CAT2600-MIB

File: CAT2600-MIB.mib (66005 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

TimeTicks IpAddress Counter
enterprises OBJECT-TYPE DisplayString

Defined Types

MacAddr  
OCTET STRING Size(6)    

Cat2600TsTrapRcvrEntry  
SEQUENCE    
  cat2600TsTrapRcvrIndex INTEGER
  cat2600TsTrapRcvrStatus INTEGER
  cat2600TsTrapRcvrIpAddress IpAddress
  cat2600TsTrapRcvrComm DisplayString
  cat2600TsTrapRcvrDmns OCTET STRING

Cat2600TsPortEntry  
SEQUENCE    
  cat2600TsPortIndex INTEGER
  cat2600TsPortRcvLocalFrames Counter
  cat2600TsPortForwardedFrames Counter
  cat2600TsPortMostStations Counter
  cat2600TsPortMaxStations Counter
  cat2600TsPortSWHandledFrames Counter
  cat2600TsPortLocalStations Counter
  cat2600TsPortRemoteStations Counter
  cat2600TsPortUnknownStaFrames Counter
  cat2600TsPortResetStats INTEGER
  cat2600TsPortResetTimer TimeTicks
  cat2600TsPortResetAddrs INTEGER
  cat2600TsPortRcvBcasts Counter
  cat2600TsPortSwitchedFrames Counter
  cat2600TsPortLinkState INTEGER
  cat2600TsPortHashOverflows Counter
  cat2600TsPortAddrAgingTime INTEGER
  cat2600TsPortSwitchMode INTEGER
  cat2600TsPortFixedCfg INTEGER
  cat2600TsPortMode INTEGER
  cat2600TsPortDuplex INTEGER
  cat2600TsPortCfgLoss INTEGER
  cat2600TsPortCfgLossRC INTEGER
  cat2600TsPortCRCCount Counter
  cat2600TsPortHPChannelFrames Counter
  cat2600TsPortLPChannelFrames Counter
  cat2600TsPortHPThreshold INTEGER
  cat2600TsPortCfgRingSpeed INTEGER
  cat2600TsPortCfgRSA INTEGER
  cat2600TsPortDomain INTEGER
  cat2600TsPortCfgLossThreshold INTEGER
  cat2600TsPortCfgLossSamplingPeriod INTEGER
  cat2600TsPortBeaconStationAddress MacAddr
  cat2600TsPortBeaconNAUN MacAddr
  cat2600TsPortBeaconType INTEGER

Cat2600TsPortStnEntry  
SEQUENCE    
  cat2600TsPortStnPortNum INTEGER
  cat2600TsPortStnAddress MacAddr
  cat2600TsPortStnLocation INTEGER
  cat2600TsPortStnSrcFrames Counter
  cat2600TsPortStnSrcBytes Counter
  cat2600TsPortStnDestnFrames Counter
  cat2600TsPortStnDestnBytes Counter

Cat2600TsOptPortStaEntry  
SEQUENCE    
  cat2600TsOptPortStaPos INTEGER
  cat2600TsOptPortStaVal OCTET STRING

Cat2600TsDmnEntry  
SEQUENCE    
  cat2600TsDmnIndex INTEGER
  cat2600TsDmnPorts OCTET STRING
  cat2600TsDmnIpState INTEGER
  cat2600TsDmnIpAddress IpAddress
  cat2600TsDmnIpSubnetMask IpAddress
  cat2600TsDmnIpDefaultGateway IpAddress
  cat2600TsDmnStp INTEGER
  cat2600TsDmnName DisplayString
  cat2600TsDmnIfIndex INTEGER
  cat2600TsDmnBaseBridgeAddr MacAddr
  cat2600TsDmnNumStations INTEGER
  cat2600TsDmnMostStations INTEGER

Cat2600TsDmnStationEntry  
SEQUENCE    
  cat2600TsDmnStationDmnIndex INTEGER
  cat2600TsDmnStationAddress OCTET STRING
  cat2600TsDmnStationPort INTEGER
  cat2600TsDmnStationTraffic OCTET STRING

Cat2600TsOptDmnStaEntry  
SEQUENCE    
  cat2600TsOptDmnStaPos INTEGER
  cat2600TsOptDmnStaVal OCTET STRING

Cat2600TsPipeEntry  
SEQUENCE    
  cat2600TsPipeNumber INTEGER
  cat2600TsPipePorts OCTET STRING

Cat2600TsFilterEntry  
SEQUENCE    
  cat2600TsFilterStationAddress MacAddr
  cat2600TsFilterType INTEGER
  cat2600TsFilterStatus INTEGER
  cat2600TsFilterPorts OCTET STRING
  cat2600TsFilterMask OCTET STRING

Cat2600TsUFCEntry  
SEQUENCE    
  cat2600TsUFCSlotNum INTEGER
  cat2600TsUFCNumPhysIfs INTEGER
  cat2600TsUFCManufacturer DisplayString
  cat2600TsUFCType OCTET STRING
  cat2600TsUFCTypeDesc DisplayString
  cat2600TsUFCHwVer DisplayString
  cat2600TsUFCFwVer DisplayString
  cat2600TsUFCStatus INTEGER
  cat2600TsUFCReset INTEGER

Defined Values

cisco 1.3.6.1.4.1.9
OBJECT IDENTIFIER    

catProd 1.3.6.1.4.1.9.1
OBJECT IDENTIFIER    

cat2600 1.3.6.1.4.1.9.1.111
OBJECT IDENTIFIER    

cat2600Ts 1.3.6.1.4.1.9.1.111.1
OBJECT IDENTIFIER    

cat2600TsObjectID 1.3.6.1.4.1.9.1.111.1.1
OBJECT IDENTIFIER    

cat2600TsObjects 1.3.6.1.4.1.9.1.111.1.2
OBJECT IDENTIFIER    

dtrMIBs 1.3.6.1.4.1.9.1.111.1.3
OBJECT IDENTIFIER    

dtrConcMIB 1.3.6.1.4.1.9.1.111.1.3.1
OBJECT IDENTIFIER    

dtrMacMIB 1.3.6.1.4.1.9.1.111.1.3.2
OBJECT IDENTIFIER    

cat2600TsMain 1.3.6.1.4.1.9.1.111.1.2.1
OBJECT IDENTIFIER    

cat2600TsConfig 1.3.6.1.4.1.9.1.111.1.2.1.1
OBJECT IDENTIFIER    

cat2600TsSys 1.3.6.1.4.1.9.1.111.1.2.1.2
OBJECT IDENTIFIER    

cat2600TsPort 1.3.6.1.4.1.9.1.111.1.2.2
OBJECT IDENTIFIER    

cat2600TsDmns 1.3.6.1.4.1.9.1.111.1.2.3
OBJECT IDENTIFIER    

cat2600TsPipe 1.3.6.1.4.1.9.1.111.1.2.4
OBJECT IDENTIFIER    

cat2600TsFilter 1.3.6.1.4.1.9.1.111.1.2.5
OBJECT IDENTIFIER    

cat2600TsUFC 1.3.6.1.4.1.9.1.111.1.2.6
OBJECT IDENTIFIER    

cat2600TsSysObjectID 1.3.6.1.4.1.9.1.111.1.1.1
OBJECT IDENTIFIER    

cat2600TsFwVer 1.3.6.1.4.1.9.1.111.1.2.1.1.1
The firmware version in the form major.minor. For port microcode (SOLO) version information see the mgmt.mib-2.interfaces.ifTable.ifEntry.ifDescr object.
OBJECT-TYPE    
  DisplayString Size(1..64)  

cat2600TsHwVer 1.3.6.1.4.1.9.1.111.1.2.1.1.2
The hardware version in the form major.minor.
OBJECT-TYPE    
  DisplayString Size(1..64)  

cat2600TsSerialNumber 1.3.6.1.4.1.9.1.111.1.2.1.1.3
System serial number.
OBJECT-TYPE    
  DisplayString Size(16)  

cat2600TsInstallationDate 1.3.6.1.4.1.9.1.111.1.2.1.1.4
Firmware installation date. This date is initially set by the Network Management station. Each time the NV RAM is cleared through the console this date needs to be set by the management station. This should be in the format YYYY MM DD HH MM SS.
OBJECT-TYPE    
  DisplayString Size(64)  

cat2600TsFwSize 1.3.6.1.4.1.9.1.111.1.2.1.1.5
Size in bytes of the binary firmware image.
OBJECT-TYPE    
  INTEGER  

cat2600TsFwCRC 1.3.6.1.4.1.9.1.111.1.2.1.1.6
Firmware binary image CRC value.
OBJECT-TYPE    
  INTEGER  

cat2600TsFwManufacturer 1.3.6.1.4.1.9.1.111.1.2.1.1.7
Firmware manufacturer.
OBJECT-TYPE    
  DisplayString Size(16)  

cat2600TsIpAddr 1.3.6.1.4.1.9.1.111.1.2.1.1.8
IP address of the switch. Changes to this object take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsNetMask 1.3.6.1.4.1.9.1.111.1.2.1.1.9
IP subnet mask of the switch. Changes to this object take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsDefaultGateway 1.3.6.1.4.1.9.1.111.1.2.1.1.10
IP default gateway used by the switch. Changes to this object take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsTrapRcvrTable 1.3.6.1.4.1.9.1.111.1.2.1.1.14
A table of managers to which to send traps. Entries in the table are saved across resets and power cycles.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsTrapRcvrEntry

cat2600TsTrapRcvrEntry 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1
Definition of rows in the trap receiver table. The column cat2600TsTrapRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects cat2600TsTrapRcvrStatus, cat2600TsTrapRcvrIpAddress, and cat2600TsTrapRcvrComm.
OBJECT-TYPE    
  Cat2600TsTrapRcvrEntry  

cat2600TsTrapRcvrIndex 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.1
The index of the row in the table.
OBJECT-TYPE    
  INTEGER 1..65535  

cat2600TsTrapRcvrStatus 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.2
Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to create(4) causes a new row to be created if the row does not already exist. To create a new row set cat2600TsTrapRcvrStatus to create(4) and cat2600TsTrapRcvrIndex to the next available index ( cat2600TsTrapRcvrNext ). After successful creation of the new row, you can then set the desired values for cat2600TsTrapRcvrIpAddress and cat2600TsTrapRcvrComm. The value returned on GETs should be valid(2) or other(1), which is used to indicate any other condition.
OBJECT-TYPE    
  INTEGER other(1), valid(2), invalid(3), create(4)  

cat2600TsTrapRcvrIpAddress 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.3
IP address for an SNMP manager that is to receive the trap.
OBJECT-TYPE    
  IpAddress  

cat2600TsTrapRcvrComm 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.4
Community string to use.
OBJECT-TYPE    
  DisplayString Size(0..32)  

cat2600TsTrapRcvrDmns 1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.5
Domains on which traps to this target are sent. Each octet within the value of this object specifies a set of eight domains, with the first octet specifying domains 0 through 7, the second octet specifying domains 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered domain, and the least significant bit represents the highest numbered domain. Thus, each domain is represented by a single bit within the value of this object. If that bit has a value of '1' then that domain is included in the set of ports which will receive the trap; the domain is not included if its bit has a value of '0'.
OBJECT-TYPE    
  OCTET STRING Size(8)  

cat2600TsPingInterval 1.3.6.1.4.1.9.1.111.1.2.1.1.19
This variable specifies the interval in seconds of sending ICMP Echo Requests to the default gateway. No PING packets will be sent if the value is set to 0. The default interval is 10 minutes.
OBJECT-TYPE    
  INTEGER  

cat2600TsTapPort 1.3.6.1.4.1.9.1.111.1.2.1.1.20
Select the port to monitor traffic.
OBJECT-TYPE    
  INTEGER  

cat2600TsTapMonitoredPort 1.3.6.1.4.1.9.1.111.1.2.1.1.21
Allows the selection of the port that will be monitored by the port selected by cat2600TsTapPort.
OBJECT-TYPE    
  INTEGER  

cat2600TsCrcThresholdHi 1.3.6.1.4.1.9.1.111.1.2.1.1.22
Threshold for the switch to change to store and forward mode. A change in mode also generates a trap.
OBJECT-TYPE    
  INTEGER  

cat2600TsCrcThresholdLow 1.3.6.1.4.1.9.1.111.1.2.1.1.23
Threshold for the switch to change to store and forward mode. A change in mode also generates a trap.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortSwitchModeChangeTrapEnable 1.3.6.1.4.1.9.1.111.1.2.1.1.24
Enable or disable the trap sent out when the switching mode changes from cut-through to store and forward.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

cat2600TsTrendThreshold 1.3.6.1.4.1.9.1.111.1.2.1.1.25
Based on trend calculation of the Dynamic Cut State algorithm, when this value is exceeded the port changes from cut-through to store and forward mode. The default value for this object is 8 events. The valid range is 1-100.
OBJECT-TYPE    
  INTEGER  

cat2600TsSamplingPeriod 1.3.6.1.4.1.9.1.111.1.2.1.1.26
Sampling period in minutes for determining if the error rate of CRC errors has been exceeded. The default value for this object is 10 minutes. The valid range is 1-120.
OBJECT-TYPE    
  INTEGER 1..120  

cat2600TsNumberUFC 1.3.6.1.4.1.9.1.111.1.2.1.1.27
The number of UFCs installed in the switch. A value of zero (or an SNMP error of NOSUCH) indicates there are NO UFCs installed in this switch. This value indicates the number of entries in the cat2600TsUFCTable.
OBJECT-TYPE    
  INTEGER  

cat2600TsNumPorts 1.3.6.1.4.1.9.1.111.1.2.1.2.1
The maximum number of physical ports on the switch. This value includes all base ports plus all ports on any UFC cards. It does not include internally defined Bridge Relay Function ports or the CPU 'interface'.
OBJECT-TYPE    
  INTEGER  

cat2600TsNumStations 1.3.6.1.4.1.9.1.111.1.2.1.2.2
Aggregate number of currently active stations (nodes) on all ports on the switch.
OBJECT-TYPE    
  INTEGER  

cat2600TsMostStations 1.3.6.1.4.1.9.1.111.1.2.1.2.3
Highest aggregate number of stations ever active on all ports at one time, since the last reset or power cycle. This includes the default MAC address entries from each port.
OBJECT-TYPE    
  INTEGER  

cat2600TsMaxStations 1.3.6.1.4.1.9.1.111.1.2.1.2.4
Highest aggregate number of stations which the switch can support simultaneously.
OBJECT-TYPE    
  INTEGER  

cat2600TsReset 1.3.6.1.4.1.9.1.111.1.2.1.2.5
This object is used to reset the switch. Writing softReset(3) causes the switch to reset the hardware, run quick diagnostics, clear all counters, start switching, issue a warmstart trap, and then be able to respond to SNMP requests. Writing hardReset(2) causes the switch to run power up diagnostics and then execute a soft reset. Note: all address tables are cleared in both cases. The administrative parameters from nonvolatile memory are used to initialize the operational parameters. The value returned on GETs should be running(1).
OBJECT-TYPE    
  INTEGER running(1), hardReset(2), softReset(3)  

cat2600TsNumResets 1.3.6.1.4.1.9.1.111.1.2.1.2.6
Number of soft resets the switch has executed since the last hard reset or power cycle. Soft resets are defined as writing softReset(3) to cat2600TsReset, pressing the front panel reset button, executing a soft reset from the console, or resets induced by the switch firmware.
OBJECT-TYPE    
  Counter  

cat2600TsAddrAgingTime 1.3.6.1.4.1.9.1.111.1.2.1.2.7
Number of minutes of inactivity before an address entity is aged out. A value of zero means no aging. Note: if an address shows up on another port, the original port to address assignment is automatically deleted. The value is saved across resets and power cycles. The default value for this object is 5 minutes.
OBJECT-TYPE    
  INTEGER 0..9999  

cat2600TsSysTemperature 1.3.6.1.4.1.9.1.111.1.2.1.2.11
Temperature condition of the system. A change in this value generates a TRAP.
OBJECT-TYPE    
  INTEGER normal(1), toohigh(2)  

cat2600TsInstalledMemory 1.3.6.1.4.1.9.1.111.1.2.1.2.12
Total amount of CPU memory installed (in megabytes).
OBJECT-TYPE    
  INTEGER  

cat2600TsSysCurTime 1.3.6.1.4.1.9.1.111.1.2.1.2.13
Current time at the switch. To set the time use the format yyyy mm dd hh mm ss. All fields are required.
OBJECT-TYPE    
  DisplayString Size(1..128)  

cat2600TsPortTable 1.3.6.1.4.1.9.1.111.1.2.2.1
A table of information about each port. The number of rows is given by cat2600TsNumPorts. (This value refers to PHYSICAL ports as opposed to internal logical CRF bridge ports.)
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsPortEntry

cat2600TsPortEntry 1.3.6.1.4.1.9.1.111.1.2.2.1.1
Definition of rows in the port table. The number of rows is determined by the hardware and is specified by the value of cat2600TsNumPorts. Rows can not be created or deleted via SNMP requests.
OBJECT-TYPE    
  Cat2600TsPortEntry  

cat2600TsPortIndex 1.3.6.1.4.1.9.1.111.1.2.2.1.1.1
The ifIndex value corresponding to each port entry. For TR interfaces, the TsPortIndex corresponds to the Port Number or POE Index.
OBJECT-TYPE    
  INTEGER 1..65535  

cat2600TsPortRcvLocalFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.2
Number of frames received where the destination is on this port.
OBJECT-TYPE    
  Counter  

cat2600TsPortForwardedFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.3
Number of frames received on this port and forwarded to another port or the system module for processing.
OBJECT-TYPE    
  Counter  

cat2600TsPortMostStations 1.3.6.1.4.1.9.1.111.1.2.2.1.1.4
Highest number of stations ever active at any time since the last reset of the switch as seen by this port. This includes the default MAC address entries for the port.
OBJECT-TYPE    
  Counter  

cat2600TsPortMaxStations 1.3.6.1.4.1.9.1.111.1.2.2.1.1.5
Maximum number of stations which the port can support simultaneously.
OBJECT-TYPE    
  Counter  

cat2600TsPortSWHandledFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.6
Number of Frames received on this port and delivered to the system module for processing.
OBJECT-TYPE    
  Counter  

cat2600TsPortLocalStations 1.3.6.1.4.1.9.1.111.1.2.2.1.1.7
Number of stations on this port's address table which belong to the segment attached to this port.
OBJECT-TYPE    
  Counter  

cat2600TsPortRemoteStations 1.3.6.1.4.1.9.1.111.1.2.2.1.1.8
Number of stations on this port's address table which belong to segments attached to other ports.
OBJECT-TYPE    
  Counter  

cat2600TsPortUnknownStaFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.9
Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in the port's forwarding table.
OBJECT-TYPE    
  Counter  

cat2600TsPortResetStats 1.3.6.1.4.1.9.1.111.1.2.2.1.1.10
Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of cat2600TsPortResetTimer is set to zero.
OBJECT-TYPE    
  INTEGER other(1), running(2), reset(3)  

cat2600TsPortResetTimer 1.3.6.1.4.1.9.1.111.1.2.2.1.1.11
Time (in 100th second ticks) since the port counters were reset.
OBJECT-TYPE    
  TimeTicks  

cat2600TsPortResetAddrs 1.3.6.1.4.1.9.1.111.1.2.2.1.1.12
Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting cat2600TsPortResetTimer to zero.
OBJECT-TYPE    
  INTEGER other(1), running(2), reset(3)  

cat2600TsPortRcvBcasts 1.3.6.1.4.1.9.1.111.1.2.2.1.1.13
Number of Broadcast Frames received on this port without errors.
OBJECT-TYPE    
  Counter  

cat2600TsPortSwitchedFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.14
Number of frames switched on this port
OBJECT-TYPE    
  Counter  

cat2600TsPortLinkState 1.3.6.1.4.1.9.1.111.1.2.2.1.1.15
Link state of the port.
OBJECT-TYPE    
  INTEGER up(1), down(2)  

cat2600TsPortHashOverflows 1.3.6.1.4.1.9.1.111.1.2.2.1.1.16
Number of times a hash bucket was full when trying to add an entry to the port address table.
OBJECT-TYPE    
  Counter  

cat2600TsPortAddrAgingTime 1.3.6.1.4.1.9.1.111.1.2.2.1.1.17
Port level address aging time.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortSwitchMode 1.3.6.1.4.1.9.1.111.1.2.2.1.1.18
Operational frame switching mode for the port. When in auto mode the port uses the Direct Cut algorithm to place the port in either cut-thru or store-and- forward mode. This object is equivalent to cPortProtocolCharFrameControlOption in the dtrMac MIB. However, this object defines an additional state -auto- not defined in that standard.
OBJECT-TYPE    
  INTEGER storeandforward(1), cutthru(2), auto(3)  

cat2600TsPortFixedCfg 1.3.6.1.4.1.9.1.111.1.2.2.1.1.19
Use fixed configuration or run auto detection to determine configuration.
OBJECT-TYPE    
  INTEGER auto-detect(1), fixed(2)  

cat2600TsPortMode 1.3.6.1.4.1.9.1.111.1.2.2.1.1.20
When read, this object indicates the Port Mode obtained by the auto-detect function. It is a valid read object only when TsPortFixedCfg is set to auto-detect(1) and TsPortLinkState indicates up(1). Write to this object when defining the Port Mode for a fixed configuration (TsPortFixedCfg set to fixed(2)). This object is equivalent to the dtrMac MIB object cPortProtocolCharOperationOption.
OBJECT-TYPE    
  INTEGER adapter(1), port(2)  

cat2600TsPortDuplex 1.3.6.1.4.1.9.1.111.1.2.2.1.1.21
Version 1 MIB When read, this object indicates the Port Duplex state obtained by the auto-detect function. This object is a valid read object any time that TSPortLinkState indicates up(1) or when TsPortFixedCfg indicates fixed(2). Write to this object when defining the Port Duplex state for a fixed configuration (TsPortFixedCfg set to fixed(2)). Version 2 MIB This object is related to the dtrMac MIB objects cPortProtocolCharCurrentAccessProtocol and cPortProtocolCharAccessProtcolMask as defined in the following table: TsPortLinkState | TsPortFixedCfg | TsPortDuplex equivalent to: | | down | auto | CPortProtocolCharAccess | | ProtocolMask = X'0003' | | down | fixed | CPortProtocolCharAccess | | ProtocolMask = X'0001' or | | = X'0002' | | up | auto | cPortProtocolCharCurrent | | AccessProtocol | | up | fixed | cPortProtocolCharCurrent | | AccessProtocol.
OBJECT-TYPE    
  INTEGER half-duplex(1), full-duplex(2)  

cat2600TsPortCfgLoss 1.3.6.1.4.1.9.1.111.1.2.2.1.1.22
Number of events as described in TsPortCfgLossRC after the port has completed the join process and then lost communication.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortCfgLossRC 1.3.6.1.4.1.9.1.111.1.2.2.1.1.23
Reason code describing the cause of configuration loss.
OBJECT-TYPE    
  INTEGER wire-fault(1), beacon-auto-removal(2), force-remove-macaddr(3), connection-lost(4), adapter-check(5), close-srb(6), fdx-protocol-failure(7)  

cat2600TsPortCRCCount 1.3.6.1.4.1.9.1.111.1.2.2.1.1.24
Number of frames received with CRC error. This object is equivalent to dot5StatsLineError and to the dtrMac MIB object txiStatsLineErrorCounter.
OBJECT-TYPE    
  Counter  

cat2600TsPortHPChannelFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.25
Number of frames sent to the high priority channel of the particular Token-Ring port.
OBJECT-TYPE    
  Counter  

cat2600TsPortLPChannelFrames 1.3.6.1.4.1.9.1.111.1.2.2.1.1.26
Number of frames sent to the low priority channel of the particular Token-Ring port.
OBJECT-TYPE    
  Counter  

cat2600TsPortHPThreshold 1.3.6.1.4.1.9.1.111.1.2.2.1.1.27
Priority level at which frames are sent to the High priority channel.
OBJECT-TYPE    
  INTEGER 0..6  

cat2600TsPortCfgRingSpeed 1.3.6.1.4.1.9.1.111.1.2.2.1.1.28
When read this object indicates the Port Ring Speed obtained by the RSA function. Write to this object when defining the Port Ring Speed for a fixed configuration (TsPortCfgRSA set to fixed(2)). When TsPortCfgRSA indicates fixed(2), this object is equivalent to the dtrMac MIB object cPortProtocolCharMediumRateOption and to dot5RingSpeed. Note that the syntax of these objects is different. For cPortProtocolCharMediumRateOption 1 indicates 4 Mb/s, while for TsPortCfgRingSpeed 1 indicates 16Mb/s. This object is a valid read object any time that TSPortLinkState indicates up(1)or when TsPortCfgRSA indicates fixed(2).
OBJECT-TYPE    
  INTEGER speed-16megabit(1), speed-4megabit(2)  

cat2600TsPortCfgRSA 1.3.6.1.4.1.9.1.111.1.2.2.1.1.29
User configured Ring Speed Adjust or fixed speed.
OBJECT-TYPE    
  INTEGER rsa(1), fixed(2)  

cat2600TsPortDomain 1.3.6.1.4.1.9.1.111.1.2.2.1.1.30
Domain that the port belongs to.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortCfgLossThreshold 1.3.6.1.4.1.9.1.111.1.2.2.1.1.31
Number of configuration loss events (described in TsPortCfgLossRC) during the sample period which, if exceeded, should cause the port to be disabled. If the port is disabled by this function the port must be manually re-enabled.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortCfgLossSamplingPeriod 1.3.6.1.4.1.9.1.111.1.2.2.1.1.32
The sampling period, in minutes, for which the port monitors to see if the configuration loss threshold has been exceeeded.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortBeaconStationAddress 1.3.6.1.4.1.9.1.111.1.2.2.1.1.33
MAC address of the Station last generating a beacon MAC frame. This information is present for the generation of a trap and should not be used to represent the health of the ring.
OBJECT-TYPE    
  MacAddr  

cat2600TsPortBeaconNAUN 1.3.6.1.4.1.9.1.111.1.2.2.1.1.34
MAC address of the NAUN station last generating a beacon MAC frame. This information is present for the generation of a trap and should not be used to represent the health of the ring.
OBJECT-TYPE    
  MacAddr  

cat2600TsPortBeaconType 1.3.6.1.4.1.9.1.111.1.2.2.1.1.35
The type of Beacon which last occurred. Values are the same as for the Beacon Type subvector and are defined as follows: X'0001' Issued by a Dual Ring Station during reconfiguration X'0002' Signal Loss X'0003' Timer TCT expired during claim token; no claim token frames recieved X'0004' Timer TCT expired during claim token; claim token frames recieved X'0005' TXI Access Protocol; Heart Beat Protocol Failure
OBJECT-TYPE    
  INTEGER  

cat2600TsPortStnTable 1.3.6.1.4.1.9.1.111.1.2.2.3
Port station table.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsPortStnEntry

cat2600TsPortStnEntry 1.3.6.1.4.1.9.1.111.1.2.2.3.1
Definition of rows in the port table. The number of rows is determined by the hardware and is specified by the value of cat2600TsNumPorts. Rows can not be created or deleted via SNMP requests.
OBJECT-TYPE    
  Cat2600TsPortStnEntry  

cat2600TsPortStnPortNum 1.3.6.1.4.1.9.1.111.1.2.2.3.1.1
Port number corresponding to this entry.
OBJECT-TYPE    
  INTEGER  

cat2600TsPortStnAddress 1.3.6.1.4.1.9.1.111.1.2.2.3.1.2
Station MAC address. Equivalent to ifPhysAddr for this port.
OBJECT-TYPE    
  MacAddr  

cat2600TsPortStnLocation 1.3.6.1.4.1.9.1.111.1.2.2.3.1.3
Where the station is located.
OBJECT-TYPE    
  INTEGER local(1), remote(2)  

cat2600TsPortStnSrcFrames 1.3.6.1.4.1.9.1.111.1.2.2.3.1.4
Number of frames with this station as the source.
OBJECT-TYPE    
  Counter  

cat2600TsPortStnSrcBytes 1.3.6.1.4.1.9.1.111.1.2.2.3.1.5
Number of Bytes with this station as the source.
OBJECT-TYPE    
  Counter  

cat2600TsPortStnDestnFrames 1.3.6.1.4.1.9.1.111.1.2.2.3.1.6
Number of frames with this station as the destination.
OBJECT-TYPE    
  Counter  

cat2600TsPortStnDestnBytes 1.3.6.1.4.1.9.1.111.1.2.2.3.1.7
Number of bytes with this station as the destination.
OBJECT-TYPE    
  Counter  

cat2600TsOptPortStaTable 1.3.6.1.4.1.9.1.111.1.2.2.2
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsOptPortStaEntry

cat2600TsOptPortStaEntry 1.3.6.1.4.1.9.1.111.1.2.2.2.1
Definition of the rows in the optimized port station address table. Rows can not be created or deleted via SNMP requests.
OBJECT-TYPE    
  Cat2600TsOptPortStaEntry  

cat2600TsOptPortStaPos 1.3.6.1.4.1.9.1.111.1.2.2.2.1.1
Second index for items in the optimized port station address table.
OBJECT-TYPE    
  INTEGER 0..65535  

cat2600TsOptPortStaVal 1.3.6.1.4.1.9.1.111.1.2.2.2.1.2
An OCTET STRING containing a multiple number of stations from a port station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Location 1 - local 2 - remote - 1 octet Port of exit Mask - 4 octets Source Frame Count - 4 octets (integer in little endian) Destn Frame Count - 4 octets (integer in little endian) Source Byte Count - 4 octets (integer in little endian) Destn Byte Count - 4 octets (integer in little endian) The Port of exit mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
OBJECT-TYPE    
  OCTET STRING  

cat2600TsDmnTable 1.3.6.1.4.1.9.1.111.1.2.3.1
Currently active domains on the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsDmnEntry

cat2600TsDmnEntry 1.3.6.1.4.1.9.1.111.1.2.3.1.1
Definition of each row in the domain Table
OBJECT-TYPE    
  Cat2600TsDmnEntry  

cat2600TsDmnIndex 1.3.6.1.4.1.9.1.111.1.2.3.1.1.1
Domain number for each row.
OBJECT-TYPE    
  INTEGER 1..32  

cat2600TsDmnPorts 1.3.6.1.4.1.9.1.111.1.2.3.1.1.2
The set of ports that belong to this Domain. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the TokenRing Switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. Warning: You will not receive a set- complete message as a set to this object causes the ports to reset.
OBJECT-TYPE    
  OCTET STRING  

cat2600TsDmnIpState 1.3.6.1.4.1.9.1.111.1.2.3.1.1.3
IP configuration method for this domain.
OBJECT-TYPE    
  INTEGER disabled(1), auto-bootp(2), always-bootp(3)  

cat2600TsDmnIpAddress 1.3.6.1.4.1.9.1.111.1.2.3.1.1.4
The IP Address of this Domain. Changes to this object will take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsDmnIpSubnetMask 1.3.6.1.4.1.9.1.111.1.2.3.1.1.5
The subnet mask for this domain. Changes to this object will take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsDmnIpDefaultGateway 1.3.6.1.4.1.9.1.111.1.2.3.1.1.6
The IP Address of the default gateway for this Domain. Changes to this object will take effect immediately.
OBJECT-TYPE    
  IpAddress  

cat2600TsDmnStp 1.3.6.1.4.1.9.1.111.1.2.3.1.1.7
Turn Spanning tree on or off. Changes to this object will take effect immediately. The Spanning Tree Objects themselves are in the dtrConc MIB.
OBJECT-TYPE    
  INTEGER on(1), off(2)  

cat2600TsDmnName 1.3.6.1.4.1.9.1.111.1.2.3.1.1.8
User assigned name for each domain.
OBJECT-TYPE    
  DisplayString Size(0..48)  

cat2600TsDmnIfIndex 1.3.6.1.4.1.9.1.111.1.2.3.1.1.9
The ifIndex of the interface entry corresponding to each configured domain.
OBJECT-TYPE    
  INTEGER 1..100  

cat2600TsDmnBaseBridgeAddr 1.3.6.1.4.1.9.1.111.1.2.3.1.1.10
Base MAC address of this domain. Internally equivalent to dtrCRFMacAddress and to ifPhysAddress of the 'Domain' port.
OBJECT-TYPE    
  MacAddr  

cat2600TsDmnNumStations 1.3.6.1.4.1.9.1.111.1.2.3.1.1.11
Aggregate number of currently active stations (nodes) on all ports in the domain.
OBJECT-TYPE    
  INTEGER  

cat2600TsDmnMostStations 1.3.6.1.4.1.9.1.111.1.2.3.1.1.12
Highest aggregate number of stations ever active on all ports at one time, since the last reset or power cycle.
OBJECT-TYPE    
  INTEGER  

cat2600TsDmnStationTable 1.3.6.1.4.1.9.1.111.1.2.3.5
Stations seen in each domain.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsDmnStationEntry

cat2600TsDmnStationEntry 1.3.6.1.4.1.9.1.111.1.2.3.5.1
Definition of each row in the domain specific station table. The object is equivalent to dtrFdbDynamicAddrTable or dtrFdbStaticAddrTable depending if the entry is learned or is a configured filter.
OBJECT-TYPE    
  Cat2600TsDmnStationEntry  

cat2600TsDmnStationDmnIndex 1.3.6.1.4.1.9.1.111.1.2.3.5.1.1
Integer reference to the domain number in the domain table.
OBJECT-TYPE    
  INTEGER 0..65535  

cat2600TsDmnStationAddress 1.3.6.1.4.1.9.1.111.1.2.3.5.1.2
The Station's MAC address.
OBJECT-TYPE    
  OCTET STRING Size(6)  

cat2600TsDmnStationPort 1.3.6.1.4.1.9.1.111.1.2.3.5.1.3
The source port for the Station. The dtrConc MIB equivalents are dtrFdbDynamicAddrPortNumber and dtrFdbStaticAddrPortNumber.
OBJECT-TYPE    
  INTEGER  

cat2600TsDmnStationTraffic 1.3.6.1.4.1.9.1.111.1.2.3.5.1.4
A bit string that identifies the ports that this station has generated traffic to or from. The bits correspond to ports, with bits and ports numbered from right to left so that bit 0 represents the CPU, bit 1 represents port 1, and so forth. For example, the returned string 01 4D can be expanded to: 00000001 01001101 binary representation of object string xxxxxxx8 7654321C ports corresponding to bits This indicates ports 8, 6, 3, 2 and the CPU. The size of this string is adjusted to include all ports with traffic.
OBJECT-TYPE    
  OCTET STRING  

cat2600TsOptDmnStaTable 1.3.6.1.4.1.9.1.111.1.2.3.6
A table of station addresses known at an individual port. This table is designed to reduce the number of SNMP GETNEXT requests. This is done by packing many values into an octet string. (The maximum size frame should be used to return the result.) The instance returned for a GETNEXT is the value that identifies the last 'row' in the octet string. When the table is completely retrieved with one or more GETNEXTs, duplicate entries may be present, and entries may be skipped if the table is changing while being retrieved.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsOptDmnStaEntry

cat2600TsOptDmnStaEntry 1.3.6.1.4.1.9.1.111.1.2.3.6.1
Definition of the rows in the optimized domain station address table. Rows can not be created or deleted via SNMP requests.
OBJECT-TYPE    
  Cat2600TsOptDmnStaEntry  

cat2600TsOptDmnStaPos 1.3.6.1.4.1.9.1.111.1.2.3.6.1.1
Second index for items in the optimized port station address table.
OBJECT-TYPE    
  INTEGER 0..65535  

cat2600TsOptDmnStaVal 1.3.6.1.4.1.9.1.111.1.2.3.6.1.2
An OCTET STRING containing a multiple number of stations from the domain station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Port of Entry - 1 octet Traffic Mask - 4 octets The traffic mask is encoded in its raw form as stored in the switch. Octet 1 Bit position 7 6 5 4 3 2 1 0 Port Number 31 30 29 28 27 26 25 24 Octet 2 Bit position 7 6 5 4 3 2 1 0 Port Number 23 22 21 20 19 18 17 16 Octet 3 Bit position 7 6 5 4 3 2 1 0 Port Number 15 14 13 12 11 10 9 8 Octet 4 Bit position 7 6 5 4 3 2 1 0 Port Number 7 6 5 4 3 2 1 CPU
OBJECT-TYPE    
  OCTET STRING  

cat2600TsPipeTable 1.3.6.1.4.1.9.1.111.1.2.4.1
The TokenPipe table.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsPipeEntry

cat2600TsPipeEntry 1.3.6.1.4.1.9.1.111.1.2.4.1.1
Definition of each row in the TokenPipe table.
OBJECT-TYPE    
  Cat2600TsPipeEntry  

cat2600TsPipeNumber 1.3.6.1.4.1.9.1.111.1.2.4.1.1.1
The TokenPipe number for this row.
OBJECT-TYPE    
  INTEGER 1..8  

cat2600TsPipePorts 1.3.6.1.4.1.9.1.111.1.2.4.1.1.2
The set of ports in this switch which are active in this Pipe. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 (if available), etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the NWays LAN Switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
OBJECT-TYPE    
  OCTET STRING Size(4)  

cat2600TsFilterTable 1.3.6.1.4.1.9.1.111.1.2.5.1
Filters set up in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsFilterEntry

cat2600TsFilterEntry 1.3.6.1.4.1.9.1.111.1.2.5.1.1
Definition of each row in the filter table.
OBJECT-TYPE    
  Cat2600TsFilterEntry  

cat2600TsFilterStationAddress 1.3.6.1.4.1.9.1.111.1.2.5.1.1.1
The MAC address in a frame to which this entry's filtering information applies.
OBJECT-TYPE    
  MacAddr  

cat2600TsFilterType 1.3.6.1.4.1.9.1.111.1.2.5.1.1.2
There are two types of filters (i) source filters which act on the source address portion of a packet and (ii) destination filters which act on the destination address portion of a packet.
OBJECT-TYPE    
  INTEGER source-filter(1), destination-filter(2)  

cat2600TsFilterStatus 1.3.6.1.4.1.9.1.111.1.2.5.1.1.3
This object indicates the status of this entry. valid(1) - this entry is currently in use and will remain so after the next reset of the bridge. invalid(2) - writing this value to the object removes the corresponding entry.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

cat2600TsFilterPorts 1.3.6.1.4.1.9.1.111.1.2.5.1.1.4
The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the TokenRing Switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. All frames with destination address equal to the station address corresponding to this entry and entering from any of the specified ports will be dropped. Setting this object with a MIB instance corresponding to the dotted decimal MAC address and a filter type, with the set value equal to the mask of ports you want to filter will create an entry in the table. Ex. MIB instance: 16.0.90.3.0.36.1 SNMP set value: 7F 00 00 00 This would create a filter entry with the following characteristics: MAC Address: 10 00 5A 03 00 24 (canonical format) Filter Type: source-filter Filter Ports: 2 3 4 5 6 7 8
OBJECT-TYPE    
  OCTET STRING  

cat2600TsFilterMask 1.3.6.1.4.1.9.1.111.1.2.5.1.1.5
The filter mask for this station. The semantics of the filter mask depend on the type of filter. For a source filter, the mask gives the ports that are allowed to receive frames from the filtered address. For a destination filter, the mask gives the ports that are forced to receive frames destined to the filtered address. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16 (if available), etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
OBJECT-TYPE    
  OCTET STRING Size(4)  

cat2600TsUFCTable 1.3.6.1.4.1.9.1.111.1.2.6.1
A table of the installed UFC cards in the switch. The number of entries in the table is given by cat2600TsNumberofUFCs.
OBJECT-TYPE    
  SEQUENCE OF  
    Cat2600TsUFCEntry

cat2600TsUFCEntry 1.3.6.1.4.1.9.1.111.1.2.6.1.1
The objects contained in the UFC table.
OBJECT-TYPE    
  Cat2600TsUFCEntry  

cat2600TsUFCSlotNum 1.3.6.1.4.1.9.1.111.1.2.6.1.1.1
The number of the slot in which the UFC is installed.
OBJECT-TYPE    
  INTEGER 1..32  

cat2600TsUFCNumPhysIfs 1.3.6.1.4.1.9.1.111.1.2.6.1.1.2
The total number of physical network interfaces on the UFC. This count does not include the interface _OF_ the card or any logical interfaces which be _ON_ the card.
OBJECT-TYPE    
  INTEGER 0..65535  

cat2600TsUFCManufacturer 1.3.6.1.4.1.9.1.111.1.2.6.1.1.3
Firmware manufacturer.
OBJECT-TYPE    
  DisplayString Size(16)  

cat2600TsUFCType 1.3.6.1.4.1.9.1.111.1.2.6.1.1.4
The code representing what type of UFC is present. UFC codes are assigned by Cisco.
OBJECT-TYPE    
  OCTET STRING Size(2)  

cat2600TsUFCTypeDesc 1.3.6.1.4.1.9.1.111.1.2.6.1.1.5
A text string describing what type of UFC is present.
OBJECT-TYPE    
  DisplayString Size(0..127)  

cat2600TsUFCHwVer 1.3.6.1.4.1.9.1.111.1.2.6.1.1.6
The hardware version in the form major.minor.
OBJECT-TYPE    
  DisplayString Size(0..64)  

cat2600TsUFCFwVer 1.3.6.1.4.1.9.1.111.1.2.6.1.1.7
The firmware version in the form major.minor.
OBJECT-TYPE    
  DisplayString Size(0..64)  

cat2600TsUFCStatus 1.3.6.1.4.1.9.1.111.1.2.6.1.1.8
The operational status of the UFC.
OBJECT-TYPE    
  INTEGER up(1), down(2), other(3)  

cat2600TsUFCReset 1.3.6.1.4.1.9.1.111.1.2.6.1.1.9
The object is used to reset a UFC. Writing a softReset(3) causes the switch to reset the hardware, run the minimum number of diagnostics, and clear all counters. Writing hardReset(2) causes the UFC to run power up diagnostics and then execute a softreset.
OBJECT-TYPE    
  INTEGER running(1), hardReset(2), softReset(3)