CIE1000-MIRROR-MIB

File: CIE1000-MIRROR-MIB.mib (15873 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCO-IE1000-MIB CIE1000-TC

Imported symbols

NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-TYPE MODULE-IDENTITY OBJECT-TYPE
TEXTUAL-CONVENTION cie1000SwitchMgmt CIE1000InterfaceIndex
CIE1000PortList CIE1000Unsigned16 CIE1000VlanListQuarter
Integer32 TruthValue

Defined Types

CIE1000mirrorSessionType  
This enumeration defines the session type in Mirror function.
TEXTUAL-CONVENTION    
  INTEGER mirror(0), rMirrorSource(1), rMirrorDestination(2)  

CIE1000MirrorConfigSessionEntry  
SEQUENCE    
  cie1000MirrorConfigSessionSessionId Integer32
  cie1000MirrorConfigSessionMode TruthValue
  cie1000MirrorConfigSessionType CIE1000mirrorSessionType
  cie1000MirrorConfigSessionRMirrorVlan CIE1000Unsigned16
  cie1000MirrorConfigSessionReflectorPort CIE1000InterfaceIndex
  cie1000MirrorConfigSessionStripInnerTag TruthValue
  cie1000MirrorConfigSessionSourceVlans0KTo1K CIE1000VlanListQuarter
  cie1000MirrorConfigSessionSourceVlans1KTo2K CIE1000VlanListQuarter
  cie1000MirrorConfigSessionSourceVlans2KTo3K CIE1000VlanListQuarter
  cie1000MirrorConfigSessionSourceVlans3KTo4K CIE1000VlanListQuarter
  cie1000MirrorConfigSessionSourcePortListRx CIE1000PortList
  cie1000MirrorConfigSessionSourcePortListTx CIE1000PortList
  cie1000MirrorConfigSessionCpuRx TruthValue
  cie1000MirrorConfigSessionCpuTx TruthValue
  cie1000MirrorConfigSessionDestinationPortList CIE1000PortList

Defined Values

cie1000MirrorMib 1.3.6.1.4.1.9.9.832.1.15
This is a private version of Mirror
MODULE-IDENTITY    

cie1000MirrorMibObjects 1.3.6.1.4.1.9.9.832.1.15.1
OBJECT IDENTIFIER    

cie1000MirrorCapabilities 1.3.6.1.4.1.9.9.832.1.15.1.1
OBJECT IDENTIFIER    

cie1000MirrorCapabilitiesSessionCountMax 1.3.6.1.4.1.9.9.832.1.15.1.1.1
The maximum number of sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cie1000MirrorCapabilitiesSessionSourceCountMax 1.3.6.1.4.1.9.9.832.1.15.1.1.2
The maximum number of Mirror and RMirror source sessions.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

cie1000MirrorCapabilitiesRMirrorSuport 1.3.6.1.4.1.9.9.832.1.15.1.1.3
Indicate if RMirror feature is supported or not. true means supported. false means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cie1000MirrorCapabilitiesInternalReflectorPortSupport 1.3.6.1.4.1.9.9.832.1.15.1.1.4
Indicate if Internal reflector port is supported or not. true means supported. false means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cie1000MirrorCapabilitiesCpuMirrorSupport 1.3.6.1.4.1.9.9.832.1.15.1.1.5
Indicate if mirroring CPU traffic is supported or not. true means supported. false means not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cie1000MirrorConfig 1.3.6.1.4.1.9.9.832.1.15.1.2
OBJECT IDENTIFIER    

cie1000MirrorConfigSessionTable 1.3.6.1.4.1.9.9.832.1.15.1.2.1
This is a table of configuration per session
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CIE1000MirrorConfigSessionEntry

cie1000MirrorConfigSessionEntry 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1
Each session has a set of parameters
Status: current Access: not-accessible
OBJECT-TYPE    
  CIE1000MirrorConfigSessionEntry  

cie1000MirrorConfigSessionSessionId 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.1
Session ID. Valid range is (1..maximum). The maximum is platform-specific and can be retrieved from the Mirror capabilities.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Integer32 1..65535  

cie1000MirrorConfigSessionMode 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.2
Controls whether this session is enabled or disabled. true is to enable the function. false is to disable it. Multiple criteria must be fulfilled in order to be able to enable a session.The criteria depend on the 'SessionType'.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cie1000MirrorConfigSessionType 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.3
Session type in Mirror. 'mirror' means to do the Mirror function on the device. 'rMirrorSource' means the device acts as source node for monitor flow. 'rMirrorDestination' means the device acts as end node for monitor flow.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000mirrorSessionType  

cie1000MirrorConfigSessionRMirrorVlan 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4
The VLAN ID points out where the monitor packet will copy to. The remote Mirror VLAN ID. Only used for RMirror types. RMirror source session: The mirrored traffic is copied onto this VLAN ID. Traffic will flood to all ports that are members of the remote Mirror VLAN ID. RMirror destination session: The #destination_port_list contains the port(s) that the Mirror VLAN will be copied to in addition to ports that are already configured (through the VLAN module) to be members of this VLAN.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000Unsigned16  

cie1000MirrorConfigSessionReflectorPort 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5
A reflector port is a port that the administrator may have to specify in case the device does not have internal (unused) ports available. Whether this is the case or not for this device can be derived from Mirror capabilities. When 'ReflectorPort' is used, it must be specified when an RMirror source session is enabled. In this case, the reflector port will be shut down for normal front port usage, because the switch needs a port where it can loop frames in order to get mirrored traffic copied onto a particular VLAN ID (the 'RMirrorVlan').
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000InterfaceIndex  

cie1000MirrorConfigSessionStripInnerTag 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.6
This configuration is used to strip the original VLAN ID of the mirrored traffic or not. When it is set to TRUE, the the original VLAN ID of the mirrored traffic will be stripped, otherwise the original VLAN ID will be carried to destination interface. It may have to specify in case the device does not have internal (unused) ports available. Whether this is the case or not for this device can be derived from Mirror capabilities.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cie1000MirrorConfigSessionSourceVlans0KTo1K 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.7
First quarter of bit-array indicating source VLAN list. All traffic in the VLANs specified in this list will get mirrored onto either the destination port (Mirror session) or the destination VLAN (RMirror source session). It's a bit-mask that indicates the VLANs. A '1' indicates the VLAN ID is selected, a '0' indicates that the VLAN ID isn't selected.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000VlanListQuarter  

cie1000MirrorConfigSessionSourceVlans1KTo2K 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.8
Second quarter of bit-array indicating source VLAN list. All traffic in the VLANs specified in this list will get mirrored onto either the destination port (Mirror session) or the destination VLAN (RMirror source session). It's a bit-mask that indicates the VLANs. A '1' indicates the VLAN ID is selected, a '0' indicates that the VLAN ID isn't selected.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000VlanListQuarter  

cie1000MirrorConfigSessionSourceVlans2KTo3K 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.9
Third quarter of bit-array indicating source VLAN list. All traffic in the VLANs specified in this list will get mirrored onto either the destination port (Mirror session) or the destination VLAN (RMirror source session). It's a bit-mask that indicates the VLANs. A '1' indicates the VLAN ID is selected, a '0' indicates that the VLAN ID isn't selected.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000VlanListQuarter  

cie1000MirrorConfigSessionSourceVlans3KTo4K 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.10
Fourth quarter of bit-array indicating source VLAN list. All traffic in the VLANs specified in this list will get mirrored onto either the destination port (Mirror session) or the destination VLAN (RMirror source session). It's a bit-mask that indicates the VLANs. A '1' indicates the VLAN ID is selected, a '0' indicates that the VLAN ID isn't selected.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000VlanListQuarter  

cie1000MirrorConfigSessionSourcePortListRx 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.11
A bit-mask that controls whether a given port is enabled for mirroring of incoming traffic. A '1' indicates that the port is included, whereas a '0' indicates it isn't. Only source sessions (Mirror and RMirror Source) use this value.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000PortList  

cie1000MirrorConfigSessionSourcePortListTx 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.12
A bit-mask that controls whether a given port is enabled for mirroring of outgoing traffic. A '1' indicates that the port is included, whereas a '0' indicates it isn't. Only source sessions (Mirror and RMirror Source) use this value.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000PortList  

cie1000MirrorConfigSessionCpuRx 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.13
Controls whether mirroring of traffic received by the internal CPU is enabled or disabled. It is supported or not can be derived from Mirror capabilities.Only source sessions (Mirror and RMirror Source) use this value.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cie1000MirrorConfigSessionCpuTx 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.14
Controls whether mirroring of traffic transmitted by the internal CPU is enabled or disabled. It is supported or not can be derived from Mirror capabilities.Only source sessions (Mirror and RMirror Source) use this value.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cie1000MirrorConfigSessionDestinationPortList 1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.15
Destination port list implemented as a bit-mask, where a '1' indicates that the port is included and a '0' indicates that it isn't. Only used in plain Mirror sessions and RMirror destination sessions. Mirror session: At most one bit may be set in this mask. RMirror destination session: Zero or more bits may be set in this mask.
Status: current Access: read-write
OBJECT-TYPE    
  CIE1000PortList  

cie1000MirrorMibConformance 1.3.6.1.4.1.9.9.832.1.15.2
OBJECT IDENTIFIER    

cie1000MirrorMibCompliances 1.3.6.1.4.1.9.9.832.1.15.2.1
OBJECT IDENTIFIER    

cie1000MirrorMibGroups 1.3.6.1.4.1.9.9.832.1.15.2.2
OBJECT IDENTIFIER    

cie1000MirrorCapabilitiesInfoGroup 1.3.6.1.4.1.9.9.832.1.15.2.2.1
A collection of objects.
Status: current Access: read-write
OBJECT-GROUP    

cie1000MirrorConfigSessionTableInfoGroup 1.3.6.1.4.1.9.9.832.1.15.2.2.2
A collection of objects.
Status: current Access: read-write
OBJECT-GROUP    

cie1000MirrorMibCompliance 1.3.6.1.4.1.9.9.832.1.15.2.1.1
The compliance statement for the implementation.
Status: current Access: read-write
MODULE-COMPLIANCE