CADANT-CMTS-IF3-MIB
File:
CADANT-CMTS-IF3-MIB.mib (51143 bytes)
Imported modules
Imported symbols
Defined Types
HhMmSs |
|
A time specification of hours, minutes, and
seconds.
field octets contents range
----- ------ -------- -----
1 1 hour 0..23
2 1 minutes 0..59
3 1 seconds 0..59 |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(3) |
|
CmStatusEventTypeCode |
|
This field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
secondaryChlMddTimeout(1), qamFecLockFailure(2), seqOutOfRange(3), mddRecovery(4), qamFecLockRecovery(5), t4Timeout(6), t3RetriesExceeded(7), t3RangingRecovery(8), cmOnBatteryBackup(9), cmAcPowerRestored(10), ofdmProfileFailure(16), dpdMismatch(18), ncpProfileFailure(20), plcFecLockFailure(21), ncpProfileRecovery(22), plcFecLockRecovery(23), ofdmProfileRecovery(24) |
|
CadCmStatusMdCfgEntry |
|
SEQUENCE |
|
|
|
|
cadCmStatusEventTypeCode |
CmStatusEventTypeCode |
|
|
cadCmStatusEventDescription |
DisplayString |
|
|
cadCmStatusEventEnabled |
TruthValue |
|
|
cadCmStatusMaxEventHoldoff |
INTEGER |
|
|
cadCmStatusMaxNumReports |
INTEGER |
|
CadCmtsCmCtrlStatusOverrideCfgEntry |
|
SEQUENCE |
|
|
|
|
cadCmtsCmCtrlStatusMacAddress |
MacAddress |
|
|
cadCmtsCmCtrlStatusEventTypeCode |
CmStatusEventTypeCode |
|
|
cadCmtsCmCtrlStatusOverrideEnabled |
TruthValue |
|
|
cadCmtsCmCtrlStatusOverrideDsChList |
OCTET STRING |
|
|
cadCmtsCmCtrlStatusOverrideUsChList |
OCTET STRING |
|
|
cadCmtsCmCtrlStatusRowStatus |
RowStatus |
|
CadCmStatusCountsEntry |
|
SEQUENCE |
|
|
|
|
cadCmStatusCountsCmMacAddress |
MacAddress |
|
|
cadCmStatusCountsEventTypeCode |
CmStatusEventTypeCode |
|
|
cadCmStatusCountsEventDescription |
DisplayString |
|
|
cadCmStatusCountsEventCount |
Counter64 |
|
|
cadCmStatusCountsReportedDsChIfIndex |
InterfaceIndexOrZero |
|
|
cadCmStatusCountsReportedUsChIfIndex |
InterfaceIndexOrZero |
|
|
cadCmStatusCountsReportedDsid |
Dsid |
|
|
cadCmStatusCountsTimeStamp |
TimeStamp |
|
CadCmtsCmRepairParamEntry |
|
SEQUENCE |
|
|
|
|
cadCmtsCmRepairEnabled |
TruthValue |
|
|
cadCmtsCmRepairWindowStartTime |
HhMmSs |
|
|
cadCmtsCmRepairWindowEndTime |
HhMmSs |
|
|
cadCmtsCmRepairInterval |
HhMmSs |
|
CadCmtsCmRegImpairedStatusEntry |
|
SEQUENCE |
|
|
|
|
cadCmtsCmRegImpairedReason |
INTEGER |
|
|
cadCmtsCmRegImpairedFaultDetected |
DateAndTime |
|
|
cadCmtsCmRegImpairedLastRepairAttempt |
DateAndTime |
|
|
cadCmtsCmRegImpairedLastRepairAction |
INTEGER |
|
|
cadCmtsCmRegImpairedIfIndex |
InterfaceIndex |
|
CadIf3CmtsCmUsStatusEntry |
|
SEQUENCE |
|
|
|
|
cadIf3CmtsCmUsStatusChIfIndex |
InterfaceIndex |
|
|
cadIf3CmtsCmUsStatusModulationType |
DocsisUpstreamType |
|
|
cadIf3CmtsCmUsStatusIsMuted |
TruthValue |
|
|
cadIf3CmtsCmUsStatusRangingStatus |
RangingState |
|
CadRccStatusEntry |
|
SEQUENCE |
|
|
|
|
cadRccStatusRcpId |
RcpId |
|
|
cadRccStatusId |
Unsigned32 |
|
|
cadRccStatusRccCfgId |
Unsigned32 |
|
|
cadRccStatusValidityCode |
INTEGER |
|
|
cadRccStatusValidityCodeText |
SnmpAdminString |
|
|
cadRccStatusDsChSetId |
ChSetId |
|
|
cadRccStatusChannelCount |
Unsigned32 |
|
CadIf3CsSummaryEntry |
|
SEQUENCE |
|
|
|
|
cadIf3CsDir |
IfDirection |
|
|
cadIf3CsId |
ChSetId |
|
|
cadIf3CsNumOther |
Integer32 |
|
|
cadIf3CsNumInitRanging |
Integer32 |
|
|
cadIf3CsNumRangingComplete |
Integer32 |
|
|
cadIf3CsNumStartEae |
Integer32 |
|
|
cadIf3CsNumStartDhcpv4 |
Integer32 |
|
|
cadIf3CsNumStartDhcpv6 |
Integer32 |
|
|
cadIf3CsNumDhcpv4Complete |
Integer32 |
|
|
cadIf3CsNumDhcpv6Complete |
Integer32 |
|
|
cadIf3CsNumStartCfgFileDownload |
Integer32 |
|
|
cadIf3CsNumCfgFileDownloadComplete |
Integer32 |
|
|
cadIf3CsNumStartRegistration |
Integer32 |
|
|
cadIf3CsNumRegistrationComplete |
Integer32 |
|
|
cadIf3CsNumOperational |
Integer32 |
|
|
cadIf3CsNumBpiInit |
Integer32 |
|
|
cadIf3CsNumForwardingDisabled |
Integer32 |
|
|
cadIf3CsNumRfMuteAll |
Integer32 |
|
|
cadIf3CsNumTotal |
Integer32 |
|
|
cadIf3CsNumRangingAborted |
Integer32 |
|
|
cadIf3CsNumRangFlaps |
Integer32 |
|
|
cadIf3CsNumProvFlaps |
Integer32 |
|
|
cadIf3CsNumRegFlaps |
Integer32 |
|
CadIfCmtsCmFailedProfStatusEntry |
|
SEQUENCE |
|
|
|
|
cadIfCmtsCmFailedProfMacAddress |
MacAddress |
|
|
cadIfCmtsCmFailedProfIfIndex |
InterfaceIndex |
|
|
cadIfCmtsCmFailedProfId |
Integer32 |
|
|
cadIfCmtsCmFailedProfReason |
INTEGER |
|
|
cadIfCmtsCmFailedProfFaultDetected |
DateAndTime |
|
Defined Values
cadCmtsIf3Mib |
1.3.6.1.4.1.4998.1.1.110.1 |
This MIB module contains Cadant IF3 MIB information. |
MODULE-IDENTITY |
|
|
|
cadCmStatusMdCfgTable |
1.3.6.1.4.1.4998.1.1.110.1.1.1 |
At MAC Domain creation time with one row per cadCmStatusEventTypeCode
value for the new MAC Domain. These rows MUST be deleted by the CMTS
when the MAC Domain is deleted. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadCmStatusMdCfgEntry |
|
cadCmStatusMdCfgEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1 |
A conceptual row containing information about the
Cadant CM Status Mac domain configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadCmStatusMdCfgEntry |
|
|
cadCmStatusEventTypeCode |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1.1 |
This field contains a unique code which
describes the event condition. Refer to Table
6-56 in MULPI. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CmStatusEventTypeCode |
|
|
cadCmStatusEventDescription |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1.2 |
Textual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..80) |
|
cadCmStatusEventEnabled |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1.3 |
This attribute represents the enable/disable
for a particular event for which status may be
reported via the CM-STATUS message. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
cadCmStatusMaxEventHoldoff |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1.4 |
The CM-STATUS reporting mechanism includes a
random holdoff prior to transmission of status report
messages. This attribute is the maximum value of that
holdoff timer to be used by the CM when determining
when to transmit a CM-STATUS message. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..65535 |
|
cadCmStatusMaxNumReports |
1.3.6.1.4.1.4998.1.1.110.1.1.1.1.5 |
Maximum Number of Reports per event:
0: Unlimited number of reports
1-255: Maximum number of reports for an event type
reporting transaction. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
0..255 |
|
cadCmtsCmCtrlStatusOverrideCfgEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.2.1 |
A conceptual row containing information about the
Cadant CM control status override configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadCmtsCmCtrlStatusOverrideCfgEntry |
|
|
cadCmtsCmCtrlStatusOverrideEnabled |
1.3.6.1.4.1.4998.1.1.110.1.1.2.1.3 |
This attribute can be used to override the
CM's primary channel MDD with regard to enabling a
particular event type. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
cadCmtsCmCtrlStatusOverrideDsChList |
1.3.6.1.4.1.4998.1.1.110.1.1.2.1.4 |
List of DS channel IDs to which this override
applies. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
cadCmtsCmCtrlStatusOverrideUsChList |
1.3.6.1.4.1.4998.1.1.110.1.1.2.1.5 |
List of US channel IDs to which this override
applies. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..255) |
|
cadCmStatusCountsEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.3.1 |
A conceptual row containing information about the
Cadant CM status counter. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadCmStatusCountsEntry |
|
|
cadCmStatusCountsEventDescription |
1.3.6.1.4.1.4998.1.1.110.1.1.3.1.3 |
Textual description of event. This will
default to a description that is generated by the CMTS
but will be set to the Event Description which is sent
from the CM, if applicable. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..80) |
|
cadCmStatusCountsEventCount |
1.3.6.1.4.1.4998.1.1.110.1.1.3.1.4 |
Count of the number of times that the
cadCmStatusEventTypeCode has been reported for this
CM. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter64 |
|
|
cadCmtsCmRepairParamEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.4.1 |
A conceptual row containing information about the
CM repair parameter. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadCmtsCmRepairParamEntry |
|
|
cadCmtsCmRepairEnabled |
1.3.6.1.4.1.4998.1.1.110.1.1.4.1.1 |
When true(1), the CMTS will periodically
attempt to repair any unresolved topology and/or
partial service condition for each CM which has been
added to the CM problem list. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
cadCmtsCmRepairInterval |
1.3.6.1.4.1.4998.1.1.110.1.1.4.1.4 |
Period between repair attemts during repair
window. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
HhMmSs |
|
|
cadCmtsCmRegImpairedStatusEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.5.1 |
A conceptual row containing information about the
CM impaired status. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadCmtsCmRegImpairedStatusEntry |
|
|
cadCmtsCmRegImpairedReason |
1.3.6.1.4.1.4998.1.1.110.1.1.5.1.1 |
Reason why CM is considered to be impaired. Reason codes
with lower integer values take precedence over reason codes
with higher values if multiple reasons apply to the same CM.
The unknownMdDsSgId reason is used whenever the MD-DS-SG-ID
reported in the B-INIT-RNG-REQ message is 0 and the CMTS
cannot otherwise determine which downstream service group
the CM is contained within.
The unknownMdUsSgId reason is used whenever the MD-DS-SG-ID
is known for the CM but the MD-US-SG cannot be determined
by the topology resolution process. This reason may indicate
an undiagnosed connectivity problem in the cable network whereby
the true connectivity does not match the provisioned connectivity.
It may also indicate one or more corrupted upstream channels.
The badRcs reason indicates that the CM was unable to tune to
and receive a downstream channel that is assigned to the CM
in the RCC. This may indicate an undiagnosed connectivity problem
or a CM receiver problem.
The badTcs reason indicates that CM was unable to successfully
range on one or more upstream channels that were assigned to
the CM in the TCC. This reason may indicate an undiagnosed
connectivity problem in the cable network whereby the true
connectivity does not match the provisioned connectivity.
It may also indicate one or more corrupted upstream channels.
This reason may also indicate that the supervision for one or
more upstream channels cannot be found within the RCS.
The qamFecLockFailure reason indicates that the CM has reported
that one or more previously known good downstream channels
has lost FEC lock. This reason supercedes unknownMdDsSgId.
The t4Timeout indicates that the CM has reported that it has
experienced a timeout event for DOCSIS timer T4
(Periodic Ranging opportunities interval).
The t3Timeout reason indicates that the CM has reported that
it has exceeded the maximum number of consecutive timeouts
of timer T3 (ranging response timer).
The usStationMaintFailure indicates that C4 has detected that
CM is experiencing periodic ranging failure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qamFecLockFailure(100), plcFecLockFailure(130), ncpFecLockFailure(150), prof0FecLockFailure(170), unknownMdDsSgId(200), unknownMdUsSgId(300), badRcs(400), badTcs(500), t4Timeout(600), t3Timeout(700), usStationMaintFailure(900) |
|
cadCmtsCmRegImpairedLastRepairAttempt |
1.3.6.1.4.1.4998.1.1.110.1.1.5.1.3 |
Date and time when corrective action was
last attempted. If no action has not yet been attempted,
then this time should be the same as
cadCmtsCmRegImpairedFaultDetected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
cadCmtsCmRegImpairedLastRepairAction |
1.3.6.1.4.1.4998.1.1.110.1.1.5.1.4 |
Type of corrective action last attempted.
If no action has yet been attempted then
the value should be noAction. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
noAction(0), cmReset(1), dbcMessage(2), dccMessage(3) |
|
cadIf3CmtsCmUsStatusTable |
1.3.6.1.4.1.4998.1.1.110.1.1.6 |
This object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadIf3CmtsCmUsStatusEntry |
|
cadIf3CmtsCmUsStatusEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.6.1 |
The conceptual row of cadIf3CmtsCmUsStatusTable. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadIf3CmtsCmUsStatusEntry |
|
|
cadIf3CmtsCmUsStatusIsMuted |
1.3.6.1.4.1.4998.1.1.110.1.1.6.1.11 |
This attribute has a value 'true' to indicate that
the CM's upstream channel has been muted via
CM-CTRL-REQ/CM-CTRL-RSP message exchange. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
cadRccStatusTable |
1.3.6.1.4.1.4998.1.1.110.1.1.7 |
The RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for each unique
MAC Domain Cable Modem Service Group (MD-CM-SG) to
which it signals an RCC to the CM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadRccStatusEntry |
|
cadRccStatusEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1 |
The conceptual row of cadRccStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadRccStatusEntry |
|
|
cadRccStatusRcpId |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.1 |
This key represents the RCP-ID to which this instance
applies. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
RcpId |
|
|
cadRccStatusId |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.2 |
This key represents an RCC combination for a particular
RcpId either from an RCC configuration object
or a CMTS-determined RCC and is unique per combination
of MAC Domain IfIndex and RcpId. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..4294967295 |
|
cadRccStatusRccCfgId |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.3 |
This attribute identifies an RCC-Configured combination
from which this instance was defined. If nonzero,
it corresponds to the RccCfg instance from which
the RCC was created. Zero means that the RCC was dynamically
created by the CMTS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..65535 |
|
cadRccStatusValidityCode |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.4 |
This attribute indicates whether the RCC instance
of this object is valid or not. An RCC Status instance
from a configured or a dynamic RCC could become invalid,
for example, due changes in the topology. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), valid(2), invalid(3), wrongPrimaryDs(4), missingPrimaryDs(5), multiplePrimaryDs(6), duplicateDs(7), wrongFrequencyRange(8), wrongConnectivity(9) |
|
cadRccStatusValidityCodeText |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.5 |
This attribute contains the CMTS vendor-specific
log information from the Receive Channel Configuration
Status encoding. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
SnmpAdminString |
|
|
cadRccStatusDsChSetId |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.6 |
This object contains the ID for the downstream channel set used by this RCC.
It is only unique in association with a specific MAC domain. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ChSetId |
|
|
cadRccStatusChannelCount |
1.3.6.1.4.1.4998.1.1.110.1.1.7.1.7 |
This object provides the number of downstream channels provided by a modem using this RCC. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
cadIf3UsChSetTable |
1.3.6.1.4.1.4998.1.1.110.1.1.8 |
This object defines a set of upstream channels. These
channel sets may be associated with TCSID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadIf3UsChSetEntry |
|
cadIf3UsChSetEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.8.1 |
The conceptual row of cadIf3UsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the upstream channel set is defined. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadIf3UsChSetEntry |
|
|
cadIf3UsChIfIndex |
1.3.6.1.4.1.4998.1.1.110.1.1.8.1.1 |
This object is associated with an upstream channel ifIndex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
cadIf3DsChSetTable |
1.3.6.1.4.1.4998.1.1.110.1.1.9 |
This object defines a set of downstream channels. These
channel sets may be associated with RCSID. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadIf3DsChSetEntry |
|
cadIf3DsChSetEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.9.1 |
The conceptual row of cadIf3DsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the downstream channel set is defined. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadIf3DsChSetEntry |
|
|
cadIf3DsChIfIndex |
1.3.6.1.4.1.4998.1.1.110.1.1.9.1.1 |
This object is associated with an downstream channel ifIndex. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
InterfaceIndex |
|
|
cadIf3CsSummaryTable |
1.3.6.1.4.1.4998.1.1.110.1.1.10 |
This table contains counts of the modems using a particular upstream
or downstream channel set. It is used to construct |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CadIf3CsSummaryEntry |
|
cadIf3CsSummaryEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1 |
The conceptual row of the cadIf3CsSummary table that contains the
the count of modems using this channel set. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadIf3CsSummaryEntry |
|
|
cadIf3CsDir |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.1 |
The direction of the channel set associated with this modem count. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IfDirection |
|
|
cadIf3CsId |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.2 |
The channel set associated with this modem count. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ChSetId |
|
|
cadIf3CsNumOther |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.3 |
The number of modems on this channel set in state other(1) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumInitRanging |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.4 |
The number of modems on this channel set in state initialRanging(2) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRangingComplete |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.5 |
The number of modems on this channel set in state rangingAutoAdjComplete(4) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumStartEae |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.6 |
The number of modems on this channel set in state startEae(10) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumStartDhcpv4 |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.7 |
The number of modems on this channel set in state startDhcpv4(11) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumStartDhcpv6 |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.8 |
The number of modems on this channel set in state startDhcpv6(12) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumDhcpv4Complete |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.9 |
The number of modems on this channel set in state dhcpv4Complete(5) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumDhcpv6Complete |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.10 |
The number of modems on this channel set in state dhcpv6Complete(13) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumStartCfgFileDownload |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.11 |
The number of modems on this channel set in state startConfigFileDownload(14) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumStartRegistration |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.13 |
The number of modems on this channel set in state startRegistration(16) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRegistrationComplete |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.14 |
The number of modems on this channel set in state registrationComplete(6) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumOperational |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.15 |
The number of modems on this channel set in state operational(8) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumBpiInit |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.16 |
The number of modems on this channel set in state bpiInit(9) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumForwardingDisabled |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.17 |
The number of modems on this channel set in state forwardingDisabled(17) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRfMuteAll |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.18 |
The number of modems on this channel set in state rfMuteAll(18) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumTotal |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.19 |
The total count of cable modems on this channel set |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRangingAborted |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.20 |
The number of modems on this channel set in state rangingAborted(3) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRangFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.21 |
The number of times a CM on this channel set has reset in Ranging states. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumProvFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.22 |
The number of times a CM on this channel set has reset in Provisioning states. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3CsNumRegFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.10.1.23 |
The number of times a CM on this channel set has reset in Registered state. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumOther |
1.3.6.1.4.1.4998.1.1.110.1.1.11.3 |
The number of modems on this chassis in state other(1) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumInitRanging |
1.3.6.1.4.1.4998.1.1.110.1.1.11.4 |
The number of modems on this chassis in state initialRanging(2) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumRangingComplete |
1.3.6.1.4.1.4998.1.1.110.1.1.11.5 |
The number of modems on this chassis in state rangingAutoAdjComplete(4) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumStartEae |
1.3.6.1.4.1.4998.1.1.110.1.1.11.6 |
The number of modems on this chassis in state startEae(10) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumStartDhcpv4 |
1.3.6.1.4.1.4998.1.1.110.1.1.11.7 |
The number of modems on this chassis in state startDhcpv4(11) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumStartDhcpv6 |
1.3.6.1.4.1.4998.1.1.110.1.1.11.8 |
The number of modems on this chassis in state startDhcpv6(12) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumDhcpv4Complete |
1.3.6.1.4.1.4998.1.1.110.1.1.11.9 |
The number of modems on this chassis in state dhcpv4Complete(5) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumDhcpv6Complete |
1.3.6.1.4.1.4998.1.1.110.1.1.11.10 |
The number of modems on this chassis in state dhcpv6Complete(13) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumStartRegistration |
1.3.6.1.4.1.4998.1.1.110.1.1.11.13 |
The number of modems on this chassis in state startRegistration(16) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumOperational |
1.3.6.1.4.1.4998.1.1.110.1.1.11.15 |
The number of modems on this chassis in state operational(8) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumBpiInit |
1.3.6.1.4.1.4998.1.1.110.1.1.11.16 |
The number of modems on this chassis in state bpiInit(9) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumRfMuteAll |
1.3.6.1.4.1.4998.1.1.110.1.1.11.18 |
The number of modems on this chassis in state rfMuteAll(18) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumTotal |
1.3.6.1.4.1.4998.1.1.110.1.1.11.19 |
The total count of cable modems on this chassis |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumRangingAborted |
1.3.6.1.4.1.4998.1.1.110.1.1.11.20 |
The number of modems on this chassis in state rangingAborted(3) |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumRangFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.11.21 |
The number of times a CM on this chassis set has reset in a ranging state. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumProvFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.11.22 |
The number of times a CM on this chassis has reset in a provisioning state. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIf3ChsNumRegFlaps |
1.3.6.1.4.1.4998.1.1.110.1.1.11.23 |
The number of times a CM on this chassis has reset in a registered state. |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
cadIfCmtsCmFailedProfStatusEntry |
1.3.6.1.4.1.4998.1.1.110.1.1.12.1 |
A conceptual row containing information about the
CM impaired OFDM profile status. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CadIfCmtsCmFailedProfStatusEntry |
|
|
cadIfCmtsCmFailedProfId |
1.3.6.1.4.1.4998.1.1.110.1.1.12.1.3 |
The profile number of this profile plus one.
Profile IDs zero and 255 result in partial service,
not a partial channel condition, so they are not in
this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
2..16 |
|
cadIfCmtsCmFailedProfReason |
1.3.6.1.4.1.4998.1.1.110.1.1.12.1.4 |
Reason why a profile is considered to be impaired.
The lostFecLock reason is used when the CM sends a
DS OFDM profile failure CM-STATUS message for an OFDM
channel and profile. This is sent when the CM detects
excessive errors on a profile. For an OFDMA channel, it
indicates excessive errors in received packets from the CM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
INTEGER |
lostFecLock(300) |
|