CIG-CLIENTS-MIB

Imported modules

SNMPv2-CONF	SNMPv2-SMI	SNMPv2-TC
RFC1155-SMI

Imported symbols

OBJECT-GROUP	NOTIFICATION-GROUP	MODULE-COMPLIANCE
Integer32	Unsigned32	enterprises
Gauge32	Counter32	OBJECT-TYPE
MODULE-IDENTITY	NOTIFICATION-TYPE	RowStatus
TEXTUAL-CONVENTION	TruthValue	DateAndTime
TimeInterval	DisplayString	IpAddress

Defined Types

CigDhcpClientsEntry
SEQUENCE
	cigDhcpClientsIfIndex	INTEGER
	cigDhcpClientsRowStatus	RowStatus
	cigDhcpClientsIfAlias	DisplayString
	cigDhcpClientsIPAddress	IpAddress
	cigDhcpClientsSubnetMask	IpAddress
	cigDhcpClientsClientId	OCTET STRING
	cigDhcpClientsHostName	DisplayString
	cigDhcpClientsRequestLeaseTime	Unsigned32
	cigDhcpClientsReceiveLeaseTime	Unsigned32
	cigDhcpClientsRemainLeaseTime	Unsigned32
	cigDhcpClientsRenewLeaseTime	Unsigned32
	cigDhcpClientsRebindLeaseTime	Unsigned32
	cigDhcpClientsDefaultGatewayList	DisplayString
	cigDhcpClientsDnsServerList	DisplayString
	cigDhcpClientsDomainName	DisplayString
	cigDhcpClientsServerIpAddr	IpAddress
	cigDhcpClientsOperations	INTEGER
	cigDhcpClientsStatus	INTEGER
	cigDhcpClientsRequestBitmap	OCTET STRING
	cigDhcpClientsDefaultRouterTrackId	Unsigned32

CigDnsResolverDnsServersListEntry
SEQUENCE
	cigDnsResolverDnsServersListIndex	INTEGER
	cigDnsResolverDnsServersListDescription	DisplayString
	cigDnsResolverDnsServersListRowStatus	RowStatus

CigDnsResolverDnsServerEntry
SEQUENCE
	cigDnsResolverDnsServerListIndex	INTEGER
	cigDnsResolverDnsServerIndex	INTEGER
	cigDnsResolverDnsServerIpAddress	IpAddress
	cigDnsResolverDnsServerIfIndex	INTEGER
	cigDnsResolverDnsServerType	INTEGER
	cigDnsResolverDnsServerRowStatus	RowStatus

CigDnsResolverDomainEntry
SEQUENCE
	cigDnsResolverDomainIndex	INTEGER
	cigDnsResolverDomain	DisplayString
	cigDnsResolverDomainRowStatus	RowStatus

Defined Values

cigClients		1.3.6.1.4.1.6889.2.1.17
This module defines the cig Clients. The first client in the DHCP client used for getting dynamic IP address and configuration parameters from DHCP server.The DHCP client will be a function of interfaces. The second client is DNS resolver client. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
MODULE-IDENTITY

avaya		1.3.6.1.4.1.6889
OBJECT IDENTIFIER

mibs		1.3.6.1.4.1.6889.2
OBJECT IDENTIFIER

lsg		1.3.6.1.4.1.6889.2.1
OBJECT IDENTIFIER

cigDhcpClients		1.3.6.1.4.1.6889.2.1.17.1
OBJECT IDENTIFIER

cigDnsResolver		1.3.6.1.4.1.6889.2.1.17.2
OBJECT IDENTIFIER

cigDhcpClientsNotification		1.3.6.1.4.1.6889.2.1.17.1.0
OBJECT IDENTIFIER

cigDhcpClientsConflictDetectionTrap		1.3.6.1.4.1.6889.2.1.17.1.0.1
DHCP IP address conflict detection. This trap is based on: The Client Decline Packets after the client sent gratuitous Arp and get response which implies that another station use this IP address.
Status: current	Access: read-write
NOTIFICATION-TYPE

cigDhcpClientsTable		1.3.6.1.4.1.6889.2.1.17.1.1
cigDhcpClientsTable parameters. Used for DHCP clients which gathered dynamic IP addresses and configuration from DHCP servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDhcpClientsEntry

cigDhcpClientsEntry		1.3.6.1.4.1.6889.2.1.17.1.1.1
cigDhcpClients Entry Parameters.
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDhcpClientsEntry

cigDhcpClientsIfIndex		1.3.6.1.4.1.6889.2.1.17.1.1.1.1
A unique value for each interface. This value is same as ifIndex from ifTable. The DHCP client can be enabled on Vlan and on WAN Fast Ethernet interfaces.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDhcpClientsRowStatus		1.3.6.1.4.1.6889.2.1.17.1.1.1.2
This is a row status mib item For adding and deleting DHCP clients interfaces. For configuring only DHCP client parameters use create and wait for specific interface. When activating the DHCP client, activate the row. Activating the row will create a new row in the ipDynamic Table in CROUTE-MIB that presents dynamic ipInterface. Deactivating the DHCP client will cause to erasing the row in the ipDynamic Mib table and deactivating the DHCP client row in order to keep the specific DHCP parameters which already were configured.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDhcpClientsIfAlias		1.3.6.1.4.1.6889.2.1.17.1.1.1.3
This object is an 'alias' name for the lower-layer interface on top of which this IP interface is defined. It is the same as the ifAlias from the standard interface table.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

cigDhcpClientsIPAddress		1.3.6.1.4.1.6889.2.1.17.1.1.1.4
The IP address received from remote peer during the DHCP session. This is the same MIB item as ipInterface table in CROUTE-MIB.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cigDhcpClientsSubnetMask		1.3.6.1.4.1.6889.2.1.17.1.1.1.5
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0. In case of DHCP client this is DHCP option 1 == Subnet Mask. This is the same MIB item as ipInterface table in CROUTE-MIB.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cigDhcpClientsClientId		1.3.6.1.4.1.6889.2.1.17.1.1.1.6
Client identifier used for manual leased. The structure of the client identifier is as follows: combination of TYPE and Data. Where Type = 01 if for Ethernet MACs and Data for this case if Ethernet MAC address. The user can use also other client identifiers as strings. Default: '' - 01:Interface MAC address.
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(0..80)

cigDhcpClientsHostName		1.3.6.1.4.1.6889.2.1.17.1.1.1.7
Host name is sent by the DHCP client as Dhcp option 12. It is specifically used by part of DHCP servers (MS2000) to identify the client in the binding file (more user intuitive). This option is used as well by part of the DHCP server with the support of DHCP client (sending option 81) to update the DNS server with the new IP for specific host. The format of the string can be: 'usernameA'. The hostname shall comply to RFC 1035 naming convention with the following exceptions: a. allow digits at the start of the name. b. Do not check length constraints of 63 bytes. The default of the host name used by the DHCP client is the device host name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..80)

cigDhcpClientsRequestLeaseTime		1.3.6.1.4.1.6889.2.1.17.1.1.1.8
The Requested leased time in seconds. Infinite is defined as 0xffffffff. 0 - used to present that no lease time requested from the DHCP server. I.e. option 51 will not be sent by the client. Default 0 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDhcpClientsReceiveLeaseTime		1.3.6.1.4.1.6889.2.1.17.1.1.1.9
The received leased time from the DHCP server in seconds. Infinite is defined as 0xffffffff. Default 0 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpClientsRemainLeaseTime		1.3.6.1.4.1.6889.2.1.17.1.1.1.10
The remains leased time in seconds . Infinite is defined as 0xffffffff. Default 0 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpClientsRenewLeaseTime		1.3.6.1.4.1.6889.2.1.17.1.1.1.11
The time defined for renewing phase in seconds . Infinite is defined as 0xffffffff. It is defined as 0.5 of the receive lease. Default 0 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpClientsRebindLeaseTime		1.3.6.1.4.1.6889.2.1.17.1.1.1.12
The time defined for rebinding phase in seconds . Infinite is defined as 0xffffffff. It is defined as 0.875 of the receive lease. Default 0 seconds.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

cigDhcpClientsDefaultGatewayList		1.3.6.1.4.1.6889.2.1.17.1.1.1.13
Default Gateway is Dhcp option 3. Default = '' = Null String. The format of the string can be up to 8 IP addresses in the list, for example: '121.23.1.12 135.64.13.190 192.123.242.230'
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

cigDhcpClientsDnsServerList		1.3.6.1.4.1.6889.2.1.17.1.1.1.14
DNS Server is Dhcp option 6. Default = '' = Null String. The format of the string can be up to 8 IP addresses in the list, for exapmle: '121.23.1.12 135.64.13.190 192.123.242.230'
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

cigDhcpClientsDomainName		1.3.6.1.4.1.6889.2.1.17.1.1.1.15
DNS Server is Dhcp option 15. Default = Null String The format of the string can be: 'avaya' There is no ability to configure this option in the general option table.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

cigDhcpClientsServerIpAddr		1.3.6.1.4.1.6889.2.1.17.1.1.1.16
The DHCP server IP address that the client gets from it the IP address allocation and keep requesting for lease extension from it. In case no IP address is gathered from DHCP server then value is 0.0.0.0. Default 0.0.0.0.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

cigDhcpClientsOperations		1.3.6.1.4.1.6889.2.1.17.1.1.1.17
Used for instruct the DHCP client to perfrom release or renew operations.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(1), release(2), renew(3)

cigDhcpClientsStatus		1.3.6.1.4.1.6889.2.1.17.1.1.1.18
The status of the DHCP client. Select - Sending DISCOVER packets Request - Requesting IP address after selecting from all the offer packets. Bound - Receiving ACK packet and there is no conflict detection by sending ARP packets. Rebind - After 0.875 out of the lease time the renewal phase enter to rebind. Renew - After 0.5 out of the lease time the device try to renew the lease until 0.875 of the lease time. Release - The client release the lease. Decline - The client detect IP conflict by sending ARP packet. Idle - The client did not get IP address and keep trying after an Idle time (~40 seconds) to reach new IP address.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	select(1), request(2), bound(3), rebind(4), renew(5), release(6), decline(7), reboot(8), idle(9), notSupported(255)

cigDhcpClientsRequestBitmap		1.3.6.1.4.1.6889.2.1.17.1.1.1.19
Each bit of this value set to '1' indicates a specific requested DHCP option (Bitmap of 255 options represented by 32Bytes). When the bit is set to '1' then specific DHCP option is requested by the client. Subnet mask bit 1 - is always requested. Bits are numbered from the most-significant leftmost bit in the octet (bit 0) to the least-significant rightmost bit (bit 7). Numbering continues across octets, so that octet 1 bit 0 is called bit 8. Default: '0x5201' which equals to: bit 1 - Subnet mask (Always requested!) Bit 3 - Default routers Bit 6 - DNS servers Bit 15 - Domain Name
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(1..32)

cigDhcpClientsDefaultRouterTrackId		1.3.6.1.4.1.6889.2.1.17.1.1.1.20
Bind the status of the DHCP default router to an object-tracker by specifying the ID of the object-tracker (avstrTrackerId in AVAYA-SAA-TRACK-MIB). A value of 0 means that the default router is not bound to any object-tracker. A value of 0xffffffff is notSupported feature for the relevant default router.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDnsResolverGenConfig		1.3.6.1.4.1.6889.2.1.17.2.1
OBJECT IDENTIFIER

cigDnsResolverMode		1.3.6.1.4.1.6889.2.1.17.2.1.1
Enable the DNS resolver in the device. Default = True (Enable).
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

cigDnsResolverRetry		1.3.6.1.4.1.6889.2.1.17.2.1.2
The number of retries for each query for specific DNS server when there is timeout. The range is 0-100.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDnsResolverTimeout		1.3.6.1.4.1.6889.2.1.17.2.1.3
The timeout in seconds for each query for specific DNS server. The range is 1-3600 seconds.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

cigDnsResolverOperations		1.3.6.1.4.1.6889.2.1.17.2.1.4
Used for specific operations for DNS server. clearDynamicServers(2) will clear all the dynamic servers (learnt from PPP interfaces and DHCP clients) from DNS server list.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(1), clearDynamicServers(2)

cigDnsResolverDnsServersListTable		1.3.6.1.4.1.6889.2.1.17.2.2
Lists of DNS servers. The default list(1) includes all the static DNS server and the dynamic DNS servers from the DHCP clients/PPP interfaces as PPPoE and Dial out modem.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDnsResolverDnsServersListEntry

cigDnsResolverDnsServersListEntry		1.3.6.1.4.1.6889.2.1.17.2.2.1
The DNS servers list. Lists of DNS servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDnsResolverDnsServersListEntry

cigDnsResolverDnsServersListIndex		1.3.6.1.4.1.6889.2.1.17.2.2.1.1
The index of the list of DNS servers. Default list index is 1. The user will not be able to create lists other then default list at the first release.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDnsResolverDnsServersListDescription		1.3.6.1.4.1.6889.2.1.17.2.2.1.2
This is the list description. Default for DNS list #1: 'DNS list #1'
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

cigDnsResolverDnsServersListRowStatus		1.3.6.1.4.1.6889.2.1.17.2.2.1.3
This is a row status mib item For adding and deleting DNS server lists. The user will not be able to create lists other then list 1 at the first release.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDnsResolverDnsServerTable		1.3.6.1.4.1.6889.2.1.17.2.3
DNS servers. The user can configure up to 6 static servers located in places 1-6. The other indexes are of dynamic servers which can not be created (learnt automatically by the device) but can be erased. The indexes 1-99 are for static servers (only the first 6 are configurable). The indexes 100-199 are for dynamic servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDnsResolverDnsServerEntry

cigDnsResolverDnsServerEntry		1.3.6.1.4.1.6889.2.1.17.2.3.1
The DNS server entry. The user can configure up to 6 static servers located in places 1-6. The other indexes are of dynamic servers which can not be created (learnt automatically by the device) but can be erased. The indexes 1-99 are for static servers (only the first 6 are configurable). The indexes 100-199 are for dynamic servers.
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDnsResolverDnsServerEntry

cigDnsResolverDnsServerListIndex		1.3.6.1.4.1.6889.2.1.17.2.3.1.1
The index of the list of DNS servers. Default list index is 1. The user will not be able to create lists other then default list at the first release.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDnsResolverDnsServerIndex		1.3.6.1.4.1.6889.2.1.17.2.3.1.2
The index of DNS server in the list of DNS servers. The index presents the preference of the server. The lower the index the higher priority to use it.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDnsResolverDnsServerIpAddress		1.3.6.1.4.1.6889.2.1.17.2.3.1.3
The DNS server IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

cigDnsResolverDnsServerIfIndex		1.3.6.1.4.1.6889.2.1.17.2.3.1.4
A unique value for each interface. This value is same as ifIndex from ifTable. This field is used when the DNS server is learnt from interface running DHCP client or PPP negotiated (PPPoE/Dial Out modem). This field has no valid value when the type of the DNS server is static.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDnsResolverDnsServerType		1.3.6.1.4.1.6889.2.1.17.2.3.1.5
This is the server type. The user can create new row only when the server type is static. dynamic-dhcp represents DNS server learnt from DHCP client. dynamic-ppp represents DNS server learnt from ppp interface (PPPoE/Dial out modem).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	static(1), dynamic-dhcp(2), dynamic-ppp(3)

cigDnsResolverDnsServerRowStatus		1.3.6.1.4.1.6889.2.1.17.2.3.1.6
This is a row status mib item For adding and deleting DNS servers. The user can add only static servers in locations 1-6. For static servers the operation suppported is CreateAndWait and dynamic servers are automatically created by the device.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

cigDnsResolverDomainTable		1.3.6.1.4.1.6889.2.1.17.2.4
The domains used by the DNS resolver to add to non full qualified names. I.e. when the host name is not a full host name then these domains are added in order to resolve the non full qulified name. an example for domain is : avaya.com. an example for non qualified name is lantis. Therefore when trying to resolve lantis the suffix avaya.com will be added to create the name lantis.avaya.com
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		CigDnsResolverDomainEntry

cigDnsResolverDomainEntry		1.3.6.1.4.1.6889.2.1.17.2.4.1
The Domain entry. The domains used by the DNS resolver to add to non full qualified names. I.e. when the host name is not a full host name then these domains are added in order to resolve the non full qulified name. an example for domain is : avaya.com. an example for non qualified name is lantis. Therefore when trying to resolve lantis the suffix avaya.com will be added to create the name lantis.avaya.com
Status: current	Access: not-accessible
OBJECT-TYPE
	CigDnsResolverDomainEntry

cigDnsResolverDomainIndex		1.3.6.1.4.1.6889.2.1.17.2.4.1.1
The index of the domain. The index presents the precedence of the domain. I.e. the lower the index the higher priority this domain is used.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

cigDnsResolverDomain		1.3.6.1.4.1.6889.2.1.17.2.4.1.2
The Domain shall follow RFC 1035 Host name convention. The following syntax will result in fewer problems with many applications that use domain names (e.g., mail, TELNET). Note that while upper and lower case letters are allowed in domain names, no significance is attached to the case. That is, two names with the same spelling but different case are to be treated as if identical. The labels must follow the rules for ARPANET host names. They must start with a letter, end with a letter or digit, and have as interior characters only letters, digits, and hyphen. There are also some restrictions on the length. Labels must be 63 characters or less. For example, the following strings identify hosts in the Internet: A.ISI.EDU XX.LCS.MIT.EDU SRI-NIC.ARPA
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

cigDnsResolverDomainRowStatus		1.3.6.1.4.1.6889.2.1.17.2.4.1.3
This is a row status mib item For adding and deleting domains. The row is created by CreateAndWait.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus