BayNetworks-RCMDS-MIB

File: BayNetworks-RCMDS-MIB.mib (12555 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter Gauge OBJECT-TYPE
DisplayString wfRcmdsGroup

Defined Values

wfRcmds 1.3.6.1.4.1.18.3.5.3.18.1
OBJECT IDENTIFIER    

wfRcmdsDelete 1.3.6.1.4.1.18.3.5.3.18.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete Rcmds.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfRcmdsDisable 1.3.6.1.4.1.18.3.5.3.18.1.2
Enables or Disables Rcmds Subsystem
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsReservedPort 1.3.6.1.4.1.18.3.5.3.18.1.3
Next Local reserved port available
OBJECT-TYPE    
  INTEGER 512..1023  

wfRcmdsKerberosDefaultRealmName 1.3.6.1.4.1.18.3.5.3.18.1.4
This is the default kerberos realm name for the router
OBJECT-TYPE    
  DisplayString  

wfRcmdsKerberosKDCName 1.3.6.1.4.1.18.3.5.3.18.1.5
This is the default kerberos KDC name to which router sends kerberos ticket requests
OBJECT-TYPE    
  DisplayString  

wfRcmdsRouterHostName 1.3.6.1.4.1.18.3.5.3.18.1.6
This is the DNS host name for the router
OBJECT-TYPE    
  DisplayString  

wfRcmdsKerberosHostServiceKey 1.3.6.1.4.1.18.3.5.3.18.1.7
This secret equivalent of the content of V5SRVTAB file which contains the host principal keberos private key for the router. This can be manipulated only using the secure shell from the console
OBJECT-TYPE    
  OCTET STRING  

wfRcmdsRlogind 1.3.6.1.4.1.18.3.5.3.18.2
OBJECT IDENTIFIER    

wfRcmdsRlogindDelete 1.3.6.1.4.1.18.3.5.3.18.2.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfRcmdsRlogindDisable 1.3.6.1.4.1.18.3.5.3.18.2.2
Enables or Disables Rlogind
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRlogindState 1.3.6.1.4.1.18.3.5.3.18.2.3
State of Rlogind
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wfRcmdsRlogindMoreDisable 1.3.6.1.4.1.18.3.5.3.18.2.4
Enable the 'more' feature on the Technician Interface console
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRlogindPrompt 1.3.6.1.4.1.18.3.5.3.18.2.5
Character string which will be used as the system prompt on the Technician Interface console
OBJECT-TYPE    
  DisplayString  

wfRcmdsRlogindLoginTimeOut 1.3.6.1.4.1.18.3.5.3.18.2.6
Time out in minutes to Disconnect when at the login prompt
OBJECT-TYPE    
  INTEGER 1..99  

wfRcmdsRlogindPasswordTimeOut 1.3.6.1.4.1.18.3.5.3.18.2.7
Timout in minutes on Password entry
OBJECT-TYPE    
  INTEGER 1..99  

wfRcmdsRlogindCommandTimeOut 1.3.6.1.4.1.18.3.5.3.18.2.8
Time out in minutes to Disconnect when at the command prompt
OBJECT-TYPE    
  INTEGER 1..99  

wfRcmdsRlogindLoginRetries 1.3.6.1.4.1.18.3.5.3.18.2.9
Limit # of login attempts then Disconnect
OBJECT-TYPE    
  INTEGER 1..99  

wfRcmdsRlogindTotalLogins 1.3.6.1.4.1.18.3.5.3.18.2.10
Total number of Rlogind TI login attempts
OBJECT-TYPE    
  Counter  

wfRcmdsRlogindUserLoginErrors 1.3.6.1.4.1.18.3.5.3.18.2.11
Total number of FAILED User login attempts
OBJECT-TYPE    
  Counter  

wfRcmdsRlogindManagerLoginErrors 1.3.6.1.4.1.18.3.5.3.18.2.12
Total number of FAILED Manager login attempts
OBJECT-TYPE    
  Counter  

wfRcmdsRlogindOtherLoginErrors 1.3.6.1.4.1.18.3.5.3.18.2.13
Total number of FAILED Other login attempts
OBJECT-TYPE    
  Counter  

wfRcmdsRlogindActiveSessions 1.3.6.1.4.1.18.3.5.3.18.2.14
Total number of Rlogind TI Sessions
OBJECT-TYPE    
  Gauge  

wfRcmdsRlogindManagerAutoScript 1.3.6.1.4.1.18.3.5.3.18.2.15
for each login.
OBJECT-TYPE    
  DisplayString  

wfRcmdsRlogindUserAutoScript 1.3.6.1.4.1.18.3.5.3.18.2.16
for each login.
OBJECT-TYPE    
  DisplayString  

wfRcmdsRlogindUserAbortLogoutDisable 1.3.6.1.4.1.18.3.5.3.18.2.17
a USER from escaping out of the User Autoscript
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRlogindHistoryDepth 1.3.6.1.4.1.18.3.5.3.18.2.18
TI command history table size
OBJECT-TYPE    
  INTEGER 1..40  

wfRcmdsRlogindTcpPort 1.3.6.1.4.1.18.3.5.3.18.2.19
The TCP port on which rlogind listens. by default this is set 543, which supports kerberized rlogin
OBJECT-TYPE    
  INTEGER  

wfRcmdsRlogindTrustedHostAuthentication 1.3.6.1.4.1.18.3.5.3.18.2.20
Enables/Disables Unix trusted host authentication
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRlogindKerberosAuthentication 1.3.6.1.4.1.18.3.5.3.18.2.21
Enables/Disables Kerberos Authentication
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRlogindKerberosSessionTypeAllowed 1.3.6.1.4.1.18.3.5.3.18.2.22
Encrypted/unencrypted session allowed or not
OBJECT-TYPE    
  INTEGER both(1), encrypted(2), unencrypted(3), none(4)  

wfRcmdsRshd 1.3.6.1.4.1.18.3.5.3.18.3
OBJECT IDENTIFIER    

wfRcmdsRshdDelete 1.3.6.1.4.1.18.3.5.3.18.3.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfRcmdsRshdDisable 1.3.6.1.4.1.18.3.5.3.18.3.2
Enables or Disables Rlogind
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRshdState 1.3.6.1.4.1.18.3.5.3.18.3.3
State of Rshd
OBJECT-TYPE    
  INTEGER up(1), down(2)  

wfRcmdsRshdTotalSessions 1.3.6.1.4.1.18.3.5.3.18.3.4
Total number of Rshd command sessions executed
OBJECT-TYPE    
  Counter  

wfRcmdsRshdTcpPort 1.3.6.1.4.1.18.3.5.3.18.3.5
The TCP port on which rshd listens. by default this is set 544, which supports kerberized rlogin
OBJECT-TYPE    
  INTEGER  

wfRcmdsRshdTrustedHostAuthentication 1.3.6.1.4.1.18.3.5.3.18.3.6
Enables/Disables Unix trusted host authentication
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRshdKerberosAuthentication 1.3.6.1.4.1.18.3.5.3.18.3.7
Enables/Disables Kerberos Authentication
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfRcmdsRshdKerberosSessionTypeAllowed 1.3.6.1.4.1.18.3.5.3.18.3.8
Encrypted/unencrypted session allowed or not
OBJECT-TYPE    
  INTEGER both(1), encrypted(2), unencrypted(3), none(4)  

wfRcmdsRshdRcpDefaultVolume 1.3.6.1.4.1.18.3.5.3.18.3.9
The file system volume number to which transferred files will be written and from which they will be retrieved. The volume number corresponds to the slot number on which the volume resides. On systems with a floppy disk, the value 65 represents volume 'A'.
OBJECT-TYPE    
  INTEGER volume1(1), volume2(2), volume3(3), volume4(4), volume5(5), volume6(6), volume7(7), volume8(8), volume9(9), volume10(10), volume11(11), volume12(12), volume13(13), volume14(14), volumea(65)