CISCO-DS0-CROSS-CONNECT-MIB

File: CISCO-DS0-CROSS-CONNECT-MIB.mib (7046 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	IF-MIB
SNMPv2-TC	CISCO-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
MODULE-COMPLIANCE	OBJECT-GROUP	InterfaceIndex
RowStatus	ciscoMgmt

Defined Types

Cds0CrossConnectConfigEntry
SEQUENCE
	cds0Endpt1Ds1	InterfaceIndex
	cds0Endpt1Ds0Group	Unsigned32
	cds0Endpt2Ds1	InterfaceIndex
	cds0Endpt2Ds0Group	Unsigned32
	cds0ConnRowStatus	RowStatus

Defined Values

ciscoDs0CrossConnectMIB		1.3.6.1.4.1.9.9.9999
The MIB for Ds0 cross connection.
MODULE-IDENTITY

ciscoDs0CrossConnectMIBNotifs		1.3.6.1.4.1.9.9.9999.0
OBJECT IDENTIFIER

ciscoDs0CrossConnectMIBObjects		1.3.6.1.4.1.9.9.9999.1
OBJECT IDENTIFIER

ciscoDs0CrossConnectMIBConformance		1.3.6.1.4.1.9.9.9999.2
OBJECT IDENTIFIER

cDs0CrossConnectConfig		1.3.6.1.4.1.9.9.9999.1.1
OBJECT IDENTIFIER

cds0CrossConnectConfigTable		1.3.6.1.4.1.9.9.9999.1.1.1
This table is used to establish a DS0 cross connection. A DS0 cross connect is established by binding a unique DS0 group containing one or more DS0s of a single Ds1 interface to another unique DS0 group containing one or more DS0s of a single DS1 interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cds0CrossConnectConfigEntry

cds0CrossConnectConfigEntry		1.3.6.1.4.1.9.9.9999.1.1.1.1
An entry in cds0CrossConnectConfigTable table represents a DS0 cross connection. The two end point of the connection are: end point 1: cds0Endpt1Ds1 cds0Endpt1Ds0Group end point 2: cds0Endpt2Ds1 cds0Endpt2Ds0Group The end points of this connection should be entries of ccasGrpCfgTable and 'ccasGrpCfgServiceType' of of the entries should be 'tdmxconn'. The ccasGrpCfgTable is defined in CISCO-CAS-IF-MIB.
Status: current	Access: not-accessible
OBJECT-TYPE
	Cds0CrossConnectConfigEntry

cds0Endpt1Ds1		1.3.6.1.4.1.9.9.9999.1.1.1.1.1
The value of this object equals to the 'ifIndex' of a Ds1 interface. This Ds1 interface is used as the first end point of the Ds0 connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	InterfaceIndex

cds0Endpt1Ds0Group		1.3.6.1.4.1.9.9.9999.1.1.1.1.2
The value of this object identifies a Ds0 group which contains one of more Ds0(s) within the Ds1 interface represented by 'cDs0Endpt1Ds1'. This Ds0 group is used as the first end point of the Ds0 connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32	0..31

cds0Endpt2Ds1		1.3.6.1.4.1.9.9.9999.1.1.1.1.3
The value of this object equals to the 'ifIndex' of a Ds1 interface. This Ds1 interface is used as the second end point of the Ds0 connection.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndex

cds0Endpt2Ds0Group		1.3.6.1.4.1.9.9.9999.1.1.1.1.4
The value of this object identifies a Ds0 group which contains one of more Ds0(s) within the Ds1 interface represented by 'cDs0Endpt2Ds1'. This Ds0 group is used as the second end point of the Ds0 connection.
Status: current	Access: read-create
OBJECT-TYPE
	Unsigned32	0..31

cds0ConnRowStatus		1.3.6.1.4.1.9.9.9999.1.1.1.1.5
This object is used to create or delete an entry. The mandatory objects for creating an entry in this table: 'cds0Endpt2Ds1' 'cds0Endpt2Ds0Group' The following objects are not allowed to be modified after the entry to be added: 'cds0Endpt2Ds1' 'cds0Endpt2Ds0Group'
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

ciscoDs0CrossConnectMIBCompliances		1.3.6.1.4.1.9.9.9999.2.1
OBJECT IDENTIFIER

ciscoDs0CrossConnectMIBGroups		1.3.6.1.4.1.9.9.9999.2.2
OBJECT IDENTIFIER

ciscoDs0CrossConnectMIBCompliance		1.3.6.1.4.1.9.9.9999.2.1.1
The compliance statement for Cisco agents which implement the CISCO-DSO-CROSS-CONNECT-MIB.
Status: current	Access: read-create
MODULE-COMPLIANCE

cDs0CrossConnectConfigGroup		1.3.6.1.4.1.9.9.9999.2.2.1
A collection of objects for general configuration of Ds0 cross connection.
Status: current	Access: read-create
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor