CISCO-ACCESS-ENVMON-MIB

File: CISCO-ACCESS-ENVMON-MIB.mib (6636 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF CISCO-ENVMON-MIB
CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
MODULE-COMPLIANCE OBJECT-GROUP ciscoEnvMonSupplyStatusEntry
ciscoEnvMonTemperatureStatusDescr ciscoEnvMonTemperatureState ciscoEnvMonVoltageStatusDescr
ciscoEnvMonVoltageState ciscoMgmt

Defined Types

CaemSupplyStatusEntry  
SEQUENCE    
  caemSupplyFailedComponent INTEGER

Defined Values

ciscoAccessEnvMonMIB 1.3.6.1.4.1.9.9.61
The MIB module to describe the additional status of the Environmental Monitor on those Cisco Access devices which support one.
MODULE-IDENTITY    

caemObjects 1.3.6.1.4.1.9.9.61.1
OBJECT IDENTIFIER    

caemSupplyStatusTable 1.3.6.1.4.1.9.9.61.1.1
The table contains the additional power supply information that are not covered in the ciscoEnvMonSupplyStatusTable of CISCO-ENVMON-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CaemSupplyStatusEntry

caemSupplyStatusEntry 1.3.6.1.4.1.9.9.61.1.1.1
Additional information about the failure component or location in the power Supply beyond that provided by Cisco Environmental Monitor MIB's ciscoEnvMonSupplyStatusEntry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CaemSupplyStatusEntry  

caemSupplyFailedComponent 1.3.6.1.4.1.9.9.61.1.1.1.1
The failure component of the power supply being instrumented. none - No failure. inputVoltage - Input power lost in one of the power supplies dcOutputVoltage - DC output voltage lost in one of the power supplies thermal - Power supply thermal failure. multiple - Multiple failures. fan - Fan failure overvoltage - Over voltage.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), inputVoltage(2), dcOutputVoltage(3), thermal(4), multiple(5), fan(6), overvoltage(7)  

caemMIBNotificationPrefix 1.3.6.1.4.1.9.9.61.2
OBJECT IDENTIFIER    

caemMIBNotifications 1.3.6.1.4.1.9.9.61.2.0
OBJECT IDENTIFIER    

caemTemperatureNotification 1.3.6.1.4.1.9.9.61.2.0.1
A caemTemperatureNotification is sent if the over temperature condition is detected in the managed system. This is a replacement for the ciscoEnvMonTemperatureNotification trap because the information 'ciscoEnvMonTemperatureStatusValue' required by the trap is not available in the managed system.
Status: current Access: read-only
NOTIFICATION-TYPE    

caemVoltageNotification 1.3.6.1.4.1.9.9.61.2.0.2
A caemVoltageNotification is sent if the over voltage condition is detected and ciscoEnvMonVoltageState is not set to 'notPresent' in the managed system. This is a replacement for the ciscoEnvMonVoltageNotification trap because the information 'ciscoEnvMonVoltageStatusValue' required by the trap is not available in the managed system.
Status: current Access: read-only
NOTIFICATION-TYPE    

caemConformance 1.3.6.1.4.1.9.9.61.3
OBJECT IDENTIFIER    

caemCompliances 1.3.6.1.4.1.9.9.61.3.1
OBJECT IDENTIFIER    

caemGroups 1.3.6.1.4.1.9.9.61.3.2
OBJECT IDENTIFIER    

caemCompliance 1.3.6.1.4.1.9.9.61.3.1.1
The compliance statement for entities which implement the Cisco Environmental Monitor Supplemental MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

caemGroup 1.3.6.1.4.1.9.9.61.3.2.1
A collection of objects providing the additional Environmental Monitor information beyond that provided by Cisco Environmental Monitor MIB.
Status: current Access: read-only
OBJECT-GROUP