C-PRODUCT-IMA-MIB

File: C-PRODUCT-IMA-MIB.mib (14261 bytes)

Imported modules

C-PRODUCT-GROUP-MIB C-PRODUCT-BASE-MIB RFC-1212

Imported symbols

ima portSlot portNumber
PortOperStatus OBJECT-TYPE

Defined Types

AfaStatus  
INTEGER off(1), on(2)    

AfaActRate  
INTEGER act-rate-10-4(1), act-rate-10-5(2), act-rate-10-6(3), act-rate-10-7(4)    

AfaDeactRate  
INTEGER deact-rate-10-6(1), deact-rate-10-7(2), deact-rate-10-8(3), deact-rate-10-9(4)    

InbLoopBackStatus  
INTEGER disabled(1), enabled(2)    

ImaCardEntry  
SEQUENCE    
  imaCardGroupSize INTEGER
  imaCardTrafficType INTEGER
  imaCardRefPort INTEGER
  imaCardNextAvailableGroup INTEGER

ImaPortEntry  
SEQUENCE    
  imaPortLBO INTEGER
  imaPortLineCode INTEGER
  imaPortFraming INTEGER
  imaPortTiming INTEGER
  imaPortGainLimit INTEGER
  imaPortImaGroupId INTEGER
  imaPortImaTxLid INTEGER
  imaPortImaRxLid INTEGER
  imaPortImaOperLinkDelay INTEGER
  imaPortAfa AfaStatus
  imaPortAfaActMin INTEGER
  imaPortAfaDeactMin INTEGER
  imaPortAfaActRate AfaActRate
  imaPortAfaDeactRate AfaDeactRate
  imaPortInbLoopBack InbLoopBackStatus
  imaPortApplication INTEGER

ImaCardGroupEntry  
SEQUENCE    
  imaCardGroupId INTEGER
  imaCardGroupImaId INTEGER
  imaCardGroupAdminStatus INTEGER
  imaCardGroupMinNumLinksStart INTEGER
  imaCardGroupMinNumLinksFailed INTEGER
  imaCardGroupMaxNumLinksAct INTEGER
  imaCardGroupTxImaId INTEGER
  imaCardGroupRxImaId INTEGER
  imaCardGroupTxFrameLength INTEGER
  imaCardGroupAdminLinkDelayMax INTEGER
  imaCardGroupOperLinkDelayMax INTEGER
  imaCardGroupAdminPortsBitMap INTEGER
  imaCardGroupOperPortsBitMap INTEGER
  imaCardGroupOperStatus PortOperStatus
  imaCardGroupRowStatus INTEGER

Defined Values

imaCard 1.3.6.1.4.1.43.1.12.1.1.19.1
OBJECT IDENTIFIER    

imaPort 1.3.6.1.4.1.43.1.12.1.1.19.2
OBJECT IDENTIFIER    

imaCardGroup 1.3.6.1.4.1.43.1.12.1.1.19.3
OBJECT IDENTIFIER    

imaCardTable 1.3.6.1.4.1.43.1.12.1.1.19.1.1
The IMA card information table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImaCardEntry

imaCardEntry 1.3.6.1.4.1.43.1.12.1.1.19.1.1.1
This entry object contains IMA card configuration objects.
OBJECT-TYPE    
  ImaCardEntry  

imaCardGroupSize 1.3.6.1.4.1.43.1.12.1.1.19.1.1.1.1
This object indicates the number of ports in a Group for an IMA Trunk Card. If use CTX+, this GroupSize is irrelevant.
OBJECT-TYPE    
  INTEGER 1..8  

imaCardTrafficType 1.3.6.1.4.1.43.1.12.1.1.19.1.1.1.2
This object indicates the traffic type selected for the card, cbr traffic will get higer priority. This parameter is not for a trunk card.
OBJECT-TYPE    
  INTEGER cbr(1), non-cbr(2)  

imaCardRefPort 1.3.6.1.4.1.43.1.12.1.1.19.1.1.1.3
This object indicates the clock reference port. It is altered only when the card is set to out-of-service. If is currently used by the shelf as system clock source then it can not be changed from here either.
OBJECT-TYPE    
  INTEGER 1..8  

imaCardNextAvailableGroup 1.3.6.1.4.1.43.1.12.1.1.19.1.1.1.4
This object indicates the next available IMA group number within this card, user shall reference this number as part of the indices for adding an group. The max number of group is depending on number of port of the card, 0 is returned if all groups are used.
OBJECT-TYPE    
  INTEGER 0..8  

imaPortTable 1.3.6.1.4.1.43.1.12.1.1.19.2.1
The IMA port information table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImaPortEntry

imaPortEntry 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1
This entry object contains IMA port configuration objects. The slot (portSlot) of an card entry can be from 3 to 6 (trunk or port). The port (portNumber) can be from 1 to 8.
OBJECT-TYPE    
  ImaPortEntry  

imaPortLBO 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.1
This object indicates the Line Build Out configured for the port.
OBJECT-TYPE    
  INTEGER lbo-0-0dB(1), lbo-7-5dB(2), lbo-15-0dB(3), lbo-22-5dB(4)  

imaPortLineCode 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.2
This object indicates the line coding configured for the port.
OBJECT-TYPE    
  INTEGER ami(1), t1-B8ZS(2), e1-HDB3(3)  

imaPortFraming 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.3
This object indicates the framing format configured for the port.
OBJECT-TYPE    
  INTEGER t1-D4(1), t1-ESF(2), e1-Multi-Frame(3)  

imaPortTiming 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.4
This object indicates the input clock service type configured for the port.
OBJECT-TYPE    
  INTEGER system(1), loop(2)  

imaPortGainLimit 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.5
This object indicates the Line Gain Limit configured for the port.
OBJECT-TYPE    
  INTEGER gl-26dB(1), gl-36dB(2)  

imaPortImaGroupId 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.6
This object indicates the IMA Group ID configured for the port, it is READ only from this table. The port can be selected into an IMA group by setting the imaCardGroupAdminPortsBitMap in imaCardGroupTable.
OBJECT-TYPE    
  INTEGER  

imaPortImaTxLid 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.7
This object indicates the IMA Port Tx Link id learned from the IMA protocol.
OBJECT-TYPE    
  INTEGER  

imaPortImaRxLid 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.8
This object indicates the IMA Port Rx Link id learned from the IMA protocol.
OBJECT-TYPE    
  INTEGER  

imaPortImaOperLinkDelay 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.9
This object indicates the IMA Port Operational Link Delay of the port.
OBJECT-TYPE    
  INTEGER  

imaPortAfa 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.10
This object specifies the AFA status for the port.
OBJECT-TYPE    
  AfaStatus  

imaPortAfaActMin 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.11
This object specifies the AFA kick-in period for the port.
OBJECT-TYPE    
  INTEGER 1..15  

imaPortAfaDeactMin 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.12
This object specifies the AFA recover period for the port.
OBJECT-TYPE    
  INTEGER 15..30  

imaPortAfaActRate 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.13
This object specifies the AFA kick-in error rate for the port.
OBJECT-TYPE    
  AfaActRate  

imaPortAfaDeactRate 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.14
This object specifies the AFA recover error rate for the port.
OBJECT-TYPE    
  AfaDeactRate  

imaPortInbLoopBack 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.15
This object specifies the Inband Loopback status for the port.
OBJECT-TYPE    
  InbLoopBackStatus  

imaPortApplication 1.3.6.1.4.1.43.1.12.1.1.19.2.1.1.16
This object indicates the type of application configured for that port.
OBJECT-TYPE    
  INTEGER dsx(1), csu(2)  

imaCardGroupTable 1.3.6.1.4.1.43.1.12.1.1.19.3.1
The card based IMA group information table.
OBJECT-TYPE    
  SEQUENCE OF  
    ImaCardGroupEntry

imaCardGroupEntry 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1
This entry object contains IMA group configuration objects.
OBJECT-TYPE    
  ImaCardGroupEntry  

imaCardGroupId 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.1
This object is used as an index to an imaCardGroupEntry.
OBJECT-TYPE    
  INTEGER 1..8  

imaCardGroupImaId 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.2
This object is the admin IMA id of the group.
OBJECT-TYPE    
  INTEGER 0..255  

imaCardGroupAdminStatus 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.3
This object indicates the admin service status of the group.
OBJECT-TYPE    
  INTEGER out-of-service(1), in-service(2)  

imaCardGroupMinNumLinksStart 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.4
This object indicates the minimum number of links to start the group.
OBJECT-TYPE    
  INTEGER 1..8  

imaCardGroupMinNumLinksFailed 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.5
This object indicates the minimum number of links for the group to stay up, links lower than this number will declare the group to fail.
OBJECT-TYPE    
  INTEGER 1..8  

imaCardGroupMaxNumLinksAct 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.6
This object indicates the maximum number of links for the group, for a trunk IMA card, the value is the imaCardGroupSize, for a port card, it is derived from the imaCardGroupAdminPortsBitMap.
OBJECT-TYPE    
  INTEGER  

imaCardGroupTxImaId 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.7
This object indicates the transmit IMA ID. This shall show the ID assigned to imaCardGroupImaId.
OBJECT-TYPE    
  INTEGER  

imaCardGroupRxImaId 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.8
This object indicates the receive IMA ID.
OBJECT-TYPE    
  INTEGER  

imaCardGroupTxFrameLength 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.9
This object indicates the transmit frame length of the group.
OBJECT-TYPE    
  INTEGER cells-32(1), cells-64(2), cells-128(3), cells-256(4)  

imaCardGroupAdminLinkDelayMax 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.10
This object is the group admin maximum link differential delay in msec.
OBJECT-TYPE    
  INTEGER 0..100  

imaCardGroupOperLinkDelayMax 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.11
This object is the operational maximum link differential delay in msec.
OBJECT-TYPE    
  INTEGER  

imaCardGroupAdminPortsBitMap 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.12
This bit map object indicates the ports configured for the group.
OBJECT-TYPE    
  INTEGER  

imaCardGroupOperPortsBitMap 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.13
This bit map object indicates the operational ports in the group.
OBJECT-TYPE    
  INTEGER  

imaCardGroupOperStatus 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.14
This object indicates the group operational service status.
OBJECT-TYPE    
  PortOperStatus  

imaCardGroupRowStatus 1.3.6.1.4.1.43.1.12.1.1.19.3.1.1.15
This object indicates the row set action request.
OBJECT-TYPE    
  INTEGER create(1), delete(2)