CISCO-AAA-SESSION-MIB

File: CISCO-AAA-SESSION-MIB.mib (15001 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB CISCO-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
Gauge32 IpAddress Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP DisplayString
TruthValue TEXTUAL-CONVENTION RowPointer
InterfaceIndexOrZero ciscoMgmt

Defined Types

CctCallId  
Represents a Call Identifier. The call identifier is used as an unique identifier for an call within the system. A zero value indicates no call ID.
TEXTUAL-CONVENTION    
  Unsigned32  

CasnSessionId  
Represents an Accounting Session Identifier. The session identifier is used as an unique identifier for a session within the system.
TEXTUAL-CONVENTION    
  Unsigned32 1..4294967295  

CasnActiveEntry  
SEQUENCE    
  casnSessionId CasnSessionId
  casnUserId DisplayString
  casnIpAddr IpAddress
  casnIdleTime Gauge32
  casnDisconnect TruthValue
  casnCallTrackerId CctCallId
  casnNasPort RowPointer
  casnVaiIfIndex InterfaceIndexOrZero

Defined Values

ciscoAAASessionMIB 1.3.6.1.4.1.9.9.150
This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. References: RFC 2139 RADIUS Accounting The TACACS+ Protocol Version 1.78, Internet Draft
MODULE-IDENTITY    

casnMIBObjects 1.3.6.1.4.1.9.9.150.1
OBJECT IDENTIFIER    

casnActive 1.3.6.1.4.1.9.9.150.1.1
OBJECT IDENTIFIER    

casnGeneral 1.3.6.1.4.1.9.9.150.1.2
OBJECT IDENTIFIER    

casnActiveTableEntries 1.3.6.1.4.1.9.9.150.1.1.1
Number of entries currently in casnActiveTable
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

casnActiveTableHighWaterMark 1.3.6.1.4.1.9.9.150.1.1.2
Maximum number of entries present in casnActiveTable since last system re-initialization. This corresponds to the maximum value reported by casnActiveTableEntries.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

casnActiveTable 1.3.6.1.4.1.9.9.150.1.1.3
This table contains entries for active AAA accounting sessions in the system.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CasnActiveEntry

casnActiveEntry 1.3.6.1.4.1.9.9.150.1.1.3.1
The information regarding a single accounting session. Entries are created when a new accounting session is begun. Entries are removed when the accounting session is ended. Initiating termination of a session with the object casnDisconnect will cause removal of the entry when the session completes termination.
Status: current Access: not-accessible
OBJECT-TYPE    
  CasnActiveEntry  

casnSessionId 1.3.6.1.4.1.9.9.150.1.1.3.1.1
This is the session identification used by the accounting protocol. This value is unique to a session within the system, even if multiple accounting protocols are in use. The value of this object corresponds to these accounting protocol attributes. RADIUS: attribute 44, Acct-Session-Id TACACS+: attribute 'task_id'
Status: current Access: not-accessible
OBJECT-TYPE    
  CasnSessionId  

casnUserId 1.3.6.1.4.1.9.9.150.1.1.3.1.2
The User login ID or zero length string if unavailable. The value of this object corresponds to these accounting protocol attributes. RADIUS: attribute 1, User-Name TACACS+: attribute 'user'
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

casnIpAddr 1.3.6.1.4.1.9.9.150.1.1.3.1.3
The IP address of the session or 0.0.0.0 if not applicable or unavailable. RADIUS: attribute 8, Framed-IP-Address TACACS+: attribute 'addr'
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

casnIdleTime 1.3.6.1.4.1.9.9.150.1.1.3.1.4
The elapsed time that this session has been idle. This is the time since the last user-level data has been received or transmitted. Protocol level handshaking associated with the call is considered to be idle for this object.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

casnDisconnect 1.3.6.1.4.1.9.9.150.1.1.3.1.5
This object is used to terminate this session. Setting the value to true(1) will initiate termination of this session. The entry will be removed once the session has completed termination. Once this object has been set to true(1), the session termination process can not be cancelled by setting the value false(2).
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

casnCallTrackerId 1.3.6.1.4.1.9.9.150.1.1.3.1.6
The value of this object is the entry index in the CISCO-CALL-TRACKER-MIB cctActiveTable of the call corresponding to this accounting session. Using the value of this object to query the cctActiveTable will provide more detailed data regarding the session represented by this casnActiveEntry.
Status: current Access: read-only
OBJECT-TYPE    
  CctCallId  

casnNasPort 1.3.6.1.4.1.9.9.150.1.1.3.1.7
The value of this object identifies a particular conceptual row associated with the session identified by casnSessionId. The conceptual row that this object points to represents a port that is used to transport a session. If the port transporting the session cannot be determined, the value of this object will be zeroDotZero. For example, suppose a session is established using an ATM PVC. If the ifIndex of the ATM interface is 7, and the VPI/VCI values of the PVC are 1, 100 respectively, then the value of this object might be as follows: casnNasPort.15 = atmVclAdminStatus.7.1.100 ^ ^ ^ ^ | | | | casnSessionId --+ | | | ifIndex -------------------------+ | | atmVclVpi ---------------------------+ | atmVclVci ------------------------------+ where atmVclAdminStatus is the first accessible object of the atmVclTable of the ATM-MIB.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

casnVaiIfIndex 1.3.6.1.4.1.9.9.150.1.1.3.1.8
The ifIndex of the Virtual Access Interface (VAI) that is associated with the PPP session. This interface may not be represented in the IF-MIB in which case the value of this object will be zero.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndexOrZero  

casnTotalSessions 1.3.6.1.4.1.9.9.150.1.2.1
Total number of sessions since last system re-initialization. This value includes all sessions currently in the casnActiveTable and all previous sessions whether terminated via casnDisconnect or via other mechanisms.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

casnDisconnectedSessions 1.3.6.1.4.1.9.9.150.1.2.2
Total number of sessions which have been disconnected using casnDisconnect since last system re-initialization. This value includes any sessions still in the casnActiveTable with a casnDisconnect value of true(1) and all previous sessions which terminated as a result of setting casnDisconnect.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

casnMIBNotificationPrefix 1.3.6.1.4.1.9.9.150.2
OBJECT IDENTIFIER    

casnMIBNotifications 1.3.6.1.4.1.9.9.150.2.1
OBJECT IDENTIFIER    

casnMIBConformance 1.3.6.1.4.1.9.9.150.3
OBJECT IDENTIFIER    

casnMIBCompliances 1.3.6.1.4.1.9.9.150.3.1
OBJECT IDENTIFIER    

casnMIBGroups 1.3.6.1.4.1.9.9.150.3.2
OBJECT IDENTIFIER    

casnMIBCompliance 1.3.6.1.4.1.9.9.150.3.1.1
The compliance statement for entities which implement the CISCO AAA Session MIB
Status: deprecated Access: read-only
MODULE-COMPLIANCE    

casnMIBComplianceRev1 1.3.6.1.4.1.9.9.150.3.1.2
The compliance statement for entities which implement the CISCO AAA Session MIB
Status: current Access: read-only
MODULE-COMPLIANCE    

casnActiveGroup 1.3.6.1.4.1.9.9.150.3.2.1
A collection of objects providing the AAA session information.
Status: current Access: read-only
OBJECT-GROUP    

casnGeneralGroup 1.3.6.1.4.1.9.9.150.3.2.2
A collection of objects providing the AAA session information.
Status: current Access: read-only
OBJECT-GROUP    

casnActiveGroupSup1 1.3.6.1.4.1.9.9.150.3.2.3
A collection of objects that supplements the casnActiveGroup.
Status: current Access: read-only
OBJECT-GROUP