CISCO-CIPCMPC-MIB
File:
CISCO-CIPCMPC-MIB.mib (24770 bytes)
Imported modules
Imported symbols
Defined Types
| CipCmpcSubChannelAdminEntry |
|
| SEQUENCE |
|
|
|
| |
cipCmpcSubChannelAdminPath |
ChannelPath |
|
| |
cipCmpcSubChannelAdminDevice |
ChannelDevice |
|
| |
cipCmpcSubChannelAdminTgName |
ChannelTgName |
|
| |
cipCmpcSubChannelAdminDirection |
INTEGER |
|
| |
cipCmpcSubChannelAdminTgTransport |
TDomain |
|
| |
cipCmpcSubChannelAdminRowStatus |
RowStatus |
|
| CipCmpcSubChannelOperEntry |
|
| SEQUENCE |
|
|
|
| |
cipCmpcSubChannelOperState |
INTEGER |
|
| |
cipCmpcSubChannelOperMaxbfru |
Integer32 |
|
| CipCmpcTgOperEntry |
|
| SEQUENCE |
|
|
|
| |
cipCmpcTgOperName |
ChannelTgName |
|
| |
cipCmpcTgOperLastSeqNumFailureCause |
INTEGER |
|
| |
cipCmpcTgOperLastSeqNumFailureTime |
TimeStamp |
|
| |
cipCmpcTgOperExpectedReceiveSeqNum |
Integer32 |
|
| |
cipCmpcTgOperLastSeqNumReceived |
Integer32 |
|
| |
cipCmpcTgOperLastSeqNumSent |
Integer32 |
|
| CipCmpcTgStatsEntry |
|
| SEQUENCE |
|
|
|
| |
cipCmpcTgStatsConnectReqs |
Counter32 |
|
| |
cipCmpcTgStatsConnectInds |
Counter32 |
|
| |
cipCmpcTgStatsConnectRsps |
Counter32 |
|
| |
cipCmpcTgStatsConnectCnfms |
Counter32 |
|
| |
cipCmpcTgStatsDiscReqs |
Counter32 |
|
| |
cipCmpcTgStatsDiscInds |
Counter32 |
|
| |
cipCmpcTgStatsSweepReqsIn |
Counter32 |
|
| |
cipCmpcTgStatsSweepReqsOut |
Counter32 |
|
| |
cipCmpcTgStatsSweepRspsIn |
Counter32 |
|
| |
cipCmpcTgStatsSweepRspsOut |
Counter32 |
|
| |
cipCmpcTgStatsWraps |
Counter32 |
|
Defined Values
| ciscoCipCmpcMIB |
1.3.6.1.4.1.9.9.72 |
| This is the Management Information Base (MIB)
module for objects used to manage the Cisco Multi-Path
Channel (MPC) support on Cisco Mainframe Channel
Connection (CMCC) cards, also called the CMPC feature.
-------------------------------------------------
| Acronym Definitions: |
| CIP = Channel Interface Processor |
| CMPC = Cisco Multi-Path Channel |
| HPR = High Performance Routing |
| HPDT = High Performance Data Transfer |
| ISR = Intermediate Session Routing |
| MPC = Multi-Path Channel |
| MPC+ = HPDT MPC |
| SNA = Systems Network Architecture |
| TG = Transmission Group |
-------------------------------------------------
This MIB consists of the following tables:
1) CMPC Subchannel Administration
2) CMPC Subchannel Operational
3) CMPC TG Statistics
Refer to the following MIBs for an understanding of Cisco
channel terminology and Cisco CMCC terminology:
CISCO-CHANNEL-MIB
CISCO-CIPCSNA-MIB
CISCO-CIPLAN-MIB
CISCO-CIPTG-MIB
|
| MODULE-IDENTITY |
|
|
|
| cipCmpcTg |
1.3.6.1.4.1.9.9.72.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| cipCmpcSubChannelAdminTable |
1.3.6.1.4.1.9.9.72.1.1.1 |
| This table contains configuration information used to
define subchannels for the Cisco Multi-Path Channel
(CMPC) feature on the CMCC card.
Each instance of this table is created when a CMPC
sub-channel is configured on the router. When the
CMPC sub-channel configuration statement is deleted
from the router, the instance represented by this
table is removed. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CipCmpcSubChannelAdminEntry |
|
| cipCmpcSubChannelAdminEntry |
1.3.6.1.4.1.9.9.72.1.1.1.1 |
| A list of CMPC configuration values. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CipCmpcSubChannelAdminEntry |
|
|
| cipCmpcSubChannelAdminDevice |
1.3.6.1.4.1.9.9.72.1.1.1.1.2 |
| Device address of the subchannel the attached
host will use to communicate with this CMPC
instance. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
ChannelDevice |
|
|
| cipCmpcSubChannelAdminTgName |
1.3.6.1.4.1.9.9.72.1.1.1.1.3 |
| This is the name of the CMPC transmission group.
Each CMPC subchannel in the same connection
transmission group must have the same TG name |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
ChannelTgName |
|
|
| cipCmpcSubChannelAdminDirection |
1.3.6.1.4.1.9.9.72.1.1.1.1.4 |
| Specifies whether the CMPC subchannel is for host
reads or host writes. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
read(1), write(2), readOrWrite(3) |
|
| cipCmpcSubChannelAdminTgTransport |
1.3.6.1.4.1.9.9.72.1.1.1.1.5 |
| This object specifies the Transmission Group
transport type OID for which this CMPC Sub-Channel
instance if configured.
When the Transmission Group for this CMPC Sub-Channel
instance is not configured, this object will be set to
the NULL TDomian { 0, 0 }. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TDomain |
|
|
| cipCmpcSubChannelAdminRowStatus |
1.3.6.1.4.1.9.9.72.1.1.1.1.6 |
| This object is used by a Management Station to create
or delete the row entry in the cipCmpcSubChannelAdminTable
following the the RowStatus textual convention.
Upon successful creation of the row, an Agent
automatically creates a corresponding entry in
the cipCmpcSubChannelOperTable and
cipCmpcSubChannelStatsTable.
The Management Station can initiate row deletion, by
setting this value to 'destroy (6)'. The Agent will
then delete the rows corresponding to this CMPC
instance from the cipCmpcSubChannelAdminTable,
cipCmpcSubChannelOperTable and cipCmpcSubChannelStatsTable. |
| Status: current |
Access: read-create |
| OBJECT-TYPE |
|
|
|
| |
RowStatus |
|
|
| cipCmpcSubChannelOperEntry |
1.3.6.1.4.1.9.9.72.1.1.2.1 |
| A list of CMPC operational and status values. The
entries are created by the Agent. They have
read-only access. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CipCmpcSubChannelOperEntry |
|
|
| cipCmpcSubChannelOperState |
1.3.6.1.4.1.9.9.72.1.1.2.1.1 |
| Activation state of the CMPC subchannel.
shutdown - CMCC interface with this CMPC
subchannel configured is shutdown.
inactive - CMCC physical channel up, CMPC
subchannel has not started to
activate yet.
xid2Pending - VTAM and CMCC CMPC have started
negotiating channel connection.
active - CMCC CMPC subchannel is active in
MPC or non-HPDT mode.
activePlus - CMCC CMPC subchannel is active in
MPC+ or HPDT mode. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
shutdown(1), inactive(2), xid2Pending(3), active(4), activePlus(5) |
|
| cipCmpcSubChannelOperMaxbfru |
1.3.6.1.4.1.9.9.72.1.1.2.1.2 |
| Maximum number of 4096 byte buffers allowed per
channel block I/O on this CMPC subchannel. For host
write subchannels, this is the maximum number of
4096 byte buffers the host can write to the CMCC for
each channel block I/O. Since the CMCC is capable of
receiving 16 4096 byte buffers per channel block I/O,
the value on host write subchannels will always be 16.
For host read subchannels, this is the maximum number
of 4096 byte buffers the host can read from the CMCC
for each channel block I/O. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| cipCmpcTgOperTable |
1.3.6.1.4.1.9.9.72.1.2.1 |
| This table contains Operational information
for each instance of a CMPC Transmission
Group (TG).
Each instance of this table is created for every
CMPC TG with a unique tg-name configured on a
CMCC card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CipCmpcTgOperEntry |
|
| cipCmpcTgOperEntry |
1.3.6.1.4.1.9.9.72.1.2.1.1 |
| A list of CMPC TG Operational objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CipCmpcTgOperEntry |
|
|
| cipCmpcTgOperName |
1.3.6.1.4.1.9.9.72.1.2.1.1.1 |
| This is the name for this instance of a
CMPC transmission group (TG). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
ChannelTgName |
|
|
| cipCmpcTgOperLastSeqNumFailureCause |
1.3.6.1.4.1.9.9.72.1.2.1.1.2 |
| The last CMPC TG sequence number failure
cause.
none - No sequence number errors
have been detected.
blockSeqError - Sequence number received
in a cmpc I/O block did not
match the expected sequence
number.
sweepSeqError - Sequence number received in
a sweep message does not compare
to the expected sequence number.
for this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
none(1), blockSeqError(2), sweepSeqError(3) |
|
| cipCmpcTgOperLastSeqNumFailureTime |
1.3.6.1.4.1.9.9.72.1.2.1.1.3 |
| This object describes the value of sysUpTime
when this CMPC TG last detected a sequence
number error. If the CMPC TG has not failed,
then this value shall be zero. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| cipCmpcTgStatsTable |
1.3.6.1.4.1.9.9.72.1.2.2 |
| This table contains statistical information
for each instance of a CMPC Transmission
Group (TG).
Each instance of this table is created for every CMPC
TG with a unique tg-name configured on a CMCC card. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CipCmpcTgStatsEntry |
|
| cipCmpcTgStatsEntry |
1.3.6.1.4.1.9.9.72.1.2.2.1 |
| A list of CMPC TG statistical objects. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CipCmpcTgStatsEntry |
|
|
| cipCmpcTgStatsConnectReqs |
1.3.6.1.4.1.9.9.72.1.2.2.1.1 |
| Number of connect requests received from
the host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsConnectInds |
1.3.6.1.4.1.9.9.72.1.2.2.1.2 |
| Number of connect indications sent to the
host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsConnectRsps |
1.3.6.1.4.1.9.9.72.1.2.2.1.3 |
| Number of connect responses received from
the host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsDiscReqs |
1.3.6.1.4.1.9.9.72.1.2.2.1.5 |
| Number of disconnect requests received from
the host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsDiscInds |
1.3.6.1.4.1.9.9.72.1.2.2.1.6 |
| Number of disconnect Indications sent to the
host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsSweepReqsIn |
1.3.6.1.4.1.9.9.72.1.2.2.1.7 |
| Number of sweep requests received
from from the host by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsSweepRspsIn |
1.3.6.1.4.1.9.9.72.1.2.2.1.9 |
| Number of CMPC sweep responses received
from VTAM by this CMPC TG. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcTgStatsWraps |
1.3.6.1.4.1.9.9.72.1.2.2.1.11 |
| Number of times the CMPC sequence number
for this TG has wrapped. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| cipCmpcDirectionMismatch |
1.3.6.1.4.1.9.9.72.2.0.1 |
| This trap indicates that the
configured direction for the specified
CMPC subchannel does not match
the direction specified by the host.
The CMPC subchannel will not activate
as long as this mismatch exists. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| cipCmpcSeqNumError |
1.3.6.1.4.1.9.9.72.2.0.2 |
| This trap indicates that the CMPC
TG has detected an MPC sequence
number error.
This error will cause the CMPC TG
to disconnect. |
| Status: current |
Access: read-only |
| NOTIFICATION-TYPE |
|
|
|
| ciscoCipCmpcMibCompliance |
1.3.6.1.4.1.9.9.72.3.1.1 |
| The compliance statement for the Cisco Multi-Path
Channel (CMPC) feature. |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| ciscoCipCmpcSubChannelGroup |
1.3.6.1.4.1.9.9.72.3.2.1 |
| A collection of objects providing Cisco
Multi-Path Channel (CMPC) Administration,
Operational status and Statistics. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| ciscoCipCmpcTgGroup |
1.3.6.1.4.1.9.9.72.3.2.2 |
| A collection of objects providing CMPC
TG Operational and Statistical information. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|