CISCO-FICON-MIB

File: CISCO-FICON-MIB.mib (93741 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMP-FRAMEWORK-MIB
SNMPv2-CONF IF-MIB CISCO-SMI
CISCO-ST-TC CISCO-VSAN-MIB

Imported symbols

OBJECT-TYPE NOTIFICATION-TYPE MODULE-IDENTITY
Integer32 Counter32 Unsigned32
TruthValue RowStatus DisplayString
TEXTUAL-CONVENTION SnmpAdminString MODULE-COMPLIANCE
OBJECT-GROUP NOTIFICATION-GROUP ifIndex
InterfaceIndex ciscoMgmt FcAddressId
vsanIndex

Defined Types

CficonPortNumOrAddr  
TEXTUAL-CONVENTION    
  current Integer32 0..255

CficonPortSwapEntry  
SEQUENCE    
  cficonPortSwapIndex Integer32
  cficonSwapPortNumberFirst CficonPortNumOrAddr
  cficonSwapPortNumberSecond CficonPortNumOrAddr
  cficonSwapPortEntryStatus RowStatus

CficonVsanEntry  
SEQUENCE    
  cficonVsanHostControl TruthValue
  cficonVsanHostControlSwOffline TruthValue
  cficonVsanHostControlClkAlrtMode TruthValue
  cficonVsanSnmpControl TruthValue
  cficonVsanAutoSavePortAddrCfg TruthValue
  cficonVsanEnableCup TruthValue
  cficonVsanCodePage INTEGER
  cficonVsanCharSet INTEGER
  cficonVsanKeyCounter Integer32
  cficonVsanUserAlertMode TruthValue
  cficonVsanDeviceAllegience INTEGER
  cficonVsanTime DisplayString
  cficonVsanHostOrDefaultTime TruthValue
  cficonVsanCupName SnmpAdminString
  cficonSetHostTimeControl TruthValue
  cficonVsanClearAllegience INTEGER
  cficonVsanEntryStatus RowStatus
  cficonVsanFiconState INTEGER
  cficonVsanSerialNum SnmpAdminString

CficonPortEntry  
SEQUENCE    
  cficonPortAddr CficonPortNumOrAddr
  cficonPortBlock TruthValue
  cficonPortName SnmpAdminString
  cficonProhibitPortNumbers STRING

CficonPortRunCfgEntry  
SEQUENCE    
  cficonPortRunCfgAddr CficonPortNumOrAddr
  cficonPortRunCfgBlock TruthValue
  cficonPortRunCfgName SnmpAdminString
  cficonRunCfgProhibitPrtNums STRING
  cficonRunCfgTypeNumber DisplayString
  cficonRunCfgModelNumber DisplayString
  cficonRunCfgManufacturer DisplayString
  cficonRunCfgPlantOfMfg DisplayString
  cficonRunCfgSerialNumber DisplayString
  cficonRunCfgUnitType INTEGER
  cficonRunCfgPortId Integer32
  cficonRunCfgStatus INTEGER

CficonCfgFileEntry  
SEQUENCE    
  cficonCfgFilename SnmpAdminString
  cficonCfgFileDescr SnmpAdminString
  cficonCfgFileStatus INTEGER
  cficonCfgFileLastUpdated SnmpAdminString
  cficonCfgFileCmd INTEGER
  cficonCfgFileRowStatus RowStatus
  cficonCfgFileCmdStatus INTEGER
  cficonCfgFileCmdErrorString SnmpAdminString

CficonPortNumIfEntry  
SEQUENCE    
  cficonPortNumber CficonPortNumOrAddr
  cficonPortIfIndex InterfaceIndex

CficonPortAddrNumEntry  
SEQUENCE    
  cficonPortAddrPortAddr CficonPortNumOrAddr
  cficonPortAddrPortNumber CficonPortNumOrAddr

CficonPortNumAddrEntry  
SEQUENCE    
  portAddrPortNumber CficonPortNumOrAddr
  portAddress CficonPortNumOrAddr

CficonDirHistEntry  
SEQUENCE    
  cficonDirHistKeyCounter Integer32
  cficonDirHistPortNumbers STRING

CficonStatsEntry  
SEQUENCE    
  cfStatsFramePacingTime Counter32
  cfStatsDispErrorsInFrame Counter32
  cfStatsEOFErrs Counter32
  cfStatsDispErrsOutOfFrame Counter32
  cfStatsInvalidOrderSets Counter32
  cfStatsErrorSummary Counter32

CficonLinkIncidentEntry  
SEQUENCE    
  cficonLinkIncident INTEGER
  cficonLinkIncidentTime DisplayString
  cficonLinkIncidentClear INTEGER

CficonCfgFileCupNameEntry  
SEQUENCE    
  cficonCfgFileCupName SnmpAdminString

CficonConfigCopyEntry  
SEQUENCE    
  cficonConfigCopyIndex Unsigned32
  cficonCopyState INTEGER
  cficonCopyFailReason SnmpAdminString
  cficonCopyEntryRowStatus RowStatus

CficonPortMapEntry  
SEQUENCE    
  cficonPortMapIndex Integer32
  cficonPortMapObj STRING

CficonSlotPortNumEntry  
SEQUENCE    
  cficonSlotIndex Integer32
  cficonSlotReservedPN STRING

CficonRlirErlEntry  
SEQUENCE    
  cficonRlirErlFcId FcAddressId
  cficonRlirErlFormat Unsigned32
  cficonRlirErlRegType INTEGER

CficonInterfaceSwapEntry  
SEQUENCE    
  cficonInterfaceSwapIndex Integer32
  cficonSwapInterfaceIndexFirst InterfaceIndex
  cficonSwapInterfaceIndexSecond InterfaceIndex
  cficonSwapInterfaceActionStatus INTEGER
  cficonSwapInterfaceFailReason INTEGER
  cficonSwapInterfaceSystemError SnmpAdminString
  cficonSwapInterfaceEntryStatus RowStatus

Defined Values

ciscoFiconMIB 1.3.6.1.4.1.9.9.375
This is the FICON (FIber CONnection) MIB module. FICON is an IBM standard of transport mechanism for communication between the mainframes and devices and is a major consideration for enterprise data centers. The Cisco MDS Storage Area Network (SAN) switches provide the functionality of a FICON Director to the customers.
MODULE-IDENTITY    

ciscoFiconMIBNotifications 1.3.6.1.4.1.9.9.375.0
OBJECT IDENTIFIER    

ciscoFiconMIBObjects 1.3.6.1.4.1.9.9.375.1
OBJECT IDENTIFIER    

ciscoFiconMIBConform 1.3.6.1.4.1.9.9.375.2
OBJECT IDENTIFIER    

ciscoFiconConfig 1.3.6.1.4.1.9.9.375.1.1
OBJECT IDENTIFIER    

ciscoFiconGlobal 1.3.6.1.4.1.9.9.375.1.2
OBJECT IDENTIFIER    

cficonDefaultPortBlock 1.3.6.1.4.1.9.9.375.1.2.1
This object indicates the default state which whether to prohibit traffic or allow traffic among all External Ports of a new FICON VSAN. If 'true' the default state is prohibit all traffic, else the default state is allow all traffic. The default values of the cficonProhibitPortNumbers and the cficonRunCfgProhibitPrtNums in a newly created FICON VSAN are consistent with the state of this object.
OBJECT-TYPE    
  TruthValue  

cficonPortSwapTable 1.3.6.1.4.1.9.9.375.1.1.1
A table to issue the port swap command. In FICON, lots of configuration in the host is associated with a port-address. If the FICON port connecting the host to the switch has some problem and the user wants to connect the host to a different port in the switch, one needs to swap the configuration of the two ports. This command transparently swaps the configuration of two ports without affecting the host.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortSwapEntry

cficonPortSwapEntry 1.3.6.1.4.1.9.9.375.1.1.1.1
A cficonPortSwapTable entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. It must also, in the same PDU create the associated instance of the cficonSwapPortNumberFirst and cficonSwapPortNumberSecond objects. Note that when creating a row in this table, the cficonSwapPortEntryStatus, cficonSwapPortNumberFirst and cficonSwapPortNumberSecond are all required. Once the operation completes, the management station should delete the entry.
OBJECT-TYPE    
  CficonPortSwapEntry  

cficonPortSwapIndex 1.3.6.1.4.1.9.9.375.1.1.1.1.1
An arbitrary index for the swap command.
OBJECT-TYPE    
  Integer32 1..2147483647  

cficonSwapPortNumberFirst 1.3.6.1.4.1.9.9.375.1.1.1.1.2
The first port number that needs to be swapped .
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonSwapPortNumberSecond 1.3.6.1.4.1.9.9.375.1.1.1.1.3
The second port number that needs to be swapped.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonSwapPortEntryStatus 1.3.6.1.4.1.9.9.375.1.1.1.1.4
If this object is set to 'createAndGo(4)' then the port configurations of the ports specified by objects cficonSwapPortNumberFirst and cficonSwapPortNumberSecond will be swapped.
OBJECT-TYPE    
  RowStatus  

cficonVsanTable 1.3.6.1.4.1.9.9.375.1.1.2
A table containing the objects to manage FICON functionality in a VSAN.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonVsanEntry

cficonVsanEntry 1.3.6.1.4.1.9.9.375.1.1.2.1
A cficonVsanTable entry. Each entry, identified by vsanIndex, provides the objects to manage FICON functionality in this VSAN, identified by vsanIndex. To create a vsan, only the cficonVsanEntryStatus needs to be set in the PDU. A vsan will be created with default values for all the objects in the entry. Once the vsan is created, the values of all the writable objects within a row can be modified.
OBJECT-TYPE    
  CficonVsanEntry  

cficonVsanHostControl 1.3.6.1.4.1.9.9.375.1.1.2.1.1
The object indicates whether the host is allowed to alter FICON Director connectivity parameters. If 'true' the host is allowed to alter the parameters, else it cannot.
OBJECT-TYPE    
  TruthValue  

cficonVsanHostControlSwOffline 1.3.6.1.4.1.9.9.375.1.1.2.1.2
The object specifying whether the host can put the VSAN offline. If 'true' it allows the host to put the VSAN offline, else it cannot.
OBJECT-TYPE    
  TruthValue  

cficonVsanHostControlClkAlrtMode 1.3.6.1.4.1.9.9.375.1.1.2.1.3
The object indicates whether director clock alert mode is enabled or disabled. If 'true', the mode is enabled, else it is disabled.
OBJECT-TYPE    
  TruthValue  

cficonVsanSnmpControl 1.3.6.1.4.1.9.9.375.1.1.2.1.4
The object indicates whether network management system is allowed to alter FICON director connectivity parameters. If 'true', the network management system is allowed to alter FICON director connectivity parameters, else, it cannot.
OBJECT-TYPE    
  TruthValue  

cficonVsanAutoSavePortAddrCfg 1.3.6.1.4.1.9.9.375.1.1.2.1.5
The object indicating whether the configuration will be saved in the configuration file for this VSAN. When an operator modifies a configuration, the running configuration is modified. If this object is 'true', then the configuration is saved in the configuration file as well. If this object is 'false', then the running configuration is not saved in the configuration file.
OBJECT-TYPE    
  TruthValue  

cficonVsanEnableCup 1.3.6.1.4.1.9.9.375.1.1.2.1.6
The object indicating Control Unit Port (CUP) is enabled. If 'true', CUP is enabled, else it is disabled.
OBJECT-TYPE    
  TruthValue  

cficonVsanCodePage 1.3.6.1.4.1.9.9.375.1.1.2.1.7
The EBCDIC Code page used for the exchange of information with the host in this VSAN.
OBJECT-TYPE    
  INTEGER usa(37), germany(273), brazil(275), italy(280), japan(281), spain(284), uk(285), france(297), interNational(500)  

cficonVsanCharSet 1.3.6.1.4.1.9.9.375.1.1.2.1.8
The Character Set used for the exchange of of information with the host in this VSAN.
OBJECT-TYPE    
  INTEGER charSet697(1)  

cficonVsanKeyCounter 1.3.6.1.4.1.9.9.375.1.1.2.1.9
A counter that is incremented every time there is a configuration change. This counter is used by the Host to keep track of the number of configuration changes that have taken place.
OBJECT-TYPE    
  Integer32 1..2147483647  

cficonVsanUserAlertMode 1.3.6.1.4.1.9.9.375.1.1.2.1.10
The object indicating whether director user alert mode is enabled or disabled. If 'true', the mode is enabled. else it is disabled.
OBJECT-TYPE    
  TruthValue  

cficonVsanDeviceAllegience 1.3.6.1.4.1.9.9.375.1.1.2.1.11
The object indicating whether CUP is in a allegiance state. If it is in allegiance state with a channel, it cannot accept any commands from any logical paths. A CUP goes in an allegiance state when it accepts command from a channel and forms 'an allegiance' with it until the successful completion of the channel program, at which point the CUP goes in a an 'unlocked' mode.
OBJECT-TYPE    
  INTEGER lockedByCLI(1), lockedBySnmp(2), lockedByHost(3), unlocked(4)  

cficonVsanTime 1.3.6.1.4.1.9.9.375.1.1.2.1.12
The system time in the VSAN. This could be set either by the host or be the default global time in the FICON Director. The default global time is the local time in the FICON Director. The format is as follows - Wed Nov 5 18:53:52.172485 2003
OBJECT-TYPE    
  DisplayString  

cficonVsanHostOrDefaultTime 1.3.6.1.4.1.9.9.375.1.1.2.1.13
The object indicating whether VSAN time is set by the host or the time is global time within a FICON Director. If 'true', the time was set by the host, else it is same as the FICON Director's global time.
OBJECT-TYPE    
  TruthValue  

cficonVsanCupName 1.3.6.1.4.1.9.9.375.1.1.2.1.14
The name of CUP.
OBJECT-TYPE    
  SnmpAdminString  

cficonSetHostTimeControl 1.3.6.1.4.1.9.9.375.1.1.2.1.15
The object indicating whether VSAN time can be set by the host. If 'true', the host can set the time, else it can not.
OBJECT-TYPE    
  TruthValue  

cficonVsanClearAllegience 1.3.6.1.4.1.9.9.375.1.1.2.1.16
The object used to clear a CUP allegiance. If this object is set with value, 'clear(1)' the CUP goes in a 'non-allegiance' or 'unlocked' mode as described in the description of cficonVsanDeviceAllegience object above.
OBJECT-TYPE    
  INTEGER clear(1)  

cficonVsanEntryStatus 1.3.6.1.4.1.9.9.375.1.1.2.1.17
The status of this table entry.
OBJECT-TYPE    
  RowStatus  

cficonVsanFiconState 1.3.6.1.4.1.9.9.375.1.1.2.1.18
The object used to control the state of the ports belonging to a vsan in the context of the FICON functionality. If this object is set to 'offline(1)' all the ports belonging to the vsan, specified by the vsanIndex are put in the suspended state. If this object is set to 'online(2)' all the ports belonging to the vsan, specified by the vsanIndex are put in the operational state.
OBJECT-TYPE    
  INTEGER offline(1), online(2)  

cficonVsanSerialNum 1.3.6.1.4.1.9.9.375.1.1.2.1.19
The serial number of the FICON director.
OBJECT-TYPE    
  SnmpAdminString  

cficonPortTable 1.3.6.1.4.1.9.9.375.1.1.3
A table listing the port information as stored in the configuration file.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortEntry

cficonPortEntry 1.3.6.1.4.1.9.9.375.1.1.3.1
A cficonPortTable entry. Each entry provides the information about a port, identified by cficonPortAddr, in the configuration file, identified by cficonPortFilename, on this VSAN, identified by vsanIndex.
OBJECT-TYPE    
  CficonPortEntry  

cficonPortAddr 1.3.6.1.4.1.9.9.375.1.1.3.1.1
The Port Address of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonPortBlock 1.3.6.1.4.1.9.9.375.1.1.3.1.2
The object indicates whether to block or unblock this port. This is one of the port-connectivity parameters. If 'true' this port is blocked, else it is unblocked.
OBJECT-TYPE    
  TruthValue  

cficonPortName 1.3.6.1.4.1.9.9.375.1.1.3.1.3
The name of this port.
OBJECT-TYPE    
  SnmpAdminString  

cficonProhibitPortNumbers 1.3.6.1.4.1.9.9.375.1.1.3.1.4
The list of ports that will be prohibited from communication. Each octet within the value of an object of this type, specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port.
OBJECT-TYPE    
  STRING Size(32)  

cficonPortRunCfgTable 1.3.6.1.4.1.9.9.375.1.1.4
A table listing the port information as stored in the running configuration. Each port is identified by the port address in the context of its vsan Index.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortRunCfgEntry

cficonPortRunCfgEntry 1.3.6.1.4.1.9.9.375.1.1.4.1
A cficonPortRunCfgTable entry. Each entry provides the information about a port (identified by cficonPortAddr), on this VSAN (identified by vsanIndex), for the running configuration.
OBJECT-TYPE    
  CficonPortRunCfgEntry  

cficonPortRunCfgAddr 1.3.6.1.4.1.9.9.375.1.1.4.1.1
The address of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonPortRunCfgBlock 1.3.6.1.4.1.9.9.375.1.1.4.1.2
The object indicating whether to block or unblock this port. If 'true' this port is blocked, else it is unblocked.
OBJECT-TYPE    
  TruthValue  

cficonPortRunCfgName 1.3.6.1.4.1.9.9.375.1.1.4.1.3
The port name of this port.
OBJECT-TYPE    
  SnmpAdminString  

cficonRunCfgProhibitPrtNums 1.3.6.1.4.1.9.9.375.1.1.4.1.4
The list of ports that will be prohibited. Each octet within the value of an object of this type specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port.
OBJECT-TYPE    
  STRING Size(256)  

cficonRunCfgTypeNumber 1.3.6.1.4.1.9.9.375.1.1.4.1.5
The type number for this FICON Director.
OBJECT-TYPE    
  DisplayString Size(1..16)  

cficonRunCfgModelNumber 1.3.6.1.4.1.9.9.375.1.1.4.1.6
The model number for this FICON Director. It is in the form of ASCII characters.
OBJECT-TYPE    
  DisplayString Size(1..16)  

cficonRunCfgManufacturer 1.3.6.1.4.1.9.9.375.1.1.4.1.7
The name of the the company that manufactured this FICON Director.
OBJECT-TYPE    
  DisplayString Size(1..16)  

cficonRunCfgPlantOfMfg 1.3.6.1.4.1.9.9.375.1.1.4.1.8
The plant code that identifies the plant of manufacture of this FICON Director.
OBJECT-TYPE    
  DisplayString Size(1..16)  

cficonRunCfgSerialNumber 1.3.6.1.4.1.9.9.375.1.1.4.1.9
The sequence number assigned to this FICON Director during manufacturing.
OBJECT-TYPE    
  DisplayString Size(1..16)  

cficonRunCfgUnitType 1.3.6.1.4.1.9.9.375.1.1.4.1.10
The peer type of the port that this port is communicating. channel - Host controlUnit - Disk fabric - Another SAN switch
OBJECT-TYPE    
  INTEGER channel(1), controlUnit(2), fabric(3), unknown(4)  

cficonRunCfgPortId 1.3.6.1.4.1.9.9.375.1.1.4.1.11
This is the identifier of the peer port. If the peer port is channel, as described by the instance of cficonRunCfgUnitType, then cficonRunCfgPortId will be the CHPID (Channel Path Identifier) of the channel path that contains this peer port. If the peer port is controlUnit, then cficonRunCfgPortId will be 0. If the peer port is fabric, then cficonRunCfgPortId will be port address of the interface on the peer switch.
OBJECT-TYPE    
  Integer32 0..255  

cficonRunCfgStatus 1.3.6.1.4.1.9.9.375.1.1.4.1.12
This object specifies the status of the row, whether some specific columns in this row are valid, invalid or old. These specific columns are - cficonRunCfgProhibitPrtNums, cficonRunCfgTypeNumber, cficonRunCfgModelNumber, cficonRunCfgManufacturer, cficonRunCfgPlantOfMfg, cficonRunCfgSerialNumber and cficonRunCfgUnitType. The only value that can be assigned by the Network Management System(NMS) is 'invalid'. The NMS cannot set this object to any other value (i.e 'valid' or 'old'). valid - The information ( values of the other columns) is guaranteed to be correct. old - The information was valid before the port went down. Although the information has not vanished, it cannot be guaranteed. invalid - When the port does not have the information at all. (i.e. when the port comes up for the first time or the NMS clears the information.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2), old(3)  

cficonCfgFileTable 1.3.6.1.4.1.9.9.375.1.1.5
A table listing the configuration files for each vsan.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonCfgFileEntry

cficonCfgFileEntry 1.3.6.1.4.1.9.9.375.1.1.5.1
A cficonCfgFileTable entry. Each entry provides the configuration file for a vsan (identified by vsanIndex) and a file (identified by cficonCfgFilename). Each entry lists the file status, the time the file was last updated etc. The cficonCfgFileRowStatus object is used to create or delete a configuration file. For creation or deletion, only the cficonCfgFileRowStatus object needs to be set in the PDU. cficonCfgFileCmd object is used to apply this configuration file to the vsan specified by the vsanIndex. For example, To create a configuration file 'cfg' for vsan 1, the management application must do the following - cficonCfgFileRowStatus.1.cfg = createAndGo; To delete the configuration file, cficonCfgFileRowStatus.1.cfg = destroy; To apply this configuration file, cficonCfgFileCmd.1.cfg = apply;
OBJECT-TYPE    
  CficonCfgFileEntry  

cficonCfgFilename 1.3.6.1.4.1.9.9.375.1.1.5.1.1
The name of the configuration file.
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

cficonCfgFileDescr 1.3.6.1.4.1.9.9.375.1.1.5.1.2
The description of the configuration file.
OBJECT-TYPE    
  SnmpAdminString Size(1..64)  

cficonCfgFileStatus 1.3.6.1.4.1.9.9.375.1.1.5.1.3
The status of filename containing these ports. Network Management station must check this object before it can read the contents of the configuration file. If it is 'locked', it means that the host or the CLI or the network management station is in the process of writing the contents of this file. If it is 'locked' the the file cannot be read. If it is 'unlocked', then the file is ready to be read.
OBJECT-TYPE    
  INTEGER locked(1), unlocked(2)  

cficonCfgFileLastUpdated 1.3.6.1.4.1.9.9.375.1.1.5.1.4
The time this file was last updated. The format is as follows - Wed Nov 5 18:53:52.172485 2003
OBJECT-TYPE    
  SnmpAdminString  

cficonCfgFileCmd 1.3.6.1.4.1.9.9.375.1.1.5.1.5
The object to apply this configuration file to the VSAN identified by the vsanIndex. When reading this object, a noOp(2) is returned. open(3) opens this file for modifying. close(4) closes this file.
OBJECT-TYPE    
  INTEGER apply(1), noOp(2), open(3), close(4)  

cficonCfgFileRowStatus 1.3.6.1.4.1.9.9.375.1.1.5.1.6
The rowStatus of this row.
OBJECT-TYPE    
  RowStatus  

cficonCfgFileCmdStatus 1.3.6.1.4.1.9.9.375.1.1.5.1.7
The object to describe the status of the last 'apply' command. success - The last apply command was successful. inProgress - The last apply command is still in the process of execution. failed - The last apply command failed. notApplicable - The last apply command status is not available.
OBJECT-TYPE    
  INTEGER success(1), inProgress(2), failed(3), notApplicable(4)  

cficonCfgFileCmdErrorString 1.3.6.1.4.1.9.9.375.1.1.5.1.8
The string describing the reason the the last 'apply' command failed. This string needs to be polled only in the case when the value of the cficonCfgFileCmdStatus is 'failed'.
OBJECT-TYPE    
  SnmpAdminString Size(1..128)  

cficonPortNumIfTable 1.3.6.1.4.1.9.9.375.1.1.6
A table listing the association of Port number to its interface index.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortNumIfEntry

cficonPortNumIfEntry 1.3.6.1.4.1.9.9.375.1.1.6.1
A cficonPortNumIfTable entry. Each entry provides a mapping between the port number and its interface index.
OBJECT-TYPE    
  CficonPortNumIfEntry  

cficonPortNumber 1.3.6.1.4.1.9.9.375.1.1.6.1.1
The port number of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonPortIfIndex 1.3.6.1.4.1.9.9.375.1.1.6.1.2
The interface index of this port. For ports that are not installed, this object would be zero.
OBJECT-TYPE    
  InterfaceIndex  

cficonPortAddrNumTable 1.3.6.1.4.1.9.9.375.1.1.7
A table listing the association of Port address to port number.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortAddrNumEntry

cficonPortAddrNumEntry 1.3.6.1.4.1.9.9.375.1.1.7.1
A cficonPortAddrNumTable entry. Each entry provides the port address to port number mapping.
OBJECT-TYPE    
  CficonPortAddrNumEntry  

cficonPortAddrPortAddr 1.3.6.1.4.1.9.9.375.1.1.7.1.1
The port address of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonPortAddrPortNumber 1.3.6.1.4.1.9.9.375.1.1.7.1.2
The port number of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonPortNumAddrTable 1.3.6.1.4.1.9.9.375.1.1.8
A table listing the association of Port number to its port number.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortNumAddrEntry

cficonPortNumAddrEntry 1.3.6.1.4.1.9.9.375.1.1.8.1
A cficonPortNumAddrTable entry. Each entry provides a mapping between the port number and its port number.
OBJECT-TYPE    
  CficonPortNumAddrEntry  

portAddrPortNumber 1.3.6.1.4.1.9.9.375.1.1.8.1.1
The port number of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

portAddress 1.3.6.1.4.1.9.9.375.1.1.8.1.2
The port address of this port.
OBJECT-TYPE    
  CficonPortNumOrAddr  

cficonDirHistTable 1.3.6.1.4.1.9.9.375.1.1.9
A table listing the director history buffer. Director History Buffer is a mechanism to determine those ports that have changed their configuration for a particular value of a key counter. The FICON Director maintains a change vector of 256 bits (32 bytes) and an associated key counter. This table lists this vector for a given key counter.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonDirHistEntry

cficonDirHistEntry 1.3.6.1.4.1.9.9.375.1.1.9.1
A row in the cficonDirHistTable, identified by the vsanIndex and the key counter.
OBJECT-TYPE    
  CficonDirHistEntry  

cficonDirHistKeyCounter 1.3.6.1.4.1.9.9.375.1.1.9.1.1
The key counter.
OBJECT-TYPE    
  Integer32 1..2147483647  

cficonDirHistPortNumbers 1.3.6.1.4.1.9.9.375.1.1.9.1.2
The list of ports that have configuration change for a value of cficonDirHistKeyCounter. If a port has configuration change, its bit position will be 1. Each octet within the value of an object of this type, specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port and the least significant bit represents the highest numbered port.
OBJECT-TYPE    
  STRING Size(32)  

cficonStatsTable 1.3.6.1.4.1.9.9.375.1.1.10
A table listing the FICON Statistics .
OBJECT-TYPE    
  SEQUENCE OF  
    CficonStatsEntry

cficonStatsEntry 1.3.6.1.4.1.9.9.375.1.1.10.1
An entry listing the FICON statistics for FICON port.
OBJECT-TYPE    
  CficonStatsEntry  

cfStatsFramePacingTime 1.3.6.1.4.1.9.9.375.1.1.10.1.1
Number of 2.5 microsecond units that frame transmission is blocked due to zero credit.
OBJECT-TYPE    
  Counter32  

cfStatsDispErrorsInFrame 1.3.6.1.4.1.9.9.375.1.1.10.1.2
Number of frames with disparity errors.
OBJECT-TYPE    
  Counter32  

cfStatsEOFErrs 1.3.6.1.4.1.9.9.375.1.1.10.1.3
Number of frames with EOF errors.
OBJECT-TYPE    
  Counter32  

cfStatsDispErrsOutOfFrame 1.3.6.1.4.1.9.9.375.1.1.10.1.4
Number of frames with OOF errors.
OBJECT-TYPE    
  Counter32  

cfStatsInvalidOrderSets 1.3.6.1.4.1.9.9.375.1.1.10.1.5
Number of invalid or unrecognizable Order Sets outside of frames.
OBJECT-TYPE    
  Counter32  

cfStatsErrorSummary 1.3.6.1.4.1.9.9.375.1.1.10.1.6
This counter contains a sum of the errors counted by a set of the other defined error counters.
OBJECT-TYPE    
  Counter32  

cficonShowPorts 1.3.6.1.4.1.9.9.375.1.1.11
An object to control which ports are displayed. If set to all(1), all the ports, regardless whether they are installed or not are displayed in the cficonPortTable and cificonPortRunCfgTable. If set to 'installed', only the ports that are installed ports are displayed in the cficonPortTable and cificonPortRunCfgTable.
OBJECT-TYPE    
  INTEGER all(1), installed(2)  

cficonLinkIncidentTable 1.3.6.1.4.1.9.9.375.1.1.12
A table listing the link incidents in a FICON interface. A Link incident is an event when the interface experiences the conditions described in the cficonLinkIncident object.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonLinkIncidentEntry

cficonLinkIncidentEntry 1.3.6.1.4.1.9.9.375.1.1.12.1
An entry listing the cficonLinkIncidentTable.
OBJECT-TYPE    
  CficonLinkIncidentEntry  

cficonLinkIncident 1.3.6.1.4.1.9.9.375.1.1.12.1.1
The type of link incident that occurred on an interface. bitErrThreshExceeded - Bit Error Threshold exceeded. lossOfSignalOrSync - Loss of Signal or Sync message. nosReceived - NOS msg Received NOS - Non Operational State primitiveSeqTimeOut - Primitive Timeout invalidPrimitiveSeq - Invalid Primitive sequence
OBJECT-TYPE    
  INTEGER none(1), bitErrThreshExceeded(2), lossOfSignalOrSync(3), nosReceived(4), primitiveSeqTimeOut(5), invalidPrimitiveSeq(6)  

cficonLinkIncidentTime 1.3.6.1.4.1.9.9.375.1.1.12.1.2
The time at which the link incident happened. The format is as follows - Wed Nov 5 18:53:52.172485 2003
OBJECT-TYPE    
  DisplayString Size(1..32)  

cficonLinkIncidentClear 1.3.6.1.4.1.9.9.375.1.1.12.1.3
The object used to clear the link incident for an interface.
OBJECT-TYPE    
  INTEGER clear(1)  

cficonCfgFileCupNameTable 1.3.6.1.4.1.9.9.375.1.1.13
A table listing the CUP names for each vsan in a configuration file.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonCfgFileCupNameEntry

cficonCfgFileCupNameEntry 1.3.6.1.4.1.9.9.375.1.1.13.1
A cficonCfgFileCupNameTable entry. Each entry provides the CUP name for a VSAN (identified by vsanIndex) and a file (identified by cficonCfgFilename).
OBJECT-TYPE    
  CficonCfgFileCupNameEntry  

cficonCfgFileCupName 1.3.6.1.4.1.9.9.375.1.1.13.1.1
The name of CUP.
OBJECT-TYPE    
  SnmpAdminString Size(1..24)  

cficonConfigCopyTable 1.3.6.1.4.1.9.9.375.1.1.14
A table of config-copy requests.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonConfigCopyEntry

cficonConfigCopyEntry 1.3.6.1.4.1.9.9.375.1.1.14.1
A config-copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse table. The station should then create the associated instance of the row status object. This config-copy operation is only to copy the running configuration to startup configuration for FICON. Once the appropriate instance of all the configuration objects have been created, either by an explicit SNMP set request or by default, the row status should be set to active to initiate the request. Note that this entire procedure may be initiated via a single set request which specifies a row status of createAndGo. Once the config-copy request has been created (i.e. the cfCopyEntryRowStatus has been made active), the entry cannot be modified - the only operation possible after this is to delete the row. Once the request completes, the management station should retrieve the value of the status object and should then delete the entry. In order to prevent old entries from clogging the table, entries will be aged out, but an entry will never be deleted within 5 minutes of completing.
OBJECT-TYPE    
  CficonConfigCopyEntry  

cficonConfigCopyIndex 1.3.6.1.4.1.9.9.375.1.1.14.1.1
Object which specifies a unique entry in the cficonConfigCopyTable. A management station wishing to initiate a config-copy operation should use a random value for this object when creating an instance of a cficonConfigCopyEntry.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

cficonCopyState 1.3.6.1.4.1.9.9.375.1.1.14.1.2
Specifies the result of this config-copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the cficonCopyEntryRowStatus has been made active.
OBJECT-TYPE    
  INTEGER inProgress(1), success(2), failed(3)  

cficonCopyFailReason 1.3.6.1.4.1.9.9.375.1.1.14.1.3
An error string describing the reason the copy failed.
OBJECT-TYPE    
  SnmpAdminString  

cficonCopyEntryRowStatus 1.3.6.1.4.1.9.9.375.1.1.14.1.4
The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (cficonCopyState transitions to successful or failed state).
OBJECT-TYPE    
  RowStatus  

cficonAutoSaveState 1.3.6.1.4.1.9.9.375.1.1.15
The object indicates whether auto save state is enabled or disabled. Enabling the auto save state, saves the configuration to the configuration file whenever a configuration change is made. If the cficonAutoSaveState is disabled (false), the configuration change is not saved to the configuration file.
OBJECT-TYPE    
  TruthValue  

ciscoFiconPortMap 1.3.6.1.4.1.9.9.375.1.1.16
OBJECT IDENTIFIER    

cficonPortMap1 1.3.6.1.4.1.9.9.375.1.1.16.1
The port map1. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMap2 1.3.6.1.4.1.9.9.375.1.1.16.2
The port map2. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMap3 1.3.6.1.4.1.9.9.375.1.1.16.3
The port map3. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMap4 1.3.6.1.4.1.9.9.375.1.1.16.4
The port map4. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMap5 1.3.6.1.4.1.9.9.375.1.1.16.5
The port map5. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMap6 1.3.6.1.4.1.9.9.375.1.1.16.6
The port map6. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 6 bytes long and there can be up to 42 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type
OBJECT-TYPE    
  STRING Size(0..255)  

cficonPortMapMax 1.3.6.1.4.1.9.9.375.1.1.16.7
Number of port map objects.
OBJECT-TYPE    
  Integer32 1..100  

cficonPortMapTable 1.3.6.1.4.1.9.9.375.1.1.16.8
The port map table. This table contains the list of port map objects to carry the information of IfIndex, port Address, unit Type and Port Number for all ports.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonPortMapEntry

cficonPortMapEntry 1.3.6.1.4.1.9.9.375.1.1.16.8.1
The port map entry. This entry consists of a index number indicating a set of ports and a port map object carrying certain port attributes for these ports.
OBJECT-TYPE    
  CficonPortMapEntry  

cficonPortMapIndex 1.3.6.1.4.1.9.9.375.1.1.16.8.1.1
The port map index. This number indicates the group of ports described by the port map object.
OBJECT-TYPE    
  Integer32 1..100  

cficonPortMapObj 1.3.6.1.4.1.9.9.375.1.1.16.8.1.2
The port map object. This object contains information specific to third party vendor and the usage is vendor specific. Each record is 7 bytes long and there can be up to 36 records in this object. Each record consists of the following - 0-3 bytes - IfIndex byte 4 - Port Address byte 5 - Unit Type byte 6 - Port Number
OBJECT-TYPE    
  STRING Size(0..255)  

cficonSlotPortNumTable 1.3.6.1.4.1.9.9.375.1.1.17
Chassis slot port number table. This table contains the list of all reserved port numbers for all slots of the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonSlotPortNumEntry

cficonSlotPortNumEntry 1.3.6.1.4.1.9.9.375.1.1.17.1
Chassis slot port number entry. This entry has the slot number and reserved port numbers for this slot.
OBJECT-TYPE    
  CficonSlotPortNumEntry  

cficonSlotIndex 1.3.6.1.4.1.9.9.375.1.1.17.1.1
The chassis slot number.
OBJECT-TYPE    
  Integer32 1..32  

cficonSlotReservedPN 1.3.6.1.4.1.9.9.375.1.1.17.1.2
Chassis slot port numbers. Reserved port numbers for one chassis slot. There can be up to 64 port numbers reserved for each slot in the chassis.
OBJECT-TYPE    
  STRING Size(0..64)  

cficonLogicReservedPN 1.3.6.1.4.1.9.9.375.1.1.18
Reserved port numbers for logical ports. There can be up to 256 port numbers reserved for logical ports.
OBJECT-TYPE    
  STRING Size(0..256)  

cficonRlirErlTable 1.3.6.1.4.1.9.9.375.1.1.19
A table of Nx_Ports that have registered to receive RLIRs on all VSANs on the local switch.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonRlirErlEntry

cficonRlirErlEntry 1.3.6.1.4.1.9.9.375.1.1.19.1
An entry (conceptual row) containing information about an Nx_Port which has registered to receive RLIRs on the VSAN indicated by vsanIndex.
OBJECT-TYPE    
  CficonRlirErlEntry  

cficonRlirErlFcId 1.3.6.1.4.1.9.9.375.1.1.19.1.1
The Fibre Channel Identifier (FC-ID) of the subscribing Nx_Port.
OBJECT-TYPE    
  FcAddressId  

cficonRlirErlFormat 1.3.6.1.4.1.9.9.375.1.1.19.1.2
Indicates the device type for which the Nx_Port is interested in receiving RLIR ELS.
OBJECT-TYPE    
  Unsigned32 0..255  

cficonRlirErlRegType 1.3.6.1.4.1.9.9.375.1.1.19.1.3
This object indicates the type of registration desired by the subscriber. conditionalRx(1) - the Nx_Port is registered as a valid recipient of subsequent RLIRs. But such an Nx_Port is chosen as the recipient of a link incident record only if no other recipients from the ERL on this VSAN have been chosen. alwaysRx(2) - the Nx_Port is registered as a valid recipient of subsequent RLIRs. Such an Nx_Port is always chosen as a recipient of a link incident record.
OBJECT-TYPE    
  INTEGER conditionalRx(1), alwaysRx(2)  

cficonInterfaceSwapNextIndex 1.3.6.1.4.1.9.9.375.1.1.21
Next unique index available for creating new entry in the FICON interface swap table.
OBJECT-TYPE    
  Integer32 1..2147483647  

cficonInterfaceSwapTable 1.3.6.1.4.1.9.9.375.1.1.20
This table provides a management application with the capability to swap the configuration of two specified interfaces. In FICON, a host associates a great deal of configuration data with a port-address. If the FICON port connecting the host to the switch has some problem and the user wants to connect the host to a different port in the switch, one needs to swap the configuration of the two ports. This command transparently swaps the configuration of two ports without affecting the host.
OBJECT-TYPE    
  SEQUENCE OF  
    CficonInterfaceSwapEntry

cficonInterfaceSwapEntry 1.3.6.1.4.1.9.9.375.1.1.20.1
A cficonInterfaceSwapTable entry contains 2 interface indices to be swapped among other objects. A management station wishing to create an entry should first obtain a unique serial number, e.g. get the cficonInterfaceSwapNextIndex scalar as the index to this sparse table. The station should then create the associated instance of the row status object. Note that when creating a row in this table, the cficonSwapPortEntryStatus, cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond are all required. The values of cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond should be different. If for any reason the new row can not be created, no swap action will be performed. If the table entry creation is successful, the value of cficonSwapInterfaceActionStatus will be pending(1) first and the SNMP response will be returned as success. When the swap starts, the value will be executing(2). After the swap action is done, the value will be either success(3) or failure(4). cficonSwapInterfaceFailReason contains the failure reason to indicate where the failure is from. cficonSwapInterfaceSystemError is a user readable description given by the failure causing sub-module. The management station should delete the entry after the value of cficonSwapInterfaceActionStatus being either success(3) or failure(4).
OBJECT-TYPE    
  CficonInterfaceSwapEntry  

cficonInterfaceSwapIndex 1.3.6.1.4.1.9.9.375.1.1.20.1.1
An arbitrary index for the swap command.
OBJECT-TYPE    
  Integer32 1..2147483647  

cficonSwapInterfaceIndexFirst 1.3.6.1.4.1.9.9.375.1.1.20.1.2
The first port number that needs to be swapped .
OBJECT-TYPE    
  InterfaceIndex  

cficonSwapInterfaceIndexSecond 1.3.6.1.4.1.9.9.375.1.1.20.1.3
The second port number that needs to be swapped.
OBJECT-TYPE    
  InterfaceIndex  

cficonSwapInterfaceActionStatus 1.3.6.1.4.1.9.9.375.1.1.20.1.4
The status of the port swap request. pending - the request is waiting to be processed by the device. executing - the request is currently being processed by the device. success - the request has been completed successfully by the device. failure - the request failed.
OBJECT-TYPE    
  INTEGER pending(1), executing(2), success(3), failure(4)  

cficonSwapInterfaceFailReason 1.3.6.1.4.1.9.9.375.1.1.20.1.5
The reason of failed port swap request other - the failure is caused by other sub-module. none - no failure. dmFailure - the failure is caused by Domain Manager. ficonFailure - the failure is caused by FICON Manager. pmFailure - the failure is caused by Port Manager. psmFailure - the failure is caused by Port Security Manager. qosFailure - the failure is caused by QOS sub-module. spanFailure - the failure is caused by SPAN sub-module. zsFailure - the failure is caused by Zone Server.
OBJECT-TYPE    
  INTEGER other(1), none(2), dmFailure(3), ficonFailure(4), pmFailure(5), psmFailure(6), qosFailure(7), spanFailure(8), zsFailure(9)  

cficonSwapInterfaceSystemError 1.3.6.1.4.1.9.9.375.1.1.20.1.6
A system error string readable by user for the failed swap action.
OBJECT-TYPE    
  SnmpAdminString  

cficonSwapInterfaceEntryStatus 1.3.6.1.4.1.9.9.375.1.1.20.1.7
If this object is set to 'active(1)' then the port configurations of the ports specified by objects cficonSwapInterfaceIndexFirst and cficonSwapInterfaceIndexSecond will be swapped.
OBJECT-TYPE    
  RowStatus  

cficonPortInfoChange 1.3.6.1.4.1.9.9.375.0.1
A FICON Port Change notification is generated whenever the unit type of the port changes.
NOTIFICATION-TYPE    

ciscoFiconCompliances 1.3.6.1.4.1.9.9.375.2.1
OBJECT IDENTIFIER    

ciscoFiconGroups 1.3.6.1.4.1.9.9.375.2.2
OBJECT IDENTIFIER    

ciscoFiconCompliance 1.3.6.1.4.1.9.9.375.2.1.1
Write access is not required.
MODULE-COMPLIANCE    
  cficonVsanEntryStatus INTEGER active(1), createAndGo(4), destroy(6)

ciscoFiconComplianceRev1 1.3.6.1.4.1.9.9.375.2.1.2
Write access is not required.
MODULE-COMPLIANCE    
  cficonVsanEntryStatus INTEGER active(1), createAndGo(4), destroy(6)

ciscoFiconComplianceRev2 1.3.6.1.4.1.9.9.375.2.1.3
Write access is not required.
MODULE-COMPLIANCE    
  cficonVsanEntryStatus INTEGER active(1), createAndGo(4), destroy(6)

ciscoFiconComplianceRev3 1.3.6.1.4.1.9.9.375.2.1.4
Write access is not required.
MODULE-COMPLIANCE    
  cficonVsanEntryStatus INTEGER active(1), createAndGo(4), destroy(6)

cficonPortSwapGroup 1.3.6.1.4.1.9.9.375.2.2.1
A collection of objects providing port swap functionality.
OBJECT-GROUP    

cficonVsanGroup 1.3.6.1.4.1.9.9.375.2.2.2
A group containing objects providing ficon information in a vsan.
OBJECT-GROUP    

cficonPortGroup 1.3.6.1.4.1.9.9.375.2.2.3
A group containing an object providing ficon port information.
OBJECT-GROUP    

cficonPortRunCfgGroup 1.3.6.1.4.1.9.9.375.2.2.4
A group containing an object providing ficon port information.
OBJECT-GROUP    

cficonCfgFileGroup 1.3.6.1.4.1.9.9.375.2.2.5
A collection of objects for the per VSAN config file table.
OBJECT-GROUP    

cficonPortNumIfGroup 1.3.6.1.4.1.9.9.375.2.2.6
A collection of objects giving association of a Port Number to Interface Index of the Port.
OBJECT-GROUP    

cficonPortAddrNumGroup 1.3.6.1.4.1.9.9.375.2.2.7
A collection of objects giving association of a port address to port number and interface index of the port.
OBJECT-GROUP    

cficonPortNumAddrGroup 1.3.6.1.4.1.9.9.375.2.2.8
A collection of objects for the port number to port Address translation table.
OBJECT-GROUP    

cficonDirHistGroup 1.3.6.1.4.1.9.9.375.2.2.9
A collection of objects for the Director History table.
OBJECT-GROUP    

cficonStatsGroup 1.3.6.1.4.1.9.9.375.2.2.10
A collection of objects for the FICON statistics table.
OBJECT-GROUP    

cifconShowPortGroup 1.3.6.1.4.1.9.9.375.2.2.11
A collection of objects for the FICON statistics table.
OBJECT-GROUP    

cficonLinkIncidentGroup 1.3.6.1.4.1.9.9.375.2.2.12
A collection of objects for the FICON incidents table.
OBJECT-GROUP    

cficonCfgFileCupNameGroup 1.3.6.1.4.1.9.9.375.2.2.13
A collection of objects for the FICON CUP name for the vsan in the configuration files.
OBJECT-GROUP    

cficonConfigCopyGroup 1.3.6.1.4.1.9.9.375.2.2.14
A collection of objects for the FICON configuration copy operation.
OBJECT-GROUP    

cficonAutoSaveStateGroup 1.3.6.1.4.1.9.9.375.2.2.15
A collection of objects for the FICON configuration copy auto save operation.
OBJECT-GROUP    

cficonPortMapGroup 1.3.6.1.4.1.9.9.375.2.2.16
A collection of objects for the FICON port maps.
OBJECT-GROUP    

cficonNotificationGroup 1.3.6.1.4.1.9.9.375.2.2.17
A collection of FICON notifications.
NOTIFICATION-GROUP    

cficonPortMapGroupRev1 1.3.6.1.4.1.9.9.375.2.2.18
A collection of objects for the FICON port maps.
OBJECT-GROUP    

cficonReservedPortNumGroup 1.3.6.1.4.1.9.9.375.2.2.19
A collection of objects for the reserved FICON port numbers.
OBJECT-GROUP    

cficonRlirErlGroup 1.3.6.1.4.1.9.9.375.2.2.20
A collection of objects for displaying RLIR ERL.
OBJECT-GROUP    

cficonInterfaceSwapGroup 1.3.6.1.4.1.9.9.375.2.2.21
A collection of objects providing port swap functionality.
OBJECT-GROUP    

cficonDefaultPortBlockGroup 1.3.6.1.4.1.9.9.375.2.2.22
A collection of objects providing default port block state.
OBJECT-GROUP