CISCO-ATM-CONN-INFO-MIB

File: CISCO-ATM-CONN-INFO-MIB.mib (23728 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
CISCO-SMI SNMPv2-TC

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Gauge32
Unsigned32 MODULE-COMPLIANCE OBJECT-GROUP
ifIndex ciscoMgmt TEXTUAL-CONVENTION

Defined Types

CaciGeneralConnEPCategory  
General category for connection or endpoint types supported on the switch. caciP2p : Point to point connection caciP2mpR : Point to multi point root connection caciP2mpL : Point to multi point leaf connection caciP2mpPty: Point to multi point party connection
TEXTUAL-CONVENTION    
  INTEGER caciP2p(1), caciP2mpR(2), caciP2mpL(3), caciP2mpPty(4)  

CaciP2pConnCategory  
The connection category. caciP2pSvcc : Point to point Svc connection caciP2pSvpc : Point to point Svpc connection caciP2pSpvcD: Point to point Spvc DAX connection caciP2pSpvpD: Point to point Spvp DAX connection caciP2pSpvcR: Point to point SPVC Routed connection caciP2pSpvpR: Point to point Spvp Routed connection
TEXTUAL-CONVENTION    
  INTEGER caciP2pSvcc(1), caciP2pSvpc(2), caciP2pSpvcD(3), caciP2pSpvpD(4), caciP2pSpvcR(5), caciP2pSpvpR(6)  

CaciP2pEndpointCategory  
The terminating endpoint category. caciP2pSpvcRPEP : Point to point Spvc Routed Persistent endpoint caciP2pSpvcRNPEP: Point to point Spvc Routed Non-persistent endpoint caciP2pSpvpRPEP : Point to point Spvp Routed Persistent endpoint caciP2pSpvpRNPEP: Point to point Spvp Routed Non-persistent endpoint caciP2pSpvcDEP : Point to point Spvc DAX endpoint caciP2pSpvpDEP : Point to point Spvp DAX endpoint
TEXTUAL-CONVENTION    
  INTEGER caciP2pSpvcRPEP(1), caciP2pSpvcRNPEP(2), caciP2pSpvpRPEP(3), caciP2pSpvpRNPEP(4), caciP2pSpvcDEP(5), caciP2pSpvpDEP(6)  

CaciP2pIntEndpointCategory  
The intermediate endpoint category. caciP2pSvccIntEP : Point to point Svc intermediate endpoint caciP2pSvpcIntEP : Point to point Svpc intermediate endpoint caciP2pSpvcRIntEP: Point to point Spvc Routed intermediate endpoint caciP2pSpvpRIntEP: Point to point Spvp Routed intermediate endpoint
TEXTUAL-CONVENTION    
  INTEGER caciP2pSvccIntEP(1), caciP2pSvpcIntEP(2), caciP2pSpvcRIntEP(3), caciP2pSpvpRIntEP(4)  

CaciP2mpConnCategory  
The point to multipoint connection category. caciP2mpSvcRoot : Point to multipoint Svc root connection caciP2mpSvcLeaf : Point to multipoint Svc leaf connection caciP2mpSvcParty : Point to multipoint Svc party connection caciP2mpSvpcRoot : Point to multipoint Svpc root connection caciP2mpSvpcLeaf : Point to multipoint Svpc leaf connection caciP2mpSvpcParty: Point to multipoint Svpc party connection caciP2mpSpvcP : Point to multipoint Spvc persistent connection caciP2mpSpvcNP : Point to multipoint Spvc non-persistent connection caciP2mpSpvcAct : Point to multipoint Spvc Active connection caciP2mpSpvpP : Point to multipoint Spvp persistent connection caciP2mpSpvpNP : Point to multipoint Spvp non-persistent connection caciP2mpSpvpAct : Point to multipoint Spvp active connection caciP2mpSpvcPaP : Point to multipoint Spvc party persistent connection caciP2mpSpvcPaAct: Point to multipoint Spvc party active connection caciP2mpSpvpPaP : Point to multipoint Spvp party persistent connection caciP2mpSpvpPaAct: Point to multipoint Spvp party active connection
TEXTUAL-CONVENTION    
  INTEGER caciP2mpSvcRoot(1), caciP2mpSvcLeaf(2), caciP2mpSvcParty(3), caciP2mpSvpcRoot(4), caciP2mpSvpcLeaf(5), caciP2mpSvpcParty(6), caciP2mpSpvcP(7), caciP2mpSpvcNP(8), caciP2mpSpvcAct(9), caciP2mpSpvpP(10), caciP2mpSpvpNP(11), caciP2mpSpvpAct(12), caciP2mpSpvcPaP(13), caciP2mpSpvcPaAct(14), caciP2mpSpvpPaP(15), caciP2mpSpvpPaAct(16)  

CaciATMEndpointCategory  
The connection category. caciTotalSpvc : Total SPVC endpoints configured on the ATM switch caciP2pTotalInt : Total intermediate endpoints configured on the ATM switch caciTotalMaster : Total master endpoints configured on the ATM switch caciTotalSlave : Total slave endpoints configured on the ATM switch
TEXTUAL-CONVENTION    
  INTEGER caciTotalSpvc(1), caciP2pTotalInt(2), caciTotalMaster(3), caciTotalSlave(4)  

CaciGenericEndpointEntry  
SEQUENCE    
  caciATMEndpointCategory CaciATMEndpointCategory
  caciTotalEndpoints Gauge32

CaciConnInfoEntry  
SEQUENCE    
  caciGeneralConnEPCategory CaciGeneralConnEPCategory
  caciNumUsedConns Gauge32

CaciP2pConnEntry  
SEQUENCE    
  caciP2pConnectionCategory CaciP2pConnCategory
  caciP2pTotalConns Gauge32

CaciP2pEndpointEntry  
SEQUENCE    
  caciP2pEndptCategory CaciP2pEndpointCategory
  caciP2pTotalConfEndpoints Gauge32

CaciP2pIntEndpointEntry  
SEQUENCE    
  caciP2pIntEndptCategory CaciP2pIntEndpointCategory
  caciP2pTotalIntEndpoints Gauge32

CaciP2mpConnEntry  
SEQUENCE    
  caciP2mpConnectionCategory CaciP2mpConnCategory
  caciP2mpTotalConfConns Gauge32

Defined Values

ciscoAtmConnInfoMIB 1.3.6.1.4.1.9.9.9999
The MIB module for providing the parameters configured on an ATM interface. Terminologies used: SVC : Switched Virtual Channel SPVC : Soft Permanent Virtual Circuit SPVP : Soft Permanent Virtual Path SVPC : Switched Virtual Path Connection DAX : Connection with endpoints on the same ATM switch P2p : Point-to-point connection P2mp : Point-to-multi-point connection Root : The root of point-to-multipoint connection, which is associated with a VPI/VCI Leaf : Usually one point-to-multipoint connection consists of one root and one or more leaves. Leaf is the branch point for point to multipoint connection that is associated with a VPI/VCI Party: One or more party is associated with each leaf, all parties are associated with the same VPI/VCI that its leaf belongs to Source Via Node Destination ------- ------- ------- A| |B C| |D E| |F --+-----+----------+-----+------------+-----+-- | | | | | | ------- ------- ------- Each active connection has two terminating endpoints. In the above diagram, Endpoints A and F are terminating. Of these the master endpoint of the connection initiates the routing of the call and is considered the calling party. The slave endpoint is the called party which receives calls and is the destination of a call. Any endpoints that are created either on Via nodes or on the node with the terminating endpoint in order to have a complete connections between endpoints A and F are said to be intermediate endpoints. In the above diagram, endpoints B, C, D and E are intermediate endpoints.
MODULE-IDENTITY    

caciMIBNotifications 1.3.6.1.4.1.9.9.9999.0
OBJECT IDENTIFIER    

caciMIBObjects 1.3.6.1.4.1.9.9.9999.1
OBJECT IDENTIFIER    

caciAtmConnInfo 1.3.6.1.4.1.9.9.9999.1.1
OBJECT IDENTIFIER    

caciIfInfo 1.3.6.1.4.1.9.9.9999.1.1.1
OBJECT IDENTIFIER    

caciP2pConns 1.3.6.1.4.1.9.9.9999.1.1.2
OBJECT IDENTIFIER    

caciP2pEndpoints 1.3.6.1.4.1.9.9.9999.1.1.3
OBJECT IDENTIFIER    

caciP2pIntEndpoints 1.3.6.1.4.1.9.9.9999.1.1.4
OBJECT IDENTIFIER    

caciP2mpConns 1.3.6.1.4.1.9.9.9999.1.1.5
OBJECT IDENTIFIER    

caciGeneric 1.3.6.1.4.1.9.9.9999.1.1.6
OBJECT IDENTIFIER    

caciP2pTotalConfConns 1.3.6.1.4.1.9.9.9999.1.1.6.1
This object specifies the total point to point connections that are configured on this ATM switch.
OBJECT-TYPE    
  Unsigned32  

caciP2pMaxPossibleConns 1.3.6.1.4.1.9.9.9999.1.1.6.2
This object specifies the upper limit of the point to point and point to multipoint connections that are allowed to be configured on this ATM switch.
OBJECT-TYPE    
  Unsigned32  

caciMaxPossibleEndpoints 1.3.6.1.4.1.9.9.9999.1.1.6.3
This object specifies the upper limit of all the possible endpoints that are allowed to be configured on this ATM switch.
OBJECT-TYPE    
  Unsigned32  

caciGenericEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.6.4
The table contains number of connection per CaciATMEndpointCategory.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciGenericEndpointEntry

caciGenericEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.6.4.1
An entry in the table specifying the number of connections for the corresponding CaciATMEndpointCategory.
OBJECT-TYPE    
  CaciGenericEndpointEntry  

caciATMEndpointCategory 1.3.6.1.4.1.9.9.9999.1.1.6.4.1.1
Endpoint category corresponding to CaciATMEndpointCategory.
OBJECT-TYPE    
  CaciATMEndpointCategory  

caciTotalEndpoints 1.3.6.1.4.1.9.9.9999.1.1.6.4.1.2
The total number of endpoints of caciATMEndpointCategory configured on this ATM switch.
OBJECT-TYPE    
  Gauge32  

caciConnInfoTable 1.3.6.1.4.1.9.9.9999.1.1.1.1
The Connection Statistics table. This table has the number of connections per interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciConnInfoEntry

caciConnInfoEntry 1.3.6.1.4.1.9.9.9999.1.1.1.1.1
An entry in the caciConnInfoTable. Each entry in ifTable with ifType values: atm(37), atmLogical(80) or atmVirtual(149) has an associated entry in this table.
OBJECT-TYPE    
  CaciConnInfoEntry  

caciGeneralConnEPCategory 1.3.6.1.4.1.9.9.9999.1.1.1.1.1.1
The general connection or endpoint category on this ATM switch.
OBJECT-TYPE    
  CaciGeneralConnEPCategory  

caciNumUsedConns 1.3.6.1.4.1.9.9.9999.1.1.1.1.1.2
This object specifies the total number of used connections of type caciGeneralConnEPCategory on this interface.
OBJECT-TYPE    
  Gauge32  

caciP2pConnTable 1.3.6.1.4.1.9.9.9999.1.1.2.1
The table contains number of connection per CaciP2pConnCategory.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciP2pConnEntry

caciP2pConnEntry 1.3.6.1.4.1.9.9.9999.1.1.2.1.1
An entry in the table specifying the number of connections for the corresponding CaciP2pConnCategory.
OBJECT-TYPE    
  CaciP2pConnEntry  

caciP2pConnectionCategory 1.3.6.1.4.1.9.9.9999.1.1.2.1.1.1
The connection category.
OBJECT-TYPE    
  CaciP2pConnCategory  

caciP2pTotalConns 1.3.6.1.4.1.9.9.9999.1.1.2.1.1.2
The total number of P2p connections of type CaciP2pConnCategory configured on this ATM switch.
OBJECT-TYPE    
  Gauge32  

caciP2pEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.3.1
The table contains number of endpoints per CaciP2pEndpointCategory.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciP2pEndpointEntry

caciP2pEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.3.1.1
An entry in the table specifying the number of endpoints for the corresponding CaciP2pEndpointCategory.
OBJECT-TYPE    
  CaciP2pEndpointEntry  

caciP2pEndptCategory 1.3.6.1.4.1.9.9.9999.1.1.3.1.1.1
The point to point endpoint category.
OBJECT-TYPE    
  CaciP2pEndpointCategory  

caciP2pTotalConfEndpoints 1.3.6.1.4.1.9.9.9999.1.1.3.1.1.2
The number of total P2p enpoints of type CaciP2pEndpointCategory configured on this ATM switch.
OBJECT-TYPE    
  Gauge32  

caciP2pIntEndpointTable 1.3.6.1.4.1.9.9.9999.1.1.4.1
The table contains number of endpoints per CaciP2pIntEndpointCategory.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciP2pIntEndpointEntry

caciP2pIntEndpointEntry 1.3.6.1.4.1.9.9.9999.1.1.4.1.1
An entry in the table specifying the number of endpoints for the corresponding CaciP2pIntEndpointCategory.
OBJECT-TYPE    
  CaciP2pIntEndpointEntry  

caciP2pIntEndptCategory 1.3.6.1.4.1.9.9.9999.1.1.4.1.1.1
The point to point intermediate endpoint category.
OBJECT-TYPE    
  CaciP2pIntEndpointCategory  

caciP2pTotalIntEndpoints 1.3.6.1.4.1.9.9.9999.1.1.4.1.1.2
The total number of P2p intermediate enpoints of type CaciP2pIntEndpointCategory present on this ATM switch.
OBJECT-TYPE    
  Gauge32  

caciP2mpConnTable 1.3.6.1.4.1.9.9.9999.1.1.5.1
The table contains number of connection per CaciP2mpConnCategory.
OBJECT-TYPE    
  SEQUENCE OF  
    CaciP2mpConnEntry

caciP2mpConnEntry 1.3.6.1.4.1.9.9.9999.1.1.5.1.1
An entry in the table specifying the number of connections for the corresponding CaciP2mpConnCategory.
OBJECT-TYPE    
  CaciP2mpConnEntry  

caciP2mpConnectionCategory 1.3.6.1.4.1.9.9.9999.1.1.5.1.1.1
The point to multi point connection category.
OBJECT-TYPE    
  CaciP2mpConnCategory  

caciP2mpTotalConfConns 1.3.6.1.4.1.9.9.9999.1.1.5.1.1.2
The total number of P2mp connections of type CaciP2mpConnCategory configured on this ATM switch.
OBJECT-TYPE    
  Gauge32  

ciscoAtmConnInfoMIBConformance 1.3.6.1.4.1.9.9.9999.2
OBJECT IDENTIFIER    

ciscoAtmConnInfoMIBCompliances 1.3.6.1.4.1.9.9.9999.2.1
OBJECT IDENTIFIER    

ciscoAtmConnInfoMIBGroups 1.3.6.1.4.1.9.9.9999.2.2
OBJECT IDENTIFIER    

ciscoAtmConnInfoMIBCompliance 1.3.6.1.4.1.9.9.9999.2.1.1
The Compliance statement for ciscoAtm management group.
MODULE-COMPLIANCE    

ciscoConnInfoConfMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.1
Objects used for representing connection statistical details about an interface.
OBJECT-GROUP    

ciscoP2pConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.2
Objects used for representing the point to point connections of a particular CaP2pConnCategory.
OBJECT-GROUP    

ciscoP2pEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.3
Objects used for representing the point to point endpoints of a particular CaP2pEndpointCategory.
OBJECT-GROUP    

ciscoP2pIntEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.4
Objects used for representing the point to point intermediate endpoints of a particular CaP2pIntEndpointCategory.
OBJECT-GROUP    

ciscoP2mpConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.5
Objects used for representing the point to multi point connections of a particular CaP2mpConnCategory.
OBJECT-GROUP    

ciscoTotalConnsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.6
Objects used for representing the total connections on the ATM switch.
OBJECT-GROUP    

ciscoTotalEndpointsMIBGroup 1.3.6.1.4.1.9.9.9999.2.2.7
Objects used for representing the total endpoints on the ATM switch.
OBJECT-GROUP