CERENT-FC-MIB

File: CERENT-FC-MIB.mib (81355 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF IF-MIB
CERENT-TC CERENT-GLOBAL-REGISTRY

Imported symbols

Counter32 Counter64 Integer32
MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP ifIndex CerentPeriod
cerentModules cerentRequirements cerentGeneric

Defined Types

CFcStatsEntry  
SEQUENCE    
  cFcStatsInvalidOrdSets Counter32
  cFcStatsInvalidOrdSetsHigh Counter32
  cFcStatsEncodingDispErr Counter32
  cFcStatsEncodingDispErrHigh Counter32
  cFcStatsInTotalErr Counter32
  cFcStatsInTotalErrHigh Counter32
  cFcStatsInFramesTrunc Counter32
  cFcStatsInFramesTruncHigh Counter32
  cFcStatsInFramesTooLong Counter32
  cFcStatsInFramesTooLongHigh Counter32
  cFcStatsInFramesBadCRC Counter32
  cFcStatsInFramesBadCRCHigh Counter32
  cFcStatsInFrames Counter32
  cFcStatsInFramesHigh Counter32
  cFcStatsInElements Counter32
  cFcStatsInElementsHigh Counter32
  cFcStatsInDiscards Counter32
  cFcStatsInDiscardsHigh Counter32
  cFcStatsOutFramesBadCRC Counter32
  cFcStatsOutFramesBadCRCHigh Counter32
  cFcStatsOutFrames Counter32
  cFcStatsOutFramesHigh Counter32
  cFcStatsOutElements Counter32
  cFcStatsOutElementsHigh Counter32
  cFcStatsOutDiscards Counter32
  cFcStatsOutDiscardsHigh Counter32
  cFcStatsLinkResets Counter32
  cFcStatsLinkResetsHigh Counter32
  cFcStatsGfpInSBitErr Counter32
  cFcStatsGfpInSBitErrHigh Counter32
  cFcStatsGfpInMBitErr Counter32
  cFcStatsGfpInMBitErrHigh Counter32
  cFcStatsGfpInTypeInvalid Counter32
  cFcStatsGfpInTypeInvalidHigh Counter32
  cFcStatsGfpInSBlkCRCErr Counter32
  cFcStatsGfpInSBlkCRCErrHigh Counter32

CFcStatsHCEntry  
SEQUENCE    
  cFcStatsInvalidOrdSetsHC Counter64
  cFcStatsEncodingDispErrHC Counter64
  cFcStatsInTotalErrHC Counter64
  cFcStatsInFramesTruncHC Counter64
  cFcStatsInFramesTooLongHC Counter64
  cFcStatsInFramesBadCRCHC Counter64
  cFcStatsInFramesHC Counter64
  cFcStatsInElementsHC Counter64
  cFcStatsInDiscardsHC Counter64
  cFcStatsOutFramesBadCRCHC Counter64
  cFcStatsOutFramesHC Counter64
  cFcStatsOutElementsHC Counter64
  cFcStatsOutDiscardsHC Counter64
  cFcStatsLinkResetsHC Counter64
  cFcStatsGfpInSBitErrHC Counter64
  cFcStatsGfpInMBitErrHC Counter64
  cFcStatsGfpInTypeInvalidHC Counter64
  cFcStatsGfpInSBlkCRCErrHC Counter64

CFcHistEntry  
SEQUENCE    
  cFcHistIntervalType CerentPeriod
  cFcHistIntervalNum INTEGER
  cFcHistInvalidOrdSets Counter32
  cFcHistInvalidOrdSetsHigh Counter32
  cFcHistEncodingDispErr Counter32
  cFcHistEncodingDispErrHigh Counter32
  cFcHistInTotalErr Counter32
  cFcHistInTotalErrHigh Counter32
  cFcHistInFramesTrunc Counter32
  cFcHistInFramesTruncHigh Counter32
  cFcHistInFramesTooLong Counter32
  cFcHistInFramesTooLongHigh Counter32
  cFcHistInFramesBadCRC Counter32
  cFcHistInFramesBadCRCHigh Counter32
  cFcHistInFrames Counter32
  cFcHistInFramesHigh Counter32
  cFcHistInElements Counter32
  cFcHistInElementsHigh Counter32
  cFcHistInDiscards Counter32
  cFcHistInDiscardsHigh Counter32
  cFcHistOutFramesBadCRC Counter32
  cFcHistOutFramesBadCRCHigh Counter32
  cFcHistOutFrames Counter32
  cFcHistOutFramesHigh Counter32
  cFcHistOutElements Counter32
  cFcHistOutElementsHigh Counter32
  cFcHistOutDiscards Counter32
  cFcHistOutDiscardsHigh Counter32
  cFcHistLinkResets Counter32
  cFcHistLinkResetsHigh Counter32
  cFcHistGfpInSBitErr Counter32
  cFcHistGfpInSBitErrHigh Counter32
  cFcHistGfpInMBitErr Counter32
  cFcHistGfpInMBitErrHigh Counter32
  cFcHistGfpInTypeInvalid Counter32
  cFcHistGfpInTypeInvalidHigh Counter32
  cFcHistGfpInSBlkCRCErr Counter32
  cFcHistGfpInSBlkCRCErrHigh Counter32

CFcHistHCEntry  
SEQUENCE    
  cFcHistInvalidOrdSetsHC Counter64
  cFcHistEncodingDispErrHC Counter64
  cFcHistInTotalErrHC Counter64
  cFcHistInFramesTruncHC Counter64
  cFcHistInFramesTooLongHC Counter64
  cFcHistInFramesBadCRCHC Counter64
  cFcHistInFramesHC Counter64
  cFcHistInElementsHC Counter64
  cFcHistInDiscardsHC Counter64
  cFcHistOutFramesBadCRCHC Counter64
  cFcHistOutFramesHC Counter64
  cFcHistOutElementsHC Counter64
  cFcHistOutDiscardsHC Counter64
  cFcHistLinkResetsHC Counter64
  cFcHistGfpInSBitErrHC Counter64
  cFcHistGfpInMBitErrHC Counter64
  cFcHistGfpInTypeInvalidHC Counter64
  cFcHistGfpInSBlkCRCErrHC Counter64

CFcAlarmEntry  
SEQUENCE    
  cFcAlarmIndex INTEGER
  cFcAlarmInterval INTEGER
  cFcAlarmVariable OBJECT IDENTIFIER
  cFcAlarmSampleType INTEGER
  cFcAlarmValue Counter32
  cFcAlarmValueHigh Counter32
  cFcAlarmStartupAlarm INTEGER
  cFcAlarmRisingThreshold Integer32
  cFcAlarmRisingThresholdHigh Integer32
  cFcAlarmFallingThreshold Integer32
  cFcAlarmFallingThresholdHigh Integer32
  cFcAlarmStatus INTEGER

Defined Values

cerentFcMIB 1.3.6.1.4.1.3607.1.10.100
This MIB module defines the managed objects for performance monitoring of supported Fibre Channel interfaces.
MODULE-IDENTITY    

cerentFcMIBObjects 1.3.6.1.4.1.3607.2.60
OBJECT IDENTIFIER    

cerentFc 1.3.6.1.4.1.3607.2.60.1
OBJECT IDENTIFIER    

cFcStatsTable 1.3.6.1.4.1.3607.2.60.1.1
This table reports the current values of the Fibre channel stats on the supported interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    CFcStatsEntry

cFcStatsEntry 1.3.6.1.4.1.3607.2.60.1.1.1
A collection of Fibre Channel statisctics on an interface.
OBJECT-TYPE    
  CFcStatsEntry  

cFcStatsInvalidOrdSets 1.3.6.1.4.1.3607.2.60.1.1.1.10
This object gives the number of invalid ordered sets encountered on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInvalidOrdSetsHigh. SNMP v2c or v3 managers can directly use cFcStatsInvalidOrdSetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInvalidOrdSetsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.20
This object gives the higher word value the number of invalid ordered sets on the particular interface. If the value of cFcStatsInvalidOrdSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInvalidOrdSetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsEncodingDispErr 1.3.6.1.4.1.3607.2.60.1.1.1.30
This object gives the number of encoding disparity errors encountered on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsEncodingDispErrHigh. SNMP v2c or v3 managers can directly use cFcStatsEncodingDispErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsEncodingDispErrHigh 1.3.6.1.4.1.3607.2.60.1.1.1.40
This object gives the higher word value the number of encoding disparity errors on the particular interface. If the value of cFcStatsEncodingDispErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsEncodingDispErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInTotalErr 1.3.6.1.4.1.3607.2.60.1.1.1.50
This object gives the value of the total number of errors encountered on the particular interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInTotalErrHigh. SNMP v2c or v3 managers can directly use cFcStatsInTotalErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInTotalErrHigh 1.3.6.1.4.1.3607.2.60.1.1.1.60
This object gives the higher word value the total number of errors encountered on the particular interface. If the value of cFcStatsInTotalErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInTotalErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesTrunc 1.3.6.1.4.1.3607.2.60.1.1.1.70
This object gives the value of the number of fibre channel truncated frames received on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInFramesTruncHigh. SNMP v2c or v3 managers can directly use cFcStatsInFramesTruncHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesTruncHigh 1.3.6.1.4.1.3607.2.60.1.1.1.80
This object gives the higher word value the number of fibre channel truncated frames received on this interface. If the value of cFcStatsInFramesTrunc is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInFramesTruncHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesTooLong 1.3.6.1.4.1.3607.2.60.1.1.1.90
This object gives the number of fibre channel frames received on this interface with a length greater than what was agreed to. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInFramesTooLongHigh. SNMP v2c or v3 managers can directly use cFcStatsInFramesTooLongHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesTooLongHigh 1.3.6.1.4.1.3607.2.60.1.1.1.100
This object gives the higher word value the number of fibre channel frames received on this interface with a length greater than what was agreed to. If the value of cFcStatsInFramesTooLong is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInFramesTooLongHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesBadCRC 1.3.6.1.4.1.3607.2.60.1.1.1.110
The counter associated with the number of frames received with invalid CRC, on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInFramesBadCRCHigh. SNMP v2c or v3 managers can directly use cFcStatsInFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesBadCRCHigh 1.3.6.1.4.1.3607.2.60.1.1.1.120
This object gives the higher word value of the number of frames received with invalid CRC, on this interface. If the value of cFcStatsInFramesBadCRC is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInFramesBadCRCHigh, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFrames 1.3.6.1.4.1.3607.2.60.1.1.1.130
The counter associated with the number of fibre channel frames received on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInFramesHigh. SNMP v2c or v3 managers can directly use cFcStatsInFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInFramesHigh 1.3.6.1.4.1.3607.2.60.1.1.1.140
This object gives the higher word value the number of fibre channel frames received on this interface. If the value of cFcStatsInFrames is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInElements 1.3.6.1.4.1.3607.2.60.1.1.1.150
This object gives the value of the number of received bytes on the particular interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInElementsHigh. SNMP v2c or v3 managers can directly use cFcStatsInElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInElementsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.160
This object gives the higher word value the number of received bytes on the particular interface. If the value of cFcStatsInElements is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInDiscards 1.3.6.1.4.1.3607.2.60.1.1.1.170
This object gives the value of the number of received frames on this interface that were discarded. This object only shows the lower word value of the counter.The high word value is given by cFcStatsInDiscardsHigh. SNMP v2c or v3 managers can directly use cFcStatsInDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsInDiscardsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.180
This object gives the higher word value the number of received frames discarded on the particular interface. If the value of cFcStatsInDiscards is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsInDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutFramesBadCRC 1.3.6.1.4.1.3607.2.60.1.1.1.190
This object gives the number of frames transmitted with invalid CRC, on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsOutFramesBadCRCHigh. SNMP v2c or v3 managers can directly use cFcStatsOutFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutFramesBadCRCHigh 1.3.6.1.4.1.3607.2.60.1.1.1.200
This object gives the higher word value the number of frames transmitted with invalid CRC, on this interface. If the value of cFcStatsOutFramesBadCRC is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsOutFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutFrames 1.3.6.1.4.1.3607.2.60.1.1.1.210
This object gives the number of fibre channel frames transmitted on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsOutFramesHigh. SNMP v2c or v3 managers can directly use cFcStatsOutFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutFramesHigh 1.3.6.1.4.1.3607.2.60.1.1.1.220
This object gives the higher word value of the number of fibre channel frames transmitted on this interface. If the value of cFcStatsOutFrames is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsOutFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutElements 1.3.6.1.4.1.3607.2.60.1.1.1.230
This object gives the value of the number of trasmitted bytes on the particular interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsOutElementsHigh. SNMP v2c or v3 managers can directly use cFcStatsOutElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutElementsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.240
This object gives the higher word value the number of transmitted bytes on the particular interface. If the value of cFcStatsOutElements is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsOutElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutDiscards 1.3.6.1.4.1.3607.2.60.1.1.1.250
This object gives the number of transmitted frames on this interface that were discarded. This object only shows the lower word value of the counter.The high word value is given by cFcStatsOutDiscardsHigh. SNMP v2c or v3 managers can directly use cFcStatsOutDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsOutDiscardsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.260
This object gives the higher word value of the number of transmitted frames on this interface that were discarded. If the value of cFcStatsOutDiscards is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsOutDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsLinkResets 1.3.6.1.4.1.3607.2.60.1.1.1.270
This object gives the value of the number of link resets detected on this particular interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsLinkResetsHigh. SNMP v2c or v3 managers can directly use cFcStatsLinkResetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsLinkResetsHigh 1.3.6.1.4.1.3607.2.60.1.1.1.280
This object gives the higher word value the number of link resets detected on the particular interface. If the value of cFcStatsLinkResets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsLinkResetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInSBitErr 1.3.6.1.4.1.3607.2.60.1.1.1.290
This object gives the value of the number of single bit GFP errors received on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsGfpInSBitErrHigh. SNMP v2c or v3 managers can directly use cFcStatsGfpInSBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInSBitErrHigh 1.3.6.1.4.1.3607.2.60.1.1.1.300
This object gives the higher word value the number of single bit GFP errors received on this interface. If the value of cFcStatsGfpInSBitErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsGfpInSBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInMBitErr 1.3.6.1.4.1.3607.2.60.1.1.1.310
This object gives the value of the number of multi bit GFP errors received on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsGfpInMBitErrHigh. SNMP v2c or v3 managers can directly use cFcStatsGfpInMBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInMBitErrHigh 1.3.6.1.4.1.3607.2.60.1.1.1.320
This object gives the higher word value the number of multi bit GFP errors received on this interface. If the value of cFcStatsGfpInMBitErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsGfpInMBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInTypeInvalid 1.3.6.1.4.1.3607.2.60.1.1.1.330
This object gives the value of the number of GFP frames received on this interface with an invalid type. This object only shows the lower word value of the counter.The high word value is given by cFcStatsGfpInTypeInvalidHigh. SNMP v2c or v3 managers can directly use cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInTypeInvalidHigh 1.3.6.1.4.1.3607.2.60.1.1.1.340
This object gives the higher word value of the number of GFP frames received on this interface with an invalid type. If the value of cFcStatsGfpInTypeInvalid is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInSBlkCRCErr 1.3.6.1.4.1.3607.2.60.1.1.1.350
This object gives the value of the number of GFP super block CRC errors received on this interface. This object only shows the lower word value of the counter.The high word value is given by cFcStatsGfpInSblkCRCErrHigh. SNMP v2c or v3 managers can directly use cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsGfpInSBlkCRCErrHigh 1.3.6.1.4.1.3607.2.60.1.1.1.360
This object gives the higher word value the number of GFP super block CRC errors received on the particular interface. If the value of cFcStatsGfpInSblkCRCErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcStatsHCTable 1.3.6.1.4.1.3607.2.60.1.2
This table reports GFP stats on supported Fibre Channel interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    CFcStatsHCEntry

cFcStatsHCEntry 1.3.6.1.4.1.3607.2.60.1.2.1
A collection of Fibre channel statisctics on an interface. All the counters in this table are 64 bits counters and are useful only to SNMP v2 and v3 managers.
OBJECT-TYPE    
  CFcStatsHCEntry  

cFcStatsInvalidOrdSetsHC 1.3.6.1.4.1.3607.2.60.1.2.1.10
The counter associated with the number of invalid ordered sets encountered on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsEncodingDispErrHC 1.3.6.1.4.1.3607.2.60.1.2.1.20
The counter associated with the number of encoding disparity errors encountered on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInTotalErrHC 1.3.6.1.4.1.3607.2.60.1.2.1.30
The counter associated with the total number of errors encountered on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInFramesTruncHC 1.3.6.1.4.1.3607.2.60.1.2.1.40
The counter associated with the number of fibre channel truncated frames received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInFramesTooLongHC 1.3.6.1.4.1.3607.2.60.1.2.1.50
The counter associated with the number of fibre channel frames received with a length greater than what was agreed to on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInFramesBadCRCHC 1.3.6.1.4.1.3607.2.60.1.2.1.60
The counter associated with the number of frames received with invalid CRC, on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInFramesHC 1.3.6.1.4.1.3607.2.60.1.2.1.70
The counter associated with the number of fibre channel frames received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInElementsHC 1.3.6.1.4.1.3607.2.60.1.2.1.80
The counter associated with the number of bytes received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsInDiscardsHC 1.3.6.1.4.1.3607.2.60.1.2.1.90
The counter associated with the number of received frames discarded on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsOutFramesBadCRCHC 1.3.6.1.4.1.3607.2.60.1.2.1.100
The counter associated with the number of transmitted frames with invalid CRC, on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsOutFramesHC 1.3.6.1.4.1.3607.2.60.1.2.1.110
The counter associated with the number of fibre channel frames transmitted on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsOutElementsHC 1.3.6.1.4.1.3607.2.60.1.2.1.120
The counter associated with the number of bytes transmitted on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsOutDiscardsHC 1.3.6.1.4.1.3607.2.60.1.2.1.130
The counter associated with the number of transmitted frames on this interface that were discarded. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsLinkResetsHC 1.3.6.1.4.1.3607.2.60.1.2.1.140
The counter associated with the number of link resets detected on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsGfpInSBitErrHC 1.3.6.1.4.1.3607.2.60.1.2.1.150
The counter associated with the number of single bit GFP errors received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsGfpInMBitErrHC 1.3.6.1.4.1.3607.2.60.1.2.1.160
The counter associated with the number of multi bit GFP errors received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsGfpInTypeInvalidHC 1.3.6.1.4.1.3607.2.60.1.2.1.170
The counter associated with the number of GFP frames received on this interface with an invalid type. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcStatsGfpInSBlkCRCErrHC 1.3.6.1.4.1.3607.2.60.1.2.1.180
The counter associated with the number of GFP super block CRC errors received on this interface. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistTable 1.3.6.1.4.1.3607.2.60.1.3
This table reports fibre channel stats on supported interfaces for previous intervals.
OBJECT-TYPE    
  SEQUENCE OF  
    CFcHistEntry

cFcHistEntry 1.3.6.1.4.1.3607.2.60.1.3.1
A collection of Fibre Channel stats history on an interface.
OBJECT-TYPE    
  CFcHistEntry  

cFcHistIntervalType 1.3.6.1.4.1.3607.2.60.1.3.1.10
This object specifies the type of interval for which the data is being obtained.
OBJECT-TYPE    
  CerentPeriod  

cFcHistIntervalNum 1.3.6.1.4.1.3607.2.60.1.3.1.20
This object gives the number of the particular interval for which the data is being obtained.
OBJECT-TYPE    
  INTEGER 1..65535  

cFcHistInvalidOrdSets 1.3.6.1.4.1.3607.2.60.1.3.1.30
This object gives the value of the number of invalid ordered sets on the particular interface during this sampling interval. This object only shows the lower word value of the counter. The high word value is given by cFcHistInvalidOrdSetsHigh. SNMP v2c or v3 managers can directly use cFcHistInvalidOrdSetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInvalidOrdSetsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.40
This object gives the higher word value the number of invalid ordered sets on the particular interface during this sampling interval. If the value of cFcHistInvalidOrdSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInvalidOrdSetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistEncodingDispErr 1.3.6.1.4.1.3607.2.60.1.3.1.50
This object gives the value of the number of encoding disparity errors on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistEncodingDispErrHigh. SNMP v2c or v3 managers can directly use cFcHistEncodingDispErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistEncodingDispErrHigh 1.3.6.1.4.1.3607.2.60.1.3.1.60
This object gives the higher word value the number of encoding disparity errors on the particular interface during this sampling interval. If the value of cFcHistEncodingDispErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistEncodingDispErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInTotalErr 1.3.6.1.4.1.3607.2.60.1.3.1.70
This object gives the total number of errors encountered on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInTotalErrHigh. SNMP v2c or v3 managers can directly use cFcHistInTotalErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInTotalErrHigh 1.3.6.1.4.1.3607.2.60.1.3.1.80
This object gives the higher word value of the total number of errors encountered on this interface during this sampling interval. If the value of cFcHistInTotalErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInTotalErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesTrunc 1.3.6.1.4.1.3607.2.60.1.3.1.90
This object gives the number of fibre channel truncated frames received on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInFramesTruncHigh. SNMP v2c or v3 managers can directly use cFcHistInFramesTruncHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesTruncHigh 1.3.6.1.4.1.3607.2.60.1.3.1.100
This object gives the higher word value the number of fibre channel truncated frames received on this interface during this sampling interval. If the value of cFcHistInFramesTrunc is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInFramesTruncHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesTooLong 1.3.6.1.4.1.3607.2.60.1.3.1.110
This object gives the value of the number of fibre channel frames received on this interface during this sampling interval with a length greater than what was agreed to. This object only shows the lower word value of the counter.The high word value is given by cFcHistInFramesTooLongHigh. SNMP v2c or v3 managers can directly use cFcHistInFramesTooLongHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesTooLongHigh 1.3.6.1.4.1.3607.2.60.1.3.1.120
This object gives the higher word value the number of fibre channel frames received on this interface during this sampling interval with a length greater than what was agreed to. If the value of cFcHistInFramesTooLong is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInFramesTooLongHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesBadCRC 1.3.6.1.4.1.3607.2.60.1.3.1.130
This object gives the value of the number of frames received with invalid CRC, on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInFramesBadCRCHigh. SNMP v2c or v3 managers can directly use cFcHistInFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesBadCRCHigh 1.3.6.1.4.1.3607.2.60.1.3.1.140
This object gives the higher word value the number of frames received with invalid CRC, on this interface during this sampling interval. If the value of cFcHistInFramesBadCRC is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInFramesBadCRCHigh, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFrames 1.3.6.1.4.1.3607.2.60.1.3.1.150
This object gives the value of the number of fibre channel frames received on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInFramesHigh. SNMP v2c or v3 managers can directly use cFcHistInFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInFramesHigh 1.3.6.1.4.1.3607.2.60.1.3.1.160
This object gives the higher word value the number of fibre channel frames received on this interface during this sampling interval. If the value of cFcHistInFrames is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInElements 1.3.6.1.4.1.3607.2.60.1.3.1.170
This object gives the value of the number of received bytes on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInElementsHigh. SNMP v2c or v3 managers can directly use cFcHistInElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInElementsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.180
This object gives the higher word value the number of received bytes on the particular interface during this sampling interval. If the value of cFcHistInElements is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInDiscards 1.3.6.1.4.1.3607.2.60.1.3.1.190
This object gives the the number of received frames discarded on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistInDiscardsHigh. SNMP v2c or v3 managers can directly use cFcHistInDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistInDiscardsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.200
This object gives the higher word value of the number of received frames discarded on this interface during this sampling interval. If the value of cFcHistInDiscards is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistInDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutFramesBadCRC 1.3.6.1.4.1.3607.2.60.1.3.1.210
This object gives the the number of frames transmitted with invalid CRC, on this interface, during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistOutFramesBadCRCHigh. SNMP v2c or v3 managers can directly use cFcHistOutFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutFramesBadCRCHigh 1.3.6.1.4.1.3607.2.60.1.3.1.220
This object gives the higher word value the number of frames transmitted with invalid CRC, on this interface, during this sampling interval. If the value of cFcHistOutFramesBadCRC is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistOutFramesBadCRCHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutFrames 1.3.6.1.4.1.3607.2.60.1.3.1.230
This object gives the value of the number of frames transmitted on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistOutFramesHigh. SNMP v2c or v3 managers can directly use cFcHistOutFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutFramesHigh 1.3.6.1.4.1.3607.2.60.1.3.1.240
This object gives the higher word value the number of frames transmitted on the particular interface during this sampling interval. If the value of cFcHistOutFrames is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistOutFramesHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutElements 1.3.6.1.4.1.3607.2.60.1.3.1.250
This object gives the value of the number of trasmitted bytes on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistOutElementsHigh. SNMP v2c or v3 managers can directly use cFcHistOutElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutElementsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.260
This object gives the higher word value of the number of transmitted bytes on the particular interface during this sampling interval. If the value of cFcHistOutElements is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistOutElementsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutDiscards 1.3.6.1.4.1.3607.2.60.1.3.1.270
This object gives the number of transmitted frames discarded on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistOutDiscardsHigh. SNMP v2c or v3 managers can directly use cFcHistOutDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistOutDiscardsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.280
This object gives the higher word value the number of transmitted frames discarded on this interface during this sampling interval. If the value of cFcHistOutDiscards is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistOutDiscardsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistLinkResets 1.3.6.1.4.1.3607.2.60.1.3.1.290
This object gives the value of the number of link resets detected on the particular interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistLinkResetsHigh. SNMP v2c or v3 managers can directly use cFcHistLinkResetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistLinkResetsHigh 1.3.6.1.4.1.3607.2.60.1.3.1.300
This object gives the higher word value the number of link resets detected on the particular interface during this interval. If the value of cFcHistLinkResets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistLinkResetsHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInSBitErr 1.3.6.1.4.1.3607.2.60.1.3.1.310
This object gives the number of single bit GFP errors received on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistGfpInSBitErrHigh. SNMP v2c or v3 managers can directly use cFcHistGfpInSBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInSBitErrHigh 1.3.6.1.4.1.3607.2.60.1.3.1.320
This object gives the higher word value of the number of single bit GFP errors received on this interface during this sampling interval. If the value of cFcHistGfpInSBitErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistGfpInSBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInMBitErr 1.3.6.1.4.1.3607.2.60.1.3.1.330
This object gives the number of multi bit GFP errors received on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistGfpInMBitErrHigh. SNMP v2c or v3 managers can directly use cFcHistGfpInMBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInMBitErrHigh 1.3.6.1.4.1.3607.2.60.1.3.1.340
This object gives the higher word value the number of multi bit GFP errors received on this interface during this sampling interval. If the value of cFcHistGfpInMBitErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistGfpInMBitErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInTypeInvalid 1.3.6.1.4.1.3607.2.60.1.3.1.350
This object gives the value of the number of received GFP frames with an invalid type on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistGfpInTypeInvalidHigh. SNMP v2c or v3 managers can directly use cFcHistGfpInTypeInvalidHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInTypeInvalidHigh 1.3.6.1.4.1.3607.2.60.1.3.1.360
This object gives the higher word value of the number of received GFP frames with an invalid type on this interface, during this sampling interval. If the value of cFcHistGfpInTypeInvalid is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistGfpInTypeInvalidHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInSBlkCRCErr 1.3.6.1.4.1.3607.2.60.1.3.1.370
This object gives the value of the number of super block CRC GFP errors received on this interface during this sampling interval. This object only shows the lower word value of the counter.The high word value is given by cFcHistGfpInSblkCRCErrHigh. SNMP v2c or v3 managers can directly use cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistGfpInSBlkCRCErrHigh 1.3.6.1.4.1.3607.2.60.1.3.1.380
This object gives the higher word value the number of super block CRC GFP errors received on this interface during this sampling interval. If the value of cFcHistGfpInSblkCRCErr is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter.
OBJECT-TYPE    
  Counter32  

cFcHistHCTable 1.3.6.1.4.1.3607.2.60.1.4
This table reports history of fibre channel stats on supported Fibre Channel interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    CFcHistHCEntry

cFcHistHCEntry 1.3.6.1.4.1.3607.2.60.1.4.1
A collection of history of Fibre channel statisctics on an interface. All the counters in this table are 64 bits counters and are useful only to SNMP v2 and v3 managers.
OBJECT-TYPE    
  CFcHistHCEntry  

cFcHistInvalidOrdSetsHC 1.3.6.1.4.1.3607.2.60.1.4.1.10
The counter associated with the number of invalid ordered sets encountered on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistEncodingDispErrHC 1.3.6.1.4.1.3607.2.60.1.4.1.20
The counter associated with the number of encoding disparity errors encountered on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInTotalErrHC 1.3.6.1.4.1.3607.2.60.1.4.1.30
The counter associated with the total number of errors encountered on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInFramesTruncHC 1.3.6.1.4.1.3607.2.60.1.4.1.40
The counter associated with the number of fibre channel truncated frames received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInFramesTooLongHC 1.3.6.1.4.1.3607.2.60.1.4.1.50
The counter associated with the number of fibre channel frames received on this interface during this sampling interval, with a length greater than what was agreed to. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInFramesBadCRCHC 1.3.6.1.4.1.3607.2.60.1.4.1.60
The counter associated with the number of frames received with an invalid CRC, on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInFramesHC 1.3.6.1.4.1.3607.2.60.1.4.1.70
The counter associated with the number of frames received on this interface, during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInElementsHC 1.3.6.1.4.1.3607.2.60.1.4.1.80
The counter associated with the number of bytes received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistInDiscardsHC 1.3.6.1.4.1.3607.2.60.1.4.1.90
The counter associated with the number of received frames discarded on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistOutFramesBadCRCHC 1.3.6.1.4.1.3607.2.60.1.4.1.100
The counter associated with the number of frames transmitted with an invalid CRC, on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistOutFramesHC 1.3.6.1.4.1.3607.2.60.1.4.1.110
The counter associated with the number of fibre channel frames transmitted on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistOutElementsHC 1.3.6.1.4.1.3607.2.60.1.4.1.120
The counter associated with the number of bytes received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistOutDiscardsHC 1.3.6.1.4.1.3607.2.60.1.4.1.130
The counter associated with the number of transmitted frames discarded on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistLinkResetsHC 1.3.6.1.4.1.3607.2.60.1.4.1.140
The counter associated with the number of link resets detected on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistGfpInSBitErrHC 1.3.6.1.4.1.3607.2.60.1.4.1.150
The counter associated with the number of single bit GFP errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistGfpInMBitErrHC 1.3.6.1.4.1.3607.2.60.1.4.1.160
The counter associated with the number of multi bit GFP errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistGfpInTypeInvalidHC 1.3.6.1.4.1.3607.2.60.1.4.1.170
The counter associated with the number of GFP frames with invalid type received on this interface, during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcHistGfpInSBlkCRCErrHC 1.3.6.1.4.1.3607.2.60.1.4.1.180
The counter associated with the number of GFP super block CRC errors received on this interface during this sampling interval. This is a High Capacity ( 64 bit ) counter.
OBJECT-TYPE    
  Counter64  

cFcAlarmTable 1.3.6.1.4.1.3607.2.60.1.5
A list of cFcAlarm entries.
OBJECT-TYPE    
  SEQUENCE OF  
    CFcAlarmEntry

cFcAlarmEntry 1.3.6.1.4.1.3607.2.60.1.5.1
A list of parameters that set up a periodic checking for cFcAlarm conditions.
OBJECT-TYPE    
  CFcAlarmEntry  

cFcAlarmIndex 1.3.6.1.4.1.3607.2.60.1.5.1.10
An index that uniquely identifies an entry in the cFcAlarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
OBJECT-TYPE    
  INTEGER 1..65535  

cFcAlarmInterval 1.3.6.1.4.1.3607.2.60.1.5.1.20
The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in the case of deltaValue sampling - the interval should be set short enough that the sampled variable is very unlikely to increase or decrease by more than 2^31 - 1 during a single sampling interval.
OBJECT-TYPE    
  INTEGER 1..8000  

cFcAlarmVariable 1.3.6.1.4.1.3607.2.60.1.5.1.30
The object identifier of the particular variable to be sampled.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

cFcAlarmSampleType 1.3.6.1.4.1.3607.2.60.1.5.1.40
The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of the sampling interval. If the value of this object is deltaValue(2), the value of the selected variable at the last sample will be subtracted from the current value, and the difference compared with the thresholds.
OBJECT-TYPE    
  INTEGER absoluteValue(1), deltaValue(2)  

cFcAlarmValue 1.3.6.1.4.1.3607.2.60.1.5.1.50
The value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the samples at the beginning and end of the period. If the sample type is absoluteValue, this value will be the sampled value at the end of the period. This is the value that is compared with the rising and falling thresholds. This object only shows the lower word value. The high word value is given by cFcAlarmValueHigh. The value during the current sampling period is not made available until the period is completed and will remain available until the next period completes.
OBJECT-TYPE    
  Counter32  

cFcAlarmValueHigh 1.3.6.1.4.1.3607.2.60.1.5.1.60
The higher word value of the statistic during the last sampling period. If the value of cFcAlarmValue is greater than 4,294,967,295, the higher word value will be stored in this object.
OBJECT-TYPE    
  Counter32  

cFcAlarmStartupAlarm 1.3.6.1.4.1.3607.2.60.1.5.1.70
The cFcAlarm that may be sent when this entry is set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and cFcAlarmStartupAlarm is equal to risingcFcAlarm(1) or risingOrFallingAlarm(3), then a single rising cFcAlarm will be generated. If the sample after this entry becomes valid is less than or equal to the fallingThreshold and cFcAlarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingcFcAlarm(3), then a single falling alarm will be generated.
OBJECT-TYPE    
  INTEGER risingcFcAlarm(1), fallingcFcAlarm(2), risingOrFallingcFcAlarm(3)  

cFcAlarmRisingThreshold 1.3.6.1.4.1.3607.2.60.1.5.1.80
A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is greater than or equal to this threshold and the associated cFcAlarmStartupAlarm is equal to risingcFcAlarm(1) or risingOrFallingAlarm(3). After a rising event is generated, another such event will not be generated until the sampled value falls below this threshold and reaches the cFcAlarmFallingThreshold. This object can only be used to set the lower word value of the threshold. If the threshold to be set is greater than 4,294,967,295 then cFcAlarmRisingThresholdHigh should be used to set the upper word value of the threshold.
OBJECT-TYPE    
  Integer32  

cFcAlarmRisingThresholdHigh 1.3.6.1.4.1.3607.2.60.1.5.1.90
The upper word value of the rising threshold for the sampled statistic. If the value of threshold to be set in cFcAlarmRisingThreshold is greater than 4,294,967,295, then this object should be used to set the upper word value of the threshold.
OBJECT-TYPE    
  Integer32  

cFcAlarmFallingThreshold 1.3.6.1.4.1.3607.2.60.1.5.1.100
A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be generated if the first sample after this entry becomes valid is less than or equal to this threshold and the associated cFcAlarmStartupAlarm is equal to fallingcFcAlarm(2) or risingOrFallingAlarm(3). After a falling event is generated, another such event will not be generated until the sampled value rises above this threshold and reaches the cFcAlarmRisingThreshold. This object can only be used to set the lower word value of the threshold. If the threshold to be set is greater than 4,294,967,295, then cFcAlarmFallingThresholdHigh should be used to set the upper word value of the threshold.
OBJECT-TYPE    
  Integer32  

cFcAlarmFallingThresholdHigh 1.3.6.1.4.1.3607.2.60.1.5.1.110
The upper word value of the falling threshold for the sampled statistic. If the value of threshold to be set in cFcAlarmFallingThreshold is greater than 4,294,967,295, then this object should be used to set the upper word value of the threshold.
OBJECT-TYPE    
  Integer32  

cFcAlarmStatus 1.3.6.1.4.1.3607.2.60.1.5.1.120
The status of this cFcAlarm entry.
OBJECT-TYPE    
  INTEGER valid(1), createRequest(2), underCreation(3), invalid(4)  

cerentFcMIBConformance 1.3.6.1.4.1.3607.5.40
OBJECT IDENTIFIER    

cerentFcMIBCompliances 1.3.6.1.4.1.3607.5.40.1
OBJECT IDENTIFIER    

cerentFcMIBGroups 1.3.6.1.4.1.3607.5.40.2
OBJECT IDENTIFIER    

cerentFcMIBCompliance 1.3.6.1.4.1.3607.5.40.1.1
The compliance statement for platforms that monitor the Fibre channel interfaces with respect to error counters, for the physical layer.
MODULE-COMPLIANCE    

cerentFcStatsGroup 1.3.6.1.4.1.3607.5.40.2.1
The collection of objects to give stats related to the performance of an fibre channel interface.
OBJECT-GROUP    

cerentFcHistGroup 1.3.6.1.4.1.3607.5.40.2.2
The collection of objects to give previous stats related to the performance of an fibre channel interface.
OBJECT-GROUP    

cerentFcStatsHCGroup 1.3.6.1.4.1.3607.5.40.2.3
The collection of 64 bit objects to give stats related to the performance of an fibre channel interface.
OBJECT-GROUP    

cerentFcHistHCGroup 1.3.6.1.4.1.3607.5.40.2.4
The collection of 64 bit objects to give previous stats related to the performance of an fibre channel interface.
OBJECT-GROUP    

cerentFcAlarmGroup 1.3.6.1.4.1.3607.5.40.2.5
The collection of alarm thresholds configured on fibre channel interfaces.
OBJECT-GROUP