CIE1000-ICFG-MIB

File: CIE1000-ICFG-MIB.mib (12826 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
CISCO-IE1000-MIB CIE1000-TC

Imported symbols

NOTIFICATION-GROUP MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-TYPE MODULE-IDENTITY OBJECT-TYPE
TEXTUAL-CONVENTION cie1000SwitchMgmt CIE1000DisplayString
Integer32 Unsigned32 TruthValue

Defined Types

CIE1000IcfgConfigStatus  
TEXTUAL-CONVENTION    
  current INTEGER none(0), success(1), inProgress(2), errOtherInProcessing(3), errNoSuchFile(4), errSameSrcDst(5), errPermissionDenied(6), errLoadSrc(7), errSaveDst(8)

CIE1000IcfgConfigType  
TEXTUAL-CONVENTION    
  current INTEGER none(0), runningConfig(1), startupConfig(2), configFile(3)

CIE1000IcfgReloadDefault  
TEXTUAL-CONVENTION    
  current INTEGER none(0), default(1), defaultKeepIp(2)

CIE1000IcfgStatusFileEntry  
SEQUENCE    
  cie1000IcfgStatusFileFileNo Integer32
  cie1000IcfgStatusFileFileName CIE1000DisplayString
  cie1000IcfgStatusFileBytes Unsigned32
  cie1000IcfgStatusFileModifiedTime CIE1000DisplayString
  cie1000IcfgStatusFileAttribute CIE1000DisplayString

Defined Values

cie1000IcfgMib 1.3.6.1.4.1.9.9.832.1.101
This is a private version of ICFG
MODULE-IDENTITY    

cie1000IcfgMibObjects 1.3.6.1.4.1.9.9.832.1.101.1
OBJECT IDENTIFIER    

cie1000IcfgStatus 1.3.6.1.4.1.9.9.832.1.101.1.3
OBJECT IDENTIFIER    

cie1000IcfgStatusFileStatistics 1.3.6.1.4.1.9.9.832.1.101.1.3.1
OBJECT IDENTIFIER    

cie1000IcfgStatusFileStatisticsNumberOfFiles 1.3.6.1.4.1.9.9.832.1.101.1.3.1.1
Number of files in flash.
OBJECT-TYPE    
  Unsigned32  

cie1000IcfgStatusFileStatisticsTotalBytes 1.3.6.1.4.1.9.9.832.1.101.1.3.1.2
Total number of bytes used by all files in flash.
OBJECT-TYPE    
  Unsigned32  

cie1000IcfgStatusFileStatisticsFlashSizeBytes 1.3.6.1.4.1.9.9.832.1.101.1.3.1.3
Flash file system size in bytes.
OBJECT-TYPE    
  Unsigned32  

cie1000IcfgStatusFileStatisticsFlashFreeBytes 1.3.6.1.4.1.9.9.832.1.101.1.3.1.4
Flash file system number of free bytes.
OBJECT-TYPE    
  Unsigned32  

cie1000IcfgStatusFileTable 1.3.6.1.4.1.9.9.832.1.101.1.3.2
This is a table of status of files in flash.
OBJECT-TYPE    
  SEQUENCE OF  
    CIE1000IcfgStatusFileEntry

cie1000IcfgStatusFileEntry 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1
Each entry has a set of file status.
OBJECT-TYPE    
  CIE1000IcfgStatusFileEntry  

cie1000IcfgStatusFileFileNo 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.1
The number of File. The number starts from 1.
OBJECT-TYPE    
  Integer32 0..2147483647  

cie1000IcfgStatusFileFileName 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.2
File name.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..127)  

cie1000IcfgStatusFileBytes 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.3
Number of bytes of the file.
OBJECT-TYPE    
  Unsigned32  

cie1000IcfgStatusFileModifiedTime 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.4
Last modified time of the file.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..39)  

cie1000IcfgStatusFileAttribute 1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.5
File attribute in the format of 'rw'. 'r' presents readable while 'w' presents writable.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..15)  

cie1000IcfgStatusCopyConfig 1.3.6.1.4.1.9.9.832.1.101.1.3.3
OBJECT IDENTIFIER    

cie1000IcfgStatusCopyConfigStatus 1.3.6.1.4.1.9.9.832.1.101.1.3.3.1
The status indicates the status of current copy operation. none(0) means no copy operation. success(1) means copy operation is successful. inProgress(2) means current copy operation is in progress. errOtherInProcessing(3) means copy operation is failed due to other in processing. errNoSuchFile(4) means copy operation is failed due to file not existing. errSameSrcDst(5) means copy operation is failed due to the source and destination are the same. errPermissionDenied(6) means copy operation is failed due to the destination is not permitted to modify. errLoadSrc(7) means copy operation is failed due to the error to load source file. errSaveDst(8) means copy operation is failed due to the error to save or commit destination.
OBJECT-TYPE    
  CIE1000IcfgConfigStatus  

cie1000IcfgControl 1.3.6.1.4.1.9.9.832.1.101.1.4
OBJECT IDENTIFIER    

cie1000IcfgControlGlobals 1.3.6.1.4.1.9.9.832.1.101.1.4.1
OBJECT IDENTIFIER    

cie1000IcfgControlGlobalsReloadDefault 1.3.6.1.4.1.9.9.832.1.101.1.4.1.1
Reset system to default. none(0) is to do nothing. default(1) is to reset the whole system to default. defaultKeepIp(2) is to reset system to default, but keep IP address of VLAN 1.
OBJECT-TYPE    
  CIE1000IcfgReloadDefault  

cie1000IcfgControlGlobalsDeleteFile 1.3.6.1.4.1.9.9.832.1.101.1.4.1.2
Delete file in flash. The format is flash:filename. Where 'default-config' is read-only and not allowed to be deleted.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..127)  

cie1000IcfgControlCopyConfig 1.3.6.1.4.1.9.9.832.1.101.1.4.2
OBJECT IDENTIFIER    

cie1000IcfgControlCopyConfigCopy 1.3.6.1.4.1.9.9.832.1.101.1.4.2.1
Action to do copy or not. true is to do the copy operation. false is to do nothing
OBJECT-TYPE    
  TruthValue  

cie1000IcfgControlCopyConfigSourceConfigType 1.3.6.1.4.1.9.9.832.1.101.1.4.2.2
Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in SourceConfigFile.
OBJECT-TYPE    
  CIE1000IcfgConfigType  

cie1000IcfgControlCopyConfigSourceConfigFile 1.3.6.1.4.1.9.9.832.1.101.1.4.2.3
Source configuration file. If the configuration file is in flash then the format is flash:'filename'. If the configuration file is from tftp then the format is tftp://server[:port]/path-to-file.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..127)  

cie1000IcfgControlCopyConfigDestinationConfigType 1.3.6.1.4.1.9.9.832.1.101.1.4.2.4
Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in DestinationConfigFile.
OBJECT-TYPE    
  CIE1000IcfgConfigType  

cie1000IcfgControlCopyConfigDestinationConfigFile 1.3.6.1.4.1.9.9.832.1.101.1.4.2.5
Destination configuration file. If the configuration file is in flash then the format is flash:filename. If the configuration file is from tftp then the format is tftp://server[:port]/filename_with_path. Where 'default-config' is read-only and not allowed to be deleted.
OBJECT-TYPE    
  CIE1000DisplayString Size(0..127)  

cie1000IcfgControlCopyConfigMerge 1.3.6.1.4.1.9.9.832.1.101.1.4.2.6
This flag works only if DestinationConfigType is runningConfig(1). true is to merge the source configuration into the current running configuration. false is to replace the current running configuration with the source configuration.
OBJECT-TYPE    
  TruthValue  

cie1000IcfgMibConformance 1.3.6.1.4.1.9.9.832.1.101.2
OBJECT IDENTIFIER    

cie1000IcfgMibCompliances 1.3.6.1.4.1.9.9.832.1.101.2.1
OBJECT IDENTIFIER    

cie1000IcfgMibGroups 1.3.6.1.4.1.9.9.832.1.101.2.2
OBJECT IDENTIFIER    

cie1000IcfgStatusFileStatisticsInfoGroup 1.3.6.1.4.1.9.9.832.1.101.2.2.1
A collection of objects.
OBJECT-GROUP    

cie1000IcfgStatusFileTableInfoGroup 1.3.6.1.4.1.9.9.832.1.101.2.2.2
A collection of objects.
OBJECT-GROUP    

cie1000IcfgStatusCopyConfigInfoGroup 1.3.6.1.4.1.9.9.832.1.101.2.2.3
A collection of objects.
OBJECT-GROUP    

cie1000IcfgControlGlobalsInfoGroup 1.3.6.1.4.1.9.9.832.1.101.2.2.4
A collection of objects.
OBJECT-GROUP    

cie1000IcfgControlCopyConfigInfoGroup 1.3.6.1.4.1.9.9.832.1.101.2.2.5
A collection of objects.
OBJECT-GROUP    

cie1000IcfgMibCompliance 1.3.6.1.4.1.9.9.832.1.101.2.1.1
The compliance statement for the implementation.
MODULE-COMPLIANCE