CERENT-MSDWDM-MIB

File: CERENT-MSDWDM-MIB.mib (120612 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB CERENT-GLOBAL-REGISTRY CERENT-TC

Imported symbols

Integer32 Counter32 Unsigned32
Counter64 MODULE-IDENTITY OBJECT-TYPE
TEXTUAL-CONVENTION TruthValue MODULE-COMPLIANCE
OBJECT-GROUP ifIndex cerentModules
cerentRequirements cerentGeneric CerentPeriod

Defined Types

ProtocolType  
An integer value that identifies the protocol used across an interface.
TEXTUAL-CONVENTION    
  INTEGER other(1), unknown(2), tenGigEth(4), fibreChOrOneGigEth(5), unframed(7), sonet(8), sdh(9), sysplexIscCompatibility(10), sysplexIscPeer(11), sysplexTimerEtr(12), sysplexTimerClo(13), fastEthernet(14), fddi(15), eightGfc(16), oc768(17), otn(18)  

IntervalType  
This value indicates the time period over which performance monitoring data has been collected. Valid values are - fifteenMin (1) : values for the 15 min interval. oneDay (2) : values for the 1 Day interval.
TEXTUAL-CONVENTION    
  INTEGER fifteenMin(1), oneDay(2)  

LocationAndIntervalType  
This value indicates the time period and the location for which the performace monitoring data has been collected. Valid values are - nearEnd15Min (1) : nearEnd values for the 15 min interval. nearEndOneDay (2) : nearEnd values for the 1 Day interval. farEnd15Min (3) : farEnd values for the 15 min interval. farEndOneDay (4) : farEnd values for the 1 day interval.
TEXTUAL-CONVENTION    
  INTEGER nearEnd15Min(1), nearEndOneDay(2), farEnd15Min(3), farEndOneDay(4)  

MonitorType  
This value indicates the type of performance statistics being monitored. Valid values are - path(1) : Performance statistics for path parameters. section(2) : Performance statistics for section parameters. tcm1(3) : Performance statistics for tandem connection monitoring 1. tcm2(4) : Performance statistics for tandem connection monitoring 2.
TEXTUAL-CONVENTION    
  INTEGER path(1), section(2), tcm1(3), tcm2(4)  

RingDirection  
This value indicates the type of directionality in the ring. The directionality is meaning the facing side of the port that is connected to fiber. Valid values are - westEast(1) : the port is facing to west side, continuing to east side eastWest(2) : the port is facing to east side, continuing to west side
TEXTUAL-CONVENTION    
  INTEGER westEast(1), eastWest(2)  

SideIdentifier  
This value indicates the side in the ring/mesh node e.g. the facing side associated to on optical interface within an up to 8 deg mesh node. Valid values are - unknownSide(0) sideA(1) sideB(2) sideC(3) sideD(4) sideE(5) sideF(6) sideG(7) sideH(8) sideI(9) sideJ(10) sideK(11) sideL(12) sideM(13) sideN(14) sideO(15) sideP(16) sideQ(17) sideR(18) sideS(19) sideT(20)
TEXTUAL-CONVENTION    
  INTEGER unknownSide(0), sideA(1), sideB(2), sideC(3), sideD(4), sideE(5), sideF(6), sideG(7), sideH(8), sideI(9), sideJ(10), sideK(11), sideL(12), sideM(13), sideN(14), sideO(15), sideP(16), sideQ(17), sideR(18), sideS(19), sideT(20)  

OpticalPortRule  
This value indicates the rule that assumes the optical port. Valid values are - inputLine(1) : this is an input LINE port outputLine(2) : this is an output LINE port inputCom(3) : this is an input COM port outputCom(4) : this is an output COM port inputOsc(5) : this is an input OSC port outputOsc(6) : this is an output OSC port inputDc(7) : this is an input DCU port outputDc(8) : this is an output DCU port inputExpress(9) : this is an input EXPress port outputExpress(10) : this is an output EXPress port add(11) : this is an band/wavelength ADD port drop(12) : this is an band/wavelength DROP port inputPassThru(13) : this is an input Pass Thru port inputWorking(14) : the working port that receive the signal in an optical protection unit outputWorking(15) : the working port that send the signal in an optical protection unit inputProtected(16) : the protected port that receive the signal in an optical protection unit outputProtected(17) : the protected port that send the signal in an optical protection unit inputRaman(18) : this is an input RAMAN port outputRaman(19) : this is an output RAMAN port com(20) : this is an COM port ead(21) : this is an Express/Add/Drop port ad(22) : this is an Add/Drop port
TEXTUAL-CONVENTION    
  INTEGER inputLine(1), outputLine(2), inputCom(3), outputCom(4), inputOsc(5), outputOsc(6), inputDc(7), outputDc(8), inputExpress(9), outputExpress(10), add(11), drop(12), inputPassThru(13), inputWorking(14), outputWorking(15), inputProtected(16), outputProtected(17), inputRaman(18), outputRaman(19), com(20), ead(21), ad(22)  

LaserStatus  
This value indicates the working status of the laser. Valid values are - on(1) : laser is working off(2) : laser is switched off apr(3) : laser is working in automatic power reduction none(4) : laser is not present
TEXTUAL-CONVENTION    
  INTEGER on(1), off(2), apr(3), none(4)  

OpticalAmplifierMode  
This value indicates the amplifier working mode Valid values are - gain(1) : gain control mode power(2) : power control mode none(3) : not an amplifier port fixed-gain(4) : fixed gain control mode
TEXTUAL-CONVENTION    
  INTEGER gain(1), power(2), none(3), fixed-gain(4)  

OpticalBand  
This value indicates the the wavelength group (band) The following wave lengths group are supported: bn1530d33To1532d68 : are the wavelengths from 1530.33 nm to 1532.68 nm. bn1534d25To1536d61 : are the wavelengths from 1534.25 nm to 1536.61 nm. bn1538d19To1540d56 : are the wavelengths from 1538.19 nm to 1540.56 nm. bn1542d14To1544d53 : are the wavelengths from 1542.14 nm to 1544.53 nm. bn1546d12To1548d51 : are the wavelengths from 1546.12 nm to 1548.51 nm. bn1550d12To1552d52 : are the wavelengths from 1550.12 nm to 1552.52 nm. bn1554d13To1556d55 : are the wavelengths from 1554.13 nm to 1556.55 nm. bn1558d17To1560d61 : are the wavelengths from 1558.17 nm to 1560.61 nm.
TEXTUAL-CONVENTION    
  INTEGER unknown(1), bn1530d33To1532d68(5), bn1534d25To1536d61(25), bn1538d19To1540d56(45), bn1542d14To1544d53(65), bn1546d12To1548d51(85), bn1550d12To1552d52(105), bn1554d13To1556d55(125), bn1558d17To1560d61(145)  

OpticalWavelength  
This object allows the management client to configure the wavelength mode of operation to the applicable interfaces. The following wave lengths are supported: wv1529d55 is 1529.55 nm wv1529d94 is 1529.94 nm wv1530d33 is 1530.33 nm wv1530d72 is 1530.72 nm wv1531d12 is 1531.12 nm wv1531d51 is 1531.51 nm wv1531d90 is 1531.90 nm wv1532d29 is 1532.29 nm wv1532d68 is 1532.68 nm wv1533d07 is 1533.07 nm wv1533d47 is 1533.47 nm wv1533d86 is 1533.86 nm wv1534d25 is 1534.25 nm wv1534d64 is 1534.64 nm wv1535d04 is 1535.04 nm wv1535d43 is 1535.43 nm wv1535d82 is 1535.82 nm wv1536d22 is 1536.22 nm wv1536d61 is 1536.61 nm wv1537d00 is 1537.00 nm wv1537d40 is 1537.40 nm wv1537d79 is 1537.79 nm wv1538d19 is 1538.19 nm wv1538d58 is 1538.58 nm wv1538d98 is 1538.98 nm wv1539d37 is 1539.37 nm wv1539d77 is 1539.77 nm wv1540d16 is 1540.16 nm wv1540d56 is 1540.56 nm wv1540d95 is 1540.95 nm wv1541d35 is 1541.35 nm wv1541d75 is 1541.75 nm wv1542d14 is 1542.14 nm wv1542d54 is 1542.54 nm wv1542d94 is 1542.94 nm wv1543d33 is 1543.33 nm wv1543d73 is 1543.73 nm wv1544d13 is 1544.13 nm wv1544d53 is 1544.53 nm wv1544d92 is 1544.92 nm wv1545d32 is 1545.32 nm wv1545d72 is 1545.72 nm wv1546d12 is 1546.12 nm wv1546d52 is 1546.52 nm wv1546d92 is 1546.92 nm wv1547d32 is 1547.32 nm wv1547d72 is 1547.72 nm wv1548d11 is 1548.11 nm wv1548d51 is 1548.51 nm wv1548d91 is 1548.91 nm wv1549d32 is 1549.32 nm wv1549d72 is 1549.72 nm wv1550d12 is 1550.12 nm wv1550d52 is 1550.52 nm wv1550d92 is 1550.92 nm wv1551d32 is 1551.32 nm wv1551d72 is 1551.72 nm wv1552d12 is 1552.12 nm wv1552d52 is 1552.52 nm wv1552d93 is 1552.93 nm wv1553d33 is 1553.33 nm wv1553d73 is 1553.73 nm wv1554d13 is 1554.13 nm wv1554d54 is 1554.54 nm wv1554d94 is 1554.94 nm wv1555d34 is 1555.34 nm wv1555d75 is 1555.75 nm wv1556d15 is 1556.15 nm wv1556d55 is 1556.55 nm wv1556d96 is 1556.96 nm wv1557d36 is 1557.36 nm wv1557d77 is 1557.77 nm wv1558d17 is 1558.17 nm wv1558d58 is 1558.58 nm wv1558d98 is 1558.98 nm wv1559d39 is 1559.39 nm wv1559d79 is 1559.79 nm wv1560d20 is 1560.20 nm wv1560d61 is 1560.61 nm wv1561d01 is 1561.01 nm wv1561d42 is 1561.42 nm wv1561d83 is 1561.83 nm -- L Band wv1570d83 is 1570.83 nm wv1571d24 is 1571.24 nm wv1571d65 is 1571.65 nm wv1572d06 is 1572.06 nm wv1572d48 is 1572.48 nm wv1572d89 is 1572.89 nm wv1573d30 is 1573.30 nm wv1573d71 is 1573.71 nm wv1574d13 is 1574.13 nm wv1574d54 is 1574.54 nm wv1574d95 is 1574.95 nm wv1575d37 is 1575.37 nm wv1575d78 is 1575.78 nm wv1576d20 is 1576.20 nm wv1576d61 is 1576.61 nm wv1577d03 is 1577.03 nm wv1577d44 is 1577.44 nm wv1577d86 is 1577.86 nm wv1578d27 is 1578.27 nm wv1578d69 is 1578.69 nm wv1579d10 is 1579.10 nm wv1579d52 is 1579.52 nm wv1579d93 is 1579.93 nm wv1580d35 is 1580.35 nm wv1580d77 is 1580.77 nm wv1581d18 is 1581.18 nm wv1581d60 is 1581.60 nm wv1582d02 is 1582.02 nm wv1582d44 is 1582.44 nm wv1582d85 is 1582.85 nm wv1583d27 is 1583.27 nm wv1583d69 is 1583.69 nm wv1584d11 is 1584.11 nm wv1584d53 is 1584.53 nm wv1584d95 is 1584.95 nm wv1585d36 is 1585.36 nm wv1585d78 is 1585.78 nm wv1586d20 is 1586.20 nm wv1586d62 is 1586.62 nm wv1587d04 is 1587.04 nm wv1587d46 is 1587.46 nm wv1587d88 is 1587.88 nm wv1588d30 is 1588.30 nm wv1588d73 is 1588.73 nm wv1589d15 is 1589.15 nm wv1589d57 is 1589.57 nm wv1589d99 is 1589.99 nm wv1590d41 is 1590.41 nm wv1590d83 is 1590.83 nm wv1591d26 is 1591.26 nm wv1591d68 is 1591.68 nm wv1592d10 is 1592.10 nm wv1592d52 is 1592.52 nm wv1592d95 is 1592.95 nm wv1593d37 is 1593.37 nm wv1593d79 is 1593.79 nm wv1594d22 is 1594.22 nm wv1594d64 is 1594.64 nm wv1595d06 is 1595.06 nm wv1595d49 is 1595.49 nm wv1595d91 is 1595.91 nm wv1596d34 is 1596.34 nm wv1596d76 is 1596.76 nm wv1597d19 is 1597.19 nm wv1597d62 is 1597.62 nm wv1598d04 is 1598.04 nm wv1598d47 is 1598.47 nm wv1598d89 is 1598.89 nm wv1599d32 is 1599.32 nm wv1599d75 is 1599.75 nm wv1600d17 is 1600.17 nm wv1600d60 is 1600.60 nm wv1601d03 is 1601.03 nm wv1601d46 is 1601.46 nm wv1601d88 is 1601.88 nm wv1602d31 is 1602.31 nm wv1602d74 is 1602.74 nm wv1603d17 is 1603.17 nm wv1603d60 is 1603.60 nm wv1604d03 is 1604.03 nm
TEXTUAL-CONVENTION    
  INTEGER unknown(1), wv1529d55(3), wv1529d94(4), wv1530d33(5), wv1530d72(7), wv1531d12(10), wv1531d51(12), wv1531d90(15), wv1532d29(17), wv1532d68(20), wv1533d07(22), wv1533d47(23), wv1533d86(24), wv1534d25(25), wv1534d64(27), wv1535d04(30), wv1535d43(32), wv1535d82(35), wv1536d22(37), wv1536d61(40), wv1537d00(42), wv1537d40(43), wv1537d79(44), wv1538d19(45), wv1538d58(47), wv1538d98(50), wv1539d37(52), wv1539d77(55), wv1540d16(57), wv1540d56(60), wv1540d95(62), wv1541d35(63), wv1541d75(64), wv1542d14(65), wv1470(66), wv1542d54(67), wv1510(68), wv1590(69), wv1542d94(70), wv850(71), wv1543d33(72), wv1310(73), wv1550(74), wv1543d73(75), wv1490(76), wv1544d13(77), wv1530(78), wv1570(79), wv1544d53(80), wv1610(81), wv1544d92(82), wv1545d32(83), wv1545d72(84), wv1546d12(85), wv1546d52(87), wv1546d92(90), wv1547d32(92), wv1547d72(95), wv1548d11(97), wv1548d51(100), wv1548d91(102), wv1549d32(103), wv1549d72(104), wv1550d12(105), wv1550d52(107), wv1550d92(110), wv1551d32(112), wv1551d72(115), wv1552d12(117), wv1552d52(120), wv1552d93(122), wv1553d33(123), wv1553d73(124), wv1554d13(125), wv1554d54(127), wv1554d94(130), wv1555d34(132), wv1555d75(135), wv1556d15(137), wv1556d55(140), wv1556d96(142), wv1557d36(143), wv1557d77(144), wv1558d17(145), wv1558d58(147), wv1558d98(150), wv1559d39(152), wv1559d79(155), wv1560d20(157), wv1560d61(160), wv1561d01(162), wv1561d42(164), wv1561d83(166), wv1570d83(168), wv1571d24(170), wv1571d65(172), wv1572d06(174), wv1572d48(176), wv1572d89(178), wv1573d30(180), wv1573d71(182), wv1574d13(184), wv1574d54(186), wv1574d95(188), wv1575d37(190), wv1575d78(192), wv1576d20(194), wv1576d61(196), wv1577d03(198), wv1577d44(200), wv1577d86(205), wv1578d27(210), wv1578d69(215), wv1579d10(220), wv1579d52(225), wv1579d93(230), wv1580d35(235), wv1580d77(240), wv1581d18(245), wv1581d60(250), wv1582d02(255), wv1582d44(260), wv1582d85(265), wv1583d27(270), wv1583d69(275), wv1584d11(280), wv1584d53(285), wv1584d95(290), wv1585d36(295), wv1585d78(300), wv1586d20(305), wv1586d62(310), wv1587d04(315), wv1587d46(320), wv1587d88(325), wv1588d30(330), wv1588d73(335), wv1589d15(340), wv1589d57(345), wv1589d99(350), wv1590d41(355), wv1590d83(360), wv1591d26(365), wv1591d68(370), wv1592d10(375), wv1592d52(380), wv1592d95(385), wv1593d37(390), wv1593d79(395), wv1594d22(400), wv1594d64(405), wv1595d06(410), wv1595d49(415), wv1595d91(420), wv1596d34(425), wv1596d76(430), wv1597d19(435), wv1597d62(440), wv1598d04(445), wv1598d47(450), wv1598d89(455), wv1599d32(460), wv1599d75(465), wv1600d17(470), wv1600d60(475), wv1601d03(480), wv1601d46(485), wv1601d88(490), wv1602d31(500), wv1602d74(505), wv1603d17(510), wv1603d60(515), wv1604d03(520), firsttunablewv(530), wv1528d77(540)  

OpticalPowerInDbm  
An integer value that gives the optical power level in 1/10ths of dBm. Example: The value -300 represents a power level of -30.0 dBm. The distinguished value of '-1000' indicates that the object has not yet been initialized.
TEXTUAL-CONVENTION    
  Integer32 -400..250 | -1000  

OpticalAttenInDb  
An integer value that gives the attenuation level in 1/10ths of dB. Example: The value 80 represents an attenuation level of 8.0 dB.
TEXTUAL-CONVENTION    
  Integer32 0..400  

TDCUCompensation  
Enumeration of the possible fine TDCU compensation values 0 ps/nm -45 ps/nm -90 ps/nm -135 ps/nm -180 ps/nm -225 ps/nm -270 ps/nm -315 ps/nm -360 ps/nm -405 ps/nm -450 ps/nm -495 ps/nm -540 ps/nm -585 ps/nm -630 ps/nm -675 ps/nm Enumeration of the possible coarse TDCU compensation values 0 ps/nm -110 ps/nm -220 ps/nm -330 ps/nm -440 ps/nm -550 ps/nm -660 ps/nm -770 ps/nm -880 ps/nm -990 ps/nm -1100 ps/nm -1210 ps/nm -1320 ps/nm -1430 ps/nm -1540 ps/nm -1650 ps/nm
TEXTUAL-CONVENTION    
  INTEGER psnmNotApplicable(-1), psnm0(0), psnmFineMinus45(1), psnmFineMinus90(2), psnmFineMinus135(3), psnmFineMinus180(4), psnmFineMinus225(5), psnmFineMinus270(6), psnmFineMinus315(7), psnmFineMinus360(8), psnmFineMinus405(9), psnmFineMinus450(10), psnmFineMinus495(11), psnmFineMinus540(12), psnmFineMinus585(13), psnmFineMinus630(14), psnmFineMinus675(15), psnmCoarseMinus110(16), psnmCoarseMinus220(17), psnmCoarseMinus330(18), psnmCoarseMinus440(19), psnmCoarseMinus550(20), psnmCoarseMinus660(21), psnmCoarseMinus770(22), psnmCoarseMinus880(23), psnmCoarseMinus990(24), psnmCoarseMinus1100(25), psnmCoarseMinus1210(26), psnmCoarseMinus1320(27), psnmCoarseMinus1430(28), psnmCoarseMinus1540(29), psnmCoarseMinus1650(30)  

CMsDwdmIfConfigEntry  
SEQUENCE    
  cMsDwdmIfConfigProtocol ProtocolType
  cMsDwdmIfConfigDataRate INTEGER
  cMsDwdmIfConfigLoopback INTEGER
  cMsDwdmIfConfigWavelength OpticalWavelength
  cMsDwdmIfConfigOtnStatus TruthValue
  cMsDwdmIfConfigFECStatus TruthValue
  cMsDwdmIfOpticsValidIntervals Unsigned32
  cMsDwdmIfOTNValidIntervals Unsigned32
  cMsDwdmIfFECValidIntervals Unsigned32
  cMsDwdmIfConfigFECMode INTEGER

CMsDwdmIfTransportEntry  
SEQUENCE    
  cMsDwdmIfTransportRingDirection RingDirection
  cMsDwdmIfTransportPortRule OpticalPortRule
  cMsDwdmIfTransportPower OpticalPowerInDbm
  cMsDwdmIfTransportAddPower OpticalPowerInDbm
  cMsDwdmIfTransportOSCPower OpticalPowerInDbm
  cMsDwdmIfTransportReferencePower OpticalPowerInDbm
  cMsDwdmIfTransportCalibratedPower OpticalPowerInDbm
  cMsDwdmIfTransportInsertionLoss OpticalAttenInDb
  cMsDwdmIfTransportLaserStatus LaserStatus
  cMsDwdmIfTransportAmplifierMode OpticalAmplifierMode
  cMsDwdmIfTransportGain OpticalAttenInDb
  cMsDwdmIfTransportExpectedGain OpticalAttenInDb
  cMsDwdmIfTransportReferenceTilt OpticalAttenInDb
  cMsDwdmIfTransportCalibratedTilt OpticalAttenInDb
  cMsDwdmIfTransportDCULoss OpticalAttenInDb
  cMsDwdmIfTransportOSRI INTEGER
  cMsDwdmIfTransportSideIdentifier SideIdentifier
  cMsDwdmIfTransportTDCUCompensation TDCUCompensation

CMsDwdmIfMultiplexSectionEntry  
SEQUENCE    
  cMsDwdmIfMultiplexSectionRingDirection RingDirection
  cMsDwdmIfMultiplexSectionPortRule OpticalPortRule
  cMsDwdmIfMultiplexSectionPower OpticalPowerInDbm
  cMsDwdmIfMultiplexSectionReferencePower OpticalPowerInDbm
  cMsDwdmIfMultiplexSectionCalibratedPower OpticalPowerInDbm
  cMsDwdmIfMultiplexSectionInsertionLoss OpticalAttenInDb
  cMsDwdmIfMultiplexSectionActualBand OpticalBand
  cMsDwdmIfMultiplexSectionExpectedBand OpticalBand
  cMsDwdmIfMultiplexSectionSideIdentifier SideIdentifier

CMsDwdmIfChannelEntry  
SEQUENCE    
  cMsDwdmIfChannelRingDirection RingDirection
  cMsDwdmIfChannelPortRule OpticalPortRule
  cMsDwdmIfChannelPower OpticalPowerInDbm
  cMsDwdmIfChannelReferencePower OpticalPowerInDbm
  cMsDwdmIfChannelCalibratedPower OpticalPowerInDbm
  cMsDwdmIfChannelInsertionLoss OpticalAttenInDb
  cMsDwdmIfChannelActualWavelength OpticalWavelength
  cMsDwdmIfChannelExpectedWavelength OpticalWavelength
  cMsDwdmIfChannelSideIdentifier SideIdentifier

CMsDwdmOtnThresholdsEntry  
SEQUENCE    
  cMsDwdmOtnThreshMonType MonitorType
  cMsDwdmOtnThreshIntervalType LocationAndIntervalType
  cMsDwdmOtnThreshFC Unsigned32
  cMsDwdmOtnThreshES Unsigned32
  cMsDwdmOtnThreshSES Unsigned32
  cMsDwdmOtnThreshUAS Unsigned32
  cMsDwdmOtnThreshBBE Unsigned32

CMsDwdmOtnCurrentEntry  
SEQUENCE    
  cMsDwdmOtnCurrentMonType MonitorType
  cMsDwdmOtnCurIntervalType LocationAndIntervalType
  cMsDwdmOtnCurrentFC Counter32
  cMsDwdmOtnCurrentES Counter32
  cMsDwdmOtnCurrentSES Counter32
  cMsDwdmOtnCurrentUAS Counter32
  cMsDwdmOtnCurrentBBE Counter32
  cMsDwdmOtnCurrentESR Counter32
  cMsDwdmOtnCurrentSESR Counter32
  cMsDwdmOtnCurrentBBER Counter32

CMsDwdmOtnIntervalEntry  
SEQUENCE    
  cMsDwdmOtnIntervalMonType MonitorType
  cMsDwdmOtnIntervalType LocationAndIntervalType
  cMsDwdmOtnIntervalNum Integer32
  cMsDwdmOtnIntervalFC Counter32
  cMsDwdmOtnIntervalES Counter32
  cMsDwdmOtnIntervalSES Counter32
  cMsDwdmOtnIntervalUAS Counter32
  cMsDwdmOtnIntervalBBE Counter32
  cMsDwdmOtnIntervalESR Counter32
  cMsDwdmOtnIntervalSESR Counter32
  cMsDwdmOtnIntervalBBER Counter32
  cMsDwdmOtnIntervalValidData TruthValue

CMsDwdmFECThresholdsEntry  
SEQUENCE    
  cMsDwdmFECThreshIntervalType CerentPeriod
  cMsDwdmFECThreshBitErrCor Unsigned32
  cMsDwdmFECThreshByteErrCor Unsigned32
  cMsDwdmFECThreshZeroErrDet Unsigned32
  cMsDwdmFECThreshOneErrDet Unsigned32
  cMsDwdmFECThreshUncorWords Unsigned32

CMsDwdmFECCurrentEntry  
SEQUENCE    
  cMsDwdmFECCurIntervalType CerentPeriod
  cMsDwdmFECCurrentBitErrCor Counter32
  cMsDwdmFECCurrentByteErrCor Counter32
  cMsDwdmFECCurrentZeroErrDet Counter32
  cMsDwdmFECCurrentOneErrDet Counter32
  cMsDwdmFECCurrentUncorWords Counter32

CMsDwdmFECIntervalEntry  
SEQUENCE    
  cMsDwdmFECIntervalType CerentPeriod
  cMsDwdmFECIntervalNum Integer32
  cMsDwdmFECIntervalBitErrCor Counter32
  cMsDwdmFECIntervalByteErrCor Counter32
  cMsDwdmFECIntervalZeroErrDet Counter32
  cMsDwdmFECIntervalOneErrDet Counter32
  cMsDwdmFECIntervalUncorWords Counter32
  cMsDwdmFECIntervalValidData TruthValue

C8B10BThresholdsEntry  
SEQUENCE    
  c8B10BThreshIntervalType IntervalType
  c8B10BThreshInvalidPkts Unsigned32
  c8B10BThreshIPOverflow Unsigned32
  c8B10BThreshHCInvalidPkts Counter64
  c8B10BThreshValidPkts Unsigned32
  c8B10BThreshVPOverflow Unsigned32
  c8B10BThreshHCValidPkts Counter64
  c8B10BThreshIdleSets Unsigned32
  c8B10BThreshISOverflow Unsigned32
  c8B10BThreshHCIdleSets Counter64
  c8B10BThreshNonIdleSets Unsigned32
  c8B10BThreshNISOverflow Unsigned32
  c8B10BThreshHCNonIdleSets Counter64
  c8B10BThreshDataSets Unsigned32
  c8B10BThreshDSOverflow Unsigned32
  c8B10BThreshHCDataSets Counter64
  c8B10BThreshCodeViols Unsigned32
  c8B10BThreshCVOverflow Unsigned32
  c8B10BThreshHCCodeViols Counter64

C8B10BCurrentEntry  
SEQUENCE    
  c8B10BCurIntervalType IntervalType
  c8B10BCurrentCodeViols Counter32
  c8B10BCurrentCVOverflow Counter32
  c8B10BCurrentHCCodeViols Counter64
  c8B10BCurrentValidPkts Counter32
  c8B10BCurrentVPOverflow Counter32
  c8B10BCurrentHCValidPkts Counter64
  c8B10BCurrentInvalidPkts Counter32
  c8B10BCurrentIPOverflow Counter32
  c8B10BCurrentHCInvalidPkts Counter64
  c8B10BCurrentIdleSets Counter32
  c8B10BCurrentISOverflow Counter32
  c8B10BCurrentHCIdleSets Counter64
  c8B10BCurrentNonIdleSets Counter32
  c8B10BCurrentNISOverflow Counter32
  c8B10BCurrentHCNonIdleSets Counter64
  c8B10BCurrentDataSets Counter32
  c8B10BCurrentDSOverflow Counter32
  c8B10BCurrentHCDataSets Counter64

C8B10BIntervalEntry  
SEQUENCE    
  c8B10BIntervalType IntervalType
  c8B10BIntervalNum Integer32
  c8B10BIntervalCodeViols Counter32
  c8B10BIntervalCVOverflow Counter32
  c8B10BIntervalHCCodeViols Counter64
  c8B10BIntervalValidPkts Counter32
  c8B10BIntervalVPOverflow Counter32
  c8B10BIntervalHCValidPkts Counter64
  c8B10BIntervalInvalidPkts Counter32
  c8B10BIntervalIPOverflow Counter32
  c8B10BIntervalHCInvalidPkts Counter64
  c8B10BIntervalIdleSets Counter32
  c8B10BIntervalISOverflow Counter32
  c8B10BIntervalHCIdleSets Counter64
  c8B10BIntervalNonIdleSets Counter32
  c8B10BIntervalNISOverflow Counter32
  c8B10BIntervalHCNonIdleSets Counter64
  c8B10BIntervalDataSets Counter32
  c8B10BIntervalDSOverflow Counter32
  c8B10BIntervalHCDataSets Counter64
  c8B10BIntervalValidData TruthValue

Defined Values

cerentMsDwdmMIB 1.3.6.1.4.1.3607.1.10.80
This MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol specific error counters for DWDM optical switches. This MIB contains four groups. The first group, cerentMsDwdmIfGroup, handles the physical layer related interface configurations. The second group, cerentMsDwdmOtnGroup, provides objects for configuring OTN (G.709) related thresholds and for collecting OTN (G.709) related performance statistics for the current and previous 15 min and 24 hour intervals. The third group, cerentMsDwdmFECGroup provides objects for monitoring FEC (Fault Error Correction) statistics for the current and previous 15 min and 24 hour intervals. It also contains objects for configuring FEC error thresholds. The fourth group,cerentMsDwdm8B10BGroup contains 8B10B counters, for the current and previous 15 min and 24 hour intervals for interfaces like Fiber Channel/Gig E.
MODULE-IDENTITY    

cerentMsDwdmMIBObjects 1.3.6.1.4.1.3607.2.40
OBJECT IDENTIFIER    

cerentMsDwdmIf 1.3.6.1.4.1.3607.2.40.1
OBJECT IDENTIFIER    

cerentMsDwdmOtn 1.3.6.1.4.1.3607.2.40.2
OBJECT IDENTIFIER    

cerentMsDwdmFEC 1.3.6.1.4.1.3607.2.40.3
OBJECT IDENTIFIER    

cerentMsDwdm8B10B 1.3.6.1.4.1.3607.2.40.4
OBJECT IDENTIFIER    

cMsDwdmIfConfigTable 1.3.6.1.4.1.3607.2.40.1.1
This table allows physical layer related interface configurations on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmIfConfigEntry

cMsDwdmIfConfigEntry 1.3.6.1.4.1.3607.2.40.1.1.1
A collection of objects for configuration on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmIfConfigEntry  

cMsDwdmIfConfigProtocol 1.3.6.1.4.1.3607.2.40.1.1.1.1
This object is used to specify the protocol of the data carried over the interface. This object applies to linecards which support a variety of protocols and allow dynamic configuration of the specific protocol to be monitored on the interface. The ifType value for such interfaces remains fixed.
Status: current Access: read-write
OBJECT-TYPE    
  ProtocolType  

cMsDwdmIfConfigDataRate 1.3.6.1.4.1.3607.2.40.1.1.1.2
This object allows the management client to set the data rate across the interface. passThru denotes 2R, Reamplification and reshaping. stm1 denotes 3R, Reamp, reshaping and reclocking. stm4 denotes 3R, Reamp, reshaping and reclocking. stm16 denotes 3R, Reamp, reshaping and reclocking. stm64 denotes 3R, Reamp, reshaping and reclocking. gigE denotes 3R, Reamp, reshaping and reclocking. tenGigE denotes 3R, Reamp, reshaping and reclocking. fc denotes 3R, Reamp, reshaping and reclocking. oneGfcFicon denotes 3R, Reamp, reshaping and reclocking. twoGfcFiconIsc3 denotes 3R, Reamp, reshaping and reclocking. escon denotes 2R, Reamp and reshaping. dv6000 denotes 2R, Reamp and reshaping. sdiD1Video denotes 2R, Reamp and reshaping. hdtv denotes 2R, Reamp and reshaping. oc3 denotes 3R, Reamp, reshaping and reclocking. oc12 denotes 3R, Reamp, reshaping and reclocking. oc48 denotes 3R, Reamp, reshaping and reclocking. oc192 denotes 3R, Reamp, reshaping and reclocking. infiniBand denotes 3R, Reamp, reshaping and reclocking. fe denotes 3R, Reamp, reshaping and reclocking. e3t3 denotes 3R, Reamp, reshaping and reclocking. oc3Ge denotes 3R, Reamp, reshaping and reclocking.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER passThru(10), stm1(20), stm4(30), stm16(40), stm64(50), stm256(55), gigE(60), tenGigE(70), fc(80), oneGfcFicon(90), twoGfcFiconIsc3(100), escon(110), dv6000(120), sdiD1Video(130), hdtv(140), oc3(150), oc12(160), oc48(170), oc192(180), fourGfcFicon(190), tenGfc(200), isc1(210), isc3(220), oneGigIsc3(230), twoGigIsc3(240), etrClo(250), infiniBand(280), fe(290), e1t1(300), e3t3(310), oc3Ge(320), eightGfc(330), oc768(340), otu1(350), otu2(360), otu3(370), otu4(380), oneHundredGe(390)  

cMsDwdmIfConfigLoopback 1.3.6.1.4.1.3607.2.40.1.1.1.3
This object allows the management client to configure loopback for the client side or trunk side interfaces. 'noLoop' - No Loopback present. 'diagnosticLoop' - This is an internal loopback, where the data stream is looped from the transmit to receive section. It is used for hardware debug, bring-up and diagnostics. 'lineLoop' - In this mode, the receive data stream is looped back to the transmit side. 'otherLoop' - This indicates loopbacks not defined here. The default value of this object will be 'noLoop'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noLoop(1), diagnosticLoop(2), lineLoop(3), otherLoop(4)  

cMsDwdmIfConfigWavelength 1.3.6.1.4.1.3607.2.40.1.1.1.4
This object allows the management client to configure the wavelength mode of operation to the applicable interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalWavelength  

cMsDwdmIfConfigOtnStatus 1.3.6.1.4.1.3607.2.40.1.1.1.5
This object allows the management client to enable the OTN (G.709) on an applicable interface,by writing a value of 'true' to this object. To bypass the monitoring hardware, a value of 'false' is written to this object. This object is not applicable to client side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cMsDwdmIfConfigFECStatus 1.3.6.1.4.1.3607.2.40.1.1.1.6
This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'true' to this object.To disable FEC, a value of 'false' must be written to this object. This object is not applicable to client side interfaces. This object is being replaced by cMsDwdmIfConfigFECMode and is going to become obsolete in the future releases.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

cMsDwdmIfOpticsValidIntervals 1.3.6.1.4.1.3607.2.40.1.1.1.7
This object gives the number of contiguous 15 minute intervals for which valid Optical Monitor PM data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..96  

cMsDwdmIfOTNValidIntervals 1.3.6.1.4.1.3607.2.40.1.1.1.8
This object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if OTN is turned off.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..96  

cMsDwdmIfFECValidIntervals 1.3.6.1.4.1.3607.2.40.1.1.1.9
This object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is turned off.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..96  

cMsDwdmIfConfigFECMode 1.3.6.1.4.1.3607.2.40.1.1.1.10
This object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'enableStandard' or 'enableEnhanced' to this object. To disable FEC, a value of 'disable' must be written to this object. This object is not applicable to client side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), enableStandard(2), enableEnhanced(3), enableEnhancedI4(4), enableEnhancedI7(5), enableEnhanced20(6), enableHG7(7)  

cMsDwdmIfTransportTable 1.3.6.1.4.1.3607.2.40.1.2
This table defines optical transport layer related interface configurations on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmIfTransportEntry

cMsDwdmIfTransportEntry 1.3.6.1.4.1.3607.2.40.1.2.1
A collection of objects for configuration on an optical transport interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmIfTransportEntry  

cMsDwdmIfTransportRingDirection 1.3.6.1.4.1.3607.2.40.1.2.1.1
This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  RingDirection  

cMsDwdmIfTransportPortRule 1.3.6.1.4.1.3607.2.40.1.2.1.2
This object is used to specify the type of the optical port. A transport optical port can assume one of the following values: input(1) input-express(2) output(3) output-express(4).
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPortRule  

cMsDwdmIfTransportPower 1.3.6.1.4.1.3607.2.40.1.2.1.3
This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfTransportReferencePower 1.3.6.1.4.1.3607.2.40.1.2.1.4
This object is used to specify the optical transport reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfTransportCalibratedPower' can be used to add an offset to the network element setup value.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfTransportCalibratedPower 1.3.6.1.4.1.3607.2.40.1.2.1.5
This object is used to specify the optical transport calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfTransportInsertionLoss 1.3.6.1.4.1.3607.2.40.1.2.1.6
This object is used to specify the value of Insertion Loss of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportLaserStatus 1.3.6.1.4.1.3607.2.40.1.2.1.7
This object is used to specify the status of the laser.
Status: current Access: read-only
OBJECT-TYPE    
  LaserStatus  

cMsDwdmIfTransportAmplifierMode 1.3.6.1.4.1.3607.2.40.1.2.1.8
This object is used to specify the working amplifier mode.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalAmplifierMode  

cMsDwdmIfTransportGain 1.3.6.1.4.1.3607.2.40.1.2.1.9
This object is used to specify the value of the gain of an amplifier
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportReferenceTilt 1.3.6.1.4.1.3607.2.40.1.2.1.10
This object is used to specify the amplifier tilt value calculated by the network element.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportCalibratedTilt 1.3.6.1.4.1.3607.2.40.1.2.1.11
This object is used to specify the amplifier tilt offset added as offset by user in order to tune the network element calculated ('reference') value
Status: current Access: read-write
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportDCULoss 1.3.6.1.4.1.3607.2.40.1.2.1.12
This object is used to specify the value of Insertion Loss measured for the Dispersion Compensation Unit
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportOSRI 1.3.6.1.4.1.3607.2.40.1.2.1.13
This value indicates the status of the Optical Safety Remote Interlock Valid values are - enable(1) : the OSRI is enable disable(2) : the OSRI is disable none(3) : the OSRI functionality is not present
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), none(3)  

cMsDwdmIfTransportExpectedGain 1.3.6.1.4.1.3607.2.40.1.2.1.14
This object is used to specify the value of the expected gain of an amplifier
Status: current Access: read-write
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfTransportSideIdentifier 1.3.6.1.4.1.3607.2.40.1.2.1.15
This object is used to specify the facing side of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  SideIdentifier  

cMsDwdmIfTransportTDCUCompensation 1.3.6.1.4.1.3607.2.40.1.2.1.18
This object is used to specify the TDCU Compensation value of the optical port belong to a TDCU card.
Status: current Access: read-only
OBJECT-TYPE    
  TDCUCompensation  

cMsDwdmIfTransportAddPower 1.3.6.1.4.1.3607.2.40.1.2.1.16
This object is used to specify the ADD optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfTransportOSCPower 1.3.6.1.4.1.3607.2.40.1.2.1.17
This object is used to specify the OSC optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfMultiplexSectionTable 1.3.6.1.4.1.3607.2.40.1.3
This table defines optical multiplex section (band) layer related interface configurations on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmIfMultiplexSectionEntry

cMsDwdmIfMultiplexSectionEntry 1.3.6.1.4.1.3607.2.40.1.3.1
A collection of objects for configuration on an optical multiplex section (band) interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmIfMultiplexSectionEntry  

cMsDwdmIfMultiplexSectionRingDirection 1.3.6.1.4.1.3607.2.40.1.3.1.1
This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  RingDirection  

cMsDwdmIfMultiplexSectionPortRule 1.3.6.1.4.1.3607.2.40.1.3.1.2
This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPortRule  

cMsDwdmIfMultiplexSectionPower 1.3.6.1.4.1.3607.2.40.1.3.1.3
This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfMultiplexSectionReferencePower 1.3.6.1.4.1.3607.2.40.1.3.1.4
This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfMultiplexSectionCalibratedPower' can be used to add an offset to the network element setup value.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfMultiplexSectionCalibratedPower 1.3.6.1.4.1.3607.2.40.1.3.1.5
This object is used to specify the optical MultiplexSection calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfMultiplexSectionInsertionLoss 1.3.6.1.4.1.3607.2.40.1.3.1.6
This object is used to specify the value of Insertion Loss of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfMultiplexSectionActualBand 1.3.6.1.4.1.3607.2.40.1.3.1.7
This object is used to specify the value of Wavelength group which is tuned the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalBand  

cMsDwdmIfMultiplexSectionExpectedBand 1.3.6.1.4.1.3607.2.40.1.3.1.8
This object is used to specify the value of Wavelength group that the user expects the optical port will assume.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalBand  

cMsDwdmIfMultiplexSectionSideIdentifier 1.3.6.1.4.1.3607.2.40.1.3.1.9
This object is used to specify the facing side of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  SideIdentifier  

cMsDwdmIfChannelTable 1.3.6.1.4.1.3607.2.40.1.4
This table defines optical channel layer related interface configurations on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmIfChannelEntry

cMsDwdmIfChannelEntry 1.3.6.1.4.1.3607.2.40.1.4.1
A collection of objects for configuration on an optical channel interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmIfChannelEntry  

cMsDwdmIfChannelRingDirection 1.3.6.1.4.1.3607.2.40.1.4.1.1
This object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  RingDirection  

cMsDwdmIfChannelPortRule 1.3.6.1.4.1.3607.2.40.1.4.1.2
This object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPortRule  

cMsDwdmIfChannelPower 1.3.6.1.4.1.3607.2.40.1.4.1.3
This object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfChannelReferencePower 1.3.6.1.4.1.3607.2.40.1.4.1.4
This object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfChannelCalibratedPower' can be used to add an offset to the network element setup value.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfChannelCalibratedPower 1.3.6.1.4.1.3607.2.40.1.4.1.5
This object is used to specify the optical Channel calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalPowerInDbm  

cMsDwdmIfChannelInsertionLoss 1.3.6.1.4.1.3607.2.40.1.4.1.6
This object is used to specify the value of Insertion Loss of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalAttenInDb  

cMsDwdmIfChannelActualWavelength 1.3.6.1.4.1.3607.2.40.1.4.1.7
This object is used to specify the value of Wavelength that is tuned the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  OpticalWavelength  

cMsDwdmIfChannelExpectedWavelength 1.3.6.1.4.1.3607.2.40.1.4.1.8
This object is used to specify the value of Wavelength that the user expects the optical port will assume.
Status: current Access: read-write
OBJECT-TYPE    
  OpticalWavelength  

cMsDwdmIfChannelSideIdentifier 1.3.6.1.4.1.3607.2.40.1.4.1.9
This object is used to specify the facing side of the optical port.
Status: current Access: read-only
OBJECT-TYPE    
  SideIdentifier  

cMsDwdmOtnThresholdsTable 1.3.6.1.4.1.3607.2.40.2.1
This table provides objects for configuring OTN ( G.709 ) thresholds on trunk side interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmOtnThresholdsEntry

cMsDwdmOtnThresholdsEntry 1.3.6.1.4.1.3607.2.40.2.1.1
An entry in the cMsDwdmOtnThresholdsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmOtnThresholdsEntry  

cMsDwdmOtnThreshMonType 1.3.6.1.4.1.3607.2.40.2.1.1.1
This object is an index to the cMsDwdmOtnThresholdsTable. It is used to specify the type of monitoring threshold being set on an interface for OTN ( G.709 ) statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  MonitorType  

cMsDwdmOtnThreshIntervalType 1.3.6.1.4.1.3607.2.40.2.1.1.2
This object is an index to the cMsDwdmOtnThresholdsTable. It specifies the interval type and monitoring location for the performance statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  LocationAndIntervalType  

cMsDwdmOtnThreshFC 1.3.6.1.4.1.3607.2.40.2.1.1.3
This object is used to set the threshold for the number of failure counts on applicable trunk side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmOtnThreshES 1.3.6.1.4.1.3607.2.40.2.1.1.4
This object is used to set the threshold for the number of Errored Seconds on applicable trunk side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmOtnThreshSES 1.3.6.1.4.1.3607.2.40.2.1.1.5
This object is used to set the threshold for the number of Severely Errored Seconds on applicable trunk side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmOtnThreshUAS 1.3.6.1.4.1.3607.2.40.2.1.1.6
This object is used to set the threshold for the number of Unavailable Seconds on applicable trunk side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmOtnThreshBBE 1.3.6.1.4.1.3607.2.40.2.1.1.7
This object is used to set the threshold for the number of Bit Block Errors on applicable trunk side interfaces.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmOtnCurrentTable 1.3.6.1.4.1.3607.2.40.2.2
This table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmOtnCurrentEntry

cMsDwdmOtnCurrentEntry 1.3.6.1.4.1.3607.2.40.2.2.1
An entry in the cMsDwdmOtnCurrentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmOtnCurrentEntry  

cMsDwdmOtnCurrentMonType 1.3.6.1.4.1.3607.2.40.2.2.1.1
This object is an index to the cMsDwdmOtnCurrentTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).
Status: current Access: not-accessible
OBJECT-TYPE    
  MonitorType  

cMsDwdmOtnCurIntervalType 1.3.6.1.4.1.3607.2.40.2.2.1.2
This object is an index to the cMsDwdmOtnCurrentTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  LocationAndIntervalType  

cMsDwdmOtnCurrentFC 1.3.6.1.4.1.3607.2.40.2.2.1.3
The counter associated with the number of failure counts encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentES 1.3.6.1.4.1.3607.2.40.2.2.1.4
The counter associated with the number of Errored Seconds encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentSES 1.3.6.1.4.1.3607.2.40.2.2.1.5
The counter associated with the number of Severely Errored Seconds encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentUAS 1.3.6.1.4.1.3607.2.40.2.2.1.6
The counter associated with the number of Unavailable Seconds encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentBBE 1.3.6.1.4.1.3607.2.40.2.2.1.7
The counter associated with the number of Background Block Errors encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentESR 1.3.6.1.4.1.3607.2.40.2.2.1.8
The counter associated with the Errored Seconds Ratio on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentSESR 1.3.6.1.4.1.3607.2.40.2.2.1.9
The counter associated with the Severely Errored Seconds ratio on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnCurrentBBER 1.3.6.1.4.1.3607.2.40.2.2.1.10
The counter associated with the Background Block Errors ratio on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalTable 1.3.6.1.4.1.3607.2.40.2.3
This table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmOtnIntervalEntry

cMsDwdmOtnIntervalEntry 1.3.6.1.4.1.3607.2.40.2.3.1
An entry in the cMsDwdmOtnIntervalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmOtnIntervalEntry  

cMsDwdmOtnIntervalMonType 1.3.6.1.4.1.3607.2.40.2.3.1.1
This object is an index to the cMsDwdmOtnIntervalTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).
Status: current Access: not-accessible
OBJECT-TYPE    
  MonitorType  

cMsDwdmOtnIntervalType 1.3.6.1.4.1.3607.2.40.2.3.1.2
This object is an index to the cMsDwdmOtnIntervalTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.
Status: current Access: not-accessible
OBJECT-TYPE    
  LocationAndIntervalType  

cMsDwdmOtnIntervalNum 1.3.6.1.4.1.3607.2.40.2.3.1.3
This object is an index to the cMsDwdmOtnIntervalTable. This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of OTN performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

cMsDwdmOtnIntervalFC 1.3.6.1.4.1.3607.2.40.2.3.1.4
The counter associated with the number of failure counts encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalES 1.3.6.1.4.1.3607.2.40.2.3.1.5
The counter associated with the number of Errored Seconds encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalSES 1.3.6.1.4.1.3607.2.40.2.3.1.6
The counter associated with the number of Severely Errored Seconds encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalUAS 1.3.6.1.4.1.3607.2.40.2.3.1.7
The counter associated with the number of Unavailable Seconds encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalBBE 1.3.6.1.4.1.3607.2.40.2.3.1.8
The counter associated with the number of Background Block Errors encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalESR 1.3.6.1.4.1.3607.2.40.2.3.1.9
The counter associated with the Errored Seconds Ratio on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalSESR 1.3.6.1.4.1.3607.2.40.2.3.1.10
The counter associated with the Severely Errored Seconds ratio on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalBBER 1.3.6.1.4.1.3607.2.40.2.3.1.11
The counter associated with the Background Block Errors ratio on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmOtnIntervalValidData 1.3.6.1.4.1.3607.2.40.2.3.1.12
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cMsDwdmFECThresholdsTable 1.3.6.1.4.1.3607.2.40.3.1
This table contains the configurable thresholds for FEC ( Forward Error Correction ) statistics.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmFECThresholdsEntry

cMsDwdmFECThresholdsEntry 1.3.6.1.4.1.3607.2.40.3.1.1
An entry in the cMsDwdmFECThresholdsTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmFECThresholdsEntry  

cMsDwdmFECThreshIntervalType 1.3.6.1.4.1.3607.2.40.3.1.1.1
This object is an index to the cMsDwdmFECThreshTable. It gives the type of the interval for which the thresholds are being set.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerentPeriod  

cMsDwdmFECThreshBitErrCor 1.3.6.1.4.1.3607.2.40.3.1.1.2
This object sets the threshold value of the number of Bit Errors Corrected on an applicable trunk side interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmFECThreshByteErrCor 1.3.6.1.4.1.3607.2.40.3.1.1.3
This object sets the threshold value of the number of Byte Errors Corrected on an applicable trunk side interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmFECThreshZeroErrDet 1.3.6.1.4.1.3607.2.40.3.1.1.4
This object sets the threshold value of the number of zero bit errors detected on an applicable trunk side interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmFECThreshOneErrDet 1.3.6.1.4.1.3607.2.40.3.1.1.5
This object sets the threshold value of the number of one bit errors detected on an applicable trunk side interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmFECThreshUncorWords 1.3.6.1.4.1.3607.2.40.3.1.1.6
This object sets the threshold value of the number of Uncorrectable Words on an applicable trunk side interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

cMsDwdmFECCurrentTable 1.3.6.1.4.1.3607.2.40.3.2
This table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmFECCurrentEntry

cMsDwdmFECCurrentEntry 1.3.6.1.4.1.3607.2.40.3.2.1
An entry in the cMsDwdmFECCurrentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmFECCurrentEntry  

cMsDwdmFECCurIntervalType 1.3.6.1.4.1.3607.2.40.3.2.1.1
This object is an index to the cMsDwdmFECCurrentTable. It gives the type of interval for which the FEC values have been collected.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerentPeriod  

cMsDwdmFECCurrentBitErrCor 1.3.6.1.4.1.3607.2.40.3.2.1.2
The counter associated with the number of Bit Errors Corrected on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECCurrentByteErrCor 1.3.6.1.4.1.3607.2.40.3.2.1.3
The counter associated with the number of Byte Errors Corrected on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECCurrentZeroErrDet 1.3.6.1.4.1.3607.2.40.3.2.1.4
The counter associated with the number of zero bit errors detected on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECCurrentOneErrDet 1.3.6.1.4.1.3607.2.40.3.2.1.5
The counter associated with the number of one bit errors detected on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECCurrentUncorWords 1.3.6.1.4.1.3607.2.40.3.2.1.6
The counter associated with the number of Uncorrectable Words encountered on this interface in the current interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalTable 1.3.6.1.4.1.3607.2.40.3.3
This table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    CMsDwdmFECIntervalEntry

cMsDwdmFECIntervalEntry 1.3.6.1.4.1.3607.2.40.3.3.1
An entry in the cMsDwdmFECIntervalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  CMsDwdmFECIntervalEntry  

cMsDwdmFECIntervalType 1.3.6.1.4.1.3607.2.40.3.3.1.1
This object is an index to the cMsDwdmFECIntervalTable. It gives the type of interval for which the FEC values have been collected.
Status: current Access: not-accessible
OBJECT-TYPE    
  CerentPeriod  

cMsDwdmFECIntervalNum 1.3.6.1.4.1.3607.2.40.3.3.1.2
This object is an index to the cMsDwdmFECIntervalTable. It is a number between 1 and 96, which identifies the interval for which the set of FEC PM values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

cMsDwdmFECIntervalBitErrCor 1.3.6.1.4.1.3607.2.40.3.3.1.3
The counter associated with the number of Bit Errors Corrected on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalByteErrCor 1.3.6.1.4.1.3607.2.40.3.3.1.4
The counter associated with the number of Byte Errors Corrected on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalZeroErrDet 1.3.6.1.4.1.3607.2.40.3.3.1.5
The counter associated with the number of zero bit errors detected on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalOneErrDet 1.3.6.1.4.1.3607.2.40.3.3.1.6
The counter associated with the number of one bit errors detected on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalUncorWords 1.3.6.1.4.1.3607.2.40.3.3.1.7
The counter associated with the number of Uncorrectable Words encountered on this interface in a particular interval.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

cMsDwdmFECIntervalValidData 1.3.6.1.4.1.3607.2.40.3.3.1.8
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

c8B10BThresholdsTable 1.3.6.1.4.1.3607.2.40.4.1
This table contains the configurable thresholds for the 8B10B stats.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C8B10BThresholdsEntry

c8B10BThresholdsEntry 1.3.6.1.4.1.3607.2.40.4.1.1
An entry in the c8B10BThresholds Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  C8B10BThresholdsEntry  

c8B10BThreshIntervalType 1.3.6.1.4.1.3607.2.40.4.1.1.1
This object is an index to the c8B10BThresholdsTable. It gives the type of interval.
Status: current Access: not-accessible
OBJECT-TYPE    
  IntervalType  

c8B10BThreshInvalidPkts 1.3.6.1.4.1.3607.2.40.4.1.1.2
This object represents the lower word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshIPOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshIPOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.3
This object represents the higher word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshInvalidPkts contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCInvalidPkts 1.3.6.1.4.1.3607.2.40.4.1.1.4
This object is used to obtain the value of threshold configured for the number of 8B10B Invalid Packets. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BThreshValidPkts 1.3.6.1.4.1.3607.2.40.4.1.1.5
This object represents the lower word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshVPOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshVPOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.6
This object represents the higher word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshValidPkts contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCValidPkts 1.3.6.1.4.1.3607.2.40.4.1.1.7
This object is used to obtain the value of threshold configured for the number of 8B10B Valid Packets. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BThreshIdleSets 1.3.6.1.4.1.3607.2.40.4.1.1.8
This object represents the lower word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshISOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshISOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.9
This object represents the higher word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshIdleSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCIdleSets 1.3.6.1.4.1.3607.2.40.4.1.1.10
This object is used to obtain the value of threshold configured for the number of 8B10B idle sets. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BThreshNonIdleSets 1.3.6.1.4.1.3607.2.40.4.1.1.11
This object represents the lower word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNISOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshNISOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.12
This object represents the higher word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNonIdleSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCNonIdleSets 1.3.6.1.4.1.3607.2.40.4.1.1.13
This object is used to obtain the value of threshold configured for the number of 8B10B non idle sets. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BThreshDataSets 1.3.6.1.4.1.3607.2.40.4.1.1.14
This object represents the lower word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDSOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshDSOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.15
This object represents the higher word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDataSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCDataSets 1.3.6.1.4.1.3607.2.40.4.1.1.16
This object is used to obtain the value of threshold configured for the number of 8B10B data code groups. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BThreshCodeViols 1.3.6.1.4.1.3607.2.40.4.1.1.17
This object represents the lower word value of the threshold associated with the number of 8B10B coding violations encountered. The object c8B10BThreshCVOverflow contains the higher 32 bit value of this number.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshCVOverflow 1.3.6.1.4.1.3607.2.40.4.1.1.18
This object represents the higher word value of threshold associated with the number of 8B10B code violations encountered. The object c8B10BThreshCodeViols contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

c8B10BThreshHCCodeViols 1.3.6.1.4.1.3607.2.40.4.1.1.19
This object is used to obtain the value of threshold configured for the number of 8B10B Coding Violations on this interface. This a High capacity ( 64 bits ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentTable 1.3.6.1.4.1.3607.2.40.4.2
This table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C8B10BCurrentEntry

c8B10BCurrentEntry 1.3.6.1.4.1.3607.2.40.4.2.1
An entry in the c8B10BCurrentTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C8B10BCurrentEntry  

c8B10BCurIntervalType 1.3.6.1.4.1.3607.2.40.4.2.1.1
This object is an index to the c8B10BCurrentTable. It gives the type of interval for which 8B10B data has been collected.
Status: current Access: not-accessible
OBJECT-TYPE    
  IntervalType  

c8B10BCurrentCodeViols 1.3.6.1.4.1.3607.2.40.4.2.1.2
This object gives the value of the number of 8B10B Coding Violations encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentCVOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCCodeViols, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentCVOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.3
This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for the current interval. If the value of c8B10BCurrentCodeViols is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCCodeViols, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCCodeViols 1.3.6.1.4.1.3607.2.40.4.2.1.4
The counter associated with the number of 8B10B coding violations encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentValidPkts 1.3.6.1.4.1.3607.2.40.4.2.1.5
This object gives the value of the number of 8B10B Valid Packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentVPOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCValidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentVPOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.6
This object gives the higher word value the number of 8B10B valid packets encountered on an interface for the current interval. If the value of c8B10BCurrentValidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCValidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCValidPkts 1.3.6.1.4.1.3607.2.40.4.2.1.7
The counter associated with the number of 8B10B valid packets on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentInvalidPkts 1.3.6.1.4.1.3607.2.40.4.2.1.8
This object gives the value of the number of 8B10B invalid packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentIPOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCInvalidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentIPOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.9
This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for the current interval. If the value of c8B10BCurrentInvalidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCInvalidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCInvalidPkts 1.3.6.1.4.1.3607.2.40.4.2.1.10
The counter associated with the number of 8B10B invalid packets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentIdleSets 1.3.6.1.4.1.3607.2.40.4.2.1.11
This object gives the value of the number of 8B10B Idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentISOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentISOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.12
This object gives the higher word value the number of 8B10B idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCIdleSets 1.3.6.1.4.1.3607.2.40.4.2.1.13
The counter associated with the number of 8B10B idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentNonIdleSets 1.3.6.1.4.1.3607.2.40.4.2.1.14
This object gives the value of the number of 8B10B non idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentNISOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCNonIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentNISOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.15
This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentNonIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCNonIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCNonIdleSets 1.3.6.1.4.1.3607.2.40.4.2.1.16
The counter associated with the number of 8B10B non-idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BCurrentDataSets 1.3.6.1.4.1.3607.2.40.4.2.1.17
This object gives the value of the number of 8B10B data code groups encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentDSOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCDataSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentDSOverflow 1.3.6.1.4.1.3607.2.40.4.2.1.18
This object gives the higher word value the number of 8B10B data code groups encountered on an interface for the current interval. If the value of c8B10BCurrentDataSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCDataSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BCurrentHCDataSets 1.3.6.1.4.1.3607.2.40.4.2.1.19
The counter associated with the number of 8B10B data code groups encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalTable 1.3.6.1.4.1.3607.2.40.4.3
This table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    C8B10BIntervalEntry

c8B10BIntervalEntry 1.3.6.1.4.1.3607.2.40.4.3.1
An entry in the c8B10BIntervalTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  C8B10BIntervalEntry  

c8B10BIntervalType 1.3.6.1.4.1.3607.2.40.4.3.1.1
This object is an index to the c8B10BIntervalTable. It gives the type of interval for which 8B10B data has been collected.
Status: current Access: not-accessible
OBJECT-TYPE    
  IntervalType  

c8B10BIntervalNum 1.3.6.1.4.1.3607.2.40.4.3.1.2
This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of 8B10B performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 1..96  

c8B10BIntervalCodeViols 1.3.6.1.4.1.3607.2.40.4.3.1.3
This object gives the value of the number of 8B10B Coding Violations encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalCVOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCCodeViols, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalCVOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.4
This object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for a particular interval. If the value of c8B10BIntervalCodeViols is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCCodeViols, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCCodeViols 1.3.6.1.4.1.3607.2.40.4.3.1.5
The counter associated with the number of 8B10B coding violations encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalValidPkts 1.3.6.1.4.1.3607.2.40.4.3.1.6
This object gives the value of the number of 8B10B Valid Packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalVPOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCValidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalVPOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.7
This object gives the higher word value the number of 8B10B valid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalValidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCValidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCValidPkts 1.3.6.1.4.1.3607.2.40.4.3.1.8
The counter associated with the number of 8B10B valid packets on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalInvalidPkts 1.3.6.1.4.1.3607.2.40.4.3.1.9
This object gives the value of the number of 8B10B invalid packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalIPOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCInvalidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalIPOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.10
This object gives the higher word value the number of 8B10B invalid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalInvalidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCInvalidPkts, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCInvalidPkts 1.3.6.1.4.1.3607.2.40.4.3.1.11
The counter associated with the number of 8B10B invalid packets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalIdleSets 1.3.6.1.4.1.3607.2.40.4.3.1.12
This object gives the value of the number of 8B10B Idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalISOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalISOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.13
This object gives the higher word value the number of 8B10B idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCIdleSets 1.3.6.1.4.1.3607.2.40.4.3.1.14
The counter associated with the number of 8B10B idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalNonIdleSets 1.3.6.1.4.1.3607.2.40.4.3.1.15
This object gives the value of the number of 8B10B non idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalNISOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCNonIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalNISOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.16
This object gives the higher word value the number of 8B10B non idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalNonIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCNonIdleSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCNonIdleSets 1.3.6.1.4.1.3607.2.40.4.3.1.17
The counter associated with the number of 8B10B non-idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalDataSets 1.3.6.1.4.1.3607.2.40.4.3.1.18
This object gives the value of the number of 8B10B data code groups encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalDSOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCDataSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalDSOverflow 1.3.6.1.4.1.3607.2.40.4.3.1.19
This object gives the higher word value the number of 8B10B data code groups encountered on an interface for a particular interval. If the value of c8B10BIntervalDataSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCDataSets, which is a 64 bit counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

c8B10BIntervalHCDataSets 1.3.6.1.4.1.3607.2.40.4.3.1.20
The counter associated with the number of 8B10B data code groups encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

c8B10BIntervalValidData 1.3.6.1.4.1.3607.2.40.4.3.1.21
This variable indicates if the data for this interval is valid.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

cerentMsDwdmMIBConformance 1.3.6.1.4.1.3607.5.30
OBJECT IDENTIFIER    

cerentMsDwdmMIBCompliances 1.3.6.1.4.1.3607.5.30.1
OBJECT IDENTIFIER    

cerentMsDwdmMIBGroups 1.3.6.1.4.1.3607.5.30.2
OBJECT IDENTIFIER    

cerentMsDwdmMIBCompliance 1.3.6.1.4.1.3607.5.30.1.1
The compliance statement for platforms that monitor the operating status and FEC/OTN with respect to error counters, for the physical layer.
Status: current Access: read-only
MODULE-COMPLIANCE    

cerentMsDwdmIfConfigGroup 1.3.6.1.4.1.3607.5.30.2.1
The collection of objects to allow configurations and give information related to the physical layer characteristics of an interface.
Status: current Access: read-only
OBJECT-GROUP    

cerentMsDwdmOtnGroup 1.3.6.1.4.1.3607.5.30.2.2
The objects used for monitoring the OTN error counters.
Status: current Access: read-only
OBJECT-GROUP    

cerentMsDwdmFECGroup 1.3.6.1.4.1.3607.5.30.2.3
The objects used for monitoring the FEC error counters.
Status: current Access: read-only
OBJECT-GROUP    

cMsDwdmIfTransportGroup 1.3.6.1.4.1.3607.5.30.2.5
The collection of objects to allow configurations and give information related to the optical transportp hysical layer characteristics of an interface.
Status: current Access: read-only
OBJECT-GROUP    

cMsDwdmIfMultiplexSectionTableGroup 1.3.6.1.4.1.3607.5.30.2.6
The collection of objects to allow configurations and give information related to the optical multiplex section physical layer characteristics of an interface.
Status: current Access: read-only
OBJECT-GROUP    

cMsDwdmIfChannelGroup 1.3.6.1.4.1.3607.5.30.2.7
The collection of objects to allow configurations and give information related to the optical channel physical layer characteristics of an interface.
Status: current Access: read-only
OBJECT-GROUP    

cerent8B10BThreshGroup 1.3.6.1.4.1.3607.5.30.2.8
The collection of objects used to set the thresholds on 8B10B counters.
Status: current Access: read-only
OBJECT-GROUP    

cerent8B10BStatsGroup 1.3.6.1.4.1.3607.5.30.2.9
The collection of objects used to monitor the 8B10B error counters.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor