CA-W2KOS-MIB

File: CA-W2KOS-MIB.mib (334400 bytes)

Imported modules

RFC-1215 RFC1155-SMI SNMPv2-TC

Imported symbols

TRAP-TYPE enterprises OBJECT-TYPE
DisplayString

Defined Types

W2kConfigLVolAutoRow  
SEQUENCE    
  w2kConfigLVolAutoWatcherName DisplayString
  w2kConfigLVolAutoName DisplayString
  w2kConfigLVolAutoDescription DisplayString
  w2kConfigLVolAutoAggLag INTEGER
  w2kConfigLVolAutoSizeWarn DisplayString
  w2kConfigLVolAutoSizeCrit DisplayString
  w2kConfigLVolAutoSizeMonitor INTEGER
  w2kConfigLVolAutoSizeDWarn DisplayString
  w2kConfigLVolAutoSizeDCrit DisplayString
  w2kConfigLVolAutoSizeDMonitor INTEGER
  w2kConfigLVolAutoTPutWarn INTEGER
  w2kConfigLVolAutoTPutCrit INTEGER
  w2kConfigLVolAutoTPutMonitor INTEGER
  w2kConfigLVolAutoFragWarn INTEGER
  w2kConfigLVolAutoFragCrit INTEGER
  w2kConfigLVolAutoFragMonitor INTEGER
  w2kConfigLVolAutoLossAction INTEGER
  w2kConfigLVolAutoButton INTEGER

W2kConfigMntAutoRow  
SEQUENCE    
  w2kConfigMntAutoWatcherName DisplayString
  w2kConfigMntAutoName DisplayString
  w2kConfigMntAutoDescription DisplayString
  w2kConfigMntAutoAggLag INTEGER
  w2kConfigMntAutoRelToMonitor INTEGER
  w2kConfigMntAutoLossAction INTEGER
  w2kConfigMntAutoButton INTEGER

W2kConfigDfsAutoRow  
SEQUENCE    
  w2kConfigDfsAutoWatcherName DisplayString
  w2kConfigDfsAutoName DisplayString
  w2kConfigDfsAutoDescription DisplayString
  w2kConfigDfsAutoAggLag INTEGER
  w2kConfigDfsAutoReplicaWarn INTEGER
  w2kConfigDfsAutoReplicaCrit INTEGER
  w2kConfigDfsAutoReplicaMonitor INTEGER
  w2kConfigDfsAutoLossAction INTEGER
  w2kConfigDfsAutoButton INTEGER

W2kConfigSrvcAutoRow  
SEQUENCE    
  w2kConfigSrvcAutoWatcherName DisplayString
  w2kConfigSrvcAutoName DisplayString
  w2kConfigSrvcAutoDescription DisplayString
  w2kConfigSrvcAutoAggLag INTEGER
  w2kConfigSrvcAutoExist INTEGER
  w2kConfigSrvcAutoExistMonitor INTEGER
  w2kConfigSrvcAutoActive INTEGER
  w2kConfigSrvcAutoActiveMonitor INTEGER
  w2kConfigSrvcAutoButton INTEGER

W2kConfigPrnAutoRow  
SEQUENCE    
  w2kConfigPrnAutoWatcherName DisplayString
  w2kConfigPrnAutoName DisplayString
  w2kConfigPrnAutoDescription DisplayString
  w2kConfigPrnAutoAggLag INTEGER
  w2kConfigPrnAutoEventMonitor INTEGER
  w2kConfigPrnAutoQueueWarn INTEGER
  w2kConfigPrnAutoQueueCrit INTEGER
  w2kConfigPrnAutoQueueMonitor INTEGER
  w2kConfigPrnAutoLossAction INTEGER
  w2kConfigPrnAutoButton INTEGER

W2kStatusCpuRow  
SEQUENCE    
  w2kStatusCpuName DisplayString
  w2kStatusCpuType DisplayString
  w2kStatusCpuAggStatus INTEGER
  w2kStatusCpuLoadValue INTEGER
  w2kStatusCpuLoadLagValue INTEGER
  w2kStatusCpuLoadLag INTEGER
  w2kStatusCpuLoadWarn INTEGER
  w2kStatusCpuLoadCrit INTEGER
  w2kStatusCpuLoadMonitor INTEGER
  w2kStatusCpuLoadStatus INTEGER
  w2kStatusCpuLossAction INTEGER
  w2kStatusCpuLossStatus INTEGER
  w2kStatusCpuCallBackRef DisplayString

W2kStatusLVolRow  
SEQUENCE    
  w2kStatusLVolName DisplayString
  w2kStatusLVolDescription DisplayString
  w2kStatusLVolMounts DisplayString
  w2kStatusLVolInfo DisplayString
  w2kStatusLVolAutoWatcherName DisplayString
  w2kStatusLVolAggLagValue INTEGER
  w2kStatusLVolAggLag INTEGER
  w2kStatusLVolAggStatus INTEGER
  w2kStatusLVolSizeTotal INTEGER
  w2kStatusLVolSizeValue INTEGER
  w2kStatusLVolSizeWarnValue INTEGER
  w2kStatusLVolSizeCritValue INTEGER
  w2kStatusLVolSizeWarn DisplayString
  w2kStatusLVolSizeCrit DisplayString
  w2kStatusLVolSizeMonitor INTEGER
  w2kStatusLVolSizeStatus INTEGER
  w2kStatusLVolSizeDValue INTEGER
  w2kStatusLVolSizeDWarnValue DisplayString
  w2kStatusLVolSizeDCritValue DisplayString
  w2kStatusLVolSizeDWarn DisplayString
  w2kStatusLVolSizeDCrit DisplayString
  w2kStatusLVolSizeDMonitor INTEGER
  w2kStatusLVolSizeDStatus INTEGER
  w2kStatusLVolTPutValue INTEGER
  w2kStatusLVolTPutWarn INTEGER
  w2kStatusLVolTPutCrit INTEGER
  w2kStatusLVolTPutMonitor INTEGER
  w2kStatusLVolTPutStatus INTEGER
  w2kStatusLVolFragValue INTEGER
  w2kStatusLVolFragWarn INTEGER
  w2kStatusLVolFragCrit INTEGER
  w2kStatusLVolFragMonitor INTEGER
  w2kStatusLVolFragStatus INTEGER
  w2kStatusLVolLossAction INTEGER
  w2kStatusLVolLossStatus INTEGER
  w2kStatusLVolCallBackRef DisplayString
  w2kStatusLVolButton INTEGER

W2kStatusMntRow  
SEQUENCE    
  w2kStatusMntName DisplayString
  w2kStatusMntDescription DisplayString
  w2kStatusMntAutoWatcherName DisplayString
  w2kStatusMntAggLagValue INTEGER
  w2kStatusMntAggLag INTEGER
  w2kStatusMntAggStatus INTEGER
  w2kStatusMntRelToValue DisplayString
  w2kStatusMntRelToRef DisplayString
  w2kStatusMntRelToMonitor INTEGER
  w2kStatusMntRelToStatus INTEGER
  w2kStatusMntLossAction INTEGER
  w2kStatusMntLossStatus INTEGER
  w2kStatusMntCallBackRef DisplayString
  w2kStatusMntButton INTEGER

W2kStatusDfsRow  
SEQUENCE    
  w2kStatusDfsName DisplayString
  w2kStatusDfsDescription DisplayString
  w2kStatusDfsIds DisplayString
  w2kStatusDfsAutoWatcherName DisplayString
  w2kStatusDfsAggLagValue INTEGER
  w2kStatusDfsAggLag INTEGER
  w2kStatusDfsAggStatus INTEGER
  w2kStatusDfsReplicaTotal INTEGER
  w2kStatusDfsReplicaValue INTEGER
  w2kStatusDfsReplicaWarn INTEGER
  w2kStatusDfsReplicaCrit INTEGER
  w2kStatusDfsReplicaMonitor INTEGER
  w2kStatusDfsReplicaStatus INTEGER
  w2kStatusDfsLossAction INTEGER
  w2kStatusDfsLossStatus INTEGER
  w2kStatusDfsCallBackRef DisplayString
  w2kStatusDfsButton INTEGER

W2kStatusQuotRow  
SEQUENCE    
  w2kStatusQuotLVolName DisplayString
  w2kStatusQuotUserName DisplayString
  w2kStatusQuotDescription DisplayString
  w2kStatusQuotAggLagValue INTEGER
  w2kStatusQuotAggLag INTEGER
  w2kStatusQuotAggStatus INTEGER
  w2kStatusQuotExist INTEGER
  w2kStatusQuotExistMonitor INTEGER
  w2kStatusQuotExistStatus INTEGER
  w2kStatusQuotSizeValue INTEGER
  w2kStatusQuotSizeWarn INTEGER
  w2kStatusQuotSizeCrit INTEGER
  w2kStatusQuotSizeMonitor INTEGER
  w2kStatusQuotSizeStatus INTEGER
  w2kStatusQuotCallBackRef DisplayString
  w2kStatusQuotButton INTEGER

W2kStatusDirRow  
SEQUENCE    
  w2kStatusDirName DisplayString
  w2kStatusDirDescription DisplayString
  w2kStatusDirAggLagValue INTEGER
  w2kStatusDirAggLag INTEGER
  w2kStatusDirAggStatus INTEGER
  w2kStatusDirExist INTEGER
  w2kStatusDirExistMonitor INTEGER
  w2kStatusDirExistStatus INTEGER
  w2kStatusDirTimeValue DisplayString
  w2kStatusDirTimeRef DisplayString
  w2kStatusDirTimeMonitor INTEGER
  w2kStatusDirTimeStatus INTEGER
  w2kStatusDirSizeRef INTEGER
  w2kStatusDirSizeValue INTEGER
  w2kStatusDirSizeWarnValue INTEGER
  w2kStatusDirSizeCritValue INTEGER
  w2kStatusDirSizeWarn DisplayString
  w2kStatusDirSizeCrit DisplayString
  w2kStatusDirSizeMonitor INTEGER
  w2kStatusDirSizeStatus INTEGER
  w2kStatusDirSizeDValue INTEGER
  w2kStatusDirSizeDWarnValue DisplayString
  w2kStatusDirSizeDCritValue DisplayString
  w2kStatusDirSizeDWarn DisplayString
  w2kStatusDirSizeDCrit DisplayString
  w2kStatusDirSizeDMonitor INTEGER
  w2kStatusDirSizeDStatus INTEGER
  w2kStatusDirEntryValue INTEGER
  w2kStatusDirEntryWarn INTEGER
  w2kStatusDirEntryCrit INTEGER
  w2kStatusDirEntryMonitor INTEGER
  w2kStatusDirEntryStatus INTEGER
  w2kStatusDirCallBackRef DisplayString
  w2kStatusDirButton INTEGER

W2kStatusFileRow  
SEQUENCE    
  w2kStatusFileName DisplayString
  w2kStatusFileDescription DisplayString
  w2kStatusFileAggLagValue INTEGER
  w2kStatusFileAggLag INTEGER
  w2kStatusFileAggStatus INTEGER
  w2kStatusFileExist INTEGER
  w2kStatusFileExistMonitor INTEGER
  w2kStatusFileExistStatus INTEGER
  w2kStatusFileTimeValue DisplayString
  w2kStatusFileTimeRef DisplayString
  w2kStatusFileTimeMonitor INTEGER
  w2kStatusFileTimeStatus INTEGER
  w2kStatusFileSizeRef INTEGER
  w2kStatusFileSizeValue INTEGER
  w2kStatusFileSizeWarnValue INTEGER
  w2kStatusFileSizeCritValue INTEGER
  w2kStatusFileSizeWarn DisplayString
  w2kStatusFileSizeCrit DisplayString
  w2kStatusFileSizeMonitor INTEGER
  w2kStatusFileSizeStatus INTEGER
  w2kStatusFileSizeDValue INTEGER
  w2kStatusFileSizeDWarnValue DisplayString
  w2kStatusFileSizeDCritValue DisplayString
  w2kStatusFileSizeDWarn DisplayString
  w2kStatusFileSizeDCrit DisplayString
  w2kStatusFileSizeDMonitor INTEGER
  w2kStatusFileSizeDStatus INTEGER
  w2kStatusFileCallBackRef DisplayString
  w2kStatusFileButton INTEGER

W2kStatusProcRow  
SEQUENCE    
  w2kStatusProcProcName DisplayString
  w2kStatusProcPathName DisplayString
  w2kStatusProcUserName DisplayString
  w2kStatusProcDescription DisplayString
  w2kStatusProcIds DisplayString
  w2kStatusProcAggLagValue INTEGER
  w2kStatusProcAggLag INTEGER
  w2kStatusProcAggStatus INTEGER
  w2kStatusProcInstValue INTEGER
  w2kStatusProcInstMin INTEGER
  w2kStatusProcInstMax INTEGER
  w2kStatusProcInstMonitor INTEGER
  w2kStatusProcInstStatus INTEGER
  w2kStatusProcChildMinValue INTEGER
  w2kStatusProcChildMaxValue INTEGER
  w2kStatusProcChildMin INTEGER
  w2kStatusProcChildMax INTEGER
  w2kStatusProcChildMonitor INTEGER
  w2kStatusProcChildStatus INTEGER
  w2kStatusProcThreadMinValue INTEGER
  w2kStatusProcThreadMaxValue INTEGER
  w2kStatusProcThreadMin INTEGER
  w2kStatusProcThreadMax INTEGER
  w2kStatusProcThreadMonitor INTEGER
  w2kStatusProcThreadStatus INTEGER
  w2kStatusProcMemoryValue INTEGER
  w2kStatusProcMemoryWarn INTEGER
  w2kStatusProcMemoryCrit INTEGER
  w2kStatusProcMemoryMonitor INTEGER
  w2kStatusProcMemoryStatus INTEGER
  w2kStatusProcCpuValue INTEGER
  w2kStatusProcCpuWarn INTEGER
  w2kStatusProcCpuCrit INTEGER
  w2kStatusProcCpuMonitor INTEGER
  w2kStatusProcCpuStatus INTEGER
  w2kStatusProcCallBackRef DisplayString
  w2kStatusProcButton INTEGER

W2kStatusSrvcRow  
SEQUENCE    
  w2kStatusSrvcName DisplayString
  w2kStatusSrvcDescription DisplayString
  w2kStatusSrvcDescr DisplayString
  w2kStatusSrvcAutoWatcherName DisplayString
  w2kStatusSrvcAggLagValue INTEGER
  w2kStatusSrvcAggLag INTEGER
  w2kStatusSrvcAggStatus INTEGER
  w2kStatusSrvcExist INTEGER
  w2kStatusSrvcExistMonitor INTEGER
  w2kStatusSrvcExistStatus INTEGER
  w2kStatusSrvcActiveValue INTEGER
  w2kStatusSrvcActive INTEGER
  w2kStatusSrvcActiveMonitor INTEGER
  w2kStatusSrvcActiveStatus INTEGER
  w2kStatusSrvcCallBackRef DisplayString
  w2kStatusSrvcButton INTEGER

W2kStatusJobRow  
SEQUENCE    
  w2kStatusJobName DisplayString
  w2kStatusJobDescription DisplayString
  w2kStatusJobAggLagValue INTEGER
  w2kStatusJobAggLag INTEGER
  w2kStatusJobAggStatus INTEGER
  w2kStatusJobExist INTEGER
  w2kStatusJobExistMonitor INTEGER
  w2kStatusJobExistStatus INTEGER
  w2kStatusJobProcessValue INTEGER
  w2kStatusJobProcessMin INTEGER
  w2kStatusJobProcessMax INTEGER
  w2kStatusJobProcessMonitor INTEGER
  w2kStatusJobProcessStatus INTEGER
  w2kStatusJobCpuValue INTEGER
  w2kStatusJobCpuWarn INTEGER
  w2kStatusJobCpuCrit INTEGER
  w2kStatusJobCpuMonitor INTEGER
  w2kStatusJobCpuStatus INTEGER
  w2kStatusJobCallBackRef DisplayString
  w2kStatusJobButton INTEGER

W2kStatusSessRow  
SEQUENCE    
  w2kStatusSessClientName DisplayString
  w2kStatusSessUserName DisplayString
  w2kStatusSessDescription DisplayString
  w2kStatusSessIds DisplayString
  w2kStatusSessAggLagValue INTEGER
  w2kStatusSessAggLag INTEGER
  w2kStatusSessAggStatus INTEGER
  w2kStatusSessInstValue INTEGER
  w2kStatusSessInstMin INTEGER
  w2kStatusSessInstMax INTEGER
  w2kStatusSessInstMonitor INTEGER
  w2kStatusSessInstStatus INTEGER
  w2kStatusSessMemoryValue INTEGER
  w2kStatusSessMemoryWarn INTEGER
  w2kStatusSessMemoryCrit INTEGER
  w2kStatusSessMemoryMonitor INTEGER
  w2kStatusSessMemoryStatus INTEGER
  w2kStatusSessCpuValue INTEGER
  w2kStatusSessCpuWarn INTEGER
  w2kStatusSessCpuCrit INTEGER
  w2kStatusSessCpuMonitor INTEGER
  w2kStatusSessCpuStatus INTEGER
  w2kStatusSessCallBackRef DisplayString
  w2kStatusSessButton INTEGER

W2kStatusPrnRow  
SEQUENCE    
  w2kStatusPrnName DisplayString
  w2kStatusPrnDescription DisplayString
  w2kStatusPrnAutoWatcherName DisplayString
  w2kStatusPrnAggLagValue INTEGER
  w2kStatusPrnAggLag INTEGER
  w2kStatusPrnAggStatus INTEGER
  w2kStatusPrnEventDescr INTEGER
  w2kStatusPrnEventMonitor INTEGER
  w2kStatusPrnEventStatus INTEGER
  w2kStatusPrnQueueValue INTEGER
  w2kStatusPrnQueueWarn INTEGER
  w2kStatusPrnQueueCrit INTEGER
  w2kStatusPrnQueueMonitor INTEGER
  w2kStatusPrnQueueStatus INTEGER
  w2kStatusPrnLossAction INTEGER
  w2kStatusPrnLossStatus INTEGER
  w2kStatusPrnCallBackRef DisplayString
  w2kStatusPrnButton INTEGER

W2kStatusNetRow  
SEQUENCE    
  w2kStatusNetName DisplayString
  w2kStatusNetAggLagValue INTEGER
  w2kStatusNetAggLag INTEGER
  w2kStatusNetAggStatus INTEGER
  w2kStatusNetInPktValue INTEGER
  w2kStatusNetInPktWarn INTEGER
  w2kStatusNetInPktCrit INTEGER
  w2kStatusNetInPktMonitor INTEGER
  w2kStatusNetInPktStatus INTEGER
  w2kStatusNetOutPktValue INTEGER
  w2kStatusNetOutPktWarn INTEGER
  w2kStatusNetOutPktCrit INTEGER
  w2kStatusNetOutPktMonitor INTEGER
  w2kStatusNetOutPktStatus INTEGER
  w2kStatusNetInErrDValue INTEGER
  w2kStatusNetInErrDWarn INTEGER
  w2kStatusNetInErrDCrit INTEGER
  w2kStatusNetInErrDMonitor INTEGER
  w2kStatusNetInErrDStatus INTEGER
  w2kStatusNetOutErrDValue INTEGER
  w2kStatusNetOutErrDWarn INTEGER
  w2kStatusNetOutErrDCrit INTEGER
  w2kStatusNetOutErrDMonitor INTEGER
  w2kStatusNetOutErrDStatus INTEGER
  w2kStatusNetLossAction INTEGER
  w2kStatusNetLossStatus INTEGER
  w2kStatusNetCallBackRef DisplayString

W2kStatusRegRow  
SEQUENCE    
  w2kStatusRegName DisplayString
  w2kStatusRegDescription DisplayString
  w2kStatusRegAggLagValue INTEGER
  w2kStatusRegAggLag INTEGER
  w2kStatusRegAggStatus INTEGER
  w2kStatusRegExist INTEGER
  w2kStatusRegExistMonitor INTEGER
  w2kStatusRegExistStatus INTEGER
  w2kStatusRegValueValue DisplayString
  w2kStatusRegValueType INTEGER
  w2kStatusRegValueRef DisplayString
  w2kStatusRegValueCond INTEGER
  w2kStatusRegValueMonitor INTEGER
  w2kStatusRegValueStatus INTEGER
  w2kStatusRegCallBackRef DisplayString
  w2kStatusRegButton INTEGER

W2kAvailLVolRow  
SEQUENCE    
  w2kAvailLVolName DisplayString
  w2kAvailLVolMounts DisplayString
  w2kAvailLVolInfo DisplayString
  w2kAvailLVolTime DisplayString

W2kAvailMntRow  
SEQUENCE    
  w2kAvailMntName DisplayString
  w2kAvailMntRelTo DisplayString
  w2kAvailMntTime DisplayString

W2kAvailDfsRow  
SEQUENCE    
  w2kAvailDfsName DisplayString
  w2kAvailDfsTime DisplayString

W2kAvailQuotRow  
SEQUENCE    
  w2kAvailQuotLVolName DisplayString
  w2kAvailQuotUserName DisplayString
  w2kAvailQuotWarnLevel INTEGER
  w2kAvailQuotLimit INTEGER
  w2kAvailQuotTime DisplayString

W2kAvailProcRow  
SEQUENCE    
  w2kAvailProcProcName DisplayString
  w2kAvailProcPathName DisplayString
  w2kAvailProcUserName DisplayString
  w2kAvailProcTime DisplayString

W2kAvailSrvcRow  
SEQUENCE    
  w2kAvailSrvcName DisplayString
  w2kAvailSrvcDescr DisplayString
  w2kAvailSrvcTime DisplayString

W2kAvailJobRow  
SEQUENCE    
  w2kAvailJobName DisplayString
  w2kAvailJobTime DisplayString

W2kAvailSessRow  
SEQUENCE    
  w2kAvailSessClientName DisplayString
  w2kAvailSessUserName DisplayString
  w2kAvailSessTime DisplayString

W2kAvailPrnRow  
SEQUENCE    
  w2kAvailPrnName DisplayString
  w2kAvailPrnTime DisplayString

W2kHistoryRow  
SEQUENCE    
  w2kHistoryTrapName DisplayString
  w2kHistoryTrapNumber INTEGER
  w2kHistoryTrapTime DisplayString
  w2kHistoryTrapVarBind DisplayString

Defined Values

cai 1.3.6.1.4.1.791
OBJECT IDENTIFIER    

caiSysMgr 1.3.6.1.4.1.791.2
OBJECT IDENTIFIER    

tng 1.3.6.1.4.1.791.2.10
OBJECT IDENTIFIER    

agents 1.3.6.1.4.1.791.2.10.2
OBJECT IDENTIFIER    

caiW2kOs 1.3.6.1.4.1.791.2.10.2.43
OBJECT IDENTIFIER    

w2kConfigGroup 1.3.6.1.4.1.791.2.10.2.43.1
OBJECT IDENTIFIER    

w2kStatusGroup 1.3.6.1.4.1.791.2.10.2.43.2
OBJECT IDENTIFIER    

w2kAvailableGroup 1.3.6.1.4.1.791.2.10.2.43.3
OBJECT IDENTIFIER    

w2kHistoryGroup 1.3.6.1.4.1.791.2.10.2.43.4
OBJECT IDENTIFIER    

w2kConfigGeneralGroup 1.3.6.1.4.1.791.2.10.2.43.1.1
OBJECT IDENTIFIER    

w2kConfigSysGroup 1.3.6.1.4.1.791.2.10.2.43.1.2
OBJECT IDENTIFIER    

w2kConfigCpuGroup 1.3.6.1.4.1.791.2.10.2.43.1.3
OBJECT IDENTIFIER    

w2kConfigMemGroup 1.3.6.1.4.1.791.2.10.2.43.1.4
OBJECT IDENTIFIER    

w2kConfigLVolGroup 1.3.6.1.4.1.791.2.10.2.43.1.5
OBJECT IDENTIFIER    

w2kConfigMntGroup 1.3.6.1.4.1.791.2.10.2.43.1.6
OBJECT IDENTIFIER    

w2kConfigDfsGroup 1.3.6.1.4.1.791.2.10.2.43.1.7
OBJECT IDENTIFIER    

w2kConfigQuotGroup 1.3.6.1.4.1.791.2.10.2.43.1.8
OBJECT IDENTIFIER    

w2kConfigDirGroup 1.3.6.1.4.1.791.2.10.2.43.1.9
OBJECT IDENTIFIER    

w2kConfigFileGroup 1.3.6.1.4.1.791.2.10.2.43.1.10
OBJECT IDENTIFIER    

w2kConfigProcGroup 1.3.6.1.4.1.791.2.10.2.43.1.11
OBJECT IDENTIFIER    

w2kConfigSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.1.12
OBJECT IDENTIFIER    

w2kConfigJobGroup 1.3.6.1.4.1.791.2.10.2.43.1.13
OBJECT IDENTIFIER    

w2kConfigSessGroup 1.3.6.1.4.1.791.2.10.2.43.1.14
OBJECT IDENTIFIER    

w2kConfigPrnGroup 1.3.6.1.4.1.791.2.10.2.43.1.15
OBJECT IDENTIFIER    

w2kConfigNetGroup 1.3.6.1.4.1.791.2.10.2.43.1.16
OBJECT IDENTIFIER    

w2kConfigRegGroup 1.3.6.1.4.1.791.2.10.2.43.1.17
OBJECT IDENTIFIER    

w2kStatusGeneralGroup 1.3.6.1.4.1.791.2.10.2.43.2.1
OBJECT IDENTIFIER    

w2kStatusCpuGroup 1.3.6.1.4.1.791.2.10.2.43.2.2
OBJECT IDENTIFIER    

w2kStatusMemGroup 1.3.6.1.4.1.791.2.10.2.43.2.3
OBJECT IDENTIFIER    

w2kStatusLVolGroup 1.3.6.1.4.1.791.2.10.2.43.2.4
OBJECT IDENTIFIER    

w2kStatusMntGroup 1.3.6.1.4.1.791.2.10.2.43.2.5
OBJECT IDENTIFIER    

w2kStatusDfsGroup 1.3.6.1.4.1.791.2.10.2.43.2.6
OBJECT IDENTIFIER    

w2kStatusQuotGroup 1.3.6.1.4.1.791.2.10.2.43.2.7
OBJECT IDENTIFIER    

w2kStatusDirGroup 1.3.6.1.4.1.791.2.10.2.43.2.8
OBJECT IDENTIFIER    

w2kStatusFileGroup 1.3.6.1.4.1.791.2.10.2.43.2.9
OBJECT IDENTIFIER    

w2kStatusProcGroup 1.3.6.1.4.1.791.2.10.2.43.2.10
OBJECT IDENTIFIER    

w2kStatusSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.2.11
OBJECT IDENTIFIER    

w2kStatusJobGroup 1.3.6.1.4.1.791.2.10.2.43.2.12
OBJECT IDENTIFIER    

w2kStatusSessGroup 1.3.6.1.4.1.791.2.10.2.43.2.13
OBJECT IDENTIFIER    

w2kStatusPrnGroup 1.3.6.1.4.1.791.2.10.2.43.2.14
OBJECT IDENTIFIER    

w2kStatusNetGroup 1.3.6.1.4.1.791.2.10.2.43.2.15
OBJECT IDENTIFIER    

w2kStatusRegGroup 1.3.6.1.4.1.791.2.10.2.43.2.16
OBJECT IDENTIFIER    

w2kAvailLVolGroup 1.3.6.1.4.1.791.2.10.2.43.3.1
OBJECT IDENTIFIER    

w2kAvailMntGroup 1.3.6.1.4.1.791.2.10.2.43.3.2
OBJECT IDENTIFIER    

w2kAvailDfsGroup 1.3.6.1.4.1.791.2.10.2.43.3.3
OBJECT IDENTIFIER    

w2kAvailQuotGroup 1.3.6.1.4.1.791.2.10.2.43.3.4
OBJECT IDENTIFIER    

w2kAvailProcGroup 1.3.6.1.4.1.791.2.10.2.43.3.5
OBJECT IDENTIFIER    

w2kAvailSrvcGroup 1.3.6.1.4.1.791.2.10.2.43.3.6
OBJECT IDENTIFIER    

w2kAvailJobGroup 1.3.6.1.4.1.791.2.10.2.43.3.7
OBJECT IDENTIFIER    

w2kAvailSessGroup 1.3.6.1.4.1.791.2.10.2.43.3.8
OBJECT IDENTIFIER    

w2kAvailPrnGroup 1.3.6.1.4.1.791.2.10.2.43.3.9
OBJECT IDENTIFIER    

w2kConfigGeneralAgentVersion 1.3.6.1.4.1.791.2.10.2.43.1.1.1
&The currently installed version of the agent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralColdStartTime 1.3.6.1.4.1.791.2.10.2.43.1.1.2
&The date and time that the agent was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralWarmStartTime 1.3.6.1.4.1.791.2.10.2.43.1.1.3
&The date and time that the agent's configuration was last changed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralCpuPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.4
&The date and time that the agent last polled the processor information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralMemPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.5
&The date and time that the agent last polled the memory information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralLVolPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.6
&The date and time that the agent last polled the logical volume information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralMntPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.7
&The date and time that the agent last polled the mounts information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralDfsPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.8
&The date and time that the agent last polled the distributed file system link information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralQuotPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.9
&The date and time that the agent last polled the quota information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralDirPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.10
&The date and time that the agent last polled the directory information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralFilePollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.11
&The date and time that the agent last polled the file information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralProcPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.12
&The date and time that the agent last polled the process information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralSrvcPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.13
&The date and time that the agent last polled the service information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralJobPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.14
&The date and time that the agent last polled the job information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralSessPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.15
&The date and time that the agent last polled the session information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralPrnPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.16
&The date and time that the agent last polled the printer information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralNetPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.17
&The date and time that the agent last polled the network interface information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigGeneralRegPollTime 1.3.6.1.4.1.791.2.10.2.43.1.1.18
&The date and time that the agent last polled the registry entry information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigSysNodeName 1.3.6.1.4.1.791.2.10.2.43.1.2.1
&The node name of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigSysVersion 1.3.6.1.4.1.791.2.10.2.43.1.2.2
&The OS version (build, service pack, etc.) of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigSysBios 1.3.6.1.4.1.791.2.10.2.43.1.2.3
&The BIOS version (date, revision, etc.) of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigSysColdStartTime 1.3.6.1.4.1.791.2.10.2.43.1.2.4
&The date and time that the system was last started.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigCpuPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.3.1
&The time (in seconds) between the polling of the processor information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.3.2
&If set to 'disabled', the agent no more retrieves the processor information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigCpuLoadLag 1.3.6.1.4.1.791.2.10.2.43.1.3.3
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadWarn 1.3.6.1.4.1.791.2.10.2.43.1.3.4
&Warning threshold for the utilization of the processor (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadCrit 1.3.6.1.4.1.791.2.10.2.43.1.3.5
&Critical threshold for the utilization of the processor (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigCpuLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.1.3.6
&Flag indicating whether the utilization of the processor should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigCpuLossAction 1.3.6.1.4.1.791.2.10.2.43.1.3.7
&Flag defining the severity if the loss of the processor is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMemPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.4.1
&The time (in seconds) between the polling of the memory information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigMemPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.4.2
&If set to 'disabled', the agent no more retrieves the memory information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigLVolPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.1
&The time (in seconds) between the polling of the logical volume information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.5.2
&If set to 'disabled', the agent no more retrieves the logical volume information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigLVolAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of logical volumes will no more be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.5.4
&The time (in hours), when the fragmentation determination of the watched logical volumes is started again (triggered by the next polling or a get request). The agent will not determine the fragmentation every standard poll interval, because it is a long lasting task. Valid values are greater than or equal to 1 or set to -1. After a set on this attribute, the fragmentation determination will be started new by the next polling or by a get request. If set to -1, the fragmentation is no more polled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolName 1.3.6.1.4.1.791.2.10.2.43.1.5.5
&Name of the watcher to be added/removed, monitoring a logical volume with this name. If adding an auto discovery watcher, this name can be a wildcarded logical volume name filtering the logical volumes to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered logical volume a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolDescription 1.3.6.1.4.1.791.2.10.2.43.1.5.6
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAggLag 1.3.6.1.4.1.791.2.10.2.43.1.5.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.8
&Warning threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.9
&Critical threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.10
&Flag indicating whether the used logical volume size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.11
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.12
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.13
&Flag indicating whether the delta in used logical volume size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolTPutWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.14
&Warning threshold for the throughput rate (kilobytes per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolTPutCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.15
&Critical threshold for the throughput rate (kilobytes per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.16
&Flag indicating whether the throughput rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolFragWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.17
&Warning threshold for the file fragmentation (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.18
&Critical threshold for the file fragmentation (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolFragMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.19
&Flag indicating whether the file fragmentation should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolLossAction 1.3.6.1.4.1.791.2.10.2.43.1.5.20
&Flag defining the severity if the loss of the logical volume is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigLVolAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.5.21
&Name of the watcher to be added in the auto discovery table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolButton 1.3.6.1.4.1.791.2.10.2.43.1.5.22
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigLVolAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.5.23
&A table containing all auto discovery watchers for logical volumes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigLVolAutoRow

w2kConfigLVolAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kConfigLVolAutoRow  

w2kConfigLVolAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.1
&Name of the auto discovery watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoName 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.2
&Wildcarded logical volume name filtering the logical volumes to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered logical volume a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.3
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.4
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.5
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.6
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.7
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.8
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.9
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigLVolAutoSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.10
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoTPutWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.11
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoTPutCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.12
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.13
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoFragWarn 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.14
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoFragCrit 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.15
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigLVolAutoFragMonitor 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.16
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigLVolAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.17
&Default for auto discovered logical volumes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigLVolAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.5.23.1.18
&This attribute is used to remove this auto discovery watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigMntPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.6.1
&The time (in seconds) between the polling of the mount information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigMntPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.6.2
&If set to 'disabled', the agent no more retrieves the mount information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigMntAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.6.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of mounts will no more be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigMntName 1.3.6.1.4.1.791.2.10.2.43.1.6.4
&Name of the watcher to be added/removed, monitoring a mount with this name. If adding an auto discovery watcher, this name can be a wildcarded mount name filtering the mounts to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered mount a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigMntDescription 1.3.6.1.4.1.791.2.10.2.43.1.6.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAggLag 1.3.6.1.4.1.791.2.10.2.43.1.6.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigMntRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.1.6.7
&Flag indicating whether a change of the logical volume, mounted by this mount, should be monitored and if so, the level of alert to raise. Note: A change will not occur if the related logical volume is lossed. In that case the mount itself becomes lossed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigMntLossAction 1.3.6.1.4.1.791.2.10.2.43.1.6.8
&Flag defining the severity if the loss of the mount is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMntAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.6.9
&Name of the watcher to be added in the auto discovery table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigMntButton 1.3.6.1.4.1.791.2.10.2.43.1.6.10
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigMntAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.6.11
&A table containing all auto discovery watchers for mounts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigMntAutoRow

w2kConfigMntAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kConfigMntAutoRow  

w2kConfigMntAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.1
&Name of the auto discovery watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoName 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.2
&Wildcarded mount name filtering the mounts to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered mount a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.3
&Default for auto discovered mounts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigMntAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.4
&Default for auto discovered mounts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigMntAutoRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.5
&Default for auto discovered mounts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigMntAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.6
&Default for auto discovered mounts.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigMntAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.6.11.1.9
&This attribute is used to remove this auto discovery watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigDfsPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.7.1
&The time (in seconds) between the polling of the distributed file system link information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.7.2
&If set to 'disabled', the agent no more retrieves the distributed file system link information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigDfsAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.7.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of distributed file system links will no more be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsName 1.3.6.1.4.1.791.2.10.2.43.1.7.4
&Name of the watcher to be added/removed, monitoring a distributed file system link with this name. The name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. The single Dfs root name (without '\DfsLinkName') can also be used as watcher name, to be able to monitor all Dfs links of a Dfs root. In that case no loss action will be triggered if no Dfs link exists. If adding an auto discovery watcher, this name can be a wildcarded Dfs link name filtering the Dfs links to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered Dfs link a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsDescription 1.3.6.1.4.1.791.2.10.2.43.1.7.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAggLag 1.3.6.1.4.1.791.2.10.2.43.1.7.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.1.7.7
&Warning threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.1.7.8
&Critical threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.1.7.9
&Flag indicating whether the unavailable replicas should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDfsLossAction 1.3.6.1.4.1.791.2.10.2.43.1.7.10
&Flag defining the severity if the loss of the distributed file system link is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigDfsAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.7.11
&Name of the watcher to be added in the auto discovery table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsButton 1.3.6.1.4.1.791.2.10.2.43.1.7.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigDfsAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.7.13
&A table containing all auto discovery watchers for distributed file system links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigDfsAutoRow

w2kConfigDfsAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kConfigDfsAutoRow  

w2kConfigDfsAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.1
&Name of the auto discovery watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoName 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.2
&Wildcarded distributed file system link name filtering the Dfs links to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered Dfs link a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.3
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDfsAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.4
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.5
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.6
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDfsAutoReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.7
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDfsAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.8
&Default for auto discovered distributed file system links.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigDfsAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.7.13.1.9
&This attribute is used to remove this auto discovery watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigQuotPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.8.1
&The time (in seconds) between the polling of the quota information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.8.2
&If set to 'disabled', the agent no more retrieves the quota information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.1.8.3
&Logical volume name of the watcher to be added/removed, monitoring a quota with this logical volume name. The name specifies the logical volume on which this quota exists. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotUserName 1.3.6.1.4.1.791.2.10.2.43.1.8.4
&User name of the watcher to be added/removed, monitoring a quota with this user name. The name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotDescription 1.3.6.1.4.1.791.2.10.2.43.1.8.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigQuotAggLag 1.3.6.1.4.1.791.2.10.2.43.1.8.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotExist 1.3.6.1.4.1.791.2.10.2.43.1.8.7
&Flag indicating whether to raise an alert if a quota is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigQuotExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.8.8
&Flag indicating whether the existence of the quota should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigQuotSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.8.9
&Warning threshold for the used quota size in kilobytes. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.8.10
&Critical threshold for the used quota size in kilobytes. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigQuotSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.8.11
&Flag indicating whether the used quota size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigQuotButton 1.3.6.1.4.1.791.2.10.2.43.1.8.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigDirPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.9.1
&The time (in seconds) between the polling of the directory information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDirPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.9.2
&If set to 'disabled', the agent no more retrieves the directory information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigDirName 1.3.6.1.4.1.791.2.10.2.43.1.9.3
&Name of the watcher to be added/removed, monitoring a directory with this name. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirDescription 1.3.6.1.4.1.791.2.10.2.43.1.9.4
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirAggLag 1.3.6.1.4.1.791.2.10.2.43.1.9.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDirExist 1.3.6.1.4.1.791.2.10.2.43.1.9.6
&Flag indicating whether to raise an alert if a directory is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigDirExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.7
&Flag indicating whether the existence of the directory should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigDirTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.8
&Flag indicating whether the latest timestamp (of all files and all subfolders, including the given folder) should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigDirSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.9
&Warning threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.10
&Critical threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.11
&Flag indicating whether the total directory size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.12
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.13
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigDirSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.14
&Flag indicating whether the delta in total directory size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirEntryWarn 1.3.6.1.4.1.791.2.10.2.43.1.9.15
&Warning threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDirEntryCrit 1.3.6.1.4.1.791.2.10.2.43.1.9.16
&Critical threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigDirEntryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.9.17
&Flag indicating whether the number of entries should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigDirButton 1.3.6.1.4.1.791.2.10.2.43.1.9.18
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigFilePollInterval 1.3.6.1.4.1.791.2.10.2.43.1.10.1
&The time (in seconds) between the polling of the file information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigFilePollMethod 1.3.6.1.4.1.791.2.10.2.43.1.10.2
&If set to 'disabled', the agent no more retrieves the file information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigFileName 1.3.6.1.4.1.791.2.10.2.43.1.10.3
&Name of the watcher to be added/removed, monitoring a file with this name. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileDescription 1.3.6.1.4.1.791.2.10.2.43.1.10.4
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileAggLag 1.3.6.1.4.1.791.2.10.2.43.1.10.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigFileExist 1.3.6.1.4.1.791.2.10.2.43.1.10.6
&Flag indicating whether to raise an alert if a file is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigFileExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.7
&Flag indicating whether the existence of the file should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigFileTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.8
&Flag indicating whether the timestamp of the file should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigFileSizeWarn 1.3.6.1.4.1.791.2.10.2.43.1.10.9
&Warning threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeCrit 1.3.6.1.4.1.791.2.10.2.43.1.10.10
&Critical threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.11
&Flag indicating whether the file size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigFileSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.1.10.12
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.1.10.13
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigFileSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.10.14
&Flag indicating whether the delta in file size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigFileButton 1.3.6.1.4.1.791.2.10.2.43.1.10.15
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigProcPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.11.1
&The time (in seconds) between the polling of the process information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.11.2
&If set to 'disabled', the agent no more retrieves the process information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigProcProcName 1.3.6.1.4.1.791.2.10.2.43.1.11.3
&Process name of the watcher to be added/removed, monitoring a process with this process name. An asterisk '*' can be used as process name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigProcPathName 1.3.6.1.4.1.791.2.10.2.43.1.11.4
&Path name of the watcher to be added/removed, monitoring a process with this path name. An asterisk '*' can be used as path name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigProcUserName 1.3.6.1.4.1.791.2.10.2.43.1.11.5
&User name of the watcher to be added/removed, monitoring a process started by this user. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigProcDescription 1.3.6.1.4.1.791.2.10.2.43.1.11.6
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigProcAggLag 1.3.6.1.4.1.791.2.10.2.43.1.11.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMin 1.3.6.1.4.1.791.2.10.2.43.1.11.8
&Minimum threshold for the number of process instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMax 1.3.6.1.4.1.791.2.10.2.43.1.11.9
&Maximum threshold for the number of process instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcInstMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.10
&Flag indicating whether the number of process instances should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcChildMin 1.3.6.1.4.1.791.2.10.2.43.1.11.11
&Minimum threshold for the number of childprocesses of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcChildMax 1.3.6.1.4.1.791.2.10.2.43.1.11.12
&Maximum threshold for the number of childprocesses of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcChildMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.13
&Flag indicating whether the number of childprocesses of the process should be monitored and if so, the level of alert to raise. Note: This metric decreases agent performance much more than any other metric. For this reason the default is 'do-not-monitor'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcThreadMin 1.3.6.1.4.1.791.2.10.2.43.1.11.14
&Minimum threshold for the number of threads of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcThreadMax 1.3.6.1.4.1.791.2.10.2.43.1.11.15
&Maximum threshold for the number of threads of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcThreadMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.16
&Flag indicating whether the number of threads of the process should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigProcMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.1.11.17
&Warning threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.1.11.18
&Critical threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.19
&Flag indicating whether the memory usage of the process should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigProcCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.11.20
&Warning threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.11.21
&Critical threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigProcCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.11.22
&Flag indicating whether the CPU usage of the process should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigProcButton 1.3.6.1.4.1.791.2.10.2.43.1.11.23
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigSrvcPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.12.1
&The time (in seconds) between the polling of the service information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.12.2
&If set to 'disabled', the agent no more retrieves the service information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigSrvcAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.12.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of services will no more be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcName 1.3.6.1.4.1.791.2.10.2.43.1.12.4
&Name of the watcher to be added/removed, monitoring a service with this name. If adding an auto discovery watcher, this name can be a wildcarded service name filtering the services to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered service a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcDescription 1.3.6.1.4.1.791.2.10.2.43.1.12.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAggLag 1.3.6.1.4.1.791.2.10.2.43.1.12.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcExist 1.3.6.1.4.1.791.2.10.2.43.1.12.7
&Flag indicating whether to raise an alert if a service is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigSrvcExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.8
&Flag indicating whether the existence of the service should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcActive 1.3.6.1.4.1.791.2.10.2.43.1.12.9
&Flag indicating whether to raise an alert if an existent service is active or if it is inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kConfigSrvcActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.10
&Flag indicating whether the activity of the service should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.12.11
&Name of the watcher to be added in the auto discovery table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcButton 1.3.6.1.4.1.791.2.10.2.43.1.12.12
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigSrvcAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.12.13
&A table containing all auto discovery watchers for services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigSrvcAutoRow

w2kConfigSrvcAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kConfigSrvcAutoRow  

w2kConfigSrvcAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.1
&Name of the auto discovery watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoName 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.2
&Wildcarded service name filtering the services to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered service a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.3
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSrvcAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.4
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSrvcAutoExist 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.5
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigSrvcAutoExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.6
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoActive 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.7
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kConfigSrvcAutoActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.8
&Default for auto discovered services.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSrvcAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.12.13.1.9
&This attribute is used to remove this auto discovery watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigJobPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.13.1
&The time (in seconds) between the polling of the job information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.13.2
&If set to 'disabled', the agent no more retrieves the job information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigJobName 1.3.6.1.4.1.791.2.10.2.43.1.13.3
&Name of the watcher to be added/removed, monitoring a job with this name. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigJobDescription 1.3.6.1.4.1.791.2.10.2.43.1.13.4
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigJobAggLag 1.3.6.1.4.1.791.2.10.2.43.1.13.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobExist 1.3.6.1.4.1.791.2.10.2.43.1.13.6
&Flag indicating whether to raise an alert if a job is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigJobExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.7
&Flag indicating whether the existence of the job should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigJobProcessMin 1.3.6.1.4.1.791.2.10.2.43.1.13.8
&Minimum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobProcessMax 1.3.6.1.4.1.791.2.10.2.43.1.13.9
&Maximum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobProcessMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.10
&Flag indicating whether the number of active processes associated with the job should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigJobCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.13.11
&Warning threshold for the CPU usage of the job (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.13.12
&Critical threshold for the CPU usage of the job (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigJobCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.13.13
&Flag indicating whether the CPU usage of the job should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigJobButton 1.3.6.1.4.1.791.2.10.2.43.1.13.14
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigSessPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.14.1
&The time (in seconds) between the polling of the session information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.14.2
&If set to 'disabled', the agent no more retrieves the session information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigSessClientName 1.3.6.1.4.1.791.2.10.2.43.1.14.3
&Client name of the watcher to be added/removed, monitoring a session with this client name. The client name is the name of the host, from where this session was initiated. An asterisk '*' can be used as client name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSessUserName 1.3.6.1.4.1.791.2.10.2.43.1.14.4
&User name of the watcher to be added/removed, monitoring a session with this user name. The user name specifies the user, who logged in and is in the form 'domainName\userName'. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSessDescription 1.3.6.1.4.1.791.2.10.2.43.1.14.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigSessAggLag 1.3.6.1.4.1.791.2.10.2.43.1.14.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMin 1.3.6.1.4.1.791.2.10.2.43.1.14.7
&Minimum threshold for the number of session instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMax 1.3.6.1.4.1.791.2.10.2.43.1.14.8
&Maximum threshold for the number of session instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessInstMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.9
&Flag indicating whether the number of session instances should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigSessMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.1.14.10
&Warning threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.1.14.11
&Critical threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.12
&Flag indicating whether the memory usage of the session should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigSessCpuWarn 1.3.6.1.4.1.791.2.10.2.43.1.14.13
&Warning threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessCpuCrit 1.3.6.1.4.1.791.2.10.2.43.1.14.14
&Critical threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigSessCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.1.14.15
&Flag indicating whether the CPU usage of the session should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigSessButton 1.3.6.1.4.1.791.2.10.2.43.1.14.16
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kConfigPrnPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.15.1
&The time (in seconds) between the polling of the printer information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.15.2
&If set to 'disabled', the agent no more retrieves the printer information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigPrnAutoPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.15.3
&The time (in minutes), when a new auto discovery process is started. Valid values are greater than or equal to 30 or set to -1. If set to -1, auto discovery of printers will no more be made.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnName 1.3.6.1.4.1.791.2.10.2.43.1.15.4
&Name of the watcher to be added/removed, monitoring a local printer with this name. If adding an auto discovery watcher, this name can be a wildcarded printer name filtering the printers to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered printer a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnDescription 1.3.6.1.4.1.791.2.10.2.43.1.15.5
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAggLag 1.3.6.1.4.1.791.2.10.2.43.1.15.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnEventMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.7
&Flag indicating whether the occurence of printer events should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigPrnQueueWarn 1.3.6.1.4.1.791.2.10.2.43.1.15.8
&Warning threshold for the number of jobs in the printer's queue. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnQueueCrit 1.3.6.1.4.1.791.2.10.2.43.1.15.9
&Critical threshold for the number of jobs in the printer's queue. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.10
&Flag indicating whether the printer's job queue should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigPrnLossAction 1.3.6.1.4.1.791.2.10.2.43.1.15.11
&Flag defining the severity if the loss of the printer is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigPrnAutoTableWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.15.12
&Name of the watcher to be added in the auto discovery table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnButton 1.3.6.1.4.1.791.2.10.2.43.1.15.13
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group, or to add or remove an auto discovery watcher with the current value of the auto table watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3), add-auto(4), remove-auto(5)  

w2kConfigPrnAutoTable 1.3.6.1.4.1.791.2.10.2.43.1.15.14
&A table containing all auto discovery watchers for printers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kConfigPrnAutoRow

w2kConfigPrnAutoEntry 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kConfigPrnAutoRow  

w2kConfigPrnAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.1
&Name of the auto discovery watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoName 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.2
&Wildcarded printer name filtering the printers to be auto discovered (any backslash in the wildcarded name must be doubled). For each auto discovered printer a watcher will be created. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoDescription 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.3
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigPrnAutoAggLag 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.4
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoEventMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.5
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigPrnAutoQueueWarn 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.6
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoQueueCrit 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.7
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigPrnAutoQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.8
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigPrnAutoLossAction 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.9
&Default for auto discovered printers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigPrnAutoButton 1.3.6.1.4.1.791.2.10.2.43.1.15.14.1.10
&This attribute is used to remove this auto discovery watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kConfigNetPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.16.1
&The time (in seconds) between the polling of the network interface information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.16.2
&If set to 'disabled', the agent no more retrieves the network interface information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigNetAggLag 1.3.6.1.4.1.791.2.10.2.43.1.16.3
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.4
&Warning threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.5
&Critical threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.6
&Flag indicating whether the received packets rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.7
&Warning threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.8
&Critical threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.9
&Flag indicating whether the sent packets rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.10
&Warning threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.11
&Critical threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.12
&Flag indicating whether the received errors rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.1.16.13
&Warning threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.1.16.14
&Critical threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigNetOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.1.16.15
&Flag indicating whether the sent errors rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kConfigNetLossAction 1.3.6.1.4.1.791.2.10.2.43.1.16.16
&Flag defining the severity if the loss of the network interface is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kConfigRegPollInterval 1.3.6.1.4.1.791.2.10.2.43.1.17.1
&The time (in seconds) between the polling of the registry entry information. Valid values are greater than or equal to 30.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigRegPollMethod 1.3.6.1.4.1.791.2.10.2.43.1.17.2
&If set to 'disabled', the agent no more retrieves the registry entry information (not by polling, nor by get request) and sets all statuses to ok. If set to 'poll-interval-only', the agent only retrieves the information by polling, but not by get request. If set to 'poll-interval-and-query', the agent retrieves the information in both cases (polling and get request). If set to 'query-only', the agent retrieves the information for get requests only.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER disabled(1), poll-interval-only(2), poll-interval-and-query(3), query-only(4)  

w2kConfigRegName 1.3.6.1.4.1.791.2.10.2.43.1.17.3
&Name of the watcher to be added/removed, monitoring a registry entry with this name. The name is the complete registry path ending with the registry leaf name. If the leaf name contains a backslash, the leaf name must be quoted with double quotes. Important: This name is case insensitive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigRegDescription 1.3.6.1.4.1.791.2.10.2.43.1.17.4
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigRegAggLag 1.3.6.1.4.1.791.2.10.2.43.1.17.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kConfigRegExist 1.3.6.1.4.1.791.2.10.2.43.1.17.6
&Flag indicating whether to raise an alert if a registry entry is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kConfigRegExistMonitor 1.3.6.1.4.1.791.2.10.2.43.1.17.7
&Flag indicating whether the existence of the registry entry should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigRegValueRef 1.3.6.1.4.1.791.2.10.2.43.1.17.8
&This attribute is used as the reference value the registry entry is compared with. If the condition is one of 'should-be-equal', 'should-not-be-equal', 'should-be-below' or 'should-be-above', this reference value must be set by the user. In case of 'should-not-change', by setting the status button attribute to 'reset-value', the reference value is set to the current value of the registry entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kConfigRegValueCond 1.3.6.1.4.1.791.2.10.2.43.1.17.9
&Flag indicating whether to raise an alert if a registry entry does not fullfill the given condition compared with the reference value attribute. 'should-be-below' and 'should-be-above' is only allowed for entries with type DWORD. For entries with type Binary 'should-not-change' is the only possible value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-equal(1), should-not-be-equal(2), should-be-below(3), should-be-above(4), should-not-change(5)  

w2kConfigRegValueMonitor 1.3.6.1.4.1.791.2.10.2.43.1.17.10
&Flag indicating whether the value of the registry entry should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kConfigRegButton 1.3.6.1.4.1.791.2.10.2.43.1.17.11
&This attribute is used to add or remove a watcher with the current value of the watcher name attribute in this group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), add(2), remove(3)  

w2kStatusGeneralTotalCount 1.3.6.1.4.1.791.2.10.2.43.2.1.1
&The number of all monitored resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralTotalWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.2
&The number of all monitored resources in a warning status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralTotalCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.3
&The number of all monitored resources in a critical status.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuCount 1.3.6.1.4.1.791.2.10.2.43.2.1.4
&The number of monitored processors (including the processors total value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.5
&The number of monitored processors in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.6
&The number of monitored processors in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemCount 1.3.6.1.4.1.791.2.10.2.43.2.1.7
&The number of monitored memory resources.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.8
&The number of monitored memory resources in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMemCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.9
&The number of monitored memory resources in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolCount 1.3.6.1.4.1.791.2.10.2.43.2.1.10
&The number of monitored logical volumes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.11
&The number of monitored logical volumes in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralLVolCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.12
&The number of monitored logical volumes in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntCount 1.3.6.1.4.1.791.2.10.2.43.2.1.13
&The number of monitored mounts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.14
&The number of monitored mounts in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralMntCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.15
&The number of monitored mounts in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsCount 1.3.6.1.4.1.791.2.10.2.43.2.1.16
&The number of monitored distributed file system links.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.17
&The number of monitored distributed file system links in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDfsCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.18
&The number of monitored distributed file system links in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotCount 1.3.6.1.4.1.791.2.10.2.43.2.1.19
&The number of monitored quotas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.20
&The number of monitored quotas in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralQuotCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.21
&The number of monitored quotas in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirCount 1.3.6.1.4.1.791.2.10.2.43.2.1.22
&The number of monitored directories.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.23
&The number of monitored directories in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralDirCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.24
&The number of monitored directories in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileCount 1.3.6.1.4.1.791.2.10.2.43.2.1.25
&The number of monitored files.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.26
&The number of monitored files in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralFileCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.27
&The number of monitored files in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcCount 1.3.6.1.4.1.791.2.10.2.43.2.1.28
&The number of monitored processes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.29
&The number of monitored processes in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralProcCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.30
&The number of monitored processes in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcCount 1.3.6.1.4.1.791.2.10.2.43.2.1.31
&The number of monitored services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.32
&The number of monitored services in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSrvcCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.33
&The number of monitored services in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobCount 1.3.6.1.4.1.791.2.10.2.43.2.1.34
&The number of monitored jobs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.35
&The number of monitored jobs in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralJobCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.36
&The number of monitored jobs in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessCount 1.3.6.1.4.1.791.2.10.2.43.2.1.37
&The number of monitored sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.38
&The number of monitored sessions in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralSessCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.39
&The number of monitored sessions in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnCount 1.3.6.1.4.1.791.2.10.2.43.2.1.40
&The number of monitored printers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.41
&The number of monitored printers in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralPrnCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.42
&The number of monitored printers in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetCount 1.3.6.1.4.1.791.2.10.2.43.2.1.43
&The number of monitored network interfaces (including the network interfaces total value).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.44
&The number of monitored network interfaces in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralNetCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.45
&The number of monitored network interfaces in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegCount 1.3.6.1.4.1.791.2.10.2.43.2.1.46
&The number of monitored registry entries.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegWarn 1.3.6.1.4.1.791.2.10.2.43.2.1.47
&The number of monitored registry entries in a warning state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusGeneralRegCrit 1.3.6.1.4.1.791.2.10.2.43.2.1.48
&The number of monitored registry entries in a critical state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadValue 1.3.6.1.4.1.791.2.10.2.43.2.2.1
&The current total utilization of all processors (as percentage value of 100).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadLagValue 1.3.6.1.4.1.791.2.10.2.43.2.2.2
&The number of consecutive poll intervals that the threshold had been (b)reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadLag 1.3.6.1.4.1.791.2.10.2.43.2.2.3
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadWarn 1.3.6.1.4.1.791.2.10.2.43.2.2.4
&Warning threshold for the total utilization of all processors (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadCrit 1.3.6.1.4.1.791.2.10.2.43.2.2.5
&Critical threshold for the total utilization of all processors (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTotalLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.2.6
&Flag indicating whether the total utilization of all processors should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusCpuTotalLoadStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.7
&The current status of the total utilization of all processors as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuTotalCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.2.8
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuCount 1.3.6.1.4.1.791.2.10.2.43.2.2.9
&The number of entries in the w2kStatusCpuTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuTable 1.3.6.1.4.1.791.2.10.2.43.2.2.10
&A table containing information about all monitored processors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusCpuRow

w2kStatusCpuEntry 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusCpuRow  

w2kStatusCpuName 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.1
&Name of the watcher, monitoring a processor with the processor identification number contained in this dummy name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuType 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.2
&The type of the processor.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusCpuAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.3
&The current status of the processor as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuLoadValue 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.4
&The current processor utilization (as percentage value of 100).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadLagValue 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.5
&The number of consecutive poll intervals that the threshold had been (b)reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadLag 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.6
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadWarn 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.7
&Warning threshold for the utilization of the processor (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadCrit 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.8
&Critical threshold for the utilization of the processor (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusCpuLoadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.9
&Flag indicating whether the utilization of the processor should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusCpuLoadStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.10
&The current status of the processor utilization as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusCpuLossAction 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.11
&Flag defining the severity if the loss of the processor is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusCpuLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.12
&The current status of the processor's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusCpuCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.2.10.1.13
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMemVirtTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.1
&The total size of the virtual memory on the system that can be committed (in kilobytes). The virtual memory comprises the physical and the paging memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtValue 1.3.6.1.4.1.791.2.10.2.43.2.3.2
&The size of the currently committed virtual memory (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.3
&The number of consecutive poll intervals that the threshold had been (b)reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtLag 1.3.6.1.4.1.791.2.10.2.43.2.3.4
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.5
&The actual warning threshold in committed kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.6
&The actual critical threshold in committed kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemVirtWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.7
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the committed virtual memory. The committed value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemVirtCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.8
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the committed virtual memory. The committed value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemVirtMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.9
&Flag indicating whether the virtual memory should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemVirtStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.10
&The current status of the virtual memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemPhysTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.11
&The total size of the physical memory on the system (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysValue 1.3.6.1.4.1.791.2.10.2.43.2.3.12
&The size of the currently used physical memory (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.13
&The number of consecutive poll intervals that the threshold had been (b)reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysLag 1.3.6.1.4.1.791.2.10.2.43.2.3.14
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.15
&The actual warning threshold in used kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.16
&The actual critical threshold in used kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPhysWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.17
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the used physical memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPhysCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.18
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the used physical memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPhysMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.19
&Flag indicating whether the physical memory should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemPhysStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.20
&The current status of the physical memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemPageTotal 1.3.6.1.4.1.791.2.10.2.43.2.3.21
&The total size of the paging memory on the system (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageValue 1.3.6.1.4.1.791.2.10.2.43.2.3.22
&The size of the currently used paging memory (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageLagValue 1.3.6.1.4.1.791.2.10.2.43.2.3.23
&The number of consecutive poll intervals that the threshold had been (b)reached.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageLag 1.3.6.1.4.1.791.2.10.2.43.2.3.24
&The number of consecutive poll intervals that the threshold has to be (b)reached before the status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.3.25
&The actual warning threshold in used kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageCritValue 1.3.6.1.4.1.791.2.10.2.43.2.3.26
&The actual critical threshold in used kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMemPageWarn 1.3.6.1.4.1.791.2.10.2.43.2.3.27
&Warning threshold in kilobytes, either for the free (by appending a 'F') or for the used paging memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPageCrit 1.3.6.1.4.1.791.2.10.2.43.2.3.28
&Critical threshold in kilobytes, either for the free (by appending a 'F') or for the used paging memory. The used value can also be defined as a percentage value of the total size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMemPageMonitor 1.3.6.1.4.1.791.2.10.2.43.2.3.29
&Flag indicating whether the paging memory should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusMemPageStatus 1.3.6.1.4.1.791.2.10.2.43.2.3.30
&The current status of the paging memory as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMemCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.3.31
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolCount 1.3.6.1.4.1.791.2.10.2.43.2.4.1
&The number of entries in the w2kStatusLVolTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTable 1.3.6.1.4.1.791.2.10.2.43.2.4.2
&A table containing information about all monitored logical volumes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusLVolRow

w2kStatusLVolEntry 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusLVolRow  

w2kStatusLVolName 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.1
&Name of the watcher, monitoring a logical volume with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolDescription 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolMounts 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.3
&A list of the mount points, where this logical volume is mounted on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolInfo 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.4
&Information about the format (e.g. NTFS), the alternate name (e.g. used in PerfMon) and the label of the logical volume. The alternate name may be empty. The single values are delimited by a pipe sign.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.5
&Name of the auto discovery watcher, which created this watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.6
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolAggLag 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.8
&The current status of the logical volume as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolSizeTotal 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.9
&The total size of the logical volume (in megabytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.10
&The current value of the used logical volume size (in megabytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.11
&The actual warning threshold in used megabytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.12
&The actual critical threshold in used megabytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.13
&Warning threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller (in case of 'free' greater) than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.14
&Critical threshold in megabytes, either for the free (by appending a 'F') or for the used logical volume size. The used size can also be defined as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater (in case of 'free' smaller) than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.15
&Flag indicating whether the used logical volume size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.16
&The current status of the used logical volume size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.17
&The current value of the delta in used logical volume size monitored in the last polling interval (in megabytes). In case of shrinkage this is a negative number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.18
&The actual warning threshold in megabytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.19
&The actual critical threshold in megabytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.20
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.21
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in used logical volume size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in megabytes or as a percentage value of the total logical volume size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.22
&Flag indicating whether the delta in used logical volume size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.23
&The current status of delta in used logical volume size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolTPutValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.24
&The current value of the throughput rate (kilobytes per second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.25
&Warning threshold for the throughput rate (kilobytes per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.26
&Critical threshold for the throughput rate (kilobytes per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolTPutMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.27
&Flag indicating whether the throughput rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolTPutStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.28
&The current status of the throughput rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolFragValue 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.29
&The current value of the file fragmentation (as percentage value of 100).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragWarn 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.30
&Warning threshold for the file fragmentation (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragCrit 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.31
&Critical threshold for the file fragmentation (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusLVolFragMonitor 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.32
&Flag indicating whether the file fragmentation should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusLVolFragStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.33
&The current status of the file fragmentation as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusLVolLossAction 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.34
&Flag defining the severity if the loss of the logical volume is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusLVolLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.35
&The current status of the logical volume's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusLVolCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.36
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusLVolButton 1.3.6.1.4.1.791.2.10.2.43.2.4.2.1.37
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusMntCount 1.3.6.1.4.1.791.2.10.2.43.2.5.1
&The number of entries in the w2kStatusMntTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMntTable 1.3.6.1.4.1.791.2.10.2.43.2.5.2
&A table containing information about all monitored mounts.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusMntRow

w2kStatusMntEntry 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusMntRow  

w2kStatusMntName 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.1
&Name of the watcher, monitoring a mount with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMntDescription 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusMntAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.3
&Name of the auto discovery watcher, which created this watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMntAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusMntAggLag 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusMntAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.6
&The current status of the mount as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusMntRelToValue 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.7
&The name of the current logical volume, which this mount is mounting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMntRelToRef 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.8
&The reference name, which is the name of the logical volume, mounted by this mount when this watcher was created or when the last 'reset-relTo' has been made.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMntRelToMonitor 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.9
&Flag indicating whether a change of the logical volume, mounted by this mount, should be monitored and if so, the level of alert to raise. Note: A change will not occur if the related logical volume is lossed. In that case the mount itself becomes lossed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusMntRelToStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.10
&The current status of the mount's relation. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntLossAction 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.11
&Flag defining the severity if the loss of the mount is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.12
&The current status of the mount's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusMntCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.13
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusMntButton 1.3.6.1.4.1.791.2.10.2.43.2.5.2.1.14
&This attribute is used to remove this watcher or to reset the 'related to' reference to the current value of the mount.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-relTo(3)  

w2kStatusDfsCount 1.3.6.1.4.1.791.2.10.2.43.2.6.1
&The number of entries in the w2kStatusDfsTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsTable 1.3.6.1.4.1.791.2.10.2.43.2.6.2
&A table containing information about all monitored distributed file system links.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusDfsRow

w2kStatusDfsEntry 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusDfsRow  

w2kStatusDfsName 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.1
&Name of the watcher, monitoring a distributed file system link with this name. The name consists of the Dfs root name followed by the Dfs link name. These two names are concatenated by a back-slash. The single Dfs root name (without '\DfsLinkName') can also be used as watcher name, to be able to monitor all Dfs links of a Dfs root. In that case no loss action will be triggered if no Dfs link exists. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsDescription 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsIds 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.3
&A pipe sign separated list of those replicas of the distributed file system link, that are unavailable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.4
&Name of the auto discovery watcher, which created this watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsAggLag 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.7
&The current status of the distributed file system link as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDfsReplicaTotal 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.8
&The total number of replicas of the distributed file system link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaValue 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.9
&The current value of the unavailable replicas number. Replicas set to 'offline' are also counted as being unavailable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaWarn 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.10
&Warning threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaCrit 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.11
&Critical threshold for the number of unavailable replicas of the distributed file system link. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDfsReplicaMonitor 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.12
&Flag indicating whether the unavailable replicas should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDfsReplicaStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.13
&The current status of the unavailable replicas number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDfsLossAction 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.14
&Flag defining the severity if the loss of the distributed file system link is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDfsLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.15
&The current status of the distributed file system link's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDfsCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.16
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDfsButton 1.3.6.1.4.1.791.2.10.2.43.2.6.2.1.17
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusQuotCount 1.3.6.1.4.1.791.2.10.2.43.2.7.1
&The number of entries in the w2kStatusQuotTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotTable 1.3.6.1.4.1.791.2.10.2.43.2.7.2
&A table containing information about all monitored quotas.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusQuotRow

w2kStatusQuotEntry 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusQuotRow  

w2kStatusQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.1
&Logical volume name of the watcher, monitoring a quota with this logical volume name. The name specifies the logical volume on which this quota exists. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotUserName 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.2
&User name of the watcher, monitoring a quota with this user name. The name specifies the user for whom this quota exists and is in the form 'domainName\userName' or 'userName@domainName'. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotDescription 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.3
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotAggLag 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.6
&The current status of the quota as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusQuotExist 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.7
&Flag indicating whether to raise an alert if a quota is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusQuotExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.8
&Flag indicating whether the existence of the quota should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusQuotExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.9
&The current status of the quota existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusQuotSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.10
&The current value of the used quota size (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.11
&Warning threshold for the used quota size (in kilobytes). Initial this equals the warning level of the Windows 2000 quota management. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.12
&Critical threshold for the used quota size (in kilobytes). Initial this equals the quota limit of the Windows 2000 quota management. Valid values are greater than 1 and graeter warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusQuotSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.13
&Flag indicating whether the used quota size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusQuotSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.14
&The current status of the used quota size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusQuotCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusQuotButton 1.3.6.1.4.1.791.2.10.2.43.2.7.2.1.16
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusDirCount 1.3.6.1.4.1.791.2.10.2.43.2.8.1
&The number of entries in the w2kStatusDirTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirTable 1.3.6.1.4.1.791.2.10.2.43.2.8.2
&A table containing information about all monitored directories.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusDirRow

w2kStatusDirEntry 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusDirRow  

w2kStatusDirName 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.1
&Name of the watcher, monitoring a directory with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirDescription 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDirAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirAggLag 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDirAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.5
&The current status of the directory as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirExist 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.6
&Flag indicating whether to raise an alert if a directory is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusDirExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.7
&Flag indicating whether the existence of the directory should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusDirExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.8
&The current status of the directory existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDirTimeValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.9
&The current value of the latest timestamp. If the directory does not exist, the timestamp value is set to '1970-01-01 01:00:00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirTimeRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.10
&The reference timestamp, which is the timestamp of the directory when this watcher was created or when the last 'reset-time' has been made. If the directory does not exist, the reference timestamp is set to '1970-01-01 01:00:00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.11
&Flag indicating whether the latest timestamp (of all files and all subfolders, including the given folder) should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusDirTimeStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.12
&The current status of the latest timestamp. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusDirSizeRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.13
&The total size of the directory at the time when this watcher was created (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.14
&The current value of the total directory size (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.15
&The actual warning threshold in kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.16
&The actual critical threshold in kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.17
&Warning threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.18
&Critical threshold for the total directory size (all files in the given folder and in all subfolders), either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.19
&Flag indicating whether the total directory size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.20
&The current status of the total directory size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.21
&The current value of the delta in total directory size monitored in the last polling interval (in kilobytes). In case of shrinkage this is a negative number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.22
&The actual warning threshold in kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.23
&The actual critical threshold in kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.24
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.25
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in total directory size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the total directory size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusDirSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.26
&Flag indicating whether the delta in total directory size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.27
&The current status of the delta in total directory size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirEntryValue 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.28
&The current value of the number of files.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryWarn 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.29
&Warning threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryCrit 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.30
&Critical threshold for the number of entries (sum of files and folders in the given folder and in all subfolders). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusDirEntryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.31
&Flag indicating whether the number of entries should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusDirEntryStatus 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.32
&The current status of the number of entries as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusDirCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.33
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusDirButton 1.3.6.1.4.1.791.2.10.2.43.2.8.2.1.34
&This attribute is used to remove this watcher or to reset the time reference to the current value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-time(3)  

w2kStatusFileCount 1.3.6.1.4.1.791.2.10.2.43.2.9.1
&The number of entries in the w2kStatusFileTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileTable 1.3.6.1.4.1.791.2.10.2.43.2.9.2
&A table containing information about all monitored files.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusFileRow

w2kStatusFileEntry 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusFileRow  

w2kStatusFileName 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.1
&Name of the watcher, monitoring a file with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileDescription 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusFileAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileAggLag 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusFileAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.5
&The current status of the file as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileExist 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.6
&Flag indicating whether to raise an alert if a file is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusFileExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.7
&Flag indicating whether the existence of the file should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusFileExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.8
&The current status of the file existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusFileTimeValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.9
&The current value of the latest timestamp. If the file does not exist, the timestamp value is set to '1970-01-01 01:00:00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileTimeRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.10
&The reference timestamp, which is the timestamp of the file when this watcher was created or when the last 'reset-time' has been made. If the file does not exist, the reference timestamp is set to '1970-01-01 01:00:00'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileTimeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.11
&Flag indicating whether the timestamp of the file should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusFileTimeStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.12
&The current status of the latest timestamp. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusFileSizeRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.13
&The size of the file at the time when this watcher was created (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.14
&The current value of the file size (in kilobytes).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.15
&The actual warning threshold in kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeCritValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.16
&The actual critical threshold in kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeWarn 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.17
&Warning threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeCrit 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.18
&Critical threshold for the file size, either in kilobytes or as a percentage value of the original size (by appending a '%'). The original size is the size when this watcher was created. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.19
&Flag indicating whether the file size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusFileSizeStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.20
&The current status of the file size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileSizeDValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.21
&The current value of the delta in file size monitored in the last polling interval (in kilobytes). In case of shrinkage this is a negative number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusFileSizeDWarnValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.22
&The actual warning threshold in kilobytes derived from the configured warning threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDCritValue 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.23
&The actual critical threshold in kilobytes derived from the configured critical threshold.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDWarn 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.24
&Warning threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDCrit 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.25
&Critical threshold, either for the growth (by appending a '+') or for the shrinkage (by appending a '-') or for the absolute delta in file size monitored in one poll interval. Growth, shrinkage and absolute delta can be given in kilobytes or as a percentage value of the file size (by appending a '%'). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusFileSizeDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.26
&Flag indicating whether the delta in file size should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusFileSizeDStatus 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.27
&The current status of the delta in file size as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusFileCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.28
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusFileButton 1.3.6.1.4.1.791.2.10.2.43.2.9.2.1.29
&This attribute is used to remove this watcher or to reset the time reference to the current value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-time(3)  

w2kStatusProcCount 1.3.6.1.4.1.791.2.10.2.43.2.10.1
&The number of entries in the w2kStatusProcTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcTable 1.3.6.1.4.1.791.2.10.2.43.2.10.2
&A table containing information about all monitored processes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusProcRow

w2kStatusProcEntry 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusProcRow  

w2kStatusProcProcName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.1
&Process name of the watcher, monitoring a process with this process name. An asterisk '*' can be used as process name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusProcPathName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.2
&Path name of the watcher, monitoring a process with this path name. An asterisk '*' can be used as path name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusProcUserName 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.3
&User name of the watcher, monitoring a process started by this user. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of processes this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusProcDescription 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.4
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusProcIds 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.5
&A pipe sign separated list of the ids of those processes, that (b)reach any threshold (except instance metric).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusProcAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.6
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcAggLag 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.7
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.8
&The current status of the process as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcInstValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.9
&The current value of the process instances number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.10
&Minimum threshold for the number of process instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.11
&Maximum threshold for the number of process instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcInstMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.12
&Flag indicating whether the number of process instances should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcInstStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.13
&The current status of the process instances number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcChildMinValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.14
&The current minimum value of the number of childprocesses of the process. If there is more than one process instance, this value is the minimum of all instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMaxValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.15
&The current maximum value of the number of childprocesses of the process. If there is more than one process instance, this value is the maximum of all instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.16
&Minimum threshold for the number of childprocesses of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.17
&Maximum threshold for the number of childprocesses of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcChildMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.18
&Flag indicating whether the number of childprocesses of the process should be monitored and if so, the level of alert to raise. Note: This metric decreases agent performance much more than any other metric. For this reason the default is 'do-not-monitor'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcChildStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.19
&The current status of the childprocesses number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcThreadMinValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.20
&The current minimum value of the number of threads of the process. If there is more than one process instance, this value is the minimum of all instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMaxValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.21
&The current maximum value of the number of threads of the process. If there is more than one process instance, this value is the maximum of all instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMin 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.22
&Minimum threshold for the number of threads of the process. If there is more than one process instance, the minimum of all instances is compared with this value. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMax 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.23
&Maximum threshold for the number of threads of the process. If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcThreadMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.24
&Flag indicating whether the number of threads of the process should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusProcThreadStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.25
&The current status of the threads number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusProcMemoryValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.26
&The current value of the memory usage of the process (sum of 'Working Set Size' and 'Used Page File' in kilobytes), build as the maximum over all process instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.27
&Warning threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.28
&Critical threshold for the memory usage of the process (in kilobytes). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.29
&Flag indicating whether the memory usage of the process should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusProcMemoryStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.30
&The current status of the process memory usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.31
&The current value of the CPU usage of the process (as percentage value of 100), build as the maximum over all process instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.32
&Warning threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.33
&Critical threshold for the CPU usage of the process (as percentage value of 100). If there is more than one process instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusProcCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.34
&Flag indicating whether the CPU usage of the process should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusProcCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.35
&The current status of the process CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusProcCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.36
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusProcButton 1.3.6.1.4.1.791.2.10.2.43.2.10.2.1.37
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusSrvcCount 1.3.6.1.4.1.791.2.10.2.43.2.11.1
&The number of entries in the w2kStatusSrvcTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcTable 1.3.6.1.4.1.791.2.10.2.43.2.11.2
&A table containing information about all monitored services.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusSrvcRow

w2kStatusSrvcEntry 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusSrvcRow  

w2kStatusSrvcName 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.1
&Name of the watcher, monitoring a service with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcDescription 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcDescr 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.3
&The description of the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.4
&Name of the auto discovery watcher, which created this watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcAggLag 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSrvcAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.7
&The current status of the service as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSrvcExist 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.8
&Flag indicating whether to raise an alert if a service is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusSrvcExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.9
&Flag indicating whether the existence of the service should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSrvcExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.10
&The current status of the service existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSrvcActiveValue 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.11
&The current value of the service activity.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), active-running(2), active-pausePending(3), active-stopPending(4), notActive-stopped(5), notActive-paused(6), notActive-continuePending(7), notActive-startPending(8)  

w2kStatusSrvcActive 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.12
&Flag indicating whether to raise an alert if an existent service is active or if it is inactive.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-active(1), should-not-be-active(2)  

w2kStatusSrvcActiveMonitor 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.13
&Flag indicating whether the activity of the service should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSrvcActiveStatus 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.14
&The current status of the service activity as determined by the condition. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSrvcCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSrvcButton 1.3.6.1.4.1.791.2.10.2.43.2.11.2.1.16
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusJobCount 1.3.6.1.4.1.791.2.10.2.43.2.12.1
&The number of entries in the w2kStatusJobTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusJobTable 1.3.6.1.4.1.791.2.10.2.43.2.12.2
&A table containing information about all monitored jobs.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusJobRow

w2kStatusJobEntry 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusJobRow  

w2kStatusJobName 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.1
&Name of the watcher, monitoring a job with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusJobDescription 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusJobAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusJobAggLag 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusJobAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.5
&The current status of the job as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusJobExist 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.6
&Flag indicating whether to raise an alert if a job is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusJobExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.7
&Flag indicating whether the existence of the job should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusJobExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.8
&The current status of the job existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusJobProcessValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.9
&The current value of the active processes number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMin 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.10
&Minimum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMax 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.11
&Maximum threshold for the number of active processes associated with the job. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusJobProcessMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.12
&Flag indicating whether the number of active processes associated with the job should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusJobProcessStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.13
&The current status of the active processes number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusJobCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.14
&The current value of the job's CPU usage (as percentage value of 100).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.15
&Warning threshold for the CPU usage of the job (as percentage value of 100). Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.16
&Critical threshold for the CPU usage of the job (as percentage value of 100). Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusJobCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.17
&Flag indicating whether the CPU usage of the job should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusJobCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.18
&The current status of the job's CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusJobCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.19
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusJobButton 1.3.6.1.4.1.791.2.10.2.43.2.12.2.1.20
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusSessCount 1.3.6.1.4.1.791.2.10.2.43.2.13.1
&The number of entries in the w2kStatusSessTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSessTable 1.3.6.1.4.1.791.2.10.2.43.2.13.2
&A table containing information about all monitored sessions.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusSessRow

w2kStatusSessEntry 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusSessRow  

w2kStatusSessClientName 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.1
&Client name of the watcher, monitoring a session with this client name. The client name is the name of the host, from where this session was initiated. An asterisk '*' can be used as client name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSessUserName 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.2
&User name of the watcher, monitoring a session with this user name. The user name specifies the user, who logged in and is in the form 'domainName\userName'. An asterisk '*' can be used as user name or can be prepended/appended to it, in order to widen the scope of sessions this watcher monitors. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSessDescription 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.3
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusSessIds 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.4
&A pipe sign separated list of the ids of those sessions, that (b)reach any threshold (except instance metric).
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSessAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.5
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSessAggLag 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.6
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.7
&The current status of the session as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessInstValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.8
&The current value of the session instances number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMin 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.9
&Minimum threshold for the number of session instances. Valid values are greater than or equal to -1 and smaller than or equal to the maximum threshold. Setting to -1 disables the monitoring of the minimum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMax 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.10
&Maximum threshold for the number of session instances. Valid values are greater than or equal to -1 and greater than or equal to the minimum threshold. Setting to -1 disables the monitoring of the maximum.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessInstMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.11
&Flag indicating whether the number of session instances should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusSessInstStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.12
&The current status of the session instances number as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusSessMemoryValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.13
&The current value of the session's memory usage (sum of 'Working Set Size' and 'Used Page File' in kilobytes), build as the maximum over all session instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryWarn 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.14
&Warning threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryCrit 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.15
&Critical threshold for the memory usage of the session (in kilobytes). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessMemoryMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.16
&Flag indicating whether the memory usage of the session should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusSessMemoryStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.17
&The current status of the session's memory usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessCpuValue 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.18
&The current value of the session's CPU usage (as percentage value of 100), build as the maximum over all session instances.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuWarn 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.19
&Warning threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 1 to 99 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuCrit 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.20
&Critical threshold for the CPU usage of the session (as percentage value of 100). If there is more than one session instance, the maximum of all instances is compared with this value. Valid values are 2 to 100 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusSessCpuMonitor 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.21
&Flag indicating whether the CPU usage of the session should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusSessCpuStatus 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.22
&The current status of the session's CPU usage as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusSessCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.23
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusSessButton 1.3.6.1.4.1.791.2.10.2.43.2.13.2.1.24
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusPrnCount 1.3.6.1.4.1.791.2.10.2.43.2.14.1
&The number of entries in the w2kStatusPrnTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnTable 1.3.6.1.4.1.791.2.10.2.43.2.14.2
&A table containing information about all monitored printers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusPrnRow

w2kStatusPrnEntry 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusPrnRow  

w2kStatusPrnName 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.1
&Name of the watcher, monitoring a local printer with this name. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnDescription 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnAutoWatcherName 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.3
&Name of the auto discovery watcher, which created this watcher.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.4
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnAggLag 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.5
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.6
&The current status of the printer as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusPrnEventDescr 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.7
&The description of the last printer event. Note: Printer events can only be determined if there is a printing job in the printers queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown-no-print-jobs(1), printing(2), paper-error(3), toner-error(4), manual(5), offline(6), paused(7), software-error(8), general-error(9)  

w2kStatusPrnEventMonitor 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.8
&Flag indicating whether the occurence of printer events should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusPrnEventStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.9
&The current status of the printer event monitoring. Note: Printer events can only be determined if there is a printing job in the printers queue. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnQueueValue 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.10
&The current value of jobs in the printer's queue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueWarn 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.11
&Warning threshold for the number of jobs in the printer's queue. Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueCrit 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.12
&Critical threshold for the number of jobs in the printer's queue. Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusPrnQueueMonitor 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.13
&Flag indicating whether the printer's job queue should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusPrnQueueStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.14
&The current status of the printer queue as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusPrnLossAction 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.15
&Flag defining the severity if the loss of the printer is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.16
&The current status of the printer's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusPrnCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.17
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusPrnButton 1.3.6.1.4.1.791.2.10.2.43.2.14.2.1.18
&This attribute is used to remove this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2)  

w2kStatusNetTotalAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.15.1
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalAggLag 1.3.6.1.4.1.791.2.10.2.43.2.15.2
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.3
&The current status of the network interfaces total as a 'worst case' aggregate of all total statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalInPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.4
&The current total value of the received packets rate (packets per second). The total value is the sum of all network interfaces (except the loopback interface).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.5
&Warning threshold for the total rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.6
&Critical threshold for the total rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.7
&Flag indicating whether the total rate of received packets should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalInPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.8
&The current status of the total received packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalOutPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.9
&The current total value of the sent packets rate (packets per second). The total value is the sum of all network interfaces (except the loopback interface).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.10
&Warning threshold for the total rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.11
&Critical threshold for the total rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.12
&Flag indicating whether the total rate of sent packets should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalOutPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.13
&The current status of the total sent packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalInErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.14
&The current total value of the received errors rate (errors per poll interval). The total value is the sum of all network interfaces (except the loopback interface).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.15
&Warning threshold for the total rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.16
&Critical threshold for the total rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.17
&Flag indicating whether the total rate of received errors should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalInErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.18
&The current status of the total received errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalOutErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.19
&The current total value of the sent errors rate (errors per poll interval). The total value is the sum of all network interfaces (except the loopback interface).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.20
&Warning threshold for the total rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.21
&Critical threshold for the total rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTotalOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.22
&Flag indicating whether the total rate of sent errors should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetTotalOutErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.23
&The current status of the total sent errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetTotalCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.15.24
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusNetCount 1.3.6.1.4.1.791.2.10.2.43.2.15.25
&The number of entries in the w2kStatusNetTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetTable 1.3.6.1.4.1.791.2.10.2.43.2.15.26
&A table containing information about all monitored network interfaces.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusNetRow

w2kStatusNetEntry 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusNetRow  

w2kStatusNetName 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.1
&Name of the watcher, monitoring a network interface with this name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusNetAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.2
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetAggLag 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.3
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.4
&The current status of the network interface as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetInPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.5
&The current value of the received packets rate (packets per second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.6
&Warning threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.7
&Critical threshold for the rate of received packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.8
&Flag indicating whether the received packets rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetInPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.9
&The current status of the received packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetOutPktValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.10
&The current value of the sent packets rate (packets per second).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.11
&Warning threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.12
&Critical threshold for the rate of sent packets over TCP/IP connections (packets per second). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutPktMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.13
&Flag indicating whether the sent packets rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetOutPktStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.14
&The current status of the sent packets rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetInErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.15
&The current value of the received errors rate (errors per poll interval).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.16
&Warning threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.17
&Critical threshold for the rate of received errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetInErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.18
&Flag indicating whether the received errors rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetInErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.19
&The current status of the received errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetOutErrDValue 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.20
&The current value of the sent errors rate (errors per poll interval).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDWarn 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.21
&Warning threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 0 and smaller than the critical threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDCrit 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.22
&Critical threshold for the rate of sent errors over TCP/IP connections (errors per poll interval). Valid values are greater than 1 and greater than the warning threshold.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusNetOutErrDMonitor 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.23
&Flag indicating whether the sent errors rate should be monitored and if so, which threshold should be compared with.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), warning-only(2), critical-only(3), both(4)  

w2kStatusNetOutErrDStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.24
&The current status of the sent errors rate as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusNetLossAction 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.25
&Flag defining the severity if the loss of the network interface is detected or whether to remove this watcher in that case.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER remove(1), up(2), down-warning(3), down-critical(4)  

w2kStatusNetLossStatus 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.26
&The current status of the network interface's loss as determined by the loss action.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusNetCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.15.26.1.27
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusRegCount 1.3.6.1.4.1.791.2.10.2.43.2.16.1
&The number of entries in the w2kStatusRegTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusRegTable 1.3.6.1.4.1.791.2.10.2.43.2.16.2
&A table containing information about all monitored registry entries.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kStatusRegRow

w2kStatusRegEntry 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kStatusRegRow  

w2kStatusRegName 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.1
&Name of the watcher, monitoring a registry entry with this name. The name is the complete registry path ending with the registry leaf name. If the leaf name contains a backslash, the leaf name must be quoted with double quotes. Important: This name is case insensitive.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusRegDescription 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.2
&Any description for this watcher.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusRegAggLagValue 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.3
&The number of consecutive poll intervals on which any status was not in the Ok or Up state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kStatusRegAggLag 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.4
&The number of consecutive poll intervals on which any status is not in the Ok or Up state, before the aggregate status changes. Valid values are greater than 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kStatusRegAggStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.5
&The current status of the registry entry as a 'worst case' aggregate of all its statuses.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), ok(2), warning(3), critical(4)  

w2kStatusRegExist 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.6
&Flag indicating whether to raise an alert if a registry entry is existent or if it is not-existent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-exist(1), should-not-exist(2)  

w2kStatusRegExistMonitor 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.7
&Flag indicating whether the existence of the registry entry should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusRegExistStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.8
&The current status of the registry entry existence.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusRegValueValue 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.9
&The current value of the registry entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusRegValueType 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.10
&The current type of the registry entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER string(1), binary(2), dword(3), unknown(4)  

w2kStatusRegValueRef 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.11
&This attribute is used as the reference value the registry entry is compared with. If the condition is one of 'should-be-equal', 'should-not-be-equal', 'should-be-below' or 'should-be-above', this reference value must be set by the user. In case of 'should-not-change', by setting the status button attribute to 'reset-value', the reference value is set to the current value of the registry entry.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

w2kStatusRegValueCond 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.12
&Flag indicating whether to raise an alert if a registry entry does not fullfill the given condition compared with the reference value attribute. 'should-be-below' and 'should-be-above' is only allowed for entries with type DWORD. For entries with type Binary 'should-not-change' is the only possible value.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER should-be-equal(1), should-not-be-equal(2), should-be-below(3), should-be-above(4), should-not-change(5)  

w2kStatusRegValueMonitor 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.13
&Flag indicating whether the value of the registry entry should be monitored and if so, the level of alert to raise.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER do-not-monitor(1), down-warning(2), down-critical(3)  

w2kStatusRegValueStatus 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.14
&The current status of the registry entry as determined by the thresholds. The status 'unknown' means that the current value could not be retrieved from the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unknown(1), up(2), down-warning(3), down-critical(4)  

w2kStatusRegCallBackRef 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.15
&The name of the Call-Back reference that should be invoked in case of a status change.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kStatusRegButton 1.3.6.1.4.1.791.2.10.2.43.2.16.2.1.16
&This attribute is used to remove this watcher or to reset the value reference to the current value of the registry entry. The 'reset-value' is only possible in case the condition is 'should-not-change'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), remove(2), reset-value(3)  

w2kAvailLVolRefresh 1.3.6.1.4.1.791.2.10.2.43.3.1.1
&Set this value to 'refresh' to let the agent check again for all current logical volumes. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailLVolCount 1.3.6.1.4.1.791.2.10.2.43.3.1.2
&The number of currently available logical volumes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailLVolTable 1.3.6.1.4.1.791.2.10.2.43.3.1.3
&A table containing the logical volumes available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailLVolRow

w2kAvailLVolEntry 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailLVolRow  

w2kAvailLVolName 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.1
&The name of the logical volume.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolMounts 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.2
&A list of the mount points, where this logical volume is mounted on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolInfo 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.3
&Information about the format (e.g. NTFS), the alternate name (e.g. used in PerfMon) and the label of the logical volume. The alternate name may be empty. The single values are delimited by a pipe sign.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailLVolTime 1.3.6.1.4.1.791.2.10.2.43.3.1.3.1.4
&The time when the agent discovered this logical volume and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailMntRefresh 1.3.6.1.4.1.791.2.10.2.43.3.2.1
&Set this value to 'refresh' to let the agent check again for all current mounts. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailMntCount 1.3.6.1.4.1.791.2.10.2.43.3.2.2
&The number of currently available mounts.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailMntTable 1.3.6.1.4.1.791.2.10.2.43.3.2.3
&A table containing the mounts available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailMntRow

w2kAvailMntEntry 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailMntRow  

w2kAvailMntName 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.1
&The name of the mount.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailMntRelTo 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.2
&The name of the current logical volume, which this mount is mounting.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailMntTime 1.3.6.1.4.1.791.2.10.2.43.3.2.3.1.3
&The time when the agent discovered this mount and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailDfsRefresh 1.3.6.1.4.1.791.2.10.2.43.3.3.1
&Set this value to 'refresh' to let the agent check again for all current distributed file system links. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailDfsCount 1.3.6.1.4.1.791.2.10.2.43.3.3.2
&The number of currently available distributed file system links.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailDfsTable 1.3.6.1.4.1.791.2.10.2.43.3.3.3
&A table containing the distributed file system links available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailDfsRow

w2kAvailDfsEntry 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailDfsRow  

w2kAvailDfsName 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1.1
&The name of the distributed file system link. The name consists of the distributed file system root name followed by the Dfs link name. These two names are concatenated by a back-slash.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailDfsTime 1.3.6.1.4.1.791.2.10.2.43.3.3.3.1.2
&The time when the agent discovered this distributed file system link and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotRefresh 1.3.6.1.4.1.791.2.10.2.43.3.4.1
&Set this value to 'refresh' to let the agent check again for all current quotas. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailQuotCount 1.3.6.1.4.1.791.2.10.2.43.3.4.2
&The number of currently available quotas.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotTable 1.3.6.1.4.1.791.2.10.2.43.3.4.3
&A table containing the quotas available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailQuotRow

w2kAvailQuotEntry 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailQuotRow  

w2kAvailQuotLVolName 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.1
&The name of the logical volume on which this quota exists.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotUserName 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.2
&The user name for whom this quota exists. The name is in the form 'domainName\userName' or 'userName@domainName'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailQuotWarnLevel 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.3
&The quota warning level for this user, as defined in the Windows 2000 quota management. Management applications adding a watcher for this quota should use this value as default warning threshold instead of the value stored in the config group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotLimit 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.4
&The quota limit for this user, as defined in the Windows 2000 quota management. Management applications adding a watcher for this quota should use this value as default critical threshold instead of the value stored in the config group.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailQuotTime 1.3.6.1.4.1.791.2.10.2.43.3.4.3.1.5
&The time when the agent discovered this quota and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailProcRefresh 1.3.6.1.4.1.791.2.10.2.43.3.5.1
&Set this value to 'refresh' to let the agent check again for all current processes. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailProcCount 1.3.6.1.4.1.791.2.10.2.43.3.5.2
&The number of currently available processes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailProcTable 1.3.6.1.4.1.791.2.10.2.43.3.5.3
&A table containing the processes available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailProcRow

w2kAvailProcEntry 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailProcRow  

w2kAvailProcProcName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.1
&The process name of the process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailProcPathName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.2
&The path name of the process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailProcUserName 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.3
&The user name of the process.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailProcTime 1.3.6.1.4.1.791.2.10.2.43.3.5.3.1.4
&The time when the agent discovered this process and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcRefresh 1.3.6.1.4.1.791.2.10.2.43.3.6.1
&Set this value to 'refresh' to let the agent check again for all current services. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailSrvcCount 1.3.6.1.4.1.791.2.10.2.43.3.6.2
&The number of currently available services.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailSrvcTable 1.3.6.1.4.1.791.2.10.2.43.3.6.3
&A table containing the services available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailSrvcRow

w2kAvailSrvcEntry 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailSrvcRow  

w2kAvailSrvcName 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.1
&The name of the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcDescr 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.2
&The description of the service.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSrvcTime 1.3.6.1.4.1.791.2.10.2.43.3.6.3.1.3
&The time when the agent discovered this service and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailJobRefresh 1.3.6.1.4.1.791.2.10.2.43.3.7.1
&Set this value to 'refresh' to let the agent check again for all current jobs. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailJobCount 1.3.6.1.4.1.791.2.10.2.43.3.7.2
&The number of currently available jobs.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailJobTable 1.3.6.1.4.1.791.2.10.2.43.3.7.3
&A table containing the jobs available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailJobRow

w2kAvailJobEntry 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailJobRow  

w2kAvailJobName 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1.1
&The name of the job.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailJobTime 1.3.6.1.4.1.791.2.10.2.43.3.7.3.1.2
&The time when the agent discovered this job and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSessRefresh 1.3.6.1.4.1.791.2.10.2.43.3.8.1
&Set this value to 'refresh' to let the agent check again for all current sessions. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailSessCount 1.3.6.1.4.1.791.2.10.2.43.3.8.2
&The number of currently available sessions.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailSessTable 1.3.6.1.4.1.791.2.10.2.43.3.8.3
&A table containing the sessions available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailSessRow

w2kAvailSessEntry 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailSessRow  

w2kAvailSessClientName 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.1
&Client name of the session, which is the name of the host, from where this session was initiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSessUserName 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.2
&User name of the session, which specifies the user, who logged in and is in the form 'domainName\userName'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailSessTime 1.3.6.1.4.1.791.2.10.2.43.3.8.3.1.3
&The time when the agent discovered this session and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailPrnRefresh 1.3.6.1.4.1.791.2.10.2.43.3.9.1
&Set this value to 'refresh' to let the agent check again for all configured printers. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), refresh(2)  

w2kAvailPrnCount 1.3.6.1.4.1.791.2.10.2.43.3.9.2
&The number of currently available printers. This includes all local printers, but not the network printers.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kAvailPrnTable 1.3.6.1.4.1.791.2.10.2.43.3.9.3
&A table containing the local printers available for monitoring.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kAvailPrnRow

w2kAvailPrnEntry 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kAvailPrnRow  

w2kAvailPrnName 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1.1
&The name of the local printer.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kAvailPrnTime 1.3.6.1.4.1.791.2.10.2.43.3.9.3.1.2
&The time when the agent discovered this printer and put it into this table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kHistoryCpuCollect 1.3.6.1.4.1.791.2.10.2.43.4.1
&Set this value to 'yes' to let the agent collect traps of the processor group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryMemCollect 1.3.6.1.4.1.791.2.10.2.43.4.2
&Set this value to 'yes' to let the agent collect traps of the memory group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryLVolCollect 1.3.6.1.4.1.791.2.10.2.43.4.3
&Set this value to 'yes' to let the agent collect traps of the logical volume group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryMntCollect 1.3.6.1.4.1.791.2.10.2.43.4.4
&Set this value to 'yes' to let the agent collect traps of the mount group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryDfsCollect 1.3.6.1.4.1.791.2.10.2.43.4.5
&Set this value to 'yes' to let the agent collect traps of the distributed file system group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryQuotCollect 1.3.6.1.4.1.791.2.10.2.43.4.6
&Set this value to 'yes' to let the agent collect traps of the quota group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryDirCollect 1.3.6.1.4.1.791.2.10.2.43.4.7
&Set this value to 'yes' to let the agent collect traps of the directory group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryFileCollect 1.3.6.1.4.1.791.2.10.2.43.4.8
&Set this value to 'yes' to let the agent collect traps of the file group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryProcCollect 1.3.6.1.4.1.791.2.10.2.43.4.9
&Set this value to 'yes' to let the agent collect traps of the processes group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistorySrvcCollect 1.3.6.1.4.1.791.2.10.2.43.4.10
&Set this value to 'yes' to let the agent collect traps of the services group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryJobCollect 1.3.6.1.4.1.791.2.10.2.43.4.11
&Set this value to 'yes' to let the agent collect traps of the jobs group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistorySessCollect 1.3.6.1.4.1.791.2.10.2.43.4.12
&Set this value to 'yes' to let the agent collect traps of the sessions group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryPrnCollect 1.3.6.1.4.1.791.2.10.2.43.4.13
&Set this value to 'yes' to let the agent collect traps of the printers group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryNetCollect 1.3.6.1.4.1.791.2.10.2.43.4.14
&Set this value to 'yes' to let the agent collect traps of the network interfaces group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryRegCollect 1.3.6.1.4.1.791.2.10.2.43.4.15
&Set this value to 'yes' to let the agent collect traps of the registry entries group in the history table. If set to 'no' these traps are not stored in the history table.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

w2kHistoryButton 1.3.6.1.4.1.791.2.10.2.43.4.16
&Set this value to 'clear' to let the agent empty the history table. The user can not set the value to 'none'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), clear(2)  

w2kHistoryMaxEntries 1.3.6.1.4.1.791.2.10.2.43.4.17
&The maximum number of entries to be stored in the history table. Valid values are 0 to 100. If set to 0 no history information of traps is stored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

w2kHistoryCount 1.3.6.1.4.1.791.2.10.2.43.4.18
&The number of entries in the history table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kHistoryTable 1.3.6.1.4.1.791.2.10.2.43.4.19
&A table containing the last enterprise specific traps the agent arised.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    W2kHistoryRow

w2kHistoryEntry 1.3.6.1.4.1.791.2.10.2.43.4.19.1
&The table entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  W2kHistoryRow  

w2kHistoryTrapName 1.3.6.1.4.1.791.2.10.2.43.4.19.1.1
&The name of the trap as defined in the MIB.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kHistoryTrapNumber 1.3.6.1.4.1.791.2.10.2.43.4.19.1.2
&The enterprise specific trap type number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

w2kHistoryTrapTime 1.3.6.1.4.1.791.2.10.2.43.4.19.1.3
&The date and time the trap was sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kHistoryTrapVarBind 1.3.6.1.4.1.791.2.10.2.43.4.19.1.4
&A comma separated list of the varbinds the agent sent with the trap. Each element has the form 'attribute=value'.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

w2kCpuTotalUnknown 10000
&The watcher monitoring the processor total changed its status to 'unknown'.
TRAP-TYPE    

w2kCpuTotalOk 10001
&The watcher monitoring the processor total changed its status to 'ok'.
TRAP-TYPE    

w2kCpuTotalWarning 10002
&The watcher monitoring the processor total changed its status to 'warning'.
TRAP-TYPE    

w2kCpuTotalCritical 10003
&The watcher monitoring the processor total changed its status to 'critical'.
TRAP-TYPE    

w2kCpuTotalModified 10009
&The watcher configuration for the processor total changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kCpuUnknown 10990
&A watcher monitoring a processor changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuOk 10991
&A watcher monitoring a processor changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuWarning 10992
&A watcher monitoring a processor changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuCritical 10993
&A watcher monitoring a processor changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuAdded 10996
&A watcher monitoring a processor was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuDeleted 10997
&A watcher monitoring a processor was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kCpuInfo 10998
&A watcher monitoring a processor changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kCpuModified 10999
&The watcher configuration for a processor changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemVirtUnknown 11010
&The watcher monitoring the virtual memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemVirtOk 11011
&The watcher monitoring the virtual memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemVirtWarning 11012
&The watcher monitoring the virtual memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemVirtCritical 11013
&The watcher monitoring the virtual memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemVirtModified 11019
&The watcher configuration for the virtual memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemPhysUnknown 11020
&The watcher monitoring the physical memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemPhysOk 11021
&The watcher monitoring the physical memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemPhysWarning 11022
&The watcher monitoring the physical memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemPhysCritical 11023
&The watcher monitoring the physical memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemPhysModified 11029
&The watcher configuration for the physical memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMemPageUnknown 11030
&The watcher monitoring the paging memory changed its status to 'unknown'.
TRAP-TYPE    

w2kMemPageOk 11031
&The watcher monitoring the paging memory changed its status to 'ok'.
TRAP-TYPE    

w2kMemPageWarning 11032
&The watcher monitoring the paging memory changed its status to 'warning'.
TRAP-TYPE    

w2kMemPageCritical 11033
&The watcher monitoring the paging memory changed its status to 'critical'.
TRAP-TYPE    

w2kMemPageModified 11039
&The watcher configuration for the paging memory changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kLVolUnknown 12980
&A watcher monitoring a logical volume changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolOk 12981
&A watcher monitoring a logical volume changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolWarning 12982
&A watcher monitoring a logical volume changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolCritical 12983
&A watcher monitoring a logical volume changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolAdded 12986
&A watcher monitoring a logical volume was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolDeleted 12987
&A watcher monitoring a logical volume was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kLVolInfo 12988
&A watcher monitoring a logical volume changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kLVolModified 12989
&The watcher configuration for a logical volume changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kMntUnknown 13980
&A watcher monitoring a mount changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntOk 13981
&A watcher monitoring a mount changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntWarning 13982
&A watcher monitoring a mount changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntCritical 13983
&A watcher monitoring a mount changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntAdded 13986
&A watcher monitoring a mount was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntDeleted 13987
&A watcher monitoring a mount was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kMntInfo 13988
&A watcher monitoring a mount changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kMntModified 13989
&The watcher configuration for a mount changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kDfsUnknown 14980
&A watcher monitoring a distributed file system link changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsOk 14981
&A watcher monitoring a distributed file system link changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsWarning 14982
&A watcher monitoring a distributed file system link changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsCritical 14983
&A watcher monitoring a distributed file system link changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsAdded 14986
&A watcher monitoring a distributed file system link was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsDeleted 14987
&A watcher monitoring a distributed file system link was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDfsInfo 14988
&A watcher monitoring a distributed file system link changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kDfsModified 14989
&The watcher configuration for a distributed file system link changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kQuotUnknown 15980
&A watcher monitoring a quota changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotOk 15981
&A watcher monitoring a quota changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotWarning 15982
&A watcher monitoring a quota changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotCritical 15983
&A watcher monitoring a quota changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotAdded 15986
&A watcher monitoring a quota was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotDeleted 15987
&A watcher monitoring a quota was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kQuotInfo 15988
&A watcher monitoring a quota changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kQuotModified 15989
&The watcher configuration for a quota changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kDirUnknown 16980
&A watcher monitoring a directory changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirOk 16981
&A watcher monitoring a directory changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirWarning 16982
&A watcher monitoring a directory changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirCritical 16983
&A watcher monitoring a directory changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirAdded 16986
&A watcher monitoring a directory was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirDeleted 16987
&A watcher monitoring a directory was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kDirInfo 16988
&A watcher monitoring a directory changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kDirModified 16989
&The watcher configuration for a directory changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kFileUnknown 17980
&A watcher monitoring a file changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileOk 17981
&A watcher monitoring a file changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileWarning 17982
&A watcher monitoring a file changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileCritical 17983
&A watcher monitoring a file changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileAdded 17986
&A watcher monitoring a file was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileDeleted 17987
&A watcher monitoring a file was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kFileInfo 17988
&A watcher monitoring a file changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kFileModified 17989
&The watcher configuration for a file changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kProcUnknown 18980
&A watcher monitoring a process changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcOk 18981
&A watcher monitoring a process changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcWarning 18982
&A watcher monitoring a process changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcCritical 18983
&A watcher monitoring a process changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcAdded 18986
&A watcher monitoring a process was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcDeleted 18987
&A watcher monitoring a process was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kProcInfo 18988
&A watcher monitoring a process changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kProcModified 18989
&The watcher configuration for a process changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kSrvcUnknown 19980
&A watcher monitoring a service changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcOk 19981
&A watcher monitoring a service changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcWarning 19982
&A watcher monitoring a service changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcCritical 19983
&A watcher monitoring a service changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcAdded 19986
&A watcher monitoring a service was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcDeleted 19987
&A watcher monitoring a service was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSrvcInfo 19988
&A watcher monitoring a service changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kSrvcModified 19989
&The watcher configuration for a service changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kJobUnknown 20980
&A watcher monitoring a job changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobOk 20981
&A watcher monitoring a job changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobWarning 20982
&A watcher monitoring a job changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobCritical 20983
&A watcher monitoring a job changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobAdded 20986
&A watcher monitoring a job was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobDeleted 20987
&A watcher monitoring a job was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kJobInfo 20988
&A watcher monitoring a job changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kJobModified 20989
&The watcher configuration for a job changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kSessUnknown 21980
&A watcher monitoring a session changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessOk 21981
&A watcher monitoring a session changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessWarning 21982
&A watcher monitoring a session changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessCritical 21983
&A watcher monitoring a session changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessAdded 21986
&A watcher monitoring a session was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessDeleted 21987
&A watcher monitoring a session was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kSessInfo 21988
&A watcher monitoring a session changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kSessModified 21989
&The watcher configuration for a session changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kPrnUnknown 22980
&A watcher monitoring a printer changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnOk 22981
&A watcher monitoring a printer changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnWarning 22982
&A watcher monitoring a printer changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnCritical 22983
&A watcher monitoring a printer changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnAdded 22986
&A watcher monitoring a printer was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnDeleted 22987
&A watcher monitoring a printer was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kPrnInfo 22988
&A watcher monitoring a printer changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kPrnModified 22989
&The watcher configuration for a printer changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kNetTotalUnknown 23000
&The watcher monitoring the network interfaces total changed its status to 'unknown'.
TRAP-TYPE    

w2kNetTotalOk 23001
&The watcher monitoring the network interfaces total changed its status to 'ok'.
TRAP-TYPE    

w2kNetTotalWarning 23002
&The watcher monitoring the network interfaces total changed its status to 'warning'.
TRAP-TYPE    

w2kNetTotalCritical 23003
&The watcher monitoring the network interfaces total changed its status to 'critical'.
TRAP-TYPE    

w2kNetTotalInfo 23008
&The watcher monitoring the network interfaces total changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kNetTotalModified 23009
&The watcher configuration for the network interfaces total changed. The varbind list contains the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kNetUnknown 23990
&A watcher monitoring a network interface changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetOk 23991
&A watcher monitoring a network interface changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetWarning 23992
&A watcher monitoring a network interface changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetCritical 23993
&A watcher monitoring a network interface changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetAdded 23996
&A watcher monitoring a network interface was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetDeleted 23997
&A watcher monitoring a network interface was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kNetInfo 23998
&A watcher monitoring a network interface changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kNetModified 23999
&The watcher configuration for a network interface changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE    

w2kRegUnknown 24980
&A watcher monitoring a registry entry changed its status to 'unknown'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegOk 24981
&A watcher monitoring a registry entry changed its status to 'ok'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegWarning 24982
&A watcher monitoring a registry entry changed its status to 'warning'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegCritical 24983
&A watcher monitoring a registry entry changed its status to 'critical'. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegAdded 24986
&A watcher monitoring a registry entry was added. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegDeleted 24987
&A watcher monitoring a registry entry was removed. The varbind list contains the name of the involved resource.
TRAP-TYPE    

w2kRegInfo 24988
&A watcher monitoring a registry entry changed a substatus. The varbind list contains detailed information in one string.
TRAP-TYPE    

w2kRegModified 24989
&The watcher configuration for a registry entry changed. The varbind list contains the name of the involved resource, the changed attribute with its old value and with its new value.
TRAP-TYPE