CERENT-IF-EXT-MIB

File: CERENT-IF-EXT-MIB.mib (4839 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
IF-MIB CERENT-GLOBAL-REGISTRY

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
MODULE-COMPLIANCE OBJECT-GROUP TruthValue
ifIndex cerentModules cerentGeneric
cerentRequirements

Defined Types

CerentIfExtEntry  
SEQUENCE    
  cerentIfExtPreServiceAlarmSuppression TruthValue
  cerentIfExtConfiguredSoakTime Integer32
  cerentIfExtCurrentSoakTime Integer32

Defined Values

cerentIfExtMIB 1.3.6.1.4.1.3607.1.10.140
This module defines objects for managing interfaces.
MODULE-IDENTITY    

cerentIfExtMIBObjects 1.3.6.1.4.1.3607.2.100
OBJECT IDENTIFIER    

cerentIfExtTable 1.3.6.1.4.1.3607.2.100.10
This table contains one row per interface.
OBJECT-TYPE    
  SEQUENCE OF  
    CerentIfExtEntry

cerentIfExtEntry 1.3.6.1.4.1.3607.2.100.10.1
Row definition for cerentIfExtTable
OBJECT-TYPE    
  CerentIfExtEntry  

cerentIfExtPreServiceAlarmSuppression 1.3.6.1.4.1.3607.2.100.10.1.10
This object can be set through a management interface. When the administrative state of this interface is 'down', the value of this object does not have any impact. When the administrative state of this interface is 'up', if this object has a value of 'false', an alarm on this interface will be reported. If the value of this object is 'true' then all alarms on this interface will be suppressed. If the interface has a good signal, the soak timer will be started, if the port is faulted before the soak timer expires, the soak timer will be reset to the provisioned maximum value. If the soak timer expires then the value of this object is automatically set to 'false'.
OBJECT-TYPE    
  TruthValue  

cerentIfExtConfiguredSoakTime 1.3.6.1.4.1.3607.2.100.10.1.20
This is the configured maximum value of the soak timer for this interface.
OBJECT-TYPE    
  Integer32  

cerentIfExtCurrentSoakTime 1.3.6.1.4.1.3607.2.100.10.1.30
This is the current value of the soak timer for this interface. The difference between cerntIfExtConfiguredSoakTime and this object gives the time duration for which this interface has had a good signal.
OBJECT-TYPE    
  Integer32  

cerentIfExtMIBConformance 1.3.6.1.4.1.3607.5.90
OBJECT IDENTIFIER    

cerentIfExtMIBCompliances 1.3.6.1.4.1.3607.5.90.1
OBJECT IDENTIFIER    

cerentIfExtMIBGroups 1.3.6.1.4.1.3607.5.90.2
OBJECT IDENTIFIER    

cerentIfExtMIBCompliance 1.3.6.1.4.1.3607.5.90.1.1
Describes the requirements for conformance to the High Capacity Media Independent Group.
MODULE-COMPLIANCE    

cerentIfExtGroup 1.3.6.1.4.1.3607.5.90.2.10
The objects for storing all the current alarm thresholds
OBJECT-GROUP