CISCO-DLC-SWITCH-MIB

File: CISCO-DLC-SWITCH-MIB.mib (29101 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RFC1213-MIB IF-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MacAddress TEXTUAL-CONVENTION MODULE-COMPLIANCE
OBJECT-GROUP ifIndex InterfaceIndexOrZero
ciscoMgmt

Defined Types

SAP  
Service Access Point - is a term that denotes the means by which a user entity in layer n+1 accesses a service of a provider entity in layer n.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1)  

SdlcAddress  
A hexadecimal address assigned to a secondary poll station of an SDLC device.
TEXTUAL-CONVENTION    
  OCTET STRING Size(1)  

FrasBnnSdlcConEntry  
SEQUENCE    
  bnnSdlcConAddress SdlcAddress
  bnnSdlcConState INTEGER
  bnnSdlcConDlci Integer32
  bnnSdlcConFRInterface InterfaceIndexOrZero
  bnnSdlcConLocalSap SAP
  bnnSdlcConRemoteSap SAP

FrasBnnLlcConEntry  
SEQUENCE    
  bnnLlcConDeviceMacAddress MacAddress
  bnnLlcConLanLocalSap SAP
  bnnLlcConLanRemoteSap SAP
  bnnLlcConLanInterface InterfaceIndexOrZero
  bnnLlcConDlci Integer32
  bnnLlcConState INTEGER
  bnnLlcConLocalMacAddress MacAddress
  bnnLlcConFrLocalSap SAP
  bnnLlcConFrRemoteSap SAP

FrasBanSdlcConEntry  
SEQUENCE    
  banSdlcConLocalInterface InterfaceIndexOrZero
  banSdlcConAddress SdlcAddress
  banSdlcConBanDlciMac MacAddress
  banSdlcConDlci Integer32
  banSdlcConState INTEGER
  banSdlcConVmac MacAddress
  banSdlcConBniAddress MacAddress
  banSdlcConFrLocalSap SAP
  banSdlcConFrRemoteSap SAP

FrasBanLlcConEntry  
SEQUENCE    
  banLlcEndstnLocalMac MacAddress
  banLlcBanDlciMac MacAddress
  banLlcConLocalSap SAP
  banLlcConRemoteSap SAP
  banLlcConDlci Integer32
  banLlcConState INTEGER
  banLlcConFrInterface InterfaceIndexOrZero
  banLlcBniAddress MacAddress
  banLlcConFrLocalSap SAP
  banLlcConFrRemoteSap SAP

Defined Values

ciscoDlcSwitchMIB 1.3.6.1.4.1.9.9.76
This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or enduster sessions only. It does not contain objects supported by the FRAS-HOST MIB which are specific to upstream or host-end sessions.
MODULE-IDENTITY    

ciscoDlcSwitchMIBObjects 1.3.6.1.4.1.9.9.76.1
OBJECT IDENTIFIER    

frasBnnSdlc 1.3.6.1.4.1.9.9.76.1.1
OBJECT IDENTIFIER    

frasBnnLlc 1.3.6.1.4.1.9.9.76.1.2
OBJECT IDENTIFIER    

frasBanSdlc 1.3.6.1.4.1.9.9.76.1.3
OBJECT IDENTIFIER    

frasBanLlc 1.3.6.1.4.1.9.9.76.1.4
OBJECT IDENTIFIER    

frasBnnSdlcConTable 1.3.6.1.4.1.9.9.76.1.1.1
This table contains mapping information for each SDLC Link Station in a FRAS-BNN to SDLC connection. All entries are derived entirely from the router configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrasBnnSdlcConEntry

frasBnnSdlcConEntry 1.3.6.1.4.1.9.9.76.1.1.1.1
This table contains the entries defined for a specific SDLC Link Station in a BNN-SDLC configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrasBnnSdlcConEntry  

bnnSdlcConAddress 1.3.6.1.4.1.9.9.76.1.1.1.1.1
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SdlcAddress  

bnnSdlcConState 1.3.6.1.4.1.9.9.76.1.1.1.1.2
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reset(1), testSent(2), xidexchg(3), connrqsent(4), sigstnwait(5), connrspwait(6), connrspsent(7), contacted(8), discwait(9)  

bnnSdlcConDlci 1.3.6.1.4.1.9.9.76.1.1.1.1.3
The Data Link Connection Identifier used for this particular connection.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 16..1022  

bnnSdlcConFRInterface 1.3.6.1.4.1.9.9.76.1.1.1.1.4
This is the Frame-Relay interface which the SDLC Link Station is using to connect to the Host.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

bnnSdlcConLocalSap 1.3.6.1.4.1.9.9.76.1.1.1.1.5
The Local SAP for this SDLC station's corresponding LLC session to the host.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

bnnSdlcConRemoteSap 1.3.6.1.4.1.9.9.76.1.1.1.1.6
The Remote SAP for this SDLC station's corresponding LLC session to the host.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

frasBnnLlcConTable 1.3.6.1.4.1.9.9.76.1.2.1
This table contains information for each End Station in a FRAS-BNN to LLC connection. The entries are derived entirely from the router configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrasBnnLlcConEntry

frasBnnLlcConEntry 1.3.6.1.4.1.9.9.76.1.2.1.1
This table contains information for a specific End Station's connection state in a BNN-LLC connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrasBnnLlcConEntry  

bnnLlcConDeviceMacAddress 1.3.6.1.4.1.9.9.76.1.2.1.1.1
This value is the End Station's Local Mac-Address.
Status: current Access: not-accessible
OBJECT-TYPE    
  MacAddress  

bnnLlcConLanLocalSap 1.3.6.1.4.1.9.9.76.1.2.1.1.2
The End Station's Local SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SAP  

bnnLlcConLanRemoteSap 1.3.6.1.4.1.9.9.76.1.2.1.1.3
The End Station's Remote SAP.
Status: current Access: not-accessible
OBJECT-TYPE    
  SAP  

bnnLlcConLanInterface 1.3.6.1.4.1.9.9.76.1.2.1.1.4
This is the physical interace which the End Station is attached to.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

bnnLlcConDlci 1.3.6.1.4.1.9.9.76.1.2.1.1.5
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 16..1022  

bnnLlcConState 1.3.6.1.4.1.9.9.76.1.2.1.1.6
Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reset(1), testSent(2), xidexchg(3), connrqsent(4), sigstnwait(5), connrspwait(6), connrspsent(7), contacted(8), discwait(9)  

bnnLlcConLocalMacAddress 1.3.6.1.4.1.9.9.76.1.2.1.1.7
The Mac-Address configured as the End Station's target or Remote address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

bnnLlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.2.1.1.8
The FRAS router's Local SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

bnnLlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.2.1.1.9
The FRAS router's Remote SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

frasBanSdlcConTable 1.3.6.1.4.1.9.9.76.1.3.1
This table contains information for each SDLC Link Station in a FRAS-BAN to SDLC connection. The entries are derived entirely from the router configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrasBanSdlcConEntry

frasBanSdlcConEntry 1.3.6.1.4.1.9.9.76.1.3.1.1
This table contains information for a specific SDLC Link Station in a configured for a BAN connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrasBanSdlcConEntry  

banSdlcConLocalInterface 1.3.6.1.4.1.9.9.76.1.3.1.1.1
This is the physical interface the SDLC Link Stations are connected to.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

banSdlcConAddress 1.3.6.1.4.1.9.9.76.1.3.1.1.2
This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.
Status: current Access: read-only
OBJECT-TYPE    
  SdlcAddress  

banSdlcConBanDlciMac 1.3.6.1.4.1.9.9.76.1.3.1.1.3
The End Station's target or Remote mac-address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banSdlcConDlci 1.3.6.1.4.1.9.9.76.1.3.1.1.4
The Data Link Connection Identifier for the corresponding LLC2 session over Frame-Relay to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 16..1022  

banSdlcConState 1.3.6.1.4.1.9.9.76.1.3.1.1.5
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reset(1), testSent(2), xidexchg(3), connrqsent(4), sigstnwait(5), connrspwait(6), connrspsent(7), contacted(8), discwait(9)  

banSdlcConVmac 1.3.6.1.4.1.9.9.76.1.3.1.1.6
The End Station's virtual Mac-Address which is comprised of a TR formatted template and the SDLC Link Station address appended on the last nibble.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banSdlcConBniAddress 1.3.6.1.4.1.9.9.76.1.3.1.1.7
BNI is Boundary Node Identifier which is the FRAS-BAN connection's Remote address in TR-format. It is by default 4fff.0000.0000
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banSdlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.3.1.1.8
The FRAS router's Local SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

banSdlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.3.1.1.9
The FRAS router's Remote SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

frasBanLlcConTable 1.3.6.1.4.1.9.9.76.1.4.1
This table contains information for each LAN attached End Station in a FRAS-BAN to LAN connection. The entries are from endstations which have their destination mac-addresses as the BAN-DLCI-MAC address.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FrasBanLlcConEntry

frasBanLlcConEntry 1.3.6.1.4.1.9.9.76.1.4.1.1
This table contains information for a specific LAN attached End Station.
Status: current Access: not-accessible
OBJECT-TYPE    
  FrasBanLlcConEntry  

banLlcEndstnLocalMac 1.3.6.1.4.1.9.9.76.1.4.1.1.1
This value is the End Station's Local Mac-Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banLlcBanDlciMac 1.3.6.1.4.1.9.9.76.1.4.1.1.2
This value is the End Station's Remote Mac-Address. It is also the FRAS-BAN connection's Local Mac-Address.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banLlcConLocalSap 1.3.6.1.4.1.9.9.76.1.4.1.1.3
The endstation's Local SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

banLlcConRemoteSap 1.3.6.1.4.1.9.9.76.1.4.1.1.4
The endstation's Remote SAP.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

banLlcConDlci 1.3.6.1.4.1.9.9.76.1.4.1.1.5
The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 16..1022  

banLlcConState 1.3.6.1.4.1.9.9.76.1.4.1.1.6
Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Connect response wait state connrspsent - Connect response sent contacted - Session established discwait - Disconnect wait state
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reset(1), testSent(2), xidexchg(3), connrqsent(4), sigstnwait(5), connrspwait(6), connrspsent(7), contacted(8), discwait(9)  

banLlcConFrInterface 1.3.6.1.4.1.9.9.76.1.4.1.1.7
This is the Frame-Relay interface for this particular session.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

banLlcBniAddress 1.3.6.1.4.1.9.9.76.1.4.1.1.8
This value is the FRAS-BAN connection's Target Mac-Address. It is by default 4fff.0000.0000
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

banLlcConFrLocalSap 1.3.6.1.4.1.9.9.76.1.4.1.1.9
The Local SAP of the corresponding LLC2 session over Frame-Relay to the host.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

banLlcConFrRemoteSap 1.3.6.1.4.1.9.9.76.1.4.1.1.10
The Remote SAP of the corresponding LLC2 session over Frame-Relay to the host.
Status: current Access: read-only
OBJECT-TYPE    
  SAP  

ciscoDlcSwitchConformance 1.3.6.1.4.1.9.9.76.2
OBJECT IDENTIFIER    

ciscoDlcSwitchCompliances 1.3.6.1.4.1.9.9.76.2.1
OBJECT IDENTIFIER    

ciscoDlcSwitchGroups 1.3.6.1.4.1.9.9.76.2.2
OBJECT IDENTIFIER    

ciscoDlcSwitchCoreCompliance 1.3.6.1.4.1.9.9.76.2.1.1
The core compliance statement for all FRAS connections.
Status: current Access: read-only
MODULE-COMPLIANCE    

frasBnnSdlcGroup 1.3.6.1.4.1.9.9.76.2.2.1
The frasBnnSdlcGroup defines objects which are common to the BNN SDLC of all compliant connections.
Status: current Access: read-only
OBJECT-GROUP    

frasBnnLlcGroup 1.3.6.1.4.1.9.9.76.2.2.2
The frasBnnLlcGroup defines objects which are common to the BNN LLC of all compliant connections.
Status: current Access: read-only
OBJECT-GROUP    

frasBanSdlcGroup 1.3.6.1.4.1.9.9.76.2.2.3
The frasBanSdlcGroup defines objects which are common to the BAN SDLC of all compliant connections.
Status: current Access: read-only
OBJECT-GROUP    

frasBanLlcGroup 1.3.6.1.4.1.9.9.76.2.2.4
The frasBanLlcGroup defines objects which are common to the BAN LLC of all compliant connections.
Status: current Access: read-only
OBJECT-GROUP