CISCO-FC-MULTICAST-MIB

File: CISCO-FC-MULTICAST-MIB.mib (8314 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
CISCO-SMI CISCO-VSAN-MIB CISCO-ST-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP TEXTUAL-CONVENTION RowStatus
ciscoMgmt vsanIndex DomainIdOrZero

Defined Types

CfmMulticastRootMode  
TEXTUAL-CONVENTION    
  current INTEGER principalSwitch(1), lowestDomainSwitch(2)

CfmMulticastRootEntry  
SEQUENCE    
  cfmMulticastRootConfigMode CfmMulticastRootMode
  cfmMulticastRootOperMode CfmMulticastRootMode
  cfmMulticastRootDomainId DomainIdOrZero
  cfmMulticastRootRowStatus RowStatus

Defined Values

ciscoFcMulticastMIB 1.3.6.1.4.1.9.9.435
MIB module for monitoring and configuring Fibre Channel Multicast feature.
MODULE-IDENTITY    

ciscoFcMulticastNotifications 1.3.6.1.4.1.9.9.435.0
OBJECT IDENTIFIER    

ciscoFcMulticastMIBObjects 1.3.6.1.4.1.9.9.435.1
OBJECT IDENTIFIER    

ciscoFcMulticaseConformance 1.3.6.1.4.1.9.9.435.2
OBJECT IDENTIFIER    

cfmConfiguration 1.3.6.1.4.1.9.9.435.1.1
OBJECT IDENTIFIER    

cfmMulticastRootTable 1.3.6.1.4.1.9.9.435.1.1.1
This table allows the users to configure and monitor the FC Multicast parameters on all the VSANs configured on the local switch. An entry is automatically created in this table if there is an entry in the fspfTable (defined in CISCO-FSPF-MIB) and fspfOperStatus (defined in CISCO-FSPF-MIB) for that entry is 'up'. An entry is automatically deleted from this table if either : a) the fspfOperStatus in the fspfTable entry for the corresponding VSAN changes to 'down'. or b) the fspfTable entry for the corresponding VSAN is deleted. Entries in this table can be created via cfmMulticastRootRowStatus only as the means to specify non-default parameter values for a VSAN either because the VSAN is suspended or fspfOperStatus (defined in CISCO-FSPF-MIB) for that VSAN is 'down' (VSAN state is indicated by object vsanOperState which is defined in CISCO-VSAN-MIB). So an entry in this table exists when one or both of these conditions holds: - one or more configuration parameters have non-default values for a VSAN which is either suspended or the fspfOperStatus for that VSAN is down. - the fspfOperStatus for VSAN is 'up'. This has a number of consequences: - an entry exists for a suspended VSAN whenever that VSAN has non-default parameters. - an entry cannot be created (via cfmMulticastRootRowStatus) for a VSAN with default parameters; instead, the agent creates/deletes an entry for a VSAN with default parameters according to whether the fspfOperStatus is 'up' or 'down'. - an entry can not be created via cfmMulticastRootRowStatus unless non-default parameter values are (simultaneously) configured for a VSAN whose fspfOperStatus is 'down'. - deleting an entry via cfmMulticastRootRowStatus when either the VSAN is suspended and configured with non-default values or the VSAN is active, is equivalent to resetting its parameters to their default values. If an entry is configured with default-values and the VSAN is in suspended state, then the entry would be deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    CfmMulticastRootEntry

cfmMulticastRootEntry 1.3.6.1.4.1.9.9.435.1.1.1.1
This entry contains the multicase parameters on this VSAN.
OBJECT-TYPE    
  CfmMulticastRootEntry  

cfmMulticastRootConfigMode 1.3.6.1.4.1.9.9.435.1.1.1.1.1
The configured multicast root mode on this VSAN.
OBJECT-TYPE    
  CfmMulticastRootMode  

cfmMulticastRootOperMode 1.3.6.1.4.1.9.9.435.1.1.1.1.2
The operational multicast root mode on this VSAN.
OBJECT-TYPE    
  CfmMulticastRootMode  

cfmMulticastRootDomainId 1.3.6.1.4.1.9.9.435.1.1.1.1.3
The domainID of the multicast root on this VSAN.
OBJECT-TYPE    
  DomainIdOrZero  

cfmMulticastRootRowStatus 1.3.6.1.4.1.9.9.435.1.1.1.1.4
The status of conceptual row on this VSAN. This object can be used to create an entry only if either the corresponding VSAN is suspended or the fspfOperStatus is down. If the VSAN is either not-existent or fspfOperStatus is up, the create will fail.
OBJECT-TYPE    
  RowStatus  

ciscoFcMulticastMIBCompliances 1.3.6.1.4.1.9.9.435.2.1
OBJECT IDENTIFIER    

ciscoFcMulticastMIBGroups 1.3.6.1.4.1.9.9.435.2.2
OBJECT IDENTIFIER    

ciscoFcMulticastMIBCompliance 1.3.6.1.4.1.9.9.435.2.1.1
The compliance statement for entities which implement the CISCO-FC-MULTICAST-MIB.
MODULE-COMPLIANCE    

cfmConfigurationGroup 1.3.6.1.4.1.9.9.435.2.2.1
A collection of objects for FC multicast configuration.
OBJECT-GROUP