replace with list of columns)
OBJECT-TYPE    
  StorageType  

cl2natInterfaceConfigRowStatus 1.3.6.1.4.1.9.9.806.1.9.1.5
This object will follow RowStatus Textual convention to create/destroy entries. The following columnar objects are mandatory to make the entry 'active': ifIndex Once the entry status has been set to active(1), the entry cannot be modified. The only operation possible after this is to delete the entry.
OBJECT-TYPE    
  RowStatus  

cl2natInterfaceStatisticsTable 1.3.6.1.4.1.9.9.806.1.10
This table contains the Layer 2 NAT instance level statistics. The IP address translation statistics are contained in the cl2natInterfaceIpStatisticsTable.
OBJECT-TYPE    
  SEQUENCE OF  
    Cl2natInterfaceStatisticsEntry

cl2natInterfaceStatisticsEntry 1.3.6.1.4.1.9.9.806.1.10.1
This Entry is created as a row in the cl2natInterfaceStatisticsTable table when a user applies an instance to an interface/vlan combination, and removed when that instance is removed.
OBJECT-TYPE    
  Cl2natInterfaceStatisticsEntry  

cl2natFixupArpIn 1.3.6.1.4.1.9.9.806.1.10.1.1
This object indicates the Number of fixed up ARP packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupIcmpIn 1.3.6.1.4.1.9.9.806.1.10.1.2
This object indicates the Number of fixed up ICMP packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupCipIn 1.3.6.1.4.1.9.9.806.1.10.1.3
This object indicates the Number of fixed up CIP packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupProfinetIn 1.3.6.1.4.1.9.9.806.1.10.1.4
This object indicates the Number of fixed up Profinet packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupFtpIn 1.3.6.1.4.1.9.9.806.1.10.1.5
This object indicates the Number of fixed up FTP packets for this Layer 2 NAT Instance coming into the uplinksk.
OBJECT-TYPE    
  Counter64  

cl2natFixupSnmpIn 1.3.6.1.4.1.9.9.806.1.10.1.6
This object indicates the Number of fixed up SNMP packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupSipIn 1.3.6.1.4.1.9.9.806.1.10.1.7
This object indicates the Number of fixed up Sip packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupSccpIn 1.3.6.1.4.1.9.9.806.1.10.1.8
This object indicates the Number of fixed up Sccp packets for this Layer 2 NAT Instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natUnmatchedIn 1.3.6.1.4.1.9.9.806.1.10.1.9
This object indicates the Number of unmatched packets for this Layer 2 NAT Instance coming into the uplinks. 'Unmatched' packets are those that do not match any IP address translation configured for this layer 2 NAT instance.
OBJECT-TYPE    
  Counter64  

cl2natTranslatedUnicastIn 1.3.6.1.4.1.9.9.806.1.10.1.10
This object indicates the Number of translated unicast packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natDroppedUnicastIn 1.3.6.1.4.1.9.9.806.1.10.1.11
This object indicates the Number of Dropped unicast packets for this Layer 2 NAT instance coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natDroppedMulticastIn 1.3.6.1.4.1.9.9.806.1.10.1.12
This object indicates the Number of dropped multicast packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruUnicastIn 1.3.6.1.4.1.9.9.806.1.10.1.13
This object indicates the Number of passed through unicast packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruMulticastIn 1.3.6.1.4.1.9.9.806.1.10.1.14
This object indicates the Number of passed through multicast packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruIgmpIn 1.3.6.1.4.1.9.9.806.1.10.1.15
This object indicates the Number of passed through IGMP packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natDroppedIgmpIn 1.3.6.1.4.1.9.9.806.1.10.1.16
This object indicates the Number of dropped IGMP packets for this Layer 2 NAT coming into the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupArpOut 1.3.6.1.4.1.9.9.806.1.10.1.17
This object indicates the Number of fixed up ARP packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupIcmpOut 1.3.6.1.4.1.9.9.806.1.10.1.18
This object indicates the Number of fixed up ICMP packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupCipOut 1.3.6.1.4.1.9.9.806.1.10.1.19
This object indicates the Number of fixed up CIP packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupProfinetOut 1.3.6.1.4.1.9.9.806.1.10.1.20
This object indicates the Number of fixed up Profinet packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupFtpOut 1.3.6.1.4.1.9.9.806.1.10.1.21
This object indicates the Number of fixed up FTP packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupSnmpOut 1.3.6.1.4.1.9.9.806.1.10.1.22
This object indicates the Number of fixed up SNMP packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupSipOut 1.3.6.1.4.1.9.9.806.1.10.1.23
This object indicates the Number of fixed up Sip packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natFixupSccpOut 1.3.6.1.4.1.9.9.806.1.10.1.24
This object indicates the Number of fixed up Sccp packets for this Layer 2 NAT Instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natUnmatchedOut 1.3.6.1.4.1.9.9.806.1.10.1.25
This object indicates the Number of unmatched packets for this Layer 2 NAT Instance going out of the uplinks. 'Unmatched' packets are those that do not match any IP address translation configured for this layer 2 NAT instance.
OBJECT-TYPE    
  Counter64  

cl2natDroppedUnicastOut 1.3.6.1.4.1.9.9.806.1.10.1.26
This object indicates the Number of Dropped unicast packets for this Layer 2 NAT instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natTranslatedUnicastOut 1.3.6.1.4.1.9.9.806.1.10.1.27
This object indicates the Number of translated unicast packets for this Layer 2 NAT going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruUnicastOut 1.3.6.1.4.1.9.9.806.1.10.1.28
This object indicates the Number of passed through unicast packets for this Layer 2 NAT instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natDroppedMulticastOut 1.3.6.1.4.1.9.9.806.1.10.1.29
This object indicates the Number of dropped multicast packets for this Layer 2 NAT instance going out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruMulticastOut 1.3.6.1.4.1.9.9.806.1.10.1.30
This object indicates the Number of passed through multicast packets for this Layer 2 NAT coming out the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natDroppedIgmpOut 1.3.6.1.4.1.9.9.806.1.10.1.31
This object indicates the Number of dropped IGMP packets for this Layer 2 NAT coming out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natPassThruIgmpOut 1.3.6.1.4.1.9.9.806.1.10.1.32
This object indicates the Number of passed through IGMP packets for this Layer 2 NAT coming out of the uplinks.
OBJECT-TYPE    
  Counter64  

cl2natInterfaceIpStatisticsTable 1.3.6.1.4.1.9.9.806.1.11
This table contains statistics for IP translations of an L2 NAT instance that is applied to interface/vlan combination. This table is a logical extension of the cl2natInterfaceStatisticsTable, because these translations belong to the same instance referred to in that table.
OBJECT-TYPE    
  SEQUENCE OF  
    Cl2natInterfaceIpStatisticsEntry

cl2natInterfaceIpStatisticsEntry 1.3.6.1.4.1.9.9.806.1.11.1
This Entry is created in the cl2natInterfaceIpStatisticsTable for each IP translation of a Layer 2 NAT instance when it is attached to an interface/vlan.
OBJECT-TYPE    
  Cl2natInterfaceIpStatisticsEntry  

cl2natTranslatesIn 1.3.6.1.4.1.9.9.806.1.11.1.1
This entry specifies the number of times this entry was matched for packets going from inside to outside of uplinks.
OBJECT-TYPE    
  Counter64  

cl2natTranslatesOut 1.3.6.1.4.1.9.9.806.1.11.1.2
This entry specifies the number of times this entry was matched for packets coming in from outside of uplinks to inside.
OBJECT-TYPE    
  Counter64  

ciscoL2natMIBConformance 1.3.6.1.4.1.9.9.806.3
OBJECT IDENTIFIER    

ciscoL2natMIBCompliances 1.3.6.1.4.1.9.9.806.3.1
OBJECT IDENTIFIER    

ciscoL2natMIBGroups 1.3.6.1.4.1.9.9.806.3.2
OBJECT IDENTIFIER    

ciscoL2natMIBCompliance 1.3.6.1.4.1.9.9.806.3.1.1
cisco L2NAT mib compliance object
MODULE-COMPLIANCE    

cl2natGlobalStatisticsGroup 1.3.6.1.4.1.9.9.806.3.2.1
A collection of objects providing Global Statistics for NAT at layer 2
OBJECT-GROUP    

cl2natInstanceConfigGroup 1.3.6.1.4.1.9.9.806.3.2.2
A collection of objects providing Instance and interface Config for NAT at layer 2
OBJECT-GROUP    

cl2natInstanceStatisticsGroup 1.3.6.1.4.1.9.9.806.3.2.3
A collection of objects providing per Instance Statistics for NAT at layer 2
OBJECT-GROUP    

cl2natInstanceTranslationStatisticsGroup 1.3.6.1.4.1.9.9.806.3.2.4
A collection of objects providing per Instance per translation statistics at layer 2
OBJECT-GROUP