CISCO-DOT11-LBS-MIB

File: CISCO-DOT11-LBS-MIB.mib (15093 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP TEXTUAL-CONVENTION MacAddress
RowStatus TruthValue ifIndex
InetPortNumber InetAddressType InetAddress
SnmpAdminString ciscoMgmt

Defined Types

Cdot11LbsTrackMethodType  
TEXTUAL-CONVENTION    
  current BITS rssi(0)

Cdot11LbsPsPacketType  
TEXTUAL-CONVENTION    
  current INTEGER extended(1), short(2)

Cdot11LbsProfileEntry  
SEQUENCE    
  cdot11LbsProfileName SnmpAdminString
  cdot11LbsServerAddressType InetAddressType
  cdot11LbsServerAddress InetAddress
  cdot11LbsServerUdpPort InetPortNumber
  cdot11LbsTrackMethod Cdot11LbsTrackMethodType
  cdot11LbsPsPacketType Cdot11LbsPsPacketType
  cdot11LbsTrackMulticast MacAddress
  cdot11LbsMatchChannel TruthValue
  cdot11LbsProfileRowStatus RowStatus

Cdot11LbsProfileInterfEntry  
SEQUENCE    
  cdot11LbsProfInterfaceRowStatus RowStatus

Defined Values

ciscoDot11LbsMIB 1.3.6.1.4.1.9.9.454
This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Services allows third party applications and positioning servers to work with Access Points to track positions of wireless clients in the network. GLOSSARY and ACRONYMS AP Access point, a transmitter/receiver device that commonly connects and transports data between a wireless network and a wired network. LBS Location Based Services MAC Medium Access Control. Layer 2 in the network model. PS Positioning Server. An application server provides IEEE 802.11 wireless client location information and services. RSSI Received Signal Strength Indication.
MODULE-IDENTITY    

ciscoDot11LbsMIBNotifs 1.3.6.1.4.1.9.9.454.0
OBJECT IDENTIFIER    

ciscoDot11LbsMIBObjects 1.3.6.1.4.1.9.9.454.1
OBJECT IDENTIFIER    

ciscoDot11LbsMIBConformance 1.3.6.1.4.1.9.9.454.2
OBJECT IDENTIFIER    

ciscoDot11LbsConfigInfo 1.3.6.1.4.1.9.9.454.1.1
OBJECT IDENTIFIER    

ciscoDot11LbsStatistics 1.3.6.1.4.1.9.9.454.1.2
OBJECT IDENTIFIER    

cdot11LbsProfileTable 1.3.6.1.4.1.9.9.454.1.1.1
This table contains the set of attributes for configuration of connection to remote LBS positioning servers and tracking methods supported on the servers. A positioning server may support LBS application at multiple UDP ports. This wireless station serves as a LBS agent to track the wireless client device. It receives multicast wireless packet sending by the client devices on specific multicast addresses and forward the information to the positioning server.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdot11LbsProfileEntry

cdot11LbsProfileEntry 1.3.6.1.4.1.9.9.454.1.1.1.1
Each entry contains parameters to configure a LBS positioning server profile for this wireless station.
OBJECT-TYPE    
  Cdot11LbsProfileEntry  

cdot11LbsProfileName 1.3.6.1.4.1.9.9.454.1.1.1.1.1
This is the name of LBS profile for configuration of a connection to a LBS positioning server at a specific address and UDP port.
OBJECT-TYPE    
  SnmpAdminString Size(1..16)  

cdot11LbsServerAddressType 1.3.6.1.4.1.9.9.454.1.1.1.1.2
This is the address type of the cdot11LbsServerAddress.
OBJECT-TYPE    
  InetAddressType  

cdot11LbsServerAddress 1.3.6.1.4.1.9.9.454.1.1.1.1.3
This is the address of the LBS positioning server. The cdot11LbsServerAddressType specifies the type of this address.
OBJECT-TYPE    
  InetAddress  

cdot11LbsServerUdpPort 1.3.6.1.4.1.9.9.454.1.1.1.1.4
This is the UDP port of the LBS positioning server used to receive LBS packets from this wireless station.
OBJECT-TYPE    
  InetPortNumber  

cdot11LbsTrackMethod 0.1.3.6.1.4.1.9.9.454.1.1.1.1.5
This specifies the method used to detect the location of the wireless client relative to the position of this wireless station. RSSI method uses the strength of the received signals from the wireless client devices to determine their positions.
OBJECT-TYPE    
  Cdot11LbsTrackMethodType  

cdot11LbsPsPacketType 1.3.6.1.4.1.9.9.454.1.1.1.1.6
This specifies the type of LBS packets sent to the LBS position server from this wireless station.
OBJECT-TYPE    
  Cdot11LbsPsPacketType  

cdot11LbsTrackMulticast 1.3.6.1.4.1.9.9.454.1.1.1.1.7
This is the multicast MAC destination address of the LBS frames sending from the wireless clients to this wireless station.
OBJECT-TYPE    
  MacAddress  

cdot11LbsMatchChannel 1.3.6.1.4.1.9.9.454.1.1.1.1.8
This object determines if this wireless station will include LBS frames received in channels other than the sender's channel in the RSSI measurement. If the value is 'true', this station will include only LBS frames matching the sender's channel in the RSSI measurement. If the value is 'false', all received LBS frames will be included in the measurement.
OBJECT-TYPE    
  TruthValue  

cdot11LbsProfileRowStatus 1.3.6.1.4.1.9.9.454.1.1.1.1.9
This configures a new LBS positioning server for this wireless station and modifies or deletes an existing positioning server configuration. Creation of rows must be done via 'createAndGo' and with the cdot11LbsServerAddress and cdot11LbsServerUdpPort set to the address and UDP of the LBS positioning server. This object will become 'notInService' if the NMS successfully performs a multivarbind set for all required objects including this object while this profile is not attached to any wireless interface or a connection cannot be established to the LBS positioning server. This object will become 'active' when this profile is attached to at least one wireless interface via cdot11LbsProfInterfaceTable and a connection to the LBS positioning server is successfully established. Modification and deletion (via 'destroy') of rows can be done when this object is 'active', or 'notInService'. Deletion of a row will remove the corresponding entries for the same profile from the cdot11LbsProfInterfaceTable.
OBJECT-TYPE    
  RowStatus  

cdot11LbsProfInterfaceTable 1.3.6.1.4.1.9.9.454.1.1.2
This table configures the Location Based Services settings on the IEEE 802.11 radio interfaces of this device. This table has an expansion dependent relationship on the cdot11LbsProfileTable. This table uses the ifIndex of interfaces of ifType ieee80211(71) as the expansion index.
OBJECT-TYPE    
  SEQUENCE OF  
    Cdot11LbsProfileInterfEntry

cdot11LbsProfInterfaceEntry 1.3.6.1.4.1.9.9.454.1.1.2.1
Each entry indicates if the LBS client location tracking by a particular location positioning server profile is enabled on an IEEE 802.11 interface.
OBJECT-TYPE    
  Cdot11LbsProfileInterfEntry  

cdot11LbsProfInterfaceRowStatus 1.3.6.1.4.1.9.9.454.1.1.2.1.1
This configures and attaches a LBS profile to an IEEE 802.11 wireless LAN network interface or remove a configured interface from the profile. Creation of rows must be done via 'createAndGo' and specifying the cdot11LbsProfileName of an existing profile and the ifIndex of an IEEE 802.11 interface. This object will become 'active' when the profile is attached to a network interface and a connection to the LBS positioning server is successfully established. Otherwise, if this object will become 'notInService'. Modification and deletion (via 'destroy') of rows can be done when this object is 'active' or 'notInService'. If all interfaces are removed from an 'active' profile, the profile cdot11LbsProfileRowStatus will become 'notInService'.
OBJECT-TYPE    
  RowStatus  

ciscoDot11LbsMIBCompliances 1.3.6.1.4.1.9.9.454.2.1
OBJECT IDENTIFIER    

ciscoDot11LbsMIBGroups 1.3.6.1.4.1.9.9.454.2.2
OBJECT IDENTIFIER    

ciscoDot11LbsMIBCompliance 1.3.6.1.4.1.9.9.454.2.1.1
The compliance statement for the ciscoDot11LbsMIB module.
MODULE-COMPLIANCE    

ciscoDot11LbsConfigGroup 1.3.6.1.4.1.9.9.454.2.2.1
Configurations for IEEE 802.11 Location Based Services.
OBJECT-GROUP