CIENA-CES-MPLS-MIB

File: CIENA-CES-MPLS-MIB.mib (372669 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IANA-ADDRESS-FAMILY-NUMBERS-MIB
CIENA-TC CIENA-SMI CIENA-GLOBAL-MIB
MPLS-TC-STD-MIB

Imported symbols

TimeTicks Counter32 Integer32
Unsigned32 IpAddress OBJECT-TYPE
MODULE-IDENTITY NOTIFICATION-TYPE TruthValue
DisplayString MacAddress TEXTUAL-CONVENTION
RowStatus RowPointer StorageType
TimeStamp AddressFamilyNumbers CienaGlobalState
cienaCesConfig cienaCesNotifications cienaGlobalSeverity
cienaGlobalMacAddress MplsBitRate

Defined Types

TTLPolicy  
TTL Policy
TEXTUAL-CONVENTION    
  INTEGER decrement(0), fixed(1), inherit(2)  

PseudoWireType  
Pseudo Wire Type
TEXTUAL-CONVENTION    
  INTEGER raw(1), tagged(2)  

RCosPolicy  
Resolved Cos Policy
TEXTUAL-CONVENTION    
  INTEGER fixed(1), exp-mapped(2)  

FCosPolicy  
Frame Cos Policy
TEXTUAL-CONVENTION    
  INTEGER fixed(1), rcos-mapped(2)  

PrivateForwardGroup  
Private Forwarding Group
TEXTUAL-CONVENTION    
  INTEGER groupA(1), groupB(2), groupC(3)  

OperState  
Virtual Circuit Opererational State.
TEXTUAL-CONVENTION    
  INTEGER capable(1), not-capable(2)  

VCFailReason  
Virtual Circuit Failure Reason
TEXTUAL-CONVENTION    
  INTEGER indeterminate(1), ignore(2)  

VCStatus  
VC Status. This is used for both local and remote status faults
TEXTUAL-CONVENTION    
  BITS notForwarding(0), servicePwRxFault(1), servicePwTxFault(2), psnPwIngressRxFault(3), psnPwEgressTxFault(4), pwStandby(5)  

VCState  
Current VC state
TEXTUAL-CONVENTION    
  INTEGER active(1), notActive(2)  

AttachGroupType  
Attach Group Type
TEXTUAL-CONVENTION    
  INTEGER static(1), dynamic(2)  

TunnelType  
Transport tunnel types for MPLS VC
TEXTUAL-CONVENTION    
  INTEGER mplsStaticIngress(1), mplsDynamicIngress(2), mplsAssociated(3), gmplsStaticIngressCorouted(4), gmplsDynamicIngressCorouted(5), gmplsStaticEgressCorouted(6), gmplsDynamicEgressCorouted(7), gmplsAssociated(8)  

TunnelAisFault  
This is replaced by TunnelOamFault.
TEXTUAL-CONVENTION    
  INTEGER fault(1), nofault(2)  

TunnelOamFault  
Oam fault status on the tunnel.
TEXTUAL-CONVENTION    
  INTEGER aisfault(1), bfdfault(2), aisbfdfault(3), nofault(4)  

AutoSizeFailHdlr  
Auto size failure handler.
TEXTUAL-CONVENTION    
  INTEGER none(1), alarm(2), mbb(3), notApplicable(4)  

AutoSizeState  
Auto size dynamic states.
TEXTUAL-CONVENTION    
  INTEGER ok(1), upsizeInProgress(2), upsizeFailed(3), downsizeInProgress(4), downsizeFailed(5), notApplicable(6)  

AutoSizeMode  
Auto size mode.
TEXTUAL-CONVENTION    
  INTEGER none(1), cac(2), utilization(3), notApplicable(4)  

CacPolicy  
MPLS Class Profile Cac Policy
TEXTUAL-CONVENTION    
  INTEGER invalid(1), mam(2), rdm(3)  

PathDisjointType  
Tunnel Path Disjoint Type
TEXTUAL-CONVENTION    
  INTEGER unknown(1), none(2), link(3), srlg(4), node(5), srlgAndNode(6), srlgOrNode(7), notApplicable(8)  

PathDisjointMode  
Tunnel Path Disjoint Mode
TEXTUAL-CONVENTION    
  INTEGER none(1), strict(2), maximal(3), notApplicable(4)  

SRLGState  
SRLG state
TEXTUAL-CONVENTION    
  INTEGER active(1), inActive(2)  

TEMode  
TE mode
TEXTUAL-CONVENTION    
  INTEGER diffServ(1), diffServ-Te(2)  

MplsGlobalState  
This textual convention enumerates the administrative and operational state with not applicable value.
TEXTUAL-CONVENTION    
  INTEGER enabled(1), disabled(2), notApplicable(3)  

CienaCesMplsStaticIngressTunnelEntry  
SEQUENCE    
  cienaCesMplsStaticIngressTunnelIndex Unsigned32
  cienaCesMplsStaticIngressTunnelName DisplayString
  cienaCesMplsStaticIngressTunnelWeight INTEGER
  cienaCesMplsStaticIngressTunnelNextHopIp IpAddress
  cienaCesMplsStaticIngressTunnelAdminState CienaGlobalState
  cienaCesMplsStaticIngressTunnelOperState CienaGlobalState
  cienaCesMplsStaticIngressTunnelDestIpAddr IpAddress
  cienaCesMplsStaticIngressTunnelLabel INTEGER
  cienaCesMplsStaticIngressTunnelFrmCosPolicy FCosPolicy
  cienaCesMplsStaticIngressTunnelFrmCosMapId INTEGER
  cienaCesMplsStaticIngressTunnelFixedExp Unsigned32
  cienaCesMplsStaticIngressTunnelTTLPolicy TTLPolicy
  cienaCesMplsStaticIngressTunnelFixedTTL Unsigned32
  cienaCesMplsStaticIngressTunnelGrpIndex Unsigned32
  cienaCesMplsStaticIngressTunnelReversion INTEGER
  cienaCesMplsStaticIngressTunnelReversionTimeout INTEGER
  cienaCesMplsStaticIngressTunnelPrimaryTunnelName DisplayString
  cienaCesMplsStaticIngressTunnelFixedTC Unsigned32
  cienaCesMplsStaticIngressTunnelProtectionRole INTEGER
  cienaCesMplsStaticIngressTunnelProtectionState INTEGER
  cienaCesMplsStaticIngressTunnelProtectionPartnerName DisplayString
  cienaCesMplsStaticIngressTunnelCosProfileIndex INTEGER
  cienaCesMplsStaticIngressTunnelCosProfileName DisplayString
  cienaCesMplsStaticIngressTunnelRecoveryDisjoint INTEGER

CienaCesMplsDynamicIngressTunnelEntry  
SEQUENCE    
  cienaCesMplsDynamicIngressTunnelIndex Unsigned32
  cienaCesMplsDynamicIngressTunnelName DisplayString
  cienaCesMplsDynamicIngressTunnelWeight INTEGER
  cienaCesMplsDynamicIngressTunnelLspId Unsigned32
  cienaCesMplsDynamicIngressTunnelNextHopIp IpAddress
  cienaCesMplsDynamicIngressTunnelAdminState CienaGlobalState
  cienaCesMplsDynamicIngressTunnelOperState CienaGlobalState
  cienaCesMplsDynamicIngressTunnelDestIpAddr IpAddress
  cienaCesMplsDynamicIngressTunnelLabel INTEGER
  cienaCesMplsDynamicIngressTunnelFrmCosPolicy INTEGER
  cienaCesMplsDynamicIngressTunnelFrmCosMapId INTEGER
  cienaCesMplsDynamicIngressTunnelFixedExp Unsigned32
  cienaCesMplsDynamicIngressTunnelSetupPriority Unsigned32
  cienaCesMplsDynamicIngressTunnelHoldPriority Unsigned32
  cienaCesMplsDynamicIngressTunnelRecordRoute INTEGER
  cienaCesMplsDynamicIngressTunnelFastRoute INTEGER
  cienaCesMplsDynamicIngressTunnelTTLPolicy INTEGER
  cienaCesMplsDynamicIngressTunnelPathIndex Unsigned32
  cienaCesMplsDynamicIngressTunnelPathName DisplayString
  cienaCesMplsDynamicIngressTunnelFixedTTL Unsigned32
  cienaCesMplsDynamicIngressTunnelGrpIndex Unsigned32
  cienaCesMplsDynamicIngressTunnelResourcePointer RowPointer
  cienaCesMplsDynamicIngressTunnelReversion INTEGER
  cienaCesMplsDynamicIngressTunnelReversionTimeout INTEGER
  cienaCesMplsDynamicIngressTunnelBandwidthProfile DisplayString
  cienaCesMplsDynamicIngressTunnelPrimaryTunnelName DisplayString
  cienaCesMplsDynamicIngressTunnelFixedTC Unsigned32
  cienaCesMplsDynamicIngressTunnelProtectionRole INTEGER
  cienaCesMplsDynamicIngressTunnelProtectionState INTEGER
  cienaCesMplsDynamicIngressTunnelProtectionPartnerName DisplayString
  cienaCesMplsDynamicIngressTunnelCosProfileIndex INTEGER
  cienaCesMplsDynamicIngressTunnelCosProfileName DisplayString

CienaCesMplsStaticEgressTunnelEntry  
SEQUENCE    
  cienaCesMplsStaticEgressTunnelIndex Unsigned32
  cienaCesMplsStaticEgressTunnelName DisplayString
  cienaCesMplsStaticEgressTunnelAdminState CienaGlobalState
  cienaCesMplsStaticEgressTunnelOperState CienaGlobalState
  cienaCesMplsStaticEgressTunnelSourceIpAddr IpAddress
  cienaCesMplsStaticEgressTunnelLabel Unsigned32

CienaCesMplsDynamicEgressTunnelEntry  
SEQUENCE    
  cienaCesMplsDynamicEgressTunnelIndex Unsigned32
  cienaCesMplsDynamicEgressTunnelName DisplayString
  cienaCesMplsDynamicEgressTunnelAdminState CienaGlobalState
  cienaCesMplsDynamicEgressTunnelOperState CienaGlobalState
  cienaCesMplsDynamicEgressTunnelInstance Unsigned32
  cienaCesMplsDynamicEgressTunnelSourceIpAddr IpAddress
  cienaCesMplsDynamicEgressTunnelDestIpAddr IpAddress
  cienaCesMplsDynamicEgressTunnelLabel Unsigned32

CienaCesMplsStaticTransitTunnelEntry  
SEQUENCE    
  cienaCesMplsStaticTransitTunnelIndex Unsigned32
  cienaCesMplsStaticTransitTunnelName DisplayString
  cienaCesMplsStaticTransitTunnelAdminState CienaGlobalState
  cienaCesMplsStaticTransitTunnelOperState CienaGlobalState
  cienaCesMplsStaticTransitTunnelNextHopIpAddr IpAddress
  cienaCesMplsStaticTransitTunnelInLabel INTEGER
  cienaCesMplsStaticTransitTunnelOutLabel INTEGER
  cienaCesMplsStaticTransitTunnelFcosPolicy FCosPolicy
  cienaCesMplsStaticTransitTunnelFixedTc Unsigned32
  cienaCesMplsStaticTransitTunnelFrmCosMapId INTEGER
  cienaCesMplsStaticTransitTunnelTTLPolicy TTLPolicy
  cienaCesMplsStaticTransitTunnelFixedTTL Unsigned32
  cienaCesMplsStaticTransitTunnelRcosPolicy FCosPolicy
  cienaCesMplsStaticTransitTunnelRCosMapId INTEGER
  cienaCesMplsStaticTransitTunnelCosProfileIndex INTEGER
  cienaCesMplsStaticTransitTunnelCosProfileName DisplayString
  cienaCesMplsStaticTransitTunnelSourceIpAddr IpAddress
  cienaCesMplsStaticTransitTunnelDestIpAddr IpAddress
  cienaCesMplsStaticTransitTunnelIncomingPackets Unsigned32
  cienaCesMplsStaticTransitTunnelOutgoingPackets Unsigned32
  cienaCesMplsStaticTransitTunnelIncomingBytes Unsigned32
  cienaCesMplsStaticTransitTunnelOutgoingBytes Unsigned32

CienaCesMplsDynamicTransitTunnelEntry  
SEQUENCE    
  cienaCesMplsDynamicTransitTunnelIndex Unsigned32
  cienaCesMplsDynamicTransitTunnelName DisplayString
  cienaCesMplsDynamicTransitTunnelAdminState CienaGlobalState
  cienaCesMplsDynamicTransitTunnelOperState CienaGlobalState
  cienaCesMplsDynamicTransitTunnelInLabel INTEGER
  cienaCesMplsDynamicTransitTunnelOutLabel INTEGER
  cienaCesMplsDynamicTransitTunnelNextHopIpAddr IpAddress
  cienaCesMplsDynamicTransitTunnelSourceIpAddr IpAddress
  cienaCesMplsDynamicTransitTunnelDestIpAddr IpAddress
  cienaCesMplsDynamicTransitTunnelIncomingPackets Unsigned32
  cienaCesMplsDynamicTransitTunnelOutgoingPackets Unsigned32
  cienaCesMplsDynamicTransitTunnelIncomingBytes Unsigned32
  cienaCesMplsDynamicTransitTunnelOutgoingBytes Unsigned32

CienaCesMplsTunnelPathEntry  
SEQUENCE    
  cienaCesMplsTunnelPathIndex Unsigned32
  cienaCesMplsTunnelPathName DisplayString
  cienaCesMplsTunnelPathUseCount Counter32

CienaCesMplsTunnelPathHopEntry  
SEQUENCE    
  cienaCesMplsTunnelPathHopIndex Unsigned32
  cienaCesMplsTunnelPathHopIpAddr IpAddress
  cienaCesMplsTunnelPathHopType INTEGER

CienaCesMplsNotifEncapTunnelEntry  
SEQUENCE    
  cienaCesMplsNotifEncapTunnelIndex Unsigned32
  cienaCesMplsNotifEncapTunnelType INTEGER
  cienaCesMplsNotifEncapTunnelName DisplayString
  cienaCesMplsNotifEncapTunnelAdminState CienaGlobalState
  cienaCesMplsNotifEncapTunnelOperState CienaGlobalState
  cienaCesMplsNotifEncapTunnelOamFaulted TunnelOamFault
  cienaCesMplsNotifEncapTunnelFaultedNodeId IpAddress

CienaCesMplsNotifTransitTunnelEntry  
SEQUENCE    
  cienaCesMplsNotifTransitTunnelIndex Unsigned32
  cienaCesMplsNotifTransitTunnelType INTEGER
  cienaCesMplsNotifTransitTunnelName DisplayString
  cienaCesMplsNotifTransitTunnelAdminState CienaGlobalState
  cienaCesMplsNotifTransitTunnelOperState CienaGlobalState
  cienaCesMplsNotifTransitTunnelOamFaulted TunnelOamFault

CienaCesMplsNotifEncapTunnelGrpEntry  
SEQUENCE    
  cienaCesMplsNotifEncapTunnelGrpIndex Unsigned32
  cienaCesMplsNotifEncapTunnelGrpName DisplayString
  cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex Unsigned32
  cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName DisplayString
  cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType INTEGER

CienaCesMplsAssociatedTunnelEntry  
SEQUENCE    
  cienaCesMplsAssociatedTunnelIndex Unsigned32
  cienaCesMplsAssociatedTunnelName DisplayString
  cienaCesMplsAssociatedForwardTunnelName DisplayString
  cienaCesMplsAssociatedForwardTunnelType DisplayString
  cienaCesMplsAssociatedReverseTunnelName DisplayString
  cienaCesMplsAssociatedReverseTunnelType DisplayString
  cienaCesMplsAssociatedForwardTunnelDestIpAddr IpAddress
  cienaCesMplsAssociatedDynamicTunnelSrcIpAddr IpAddress
  cienaCesMplsAssociatedTunnelAdminState CienaGlobalState
  cienaCesMplsAssociatedTunnelOperState CienaGlobalState
  cienaCesMplsAssociatedForwardTunnelOperState CienaGlobalState
  cienaCesMplsAssociatedReverseTunnelOperState CienaGlobalState
  cienaCesMplsAssociatedProtectionRole INTEGER
  cienaCesMplsAssociatedProtectionState INTEGER
  cienaCesMplsAssociatedTunnelProtectionPartnerName DisplayString
  cienaCesMplsAssociatedBfdMonitoring CienaGlobalState
  cienaCesMplsAssociatedBfdProfileName DisplayString
  cienaCesMplsAssociatedBfdSessionName DisplayString
  cienaCesMplsAssociatedBfdSessionFaulted INTEGER
  cienaCesMplsAssociatedBfdProfileIndex Unsigned32

CienaCesMplsTunnelARHopEntry  
SEQUENCE    
  cienaMplsTunnelARHopListIndex Unsigned32
  cienaMplsTunnelARHopIndex Unsigned32
  cienaMplsTunnelARHopAddrType INTEGER
  cienaMplsTunnelARHopIpAddr IpAddress
  cienaMplsTunnelARHopAddrUnnum Unsigned32
  cienaMplsTunnelARHopLspId Unsigned32

CienaCesMplsNotifAssociatedTunnelEntry  
SEQUENCE    
  cienaCesMplsNotifAssociatedTunnelIndex Unsigned32
  cienaCesMplsNotifAssociatedTunnelType INTEGER
  cienaCesMplsNotifAssociatedTunnelName DisplayString
  cienaCesMplsNotifAssociatedTunnelAdminState CienaGlobalState
  cienaCesMplsNotifAssociatedTunnelOperState CienaGlobalState
  cienaCesMplsNotifAssociatedTunnelOamFaulted TunnelOamFault
  cienaCesMplsNotifAssociatedTunnelFaultedNodeId IpAddress

CienaCesMplsNotifCacInterfaceEntry  
SEQUENCE    
  cienaCesMplsNotifCacInterfaceIndex Unsigned32
  cienaCesMplsNotifCacInterfaceClassType Unsigned32
  cienaCesMplsNotifCacInterfaceName DisplayString
  cienaCesMplsNotifCacInterfaceThreshold Unsigned32

CienaCesMplsClassProfileEntry  
SEQUENCE    
  cienaCesMplsClassProfileIndex Unsigned32
  cienaCesMplsClassProfileName DisplayString
  cienaCesMplsClassProfileCacPolicy CacPolicy

CienaCesMplsTEClassTypeEntry  
SEQUENCE    
  cienaCesMplsClassType Unsigned32
  cienaCesMplsClassTypeQueueGroupIndex Unsigned32
  cienaCesMplsClassTypeQueueGroupInstance Unsigned32
  cienaCesMplsClassTypeLom Unsigned32
  cienaCesMplsClassTypeAlarmThreshold Unsigned32

CienaCesGmplsStaticIngressUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticIngressUniDirTunnelIndex Unsigned32
  cienaCesGmplsStaticIngressUniDirTunnelName DisplayString
  cienaCesGmplsStaticIngressUniDirTunnelNextHopIp IpAddress
  cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddr IpAddress
  cienaCesGmplsStaticIngressUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticIngressUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticIngressUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabel Unsigned32
  cienaCesGmplsStaticIngressUniDirTunnelProtectionRole INTEGER
  cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerName DisplayString
  cienaCesGmplsStaticIngressUniDirTunnelProtectionState INTEGER
  cienaCesGmplsStaticIngressUniDirTunnelTTLPolicy TTLPolicy
  cienaCesGmplsStaticIngressUniDirTunnelFixedTTL Unsigned32
  cienaCesGmplsStaticIngressUniDirTunnelGrpIndex Unsigned32
  cienaCesGmplsStaticIngressUniDirTunnelReversion INTEGER
  cienaCesGmplsStaticIngressUniDirTunnelReversionTimeout Unsigned32
  cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndex INTEGER
  cienaCesGmplsStaticIngressUniDirTunnelCosProfileName DisplayString
  cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjoint INTEGER

CienaCesGmplsStaticIngressCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticIngressCoroutedTunnelIndex Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelNextHopIp IpAddress
  cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr IpAddress
  cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticIngressCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticIngressCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabel Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabel Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelProtectionRole INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelProtectionState INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsStaticIngressCoroutedTunnelFixedTTL Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelGrpIndex Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelReversion INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeout Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndex INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelCosProfileName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoring CienaGlobalState
  cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoring CienaGlobalState
  cienaCesGmplsStaticIngressCoroutedTunnelAisProfileName DisplayString
  cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaulted INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndex Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjoint INTEGER
  cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNum Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelLspId Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelId Unsigned32
  cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelId Unsigned32

CienaCesGmplsDynamicIngressUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicIngressUniDirTunnelIndex Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelName DisplayString
  cienaCesMplsDynamicIngressUniDirTunnelLspId Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp IpAddress
  cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddr IpAddress
  cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicIngressUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicIngressUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabel Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelProtectionRole INTEGER
  cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerName DisplayString
  cienaCesGmplsDynamicIngressUniDirTunnelProtectionState INTEGER
  cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicy TTLPolicy
  cienaCesGmplsDynamicIngressUniDirTunnelFixedTTL Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelGrpIndex Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelReversion INTEGER
  cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeout Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndex Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelCosProfileName DisplayString
  cienaCesGmplsDynamicIngressUniDirTunnelRecordRoute INTEGER
  cienaCesGmplsDynamicIngressUniDirTunnelFastRoute INTEGER
  cienaCesGmplsDynamicIngressUniDirTunnelSetupPriority Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelHoldPriority Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelPathIndex Unsigned32
  cienaCesGmplsDynamicIngressUniDirTunnelPathName DisplayString
  cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile DisplayString
  cienaCesGmplsDynamicIngressUniDirTunnelResourcePointer RowPointer

CienaCesGmplsDynamicIngressCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicIngressCoroutedTunnelIndex Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp IpAddress
  cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr IpAddress
  cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicIngressCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicIngressCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelReversion INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelPathName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer RowPointer
  cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring CienaGlobalState
  cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName DisplayString
  cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable INTEGER
  cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization MplsGlobalState
  cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType PathDisjointType
  cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode PathDisjointMode
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable MplsGlobalState
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr AutoSizeFailHdlr
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState AutoSizeState
  cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode AutoSizeMode
  cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth MplsBitRate
  cienaCesGmplsDynamicIngressCoroutedTunnelClassType Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny Unsigned32
  cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny Unsigned32
  cienaCesGmplsDynamicIngressCoroutedLspId Unsigned32

CienaCesGmplsStaticEgressUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticEgressUniDirTunnelIndex Unsigned32
  cienaCesGmplsStaticEgressUniDirTunnelName DisplayString
  cienaCesGmplsStaticEgressUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticEgressUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsStaticEgressUniDirTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsStaticEgressUniDirTunnelSourceIpAddr IpAddress
  cienaCesGmplsStaticEgressUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticEgressUniDirTunnelForwardInLabel Unsigned32

CienaCesGmplsStaticEgressCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticEgressCoroutedTunnelIndex Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticEgressCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsStaticEgressCoroutedTunnelSourceIpAddr IpAddress
  cienaCesGmplsStaticEgressCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticEgressCoroutedTunnelForwardInLabel Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelReverseOutLabel Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelProtectionRole INTEGER
  cienaCesGmplsStaticEgressCoroutedTunnelProtectionPartnerName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelProtectionState INTEGER
  cienaCesGmplsStaticEgressCoroutedTunnelGrpIndex Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelReversion INTEGER
  cienaCesGmplsStaticEgressCoroutedTunnelReversionTimeout Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelCosProfileIndex Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelCosProfileName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelBfdMonitoring CienaGlobalState
  cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelAisMonitoring CienaGlobalState
  cienaCesGmplsStaticEgressCoroutedTunnelAisProfileName DisplayString
  cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionFaulted INTEGER
  cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileIndex Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelRecoveryDisjoint INTEGER
  cienaCesGmplsStaticEgressCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsStaticEgressCoroutedTunnelFixedTTL Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIfNum Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelLspId Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelSrcTunnelId Unsigned32
  cienaCesGmplsStaticEgressCoroutedTunnelDestTunnelId Unsigned32

CienaCesGmplsDynamicEgressUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicEgressUniDirTunnelIndex Unsigned32
  cienaCesGmplsDynamicEgressUniDirTunnelName DisplayString
  cienaCesGmplsDynamicEgressUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicEgressUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicEgressUniDirLspId Unsigned32
  cienaCesGmplsDynamicEgressUniDirTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsDynamicEgressUniDirTunnelSourceIpAddr IpAddress
  cienaCesGmplsDynamicEgressUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicEgressUniDirTunnelForwardInLabel Unsigned32

CienaCesGmplsDynamicEgressCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicEgressCoroutedTunnelIndex Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelName DisplayString
  cienaCesGmplsDynamicEgressCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicEgressCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicEgressCoroutedLspId Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsDynamicEgressCoroutedTunnelSourceIpAddr IpAddress
  cienaCesGmplsDynamicEgressCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicEgressCoroutedTunnelForwardInLabel Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelReverseOutLabel Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelProtectionRole INTEGER
  cienaCesGmplsDynamicEgressCoroutedTunnelProtectionPartnerName DisplayString
  cienaCesGmplsDynamicEgressCoroutedTunnelProtectionState INTEGER
  cienaCesGmplsDynamicEgressCoroutedTunnelGrpIndex Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelReversion INTEGER
  cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileIndex Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileName DisplayString
  cienaCesGmplsDynamicEgressCoroutedTunnelBfdMonitoring CienaGlobalState
  cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileName DisplayString
  cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionName DisplayString
  cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionFaulted INTEGER
  cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileIndex Unsigned32
  cienaCesGmplsDynamicEgressCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsDynamicEgressCoroutedTunnelFixedTTL Unsigned32

CienaCesGmplsStaticTransitUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticTransitUniDirTunnelIndex Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelName DisplayString
  cienaCesGmplsStaticTransitUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticTransitUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsStaticTransitUniDirTunnelSourceIpAddr IpAddress
  cienaCesGmplsStaticTransitUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticTransitUniDirTunnelNextHopIpAddr IpAddress
  cienaCesGmplsStaticTransitUniDirTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsStaticTransitUniDirTunnelForwardInLabel Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelForwardOutLabel Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelTTLPolicy TTLPolicy
  cienaCesGmplsStaticTransitUniDirTunnelFixedTTL Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelCosProfileIndex Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelCosProfileName DisplayString
  cienaCesGmplsStaticTransitUniDirTunnelAisMonitoring CienaGlobalState
  cienaCesGmplsStaticTransitUniDirTunnelAisProfileName DisplayString
  cienaCesGmplsStaticTransitUniDirTunnelIncomingPackets Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelOutgoingPackets Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelIncomingBytes Unsigned32
  cienaCesGmplsStaticTransitUniDirTunnelOutgoingBytes Unsigned32

CienaCesGmplsStaticTransitCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsStaticTransitCoroutedTunnelIndex Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelName DisplayString
  cienaCesGmplsStaticTransitCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsStaticTransitCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsStaticTransitCoroutedTunnelSourceIpAddr IpAddress
  cienaCesGmplsStaticTransitCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsStaticTransitCoroutedTunnelNextHopIpAddr IpAddress
  cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsStaticTransitCoroutedTunnelForwardInLabel Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelForwardOutLabel Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseInLabel Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseOutLabel Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsStaticTransitCoroutedTunnelFixedTTL Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelCosProfileIndex Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelCosProfileName DisplayString
  cienaCesGmplsStaticTransitCoroutedTunnelAisMonitoring CienaGlobalState
  cienaCesGmplsStaticTransitCoroutedTunnelAisProfileName DisplayString
  cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIfNum Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelNextHopIfNum Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelLspId Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelSrcTunnelId Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelDestTunnelId Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelIncomingPackets Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelOutgoingPackets Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelIncomingBytes Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelOutgoingBytes Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingPackets Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingPackets Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingBytes Unsigned32
  cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingBytes Unsigned32

CienaCesGmplsDynamicTransitUniDirTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicTransitUniDirTunnelIndex Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelName DisplayString
  cienaCesGmplsDynamicTransitUniDirTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicTransitUniDirTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicTransitUniDirTunnelSourceIpAddr IpAddress
  cienaCesGmplsDynamicTransitUniDirTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicTransitUniDirTunnelNextHopIpAddr IpAddress
  cienaCesGmplsDynamicTransitUniDirTunnelForwardInLabel Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelForwardOutLabel Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelTTLPolicy TTLPolicy
  cienaCesGmplsDynamicTransitUniDirTunnelFixedTTL Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelIncomingPackets Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelOutgoingPackets Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelIncomingBytes Unsigned32
  cienaCesGmplsDynamicTransitUniDirTunnelOutgoingBytes Unsigned32

CienaCesGmplsDynamicTransitCoroutedTunnelEntry  
SEQUENCE    
  cienaCesGmplsDynamicTransitCoroutedTunnelIndex Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelName DisplayString
  cienaCesGmplsDynamicTransitCoroutedTunnelAdminState CienaGlobalState
  cienaCesGmplsDynamicTransitCoroutedTunnelOperState CienaGlobalState
  cienaCesGmplsDynamicTransitCoroutedTunnelSourceIpAddr IpAddress
  cienaCesGmplsDynamicTransitCoroutedTunnelDestIpAddr IpAddress
  cienaCesGmplsDynamicTransitCoroutedTunnelNextHopIpAddr IpAddress
  cienaCesGmplsDynamicTransitCoroutedTunnelPrevHopIpAddr IpAddress
  cienaCesGmplsDynamicTransitCoroutedTunnelForwardInLabel Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelForwardOutLabel Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseInLabel Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutLabel Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelTTLPolicy TTLPolicy
  cienaCesGmplsDynamicTransitCoroutedTunnelFixedTTL Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelIncomingPackets Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingPackets Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelIncomingBytes Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingBytes Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingPackets Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingPackets Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes Unsigned32
  cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes Unsigned32

CienaCesGmplsAssociatedTunnelEntry  
SEQUENCE    
  cienaCesGmplsAssociatedTunnelIndex Unsigned32
  cienaCesGmplsAssociatedTunnelName DisplayString
  cienaCesGmplsAssociatedForwardTunnelName DisplayString
  cienaCesGmplsAssociatedForwardTunnelType DisplayString
  cienaCesGmplsAssociatedReverseTunnelName DisplayString
  cienaCesGmplsAssociatedReverseTunnelType DisplayString
  cienaCesGmplsAssociatedForwardTunnelDestIpAddr IpAddress
  cienaCesGmplsAssociatedDynamicTunnelSrcIpAddr IpAddress
  cienaCesGmplsAssociatedTunnelAdminState CienaGlobalState
  cienaCesGmplsAssociatedTunnelOperState CienaGlobalState
  cienaCesGmplsAssociatedForwardTunnelOperState CienaGlobalState
  cienaCesGmplsAssociatedReverseTunnelOperState CienaGlobalState
  cienaCesGmplsAssociatedProtectionRole INTEGER
  cienaCesGmplsAssociatedProtectionState INTEGER
  cienaCesGmplsAssociatedTunnelProtectionPartnerName DisplayString
  cienaCesGmplsAssociatedBfdMonitoring CienaGlobalState
  cienaCesGmplsAssociatedBfdProfileName DisplayString
  cienaCesGmplsAssociatedBfdSessionName DisplayString
  cienaCesGmplsAssociatedAisMonitoring CienaGlobalState
  cienaCesGmplsAssociatedAisProfileName DisplayString
  cienaCesGmplsAssociatedBfdSessionFaulted INTEGER
  cienaCesGmplsAssociatedBfdProfileIndex Unsigned32

CienaCesGmplsTunnelARHopEntry  
SEQUENCE    
  cienaGmplsTunnelARHopListIndex Unsigned32
  cienaGmplsTunnelARHopIndex Unsigned32
  cienaGmplsTunnelARHopAddrType INTEGER
  cienaGmplsTunnelARHopIpAddr IpAddress
  cienaGmplsTunnelARHopAddrUnnum Unsigned32
  cienaGmplsTunnelARHopLspId Unsigned32

CienaCesGmplsNotifEncapTunnelEntry  
SEQUENCE    
  cienaCesGmplsNotifEncapTunnelIndex Unsigned32
  cienaCesGmplsNotifEncapTunnelType INTEGER
  cienaCesGmplsNotifEncapTunnelName DisplayString
  cienaCesGmplsNotifEncapTunnelAdminState CienaGlobalState
  cienaCesGmplsNotifEncapTunnelOperState CienaGlobalState
  cienaCesGmplsNotifEncapTunnelAisFaulted TunnelAisFault
  cienaCesGmplsNotifEncapTunnelFaultedNodeId IpAddress
  cienaCesGmplsNotifEncapTunnelFarEndLerId IpAddress
  cienaCesGmplsNotifEncapTunnelResult INTEGER
  cienaCesGmplsNotifEncapTunnelProtectionRole INTEGER
  cienaCesGmplsNotifEncapTunnelRequestedBw Unsigned32
  cienaCesGmplsNotifEncapTunnelOperationalBw Unsigned32
  cienaCesGmplsNotifEncapTunnelMbbParentApp INTEGER
  cienaCesGmplsNotifEncapTunnelOamFaulted TunnelOamFault

CienaCesGmplsNotifDecapTunnelEntry  
SEQUENCE    
  cienaCesGmplsNotifDecapTunnelIndex Unsigned32
  cienaCesGmplsNotifDecapTunnelType INTEGER
  cienaCesGmplsNotifDecapTunnelName DisplayString
  cienaCesGmplsNotifDecapTunnelAdminState CienaGlobalState
  cienaCesGmplsNotifDecapTunnelOperState CienaGlobalState
  cienaCesGmplsNotifDecapTunnelAisFaulted TunnelAisFault
  cienaCesGmplsNotifDecapTunnelFaultedNodeId IpAddress
  cienaCesGmplsNotifDecapTunnelFarEndLerId IpAddress
  cienaCesGmplsNotifDecapTunnelOamFaulted TunnelOamFault

CienaCesGmplsNotifTransitTunnelEntry  
SEQUENCE    
  cienaCesGmplsNotifTransitTunnelIndex Unsigned32
  cienaCesGmplsNotifTransitTunnelType INTEGER
  cienaCesGmplsNotifTransitTunnelName DisplayString
  cienaCesGmplsNotifTransitTunnelAdminState CienaGlobalState
  cienaCesGmplsNotifTransitTunnelOperState CienaGlobalState
  cienaCesGmplsNotifTransitTunnelOamFaulted TunnelOamFault

CienaCesGmplsNotifAssociatedTunnelEntry  
SEQUENCE    
  cienaCesGmplsNotifAssociatedTunnelIndex Unsigned32
  cienaCesGmplsNotifAssociatedTunnelType INTEGER
  cienaCesGmplsNotifAssociatedTunnelName DisplayString
  cienaCesGmplsNotifAssociatedTunnelAdminState CienaGlobalState
  cienaCesGmplsNotifAssociatedTunnelOperState CienaGlobalState
  cienaCesGmplsNotifAssociatedTunnelAisFaulted TunnelAisFault
  cienaCesGmplsNotifAssociatedTunnelFaultedNodeId IpAddress
  cienaCesGmplsNotifAssociatedTunnelFarEndLerId IpAddress
  cienaCesGmplsNotifAssociatedTunnelOamFaulted TunnelOamFault

CienaCesGmplsNotifEncapTunnelGrpEntry  
SEQUENCE    
  cienaCesGmplsNotifEncapTunnelGrpIndex Unsigned32
  cienaCesGmplsNotifEncapTunnelGrpName DisplayString
  cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlIndex Unsigned32
  cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlName DisplayString
  cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlType INTEGER

CienaCesGmplsNotifDecapTunnelGrpEntry  
SEQUENCE    
  cienaCesGmplsNotifDecapTunnelGrpIndex Unsigned32
  cienaCesGmplsNotifDecapTunnelGrpName DisplayString
  cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlIndex Unsigned32
  cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlName DisplayString
  cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlType INTEGER

CienaCesGmplsNotifTunnelAisFaultErrorEntry  
SEQUENCE    
  cienaCesGmplsNotifTunnelDecapLabel Unsigned32
  cienaCesGmplsNotifTunnelErrorMsg DisplayString

CienaCesMplsTunnelCosProfileEntry  
SEQUENCE    
  cienaCesMplsTunnelCosProfileIndex Unsigned32
  cienaCesMplsTunnelCosProfileName DisplayString
  cienaCesMplsTunnelFrmCosPolicy FCosPolicy
  cienaCesMplsTunnelFrmCosMapId INTEGER
  cienaCesMplsTunnelFrmCosMapName DisplayString
  cienaCesMplsTunnelFixedTC Unsigned32
  cienaCesMplsTunnelRcosPolicy RCosPolicy
  cienaCesMplsTunnelRcosMapName DisplayString
  cienaCesMplsTunnelRCosMapId INTEGER
  cienaCesMplsTunnelRcosProfileName DisplayString
  cienaCesMplsTunnelRCosProfileId Unsigned32

CienaCesMplsGlobalTunnelPathEntry  
SEQUENCE    
  cienaCesMplsGlobalTunnelPathIndex Unsigned32
  cienaCesMplsGlobalTunnelPathName DisplayString
  cienaCesMplsGlobalTunnelPathUseCount Counter32

CienaCesMplsGlobalTunnelPathHopEntry  
SEQUENCE    
  cienaCesMplsGlobalTunnelPathHopIndex Unsigned32
  cienaCesMplsGlobalTunnelPathHopIpAddr IpAddress
  cienaCesMplsGlobalTunnelPathHopType INTEGER

CienaCesMplsGlobalFreeStaticTunnelLabelEntry  
SEQUENCE    
  cienaCesMplsGlobalFreeStaticTunnelLabelIndex Unsigned32
  cienaCesMplsGlobalFreeStaticTunnelLabel Unsigned32

CienaCesTeLinkEntry  
SEQUENCE    
  cienaCesTeIfIndex Unsigned32
  cienaCesTeInterfaceName DisplayString
  cienaCesTeLinkMetric Unsigned32
  cienaCesTeResourceColorGroupIndex Unsigned32
  cienaCesTeResourceColorBitMask OCTET STRING
  cienaCesMplsClassProfIndex Unsigned32
  cienaCesTeLinkMode TEMode
  cienaCesTeLinkSrlgCount Unsigned32
  cienaCesTeLinkMaximumBandwidth MplsBitRate
  cienaCesTeLinkMaximumReservableBandwidth MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio0 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio0 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio0 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio1 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio1 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio1 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio2 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio2 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio2 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio3 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio3 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio3 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio4 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio4 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio4 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio5 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio5 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio5 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio6 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio6 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio6 MplsBitRate
  cienaCesTeLinkTotalBandwidthPrio7 MplsBitRate
  cienaCesTeLinkReservedBandwidthPrio7 MplsBitRate
  cienaCesTeLinkUnReservedBandwidthPrio7 MplsBitRate

CienaCesTeResGrpEntry  
SEQUENCE    
  cienaCesTeResourceColorGrpIndex Unsigned32
  cienaCesTeResourceGrpName DisplayString
  cienaCesTeResourceColorGroupBitMask OCTET STRING
  cienaCesTeResourceColorGroupUseCount Counter32

CienaCesTeResColorEntry  
SEQUENCE    
  cienaCesTeResourceColorIndex Unsigned32
  cienaCesTeResourceColorName DisplayString
  cienaCesTeResourceColorBit OCTET STRING
  cienaCesTeResourceColorUseCount Counter32

CienaCesTeLinkSrlgEntry  
SEQUENCE    
  cienaCesTeLinkSrlg Unsigned32
  cienaCesTeLinkSrlgStatus SRLGState

CienaCesMplsPwEntry  
SEQUENCE    
  cienaCesMplsPwIndex Unsigned32
  cienaCesMplsPwSignallingType INTEGER
  cienaCesMplsPwId Unsigned32
  cienaCesMplsPwName DisplayString
  cienaCesMplsPwCustomerName DisplayString
  cienaCesMplsPwAdminState CienaGlobalState
  cienaCesMplsPwOperState CienaGlobalState
  cienaCesMplsPwPeerIpAddr IpAddress
  cienaCesMplsPwInLabel Integer32
  cienaCesMplsPwOutLabel Integer32
  cienaCesMplsPwStatusTlv INTEGER
  cienaCesMplsPwRefreshStatusIntvl Unsigned32
  cienaCesMplsPwLocalFault VCStatus
  cienaCesMplsPwRemoteFault VCStatus
  cienaCesMplsPwMtu Unsigned32
  cienaCesMplsPwType INTEGER
  cienaCesMplsPwMode INTEGER
  cienaCesMplsPwCoSProfileName DisplayString
  cienaCesMplsPwCoSProfileIndex Unsigned32
  cienaCesMplsPwEgressL2PtTransform CienaGlobalState
  cienaCesMplsPwVccVProfileName DisplayString
  cienaCesMplsPwVccVProfileIndex Unsigned32
  cienaCesMplsPwLocalCcCv DisplayString
  cienaCesMplsPwRemoteCcCv DisplayString
  cienaCesMplsPwOperatingCcCv DisplayString
  cienaCesMplsPwBlocking INTEGER
  cienaCesMplsPwVifIndex Unsigned32
  cienaCesMplsPwConfigTunnelName DisplayString
  cienaCesMplsPwConfigTunnelType TunnelType
  cienaCesMplsPwConfigTunnelIndex Unsigned32
  cienaCesMplsPwActiveTunnelName DisplayString
  cienaCesMplsPwActiveTunnelType TunnelType
  cienaCesMplsPwActiveTunnelIndex Unsigned32
  cienaCesMplsPwRole INTEGER
  cienaCesMplsPwPrimaryPwName DisplayString
  cienaCesMplsPwPrimaryPwIndex Unsigned32
  cienaCesMplsPwVsIndex Unsigned32
  cienaCesServiceDelimiterVID Unsigned32
  cienaCesServiceDelimiterTPID Unsigned32
  cienaCesMplsPwReversion INTEGER
  cienaCesMplsPwRevertTime Unsigned32
  cienaCesMplsPwProtectionRole INTEGER
  cienaCesMplsPwProtectionState INTEGER
  cienaCesMplsPwVsName DisplayString
  cienaCesMplsPwStatusQuery INTEGER
  cienaCesMplsMsPwPeerPwName DisplayString
  cienaCesMplsMsPwPeerPwIndex Unsigned32
  cienaCesMplsPwIdInRemoteFault Unsigned32
  cienaCesMplsLocalIpInRemoteFault IpAddress
  cienaCesMplsRemoteIpInRemoteFault IpAddress
  cienaCesMplsPwFaultToNextHop VCStatus
  cienaCesMplsPwIdInFaultToNextHop Unsigned32
  cienaCesMplsLocalIpInFaultToNextHop IpAddress
  cienaCesMplsRemoteIpInFaultToNextHop IpAddress
  cienaCesMplsPwConfigBandwidth MplsBitRate
  cienaCesMplsPwOperBandwidth MplsBitRate
  cienaCesMplsPwBandwidthState INTEGER

CienaCesMplsPwCosProfileEntry  
SEQUENCE    
  cienaCesMplsPwCosProfileIndex Unsigned32
  cienaCesMplsPwCosProfileName DisplayString
  cienaCesMplsPwCosProfileFrmCosPolicy FCosPolicy
  cienaCesMplsPwCosProfileFrmCosMapId Unsigned32
  cienaCesMplsPwCosProfileFrmCosMapName DisplayString
  cienaCesMplsPwCosProfileFixedTC Unsigned32
  cienaCesMplsPwCosProfileRcosPolicy RCosPolicy
  cienaCesMplsPwCosProfileRcosMapName DisplayString
  cienaCesMplsPwCosProfileRCosMapId Unsigned32
  cienaCesMplsPwCosProfileRcosProfileName DisplayString
  cienaCesMplsPwCosProfileRCosProfileId INTEGER
  cienaCesMplsPwCosProfileRCosFixed Unsigned32

CienaCesMplsPwVccvProfileEntry  
SEQUENCE    
  cienaCesMplsPwVccvProfileIndex Unsigned32
  cienaCesMplsPwVccvProfileName DisplayString
  cienaCesMplsPwVccvProfileCcTtlExp INTEGER
  cienaCesMplsPwVccvProfileCcCienaOob INTEGER

CienaCesMplsPwNotifEntry  
SEQUENCE    
  cienaCesMplsPwNotifPwIndex Unsigned32
  cienaCesMplsPwNotifPwId Unsigned32
  cienaCesMplsPwNotifPwName DisplayString
  cienaCesMplsPwNotifPwPeerIpAddr IpAddress
  cienaCesMplsPwNotifPriPwId Unsigned32
  cienaCesMplsPwNotifPriPwName DisplayString
  cienaCesMplsPwNotifPriPwPeerIpAddr IpAddress
  cienaCesMplsPwNotifActPwIndex Unsigned32
  cienaCesMplsPwNotifActPwId Unsigned32
  cienaCesMplsPwNotifActPwName DisplayString
  cienaCesMplsPwNotifActPwPeerIpAddr IpAddress

CienaCesMplsPWTrafficStatsEntry  
SEQUENCE    
  cienaCesMplsPWTrafficStatsPWIndex Unsigned32
  cienaCesMplsPWTrafficStatsIncomingPackets Unsigned32
  cienaCesMplsPWTrafficStatsOutgoingPackets Unsigned32
  cienaCesMplsPWTrafficStatsIncomingBytes Unsigned32
  cienaCesMplsPWTrafficStatsOutgoingBytes Unsigned32

Defined Values

cienaCesMplsMIB 1.3.6.1.4.1.1271.2.1.18
This MIB module defines the mgmt objects for the MPLS feature for LEOS based Ciena products.
MODULE-IDENTITY    

cienaCesMplsMIBObjects 1.3.6.1.4.1.1271.2.1.18.1
OBJECT IDENTIFIER    

cienaCesMpls 1.3.6.1.4.1.1271.2.1.18.1.1
OBJECT IDENTIFIER    

cienaCesGmpls 1.3.6.1.4.1.1271.2.1.18.1.2
OBJECT IDENTIFIER    

cienaCesMplsGlobal 1.3.6.1.4.1.1271.2.1.18.1.3
OBJECT IDENTIFIER    

cienaCesMplsPw 1.3.6.1.4.1.1271.2.1.18.1.4
OBJECT IDENTIFIER    

cienaCesMplsTe 1.3.6.1.4.1.1271.2.1.18.1.5
OBJECT IDENTIFIER    

cienaCesMplsMIBNotificationPrefix 1.3.6.1.4.1.1271.2.2.17
OBJECT IDENTIFIER    

cienaCesMplsMIBNotifications 1.3.6.1.4.1.1271.2.2.17.0
OBJECT IDENTIFIER    

cienaCesGmplsMIBNotifications 1.3.6.1.4.1.1271.2.2.17.1
OBJECT IDENTIFIER    

cienaCesMplsPwMIBNotifications 1.3.6.1.4.1.1271.2.2.17.2
OBJECT IDENTIFIER    

cienaCesMplsGlobalAttrs 1.3.6.1.4.1.1271.2.1.18.1.1.1
OBJECT IDENTIFIER    

cienaCesMplsStaticAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.1
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsStaticAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.2
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsStaticOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.3
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsStaticOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.4
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsDynamicAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.5
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsDynamicAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.6
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsDynamicOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.1.1.7
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsDynamicOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.1.1.8
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 16..1048575  

cienaCesMplsStaticIngressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.2
The (conceptual) table listing the MPLS static encap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsStaticIngressTunnelEntry

cienaCesMplsStaticIngressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.2.1
This represents an entry of the MPLS static encap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsStaticIngressTunnelEntry  

cienaCesMplsStaticIngressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsStaticIngressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsStaticIngressTunnelWeight 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

cienaCesMplsStaticIngressTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4
Specifies the next hop IP address for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticIngressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5
Specifies the administrative status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticIngressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6
Specifies the operational status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticIngressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticIngressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048575  

cienaCesMplsStaticIngressTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9
Frame CoS policy of the static encap tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  FCosPolicy  

cienaCesMplsStaticIngressTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10
The frame CoS map ID of the static encap tunnel. This value is valid if the frame CoS policy selected for the static encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticIngressTunnelFixedExp 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11
This object is deprecated and the new object to provide this information is cienaCesMplsStaticIngressTunnelFixedTC in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsStaticIngressTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesMplsStaticIngressTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesMplsStaticIngressTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14
The group ID of the tunnel group of which the static encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticIngressTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsStaticIngressTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticIngressTunnelPrimaryTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsStaticIngressTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19
If the frame CoS policy for the static encap tunnel is fixed, this value is used for MPLS encapsulation.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsStaticIngressTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.20
specifies the protection role of the static encap tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesMplsStaticIngressTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.21
specifies the protection status of the static encap tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesMplsStaticIngressTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.22
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsStaticIngressTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.23
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticIngressTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.24
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsStaticIngressTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.1.2.1.25
Specifies the type of Recovery Disjoint
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link(2), node(3), srlg(4), unknown(5)  

cienaCesMplsDynamicIngressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.3
The (conceptual) table listing the MPLS encap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsDynamicIngressTunnelEntry

cienaCesMplsDynamicIngressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.3.1
An entry in the dynamic encap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsDynamicIngressTunnelEntry  

cienaCesMplsDynamicIngressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsDynamicIngressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2
This represents the dynamic encap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsDynamicIngressTunnelWeight 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3
A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

cienaCesMplsDynamicIngressTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4
A unique index within a tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicIngressTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5
Specifies the next hop IP address for the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicIngressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6
Specifies the administrative status of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicIngressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7
Specifies the operational status of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicIngressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8
Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel inherits the IP address of the tunnel group. This object cannot be modified once the dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicIngressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9
Label for the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER -1..1048575  

cienaCesMplsDynamicIngressTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10
Frame CoS policy of the dynamic encap tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER fixed(1), rcos-mapped(2)  

cienaCesMplsDynamicIngressTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11
The frame CoS map ID of the dynamic encap tunnel. This value is valid if the frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the cienaCesTceDpTsCosMapFcosMapTable.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsDynamicIngressTunnelFixedExp 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12
This object is deprecated and the new object to provide this information is cienaCesMplsDynamicIngressTunnelFixedTC in this table.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsDynamicIngressTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13
Indicates the set up priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsDynamicIngressTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14
Indicates the holding priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsDynamicIngressTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsDynamicIngressTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link-protect(2), node-protect(3)  

cienaCesMplsDynamicIngressTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER fixed(1), inherit(2)  

cienaCesMplsDynamicIngressTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18
If the TTL policy for the dynamic encap tunnel is fixed, this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesMplsDynamicIngressTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicIngressTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20
The path name corresponding to the pathIndex object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsDynamicIngressTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21
The group id of the tunnel group of which the dynamic encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicIngressTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23
The OID must be one of the entries in mplsTunnelResourceTable.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

cienaCesMplsDynamicIngressTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsDynamicIngressTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsDynamicIngressTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26
This object represents the bandwidth profile attached to this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsDynamicIngressTunnelPrimaryTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsDynamicIngressTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28
If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used for MPLS encapsulation.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsDynamicIngressTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29
specifies the protection role of the static encap tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesMplsDynamicIngressTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30
specifies the protection status of the static encap tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesMplsDynamicIngressTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31
This object represents the primary tunnel it is protecting, if this is a backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsDynamicIngressTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsDynamicIngressTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsStaticEgressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.4
The (conceptual) table listing the MPLS decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsStaticEgressTunnelEntry

cienaCesMplsStaticEgressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.4.1
An entry in the static decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsStaticEgressTunnelEntry  

cienaCesMplsStaticEgressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticEgressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2
This represents the decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsStaticEgressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3
Administrative status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticEgressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4
Indicates the operational status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticEgressTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticEgressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6
Indicates the label of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesMplsDynamicEgressTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.5
The (conceptual) table listing the MPLS dynamic decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsDynamicEgressTunnelEntry

cienaCesMplsDynamicEgressTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.5.1
An entry in the dynamic decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsDynamicEgressTunnelEntry  

cienaCesMplsDynamicEgressTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicEgressTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2
This represents the dynamic decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesMplsDynamicEgressTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3
Indicates the administrative status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicEgressTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4
Indicates the operational status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicEgressTunnelInstance 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5
Indicates the LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicEgressTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6
Source IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicEgressTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7
Destination IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicEgressTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8
Idicates the label of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.6
The (conceptual) table listing the MPLS static transit tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsStaticTransitTunnelEntry

cienaCesMplsStaticTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.6.1
An entry in the static transit tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsStaticTransitTunnelEntry  

cienaCesMplsStaticTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2
This represents the static transit tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesMplsStaticTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3
Indicates the administrative status of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4
Indicates the operational status of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsStaticTransitTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5
Next hop IP address of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticTransitTunnelInLabel 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6
Indicates the incoming label of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048575  

cienaCesMplsStaticTransitTunnelOutLabel 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7
Indicates the outgoing label of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048575  

cienaCesMplsStaticTransitTunnelFcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8
Frame CoS policy of the static transit tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  FCosPolicy  

cienaCesMplsStaticTransitTunnelFixedTc 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9
If frame CoS policy for the static transit tunnel is fixed, this value is used for MPLS encapsulation.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsStaticTransitTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10
The frame CoS map ID of the static transit tunnel. This value is valid if the frame cos policy selected for the static transit tunnel is rcos-mapped.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticTransitTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesMplsStaticTransitTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12
If the TTL policy for the static transit tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesMplsStaticTransitTunnelRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13
Resolved CoS policy of the static transit tunnel.
Status: deprecated Access: read-only
OBJECT-TYPE    
  FCosPolicy  

cienaCesMplsStaticTransitTunnelRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14
The resolved CoS map ID of the static transit tunnel. This value is valid if the resolved CoS policy selected for the static transit tunnel is rcos-mapped.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticTransitTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.15
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsStaticTransitTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.16
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsStaticTransitTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.17
Source IP address of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticTransitTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.18
Destination IP address of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsStaticTransitTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.19
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticTransitTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticTransitTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.21
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsStaticTransitTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.6.1.22
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.7
The (conceptual) table listing the MPLS dynamic transit tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsDynamicTransitTunnelEntry

cienaCesMplsDynamicTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.7.1
An entry in the dynamic transit tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsDynamicTransitTunnelEntry  

cienaCesMplsDynamicTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2
This represents the dynamic transit tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesMplsDynamicTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3
Indicates the administrative status of the dynamic transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4
Indicates the operational status of the dynamic transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsDynamicTransitTunnelInLabel 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5
Indicates the incoming label of the dynamic transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048575  

cienaCesMplsDynamicTransitTunnelOutLabel 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6
Indicates the outgoing label of the dynamic transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1048575  

cienaCesMplsDynamicTransitTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.7
Next hop IP address of the Dynamic transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicTransitTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.8
Source IP address of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicTransitTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.9
Destination IP address of the static transit tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsDynamicTransitTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.10
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicTransitTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.11
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicTransitTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.12
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsDynamicTransitTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.1.7.1.13
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsTunnelPath 1.3.6.1.4.1.1271.2.1.18.1.1.8
OBJECT IDENTIFIER    

cienaCesMplsTunnelPathTable 1.3.6.1.4.1.1271.2.1.18.1.1.8.1
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsTunnelPathName and cienaCesMplsTunnelPathRowStatus must both be specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsTunnelPathEntry

cienaCesMplsTunnelPathEntry 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1
An entry in the tunnel path table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsTunnelPathEntry  

cienaCesMplsTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1
A unique index in the path entry table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2
Name associated with the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsTunnelPathUseCount 1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3
Indicates the number of encap tunnels that are using this path.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesMplsTunnelPathHopTable 1.3.6.1.4.1.1271.2.1.18.1.1.8.2
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsTunnelPathHopIpAddr and cienaCesMplsTunnelPathHopRowStatus must both be specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsTunnelPathHopEntry

cienaCesMplsTunnelPathHopEntry 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1
A tunnel hop entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsTunnelPathHopEntry  

cienaCesMplsTunnelPathHopIndex 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1
Unique index in the path hop table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsTunnelPathHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2
IP address associated with this hop. This object cannot be modified once the path hop is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsTunnelPathHopType 1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

cienaCesMplsEncapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.9
OBJECT IDENTIFIER    

cienaCesMplsNotifEncapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.9.1
Table of notification objects required for encap tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsNotifEncapTunnelEntry

cienaCesMplsNotifEncapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsNotifEncapTunnelEntry  

cienaCesMplsNotifEncapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1
Tunnel index of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifEncapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2
Encap tunnel type of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), frr(3)  

cienaCesMplsNotifEncapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3
This represents the encap tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifEncapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4
Administrative state of the encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifEncapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5
Operational state of the encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifEncapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.6
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesMplsNotifEncapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.7
IP address of the node with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesMplsTransitTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.10
OBJECT IDENTIFIER    

cienaCesMplsNotifTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.10.1
Table of notification objects required for transit tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsNotifTransitTunnelEntry

cienaCesMplsNotifTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1
An entry (conceptual row) in the cienaCesMplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsNotifTransitTunnelEntry  

cienaCesMplsNotifTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1
Tunnel index of the transit tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifTransitTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2
Transit tunnel type of the transit tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesMplsNotifTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3
This represents the transit tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4
Administrative state of the transit tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5
Operational state of the transit tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifTransitTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.6
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesMplsEncapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.1.11
OBJECT IDENTIFIER    

cienaCesMplsNotifEncapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.1.11.1
Table of notification objects required for encap tunnel group notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsNotifEncapTunnelGrpEntry

cienaCesMplsNotifEncapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1
An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsNotifEncapTunnelGrpEntry  

cienaCesMplsNotifEncapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1
Tunnel group index of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifEncapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2
Tunnel group name of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3
Active Encap Tunnel index of the tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4
Active Encap Tunnel name of the Tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType 1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5
Encap tunnel type of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2), frr(3)  

cienaCesMplsAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.12
The table listing the MPLS Associated tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsAssociatedTunnelEntry

cienaCesMplsAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.12.1
This represents an entry of the MPLS associated tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsAssociatedTunnelEntry  

cienaCesMplsAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.1
Unique index in the table. Specifies mpls associated tunnel index
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.2
specifies mpls associated tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedForwardTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.3
specifies associated forward tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedForwardTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.4
specifies associated forward tunnel type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedReverseTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.5
specifies associated reverse tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedReverseTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.6
specifies associated reverse tunnel type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedForwardTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.7
specifies associated mpls forward tunnel destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsAssociatedDynamicTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.8
specifies associated mpls reverse tunnel source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.9
Administrative status of associated tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.10
Operational status of associated tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsAssociatedForwardTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.11
Operational status of associated forward tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsAssociatedReverseTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.12
Operational status of associated reverse tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsAssociatedProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.13
specifies the protection role of the associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesMplsAssociatedProtectionState 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.14
specifies the protection status of the associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesMplsAssociatedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.15
This object represents the tunnel name it is protecting
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.16
Specifies status of BFD monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsAssociatedBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.17
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.18
Specifies BFD session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsAssociatedBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.19
Indicates if BFD is faulted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesMplsAssociatedBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.12.1.20
This represents the BFD profile index in the BFD profile table configured for this associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsTunnelARHopTable 1.3.6.1.4.1.1271.2.1.18.1.1.13
The mplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in mplsTunnelTable, as reported by the MPLS signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the mplsTunnelHopTable or the mplsTunnelCHopTable. Each row in this table is indexed by mplsTunnelARHopListIndex. Each row also has a secondary index mplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some MPLS signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the MPLS signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the mplsTunnelLastPathChange object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsTunnelARHopEntry

cienaCesMplsTunnelARHopEntry 1.3.6.1.4.1.1271.2.1.18.1.1.13.1
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsTunnelARHopEntry  

cienaMplsTunnelARHopListIndex 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.1
Primary index into this table identifying a particular recorded hop list.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaMplsTunnelARHopIndex 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.2
Secondary index into this table identifying the particular hop.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaMplsTunnelARHopAddrType 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.3
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaMplsTunnelARHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.4
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelARHopAddrType. If mplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaMplsTunnelARHopAddrUnnum 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.5
If mplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with mplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaMplsTunnelARHopLspId 1.3.6.1.4.1.1271.2.1.18.1.1.13.1.6
If mplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsAssociatedTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.1.14
OBJECT IDENTIFIER    

cienaCesMplsNotifAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.1.14.1
Table of notification objects required for associated tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsNotifAssociatedTunnelEntry

cienaCesMplsNotifAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1
An entry (conceptual row) in the cienaCesMplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsNotifAssociatedTunnelEntry  

cienaCesMplsNotifAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.1
Tunnel index of the associated tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifAssociatedTunnelType 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.2
Associated tunnel type of the associated tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesMplsNotifAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.3
This represents the associated tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.4
Administrative state of the associated tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.5
Operational state of the associated tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsNotifAssociatedTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.6
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesMplsNotifAssociatedTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.7
IP address of the node with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesMplsCacInterfaceNotif 1.3.6.1.4.1.1271.2.1.18.1.1.15
OBJECT IDENTIFIER    

cienaCesMplsNotifCacInterfaceTable 1.3.6.1.4.1.1271.2.1.18.1.1.15.1
Table of notification objects required for CAC interface notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsNotifCacInterfaceEntry

cienaCesMplsNotifCacInterfaceEntry 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1
An entry (conceptual row) in the cienaCesMplsNotifCACInterfaceTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsNotifCacInterfaceEntry  

cienaCesMplsNotifCacInterfaceIndex 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.1
CAC entry index associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsNotifCacInterfaceClassType 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.2
CAC class type value of the associated interface associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsNotifCacInterfaceName 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.3
This represents the associated interface name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsNotifCacInterfaceThreshold 1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.4
Alarm threshold value of the associated interface associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsClassProfileTable 1.3.6.1.4.1.1271.2.1.18.1.1.16
The (conceptual) table listing the MPLS Class Profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsClassProfileEntry

cienaCesMplsClassProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.1.16.1
This represents an entry for MPLS Class Profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsClassProfileEntry  

cienaCesMplsClassProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.1
This represents the unique index for MPLS Class Profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..500  

cienaCesMplsClassProfileName 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.2
This represents the MPLS Class Profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsClassProfileCacPolicy 1.3.6.1.4.1.1271.2.1.18.1.1.16.1.3
MPLS Class Profile Cac policy.
Status: current Access: read-only
OBJECT-TYPE    
  CacPolicy  

cienaCesMplsTEClassTypeTable 1.3.6.1.4.1.1271.2.1.18.1.1.17
The (conceptual) table listing the MPLS Class Types.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsTEClassTypeEntry

cienaCesMplsTEClassTypeEntry 1.3.6.1.4.1.1271.2.1.18.1.1.17.1
This represents an entry for MPLS Class Type.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsTEClassTypeEntry  

cienaCesMplsClassType 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.1
Indicates the MPLS Class Type value. Used as an Index in combination with MPLS Class Profile Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsClassTypeQueueGroupIndex 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.2
Indicates the queue group index associated with MPLS Class Type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..500  

cienaCesMplsClassTypeQueueGroupInstance 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.3
Indicates the instance for MPLS Class Type mapped to a particular queue group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65534  

cienaCesMplsClassTypeLom 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.4
Indicates the link multiplier value for the MPLS Class Type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4  

cienaCesMplsClassTypeAlarmThreshold 1.3.6.1.4.1.1271.2.1.18.1.1.17.1.5
Indicates the Alarm Threshold percentage (%) for MPLS Class Type.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

cienaCesMplsTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.1
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifEncapTunnelIndex, cienaCesMplsNotifEncapTunnelType, cienaCesMplsNotifEncapTunnelName, cienaCesMplsNotifEncapTunnelAdminState, cienaCesMplsNotifEncapTunnelOperState, cienaCesMplsNotifEncapTunnelOamFaulted, cienaCesMplsNotifEncapTunnelFaultNodeId.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesMplsEncapTunnelGrpActiveEncapTunnelChange 1.3.6.1.4.1.1271.2.2.17.0.2
This notification is sent whenever the active encap tunnel in a tunnel group changes.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesMplsTransitTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.3
This notification is sent when the operational state of a transit tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifTransitTunnelIndex, cienaCesMplsNotifTransitTunnelType, cienaCesMplsNotifTransitTunnelName, cienaCesMplsNotifTransitTunnelAdminState, cienaCesMplsNotifTransitTunnelOperState, cienaCesMplsNotifTransitTunnelOamFaulted.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesMplsAssociatedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.0.6
This notification is sent when the operational state of an associated tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifAssociatedTunnelIndex, cienaCesMplsNotifAssociatedTunnelType, cienaCesMplsNotifAssociatedTunnelName, cienaCesMplsNotifAssociatedTunnelAdminState, cienaCesMplsNotifAssociatedTunnelOperState, cienaCesMplsNotifAssociatedTunnelOamFaulted, cienaCesMplsNotifAssociatedTunnelFaultedNodeId.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesMplsCacInterfaceThresholdTrap 1.3.6.1.4.1.1271.2.2.17.0.7
This notification is sent when LSP bandwith usage exceeds the threshold. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesMplsNotifCasInterfaceIndex, cienaCesMplsNotifCacInterfaceClassType, cienaCesMplsNotifCacInterfaceName, cienaCesMplsNotifCacInterfaceThreshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

cienaCesGmplsStaticIngressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.1
The (conceptual) table listing the MPLS static encap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticIngressUniDirTunnelEntry

cienaCesGmplsStaticIngressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.1.1
This represents an entry of the MPLS static encap TP unidirectional tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticIngressUniDirTunnelEntry  

cienaCesGmplsStaticIngressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticIngressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.2
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesGmplsStaticIngressUniDirTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.3
Specifies the next hop IP address for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.4
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.5
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.6
Specifies the administrative status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.7
Specifies the operational status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.8
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressUniDirTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.9
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.10
Protection partner name of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressUniDirTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.11
Specifies the Protection status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsStaticIngressUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.12
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsStaticIngressUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.13
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticIngressUniDirTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.14
The group ID of the tunnel group of which the static encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressUniDirTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.15
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsStaticIngressUniDirTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.16
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.17
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesGmplsStaticIngressUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.18
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.1.1.19
Specifies the type of Recovery Disjoint
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link(2), node(3), srlg(4), unknown(5)  

cienaCesGmplsStaticIngressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.2
The (conceptual) table listing the MPLS static encap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticIngressCoroutedTunnelEntry

cienaCesGmplsStaticIngressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.2.1
This represents an entry of the MPLS static encap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticIngressCoroutedTunnelEntry  

cienaCesGmplsStaticIngressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticIngressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.2
This represents the encap tunnel name. Tunnel names are common across static and dynamic.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesGmplsStaticIngressCoroutedTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.3
Specifies the next hop IP address for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4
Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.5
Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticIngressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.6
Specifies the administrative status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.7
Specifies the operational status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.8
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.9
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.10
The label for the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.11
Protection partner name of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.12
Specifies the Protection status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.13
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsStaticIngressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.14
If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticIngressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.15
The group ID of the tunnel group of which the static encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.16
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.17
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.18
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesGmplsStaticIngressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.19
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.20
Specifies status of BFD monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.21
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.22
Specifies BFD session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.23
Specifies status of AIS monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticIngressCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.24
This object represent AIS profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.25
Indicates if BFD is faulted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.26
This represents the BFD profile index in the BFD profile table configured for this gmpls static ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.27
Specifies the type of Recovery Disjoint
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link(2), node(3), srlg(4), unknown(5)  

cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.28
This represents next hop interface number for this gmpls static ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.29
This represents LSP ID for this gmpls static ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.30
This represents source tunnel ID for this gmpls static ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.2.1.31
This represents destination tunnel ID for this gmpls static ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.3
The (conceptual) table listing the MPLS Dynamic encap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicIngressUniDirTunnelEntry

cienaCesGmplsDynamicIngressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.3.1
This represents an entry of the MPLS Dynamic encap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicIngressUniDirTunnelEntry  

cienaCesGmplsDynamicIngressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.2
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsDynamicIngressUniDirTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.3
A unique index within a tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4
Specifies the next hop IP address for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.5
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.7
Specifies the administrative status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicIngressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.8
Specifies the operational status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.9
The label for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressUniDirTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.10
The label for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.11
Protection partner name of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressUniDirTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.12
Specifies the Protection status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.13
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsDynamicIngressUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.14
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsDynamicIngressUniDirTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.15
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressUniDirTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.16
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.17
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.18
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.19
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressUniDirTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.20
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsDynamicIngressUniDirTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.21
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link-protect(2), node-protect(3)  

cienaCesGmplsDynamicIngressUniDirTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.22
Indicates the set up priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesGmplsDynamicIngressUniDirTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.23
Indicates the holding priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesGmplsDynamicIngressUniDirTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.24
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressUniDirTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.25
The path name corresponding to the pathIndex object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26
This object represents the bandwidth profile attached to this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressUniDirTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.2.3.1.27
The OID must be one of the entries in mplsTunnelResourceTable.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

cienaCesGmplsDynamicIngressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.4
The (conceptual) table listing the MPLS Dynamic encap co-routed tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicIngressCoroutedTunnelEntry

cienaCesGmplsDynamicIngressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.4.1
This represents an entry of the MPLS Dynamic encap co-routed tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicIngressCoroutedTunnelEntry  

cienaCesGmplsDynamicIngressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2
This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIp 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3
Specifies the next hop IP address for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4
Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5
Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicIngressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6
Specifies the administrative status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicIngressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7
Specifies the operational status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8
The label for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9
The label for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10
The label for the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11
Protection partner name of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12
Specifies the Protection status of the Dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelRecordRoute 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20
Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsDynamicIngressCoroutedTunnelFastRoute 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21
Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link-protect(2), node-protect(3)  

cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriority 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22
Indicates the set up priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriority 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23
Indicates the holding priority of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesGmplsDynamicIngressCoroutedTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24
Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressCoroutedTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25
The path name corresponding to the pathIndex object.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfile 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26
This object represents the bandwidth profile attached to this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointer 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27
The OID must be one of the entries in mplsTunnelResourceTable.
Status: current Access: read-only
OBJECT-TYPE    
  RowPointer  

cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28
Specifies status of BFD monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30
Specifies BFD session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31
Indicates if BFD is faulted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnable 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33
Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimization 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34
Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsGlobalState  

cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeInterval 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35
Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..60  

cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointType 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36
Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.
Status: current Access: read-only
OBJECT-TYPE    
  PathDisjointType  

cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointMode 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37
Indicates mode used for path diversification for this tunnel .
Status: current Access: read-only
OBJECT-TYPE    
  PathDisjointMode  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnable 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38
Indicates if auto-size is enabled for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsGlobalState  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeInterval 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39
Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 5..60  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlr 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40
Indicates auto-sizing failure handler for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  AutoSizeFailHdlr  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeState 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41
Indicates dynamic auto-sizing states for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  AutoSizeState  

cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeMode 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42
Indicates auto-sizing mode for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  AutoSizeMode  

cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43
Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44
Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45
Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46
Indicates auto-size current bandwidth(in kbps) for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47
Indicates auto-size requested bandwidth(in kbps) for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidth 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48
Indicates auto-size used bandwidth(in kbps) for this tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate  

cienaCesGmplsDynamicIngressCoroutedTunnelClassType 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49
Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAll 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50
Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAny 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51
Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAny 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52
Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicIngressCoroutedLspId 1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53
Indicates the Ingress LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.5
The (conceptual) table listing the MPLS decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticEgressUniDirTunnelEntry

cienaCesGmplsStaticEgressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.5.1
An entry in the static decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticEgressUniDirTunnelEntry  

cienaCesGmplsStaticEgressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.2
This represents the decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesGmplsStaticEgressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.3
Administrative status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.4
Indicates the operational status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.5
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.6
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.7
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.5.1.8
Indicates the label of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticEgressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.6
The (conceptual) table listing the MPLS decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticEgressCoroutedTunnelEntry

cienaCesGmplsStaticEgressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.6.1
An entry in the static decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticEgressCoroutedTunnelEntry  

cienaCesGmplsStaticEgressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.2
This represents the decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesGmplsStaticEgressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.3
Administrative status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.4
Indicates the operational status of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.5
Prev hop IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.6
Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.7
destination IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticEgressCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.8
Indicates the in label of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticEgressCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.9
Indicates the out label of the static decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticEgressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.10
specifies protection tunnel role.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsStaticEgressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.11
Protection partner name of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticEgressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12
Specifies the Protection status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsStaticEgressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.13
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.14
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsStaticEgressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.15
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticEgressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.16
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticEgressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.17
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticEgressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.18
Specifies status of BFD monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.19
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.20
Specifies BFD session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticEgressCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.21
Specifies status of AIS monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticEgressCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.22
This object represent AIS profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.23
Indicates if BFD is faulted.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.24
This represents the BFD profile index in the BFD profile table configured for this gmpls static egress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticEgressCoroutedTunnelRecoveryDisjoint 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.25
Specifies the type of Recovery Disjoint
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), link(2), node(3), srlg(4), unknown(5)  

cienaCesGmplsStaticEgressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.26
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsStaticEgressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.27
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.28
This represents previous hop interface number for this gmpls static egress corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.29
This represents LSP ID for this gmpls static egress corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.30
This represents source tunnel ID for this gmpls static egress corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticEgressCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.6.1.31
This represents source tunnel ID for this gmpls static egress corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.7
The (conceptual) table listing the MPLS dynamic decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicEgressUniDirTunnelEntry

cienaCesGmplsDynamicEgressUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.7.1
An entry in the dynamic decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicEgressUniDirTunnelEntry  

cienaCesGmplsDynamicEgressUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.2
This represents the dynamic decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsDynamicEgressUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.3
Indicates the administrative status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicEgressUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.4
Indicates the operational status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicEgressUniDirLspId 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.5
Indicates the LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.6
Source IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.7
Source IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.8
Destination IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.7.1.9
Idicates the label of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.8
The (conceptual) table listing the MPLS dynamic decap tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicEgressCoroutedTunnelEntry

cienaCesGmplsDynamicEgressCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.8.1
An entry in the dynamic decap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicEgressCoroutedTunnelEntry  

cienaCesGmplsDynamicEgressCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.2
This represents the dynamic decap tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsDynamicEgressCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.3
Indicates the administrative status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicEgressCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.4
Indicates the operational status of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicEgressCoroutedLspId 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.5
Indicates the LSP ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.6
Prev hop IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.7
Source IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.8
Destination IP address of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicEgressCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.9
Idicates the label of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.10
Indicates the out label of the dynamic decap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicEgressCoroutedTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.11
specifies role of this dynamic tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsDynamicEgressCoroutedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.12
Protection partner name of the dynamic encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicEgressCoroutedTunnelProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.13
Specifies the Protection status of the static encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsDynamicEgressCoroutedTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.14
The group ID of the tunnel group of which the Dynamic encap tunnel is a member.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicEgressCoroutedTunnelReversion 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.15
Indicates whether tunnel reversion is turned on/off for this encap tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeout 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16
This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.17
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.18
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicEgressCoroutedTunnelBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.19
This parameter indicates if BFD monitoring is enabled or disableb on tunnel
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.20
It Indicates assigned BFD profile names to tunnel
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.21
It Indicates BFD session names.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.22
Specifies if BFD faulted
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.23
This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic egress corouted tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsDynamicEgressCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.24
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsDynamicEgressCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.8.1.25
If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticTransitUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.9
The (conceptual) table listing the MPLS static TransitUniDir tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticTransitUniDirTunnelEntry

cienaCesGmplsStaticTransitUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.9.1
An entry in the static TransitUniDir tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticTransitUniDirTunnelEntry  

cienaCesGmplsStaticTransitUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.2
This represents the static TransitUniDir tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsStaticTransitUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.3
Indicates the administrative status of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.4
Indicates the operational status of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.5
Source IP address of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.6
Destination IP address of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitUniDirTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.7
Next hop IP address of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitUniDirTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.8
Previous hop IP address of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.9
Indicates the incoming label of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.10
Indicates the outgoing label of the static TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.11
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsStaticTransitUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.12
If the TTL policy for the static TransitUniDir tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticTransitUniDirTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.13
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticTransitUniDirTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.14
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticTransitUniDirTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.15
Specifies AIS monitoring's status.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitUniDirTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.16
This object contais AIS profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticTransitUniDirTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.17
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitUniDirTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.18
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitUniDirTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.19
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitUniDirTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.9.1.20
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.10
The (conceptual) table listing the MPLS static TransitCorouted tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsStaticTransitCoroutedTunnelEntry

cienaCesGmplsStaticTransitCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.10.1
An entry in the static TransitCorouted tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsStaticTransitCoroutedTunnelEntry  

cienaCesGmplsStaticTransitCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.2
This represents the static TransitCorouted tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsStaticTransitCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.3
Indicates the administrative status of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.4
Indicates the operational status of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.5
Source IP address of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.6
Destination IP address of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitCoroutedTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.7
Next hop IP address of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.8
Previous hop IP address of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsStaticTransitCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.9
Indicates the incoming label of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.10
Indicates the outgoing label of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.11
Indicates the incoming label of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.12
Indicates the outgoing label of the static TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsStaticTransitCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.13
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsStaticTransitCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.14
If the TTL policy for the static TransitCorouted tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsStaticTransitCoroutedTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.15
This object represents Cos profile index
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsStaticTransitCoroutedTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.16
Specifies the name of Cos profile
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticTransitCoroutedTunnelAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.17
specifies AIS monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsStaticTransitCoroutedTunnelAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.18
This object contains AIS profile name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.19
This represents previous hop interface number for this gmpls transit corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelNextHopIfNum 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.20
This represents next hop interface number for this gmpls transit corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelLspId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.21
This represents LSP ID for this gmpls transit corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelSrcTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.22
This represents source tunnel ID for this gmpls transit corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelDestTunnelId 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.23
This represents destination tunnel ID for this gmpls transit corouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.24
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.25
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.26
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.27
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.28
The number of reverse direction incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.29
The number of reverse direction outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.30
The number of reverse direction incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.10.1.31
The number of reverse direction outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitUniDirTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.11
The (conceptual) table listing the MPLS Dynamic TransitUniDir tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicTransitUniDirTunnelEntry

cienaCesGmplsDynamicTransitUniDirTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.11.1
An entry in the Dynamic TransitUniDir tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicTransitUniDirTunnelEntry  

cienaCesGmplsDynamicTransitUniDirTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitUniDirTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.2
This represents the Dynamic TransitUniDir tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsDynamicTransitUniDirTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.3
Indicates the administrative status of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicTransitUniDirTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.4
Indicates the operational status of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicTransitUniDirTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.5
Source IP address of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitUniDirTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.6
Destination IP address of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitUniDirTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.7
Next hop IP address of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitUniDirTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.8
Indicates the incoming label of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitUniDirTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.9
Indicates the outgoing label of the Dynamic TransitUniDir tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitUniDirTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.10
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsDynamicTransitUniDirTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.11
If the TTL policy for the Dynamic TransitUniDir tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsDynamicTransitUniDirTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.12
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitUniDirTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.13
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitUniDirTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.14
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitUniDirTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.11.1.15
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.12
The (conceptual) table listing the MPLS Dynamic TransitCoRouted tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsDynamicTransitCoroutedTunnelEntry

cienaCesGmplsDynamicTransitCoroutedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.12.1
An entry in the Dynamic TransitCorouted tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsDynamicTransitCoroutedTunnelEntry  

cienaCesGmplsDynamicTransitCoroutedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.1
This represents the unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.2
This represents the Dynamic TransitCorouted tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..32)  

cienaCesGmplsDynamicTransitCoroutedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.3
Indicates the administrative status of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicTransitCoroutedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.4
Indicates the operational status of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsDynamicTransitCoroutedTunnelSourceIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.5
Source IP address of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitCoroutedTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.6
Destination IP address of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitCoroutedTunnelNextHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.7
Next hop IP address of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitCoroutedTunnelPrevHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.8
Previous hop IP address of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsDynamicTransitCoroutedTunnelForwardInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.9
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitCoroutedTunnelForwardOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.10
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseInLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.11
Indicates the incoming label of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutLabel 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.12
Indicates the outgoing label of the Dynamic TransitCorouted tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..1048575  

cienaCesGmplsDynamicTransitCoroutedTunnelTTLPolicy 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.13
Specifies whether TTL is fixed or inherited from the frame.
Status: current Access: read-only
OBJECT-TYPE    
  TTLPolicy  

cienaCesGmplsDynamicTransitCoroutedTunnelFixedTTL 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.14
If the TTL policy for the Dynamic TransitCorouted tunnel is fixed, then this object is the TTL value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

cienaCesGmplsDynamicTransitCoroutedTunnelIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.15
The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.16
The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.17
The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.18
The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.19
The number of reverse incoming packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.20
The number of reverse outgoing packets for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21
The number of reverse incoming bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22
The number of reverse outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.13
The (conceptual) table listing the Gmpls Associated tunnels.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsAssociatedTunnelEntry

cienaCesGmplsAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.13.1
This represents an entry of the Gmpls static encap tunnel table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsAssociatedTunnelEntry  

cienaCesGmplsAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.1
Unique tunnel index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.2
specifies Gmpls associated tunnel name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedForwardTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.3
specifies associated forward tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedForwardTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.4
specifies associated forward tunnel type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedReverseTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.5
specifies associated reverse tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedReverseTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.6
specifies associated reverse tunnel type.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedForwardTunnelDestIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.7
specifies associated Gmpls forward tunnel destination IP address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsAssociatedDynamicTunnelSrcIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.8
specifies associated Gmpls reverse tunnel source IP address.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.9
Administrator status of associated tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.10
Operational status of associated tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedForwardTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.11
Operational status of associated forward tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedReverseTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.12
Operational status of associated reverse tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.13
specifies the protection role of the associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsAssociatedProtectionState 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.14
specifies the protection status of the associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER standby(0), active(1)  

cienaCesGmplsAssociatedTunnelProtectionPartnerName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.15
This object represents the tunnel name it is protecting
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedBfdMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.16
Specifies status of BFD monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedBfdProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.17
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedBfdSessionName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.18
Specifies BFD session name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedAisMonitoring 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.19
Specifies status of AIS monitoring.
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsAssociatedAisProfileName 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.20
This object represent BFD profile name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsAssociatedBfdSessionFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.21
Specifies BFD session error code.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaCesGmplsAssociatedBfdProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.2.13.1.22
This represents the BFD profile index in the BFD profile table configured for this gmpls associated tunnel
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsTunnelARHopTable 1.3.6.1.4.1.1271.2.1.18.1.2.14
The GmplsTunnelARHopTable is used to indicate the hops for an Gmpls tunnel defined in GmplsTunnelTable, as reported by the Gmpls signalling protocol. Thus at a transit LSR, this table (if the table is supported and if the signaling protocol is recording actual route information) contains the actual route of the whole tunnel. If the signaling protocol is not recording the actual route, this table MAY report the information from the GmplsTunnelHopTable or the GmplsTunnelCHopTable. Each row in this table is indexed by GmplsTunnelARHopListIndex. Each row also has a secondary index GmplsTunnelARHopIndex, corresponding to the next hop that this row corresponds to. Please note that since the information necessary to build entries within this table is not provided by some Gmpls signalling protocols, implementation of this table is optional. Furthermore, since the information in this table is actually provided by the Gmpls signalling protocol after the path has been set-up, the entries in this table are provided only for observation, and hence, all variables in this table are accessible exclusively as read- only. Note also that the contencts of this table may change while it is being read because of re-routing activities. A network administrator may verify that the actual route read is consistent by reference to the GmplsTunnelLastPathChange object.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsTunnelARHopEntry

cienaCesGmplsTunnelARHopEntry 1.3.6.1.4.1.1271.2.1.18.1.2.14.1
An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an Gmpls signalling protocol.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsTunnelARHopEntry  

cienaGmplsTunnelARHopListIndex 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.1
Primary index into this table identifying a particular recorded hop list.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaGmplsTunnelARHopIndex 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.2
Secondary index into this table identifying the particular hop.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaGmplsTunnelARHopAddrType 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.3
The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

cienaGmplsTunnelARHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.4
The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding GmplsTunnelARHopAddrType. If GmplsTunnelARHopAddrType is set to unnum(4), then this value contains the LSR Router ID of the unnumbered interface. Otherwise the agent SHOULD set this object to the zero-length string and the manager should ignore this object.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaGmplsTunnelARHopAddrUnnum 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.5
If GmplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with GmplsTunnelARHopIpAddr which would contain the LSR Router ID in this case. Otherwise the agent should set this object to zero-length string and the manager should ignore this.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaGmplsTunnelARHopLspId 1.3.6.1.4.1.1271.2.1.18.1.2.14.1.6
If GmplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesGmplsEncapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.15
OBJECT IDENTIFIER    

cienaCesGmplsNotifEncapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.15.1
Table of notification objects required for encap tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifEncapTunnelEntry

cienaCesGmplsNotifEncapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifEncapTunnelEntry  

cienaCesGmplsNotifEncapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.1
Tunnel index of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifEncapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.2
Encap tunnel type of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsNotifEncapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.3
This represents the encap tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifEncapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.4
Administrative state of the encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifEncapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.5
Operational state of the encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifEncapTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.6
This is replaced by cienaCesGmplsNotifOamTunnelAisFaulted.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  TunnelAisFault  

cienaCesGmplsNotifEncapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.7
IP address of the node with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifEncapTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.8
IP address of the far end LER for the tunne with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifEncapTunnelResult 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.9
specifies the result of encap tunnel auto sizing/MBB.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER success(1), fail(2)  

cienaCesGmplsNotifEncapTunnelProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.10
specifies the protection role of the dynamic encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER none(0), primary(1), backup(2)  

cienaCesGmplsNotifEncapTunnelRequestedBw 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.11
specifies the requested bandwidth of the dynamic encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifEncapTunnelOperationalBw 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.12
specifies the operational bandwidth of the dynamic encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifEncapTunnelMbbParentApp 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.13
specifies the parent application using MBB of the dynamic encap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER none(1), autosize(2), lspreoptimization(3)  

cienaCesGmplsNotifEncapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.14
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesGmplsDecapTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.16
OBJECT IDENTIFIER    

cienaCesGmplsNotifDecapTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.16.1
Table of notification objects required for decap tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifDecapTunnelEntry

cienaCesGmplsNotifDecapTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1
An entry (conceptual row) in the cienaCesGmplsNotifDecapTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifDecapTunnelEntry  

cienaCesGmplsNotifDecapTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.1
Tunnel index of the decap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifDecapTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.2
Decap tunnel type of the decap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsNotifDecapTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.3
This represents the decap tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifDecapTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.4
Administrative state of the decap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifDecapTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.5
Operational state of the decap tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifDecapTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.6
This is replaced by cienaCesGmplsNotifDecapTunnelOamFaulted.
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  TunnelAisFault  

cienaCesGmplsNotifDecapTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.7
IP address of the node with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifDecapTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.8
IP address of the far end LER for the tunne with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifDecapTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.9
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesGmplsTransitTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.17
OBJECT IDENTIFIER    

cienaCesGmplsNotifTransitTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.17.1
Table of notification objects required for transit tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifTransitTunnelEntry

cienaCesGmplsNotifTransitTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1
An entry (conceptual row) in the cienaCesGmplsNotifTransitTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifTransitTunnelEntry  

cienaCesGmplsNotifTransitTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.1
Tunnel index of the transit tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifTransitTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.2
Transit tunnel type of the transit tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsNotifTransitTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.3
This represents the transit tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifTransitTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.4
Administrative state of the transit tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifTransitTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.5
Operational state of the transit tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifTransitTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.6
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesGmplsAssociatedTunnelNotif 1.3.6.1.4.1.1271.2.1.18.1.2.18
OBJECT IDENTIFIER    

cienaCesGmplsNotifAssociatedTunnelTable 1.3.6.1.4.1.1271.2.1.18.1.2.18.1
Table of notification objects required for associated tunnel notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifAssociatedTunnelEntry

cienaCesGmplsNotifAssociatedTunnelEntry 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1
An entry (conceptual row) in the cienaCesGmplsNotifAssociatedTunnelTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifAssociatedTunnelEntry  

cienaCesGmplsNotifAssociatedTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.1
Tunnel index of the associated tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifAssociatedTunnelType 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.2
Associated tunnel type of the associated tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsNotifAssociatedTunnelName 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.3
This represents the associated tunnel name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifAssociatedTunnelAdminState 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.4
Administrative state of the associated tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifAssociatedTunnelOperState 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.5
Operational state of the associated tunnel.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CienaGlobalState  

cienaCesGmplsNotifAssociatedTunnelAisFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.6
Replaced by cienaCesGmplsNotifAssociatedTunnelOamFaulted
Status: obsolete Access: accessible-for-notify
OBJECT-TYPE    
  TunnelAisFault  

cienaCesGmplsNotifAssociatedTunnelFaultedNodeId 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.7
IP address of the node with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifAssociatedTunnelFarEndLerId 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.8
IP address of the far end LER for the tunne with the AIS fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesGmplsNotifAssociatedTunnelOamFaulted 1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.9
Indication if the tunnel has Oam fault.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  TunnelOamFault  

cienaCesGmplsEncapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.2.19
OBJECT IDENTIFIER    

cienaCesGmplsNotifEncapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.2.19.1
Table of notification objects required for encap tunnel group notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifEncapTunnelGrpEntry

cienaCesGmplsNotifEncapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1
An entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifEncapTunnelGrpEntry  

cienaCesGmplsNotifEncapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.1
Tunnel group index of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifEncapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.2
Tunnel group name of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.3
Active Encap Tunnel index of the tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlName 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.4
Active Encap Tunnel name of the Tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlType 1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.5
Encap tunnel type of the encap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsDecapTunnelGrpNotif 1.3.6.1.4.1.1271.2.1.18.1.2.20
OBJECT IDENTIFIER    

cienaCesGmplsNotifDecapTunnelGrpTable 1.3.6.1.4.1.1271.2.1.18.1.2.20.1
Table of notification objects required for decap tunnel group notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifDecapTunnelGrpEntry

cienaCesGmplsNotifDecapTunnelGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1
An entry(conceptual row) in the cienaCesGmplsNotifDecapTunnelGrpTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifDecapTunnelGrpEntry  

cienaCesGmplsNotifDecapTunnelGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.1
Tunnel group index of the decap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifDecapTunnelGrpName 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.2
Tunnel group name of the decap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlIndex 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.3
Active Decap Tunnel index of the tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlName 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.4
Active Decap Tunnel name of the Tunnel group associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlType 1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.5
Decap tunnel type of the decap tunnel associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesGmplsTunnelAisFaultErrorNotif 1.3.6.1.4.1.1271.2.1.18.1.2.21
OBJECT IDENTIFIER    

cienaCesGmplsNotifTunnelAisFaultErrorTable 1.3.6.1.4.1.1271.2.1.18.1.2.21.1
Table of notification objects required for tunnel Ais Fault error notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesGmplsNotifTunnelAisFaultErrorEntry

cienaCesGmplsNotifTunnelAisFaultErrorEntry 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1
An entry (conceptual row) in the cienaCesGmplsNotifTunnelAisFaultErrorTable No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesGmplsNotifTunnelAisFaultErrorEntry  

cienaCesGmplsNotifTunnelDecapLabel 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.1
Decap label associated with the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesGmplsNotifTunnelErrorMsg 1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.2
This represents the fault error message for decap label associated with the notification
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesGmplsEncapUnidirTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.1
This notification is sent when the operational state of an encap uni-direction tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.2
This notification is sent when the operational state of an encap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelAdminState, cienaCesGmplsNotifEncapTunnelOperState, cienaCesGmplsNotifEncapTunnelOamFaulted, cienaCesGmplsNotifEncapTunnelFaultedNodeId.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsDecapCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.3
This notification is sent when the operational state of an decap corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifDecapTunnelIndex, cienaCesGmplsNotifDecapTunnelType, cienaCesGmplsNotifDecapTunnelName, cienaCesGmplsNotifDecapTunnelAdminState, cienaCesGmplsNotifDecapTunnelOperState, cienaCesGmplsNotifDecapTunnelOamFaulted, cienaCesGmplsNotifDecapTunnelFaultedNodeId.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsTransitUnidirTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.4
This notification is sent when the operational state of a transit uni-direcition tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsTransitCoroutedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.5
This notification is sent when the operational state of a transit corouted tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex, cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName, cienaCesGmplsNotifTransitTunnelAdminState, cienaCesGmplsNotifTransitTunnelOperState, cienaCesGmplsNotifTransitTunnelOamFaulted.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapUnidirTunnelGrpActiveEncapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.6
This notification is sent whenever the active encap tunnel in an encap uni-direction tunnel group changes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapCoroutedTunnelGrpActiveEncapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.7
This notification is sent whenever the active encap tunnel in an encap corouted tunnel group changes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsDecapCoroutedTunnelGrpActiveDecapTunnelChangeTrap 1.3.6.1.4.1.1271.2.2.17.1.8
This notification is sent whenever the active decap tunnel in a decap corouted tunnel group changes.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsAssociatedTunnelOperStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.9
This notification is sent when the operational state of an encap tunnel changes. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifAssociatedTunnelIndex, cienaCesGmplsNotifAssociatedTunnelType, cienaCesGmplsNotifAssociatedTunnelName, cienaCesGmplsNotifAssociatedTunnelAdminState, cienaCesGmplsNotifAssociatedTunnelOperState, cienaCesGmplsNotifAssociatedTunnelOamFaulted, cienaCesGmplsNotifAssociatedTunnelFaultedNodeId.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapCoroutedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.10
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsDecapCoroutedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.11
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsAssociatedTunnelAisFaultStateChgTrap 1.3.6.1.4.1.1271.2.2.17.1.12
This notification is obsoleted, its functionality is absorbed in the OperState Change notification.
Status: obsolete Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsTunnelAisFaultErrorTrap 1.3.6.1.4.1.1271.2.2.17.1.13
This notification is sent when there is a fault sent for a LSP whose label is not associated with any tunnel. This will happen whenever the AIS admin state is disabled for the bidirectional tunnel. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifTunnelDecapLabel, and cienaCesGmplsNotifTunnelErrorMsg
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapTunnelResizeResultTrap 1.3.6.1.4.1.1271.2.2.17.1.14
This notification is sent when the encap tunnel auto size is done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesGmplsEncapTunnelMbbResultTrap 1.3.6.1.4.1.1271.2.2.17.1.15
This notification is sent when the encap tunnel MBB done Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex, cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName, cienaCesGmplsNotifEncapTunnelResult, cienaCesGmplsNotifEncapTunnelProtectionRole, cienaCesGmplsNotifEncapTunnelRequestdBw and cienaCesGmplsNotifEncapTunnelOperationalBw, cienaCesGmplsNotifEncapTunnelMbbParentApp.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesMplsAttrs 1.3.6.1.4.1.1271.2.1.18.1.3.1
OBJECT IDENTIFIER    

cienaCesMplsGlobalStaticAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.1
The beginning of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.2
The end of the static administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.3
The beginning of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.4
The end of the static operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalDynamicAdminLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.5
The beginning of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalDynamicAdminLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.6
The end of the dynamic administrative label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalDynamicOperLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.7
The beginning of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalDynamicOperLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.8
The end of the dynamic operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticAdminTunnelLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.9
The beginning of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticAdminTunnelLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.10
The end of the static tunnel administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperTunnelLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.11
The beginning of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperTunnelLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.12
The end of the static tunnel operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticAdminVcLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.13
The beginning of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticAdminVcLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.14
The end of the static VC administrative label range. There cannot be any overlap between static and dynamic label ranges. Setting this object does not become effective until the device is rebooted.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperVcLabelRangeStart 1.3.6.1.4.1.1271.2.1.18.1.3.1.15
The beginning of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalStaticOperVcLabelRangeEnd 1.3.6.1.4.1.1271.2.1.18.1.3.1.16
The end of the static VC operational label range. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsGlobalNextFreeStaticVcLabel 1.3.6.1.4.1.1271.2.1.18.1.3.1.17
The next free static VC label. There cannot be any overlap between static and dynamic label ranges.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesMplsTunnelCosProfileTable 1.3.6.1.4.1.1271.2.1.18.1.3.2
Mpls cos-profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsTunnelCosProfileEntry

cienaCesMplsTunnelCosProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.3.2.1
Mpls cos-profile table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsTunnelCosProfileEntry  

cienaCesMplsTunnelCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.1
Unique index for Mpls tunnel Cos profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsTunnelCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.2
Mpls tunnel Cos profile name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsTunnelFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.3
Frame CoS policy of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  FCosPolicy  

cienaCesMplsTunnelFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.4
The frame CoS map ID of tunnel. This value is valid if the frame CoS policy selected for the tunnel is rcos-mapped.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsTunnelFrmCosMapName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.5
Mpls tunnel frame cos Map name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsTunnelFixedTC 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.6
If the frame CoS policy for the tunnel is fixed, this value is used for MPLS encapsulation.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsTunnelRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.7
Resolved CoS policy of the tunnel.
Status: current Access: read-only
OBJECT-TYPE    
  RCosPolicy  

cienaCesMplsTunnelRcosMapName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.8
Mpls tunnel resolved cos Map name. This object is valid only for 39XX and 51XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsTunnelRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.9
The resolved CoS map ID of the tunnel. This value is valid if the resolved CoS policy selected for the tunnel is rcos-mapped. This object is valid only for 39XX and 51XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsTunnelRcosProfileName 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.10
Mpls Tunnel resolved cos Profile name. This object is valid only for 87XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsTunnelRCosProfileId 1.3.6.1.4.1.1271.2.1.18.1.3.2.1.11
The resolved Cos profile ID of the Tunnel. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsGlobalTunnelPath 1.3.6.1.4.1.1271.2.1.18.1.3.3
OBJECT IDENTIFIER    

cienaCesMplsGlobalTunnelPathTable 1.3.6.1.4.1.1271.2.1.18.1.3.3.1
The (conceptual) table listing the MPLS tunnel paths. To create an entry in the tunnel path table, cienaCesMplsGlobalTunnelPathName and cienaCesMplsGlobalTunnelPathRowStatus must both be specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsGlobalTunnelPathEntry

cienaCesMplsGlobalTunnelPathEntry 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1
An entry in the tunnel path table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsGlobalTunnelPathEntry  

cienaCesMplsGlobalTunnelPathIndex 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.1
A unique index in the path entry table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsGlobalTunnelPathName 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.2
Name associated with the path.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsGlobalTunnelPathUseCount 1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.3
Indicates the number of encap tunnels that are using this path.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesMplsGlobalTunnelPathHopTable 1.3.6.1.4.1.1271.2.1.18.1.3.3.2
The (conceptual) table listing the MPLS tunnel path hop. To create an entry in the path-hop table, cienaCesMplsGlobalTunnelPathHopIpAddr and cienaCesMplsGlobalTunnelPathHopRowStatus must both be specified.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsGlobalTunnelPathHopEntry

cienaCesMplsGlobalTunnelPathHopEntry 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1
A tunnel hop entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsGlobalTunnelPathHopEntry  

cienaCesMplsGlobalTunnelPathHopIndex 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.1
Unique index in the path hop table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsGlobalTunnelPathHopIpAddr 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.2
IP address associated with this hop. This object cannot be modified once the path hop is created.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsGlobalTunnelPathHopType 1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.3
Indidcates the hop type of the path member. This object cannot be modified once the path hop is created.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER strict(1), loose(2)  

cienaCesMplsGlobalFreeStaticTunnelLabelTable 1.3.6.1.4.1.1271.2.1.18.1.3.4
Mpls Free static Tunnel Label table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsGlobalFreeStaticTunnelLabelEntry

cienaCesMplsGlobalFreeStaticTunnelLabelEntry 1.3.6.1.4.1.1271.2.1.18.1.3.4.1
Mpls Free static Tunnel Label table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsGlobalFreeStaticTunnelLabelEntry  

cienaCesMplsGlobalFreeStaticTunnelLabelIndex 1.3.6.1.4.1.1271.2.1.18.1.3.4.1.1
Unique index for Mpls Free static Tunnel Label table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsGlobalFreeStaticTunnelLabel 1.3.6.1.4.1.1271.2.1.18.1.3.4.1.2
Mpls Free static Tunnel Label.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 16..1048575  

cienaCesTeLinkTable 1.3.6.1.4.1.1271.2.1.18.1.5.1
This table captures the TE-link entries along with their respective attributes.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesTeLinkEntry

cienaCesTeLinkEntry 1.3.6.1.4.1.1271.2.1.18.1.5.1.1
This represents an entry for the TE-Link interface
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesTeLinkEntry  

cienaCesTeIfIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.1
This represents the unique index for TE-Interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesTeInterfaceName 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.2
This represents the TE Interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesTeLinkMetric 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.3
Link cost of the TE-Interface.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesTeResourceColorGroupIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.4
Resource Color Group Index this TE-link is associated to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..64  

cienaCesTeResourceColorBitMask 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.5
This represents individual bit for Resource Color which will be set in Resource Color Group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

cienaCesMplsClassProfIndex 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.6
Class Profile Index this TE-link is associated to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..500  

cienaCesTeLinkMode 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.7
TE mode of the TE-Interface.
Status: current Access: read-only
OBJECT-TYPE    
  TEMode  

cienaCesTeLinkSrlgCount 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.8
This identifies the total number of SRLGs configured on this TE link.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesTeLinkMaximumBandwidth 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.9
Maximum TE-link Bandwidth(in kbps). This is same as the port bandwidth on which this TE-link is created
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkMaximumReservableBandwidth 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.10
Maximum Reservable bandwidth(in kbps) on this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.11
Total Priority 0 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.12
Reserved Priority 0 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio0 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.13
UnReserved Priority 0 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.14
Total Priority 1 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.15
Reserved Priority 1 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio1 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.16
UnReserved Priority 1 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.17
Total Priority 2 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.18
Reserved Priority 2 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio2 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.19
UnReserved Priority 2 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.20
Total Priority 3 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.21
Reserved Priority 3 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio3 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.22
UnReserved Priority 3 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.23
Total Priority 4 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.24
Reserved Priority 4 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio4 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.25
UnReserved Priority 4 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.26
Total Priority 5 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.27
Reserved Priority 5 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio5 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.28
UnReserved Priority 5 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.29
Total Priority 6 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.30
Reserved Priority 6 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio6 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.31
UnReserved Priority 6 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkTotalBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.32
Total Priority 7 Bandwidth(in kbps) allocated in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkReservedBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.33
Reserved Priority 7 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeLinkUnReservedBandwidthPrio7 1.3.6.1.4.1.1271.2.1.18.1.5.1.1.34
UnReserved Priority 7 Bandwidth(in kbps) in this TE-link.
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..1000000000  

cienaCesTeResourceGrpTable 1.3.6.1.4.1.1271.2.1.18.1.5.2
This table captures the Resource Color Group Template entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesTeResGrpEntry

cienaCesTeResGrpEntry 1.3.6.1.4.1.1271.2.1.18.1.5.2.1
An entry in this table exists for each of the Resource color group template.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesTeResGrpEntry  

cienaCesTeResourceColorGrpIndex 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.1
This represents the unique index for Resource Color Group entry. Index 0 is used to get the colors which are not associated to any color group cienaCesTeResourceColorsTable
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..64  

cienaCesTeResourceGrpName 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.2
This represents the name of the Resource Color Group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesTeResourceColorGroupBitMask 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.3
This represents the bitmask value for colors added to this Resource Color Group.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

cienaCesTeResourceColorGroupUseCount 1.3.6.1.4.1.1271.2.1.18.1.5.2.1.4
Indicates the number of Tunnels using this MPLS Resource Color Group.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesTeResourceColorsTable 1.3.6.1.4.1.1271.2.1.18.1.5.3
This table captures the Resource Colors entries. These colors can be associated to any Resource Color Group
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesTeResColorEntry

cienaCesTeResColorEntry 1.3.6.1.4.1.1271.2.1.18.1.5.3.1
An entry in this table exists for each of the Resource colors configured along with its associated Resource Group.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesTeResColorEntry  

cienaCesTeResourceColorIndex 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.1
This represents the unique index for Resource Color entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

cienaCesTeResourceColorName 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.2
This represents the name of the Resource Color.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesTeResourceColorBit 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.3
This represents individual bit for Resource Color which will be set in Resource Color Group's cienaCesTeResourceColorGroupBitMask.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

cienaCesTeResourceColorUseCount 1.3.6.1.4.1.1271.2.1.18.1.5.3.1.4
Indicates the number of MPLS Resource Groups using this Resource Color.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cienaCesTeLinkSrlgTable 1.3.6.1.4.1.1271.2.1.18.1.5.4
This table specifies the SRLGs associated with TE links.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesTeLinkSrlgEntry

cienaCesTeLinkSrlgEntry 1.3.6.1.4.1.1271.2.1.18.1.5.4.1
An entry in this table contains information about an SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the same ifIndex is created. The ifType of ifEntry must be teLink(200). If a TE link entry in the ifTable is destroyed, then so are all of the entries in the teLinkSrlgTable that use the ifIndex of this TE link.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesTeLinkSrlgEntry  

cienaCesTeLinkSrlg 1.3.6.1.4.1.1271.2.1.18.1.5.4.1.1
This identifies an SRLG supported by the TE link. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 0..4294967295  

cienaCesTeLinkSrlgStatus 1.3.6.1.4.1.1271.2.1.18.1.5.4.1.2
This variable represents the SRLG value status. Currently we support only active(1) indicating SRLG is configured.
Status: current Access: read-only
OBJECT-TYPE    
  SRLGState  

cienaCesMplsPwTable 1.3.6.1.4.1.1271.2.1.18.1.4.1
The (conceptual) table listing the MPLS pseudo wires.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsPwEntry

cienaCesMplsPwEntry 1.3.6.1.4.1.1271.2.1.18.1.4.1.1
This represents an entry of the MPLS pseudowire table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsPwEntry  

cienaCesMplsPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1
Unique index in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwSignallingType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2
Specifies Pw signalling type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(1), dynamic(2)  

cienaCesMplsPwId 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3
This represents the unique id that is signalled in LDP
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

cienaCesMplsPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4
This represents the pseudowire name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwCustomerName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5
This represents the customer name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwAdminState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6
This represents the pseudowire administrative status
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsPwOperState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7
This represents the pseudowire operational status
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8
Peer Ip address of the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwInLabel 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9
Indicates the inbound label of the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..1048575  

cienaCesMplsPwOutLabel 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10
Indicates the outbound label of the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 -1..1048575  

cienaCesMplsPwStatusTlv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11
This represents whether the pseudowire status tlv is turned on or off
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsPwRefreshStatusIntvl 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12
This represents the refresh interval for status tlv. This is only applicable for static Pseudowire. For dynamic Pseudowire this is displayed as 0.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

cienaCesMplsPwLocalFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13
This represents the pseudowire local fault
Status: current Access: read-only
OBJECT-TYPE    
  VCStatus  

cienaCesMplsPwRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14
This represents the pseudowire remote fault
Status: current Access: read-only
OBJECT-TYPE    
  VCStatus  

cienaCesMplsPwMtu 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15
Indicates the pseudowire mtu
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1500..9128  

cienaCesMplsPwType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16
This represents the pseudowire type raw or tagged
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER raw(1), tagged(2), tdm(3)  

cienaCesMplsPwMode 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17
This represents the pseudowire mode whether it is mesh, spoke, or a MS-PW segment
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER mesh(1), spoke(2), switching(3)  

cienaCesMplsPwCoSProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18
This represents the cos profile name that is being used by pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwCoSProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19
This represents the index in cienaCesMplsPwCosProfile table
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwEgressL2PtTransform 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20
This represents the pseudowire L2PT transform for classified L2 CFT control frames
Status: current Access: read-only
OBJECT-TYPE    
  CienaGlobalState  

cienaCesMplsPwVccVProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21
This represents the vccv profile name that is being used by pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwVccVProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22
This represents the index in cienaCesMplsPwVccvProfile table
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwLocalCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23
This represents the CC/CV configured on the local pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwRemoteCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24
This represents the CC/CV configured on the remote pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwOperatingCcCv 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25
This represents the negotiated/operating CC/CV
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwBlocking 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26
Specifies whether pseudowire is blocking or forwarding
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

cienaCesMplsPwVifIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27
This represents the Vif/tunnel group that is being used for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 32769..2147483647  

cienaCesMplsPwConfigTunnelName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28
This represents the configured transport tunnel name for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwConfigTunnelType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29
This represents the configured transport tunnel type for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  TunnelType  

cienaCesMplsPwConfigTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30
Specifies the configured transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwActiveTunnelName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31
This represents the active transport tunnel name for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwActiveTunnelType 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32
This represents the active transport tunnel type for the pseudo wire. This would be the same as configured tunnel type
Status: current Access: read-only
OBJECT-TYPE    
  TunnelType  

cienaCesMplsPwActiveTunnelIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33
Specifies the active transport tunnel index in one of the cienaCesMplsTunnel/cienaCesGmplsTunnel tables for the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwRole 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34
This represents the pseudowire role whether it is a protecting or primary pseudowire
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER primary(1), secondary(2), stand-alone(3)  

cienaCesMplsPwPrimaryPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35
This represents the primary pseudowire name if this is a secondary pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwPrimaryPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36
This represents the primary pseudowire index in cienaCesMplsPw table if this is a secondary pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwVsIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37
This represents the virtual switch index in the virtual switch MIB table
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesServiceDelimiterVID 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38
This represents the service delimiter VID. This object is valid only for 39XX and 51XX platforms
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4094  

cienaCesServiceDelimiterTPID 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39
This represents the service delimiter TPID. This object is valid only for 39XX and 51XX platforms
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPwReversion 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40
This represents whether the Pseudowire Reversion is turned on or off. With the Reversion turned on, when the Primary Pseudowire has recovered from earlier failure, it will be held down for a period of cienaCesMplsPwRevertTime(sec) before the switchover from the Backup Pseudowire to Primary Pseudowire takes place. With the Reversion turned off, the user must use manual switchover command to perform a switchover back to the Primary Pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsPwRevertTime 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41
This represents the Reversion Hold-time(in seconds) on the Primary Pseudowire. When the Primary Pseudowire has recovered from earlier failure, it will be held down for the length of this hold time. Once the time has elapsed, and if the Primary Pseudowire does not encountered any more failure, there will be a switchover from the Backup Pseudowire back to the Primary Pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..3600  

cienaCesMplsPwProtectionRole 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42
This represents the role of the pseudowire in a Protection bundle.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER primary-pseudowire(1), backup-pseudowire(2), stand-alone-pseudowire(3)  

cienaCesMplsPwProtectionState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43
This represents the pseudowire protection state. It only applies to those pseudowires in the protection bundle. For stand alone pseudowire this has no meaning and is reflected as n/a in this object
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER not-applicable(1), active(2), standby(3), man-swo-active(4), man-swo-standby(5), pw-reversion-pending(6), pw-activation-pending(7)  

cienaCesMplsPwVsName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44
This represents the virtual switch name to which the pseudowire is attached.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsPwStatusQuery 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45
This represents whether the pseudowire status query is enabled. With the status query enabled, the pseudowire is able to query the remote status when it comes up and the remote status is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsMsPwPeerPwName 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46
This represents the peer pseudowire name if this is a MS-PW.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..31)  

cienaCesMplsMsPwPeerPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47
This represents the peer pseudowire index if this is a MS-PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwIdInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48
This represents the PW Id in the SP-PE TLV of the remote Status
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

cienaCesMplsLocalIpInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49
Local Ip address in the SP-PE TLV of the remote Status
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsRemoteIpInRemoteFault 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50
Remote Ip address in the SP-PE TLV of the remote Status
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51
This represents the aggregated MS-PW faults sent to the next hop
Status: current Access: read-only
OBJECT-TYPE    
  VCStatus  

cienaCesMplsPwIdInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52
This represents the PW Id in the SP-PE TLV sent to the next hop
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

cienaCesMplsLocalIpInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53
Local Ip address in the SP-PE TLV sent to the next hop
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsRemoteIpInFaultToNextHop 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54
Remote Ip address in the SP-PE TLV sent to the next hop
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwConfigBandwidth 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55
This represents the configured Bandwidth(in kbps) of pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..10000000  

cienaCesMplsPwOperBandwidth 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56
This represents the operational Bandwidth(in kbps) of pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  MplsBitRate 0..10000000  

cienaCesMplsPwBandwidthState 1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57
This represents the Bandwidth state of pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), configured(2), notRequired(3), admitted(4), acquired(5), rejected(6)  

cienaCesMplsPwCosProfileTable 1.3.6.1.4.1.1271.2.1.18.1.4.2
The (conceptual) table listing the MPLS pseudowire cos profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsPwCosProfileEntry

cienaCesMplsPwCosProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.4.2.1
This represents an entry of the MPLS pseudowire Cos profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsPwCosProfileEntry  

cienaCesMplsPwCosProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.1
Unique index for Mpls Pw Cos profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPwCosProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.2
Mpls pseudowire Cos profile name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwCosProfileFrmCosPolicy 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.3
Frame CoS policy of the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  FCosPolicy  

cienaCesMplsPwCosProfileFrmCosMapId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.4
The frame CoS map ID of pseudo wire. This value is valid if the frame Cos policy selected for the pseudowire is rcos-mapped
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwCosProfileFrmCosMapName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.5
Mpls pseudowire frame cos Map name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwCosProfileFixedTC 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.6
If the frame CoS policy for the pseudowire is fixed, this value is used for MPLS encapsulation.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsPwCosProfileRcosPolicy 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.7
Resolved CoS policy of the pseudowire
Status: current Access: read-only
OBJECT-TYPE    
  RCosPolicy  

cienaCesMplsPwCosProfileRcosMapName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.8
Mpls pseudowire resolved cos Map name. This object is valid only for 39XX and 51XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwCosProfileRCosMapId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.9
The resolved Cos map ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 39XX and 51XX platforms
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..65535  

cienaCesMplsPwCosProfileRcosProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.10
Mpls pseudowire resolved cos Profile name. This object is valid only for 87XX
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwCosProfileRCosProfileId 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.11
The resolved Cos profile ID of the pseudo wire. This value is valid if the resolved Cos policy selected for the pseudowire is rcos-mapped. This object is valid only for 87XX
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

cienaCesMplsPwCosProfileRCosFixed 1.3.6.1.4.1.1271.2.1.18.1.4.2.1.12
If the resolved CoS policy for the pseudowire is fixed, this value is used
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..7  

cienaCesMplsPwVccvProfileTable 1.3.6.1.4.1.1271.2.1.18.1.4.3
The (conceptual) table listing the MPLS pseudowire Vccv profiles.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsPwVccvProfileEntry

cienaCesMplsPwVccvProfileEntry 1.3.6.1.4.1.1271.2.1.18.1.4.3.1
This represents an entry of the MPLS pseudowire Vccv profile table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsPwVccvProfileEntry  

cienaCesMplsPwVccvProfileIndex 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.1
Unique index for Mpls Pw Vccv profile.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPwVccvProfileName 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.2
Mpls pseudowire Vccv profile name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwVccvProfileCcTtlExp 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.3
This represents the pseudowire TTL-expiry VCCV control channel (CC Type-3) operation
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsPwVccvProfileCcCienaOob 1.3.6.1.4.1.1271.2.1.18.1.4.3.1.4
This represents the pseudowire CIENA proprietary out-of-band VCCV control channel (CC Type-4) operation
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cienaCesMplsPwNotif 1.3.6.1.4.1.1271.2.1.18.1.4.4
OBJECT IDENTIFIER    

cienaCesMplsPwNotifTable 1.3.6.1.4.1.1271.2.1.18.1.4.4.1
Table of notification objects required for pseudowire notification.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsPwNotifEntry

cienaCesMplsPwNotifEntry 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1
An entry (conceptual row) in the cienaCesMplsPwNotifTable. No Get, GetNext or Set is allowed on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsPwNotifEntry  

cienaCesMplsPwNotifPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.1
Unique pseudowire index in the PW table
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesMplsPwNotifPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.2
Unique Pseudowire ID used to identify the PW in the signaling. For the static PW this represents the locally configured value.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesMplsPwNotifPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.3
This represents the locally configured PW name.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwNotifPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.4
This represents the IP address of the Peer on the remote end of the PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwNotifPriPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.5
This represents the PW Id of the primary PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesMplsPwNotifPriPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.6
This represents the PW name of the primary PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwNotifPriPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.7
This represents the IP address of the Peer on the remote end of the primary PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwNotifActPwIndex 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.8
Unique pseudowire index in the PW table
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesMplsPwNotifActPwId 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.9
This represents the PW Id of the active PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 1..4294967295  

cienaCesMplsPwNotifActPwName 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.10
This represents the PW name of the active PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

cienaCesMplsPwNotifActPwPeerIpAddr 1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.11
This represents the IP address of the Peer on the remote end of the active PW.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  IpAddress  

cienaCesMplsPwDown 1.3.6.1.4.1.1271.2.2.17.2.1
This notification is sent when the operational state of a pseudowire has changed from up to down.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesMplsPwUp 1.3.6.1.4.1.1271.2.2.17.2.2
This notification is sent when the operational state of a pseudowire has changed from down to up.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesMplsPwBundleActivePwChange 1.3.6.1.4.1.1271.2.2.17.2.3
This notification is sent when the active member of the pseudowire bundle has changed.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

cienaCesMplsPWTrafficStatsTable 1.3.6.1.4.1.1271.2.1.18.1.4.5
Mpls PW Traffic Statistics table. The attributes in this table are supported only on specific platforms.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CienaCesMplsPWTrafficStatsEntry

cienaCesMplsPWTrafficStatsEntry 1.3.6.1.4.1.1271.2.1.18.1.4.5.1
Mpls PW Traffic Statistics table entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  CienaCesMplsPWTrafficStatsEntry  

cienaCesMplsPWTrafficStatsPWIndex 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.1
Unique index for Mpls PW Traffic Statistics table.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPWTrafficStatsIncomingPackets 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.2
The number of incoming packets for the given PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPWTrafficStatsOutgoingPackets 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.3
The number of outgoing packets for the given PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPWTrafficStatsIncomingBytes 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.4
The number of incoming bytes for the given PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

cienaCesMplsPWTrafficStatsOutgoingBytes 1.3.6.1.4.1.1271.2.1.18.1.4.5.1.5
The number of outgoing bytes for the given PW.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32