CISCO-ATM-QOS-MIB

File: CISCO-ATM-QOS-MIB.mib (30623 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-CONF	SNMPv2-TC
IF-MIB	ATM-MIB	ATM-FORUM-TC-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Unsigned32
Integer32	MODULE-COMPLIANCE	OBJECT-GROUP
TEXTUAL-CONVENTION	ifIndex	atmVplVpi
atmVclVpi	atmVclVci	AtmServiceCategory
ciscoMgmt

Defined Types

VcParamConfigLocation
The configuration source of a vc parameter: 1 - Not configured - using default 2 - Configured on vc directly 3 - VC-class configured on vc 4 - VC-class configured on sub-interface 5 - VC-class configured on main-interface.
TEXTUAL-CONVENTION
	INTEGER	configDefault(1), configVcDirect(2), configVcClass(3), configVcClassSubInterface(4), configVcClassInterface(5)

VpState
States of virtual path: 1 - Inactive 2 - Active
TEXTUAL-CONVENTION
	INTEGER	vpStateInactive(1), vpStateActive(2)

CaqVccParamsEntry
SEQUENCE
	caqVccParamsType	AtmServiceCategory
	caqVccParamsPcrIn0	Unsigned32
	caqVccParamsPcrIn01	Unsigned32
	caqVccParamsPcrOut0	Unsigned32
	caqVccParamsPcrOut01	Unsigned32
	caqVccParamsScrIn0	Unsigned32
	caqVccParamsScrIn01	Unsigned32
	caqVccParamsScrOut0	Unsigned32
	caqVccParamsScrOut01	Unsigned32
	caqVccParamsBcsIn0	Unsigned32
	caqVccParamsBcsIn01	Unsigned32
	caqVccParamsBcsOut0	Unsigned32
	caqVccParamsBcsOut01	Unsigned32
	caqVccParamsInheritLevel	VcParamConfigLocation
	caqVccParamsMcrIn	Unsigned32
	caqVccParamsMcrOut	Unsigned32
	caqVccParamsInvRdf	Unsigned32
	caqVccParamsInvRif	Unsigned32
	caqVccParamsRfl	VcParamConfigLocation
	caqVccParamsCdv	Unsigned32
	caqVccParamsCdvt	Unsigned32
	caqVccParamsIcr	Unsigned32
	caqVccParamsTbe	Unsigned32
	caqVccParamsFrtt	Unsigned32
	caqVccParamsNrm	Unsigned32
	caqVccParamsInvTrm	Unsigned32
	caqVccParamsInvCdf	Unsigned32
	caqVccParamsAdtf	Unsigned32

CaqVpcParamsEntry
SEQUENCE
	caqVpcParamsVpState	VpState
	caqVpcParamsPeakRate	Unsigned32
	caqVpcParamsCesRate	Unsigned32
	caqVpcParamsDataVcCount	Integer32
	caqVpcParamsCesVcCount	Integer32
	caqVpcParamsVcdF4Seg	Integer32
	caqVpcParamsVcdF4Ete	Integer32
	caqVpcParamsScr	Unsigned32
	caqVpcParamsMbs	Unsigned32
	caqVpcParamsAvailBw	Unsigned32

CaqQueuingParamsEntry
SEQUENCE
	caqQueuingParamsMeanQDepth	Unsigned32

CaqQueuingParamsClassEntry
SEQUENCE
	caqQueuingParamsClassIndex	Integer32
	caqQueuingParamsClassRandDrp	Unsigned32
	caqQueuingParamsClassTailDrp	Unsigned32
	caqQueuingParamsClassMinThre	Unsigned32
	caqQueuingParamsClassMaxThre	Unsigned32
	caqQueuingParamsClassMrkProb	Unsigned32

Defined Values

ciscoAtmQosMIB		1.3.6.1.4.1.9.9.279
The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a per-VP basis 3. Per-VC queuing/buffering Although the initial requirements of the MIB are driven to support the GSR TAZ line card, CISCO-ATM-QOS-MIB is designed as a generic MIB to support ATM interfaces across all platforms. Here are the tables defined in this MIB: ciscoAtmQosVccTable - to provide information on traffic shaping on a per-VC basis. ciscoAtmQosVpcTable - to provide information on traffic shaping on a per-VP basis. ciscoAtmQosVcQueuingTable ciscoAtmQosVcQueuingClassTable - to provide information on per-VC queuing/buffering.
MODULE-IDENTITY

ciscoAtmQosMIBNotifs		1.3.6.1.4.1.9.9.279.0
OBJECT IDENTIFIER

ciscoAtmQosMIBObjects		1.3.6.1.4.1.9.9.279.1
OBJECT IDENTIFIER

ciscoAtmQosMIBConform		1.3.6.1.4.1.9.9.279.2
OBJECT IDENTIFIER

caqVccParams		1.3.6.1.4.1.9.9.279.1.1
OBJECT IDENTIFIER

caqVpcParams		1.3.6.1.4.1.9.9.279.1.2
OBJECT IDENTIFIER

caqQueuingParams		1.3.6.1.4.1.9.9.279.1.3
OBJECT IDENTIFIER

caqVccParamsTable		1.3.6.1.4.1.9.9.279.1.1.1
This table is defined to provide QoS information for each active ATM VC existing on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CaqVccParamsEntry

caqVccParamsEntry		1.3.6.1.4.1.9.9.279.1.1.1.1
This list contains the ATM QoS parameters provided by ciscoAtmQosVccEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CaqVccParamsEntry

caqVccParamsType		1.3.6.1.4.1.9.9.279.1.1.1.1.1
The service category of this virtual circuit connection.
Status: current	Access: read-write
OBJECT-TYPE
	AtmServiceCategory

caqVccParamsPcrIn0		1.3.6.1.4.1.9.9.279.1.1.1.1.2
Input Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsPcrIn01		1.3.6.1.4.1.9.9.279.1.1.1.1.3
Number of OAM F5 end to end loopback cells sent through the VCC.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsPcrOut0		1.3.6.1.4.1.9.9.279.1.1.1.1.4
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsPcrOut01		1.3.6.1.4.1.9.9.279.1.1.1.1.5
Output Peak Cell Rate (PCR) in kbps with Cell Loss Priority bit set to 1 (clp01).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsScrIn0		1.3.6.1.4.1.9.9.279.1.1.1.1.6
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsScrIn01		1.3.6.1.4.1.9.9.279.1.1.1.1.7
Input Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsScrOut0		1.3.6.1.4.1.9.9.279.1.1.1.1.8
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsScrOut01		1.3.6.1.4.1.9.9.279.1.1.1.1.9
Output Sustained Cell Rate (SCR) in kbps for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsBcsIn0		1.3.6.1.4.1.9.9.279.1.1.1.1.10
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsBcsIn01		1.3.6.1.4.1.9.9.279.1.1.1.1.11
Input Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsBcsOut0		1.3.6.1.4.1.9.9.279.1.1.1.1.12
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 0 (clp0).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsBcsOut01		1.3.6.1.4.1.9.9.279.1.1.1.1.13
Output Burst Cell Size (BCS) for connection with VBR type of QoS and Cell Loss Priority bit set to 1 (clp01).
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsInheritLevel		1.3.6.1.4.1.9.9.279.1.1.1.1.14
The source of configuration for peak cell rate.
Status: current	Access: read-only
OBJECT-TYPE
	VcParamConfigLocation

caqVccParamsMcrIn		1.3.6.1.4.1.9.9.279.1.1.1.1.15
Input Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsMcrOut		1.3.6.1.4.1.9.9.279.1.1.1.1.16
Output Minimum Cell Rate (MCR) in kbps for connection with VBR-nrt or ABR type of QoS.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsInvRdf		1.3.6.1.4.1.9.9.279.1.1.1.1.17
Inverse of rate decrease factor.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsInvRif		1.3.6.1.4.1.9.9.279.1.1.1.1.18
Inverse of rate increase factor.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsRfl		1.3.6.1.4.1.9.9.279.1.1.1.1.19
The source of configuration for rate factor.
Status: current	Access: read-only
OBJECT-TYPE
	VcParamConfigLocation

caqVccParamsCdv		1.3.6.1.4.1.9.9.279.1.1.1.1.20
Cell delay variation.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqVccParamsCdvt		1.3.6.1.4.1.9.9.279.1.1.1.1.21
Cell delay variation tolerance.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsIcr		1.3.6.1.4.1.9.9.279.1.1.1.1.22
Initial cell rate.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsTbe		1.3.6.1.4.1.9.9.279.1.1.1.1.23
Transient buffer exposure.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsFrtt		1.3.6.1.4.1.9.9.279.1.1.1.1.24
Fixed round-trip time.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsNrm		1.3.6.1.4.1.9.9.279.1.1.1.1.25
Maximum number of tx cells for each forward rm cell.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsInvTrm		1.3.6.1.4.1.9.9.279.1.1.1.1.26
Maximum time between forward rm cells.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsInvCdf		1.3.6.1.4.1.9.9.279.1.1.1.1.27
Inverse of cutoff decrease factor.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVccParamsAdtf		1.3.6.1.4.1.9.9.279.1.1.1.1.28
Allowed cell rate decrease time factor.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

caqVpcParamsTable		1.3.6.1.4.1.9.9.279.1.2.1
This table is defined to provide QoS information for each active ATM VP existing on the interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CaqVpcParamsEntry

caqVpcParamsEntry		1.3.6.1.4.1.9.9.279.1.2.1.1
This list contains the ATM QoS parameters provided by ciscoAtmQosVpcEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	CaqVpcParamsEntry

caqVpcParamsVpState		1.3.6.1.4.1.9.9.279.1.2.1.1.1
VP state of the current permanent virtual path.
Status: current	Access: read-only
OBJECT-TYPE
	VpState

caqVpcParamsPeakRate		1.3.6.1.4.1.9.9.279.1.2.1.1.2
Maximum rate in kbps at which the associated permanent virtual path can transmit data.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqVpcParamsCesRate		1.3.6.1.4.1.9.9.279.1.2.1.1.3
Maximum rate in kbps at which CES VCs can transmit data with the associated permanent virtual path.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqVpcParamsDataVcCount		1.3.6.1.4.1.9.9.279.1.2.1.1.4
Number of data VCs currently associated with the permanent virtual path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

caqVpcParamsCesVcCount		1.3.6.1.4.1.9.9.279.1.2.1.1.5
Number of CES VCs currently associated with the permanent virtual path.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

caqVpcParamsVcdF4Seg		1.3.6.1.4.1.9.9.279.1.2.1.1.6
Vcd for F4 OAM segment processing.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

caqVpcParamsVcdF4Ete		1.3.6.1.4.1.9.9.279.1.2.1.1.7
Vcd for F4 OAM end to end processing.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..65535

caqVpcParamsScr		1.3.6.1.4.1.9.9.279.1.2.1.1.8
Sustained cell rate associated with the PVP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqVpcParamsMbs		1.3.6.1.4.1.9.9.279.1.2.1.1.9
Maximum burst size associated with the PVP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqVpcParamsAvailBw		1.3.6.1.4.1.9.9.279.1.2.1.1.10
Bandwidth in Kbps currently currently available on this PVP.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsTable		1.3.6.1.4.1.9.9.279.1.3.1
This table provides queuing related information for a VC existing on an ATM interface.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CaqQueuingParamsEntry

caqQueuingParamsEntry		1.3.6.1.4.1.9.9.279.1.3.1.1
This is defined as an entry in caqQueuingParamsTable.
Status: current	Access: not-accessible
OBJECT-TYPE
	CaqQueuingParamsEntry

caqQueuingParamsMeanQDepth		1.3.6.1.4.1.9.9.279.1.3.1.1.1
Mean Queue Depth associated with the vc. This value is calculated based on the actual queue depth on the interface and the exponential weighting constant.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsClassTable		1.3.6.1.4.1.9.9.279.1.3.2
This table provides queuing information for all queuing classes associating with a VC.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CaqQueuingParamsClassEntry

caqQueuingParamsClassEntry		1.3.6.1.4.1.9.9.279.1.3.2.1
This is defined as an entry in ciscoAtmQosVcQueuingClassTable to provide queuing information of a specific class.
Status: current	Access: not-accessible
OBJECT-TYPE
	CaqQueuingParamsClassEntry

caqQueuingParamsClassIndex		1.3.6.1.4.1.9.9.279.1.3.2.1.1
A class index, which associates with an IP precedence (0 to 8), is defined to reference individual caqQueuingParamsClassEntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	0..8

caqQueuingParamsClassRandDrp		1.3.6.1.4.1.9.9.279.1.3.2.1.2
Number of packets dropped when Mean Queue Length is between Minimum Threshold and Maximum Threshold range.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsClassTailDrp		1.3.6.1.4.1.9.9.279.1.3.2.1.3
Number of packets dropped because the Mean Queue Depth exceeds the Maximum Threshold value.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsClassMinThre		1.3.6.1.4.1.9.9.279.1.3.2.1.4
Minimum Threshold value in kbps.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsClassMaxThre		1.3.6.1.4.1.9.9.279.1.3.2.1.5
Maximum Threshold value in kbps.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

caqQueuingParamsClassMrkProb		1.3.6.1.4.1.9.9.279.1.3.2.1.6
Mark probability denominator. This is the value used in the calculation of a packet being dropped when the average queue size is between the minimum threshold and the maximum threshold.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

ciscoAtmQosMIBCompliances		1.3.6.1.4.1.9.9.279.2.1
OBJECT IDENTIFIER

ciscoAtmQosMIBGroups		1.3.6.1.4.1.9.9.279.2.2
OBJECT IDENTIFIER

ciscoAtmQosMIBCompliance		1.3.6.1.4.1.9.9.279.2.1.1
The compliance statement for entities which implement this Cisco ATM QoS MIB.
Status: current	Access: read-only
MODULE-COMPLIANCE

ciscoAtmQosVccGroup		1.3.6.1.4.1.9.9.279.2.2.1
A collection of objects providing per-VC ATM QoS related info.
Status: current	Access: read-only
OBJECT-GROUP

ciscoAtmQosVccAddon1Group		1.3.6.1.4.1.9.9.279.2.2.2
Add-on objects providing per-VC ATM QoS related info.
Status: current	Access: read-only
OBJECT-GROUP

ciscoAtmQosVpcGroup		1.3.6.1.4.1.9.9.279.2.2.3
A collection of objects providing per-VP ATM QoS related info.
Status: current	Access: read-only
OBJECT-GROUP

ciscoAtmQosVpcAddon1Group		1.3.6.1.4.1.9.9.279.2.2.4
Add-on objects providing per-VP ATM QoS related info.
Status: current	Access: read-only
OBJECT-GROUP

ciscoAtmQosVcQueuingGroup		1.3.6.1.4.1.9.9.279.2.2.5
A collection of objects providing per-VC queuing/buffering related info.
Status: current	Access: read-only
OBJECT-GROUP