BayNetworks-BPKG-MIB

File: BayNetworks-BPKG-MIB.mib (17718 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
Wellfleet-COMMON-MIB

Imported symbols

Counter OBJECT-TYPE DisplayString
wfBacPktGenGroup

Defined Types

WfBacPktGenCxpEntry  
SEQUENCE    
  wfBacPktGenCxpDelete INTEGER
  wfBacPktGenCxpId INTEGER
  wfBacPktGenStreamMask Counter

WfBacPktGenCctEntry  
SEQUENCE    
  wfBacPktGenCctDelete INTEGER
  wfBacPktGenCctNumber INTEGER
  wfBacPktGenCctState INTEGER
  wfBacPktGenCctName DisplayString

WfBacPktGenPktGrpEntry  
SEQUENCE    
  wfBacPktGenPktGrpNumber INTEGER
  wfBacPktGenPktGrpDelay1 INTEGER
  wfBacPktGenPktGrpDelay2 INTEGER
  wfBacPktGenPktGrpDelay3 INTEGER
  wfBacPktGenPktGrpDelay4 INTEGER
  wfBacPktGenPktGrpCount1 INTEGER
  wfBacPktGenPktGrpCount2 INTEGER
  wfBacPktGenPktGrpCount3 INTEGER
  wfBacPktGenPktGrpCount4 INTEGER
  wfBacPktGenPktSeedSum Counter
  wfBacPktGenPktGrpCxp INTEGER

WfBacPktGenStrmCtrlEntry  
SEQUENCE    
  wfBacPktGenStrmNumber INTEGER
  wfBacPktGenStrmCxp INTEGER
  wfBacPktGenStrmState INTEGER
  wfBacPktGenSetStrmPktGrp INTEGER
  wfBacPktGenStrmPktGrp INTEGER

Defined Values

wfBacPktGenBase 1.3.6.1.4.1.18.3.3.2.4.1.1
OBJECT IDENTIFIER    

wfBacPktGenDelete 1.3.6.1.4.1.18.3.3.2.4.1.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBacPktGenDisable 1.3.6.1.4.1.18.3.3.2.4.1.1.2
Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable BAC PktGen.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

wfBacPktGenState 1.3.6.1.4.1.18.3.3.2.4.1.1.3
The current state of the entire BAC PktGen: up - BAC PktGen is sending and receiving frames; down - BAC PktGen is disabled; init - BAC PktGen is initializing; notpresent - BAC PktGen is not present.
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfBacPktGenTxTabSum 1.3.6.1.4.1.18.3.3.2.4.1.1.4
Total number of TXTAB records added to CXP's.
OBJECT-TYPE    
  Counter  

wfBacPktGenRxTabSum 1.3.6.1.4.1.18.3.3.2.4.1.1.5
Total number of RXTAB records added to CXP's.
OBJECT-TYPE    
  Counter  

wfBacPktGenCxpTable 1.3.6.1.4.1.18.3.3.2.4.1.2
The BAC PktGen CXP table contains relevant information concerning packet generation on each CXP. Note that, the processing of PktGen CXP entries supercedes that of wfBacPktGenCxpGlobal MIB record.
OBJECT-TYPE    
  SEQUENCE OF  
    WfBacPktGenCxpEntry

wfBacPktGenCxpEntry 1.3.6.1.4.1.18.3.3.2.4.1.2.1
Information concerning packet generation on the CXP.
OBJECT-TYPE    
  WfBacPktGenCxpEntry  

wfBacPktGenCxpDelete 1.3.6.1.4.1.18.3.3.2.4.1.2.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen CXP table entry.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBacPktGenCxpId 1.3.6.1.4.1.18.3.3.2.4.1.2.1.2
Uniquely identifies the CXP from which test packets are generated. Currently, the CXP is identified by its slot number, which must be between 6 and 8.
OBJECT-TYPE    
  INTEGER 6..8  

wfBacPktGenStreamMask 1.3.6.1.4.1.18.3.3.2.4.1.2.1.3
Bit mask for generating test packets on the CXP streams 1-31. The least significant bit is ignored. The second least significant bit represents stream 1, the next least significant bit represents stream 2, and so forth. The most significant bit represents stream 31.
OBJECT-TYPE    
  Counter  

wfBacPktGenPktSeed 1.3.6.1.4.1.18.3.3.2.4.1.3
OBJECT IDENTIFIER    

wfBacPktGenSeedPkts 1.3.6.1.4.1.18.3.3.2.4.1.3.1
Seed/Unseed packet parameter. Default is unseedpackets. Users perform a set operation on this object in order to seed/unseed test packets.
OBJECT-TYPE    
  INTEGER seedpackets(1), unseedpackets(2)  

wfBacPktGenPktSeedState 1.3.6.1.4.1.18.3.3.2.4.1.3.2
Based on the set operation performed on the Seed/Unseed packet parameter, this object reflects the status of the operation. Default is idle. This object goes to the operationstarted state as soon as the BAC PktGen application detects the set operation on the Seed/Unseed parameter. The object remains in this state until the operation is completed, and the appropriate state is registered.
OBJECT-TYPE    
  INTEGER packetseeded(1), packetunseeded(2), operationstarted(3), idle(4)  

wfBacPktGenCxpGlobal 1.3.6.1.4.1.18.3.3.2.4.1.4
OBJECT IDENTIFIER    

wfBacPktGenCxpGlobalDelete 1.3.6.1.4.1.18.3.3.2.4.1.4.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen CXP Global record. Note that, the PktGen Global record is processed as long as no wfBacPktGenCxpEntry MIB records exist. When one or more wfBacPktGenCxpEntry MIB records are configured, the PktGen CXP Global record is ignored and its processing is disabled.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBacPktGenGlobalStreamMask 1.3.6.1.4.1.18.3.3.2.4.1.4.2
Bit mask for generating test packets on all CXP streams 1-31. The least significant bit is ignored. The second least significant bit represents stream 1, the next least significant bit represents stream 2, and so forth. The most significant bit represents stream 31.
OBJECT-TYPE    
  Counter  

wfBacPktGenGlobalRecActive 1.3.6.1.4.1.18.3.3.2.4.1.4.3
Indicates if the processing of this MIB record is active. It is active only when NO wfBacPktGenCxpEntry MIB record is configured.
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

wfBacPktGenCctTable 1.3.6.1.4.1.18.3.3.2.4.1.5
The BAC PktGen Circuit table.
OBJECT-TYPE    
  SEQUENCE OF  
    WfBacPktGenCctEntry

wfBacPktGenCctEntry 1.3.6.1.4.1.18.3.3.2.4.1.5.1
Information concerning a BAC PktGen circuit table entry.
OBJECT-TYPE    
  WfBacPktGenCctEntry  

wfBacPktGenCctDelete 1.3.6.1.4.1.18.3.3.2.4.1.5.1.1
Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen Circuit table entry.
OBJECT-TYPE    
  INTEGER created(1), deleted(2)  

wfBacPktGenCctNumber 1.3.6.1.4.1.18.3.3.2.4.1.5.1.2
BAC PktGen circuit number.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenCctState 1.3.6.1.4.1.18.3.3.2.4.1.5.1.3
The current state of the BAC PktGen circuit: up - The circuit is up; down - The circuit is down; init - The circuit is initializing; notpresent - The circuit is not present.
OBJECT-TYPE    
  INTEGER up(1), down(2), init(3), notpresent(4)  

wfBacPktGenCctName 1.3.6.1.4.1.18.3.3.2.4.1.5.1.4
BAC PktGen circuit name.
OBJECT-TYPE    
  DisplayString  

wfBacPktGenPktFile 1.3.6.1.4.1.18.3.3.2.4.1.6
OBJECT IDENTIFIER    

wfBacPktGenPktFileAppend 1.3.6.1.4.1.18.3.3.2.4.1.6.1
Append disable/enable parameter. Default is to release previous table contents instead of appending to previously processed pkt files. This feature is currently not supported.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wfBacPktGenPktFileName 1.3.6.1.4.1.18.3.3.2.4.1.6.2
The user-defined name of the pktfile to process.
OBJECT-TYPE    
  DisplayString  

wfBacPktGenPktGrpTable 1.3.6.1.4.1.18.3.3.2.4.1.7
The BAC PktGen packet group table.
OBJECT-TYPE    
  SEQUENCE OF  
    WfBacPktGenPktGrpEntry

wfBacPktGenPktGrpEntry 1.3.6.1.4.1.18.3.3.2.4.1.7.1
Information concerning a BAC PktGen packet group table entry.
OBJECT-TYPE    
  WfBacPktGenPktGrpEntry  

wfBacPktGenPktGrpNumber 1.3.6.1.4.1.18.3.3.2.4.1.7.1.1
Uniquely identifies the packet group number.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpDelay1 1.3.6.1.4.1.18.3.3.2.4.1.7.1.2
Delay parameter 1 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpDelay2 1.3.6.1.4.1.18.3.3.2.4.1.7.1.3
Delay parameter 2 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpDelay3 1.3.6.1.4.1.18.3.3.2.4.1.7.1.4
Delay parameter 3 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpDelay4 1.3.6.1.4.1.18.3.3.2.4.1.7.1.5
Delay parameter 4 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpCount1 1.3.6.1.4.1.18.3.3.2.4.1.7.1.6
Count parameter 1 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpCount2 1.3.6.1.4.1.18.3.3.2.4.1.7.1.7
Count parameter 2 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpCount3 1.3.6.1.4.1.18.3.3.2.4.1.7.1.8
Count parameter 3 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktGrpCount4 1.3.6.1.4.1.18.3.3.2.4.1.7.1.9
Count parameter 4 for this packet group.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenPktSeedSum 1.3.6.1.4.1.18.3.3.2.4.1.7.1.10
Total number of packet seeds that belong to this packet group.
OBJECT-TYPE    
  Counter  

wfBacPktGenPktGrpCxp 1.3.6.1.4.1.18.3.3.2.4.1.7.1.11
The eligible CXP slot number on which this packet group can be thrown.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenStrmCtrlTable 1.3.6.1.4.1.18.3.3.2.4.1.8
The BAC PktGen stream control table.
OBJECT-TYPE    
  SEQUENCE OF  
    WfBacPktGenStrmCtrlEntry

wfBacPktGenStrmCtrlEntry 1.3.6.1.4.1.18.3.3.2.4.1.8.1
Information concerning a BAC PktGen stream control table entry.
OBJECT-TYPE    
  WfBacPktGenStrmCtrlEntry  

wfBacPktGenStrmNumber 1.3.6.1.4.1.18.3.3.2.4.1.8.1.1
Uniquely identifies the PktGen stream number on each CXP.
OBJECT-TYPE    
  INTEGER 1..31  

wfBacPktGenStrmCxp 1.3.6.1.4.1.18.3.3.2.4.1.8.1.2
Uniquely identifies the CXP.
OBJECT-TYPE    
  INTEGER 6..8  

wfBacPktGenStrmState 1.3.6.1.4.1.18.3.3.2.4.1.8.1.3
The current state of this PktGen stream: pktgen - Stream is transmitting test packets; killed - Stream is being killed; notpresent - Stream is not present.
OBJECT-TYPE    
  INTEGER pktgen(1), killed(2), notpresent(4)  

wfBacPktGenSetStrmPktGrp 1.3.6.1.4.1.18.3.3.2.4.1.8.1.4
Set the packet group to be thrown by this PktGen stream.
OBJECT-TYPE    
  INTEGER  

wfBacPktGenStrmPktGrp 1.3.6.1.4.1.18.3.3.2.4.1.8.1.5
The packet group which will be thrown by this PktGen stream.
OBJECT-TYPE    
  INTEGER