CADANT-IPDR-MIB

File: CADANT-IPDR-MIB.mib (35599 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
INET-ADDRESS-MIB CADANT-TC CADANT-PRODUCTS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter64
Integer32 Unsigned32 MODULE-COMPLIANCE
OBJECT-GROUP TEXTUAL-CONVENTION TruthValue
RowStatus InetPortNumber InetAddressType
InetAddress InetAddressIPv4 InetAddressIPv4or6
cadExperimental

Defined Types

CadIpdrCollectorEntry  
SEQUENCE    
  cadIpdrCollectorPriority INTEGER
  cadIpdrCollectorIpAddrType InetAddressType
  cadIpdrCollectorIpAddress InetAddressIPv4or6
  cadIpdrCollectorPort InetPortNumber
  cadIpdrCollectorActive TruthValue
  cadIpdrCollectorPrimary TruthValue
  cadIpdrCollectorOutIntRecs Counter64
  cadIpdrCollectorOutStpRecs Counter64
  cadIpdrCollectorSupIntRecs Counter64
  cadIpdrCollectorStatus RowStatus

CadIpdrReportCycleEntry  
SEQUENCE    
  cadIpdrReportStartHH INTEGER
  cadIpdrReportStartMM INTEGER
  cadIpdrReportInterval INTEGER
  cadIpdrReportOutIntRecs Counter64
  cadIpdrReportOutStpRecs Counter64
  cadIpdrReportSupIntRecs Counter64
  cadIpdrReportStatus RowStatus

CadIpdrServiceEntry  
SEQUENCE    
  cadIpdrServiceSessionId INTEGER
  cadIpdrServiceType INTEGER
  cadIpdrServiceMethod INTEGER
  cadIpdrServicePriority INTEGER
  cadIpdrServiceDataAckWindow INTEGER
  cadIpdrServiceDataAckTimeout INTEGER
  cadIpdrServiceReportCycleSet INTEGER
  cadIpdrServiceEvtPaceGap INTEGER
  cadIpdrServiceAllCounts TruthValue
  cadIpdrServiceStatus RowStatus

CadIpdrReportCycleSetEntry  
SEQUENCE    
  cadIpdrReportCycleSetSet INTEGER
  cadIpdrReportCycleSetStartHH INTEGER
  cadIpdrReportCycleSetStartMM INTEGER
  cadIpdrReportCycleSetInterval INTEGER
  cadIpdrReportCycleSetStatus RowStatus

CadIpdrCountsEntry  
SEQUENCE    
  cadIpdrCountsSessionId INTEGER
  cadIpdrCountsCollectorPriority INTEGER
  cadIpdrCountsCollectorIpAddress InetAddressIPv4or6
  cadIpdrCountsStartHH INTEGER
  cadIpdrCountsStartMM INTEGER
  cadIpdrCountsAdhocIndex Unsigned32
  cadIpdrCountsStartTime OCTET STRING
  cadIpdrCountsStopTime OCTET STRING
  cadIpdrCountsIntRecs Counter64
  cadIpdrCountsSupIntRecs Counter64
  cadIpdrCountsStartRecs Counter64
  cadIpdrCountsStopRecs Counter64
  cadIpdrCountsEventRecs Counter64
  cadIpdrCountsStatus RowStatus

CadIpdrSessionCollectorEntry  
SEQUENCE    
  cadIpdrSessionCollectorSessionId INTEGER
  cadIpdrSessionCollectorPriority INTEGER
  cadIpdrSessionCollectorIpAddrType InetAddressType
  cadIpdrSessionCollectorIpAddress InetAddressIPv4or6
  cadIpdrSessionCollectorPort InetPortNumber
  cadIpdrSessionCollectorActive TruthValue
  cadIpdrSessionCollectorPrimary TruthValue
  cadIpdrSessionCollectorStatus RowStatus

Defined Values

cadIpdrMib 1.3.6.1.4.1.4998.1.1.100.30
This MIB modules contains the definitions to support configuration and status for C4 IPDR implementation.
MODULE-IDENTITY    

cadIpdrMIBObjects 1.3.6.1.4.1.4998.1.1.100.30.1
OBJECT IDENTIFIER    

cadIpdrMIBConformance 1.3.6.1.4.1.4998.1.1.100.30.2
OBJECT IDENTIFIER    

cadIpdrExportEnabled 1.3.6.1.4.1.4998.1.1.100.30.1.1
IPDR streams is enabled or disabled. When enabled the cadIpdrQueryPort and cadIpdrStreamingPort will be open to listen for collector connections. When disabled, all ports will be closed.
OBJECT-TYPE    
  TruthValue  

cadIpdrQueryPort 1.3.6.1.4.1.4998.1.1.100.30.1.2
UDP port used to listen for collector queries.
OBJECT-TYPE    
  INTEGER 1..65535  

cadIpdrStreamingPort 1.3.6.1.4.1.4998.1.1.100.30.1.3
TCP port used to listen for collector connections.
OBJECT-TYPE    
  INTEGER 1..65535  

cadIpdrDataAckWindow 1.3.6.1.4.1.4998.1.1.100.30.1.4
Maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 1..65535  

cadIpdrDataAckTimeout 1.3.6.1.4.1.4998.1.1.100.30.1.5
Maximum elapsed time before a DATA message must be acknowledged by the collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 1..600  

cadIpdrKeepAliveInterval 1.3.6.1.4.1.4998.1.1.100.30.1.6
Maximum duration of protocol silence before a KEEPALIVE message must be sent.
OBJECT-TYPE    
  INTEGER 1..600  

cadIpdrExportAllCounts 1.3.6.1.4.1.4998.1.1.100.30.1.7
Export all counts if true, and supress duplicate counts if false. The default is false. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  TruthValue  

cadIpdrExportCpeInfo 1.3.6.1.4.1.4998.1.1.100.30.1.8
Export information about CPEs behind CMs (CmCpeInfoList) if set to true. If false, supress information about CPEs. The default is false. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  TruthValue  

cadIpdrSessionId 1.3.6.1.4.1.4998.1.1.100.30.1.9
session-id used in the header of IPDR protocol messages. The default is 1. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 0..1  

cadIpdrExportMode 1.3.6.1.4.1.4998.1.1.100.30.1.10
DOCSIS mode exporter, either DOCSIS 2.0 or DOCSIS 3.0. The default is DOCSIS 2.0 mode, or 1.
OBJECT-TYPE    
  INTEGER 1..2  

cadIpdrCollectorTable 1.3.6.1.4.1.4998.1.1.100.30.1.11
A priority ordered list of collectors that will be allowed to connect to the exporter. The highest priority active collector is designated the primary collector. This list is exclusive and any collector not in this list will be ignored. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrCollectorEntry

cadIpdrCollectorEntry 1.3.6.1.4.1.4998.1.1.100.30.1.11.1
Tok_String
OBJECT-TYPE    
  CadIpdrCollectorEntry  

cadIpdrCollectorPriority 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.1
The collector priority. Lower values indicate higher priority. The default priority is 1. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrCollectorIpAddrType 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.2
The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  InetAddressType  

cadIpdrCollectorIpAddress 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.3
Source IP address of a collector that will be permitted to connect to the exporter. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  InetAddressIPv4or6  

cadIpdrCollectorPort 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.4
Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  InetPortNumber  

cadIpdrCollectorActive 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.5
True if this collector is connected to the exporter. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  TruthValue  

cadIpdrCollectorPrimary 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.6
True if this collector is the primary collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  TruthValue  

cadIpdrCollectorOutIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.7
Number of interim data records exported to this collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrCollectorOutStpRecs 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.8
Number of stop data records exported to this collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrCollectorSupIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.9
Number of interim data records suppressed for this collector. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrCollectorStatus 1.3.6.1.4.1.4998.1.1.100.30.1.11.1.10
Row control for this collector. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  RowStatus  

cadIpdrReportCycleTable 1.3.6.1.4.1.4998.1.1.100.30.1.12
A list of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrReportCycleEntry

cadIpdrReportCycleEntry 1.3.6.1.4.1.4998.1.1.100.30.1.12.1
Tok_String
OBJECT-TYPE    
  CadIpdrReportCycleEntry  

cadIpdrReportStartHH 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.1
The report cycle start hour. The default is 00. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 0..23  

cadIpdrReportStartMM 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.2
The report cycle start minutes after the hour. Default is 00. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 0..59  

cadIpdrReportInterval 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.3
The report cycle interval duration in minutes. The default is 60 minutes. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  INTEGER 15..1440  

cadIpdrReportOutIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.4
Number of interim data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrReportOutStpRecs 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.5
Number of stop data records exported during this report cycle. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrReportSupIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.6
Number of interim data records suppressed during this report cycle. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  Counter64  

cadIpdrReportStatus 1.3.6.1.4.1.4998.1.1.100.30.1.12.1.7
Row control for this report cycle. The only valid values for this object are createAndGo, destroy, and active. Applicable to DOCSIS 2.0 mode.
OBJECT-TYPE    
  RowStatus  

cadIpdrServiceTable 1.3.6.1.4.1.4998.1.1.100.30.1.13
A session-id ordered list of services that will be allowed to be requested by the Collector. This list is exclusive and are used when the exporter is in DOCSIS 3.0 mode.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrServiceEntry

cadIpdrServiceEntry 1.3.6.1.4.1.4998.1.1.100.30.1.13.1
Tok_String
OBJECT-TYPE    
  CadIpdrServiceEntry  

cadIpdrServiceSessionId 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.1
The session-id used in the header of IPDR protocol messages. The default is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrServiceType 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.2
The session service types are unknown(0), samis_1(1), samis_2(2), cpe(3), cm_reg(4), cm_us(5), spect(6), diag(7), topo(8), us_util(9), ds_util(10), diag_evt(11), diag_det(12), cm_sf(13), cpe_a2(14), mcast(15). The default is 1.
OBJECT-TYPE    
  INTEGER 0..13  

cadIpdrServiceMethod 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.3
The session service method (unknown, time, event, adhoc). The default is time.
OBJECT-TYPE    
  INTEGER 0..3  

cadIpdrServicePriority 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.4
The session priority. Lower values indicate higher priority. This object is not used.
OBJECT-TYPE    
  INTEGER 0..64  

cadIpdrServiceDataAckWindow 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.5
The session maximum number of unacknowledged IPDR/SP messages that may be outstanding to the collector.
OBJECT-TYPE    
  INTEGER 1..65535  

cadIpdrServiceDataAckTimeout 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.6
The session maximum elapsed time before a DATA message must be acknowledged by the collector.
OBJECT-TYPE    
  INTEGER 1..600  

cadIpdrServiceReportCycleSet 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.7
The session report cycle set.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrServiceEvtPaceGap 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.8
The session event pace gap.
OBJECT-TYPE    
  INTEGER 0..30  

cadIpdrServiceAllCounts 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.9
Export all counts if true, and supress duplicate counts if false. The default is false.
OBJECT-TYPE    
  TruthValue  

cadIpdrServiceStatus 1.3.6.1.4.1.4998.1.1.100.30.1.13.1.10
Row control for this service. The only valid values for this object are createAndGo, destroy, and active.
OBJECT-TYPE    
  RowStatus  

cadIpdrReportCycleSetTable 1.3.6.1.4.1.4998.1.1.100.30.1.14
A list of sets of scheduled report cycle start times and interval durations. Multiple entries indicate blocks of time with variable interval durations. Applicable to DOCSIS 3.0 mode.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrReportCycleSetEntry

cadIpdrReportCycleSetEntry 1.3.6.1.4.1.4998.1.1.100.30.1.14.1
Tok_String
OBJECT-TYPE    
  CadIpdrReportCycleSetEntry  

cadIpdrReportCycleSetSet 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.1
The report cycle set id number. The default is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrReportCycleSetStartHH 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.2
The report cycle set start hour. The default is 00.
OBJECT-TYPE    
  INTEGER 0..23  

cadIpdrReportCycleSetStartMM 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.3
The report cycle set start minutes after the hour. Default is 00.
OBJECT-TYPE    
  INTEGER 0..59  

cadIpdrReportCycleSetInterval 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.4
The report cycle set interval duration in minutes. The default is 60 minutes.
OBJECT-TYPE    
  INTEGER 15..1440  

cadIpdrReportCycleSetStatus 1.3.6.1.4.1.4998.1.1.100.30.1.14.1.5
Row control for this report cycle set entry. The only valid values for this object are createAndGo, destroy, and active.
OBJECT-TYPE    
  RowStatus  

cadIpdrCountsTable 1.3.6.1.4.1.4998.1.1.100.30.1.15
A session-id/priority/collector ordered list of counts for all sessions. Applicable to DOCSIS 2.0 and 3.0 modes.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrCountsEntry

cadIpdrCountsEntry 1.3.6.1.4.1.4998.1.1.100.30.1.15.1
Tok_String
OBJECT-TYPE    
  CadIpdrCountsEntry  

cadIpdrCountsSessionId 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.1
The counts session-id used in the header of IPDR protocol messages. The default is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrCountsCollectorPriority 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.2
The counts collector priority. Lower values indicate higher priority. The default priority is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrCountsCollectorIpAddress 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.3
The counts source IP address of a collector that will be permitted to connect to the exporter.
OBJECT-TYPE    
  InetAddressIPv4or6  

cadIpdrCountsStartHH 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.4
The counts report cycle start hour. The default is 00.
OBJECT-TYPE    
  INTEGER 0..23  

cadIpdrCountsStartMM 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.5
The counts report cycle start minutes after the hour. Default is 00.
OBJECT-TYPE    
  INTEGER 0..59  

cadIpdrCountsAdhocIndex 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.6
The counts adhoc index.
OBJECT-TYPE    
  Unsigned32 0..4294967295  

cadIpdrCountsStartTime 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.7
The counts report cycle start time. Default is 0 length.
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

cadIpdrCountsStopTime 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.8
The counts report cycle stop time. Default is 0 length.
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

cadIpdrCountsIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.9
Number of interim data records exported for this session-id to this collector.
OBJECT-TYPE    
  Counter64  

cadIpdrCountsSupIntRecs 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.10
Number of interim data records suppressed for this session-id to this collector.
OBJECT-TYPE    
  Counter64  

cadIpdrCountsStartRecs 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.11
Number of start data records exported for this session-id to this collector.
OBJECT-TYPE    
  Counter64  

cadIpdrCountsStopRecs 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.12
Number of stop data records exported for this session-id to this collector.
OBJECT-TYPE    
  Counter64  

cadIpdrCountsEventRecs 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.13
Number of event data records exported for this session-id to this collector.
OBJECT-TYPE    
  Counter64  

cadIpdrCountsStatus 1.3.6.1.4.1.4998.1.1.100.30.1.15.1.14
Row control for this counts entry. The only valid values for this object are createAndGo, destroy, and active.
OBJECT-TYPE    
  RowStatus  

cadIpdrSessionCollectorTable 1.3.6.1.4.1.4998.1.1.100.30.1.16
A session and priority ordered list of collectors that is used to track the Active and Primary status of the collector relative to this session. Applicable to DOCSIS 3.0 mode.
OBJECT-TYPE    
  SEQUENCE OF  
    CadIpdrSessionCollectorEntry

cadIpdrSessionCollectorEntry 1.3.6.1.4.1.4998.1.1.100.30.1.16.1
Tok_String
OBJECT-TYPE    
  CadIpdrSessionCollectorEntry  

cadIpdrSessionCollectorSessionId 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.1
The counts session-id used in the header of IPDR protocol messages. The default is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrSessionCollectorPriority 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.2
The collector priority. Lower values indicate higher priority. The default priority is 1.
OBJECT-TYPE    
  INTEGER 1..255  

cadIpdrSessionCollectorIpAddrType 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.3
The type of internet address (IPv4 or IPv6). The only internet address type currently allowed is IPv4.
OBJECT-TYPE    
  InetAddressType  

cadIpdrSessionCollectorIpAddress 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.4
Source IP address of a collector that will be permitted to connect to the exporter.
OBJECT-TYPE    
  InetAddressIPv4or6  

cadIpdrSessionCollectorPort 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.5
Destination port of collector if exporter trys to connect to the collector. Default is 4747. This object is currently disabled.
OBJECT-TYPE    
  InetPortNumber  

cadIpdrSessionCollectorActive 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.6
True if this collector is connected to the exporter for this session.
OBJECT-TYPE    
  TruthValue  

cadIpdrSessionCollectorPrimary 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.7
True if this collector is the primary collector for this session.
OBJECT-TYPE    
  TruthValue  

cadIpdrSessionCollectorStatus 1.3.6.1.4.1.4998.1.1.100.30.1.16.1.8
Row control for this collector. The only valid values for this object are createAndGo, destroy, and active.
OBJECT-TYPE    
  RowStatus  

cadIpdrMIBCompliances 1.3.6.1.4.1.4998.1.1.100.30.2.1
OBJECT IDENTIFIER    

cadIpdrMIBGroups 1.3.6.1.4.1.4998.1.1.100.30.2.2
OBJECT IDENTIFIER    

cadIpdrMIBCompliance 1.3.6.1.4.1.4998.1.1.100.30.2.1.1
The compliance statement for the Arris IPDR implementation.
MODULE-COMPLIANCE    

cadIpdrBasicGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.1
Tok_String
OBJECT-GROUP    

cadIpdrCollectorGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.2
Tok_String
OBJECT-GROUP    

cadIpdrReportGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.3
Tok_String
OBJECT-GROUP    

cadIpdrServiceGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.4
Tok_String
OBJECT-GROUP    

cadIpdrReportCycleSetGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.5
Tok_String
OBJECT-GROUP    

cadIpdrCountsGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.6
Tok_String
OBJECT-GROUP    

cadIpdrSessionCollectorGroup 1.3.6.1.4.1.4998.1.1.100.30.2.2.7
Tok_String
OBJECT-GROUP