CISCO-DMN-DSG-TUNING-MIB

File: CISCO-DMN-DSG-TUNING-MIB.mib (57473 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
CISCO-DMN-DSG-ROOT-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY Integer32
IpAddress DisplayString OBJECT-GROUP
MODULE-COMPLIANCE ciscoDSGUtilities

Defined Types

ActiveTunerEntry  
SEQUENCE    
  activeTunerIndex Integer32
  activeTunerRFInput INTEGER
  activeTunerFreq Integer32
  activeTunerSymbolRate Integer32
  activeTunerDVBSFEC INTEGER
  activeTunerModulation INTEGER
  activeTunerRollOff INTEGER
  activeTunerIQ INTEGER

ActiveInputEntry  
SEQUENCE    
  activeInputRFIndex INTEGER
  activeInputLNBType INTEGER
  activeInputLNBTrim Integer32
  activeInputLNBTrim2 Integer32
  activeInputLocalOscFreq1 Integer32
  activeInputLocalOscFreq2 Integer32
  activeInputCrossOver Integer32
  activeInputLocalOscControl INTEGER
  activeInputOrbitalPos Integer32
  activeInputEastWestFlag INTEGER
  activeInputPolarization INTEGER
  activeInputSatName DisplayString
  activeInputLastLNBConfig Integer32
  activeInputDiSeqCEnable INTEGER
  activeInputDiSeqCSwitch INTEGER

LnbPowerEntry  
SEQUENCE    
  lnbPowerIndex Integer32
  lnbPowerInput INTEGER
  lnbPowerControl INTEGER
  lnbPowerStatus INTEGER

SatSignalEntry  
SEQUENCE    
  satSignalIndex Integer32
  satSignalPvBer DisplayString
  satSignalQPSKBer DisplayString
  satSignalLdpCber DisplayString
  satSignalCndisp DisplayString
  satSignalCnMargin DisplayString
  satSignalLevel DisplayString
  satSignalSatDishCnMargin DisplayString
  satSignalSatDishSigLevel DisplayString
  satSignalPerDisp DisplayString
  satSignalAfc DisplayString
  satSignalUncorErrCnt DisplayString
  satSignalCorErrCnt DisplayString
  satSignalRfLock INTEGER
  satSignalDnLkFreq DisplayString
  satSignalLbandFreq DisplayString
  satSignalSymbolRate DisplayString
  satSignalFecRate INTEGER
  satSignalPolarization INTEGER
  satSignalModulation INTEGER
  satSignalIQ INTEGER
  satSignalLnbPsStatus INTEGER
  satSignalPilots INTEGER
  satSignalLoSelect INTEGER
  satSignalPolar INTEGER
  satSignalClearSigErrCnt INTEGER
  satSignalValidateOrbPosDate DisplayString
  satSignalValidateOrbPosStat DisplayString
  satSignalChScanStatus INTEGER
  satSignalSigLevelRaw DisplayString
  satSignalP1DStatus DisplayString
  satSignalDvbS2FrameLen INTEGER
  satSignalCnMarginRaw DisplayString
  satSignalDvbSQpskErrCount DisplayString
  satSignalDvbS2LdpcErrCount DisplayString
  satSignalPvErrCount DisplayString
  satSignalFecSyncStatus INTEGER
  satSignalPktErrCount DisplayString

InputStatusEntry  
SEQUENCE    
  inputStatusIndex Integer32
  inputStatusCurInput INTEGER
  inputStatusSatLock INTEGER
  inputStatusMpgIpLock INTEGER
  inputStatusInputRate DisplayString
  inputStatusNetworkName DisplayString
  inputStatusNetworkId DisplayString
  inputStatusTransportId DisplayString
  inputStatusScramblingMode INTEGER
  inputStatusTransportError INTEGER
  inputStatusAsiLock INTEGER
  inputStatusAsiLinkError INTEGER
  inputStatusAsiPacketSize INTEGER
  inputStatusLastTuneReason DisplayString
  inputStatusCurD985xInput DisplayString
  inputStatusIpiLinkStatus DisplayString
  inputStatusIpiSignal DisplayString
  inputStatusIpiFecLock DisplayString
  inputStatusIpiPcrLock DisplayString
  inputStatusIpiDelLatency DisplayString
  inputStatusIpiData1SrcIP IpAddress
  inputStatusIpiData2SrcIP IpAddress
  inputStatusIpiData1TsType DisplayString
  inputStatusIpiData2TsType DisplayString

SiRcvOptionEntry  
SEQUENCE    
  siRcvOptionInstance Integer32
  siRcvOptionAcqMode INTEGER
  siRcvOptionReacq INTEGER
  siRcvOptionNetID Integer32
  siRcvOptionInputSel INTEGER
  siRcvOptionFreqSel INTEGER
  siRcvOptionServListMode INTEGER
  siRcvOptionUseBAT INTEGER
  siRcvOptionUseNIT INTEGER
  siRcvOptionUseSDT INTEGER
  siRcvOptionUsePAT INTEGER

SiRcvOptionStatusEntry  
SEQUENCE    
  siRcvOptionStatusInstance Integer32
  siRcvOptionLastChanReas INTEGER
  siRcvOptionLastActivated DisplayString
  siRcvOptionStatusFreqSel INTEGER
  siRcvOptionStatusServListMode INTEGER
  siRcvOptionStatusUseBAT INTEGER
  siRcvOptionStatusUseNIT INTEGER
  siRcvOptionStatusUseSDT INTEGER
  siRcvOptionStatusUsePAT INTEGER

SiInfoRxEntry  
SEQUENCE    
  siInfoRxInstance Integer32
  siInfoRxIdx Integer32
  siInfoRxType INTEGER
  siInfoRxIDExt DisplayString
  siInfoRxUid DisplayString
  siInfoRxStatus INTEGER
  siInfoRxVer DisplayString
  siInfoRxPID DisplayString
  siInfoRxSections DisplayString

SiInfoTsEntry  
SEQUENCE    
  siInfoTsInstance Integer32
  siInfoTsIdx Integer32
  siInfoTsId DisplayString
  siInfoTsFreq DisplayString
  siInfoTsSymRate DisplayString
  siInfoTsOrbPosn DisplayString
  siInfoTsPolar INTEGER
  siInfoTsFEC INTEGER
  siInfoTsModulation INTEGER
  siInfoTsOrgNetID DisplayString
  siInfoTsEastWestFlag INTEGER

SiInfoVCInfoEntry  
SEQUENCE    
  siInfoVCInfoInstance Integer32
  siInfoVCInfoIdx Integer32
  siInfoVCInfoId DisplayString
  siInfoVCInfoTxID DisplayString
  siInfoVCInfoProgName DisplayString
  siInfoVCInfoPMTPID DisplayString
  siInfoVCInfoCHType INTEGER
  siInfoVCInfoECMPID DisplayString
  siInfoVCInfoAuthorized INTEGER

Defined Values

ciscoDSGTuning 1.3.6.1.4.1.1429.2.2.5.5
Cisco DSG Tuning MIB.
MODULE-IDENTITY    

activeTuning 1.3.6.1.4.1.1429.2.2.5.5.1
OBJECT IDENTIFIER    

activeTuningTable 1.3.6.1.4.1.1429.2.2.5.5.2
OBJECT IDENTIFIER    

tuningStatusTable 1.3.6.1.4.1.1429.2.2.5.5.3
OBJECT IDENTIFIER    

siRcvTable 1.3.6.1.4.1.1429.2.2.5.5.4
OBJECT IDENTIFIER    

activeTuningInput 1.3.6.1.4.1.1429.2.2.5.5.1.1
Select Input for tuning.
OBJECT-TYPE    
  INTEGER asi(1), rf1(2), rf2(3), rf3(4), rf4(5), ipi(6), none(255)  

activeTuningValidateOrbPos 1.3.6.1.4.1.1429.2.2.5.5.1.2
Command used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position.
OBJECT-TYPE    
  INTEGER writeOnly(1), yes(2)  

activeTuningChScan 1.3.6.1.4.1.1429.2.2.5.5.1.3
Channel Scan command. Setting scan( 1 ) triggers the channel scanning process.
OBJECT-TYPE    
  INTEGER scan(1), writeOnly(2)  

activeTunerTable 1.3.6.1.4.1.1429.2.2.5.5.2.1
Active Tuner Table.
OBJECT-TYPE    
  SEQUENCE OF  
    ActiveTunerEntry

activeTunerEntry 1.3.6.1.4.1.1429.2.2.5.5.2.1.1
Entry for Active Tuner Table.
OBJECT-TYPE    
  ActiveTunerEntry  

activeTunerIndex 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1
Active Tuner Index.
OBJECT-TYPE    
  Integer32 1..1  

activeTunerRFInput 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2
Active Tuner RF Input.
OBJECT-TYPE    
  INTEGER rf1(2), rf2(3), rf3(4), rf4(5), none(255)  

activeTunerFreq 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3
The Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeTunerSymbolRate 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4
Data rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ).
OBJECT-TYPE    
  Integer32 10000..450000  

activeTunerDVBSFEC 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5
Forward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable.
OBJECT-TYPE    
  INTEGER oneHalf(1), twoThirds(3), threeQuarters(4), fiveSixths(6), sevenEigths(7), auto(10)  

activeTunerModulation 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6
Signal Modulation type.
OBJECT-TYPE    
  INTEGER dvbs(1), dvbs2(2)  

activeTunerRollOff 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7
Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100.
OBJECT-TYPE    
  INTEGER f35(1), f25(2), f20(3)  

activeTunerIQ 1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8
Spectrum Inversion.
OBJECT-TYPE    
  INTEGER inverted(1), nonInverted(2), auto(3)  

activeInputTable 1.3.6.1.4.1.1429.2.2.5.5.2.2
Active Input Table.
OBJECT-TYPE    
  SEQUENCE OF  
    ActiveInputEntry

activeInputEntry 1.3.6.1.4.1.1429.2.2.5.5.2.2.1
Entry for Active Input Table.
OBJECT-TYPE    
  ActiveInputEntry  

activeInputRFIndex 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1
Selection of RF Input.
OBJECT-TYPE    
  INTEGER rf1(1), rf2(2), rf3(3), rf4(4)  

activeInputLNBType 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2
LNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced.
OBJECT-TYPE    
  INTEGER cBand(1), singleKuBand(2), dualKuBand(3), advanced(4)  

activeInputLNBTrim 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3
Low Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeInputLNBTrim2 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4
Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeInputLocalOscFreq1 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5
RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeInputLocalOscFreq2 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6
RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeInputCrossOver 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7
Crossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz.
OBJECT-TYPE    
  Integer32 0..15000000  

activeInputLocalOscControl 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8
22KHz Local Osillator Control.
OBJECT-TYPE    
  INTEGER off(1), on(2), auto(3)  

activeInputOrbitalPos 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9
Orbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree.
OBJECT-TYPE    
  Integer32 0..3600  

activeInputEastWestFlag 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10
RF Mapping Location East/West Flag.
OBJECT-TYPE    
  INTEGER east(1), west(2), notApplicable(3)  

activeInputPolarization 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11
RF Mapping Polarization.
OBJECT-TYPE    
  INTEGER horizontal(1), vertical(2), automatic(3)  

activeInputSatName 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12
Satellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically.
OBJECT-TYPE    
  DisplayString Size(0..32)  

activeInputLastLNBConfig 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13
LNB configuration last applied.
OBJECT-TYPE    
  Integer32 1..10  

activeInputDiSeqCEnable 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14
DiSeqC On/Off.
OBJECT-TYPE    
  INTEGER disable(1), enable(2)  

activeInputDiSeqCSwitch 1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15
DiSeqC switch selection.
OBJECT-TYPE    
  INTEGER off(1), a(2), b(3), c(4), d(5), e(6), f(7), g(8), h(9), i(10), j(11), k(12), l(13), m(14), n(15), o(16), p(17)  

lnbPowerTable 1.3.6.1.4.1.1429.2.2.5.5.2.3
LNB power Table.
OBJECT-TYPE    
  SEQUENCE OF  
    LnbPowerEntry

lnbPowerEntry 1.3.6.1.4.1.1429.2.2.5.5.2.3.1
Entry for LNB power Table.
OBJECT-TYPE    
  LnbPowerEntry  

lnbPowerIndex 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1
Low Noise Block Power Index.
OBJECT-TYPE    
  Integer32 1..1  

lnbPowerInput 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2
Low Noise Block Power Input.
OBJECT-TYPE    
  INTEGER rf1(2), rf2(3), rf3(4), rf4(5), none(255)  

lnbPowerControl 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3
Active LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ignore polarity in NIT ) 18V ( 18V always, ignore polarity in NIT ) 13V-NIT ( 13V initially, over-ride by polarity in NIT ) 18V-NIT ( 18V initially, over-ride by polarity in NIT ).
OBJECT-TYPE    
  INTEGER off(1), thirteenV(2), eighteenH(3), hNIT(4), vNIT(5)  

lnbPowerStatus 1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4
Low Noise Block Power Supply Status.
OBJECT-TYPE    
  INTEGER notApplicable(1), normal(2), noLoad(3), overTemperature(4), overLoad(5), shortCircuit(6), disabled(7)  

satSignalTable 1.3.6.1.4.1.1429.2.2.5.5.3.1
Satellite Signal Table.
OBJECT-TYPE    
  SEQUENCE OF  
    SatSignalEntry

satSignalEntry 1.3.6.1.4.1.1429.2.2.5.5.3.1.1
Entry for Satellite Signal Table.
OBJECT-TYPE    
  SatSignalEntry  

satSignalIndex 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1
Satellite Signal Table Index.
OBJECT-TYPE    
  Integer32 1..1  

satSignalPvBer 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2
Status: DVB-S Post-Viterbi Bit Error Rate.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalQPSKBer 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3
Status: Quadrature phase-shift keying ( QPSK ) Bit error rate.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalLdpCber 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4
Status: DVB-S2 Low Density Parity Check Bit Error Rate.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalCndisp 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5
Status: Carrier to Noise Ratio.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalCnMargin 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6
Status: Carrier to Noise Ratio Link Margin.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalLevel 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7
Status: Signal Level.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalSatDishCnMargin 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8
Status: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB.
OBJECT-TYPE    
  DisplayString Size(0..40)  

satSignalSatDishSigLevel 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9
Status: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm).
OBJECT-TYPE    
  DisplayString Size(0..40)  

satSignalPerDisp 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10
Status: DVB-S2 Packet Error Rate.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalAfc 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11
Status: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalUncorErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12
Status: Uncorrected Error Counter. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalCorErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13
Status: DVB-S Reed-Solomon Corrected Error Counter.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalRfLock 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14
Status: RF Lock Status.
OBJECT-TYPE    
  INTEGER noLock(1), lock(2)  

satSignalDnLkFreq 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15
Status: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalLbandFreq 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16
Status: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalSymbolRate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17
Status: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second.
OBJECT-TYPE    
  DisplayString Size(0..32)  

satSignalFecRate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18
Status: Forward Error Correction Rate.
OBJECT-TYPE    
  INTEGER notApplicable(1), half(2), threeFifth(3), twoThird(4), threeQuater(5), fourFifth(6), fiveSixth(7), sevenEight(8), eightNinth(9), nineTenth(10), auto(11)  

satSignalPolarization 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19
Status: Signal Polarization.
OBJECT-TYPE    
  INTEGER horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)  

satSignalModulation 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20
Status: Signal Modulation Type.
OBJECT-TYPE    
  INTEGER notApplicable(1), qpskDvbs(2), qpskDvbs2(3), eightPskDvbs2(4), sixteenQamDvbs2(5)  

satSignalIQ 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21
Status: Spectrum Inversion.
OBJECT-TYPE    
  INTEGER inverted(1), nonlnverted(2), auto(3), notApplicable(4)  

satSignalLnbPsStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22
Status: Low Noise Block Power Supply Status.
OBJECT-TYPE    
  INTEGER notApplicable(1), normal(2), noLoad(3), overTemperature(4), overLoad(5), shortCircuit(6), disabled(7)  

satSignalPilots 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23
Status: Presence of Pilot Symbols.
OBJECT-TYPE    
  INTEGER no(1), yes(2), notApplicable(3)  

satSignalLoSelect 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24
Status: LO Select.
OBJECT-TYPE    
  INTEGER off(1), on(2), auto(3)  

satSignalPolar 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25
Status: Polarization.
OBJECT-TYPE    
  INTEGER horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)  

satSignalClearSigErrCnt 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26
Set this variable to yes( 2 ) to clear signal error counter.
OBJECT-TYPE    
  INTEGER writeOnly(1), yes(2)  

satSignalValidateOrbPosDate 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27
Status: Last Orbital Position Validate Date.
OBJECT-TYPE    
  DisplayString Size(0..63)  

satSignalValidateOrbPosStat 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28
Status: Orbital Position Validation Status.
OBJECT-TYPE    
  DisplayString Size(0..63)  

satSignalChScanStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29
Channel Scanning Status :Off/Scanning/Done.
OBJECT-TYPE    
  INTEGER off(1), scanning(2), done(3)  

satSignalSigLevelRaw 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30
Signal Level - RAW Register Value.
OBJECT-TYPE    
  DisplayString Size(0..5)  

satSignalP1DStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31
P1 DSTATUS.
OBJECT-TYPE    
  DisplayString Size(0..3)  

satSignalDvbS2FrameLen 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32
DVB-S2 Frame Length.
OBJECT-TYPE    
  INTEGER shortFrame(1), longFrame(2), notApplicable(3)  

satSignalCnMarginRaw 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33
C/N Margin - RAW Register Value.
OBJECT-TYPE    
  DisplayString Size(0..17)  

satSignalDvbSQpskErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34
DVB-S QPSK Error Count.
OBJECT-TYPE    
  DisplayString Size(0..8)  

satSignalDvbS2LdpcErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35
DVB-S2 LPDC Error Count.
OBJECT-TYPE    
  DisplayString Size(0..8)  

satSignalPvErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36
DVB-S PV Error Count.
OBJECT-TYPE    
  DisplayString Size(0..8)  

satSignalFecSyncStatus 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37
FEC SYNC Status for DVB-S PV Decoder.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

satSignalPktErrCount 1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38
DVB-S/DVB-S2 Packet Error Count.
OBJECT-TYPE    
  DisplayString Size(0..10)  

inputStatusTable 1.3.6.1.4.1.1429.2.2.5.5.3.2
Input Status Table.
OBJECT-TYPE    
  SEQUENCE OF  
    InputStatusEntry

inputStatusEntry 1.3.6.1.4.1.1429.2.2.5.5.3.2.1
Entry for Input Status Table.
OBJECT-TYPE    
  InputStatusEntry  

inputStatusIndex 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1
Status: Index for inputStatus Table.
OBJECT-TYPE    
  Integer32 1..1  

inputStatusCurInput 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2
Status: Current Input for D9865 only.
OBJECT-TYPE    
  INTEGER rf(1)  

inputStatusSatLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3
Status: Satellite Lock: No Lock/Lock+Sig/Lock-Sig.
OBJECT-TYPE    
  INTEGER nolock(1), lockminussignal(2), lockplussignal(3)  

inputStatusMpgIpLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4
Signal Validity.MPEG over IP Lock.
OBJECT-TYPE    
  INTEGER nolock(1), lock(2)  

inputStatusInputRate 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5
Status: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps.
OBJECT-TYPE    
  DisplayString Size(0..32)  

inputStatusNetworkName 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6
Status: Network Name.
OBJECT-TYPE    
  DisplayString Size(0..64)  

inputStatusNetworkId 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7
Status: Network ID.
OBJECT-TYPE    
  DisplayString Size(0..32)  

inputStatusTransportId 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8
Status: Transport ID.
OBJECT-TYPE    
  DisplayString Size(0..32)  

inputStatusScramblingMode 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9
Status: Scrambling mode.
OBJECT-TYPE    
  INTEGER unknown(1), des(2), dvb(3), biss1(4), biss2(5), biss3(6)  

inputStatusTransportError 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10
Status: Transport Error.
OBJECT-TYPE    
  INTEGER notApplicable(1), ok(2), error(3)  

inputStatusAsiLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11
Status: ASI Lock.
OBJECT-TYPE    
  INTEGER nolock(1), lock(2)  

inputStatusAsiLinkError 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12
Status: ASI Link Error.
OBJECT-TYPE    
  INTEGER notApplicable(1), ok(2), error(3)  

inputStatusAsiPacketSize 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13
Status: ASI Packet Size.
OBJECT-TYPE    
  INTEGER notApplicable(1), oneHundredAndEightyEight(2), twoHundredAndFour(3)  

inputStatusLastTuneReason 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14
Status: Reason for the last tune.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusCurD985xInput 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15
Status: Current Input for all IRD models.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiLinkStatus 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16
Status: IPI Ethernet Link Status.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiSignal 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17
Status: IPI Signal Encapsulation Lock Status.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiFecLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18
Status: FEC Lock Status.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiPcrLock 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19
Status: Indicates if PCR is received without errors or not.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiDelLatency 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20
Status: Dejitter Buffer Latency.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiData1SrcIP 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21
Status: DATA1 Source IP Selected.
OBJECT-TYPE    
  IpAddress  

inputStatusIpiData2SrcIP 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22
Status: DATA2 Source IP Selected.
OBJECT-TYPE    
  IpAddress  

inputStatusIpiData1TsType 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23
Status: DATA1 Source Transport Type.
OBJECT-TYPE    
  DisplayString Size(0..16)  

inputStatusIpiData2TsType 1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24
Status: DATA2 Source Transport Type.
OBJECT-TYPE    
  DisplayString Size(0..16)  

siRcvOptionTable 1.3.6.1.4.1.1429.2.2.5.5.4.1
Rcv Option Table.
OBJECT-TYPE    
  SEQUENCE OF  
    SiRcvOptionEntry

siRcvOptionEntry 1.3.6.1.4.1.1429.2.2.5.5.4.1.1
Entry for Rcv Option Table.
OBJECT-TYPE    
  SiRcvOptionEntry  

siRcvOptionInstance 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1
Instance for siRcvOptionTable.
OBJECT-TYPE    
  Integer32 1..1  

siRcvOptionAcqMode 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2
Custom Tuning Mode: Acquisition Mode.
OBJECT-TYPE    
  INTEGER basic(1), auto(2), custom(3)  

siRcvOptionReacq 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3
Set this variable to yes( 2 ) to reacquire signal.
OBJECT-TYPE    
  INTEGER writeOnly(1), yes(2)  

siRcvOptionNetID 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4
Network ID.
OBJECT-TYPE    
  Integer32 0..65535  

siRcvOptionInputSel 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5
UserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to 'Yes' for SW Mapped option.
OBJECT-TYPE    
  INTEGER userCfg(1), swMap(2)  

siRcvOptionFreqSel 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6
Custom Tuning Mode: Frequency Tuning Mode: NIT/Preset.
OBJECT-TYPE    
  INTEGER nit(1), userCfg(2)  

siRcvOptionServListMode 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7
Custom Tuning Mode: Service List Mode: Rigorous/Degraded.
OBJECT-TYPE    
  INTEGER rigorous(1), degraded(2)  

siRcvOptionUseBAT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8
Custom Tuning Mode:Bouquet Association Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionUseNIT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9
Custom Tuning Mode:Network Information Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionUseSDT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10
Custom Tuning Mode:Service Description Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionUsePAT 1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11
Custom Tuning Mode:Program Association Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionStatusTable 1.3.6.1.4.1.1429.2.2.5.5.4.2
Rcv Option Status Table.
OBJECT-TYPE    
  SEQUENCE OF  
    SiRcvOptionStatusEntry

siRcvOptionStatusEntry 1.3.6.1.4.1.1429.2.2.5.5.4.2.1
Entry for Rcv Option Status Table.
OBJECT-TYPE    
  SiRcvOptionStatusEntry  

siRcvOptionStatusInstance 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1
Instance of siRcv Option Status Table.
OBJECT-TYPE    
  Integer32 1..1  

siRcvOptionLastChanReas 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2
Source of the last tuning.
OBJECT-TYPE    
  INTEGER nit(1), uplinkForceRetune(2), userEntry(3), preset(4)  

siRcvOptionLastActivated 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3
Last Preset Activated number.The range is from 0 to 64.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siRcvOptionStatusFreqSel 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4
Status of Frequency tuning mode.
OBJECT-TYPE    
  INTEGER nit(1), userCfg(2)  

siRcvOptionStatusServListMode 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5
Status of Service list mode.
OBJECT-TYPE    
  INTEGER rigorous(1), degraded(2)  

siRcvOptionStatusUseBAT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6
Status of Bouquet Association Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionStatusUseNIT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7
Status of Network Information Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionStatusUseSDT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8
Status of Service Description Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siRcvOptionStatusUsePAT 1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9
Status of Program Association Table in Service List.
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

siInfoRxTable 1.3.6.1.4.1.1429.2.2.5.5.4.3
Service information Receive table.
OBJECT-TYPE    
  SEQUENCE OF  
    SiInfoRxEntry

siInfoRxEntry 1.3.6.1.4.1.1429.2.2.5.5.4.3.1
Entry for Service Information Received.
OBJECT-TYPE    
  SiInfoRxEntry  

siInfoRxInstance 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1
Instance of SI Info Receive table.
OBJECT-TYPE    
  Integer32 1..1  

siInfoRxIdx 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2
Service Information Receive Table Index.
OBJECT-TYPE    
  Integer32 1..65535  

siInfoRxType 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3
Service Information Receive Table Type.
OBJECT-TYPE    
  INTEGER pat(1), cat(2), pmt(3), tsdt(4), nit(5), nitother(6), sdt(7), sdtother(8), bat(9), aeitpf(10), oeitpf(11), aeitES0(12), aeitES1(13), oeitES(14), tdt(15), rst(16), st(17), tot(18), dit(19), sit(20), ecmodd(21), ecmeven(22), emm(23), mpe(24), dpi(25), drt(26), cdt(27), mct(28), mat(29), mit(30), ect(31), invalidtableid(32)  

siInfoRxIDExt 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4
Service Information Receive Table ID Extension. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoRxUid 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5
Service Information Receive Unique ID. The range is from 1 to 32.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoRxStatus 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6
Service Information Receive Status.
OBJECT-TYPE    
  INTEGER none(1), partial(2), full(3), update(4), timeout(5), lost(6)  

siInfoRxVer 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7
Service Information Version. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoRxPID 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8
Service Information Program ID. The range is from 0 to 8192.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoRxSections 1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9
Service Information Number of Sections. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsTable 1.3.6.1.4.1.1429.2.2.5.5.4.4
Transport Stream table.
OBJECT-TYPE    
  SEQUENCE OF  
    SiInfoTsEntry

siInfoTsEntry 1.3.6.1.4.1.1429.2.2.5.5.4.4.1
Entry for Transport stream table.
OBJECT-TYPE    
  SiInfoTsEntry  

siInfoTsInstance 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1
Transport Stream Table Instance.
OBJECT-TYPE    
  Integer32 1..1  

siInfoTsIdx 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2
Service Information Transport Stream Index.
OBJECT-TYPE    
  Integer32 1..256  

siInfoTsId 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3
Frequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsFreq 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4
Frequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsSymRate 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5
Frequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsOrbPosn 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6
Frequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 .
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsPolar 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7
Frequency Plan: Service Information Polarization.
OBJECT-TYPE    
  INTEGER horizontal(1), vertical(2), leftCircular(3), rightCircular(4), auto(5)  

siInfoTsFEC 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8
Frequency Plan: Service Information Forward Error Correction Rate.
OBJECT-TYPE    
  INTEGER notApplicable(1), half(2), threeFifth(3), twoThird(4), threeQuarter(5), fourFifth(6), fiveSixth(7), sevenEighth(8), eightNinth(9), nineTenth(10), auto(11)  

siInfoTsModulation 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9
Frequency Plan: Service Information Modulation.
OBJECT-TYPE    
  INTEGER notapplicable(1), qpskDvbS(2), qpskDvbS2(3), eightPskDvbS2(4), sixteenQamDvbsS2(5)  

siInfoTsOrgNetID 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10
Frequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoTsEastWestFlag 1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11
Frequency Plan: Service Information East West flag.
OBJECT-TYPE    
  INTEGER east(1), west(2), notApplicable(3)  

siInfoVCInfoTable 1.3.6.1.4.1.1429.2.2.5.5.4.5
VC table.
OBJECT-TYPE    
  SEQUENCE OF  
    SiInfoVCInfoEntry

siInfoVCInfoEntry 1.3.6.1.4.1.1429.2.2.5.5.4.5.1
Entry for VC information.
OBJECT-TYPE    
  SiInfoVCInfoEntry  

siInfoVCInfoInstance 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1
Virtual Channel Info table Instance.
OBJECT-TYPE    
  Integer32 1..1  

siInfoVCInfoIdx 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2
Virtual Channel Info table Index.
OBJECT-TYPE    
  Integer32 1..262144  

siInfoVCInfoId 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3
Service Information VC Service ID. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoVCInfoTxID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4
Service Information VC Transport Stream ID. The range is from 0 to 4294967295.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoVCInfoProgName 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5
Service Information VC Programme Name.
OBJECT-TYPE    
  DisplayString Size(0..63)  

siInfoVCInfoPMTPID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6
Service Information VC Program Map Table Program ID.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoVCInfoCHType 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7
Service Type:TV service/ Radio service.
OBJECT-TYPE    
  INTEGER tv(1), radio(2), other(3)  

siInfoVCInfoECMPID 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8
Service Information VC Entitlement Control Message Program ID.
OBJECT-TYPE    
  DisplayString Size(0..32)  

siInfoVCInfoAuthorized 1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9
Service List: Channel Authorized: Yes/No.
OBJECT-TYPE    
  INTEGER no(1), yes(2)