CISCO-ATM-TRUNK-STAT-MIB
File:
CISCO-ATM-TRUNK-STAT-MIB.mib (52367 bytes)
Imported modules
Imported symbols
Defined Types
| CatsPvcHistoryEntry |
|
| SEQUENCE |
|
|
|
| |
catsPvcVpi |
AtmVpIdentifier |
|
| |
catsPvcVci |
AtmVcIdentifier |
|
| |
catsPvcIntervalIndex |
Unsigned32 |
|
| |
catsPvcValidFlag |
TruthValue |
|
| |
catsPvcDiscontinuityTime |
TimeStamp |
|
| |
catsPvcAtmXmtCells |
Counter32 |
|
| |
catsPvcAtmRcvCells |
Counter32 |
|
| |
catsPvcAvgAtmXmtCells |
Counter32 |
|
| |
catsPvcAvgAtmRcvCells |
Counter32 |
|
| |
catsPvcPeakAtmXmtCells |
Counter32 |
|
| |
catsPvcPeakAtmRcvCells |
Counter32 |
|
| |
catsPvcOamXmtEndLpbkCells |
Counter32 |
|
| |
catsPvcOamRcvEndLpbkCells |
Counter32 |
|
| |
catsPvcOamXmtSegLpbkCells |
Counter32 |
|
| |
catsPvcOamRcvSegLpbkCells |
Counter32 |
|
| |
catsPvcOamLpbkLostCells |
Counter32 |
|
| |
catsPvcDiscardedRcvOamCells |
Counter32 |
|
| |
catsPvcAisSuppressCnts |
Counter32 |
|
| |
catsPvcXmtAisCnts |
Counter32 |
|
| |
catsPvcRcvAisCnts |
Counter32 |
|
| |
catsPvcXmtFerfCnts |
Counter32 |
|
| |
catsPvcRcvFerfCnts |
Counter32 |
|
| |
catsPvcXmtAisCells |
Counter32 |
|
| |
catsPvcRcvAisCells |
Counter32 |
|
| |
catsPvcXmtFerfCells |
Counter32 |
|
| |
catsPvcRcvFerfCells |
Counter32 |
|
| |
catsPvcOamLpbkTimeoutCnts |
Counter32 |
|
| |
catsPvcNewOamLpbkTimeoutDur |
Unsigned32 |
|
| |
catsPvcActiveOamLpbkTimeoutDur |
Unsigned32 |
|
| |
catsPvcOamLpbkTimeoutThreshold |
Unsigned32 |
|
| CatsAal2PvcHistoryEntry |
|
| SEQUENCE |
|
|
|
| |
catsAal2PvcVpi |
AtmVpIdentifier |
|
| |
catsAal2PvcVci |
AtmVcIdentifier |
|
| |
catsAal2PvcIntervalIndex |
Unsigned32 |
|
| |
catsAal2PvcValidFlag |
TruthValue |
|
| |
catsAal2PvcDiscontinuityTime |
TimeStamp |
|
| |
catsAal2PvcCpsSentPkts |
Counter32 |
|
| |
catsAal2PvcCpsRcvdPkts |
Counter32 |
|
| |
catsAal2PvcHecErrors |
Counter32 |
|
| |
catsAal2PvcCrcErrors |
Counter32 |
|
| |
catsAal2PvcInvOsfCells |
Counter32 |
|
| |
catsAal2PvcInvParCells |
Counter32 |
|
| |
catsAal2PvcCpsInvCidPkts |
Counter32 |
|
| |
catsAal2PvcCpsInvUuiPkts |
Counter32 |
|
| |
catsAal2PvcCpsInvLenPkts |
Counter32 |
|
| CatsAal5PvcHistoryEntry |
|
| SEQUENCE |
|
|
|
| |
catsAal5PvcVpi |
AtmVpIdentifier |
|
| |
catsAal5PvcVci |
AtmVcIdentifier |
|
| |
catsAal5PvcIntervalIndex |
Unsigned32 |
|
| |
catsAal5PvcValidFlag |
TruthValue |
|
| |
catsAal5PvcDiscontinuityTime |
TimeStamp |
|
| |
catsAal5PvcPduSentPkts |
Counter32 |
|
| |
catsAal5PvcPduRcvdPkts |
Counter32 |
|
| |
catsAal5PvcInvCpiPdus |
Counter32 |
|
| |
catsAal5PvcOverSizedSDUs |
Counter32 |
|
| |
catsAal5PvcInvLenPdus |
Counter32 |
|
| |
catsAal5PvcCrc32ErrorPdus |
Counter32 |
|
| |
catsAal5PvcReassemTimerExpiryPdus |
Counter32 |
|
| CatsCidHistoryEntry |
|
| SEQUENCE |
|
|
|
| |
catsCidVpi |
AtmVpIdentifier |
|
| |
catsCidVci |
AtmVcIdentifier |
|
| |
catsCid |
Unsigned32 |
|
| |
catsCidIntervalIndex |
Unsigned32 |
|
| |
catsCidValidFlag |
TruthValue |
|
| |
catsCidDiscontinuityTime |
TimeStamp |
|
| |
catsCidAvgSentPkts |
Counter32 |
|
| |
catsCidAvgRcvdPkts |
Counter32 |
|
| |
catsCidSentPkts |
Counter32 |
|
| |
catsCidRcvdPkts |
Counter32 |
|
| |
catsCidSentOctets |
Counter32 |
|
| |
catsCidRcvdOctets |
Counter32 |
|
| |
catsCidSentPeakPkts |
Counter32 |
|
| |
catsCidRcvdPeakPkts |
Counter32 |
|
| |
catsCidExtAISRcvdPkts |
Counter32 |
|
| |
catsCidExtRAIRcvdPkts |
Counter32 |
|
| |
catsCidExtConnAISRcvdPkts |
Counter32 |
|
| |
catsCidExtConnRDIRcvdPkts |
Counter32 |
|
| |
catsCidExtAISRcvCnts |
Counter32 |
|
| |
catsCidExtRAIRcvCnts |
Counter32 |
|
| |
catsCidExtConnAISCnts |
Counter32 |
|
| |
catsCidExtConnRDICnts |
Counter32 |
|
| |
catsCidExtAISXmtCnts |
Counter32 |
|
| |
catsCidExtRAIXmtCnts |
Counter32 |
|
Defined Values
| ciscoAtmTrunkStatMIB |
1.3.6.1.4.1.9.9.407 |
| The MIB module contains ATM Trunk statistics.
TERMINOLOGY
-----------
PVC: Permanent Virtual Circuit
OAM: Operation and Management
CRC: Cyclic redundancy check
AIS: Alarm Indication Signal
TDM: Time Division Multiplex
FERF: Far End Receive Failure
CPS: Common Part Sub-layer
PDU: Protocol Data Unit
HEC: Header Error Control
DSP: Digital Signal Processing
CID: Channel Identifier
UUI: User-to-User Information
VoIP: Voice over IP
CCS: Common Channel Signaling
VoAAL2: Voice over AAL2
SDU: Service Data Unit
HDLC: High Level Data Link Control
SAR: Segmantation and Reassembly
External AIS - is an Alarm Indication Signal associated
with a maintenance alarm detected on a defective
maintenance span, that is transmitted in the direction
of the defect as a substitute for normal signal.
The purpose is to show the downstream entities that
a defect has been identified and to prevent other
maintenance alarms consequent to this first defect.
External AIS bit stream is represented by an all 1's
signal.
Ref - ITU-T Rec. M.20 sec. 5.4.2 a
External RAI - is a Remote Alarm Indication signal
that is transmitted upstream from an entity that has
detected defects persisting long enough to constitute
a received signal failure. Its purpose is to report in
the backward direction that there is an interruption
of service in the forward direction.
The forward direction is from the originating end of
the alarm to the remote end.
The backward direction is from the remote end to the
orginating end of the alarm.
Ref - ITU-T Rec. G.704 section 2.1.3.1.3
I.366.2 - ANNEX N
External Connection AIS - is a Alarm Indicating Signal
transmitted in the downstream direction from the AAL
type 2 connecting point that first detects a defect
affecting the AAL type 2 connection; this includes
defects indicated by lower layers.
Ref - ITU-T Rec. I.610 sec 6.2.2.1.1.1
External Connection RDI - is a signal transmitted upstream
by an AAl type 2 endpoint that is in an alarm state as the
result of having received an AAL type2 connection AIS or
having detected a defect that affects the AAL type2
connection.
All ATM alarm definitions are specified in I.610
(ITU standard).
|
| MODULE-IDENTITY |
|
|
|
| catsPvcHistoryTable |
1.3.6.1.4.1.9.9.407.1.1.1 |
| This table represents a 24 hour history of
statistics per PVC. The statistics are collected
using 15 minute intervals.
Entries in this table are populated at the
end of the interval.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CatsPvcHistoryEntry |
|
| catsPvcHistoryEntry |
1.3.6.1.4.1.9.9.407.1.1.1.1 |
| An entry in the table. Each entry represents the PVC
statistics for a given 15 minute interval.
The ifIndex refers to the instance in the ifTable
with ifType propAtm(197) or atm(37).
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CatsPvcHistoryEntry |
|
|
| catsPvcVpi |
1.3.6.1.4.1.9.9.407.1.1.1.1.1 |
| The VPI value for the PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVpIdentifier |
|
|
| catsPvcVci |
1.3.6.1.4.1.9.9.407.1.1.1.1.2 |
| The VCI value for the PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVcIdentifier |
|
|
| catsPvcIntervalIndex |
1.3.6.1.4.1.9.9.407.1.1.1.1.3 |
| This is the history interval number.
The intervals are 15 minutes long and thus for
a 24 hour period there will be 96 intervals.
The 24 hour interval is aligned to wall clock.
The index of 1 will represent the interval from
00:00 to 00:15. The index of 2 will represent the
interval from 00:15 to 00:30 and so on.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..96 |
|
| catsPvcValidFlag |
1.3.6.1.4.1.9.9.407.1.1.1.1.4 |
| This object is used to indicate if the entry has
valid statistics data. It contains a value of
true(1) if the data is valid and false(2) otherwise.
A possible scenario when this flag will be set
to false(2) is when there are time changes due to
daylight savings time and/ or time zone changes.
This flag can also be set to false(2) if the
statistics in this 15 minute interval have
experienced discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| catsPvcDiscontinuityTime |
1.3.6.1.4.1.9.9.407.1.1.1.1.5 |
| This object will represent the timestamp when the
statistics in this 15 minute interval were
discontinued due to a forced clear on the module.
If this has the default value then it indicates
that the statistics in this interval have not
experienced any discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| catsPvcAtmXmtCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.6 |
| The total number of cells transmitted by this
PVC towards the ATM network.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcAtmRcvCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.7 |
| The total number of cells received by this PVC
from the ATM network.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcAvgAtmXmtCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.8 |
| The average number of cells transmitted towards
the network by this PVC.
The average is computed by dividing the total
number of cells transmitted over this 15 minute
interval by the interval time (15 minutes).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcAvgAtmRcvCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.9 |
| The average number of cells received from
the network by the PVC.
The average is computed by dividing the total
number of cells received over this 15 minute
interval by the interval time (15 minutes).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcPeakAtmXmtCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.10 |
| The peak number of cells per second transmitted
towards the network.
The transmitted cells per second are monitored
every second and the peak value over this 15
minute interval is returned in this object.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcPeakAtmRcvCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.11 |
| The peak number of cells per second received
from the network.
The received cells per second are monitored
every second and the peak value over this
15 minute interval is returned in this object.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamXmtEndLpbkCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.12 |
| The number of OAM end-to-end loopback cells
that were transmitted on this connection during
this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamRcvEndLpbkCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.13 |
| The number of OAM end-to-end loopback cells
that were received on this connection during
this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamXmtSegLpbkCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.14 |
| The number of OAM Segment loop back cells
that were transmitted on this connection during
this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamRcvSegLpbkCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.15 |
| The number of OAM Segment loop back cells
that were received on this connection during
this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamLpbkLostCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.16 |
| This object keeps track of the number of
OAM loopback cells lost.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcDiscardedRcvOamCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.17 |
| The number of OAM cells that had CRC errors
and are not counted in any other counters for
received OAM cells.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcAisSuppressCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.18 |
| The number of instances that an ATM AIS alarm
was successfully suppressed which prevented the
alarm from propagating to the TDM interfaces.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcXmtAisCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.19 |
| The number of instances that an ATM AIS alarm
was transmitted.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcRcvAisCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.20 |
| The number of instances that an ATM AIS alarm
was received.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcXmtFerfCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.21 |
| The number of instances that an ATM FERF alarm
was transmitted.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcRcvFerfCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.22 |
| The number of instances that an ATM FERF alarm
was received.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcXmtAisCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.23 |
| The number of AIS cells that were transmitted
on this connection during this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcRcvAisCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.24 |
| The number of AIS cells that were received
on this connection during this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcXmtFerfCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.25 |
| The number of FERF cells that were transmitted
on this connection during this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcRcvFerfCells |
1.3.6.1.4.1.9.9.407.1.1.1.1.26 |
| The number of FERF cells that were received
on this connection during this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcOamLpbkTimeoutCnts |
1.3.6.1.4.1.9.9.407.1.1.1.1.27 |
| The number of instances that OAM Loopback
Timeout alarm had occurred within this
15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsPvcNewOamLpbkTimeoutDur |
1.3.6.1.4.1.9.9.407.1.1.1.1.28 |
| The duration of new OAM Loopback Timeout
alarms for this 15 minute interval expressed
in seconds.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| catsPvcActiveOamLpbkTimeoutDur |
1.3.6.1.4.1.9.9.407.1.1.1.1.29 |
| The total duration of new and past OAM loopback
timeout alarms that were active during this 15
minute interval.
For example, if the an alarm lasted for a total of
50 seconds and crossed interval boundaries.
In the previous 15 minute interval it lasted for
30 seconds and 20 seconds in the current 15 minute
interval. There is a new alarm that lasted for 15
seconds in the current 15 minute interval as well.
Thus, this object will have a value of 20+15 = 35 seconds.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| catsPvcOamLpbkTimeoutThreshold |
1.3.6.1.4.1.9.9.407.1.1.1.1.30 |
| This is the threshold for OAM Loopback Timeout
alarm expressed in seconds. If the OAM cell is not
received back within the threshold specified in this
object, an OAM loopback timeout alarm is generated.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..60 |
|
| catsAal2PvcHistoryTable |
1.3.6.1.4.1.9.9.407.1.1.2 |
| This table represents a 24 hour history of
statistics per AAL2 PVC. The statistics are collected
using 15 minute intervals.
Entries in this table are populated at the
end of the interval.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CatsAal2PvcHistoryEntry |
|
| catsAal2PvcHistoryEntry |
1.3.6.1.4.1.9.9.407.1.1.2.1 |
| An entry in the table. Each entry contains the
statistics for particular AAL2 PVC for the given 15
minute interval.
The primary index, ifIndex, will be of ifType propAtm(197),
atm(37) or aal2(187).
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CatsAal2PvcHistoryEntry |
|
|
| catsAal2PvcVpi |
1.3.6.1.4.1.9.9.407.1.1.2.1.1 |
| The VPI value for the AAL2 PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVpIdentifier |
|
|
| catsAal2PvcVci |
1.3.6.1.4.1.9.9.407.1.1.2.1.2 |
| The VCI value for the AAL2 PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVcIdentifier |
|
|
| catsAal2PvcIntervalIndex |
1.3.6.1.4.1.9.9.407.1.1.2.1.3 |
| This is the history interval number.
The intervals are 15 minutes long and thus for
a 24 hour period there will be 96 intervals.
The 24 hour interval is aligned to wall clock.
The index of 1 will represent the interval from
00:00 to 00:15. The index of 2 will represent the
interval from 00:15 to 00:30 and so on.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..96 |
|
| catsAal2PvcValidFlag |
1.3.6.1.4.1.9.9.407.1.1.2.1.4 |
| This object is used to indicate if the entry has
valid statistics data. It contains a value of
true(1) if the data is valid and false(2) otherwise.
A possible scenario when this flag will be set
to false(2) is when there are time changes due to
daylight savings time and/ or time zone changes.
This flag can also be set to false(2) if
statistics in this 15 minute interval have
experienced discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| catsAal2PvcDiscontinuityTime |
1.3.6.1.4.1.9.9.407.1.1.2.1.5 |
| This object will represent the timestamp when the
statistics in this 15 minute interval were
discontinued due to a forced clear on the module.
If this has the default value then it indicates that
the statistics in this interval have not experienced
any discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| catsAal2PvcCpsSentPkts |
1.3.6.1.4.1.9.9.407.1.1.2.1.6 |
| The number of AAL2 CPS packets sent to the
network during this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcCpsRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.2.1.7 |
| The number of AAL2 CPS packets received from
the network during this 15 minute interval.
This does not include the packets which are
counted as error packets.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcHecErrors |
1.3.6.1.4.1.9.9.407.1.1.2.1.8 |
| The number of egress AAL2(ATM Adaptation layer 2)
CPS PDU dropped due to HEC error.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcCrcErrors |
1.3.6.1.4.1.9.9.407.1.1.2.1.9 |
| The number of egress AAL2 Type3 CPS PDUs dropped
due to invalid CRC-10 error.
CRC validation is for Type 3 packets only.
Type 1 packets are not subjected to CRC-10 error
validation. This does not count the Type 3 packets
generated by the DSP.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcInvOsfCells |
1.3.6.1.4.1.9.9.407.1.1.2.1.10 |
| The number of AAL2 cells dropped due to invalid
OSF (OffSet Field) in the egress direction.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcInvParCells |
1.3.6.1.4.1.9.9.407.1.1.2.1.11 |
| The number of AAL2 cells dropped due to invalid
parity bit field in the egress direction.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcCpsInvCidPkts |
1.3.6.1.4.1.9.9.407.1.1.2.1.12 |
| The number of AAL2 CPS packets dropped in the
egress direction due to invalid CID(Channel Identifier).
The CID may be considered as invalid if it is out of
range or not configured.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcCpsInvUuiPkts |
1.3.6.1.4.1.9.9.407.1.1.2.1.13 |
| The number of AAL2 CPS packets dropped in the
egress direction due to invalid UUI field.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal2PvcCpsInvLenPkts |
1.3.6.1.4.1.9.9.407.1.1.2.1.14 |
| The number of AAL2 CPS packets dropped in the
egress direction due to invalid length field.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcHistoryTable |
1.3.6.1.4.1.9.9.407.1.1.3 |
| This table represents a 24 hour history of
statistics per AAL5 PVC. The statistics are collected
using 15 minute intervals.
Entries in this table are populated at the
end of the interval.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CatsAal5PvcHistoryEntry |
|
| catsAal5PvcHistoryEntry |
1.3.6.1.4.1.9.9.407.1.1.3.1 |
| An entry in the table. Each entry contains the
statistics for a particular AAL5 PVC for the given
15 minute interval.
The primary index, ifIndex, will be of ifType propAtm(197),
atm(37) or aal5(49).
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CatsAal5PvcHistoryEntry |
|
|
| catsAal5PvcVpi |
1.3.6.1.4.1.9.9.407.1.1.3.1.1 |
| The VPI value for the AAL5 PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVpIdentifier |
|
|
| catsAal5PvcVci |
1.3.6.1.4.1.9.9.407.1.1.3.1.2 |
| The VCI value for the AAL5 PVC for which the
statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVcIdentifier |
|
|
| catsAal5PvcIntervalIndex |
1.3.6.1.4.1.9.9.407.1.1.3.1.3 |
| This is the history interval number.
The intervals are 15 minutes long and thus for
a 24 hour period there will be 96 intervals.
The 24 hour interval is aligned to wall clock.
The index of 1 will represent the interval from
00:00 to 00:15. The index of 2 will represent the
interval from 00:15 to 00:30 and so on.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..96 |
|
| catsAal5PvcValidFlag |
1.3.6.1.4.1.9.9.407.1.1.3.1.4 |
| This object is used to indicate if the entry has
valid statistics data. It contains a value of
true(1) if the data is valid and false(2) otherwise.
A possible scenario when this flag will be set
to false(2) is when there are time changes due to
daylight savings time and/ or time zone changes.
This flag can also be set to false(2) if
statistics in this 15 minute interval have
experienced discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| catsAal5PvcDiscontinuityTime |
1.3.6.1.4.1.9.9.407.1.1.3.1.5 |
| This object will represent the timestamp when the
statistics in this 15 minute interval were
discontinued due to a forced clear on the module.
If this has the default value then it indicates
that the statistics in this interval have not
experienced any discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| catsAal5PvcPduSentPkts |
1.3.6.1.4.1.9.9.407.1.1.3.1.6 |
| The number of AAL5 PDUs transmitted to the network.
This is applicable only to the PVCs configured as
AAL5 PVCs (VoIP(Voice Over IP) PVCs or
CCS PVCs in the case of VoAAL2 application).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcPduRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.3.1.7 |
| The number of AAL5 PDUs received from the network.
This is applicable only to the PVCs configured as
AAL5 PVCs (VoIP(Voice Over IP) PVCs or
CCS(Common Channel Signaling) PVCs in the case of
VoAAL2 application).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcInvCpiPdus |
1.3.6.1.4.1.9.9.407.1.1.3.1.8 |
| The number of AAL5 PDUs dropped in the egress direction
due to invalid CPI(Common Part Indicator) field in the
AAL5 PDU trailer. This is applicable only to the PVCs
configured as AAL5 PVCs (VoIP(Voice Over IP) PVCs or
CCS(Common Channel Signaling) PVCs in the case of
VoAAL2 application).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcOverSizedSDUs |
1.3.6.1.4.1.9.9.407.1.1.3.1.9 |
| The number AAL5 PDUs discarded on this AAL5 PVC at the
interface associated with an AAL5 entity because the
AAL5 SDUs were too large.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcInvLenPdus |
1.3.6.1.4.1.9.9.407.1.1.3.1.10 |
| The number of AAL5 PDUs dropped due to length
violations. This is applicable to CCS PVCs.
The HDLC frames should have a minimum frame size
in order for the proper interpretation by the upper
layer protocol.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcCrc32ErrorPdus |
1.3.6.1.4.1.9.9.407.1.1.3.1.11 |
| The number of AAL5 PDUs dropped in the egress
direction due to CRC-32 errors detected by the
SAR.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsAal5PvcReassemTimerExpiryPdus |
1.3.6.1.4.1.9.9.407.1.1.3.1.12 |
| The number of AAL5 PDU reassembly timer expirations.
The timers are maintained in the egress direction
for building an AAL5 PDU from the cells.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidHistoryTable |
1.3.6.1.4.1.9.9.407.1.1.4 |
| This table represents a 24 hour history of
statistics per CID. The statistics are collected
using 15 minute intervals.
The Channel IDentification (CID) is the standard
term to identify an ATM AAL2 connection (ITU-T I.366.2).
CID is unique within a VC (SVC or PVC).
Entries in this table are populated at the
end of the interval.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
CatsCidHistoryEntry |
|
| catsCidHistoryEntry |
1.3.6.1.4.1.9.9.407.1.1.4.1 |
| An entry in the table. Each entry contains the
statistics for a particular CID for the given 15
minute interval.
The primary index, ifIndex, will be of ifType propAtm(197),
atm(37) or aal2(37).
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CatsCidHistoryEntry |
|
|
| catsCidVpi |
1.3.6.1.4.1.9.9.407.1.1.4.1.1 |
| The VPI value of the ATM trunk connection with the CID
for which the statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVpIdentifier |
|
|
| catsCidVci |
1.3.6.1.4.1.9.9.407.1.1.4.1.2 |
| The VCI value of the ATM trunk connection with the CID
for which the statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
AtmVcIdentifier |
|
|
| catsCid |
1.3.6.1.4.1.9.9.407.1.1.4.1.3 |
| This object is the CID of an ATM AAL2 connection
for which the statistics are being collected.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..2147483647 |
|
| catsCidIntervalIndex |
1.3.6.1.4.1.9.9.407.1.1.4.1.4 |
| This is the history interval number.
The intervals are 15 minutes long and thus for
a 24 hour period there will be 96 intervals.
The 24 hour interval is aligned to wall clock.
The index of 1 will represent the interval from
00:00 to 00:15. The index of 2 will represent the
interval from 00:15 to 00:30 and so on.
|
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
1..96 |
|
| catsCidValidFlag |
1.3.6.1.4.1.9.9.407.1.1.4.1.5 |
| This object is used to indicate if the entry has
valid statistics data. It will take a value of
true(1) if the data is valid and false(2) otherwise.
A possible scenario when this flag will be set
to false(2) is when there are time changes due to
daylight savings time and/ or time zone changes.
This flag can also be set to false(2) if
statistics in this 15 minute interval have
experienced discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| catsCidDiscontinuityTime |
1.3.6.1.4.1.9.9.407.1.1.4.1.6 |
| This object will represent the timestamp when the
statistics in this 15 minute interval were
discontinued due to a forced clear on the module.
If this has the default value then it indicates
that the statistics in this interval have not
experienced any discontinuity.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TimeStamp |
|
|
| catsCidAvgSentPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.7 |
| This attribute defines the average packets per second
sent towards the network in this 15 minute interval.
The average is computed by dividing the total
number of packets sent over this 15 minute interval
by the interval time (15 minutes).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidAvgRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.8 |
| This attribute defines the average packets per second
received from the network in this 15 minute interval.
The average is computed by dividing the total
number of packets received over this 15 minute interval
by the interval time (15 minutes).
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidSentPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.9 |
| This attribute defines the count of packets sent
towards the network in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.10 |
| This attribute defines the count of packets
received from the network in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidSentOctets |
1.3.6.1.4.1.9.9.407.1.1.4.1.11 |
| This attribute defines the count of bytes sent
towards the network in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidRcvdOctets |
1.3.6.1.4.1.9.9.407.1.1.4.1.12 |
| This attribute defines the count of bytes
received from the network in this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidSentPeakPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.13 |
| This attribute defines the peak packets per
second sent towards the network in this 15 minute
interval.
The sent packets per second are monitored
every second and the peak value over the 15
minute interval is returned in this object.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidRcvdPeakPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.14 |
| This attribute defines the peak packets per
second received from the network in this 15
minute interval.
The received packets per second are monitored
every second and the peak value over the 15
minute interval is returned in this object.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtAISRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.15 |
| This object contains the number of external
AIS AAL2 Type3 packets received in this 15
minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtConnAISRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.17 |
| This object contains the number of external connection
AIS AAL2 Type2 packets received in this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtConnRDIRcvdPkts |
1.3.6.1.4.1.9.9.407.1.1.4.1.18 |
| This object contains the number of External Connection
RDI (Remote Defect Ind.) AAL2 Type2 packets received
in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtAISRcvCnts |
1.3.6.1.4.1.9.9.407.1.1.4.1.19 |
| This object contains the count of external AIS AAL2
Type3 packets received in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtConnAISCnts |
1.3.6.1.4.1.9.9.407.1.1.4.1.21 |
| This object contains count of external connection
AIS AAL2 Type2 packets received in this 15 minute
interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtConnRDICnts |
1.3.6.1.4.1.9.9.407.1.1.4.1.22 |
| This object contains the count of external connection
RDI (Remote Defect Ind.) AAL2 Type2 packets received
in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| catsCidExtAISXmtCnts |
1.3.6.1.4.1.9.9.407.1.1.4.1.23 |
| This object contains the count of external AIS AAL2
Type3 packets transmitted in this 15 minute interval.
|
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| ciscoAtmPvcStatMIBCompliance |
1.3.6.1.4.1.9.9.407.2.2.1 |
| Compliance statement for CISCO-ATM-TRUNK-STAT-MIB. |
| Status: deprecated |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| ciscoAtmPvcStatMIBComplianceRev1 |
1.3.6.1.4.1.9.9.407.2.2.2 |
| Compliance statement for CISCO-ATM-TRUNK-STAT-MIB. |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| catsPvcStatGroup |
1.3.6.1.4.1.9.9.407.2.1.1 |
| A collection of objects used for maintaining history
statistics per PVC.
|
| Status: deprecated |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| catsAal2PvcStatGroup |
1.3.6.1.4.1.9.9.407.2.1.2 |
| A collection of objects used for maintaining history
statistics per AAL2 PVC.
|
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| catsAal5PvcStatGroup |
1.3.6.1.4.1.9.9.407.2.1.3 |
| A collection of objects used for maintaining history
statistics per AAL5 PVC.
|
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| catsCidHistoryStatGroup |
1.3.6.1.4.1.9.9.407.2.1.4 |
| A collection of objects used for maintaining history
statistics per CID.
|
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| catsPvcStatGroupRev1 |
1.3.6.1.4.1.9.9.407.2.1.5 |
| A collection of objects used for maintaining history
statistics per PVC.
|
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|