BW-BroadworksEMS-MIB
File:
BW-BroadworksEMS-MIB.mib (119945 bytes)
Imported modules
Imported symbols
Defined Types
RowStatus |
|
INTEGER |
active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6) |
|
|
WebNMSSchedulerEntry |
|
SEQUENCE |
|
|
|
|
webNMSSchedulerIndex |
Integer32 |
|
|
webNMSSchedulerDesc |
DisplayString |
|
|
webNMSSchedulerNumTasks |
Integer32 |
|
|
webNMSSchedulerNumThreads |
Integer32 |
|
|
webNMSSchedulerActiveThreads |
Integer32 |
|
|
webNMSSchedulerIdleThreads |
Integer32 |
|
MoEntry |
|
SEQUENCE |
|
|
|
|
moNameIndex |
DisplayString |
|
|
moOwnerName |
DisplayString |
|
|
moType |
DisplayString |
|
|
moFailureCount |
Integer32 |
|
|
moFailureThreshold |
Integer32 |
|
|
moManaged |
TruthValue |
|
|
moStatus |
Integer32 |
|
|
moStatusChangeTime |
Gauge32 |
|
|
moStatusUpdateTime |
Gauge32 |
|
|
moPollInterval |
TimeTicks |
|
|
moUserProperties |
DisplayString |
|
|
moDerivedProperties |
DisplayString |
|
|
inheritingOid1 |
OBJECT IDENTIFIER |
|
|
inheritingTableName1 |
DisplayString |
|
TopoObjEntry |
|
SEQUENCE |
|
|
|
|
ipAddress |
IpAddress |
|
|
netmask |
IpAddress |
|
|
moCommunity |
DisplayString |
|
|
moWriteCommunity |
DisplayString |
|
|
snmpPort |
Integer32 |
|
|
isDHCP |
DisplayString |
|
|
baseMibs |
DisplayString |
|
|
version |
DisplayString |
|
|
userName |
DisplayString |
|
|
contextName |
DisplayString |
|
|
inheritingOid2 |
OBJECT IDENTIFIER |
|
|
inheritingTableName2 |
DisplayString |
|
NetworkEntry |
|
SEQUENCE |
|
|
|
|
discover |
DisplayString |
|
|
discoverStatus |
Integer32 |
|
|
inheritingOid3 |
OBJECT IDENTIFIER |
|
|
inheritingTableName3 |
DisplayString |
|
NodeEntry |
|
SEQUENCE |
|
|
|
|
isRouter |
DisplayString |
|
|
inheritingOid4 |
OBJECT IDENTIFIER |
|
|
inheritingTableName4 |
DisplayString |
|
IpAddressEntry |
|
SEQUENCE |
|
|
|
|
parentNode |
DisplayString |
|
|
parentNet |
IpAddress |
|
|
inheritingOid5 |
OBJECT IDENTIFIER |
|
|
inheritingTableName5 |
DisplayString |
|
SnmpNodeEntry |
|
SEQUENCE |
|
|
|
|
hostNetMask |
IpAddress |
|
|
sysDesc |
DisplayString |
|
|
sysName |
DisplayString |
|
|
sysOid |
OBJECT IDENTIFIER |
|
|
inheritingOid6 |
OBJECT IDENTIFIER |
|
|
inheritingTableName6 |
DisplayString |
|
SnmpInterfaceEntry |
|
SEQUENCE |
|
|
|
|
hostnetMask |
IpAddress |
|
|
ifIndex |
Integer32 |
|
|
physMedia |
DisplayString |
|
|
physAddress |
DisplayString |
|
|
ifSpeed |
Integer32 |
|
|
ifDesc |
DisplayString |
|
|
sysOID |
OBJECT IDENTIFIER |
|
|
inheritingOid7 |
OBJECT IDENTIFIER |
|
|
inheritingTableName7 |
DisplayString |
|
MoDerivedPropNameEntry |
|
SEQUENCE |
|
|
|
|
indexNum |
Integer32 |
|
|
objClassName |
DisplayString |
|
|
derivedPropNames |
DisplayString |
|
|
tableOid |
OBJECT IDENTIFIER |
|
|
tableName |
DisplayString |
|
AlertEntry |
|
SEQUENCE |
|
|
|
|
alertEntity |
DisplayString |
|
|
alertOwnerName |
DisplayString |
|
|
alertCreateTime |
Gauge32 |
|
|
alertSource |
DisplayString |
|
|
alertModTime |
Gauge32 |
|
|
alertSeverity |
Integer32 |
|
|
alertPreviousSeverity |
Integer32 |
|
|
alertCategory |
DisplayString |
|
|
alertUserProperties |
DisplayString |
|
EventEntry |
|
SEQUENCE |
|
|
|
|
evtID |
Integer32 |
|
|
evtSource |
DisplayString |
|
|
evtEntity |
DisplayString |
|
|
evtSeverity |
Integer32 |
|
|
evtCategory |
DisplayString |
|
|
evtTime |
Gauge32 |
|
|
evtText |
DisplayString |
|
|
eventUserProperties |
DisplayString |
|
AlarmEntry |
|
SEQUENCE |
|
|
|
|
alarmSource |
DisplayString |
|
|
alarmOwnerName |
DisplayString |
|
|
alarmEntity |
DisplayString |
|
|
alarmSeverity |
Integer32 |
|
|
alarmPreviousSeverity |
Integer32 |
|
|
alarmCreateTime |
Gauge32 |
|
|
alarmModTime |
Gauge32 |
|
|
alarmCategory |
DisplayString |
|
|
alarmAssignedTo |
DisplayString |
|
|
alarmUserProperties |
DisplayString |
|
PollEntry |
|
SEQUENCE |
|
|
|
|
pollid |
Gauge32 |
|
|
polldataName |
DisplayString |
|
|
oid |
DisplayString |
|
|
pollingInterval |
Gauge32 |
|
|
failureCount |
Integer32 |
|
|
failureThreshold |
Integer32 |
|
|
timeToPoll |
Gauge32 |
|
|
polledTime |
Gauge32 |
|
|
agentName |
DisplayString |
|
ThresholdEntry |
|
SEQUENCE |
|
|
|
|
thresholdObjectName |
DisplayString |
|
|
thresholdKind |
DisplayString |
|
|
thresholdMessage |
DisplayString |
|
|
thresholdClearMessage |
DisplayString |
|
|
thresholdSeverity |
Integer32 |
|
|
thresholdCategory |
DisplayString |
|
NotiLogEntry |
|
SEQUENCE |
|
|
|
|
notiLogIndex |
Integer32 |
|
|
notiLogTime |
Gauge32 |
|
|
notiLogNumVarBinds |
Integer32 |
|
|
notiLogOid |
OBJECT IDENTIFIER |
|
VarbindLogEntry |
|
SEQUENCE |
|
|
|
|
varbindIndex |
Integer32 |
|
|
varbindType |
INTEGER |
|
|
varbindValue |
DisplayString |
|
ProxyEntry |
|
SEQUENCE |
|
|
|
|
serialNumber |
Integer32 |
|
|
hostName |
DisplayString |
|
|
devicePort |
Integer32 |
|
|
requestOid |
OBJECT IDENTIFIER |
|
|
community |
DisplayString |
|
|
service |
INTEGER |
|
|
result |
DisplayString |
|
SubAgentEntry |
|
SEQUENCE |
|
|
|
|
subAgentoid |
OBJECT IDENTIFIER |
|
|
subAgent |
DisplayString |
|
|
subAgentPort |
Unsigned32 |
|
|
subAgentVersion |
Integer32 |
|
|
subAgentCommunity |
DisplayString |
|
|
timeout |
Unsigned32 |
|
|
subAgentRetries |
Unsigned32 |
|
|
rowStatus |
RowStatus |
|
V1v2TrapForwardingEntry |
|
SEQUENCE |
|
|
|
|
v1v2ManagerHost |
IpAddress |
|
|
v1v2ManagerPort |
Integer32 |
|
|
v1v2ManagerVersion |
Integer32 |
|
|
v1v2ManagerCommunity |
DisplayString |
|
|
v1v2ManagerTimeOut |
Unsigned32 |
|
|
v1v2ManagerRetries |
Unsigned32 |
|
|
v1v2ManagerStatus |
RowStatus |
|
V3TrapForwardingEntry |
|
SEQUENCE |
|
|
|
|
v3ManagerHost |
IpAddress |
|
|
v3ManagerPort |
Integer32 |
|
|
v3ManagerVersion |
Integer32 |
|
|
v3ManagerCommunity |
DisplayString |
|
|
v3ManagerUserName |
DisplayString |
|
|
v3ManagerUserSecModel |
Unsigned32 |
|
|
v3ManagerUserSecLevel |
Integer32 |
|
|
v3ManagerUserContextName |
DisplayString |
|
|
v3ManagerTimeOut |
Unsigned32 |
|
|
v3ManagerRetries |
Unsigned32 |
|
|
v3ManagerStatus |
RowStatus |
|
NetworkDiscoveryEntry |
|
SEQUENCE |
|
|
|
|
networkDiscoveryIndex |
Integer32 |
|
|
netIPAddress |
IpAddress |
|
|
netMask |
IpAddress |
|
|
startIPAddress |
DisplayString |
|
|
endIPAddress |
DisplayString |
|
|
doDiscovery |
TruthValue |
|
|
dhcp |
TruthValue |
|
NodeDiscoveryEntry |
|
SEQUENCE |
|
|
|
|
nodeIP |
IpAddress |
|
|
nodeNetMask |
IpAddress |
|
|
nodeDiscoverEnable |
TruthValue |
|
|
snmpAgentPort |
Integer32 |
|
|
nodeCommunity |
DisplayString |
|
|
snmpVersion |
INTEGER |
|
|
v3UserName |
DisplayString |
|
|
v3ContextName |
DisplayString |
|
MoCriteriaEntry |
|
SEQUENCE |
|
|
|
|
criteriaIndex |
Integer32 |
|
|
propertyName |
INTEGER |
|
|
propertyValue |
DisplayString |
|
|
allow |
TruthValue |
|
DiscoveryFilterEntry |
|
SEQUENCE |
|
|
|
|
discFilterIndex |
Integer32 |
|
|
discFilterClassName |
DisplayString |
|
TrapFilterEntry |
|
SEQUENCE |
|
|
|
|
trapFilterIndex |
Integer32 |
|
|
alertFilterClassName |
DisplayString |
|
|
trapFilterName |
DisplayString |
|
|
trapFilterEnable |
TruthValue |
|
|
genericType |
DisplayString |
|
|
specificType |
DisplayString |
|
|
enterpriseOID |
DisplayString |
|
|
trapOID |
DisplayString |
|
|
setFilter |
TruthValue |
|
PollingFiltersEntry |
|
SEQUENCE |
|
|
|
|
pollingFilterIndex |
Integer32 |
|
|
pollingFilterClassName |
DisplayString |
|
LogEntry |
|
SEQUENCE |
|
|
|
|
logIndex |
Integer32 |
|
|
logFileName |
DisplayString |
|
|
logDirName |
DisplayString |
|
|
maxLines |
Integer32 |
|
|
maxFiles |
Integer32 |
|
|
linesCached |
Integer32 |
|
|
timeStamp |
TruthValue |
|
LogUserEntry |
|
SEQUENCE |
|
|
|
|
logUserIndex |
Integer32 |
|
|
logUserName |
DisplayString |
|
|
displayName |
DisplayString |
|
|
logLevel |
Integer32 |
|
|
enableLog |
TruthValue |
|
AclEntry |
|
SEQUENCE |
|
|
|
|
aclCommunity |
DisplayString |
|
|
aclAccess |
Integer32 |
|
|
aclManagers |
DisplayString |
|
|
aclStatus |
RowStatus |
|
VaclEntry |
|
SEQUENCE |
|
|
|
|
vaclmibViews |
DisplayString |
|
|
vaclviewStatus |
RowStatus |
|
Defined Values
org |
1.3 |
OBJECT IDENTIFIER |
|
|
|
dod |
1.3.6 |
OBJECT IDENTIFIER |
|
|
|
private |
1.3.6.1.4 |
OBJECT IDENTIFIER |
|
|
|
webNMS |
1.3.6.1.4.1.2162.4 |
OBJECT IDENTIFIER |
|
|
|
tftpMib |
1.3.6.1.4.1.2162.4.6 |
OBJECT IDENTIFIER |
|
|
|
subagents |
1.3.6.1.4.1.2162.4.8 |
OBJECT IDENTIFIER |
|
|
|
webNMSVersion |
1.3.6.1.4.1.2162.4.1.1 |
The version number of the AdventNet WebNMS System. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSHost |
1.3.6.1.4.1.2162.4.1.2 |
The hostname of the system in which
the AdventNet WebNMS system is executed on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSIpAddress |
1.3.6.1.4.1.2162.4.1.3 |
The ipaddress of the system in which
the AdventNet WebNMS system is executed on. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
webNMSTotalMemory |
1.3.6.1.4.1.2162.4.1.4 |
The Total memory of the device in which the WebNMS is running |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSFreeMemory |
1.3.6.1.4.1.2162.4.1.5 |
The Free memory available in the device in which the WebNMS is running |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSStartTime |
1.3.6.1.4.1.2162.4.1.6 |
This variable states the time at which the NMS Server started |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
webNMSUpTime |
1.3.6.1.4.1.2162.4.1.7 |
This variable states the duration for which the NMS Server has been running |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
webNMSShutdown |
1.3.6.1.4.1.2162.4.1.8 |
This variable is used to shutdown the NMS from the manager.
The user needs to give the login name and the password.Once,the user gives the
loginname and the password,the NMS Server shuts down.
SYNTAX:
loginName,password |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSSchedulerEntry |
1.3.6.1.4.1.2162.4.1.10.1 |
A collection of objects specific to
the WebNMS system Scheduler |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WebNMSSchedulerEntry |
|
|
webNMSSchedulerIndex |
1.3.6.1.4.1.2162.4.1.10.1.1 |
The index for the WebNMS Scheduler instance |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSSchedulerDesc |
1.3.6.1.4.1.2162.4.1.10.1.2 |
A description of the WebNMS Scheduler instance |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSSchedulerNumTasks |
1.3.6.1.4.1.2162.4.1.10.1.3 |
The number of tasks scheduled in this WebNMS
Scheduler instance |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSNumObjects |
1.3.6.1.4.1.2162.4.2.1 |
The number of objects being managed
by the AdventNet WebNMS system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSNumNetworks |
1.3.6.1.4.1.2162.4.2.2 |
The number of networks being managed
by the AdventNet WebNMS system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSNumNodes |
1.3.6.1.4.1.2162.4.2.3 |
The number of nodes being managed
by the AdventNet WebNMS system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSNumInterfaces |
1.3.6.1.4.1.2162.4.2.4 |
The number of interfaces being managed
by the AdventNet WebNMS system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
moUserPropNames |
1.3.6.1.4.1.2162.4.2.5 |
This variable indicates to the agent what all user property
values the user would like to see in the moUserProp variable of the MoTable.
This also provides for the facility of viewing all the user property-values by
specifying the word 'all' .
If the user needs to see only a few specific user property values ,then he needs
to specify them explicitly
SYNTAX1
all
SYNTAX2
userPropName1,userPropName2,...
The values for the properties will be in the following format:
userPropName1=value1,userPopName2=value2.. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moTable |
1.3.6.1.4.1.2162.4.2.6 |
This describes the details of Managed Objects |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MoEntry |
|
moEntry |
1.3.6.1.4.1.2162.4.2.6.1 |
An entry of the Mo Table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MoEntry |
|
|
moNameIndex |
1.3.6.1.4.1.2162.4.2.6.1.1 |
This variable represents the name of the Network Element.
This name should uniquely represent the MO in the network
domain across all MO types.This entry corresponds to the Name field of the
ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moOwnerName |
1.3.6.1.4.1.2162.4.2.6.1.2 |
This variable represents the Ownername of the Network Element.
This name also uniquely represents the MO in the network
domain across all MO types. This entry corresponds to the OwnerName field of the
ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moType |
1.3.6.1.4.1.2162.4.2.6.1.3 |
This variable represents the type of the Network Element
whose attributes are presented in this specific row of the MO table.This entry
corresponds to the Type field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moFailureCount |
1.3.6.1.4.1.2162.4.2.6.1.4 |
This variable represents the number of failures occuring in the network element.
This entry corresponds to the FailureCount field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
moFailureThreshold |
1.3.6.1.4.1.2162.4.2.6.1.5 |
This variable represents the minimum value for failures which acts
as the threshold.This entry corresponds to the FailureThreshold field of the
ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
moManaged |
1.3.6.1.4.1.2162.4.2.6.1.6 |
This variable states whether the mo is managed or not.This entry corresponds
to the Managed field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
moStatus |
1.3.6.1.4.1.2162.4.2.6.1.7 |
This value gives the current status of the MO.This entry corresponds to the Status
field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
moStatusChangeTime |
1.3.6.1.4.1.2162.4.2.6.1.8 |
This variable represents the time at which the status of
the mo was formally acknowledged to have changed.This entry corresponds to the
StatusChangeTime field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
moStatusUpdateTime |
1.3.6.1.4.1.2162.4.2.6.1.9 |
This variable represents the time at which the status of the
mo was formally acknowledged to have been updated.This entry corresponds to the
StatusUpdateTime field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
moPollInterval |
1.3.6.1.4.1.2162.4.2.6.1.10 |
This variable states the polling interval of the mo.This entry corresponds to the
PollInterval field of the ManagedObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
TimeTicks |
|
|
moUserProperties |
1.3.6.1.4.1.2162.4.2.6.1.11 |
The values for the user properties which the user
specifies in the moUserPropNames variable are displayed
The values will be displayed in the folloing formate
propName1=value1,porpName2=vaule2,.... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moDerivedProperties |
1.3.6.1.4.1.2162.4.2.6.1.12 |
This variable displays the values of the user defined objects ' properties
which the user specifies in the derivedPropNames variable in the
moDerivedPropNamesTable.
The values will be displayed in the following formate
propName1=value1,propName2=value2,.... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
inheritingOid1 |
1.3.6.1.4.1.2162.4.2.6.1.13 |
This variable states the oid of the table.
For example,if the discovered object is
derived from TopoObject, then, the oid of the TopoObjectTable in
this MIB will be filled here.If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName1 |
1.3.6.1.4.1.2162.4.2.6.1.14 |
This variable states the name of the table.
For example,if the discovered object is
derived from TopoObject, then, the table name TopoObjectTable
will be filled here.If the tablename is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
topoObjTable |
1.3.6.1.4.1.2162.4.2.7 |
This table contains the various topo Objects |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TopoObjEntry |
|
topoObjEntry |
1.3.6.1.4.1.2162.4.2.7.1 |
An entry of the topoObject Table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TopoObjEntry |
|
|
ipAddress |
1.3.6.1.4.1.2162.4.2.7.1.1 |
This variable states the ipAddress of the Object.This entry corresponds to the
IpAddress field of the TopoObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
netmask |
1.3.6.1.4.1.2162.4.2.7.1.2 |
This variable states the net mask of the object.This entry corresponds to the
NetMask field of the TopoObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
snmpPort |
1.3.6.1.4.1.2162.4.2.7.1.5 |
This variable states the Snmp port used by the Snmp Agent in the
Network Element. This field is valid only if the Network Element
is also an Snmp Node.This entry corresponds to the
SnmpPort field of the TopoObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
isDHCP |
1.3.6.1.4.1.2162.4.2.7.1.6 |
This variable states whether the network element supports DHCP
(i.e is the ipaddress for the network element assigned by DHCP protocol).
This entry corresponds to the IsDHCP field of the TopoObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
baseMibs |
1.3.6.1.4.1.2162.4.2.7.1.7 |
This variable states the Mibs implemented by the Snmp Agent in the
Network Element. This field is valid only if the Network Element is
also an Snmp Node.This entry corresponds to the BaseMibs field of the
TopoObject table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
version |
1.3.6.1.4.1.2162.4.2.7.1.8 |
This variable states the version used by the Snmp Agent in the Network Element.
This entry corresponds to the Version field of the TopoObject table in the database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
userName |
1.3.6.1.4.1.2162.4.2.7.1.9 |
This variable states the userName used by the SNMPv3 Agent in the Network Element.
This entry corresponds to the UserName field of the TopoObject table in the database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
contextName |
1.3.6.1.4.1.2162.4.2.7.1.10 |
This variable states the contextName used by the SNMPv3 Agent in the Network Element.
This entry corresponds to the ContextName field of the TopoObject table in the database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
inheritingOid2 |
1.3.6.1.4.1.2162.4.2.7.1.11 |
This variable states the oid of the table.
For example,if the discovered object's type is either
Node or any of its child, then, the oid of the NodeTable in
this MIB will be filled here.If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName2 |
1.3.6.1.4.1.2162.4.2.7.1.12 |
This variable states the name of the table.
For example,if the discovered object's type is either
Node or any of its child, then, the table name NodeTable
will be filled here.If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
networkTable |
1.3.6.1.4.1.2162.4.2.8 |
This table contains information about the various networks supported by the NMS |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
NetworkEntry |
|
networkEntry |
1.3.6.1.4.1.2162.4.2.8.1 |
An entry of the Network table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NetworkEntry |
|
|
discover |
1.3.6.1.4.1.2162.4.2.8.1.1 |
This variable states whether disocvery is being done on this network or not.
This entry corresponds to the Discover field of the Network table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
discoverStatus |
1.3.6.1.4.1.2162.4.2.8.1.2 |
This variable states the discovery status for the network. This entry
corresponds to the DiscoveryStatus field of the Network table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
inheritingOid3 |
1.3.6.1.4.1.2162.4.2.8.1.3 |
This variable states the oid of the table.
For example,if the discovered object is any direct
child( e.g. MyNetworkChild) of Network (or any child of
MyNetworkChild),then, the oid of the direct child's table
(e.g. MyNetworkChildTable) in this MIB will be filled here,
If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName3 |
1.3.6.1.4.1.2162.4.2.8.1.4 |
This variable states the name of the table.
For example,if the discovered object is any direct
child( e.g. MyNetworkChild) of Network (or any child of
MyNetworkChild),then, the tablename of the direct child's table
(e.g. MyNetworkChildTable) in this MIB will be filled here,
If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
nodeTable |
1.3.6.1.4.1.2162.4.2.9 |
This table describes the nodes in the NMS |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
NodeEntry |
|
nodeEntry |
1.3.6.1.4.1.2162.4.2.9.1 |
An entry of the Node table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NodeEntry |
|
|
isRouter |
1.3.6.1.4.1.2162.4.2.9.1.1 |
This variable states whether the node is a router or not. This entry
corresponds to the isRouter field of the Node table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
inheritingOid4 |
1.3.6.1.4.1.2162.4.2.9.1.2 |
This variable states the oid of the table.
For example,if the discovered object's type is either
SnmpNode or any of its child, then, the oid of the SnmpNodeTable in
this MIB will be filled here. If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName4 |
1.3.6.1.4.1.2162.4.2.9.1.3 |
This variable states the name of the table.
For example,if the discovered object's type is either
SnmpNode or any of its child, then, the tabel name SnmpNodeTable
will be filled here. If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ipAddressTable |
1.3.6.1.4.1.2162.4.2.10 |
This table describes the ipAddress objects |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
IpAddressEntry |
|
ipAddressEntry |
1.3.6.1.4.1.2162.4.2.10.1 |
An entry of the ipAddress table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddressEntry |
|
|
parentNode |
1.3.6.1.4.1.2162.4.2.10.1.1 |
This variable states the parent Node of this Interface.This entry
corresponds to the ParentNode field of the IpAddress table in the database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
parentNet |
1.3.6.1.4.1.2162.4.2.10.1.2 |
This variable states the name of the parent network to which this Interface belongs.
This entry corresponds to the ParentNode field of the IpAddress table in the database. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
inheritingOid5 |
1.3.6.1.4.1.2162.4.2.10.1.3 |
This variable states the oid of the table.
For example,if the discovered object's type is either
SnmpInterface or any of its child.Then,the oid of the SnmpInterfaceTable in
this MIB will be filled here. If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName5 |
1.3.6.1.4.1.2162.4.2.10.1.4 |
This variable states the name of the table.
For example,if the discovered object's type is either
SnmpInterface or any of its child.Then,the tabelname SnmpInterfaceTable
will be filled here. If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpNodeTable |
1.3.6.1.4.1.2162.4.2.11 |
This table describes the SNMP nodes in the WebNMS |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SnmpNodeEntry |
|
snmpNodeEntry |
1.3.6.1.4.1.2162.4.2.11.1 |
An entry of the snmpNode table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnmpNodeEntry |
|
|
hostNetMask |
1.3.6.1.4.1.2162.4.2.11.1.1 |
This variable states the netmask of the primary interface reported by the snmp agent.
This entry corresponds to the HostNetMask field of the SnmpNode table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
sysDesc |
1.3.6.1.4.1.2162.4.2.11.1.2 |
This variable states the System Descriptor of this node as reported by the snmp agent.
This entry corresponds to the SysDescr field of the SnmpNode table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysName |
1.3.6.1.4.1.2162.4.2.11.1.3 |
This variable states the System Name of this node as reported by the snmp agent.
This entry corresponds to the SysName field of the SnmpNode table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysOid |
1.3.6.1.4.1.2162.4.2.11.1.4 |
This variable states the System Object Identifier of this node as reported by the
snmp agent. This entry corresponds to the SysOid field of the SnmpNode table in
the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingOid6 |
1.3.6.1.4.1.2162.4.2.11.1.5 |
This variable states the oid of the table.
For example,if the discovered object is any direct child
( e.g. MySnmpNodeChild) of SnmpNode (or any child of MySnmpNodeChild),then,
the oid of the direct child's table(e.g. MySnmpNodeChildTable) in
this MIB will be filled here. If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName6 |
1.3.6.1.4.1.2162.4.2.11.1.6 |
This variable states the name of the table.
For example,if the discovered object is any direct child
( e.g. MySnmpNodeChild) of SnmpNode (or any child of MySnmpNodeChild),then,
the table name of the direct child's table(e.g. MySnmpNodeChildTable) in
this MIB will be filled here. If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
snmpInterfaceTable |
1.3.6.1.4.1.2162.4.2.12 |
This table describes the properties of the snmp interfaces attached to a Snmp node disocvered by
the WebNMS system. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SnmpInterfaceEntry |
|
snmpInterfaceEntry |
1.3.6.1.4.1.2162.4.2.12.1 |
An entry of the snmpInterfaceTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SnmpInterfaceEntry |
|
|
hostnetMask |
1.3.6.1.4.1.2162.4.2.12.1.1 |
This variable states the netmask of this interface reported by the snmp
agent in the node to which this interface object is attahced. This entry
corresponds to the HostNetMask field of the SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
ifIndex |
1.3.6.1.4.1.2162.4.2.12.1.2 |
This variable states the interface index reported by the snmp agent in the
node to which this interface object is attached. This entry corresponds to
the IfIndex field of the SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
physAddress |
1.3.6.1.4.1.2162.4.2.12.1.4 |
This variable states the Physical address of the interface as reported by the snmp agent.
This entry corresponds to the PhysAddr field of the SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ifSpeed |
1.3.6.1.4.1.2162.4.2.12.1.5 |
This variable states the speed of this interface as reported by the snmp agent.This
entry corresponds to the IfSpeed field of the SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
ifDesc |
1.3.6.1.4.1.2162.4.2.12.1.6 |
This variable states the descriptor of this inetrface as reported by the snmp agent.
This entry corresponds to the IfDescr field of the SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
sysOID |
1.3.6.1.4.1.2162.4.2.12.1.7 |
This variable states the System Object Identifier of this node as
reported by the snmp agent.This entry corresponds to the SysOid field of the
SnmpInterface table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingOid7 |
1.3.6.1.4.1.2162.4.2.12.1.8 |
This variable states the oid of the table.
For example,if the discovered object is
any direct child( e.g. MySnmpInterfaceChild) of SnmpInterface
(or any child of MySnmpInterfaceChild),then,
the oid of the direct child's table(e.g. MySnmpInterfaceChildTable) in
this MIB will be filled here. If the oid is .0.0 then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
inheritingTableName7 |
1.3.6.1.4.1.2162.4.2.12.1.9 |
This variable states the name of the table.
For example,if the discovered object is
any direct child( e.g. MySnmpInterfaceChild) of SnmpInterface
(or any child of MySnmpInterfaceChild),then,
the table name of the direct child's table(e.g. MySnmpInterfaceChildTable) in
this MIB will be filled here. If the table name is empty then it implies
that there is no further inheritance. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
moDerivedPropNameEntry |
1.3.6.1.4.1.2162.4.2.13.1 |
An entry of the User Object Table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MoDerivedPropNameEntry |
|
|
indexNum |
1.3.6.1.4.1.2162.4.2.13.1.1 |
This variable is an incremental integer which uniquely identifies
each entry of the table. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
objClassName |
1.3.6.1.4.1.2162.4.2.13.1.2 |
This variable indicates the class name of the user defined objects
and identifies them uniquely.The user needs to specify the
full package name of the object
For example : com.adventnet.nms.topodb.Node |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
derivedPropNames |
1.3.6.1.4.1.2162.4.2.13.1.3 |
This variable indicates the names of the derived properties of
user defined objects which will be displayed in the moDerivedProperties
variable in the MoTable.
The user must specify the names of derived properties in the following format
.SYNTAX:
propName1,propName2,... |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
tableOid |
1.3.6.1.4.1.2162.4.2.13.1.4 |
This variable states the oid of the table for the particular mo-type |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
tableName |
1.3.6.1.4.1.2162.4.2.13.1.5 |
This variable describes the table name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSNumEvents |
1.3.6.1.4.1.2162.4.3.1 |
The total Number of Events
in the AdventNet WebNMS system |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSNumAlerts |
1.3.6.1.4.1.2162.4.3.2 |
The total Number of Alerts
in the AdventNet WebNMS system |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSEventsInBuffer |
1.3.6.1.4.1.2162.4.3.3 |
The Size of the Event Queue in the
AdventNet WebNMS system |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
webNMSAlertsInBuffer |
1.3.6.1.4.1.2162.4.3.4 |
The Size of the Alert Queue in the
AdventNet WebNMS system |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alertUserPropNames |
1.3.6.1.4.1.2162.4.3.5 |
This variable indicates to the agent what all user property
values the user would like to see in the alertUserProperties variable of the AlertTable
This also provides for the facility of viewing all the user property-values by
specifying the word 'all' .
If the user needs to see only a few specific user property values ,then he needs
to specify them explicitly
SYNTAX1
all
SYNTAX2
userPropName1,userPropName2,...
The values for the properties will be in the following format:
userPropName1=value1,userPropName2=value2.. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
eventUserPropNames |
1.3.6.1.4.1.2162.4.3.6 |
This variable indicates to the agent what all user properties
value the user would like to see in the eventUserProperties variable in the EventTable
This also provides for the facility of viewing all the user property-values by
specifying the word 'all' .
If the user needs to see only a few specific user property values ,then he needs
to specify them explicitly
SYNTAX1
all
SYNTAX2
userPropName1,userPropName2,...
The values for the properties will be in the following format:
userPropName1=value1,userPropName2=value2.. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alertTable |
1.3.6.1.4.1.2162.4.3.7 |
This table describes all the elements of the alert.
This table has been deprecated since the AlertSource column
is not an index column. This table has been replaced by AlarmTable. |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlertEntry |
|
alertEntry |
1.3.6.1.4.1.2162.4.3.7.1 |
An entry of the alert table |
Status: deprecated |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlertEntry |
|
|
alertEntity |
1.3.6.1.4.1.2162.4.3.7.1.1 |
This variable states the unique source of the alert which uniquely identifies
any alert in the table.This corresponds to the Entity entry in the Alert
Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alertOwnerName |
1.3.6.1.4.1.2162.4.3.7.1.2 |
This variable states the name of the owner of the alert.This corresponds to the
OwnerName entry in the Alert Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alertCreateTime |
1.3.6.1.4.1.2162.4.3.7.1.3 |
This variable states the time of creation of the alert.This corresponds to the
CreateTime entry in the Alert Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alertSource |
1.3.6.1.4.1.2162.4.3.7.1.4 |
This variable indicates the source of the alert i.e., from where
the alert generated.This corresponds to the Source entry in the Alert
Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alertModTime |
1.3.6.1.4.1.2162.4.3.7.1.5 |
This variable states the latest time at which the alert status
was modified.This corresponds to the ModTime entry in the Alert
Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alertSeverity |
1.3.6.1.4.1.2162.4.3.7.1.6 |
This variable describes the severity of the alert in integer
format.This corresponds to the Severity entry in the Alert
Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alertPreviousSeverity |
1.3.6.1.4.1.2162.4.3.7.1.7 |
This variable states the previous severity of the alert.This corresponds to the
PreviousSeverity entry in the Alert Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alertCategory |
1.3.6.1.4.1.2162.4.3.7.1.8 |
This variable describes the category to which the alert belongs
to, in a string form.This corresponds to the Category entry in the Alert
Table in the database |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alertUserProperties |
1.3.6.1.4.1.2162.4.3.7.1.9 |
This variable describes the values ot the user properties which
the user specifies in the alertUserPropNames variable in the WebNMSFaultMib module.
The values will be displayed in the following format:
userPropName1=value1,userPropName2=value2,... |
Status: deprecated |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
eventTable |
1.3.6.1.4.1.2162.4.3.9 |
This table describes the events in the event database |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
EventEntry |
|
eventEntry |
1.3.6.1.4.1.2162.4.3.9.1 |
An entry of the event Table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EventEntry |
|
|
evtID |
1.3.6.1.4.1.2162.4.3.9.1.1 |
This variable is the unique id (primary key) of this event object.This corresponds to
the Id entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
evtSource |
1.3.6.1.4.1.2162.4.3.9.1.2 |
This variable is the source of the event.This corresponds to
the Source entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
evtEntity |
1.3.6.1.4.1.2162.4.3.9.1.3 |
This variable is the Entity (also known as Failure Object) of the Event.This corresponds to
the Entity entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
evtSeverity |
1.3.6.1.4.1.2162.4.3.9.1.4 |
This variable is the Severity of the Event object.This corresponds to
the Severity entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
evtCategory |
1.3.6.1.4.1.2162.4.3.9.1.5 |
This variable gives the category of the event, like Topology events or Threshold event etc.
This corresponds to the Category entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
evtTime |
1.3.6.1.4.1.2162.4.3.9.1.6 |
This variable is the time of occurrence (creation), in milliseconds, of this Event object.
This corresponds to the Ttime entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
evtText |
1.3.6.1.4.1.2162.4.3.9.1.7 |
This variable gives the descriptive text message of the event.This corresponds to
the Text entry in the Event Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
eventUserProperties |
1.3.6.1.4.1.2162.4.3.9.1.8 |
This variable describes the values ot the user properties which
the user specifies in the eventUserPropNames variable
The values will be displayed in the following format:
userPropName1=value1,userPropName2=value2,... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
webNMSSeverityTable |
1.3.6.1.4.1.2162.4.3.10 |
This table shows the number of alarms of a particular severity. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
WebNMSSeverityEntry |
|
webNMSSeverityEntry |
1.3.6.1.4.1.2162.4.3.10.1 |
An entry of the table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
WebNMSSeverityEntry |
|
|
severityName |
1.3.6.1.4.1.2162.4.3.10.1.1 |
This variable displays the name of severity like critical,major,minor etc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
numberOfAlarms |
1.3.6.1.4.1.2162.4.3.10.1.2 |
This variable displays the number of alarms of a particular severity. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
alarmTable |
1.3.6.1.4.1.2162.4.3.11 |
This table describes various attributes of the NMS alarms.
This is the replacement table for alertTable.This table
has the following features other than those found in alertTable:
1. AlarmSource added as the first index along with
AlarmOwnerName and AlarmEntity.
2. AlarmAssignedTo - a new column to describe the owner to
whom the alarm assigned. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AlarmEntry |
|
alarmEntry |
1.3.6.1.4.1.2162.4.3.11.1 |
An entry of the alarmTable |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AlarmEntry |
|
|
alarmSource |
1.3.6.1.4.1.2162.4.3.11.1.1 |
This variable indicates the source of the alarm i.e.,from where
the alarm generated. This corresponds to the Source entry in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alarmOwnerName |
1.3.6.1.4.1.2162.4.3.11.1.2 |
This variable states the OwnerName for the alarm.This corresponds to the
OwnerName entry in the Alert Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alarmEntity |
1.3.6.1.4.1.2162.4.3.11.1.3 |
This variable states the unique name of each alarm which is used to
identifies any alarm. This corresponds to the Entity field in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alarmSeverity |
1.3.6.1.4.1.2162.4.3.11.1.4 |
This variable describes the severity of the alarm in integer
format. This corresponds to the Severity entry in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alarmPreviousSeverity |
1.3.6.1.4.1.2162.4.3.11.1.5 |
This variable states the previous severity of the alarm.
This corresponds to the PreviousSeverity entry in the
Alert Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alarmCreateTime |
1.3.6.1.4.1.2162.4.3.11.1.6 |
This variable states the time at which the alarm has been created.
This corresponds to the CreateTime entry in the Alert Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alarmModTime |
1.3.6.1.4.1.2162.4.3.11.1.7 |
This variable states the latest time at which the alarm status
was modified. This corresponds to the ModTime entry in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
alarmCategory |
1.3.6.1.4.1.2162.4.3.11.1.8 |
This variable describes the category to which the alarm belongs
to, in a string form. This corresponds to the Category entry in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alarmAssignedTo |
1.3.6.1.4.1.2162.4.3.11.1.9 |
This variable describes the owner to whom the alarm has assigned.
This corresponds to the Who entry in the Alert
Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
alarmUserProperties |
1.3.6.1.4.1.2162.4.3.11.1.10 |
This variable describes the values of the user properties which
the user specifies in the alertUserPropNames variable in the WebNMSFaultMib module.
The values will be displayed in the following format:
userPropName1=value1,userPropName2=value2,... |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
numPollObjects |
1.3.6.1.4.1.2162.4.4.1 |
This variable displays the total number of PolledData objects
currently present in the Polling engine. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
numActivePollers |
1.3.6.1.4.1.2162.4.4.2 |
This variable displays the total number of active pollers at that time. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
numThresholdObjects |
1.3.6.1.4.1.2162.4.4.3 |
This variable displays the total number of threshold objects available |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pollTable |
1.3.6.1.4.1.2162.4.4.4 |
The table describes the polleddatas in the database |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PollEntry |
|
pollEntry |
1.3.6.1.4.1.2162.4.4.4.1 |
It describes the various entries of the performance table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PollEntry |
|
|
pollid |
1.3.6.1.4.1.2162.4.4.4.1.1 |
This variable represents the id of the PolledData.
It is assigned by the poll engine when the PolledData
is created and it is a unique value for every PolledData.This corresponds to
the Id entry in the PolledDataTable in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
polldataName |
1.3.6.1.4.1.2162.4.4.4.1.2 |
This variable represents the name of the PolledData,
which is a user assigned name for identification purposes.This corresponds to
the Name entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
oid |
1.3.6.1.4.1.2162.4.4.4.1.3 |
This variable represents the OID that is being polled
for on the agent.This corresponds to the oid entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
pollingInterval |
1.3.6.1.4.1.2162.4.4.4.1.4 |
This variable represents the polling interval of this PolledData.This corresponds to
the Period entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
failureCount |
1.3.6.1.4.1.2162.4.4.4.1.5 |
This variable represents the failureCount for this PolledData.This corresponds to
the FailureCount entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
failureThreshold |
1.3.6.1.4.1.2162.4.4.4.1.6 |
This variable represents the failureThreshold for this PolledData.This corresponds to
the FailureThreshold entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
timeToPoll |
1.3.6.1.4.1.2162.4.4.4.1.7 |
This variable states the time at which polling has to be done again.This corresponds to
the TimeVal entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
polledTime |
1.3.6.1.4.1.2162.4.4.4.1.8 |
This variable states the time at which the polling was done.This corresponds to
the LastTimeValue entry in the PolledData Table in the database |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
agentName |
1.3.6.1.4.1.2162.4.4.4.1.9 |
This variable represents the Agent Name |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
thresholdTable |
1.3.6.1.4.1.2162.4.4.5 |
A table showing all data related to threshold objects |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ThresholdEntry |
|
thresholdEntry |
1.3.6.1.4.1.2162.4.4.5.1 |
All the entries of the threshold table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ThresholdEntry |
|
|
thresholdObjectName |
1.3.6.1.4.1.2162.4.4.5.1.1 |
This variable states the name of the threshold object. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
thresholdKind |
1.3.6.1.4.1.2162.4.4.5.1.2 |
This variable states whether the threshold is of type long,string or percentage. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
thresholdMessage |
1.3.6.1.4.1.2162.4.4.5.1.3 |
This variable displays the message generated when the threshold occurs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
thresholdClearMessage |
1.3.6.1.4.1.2162.4.4.5.1.4 |
This variable displays the message to be generated on clearing of the threshold . |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
thresholdSeverity |
1.3.6.1.4.1.2162.4.4.5.1.5 |
The severity of the event generated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
thresholdCategory |
1.3.6.1.4.1.2162.4.4.5.1.6 |
This variable displays the category of this ThresholdObject.
Category of the ThresholdObject represents the category in which
the events will be generated in case of thresholds. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
statsdata |
1.3.6.1.4.1.2162.4.4.6 |
OBJECT IDENTIFIER |
|
|
|
maxRows |
1.3.6.1.4.1.2162.4.5.1 |
This variable states the maximum number of rows that can be stored in the
notilog table of the database.Once it exceeds the limit, the oldest row
will be deleted from the database and the new row will be added.We can retrieve
only that many number of rows from the notilog table as specified. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
sequenceNum |
1.3.6.1.4.1.2162.4.5.2 |
This variable represents the index number of the last transmitted notification and
is incremented by 1 whenever a notification is emitted from the agent.
This would be included as a varbind for all notification. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
notiLogTable |
1.3.6.1.4.1.2162.4.5.3 |
This table contains the general information about
the logged notifications. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
NotiLogEntry |
|
notiLogEntry |
1.3.6.1.4.1.2162.4.5.3.1 |
An entry in the notiLog table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NotiLogEntry |
|
|
notiLogIndex |
1.3.6.1.4.1.2162.4.5.3.1.1 |
This variable's purpose
is to index the entries / distinguish the rows within this table.
The value of this variable is the same as that of the
sequenceNum defined in the mib. This table backs up all the
transmitted notifications and facilitates selective
recovery of lost notifications via their sequence numbers. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
notiLogTime |
1.3.6.1.4.1.2162.4.5.3.1.2 |
This variable represents the value of sysUpTime when the
entry occurred |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
notiLogNumVarBinds |
1.3.6.1.4.1.2162.4.5.3.1.3 |
This column indicates the number of variable bindings
in the logged notification. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
notiLogOid |
1.3.6.1.4.1.2162.4.5.3.1.4 |
This column indicates the OID of the Notification definition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
varbindLogTable |
1.3.6.1.4.1.2162.4.5.4 |
This table contains the information of the varbinds
sent during sending a notification. All the varbinds to the notifications
are logged in this table except for the sequence
number of the notification which serves as an index for
this table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VarbindLogEntry |
|
varbindLogEntry |
1.3.6.1.4.1.2162.4.5.4.1 |
An entry in the Notification Log variable table. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VarbindLogEntry |
|
|
varbindIndex |
1.3.6.1.4.1.2162.4.5.4.1.1 |
This variable's purpose is to provide the
second level index to distinguish the entries / rows within
this table. This value always starts at 1 and goes upto the
maximum number of varbinds for a notification as indicated by
in the notification log table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
varbindType |
1.3.6.1.4.1.2162.4.5.4.1.2 |
This specifies the type of the varbind that was
sent as part of a Notification. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
displayString(1), gauge32(2), timeTicks(3), integer32(4), ipAddress(5), objectId(6) |
|
varbindValue |
1.3.6.1.4.1.2162.4.5.4.1.3 |
This variable provides the value of the corresponding varbind |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
serverName |
1.3.6.1.4.1.2162.4.6.1 |
This variable describes the name of the TFTP-server to or from
which a file has to be sent or obtained |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
portNum |
1.3.6.1.4.1.2162.4.6.2 |
This variable states the port at which the file has to sent or obtained
to or from the server respectively. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
sourceFile |
1.3.6.1.4.1.2162.4.6.3 |
This variable states the name of the file to be obtained from the server [GET(1)] or
sent to the server [PUT(2)]. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
destinationFile |
1.3.6.1.4.1.2162.4.6.4 |
This variable states the name of the file to be sent to the device [GET(1)] or
obtained from the device [PUT(2)]. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
tftpMode |
1.3.6.1.4.1.2162.4.6.5 |
This variable states the mode of file-transfer |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
netascii(1), octet(2) |
|
request |
1.3.6.1.4.1.2162.4.6.6 |
This variable states the operation to be performed .The operations that can
be performed are:
sending the file to a tftp server or getting a file from a tftp server.
This variable takes two values indicating the type of operation performed.
The value that this variable takes are :-
(1) getting a file from a tftp server
(2) sending a file to a tftp server |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
get(1), put(2) |
|
proxyTable |
1.3.6.1.4.1.2162.4.7.1 |
This table is used to obtain the current value of an oid from a device .The values that
the user needs to set are :
IpAddress, Port,Community, OID and service.
When the last value is set,the value for the oid is obtained |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ProxyEntry |
|
proxyEntry |
1.3.6.1.4.1.2162.4.7.1.1 |
An entry of the table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ProxyEntry |
|
|
serialNumber |
1.3.6.1.4.1.2162.4.7.1.1.1 |
An incremental integer for the purpose of identifying the row |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
hostName |
1.3.6.1.4.1.2162.4.7.1.1.2 |
This states the DNS name or IpAddress of the device from which the
value needs to be obtained |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
devicePort |
1.3.6.1.4.1.2162.4.7.1.1.3 |
The port of the device from which the value
needs to be obtained |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
requestOid |
1.3.6.1.4.1.2162.4.7.1.1.4 |
This states the oid in the device whose value is needs to be obtained. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
service |
1.3.6.1.4.1.2162.4.7.1.1.6 |
This variable takes two values ,1 and 2,which when set carry out SNMP operations:
1 for snmpGet
2 for snmpGetNext |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
wait(0), get(1), getNext(2) |
|
result |
1.3.6.1.4.1.2162.4.7.1.1.7 |
This variable displays the result of the service :snmpGet/snmpGetNext
of the specified oid in the specified device.If any of the specified data
is not correct or if the host is not functioning properly then an
exception Error in Data will be filled |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
subAgentTable |
1.3.6.1.4.1.2162.4.8.1 |
The table having the details of sub-agents |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
SubAgentEntry |
|
subAgentEntry |
1.3.6.1.4.1.2162.4.8.1.1 |
An entry in the table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SubAgentEntry |
|
|
subAgentoid |
1.3.6.1.4.1.2162.4.8.1.1.1 |
This states the oid of the sub-agent whose value is
to be obtained from the sub-agent |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
OBJECT IDENTIFIER |
|
|
subAgent |
1.3.6.1.4.1.2162.4.8.1.1.2 |
This variable states the sub-agent name to whom the request is sent. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
subAgentPort |
1.3.6.1.4.1.2162.4.8.1.1.3 |
This states the sub- Agent's Port number at which the value has to be got. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
timeout |
1.3.6.1.4.1.2162.4.8.1.1.6 |
This specifies the time period one has to wait for,to
get a response from the sub agent. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
rowStatus |
1.3.6.1.4.1.2162.4.8.1.1.8 |
This specifies the process by which the data have to be entered.
This is the first value which needs to be set..
the value of 1 specifies 'active'
the value of 2 specifies 'notInService'
the value of 3 specifies 'notReady'
the value of 4 specifies 'createAndGo'.
the value of 5 specifies 'createAndWait'
the value of 6 specifies 'destroy' |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
v1v2TrapForwardingTable |
1.3.6.1.4.1.2162.4.9.1 |
This table maintains the SNMP v1 and v2c managers information
like manager IP address, port number,community, time out,
retires, etc which are used in trap generation. Timeout and
retires are used in the case of SNMPv2c INFORM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
V1v2TrapForwardingEntry |
|
v1v2TrapForwardingEntry |
1.3.6.1.4.1.2162.4.9.1.1 |
Each entry in this table refers one manager information who
is registered to receive traps fromt the agent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
V1v2TrapForwardingEntry |
|
|
v1v2ManagerHost |
1.3.6.1.4.1.2162.4.9.1.1.1 |
IP address where the manager is listening to receive traps
from the agent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
v1v2ManagerPort |
1.3.6.1.4.1.2162.4.9.1.1.2 |
The port at which manager is listening for the traps from the
agent. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
v1v2ManagerTimeOut |
1.3.6.1.4.1.2162.4.9.1.1.5 |
The time out value in seconds for SNMPv2c INFORM. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
v1v2ManagerRetries |
1.3.6.1.4.1.2162.4.9.1.1.6 |
The number of retries in the case of SNMPV2c INFORM. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
v1v2ManagerStatus |
1.3.6.1.4.1.2162.4.9.1.1.7 |
The status of this conceptual row.Until instances of all
corresponding columns are appropriately configured, the value
of the corresponding instance of the usmUserStatus column is
'notReady' |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
v3TrapForwardingTable |
1.3.6.1.4.1.2162.4.9.2 |
This table maintains the SNMP v3 managers information like
manager IP address, port number, user name,security model,
context name, community, time out,retires, etc which are
used in trap generation.
Timeout and retires are used in the case of INFORM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
V3TrapForwardingEntry |
|
v3TrapForwardingEntry |
1.3.6.1.4.1.2162.4.9.2.1 |
Each entry in this table refers one SNMPv3 manager who will
listen for TRAP or INFORM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
V3TrapForwardingEntry |
|
|
v3ManagerHost |
1.3.6.1.4.1.2162.4.9.2.1.1 |
The IP address where the manager is listening for TRAPS or
INFORMS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
v3ManagerPort |
1.3.6.1.4.1.2162.4.9.2.1.2 |
The UDP port at which manager is listening for TRAPS or
INFORMS. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..4294967295 |
|
v3ManagerUserName |
1.3.6.1.4.1.2162.4.9.2.1.5 |
This user name is same as in USM MIB RFC 2574. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
v3ManagerUserSecModel |
1.3.6.1.4.1.2162.4.9.2.1.6 |
This security model value is same as in USM table of USM MIB
RFC2574. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
v3ManagerUserContextName |
1.3.6.1.4.1.2162.4.9.2.1.8 |
This context name is same as in VacmAccessTable of VACM
MIB RFC2575. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
v3ManagerTimeOut |
1.3.6.1.4.1.2162.4.9.2.1.9 |
The time out value in seconds for INFORM request. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
v3ManagerRetries |
1.3.6.1.4.1.2162.4.9.2.1.10 |
The number of retries for a failed INFORM reqeust. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
v3ManagerStatus |
1.3.6.1.4.1.2162.4.9.2.1.11 |
The status of this conceptual row.Until instances of all
corresponding columns are appropriately configured, the
value of the corresponding instance of the usmUserStatus
column is 'notReady' |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
httpPort |
1.3.6.1.4.1.2162.4.1.9.1 |
This describes the http port.This port can be used to open an html client
connection to the WebNMS Server |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
nmsSocketPort |
1.3.6.1.4.1.2162.4.1.9.2 |
This describes the NMS-Socket port |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
rmiRegistryPort |
1.3.6.1.4.1.2162.4.1.9.3 |
This describes the RMI-Registry port.This port can be used to open a
RMI client connection to the WebNMS Server |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trapPortTable |
1.3.6.1.4.1.2162.4.1.9.4 |
This table describes the ports at which the traps are being received by the WebNMS |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TrapPortEntry |
|
trapPortEntry |
1.3.6.1.4.1.2162.4.1.9.4.1 |
It describes an entry in the trap-port table |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrapPortEntry |
|
|
seqNum |
1.3.6.1.4.1.2162.4.1.9.4.1.1 |
An incremental integer number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
port |
1.3.6.1.4.1.2162.4.1.9.4.1.2 |
This describes the port number |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
statsdataTableName |
1.3.6.1.4.1.2162.4.4.6.1 |
This variable states the name of the table of the statsdata table,
the details of which,the user wants to view.The user needs to enter values in the
form of statsdata% or statsdataMM-DD-YY.If the user gives statsdata%,then the current
day is taken. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
statsDataTable |
1.3.6.1.4.1.2162.4.4.6.2 |
This table exposes the statsdata table of the database for the day |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
StatsDataEntry |
|
statsDataEntry |
1.3.6.1.4.1.2162.4.4.6.2.1 |
Each entry contains the data like time,oidindex and value for a particular pollid |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
StatsDataEntry |
|
|
pollID |
1.3.6.1.4.1.2162.4.4.6.2.1.1 |
This variable states the id value of the polldata |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
time |
1.3.6.1.4.1.2162.4.4.6.2.1.2 |
This variable states the time at which the data was collected |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
oidindex |
1.3.6.1.4.1.2162.4.4.6.2.1.3 |
This variable states the instance of the collected data |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
value |
1.3.6.1.4.1.2162.4.4.6.2.1.4 |
This variable states the value of the collected data |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
autoDiscover |
1.3.6.1.4.1.2162.4.10.1.1 |
This variable takes integer values like 1 for true and 2 for false.This variable
states whether the auto discovery process should start or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
discoverLocalNet |
1.3.6.1.4.1.2162.4.10.1.2 |
This variable states whether the local network should be discovered or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
discoverInterval |
1.3.6.1.4.1.2162.4.10.1.3 |
The time interval in which the discovery process should occur |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
enablelog |
1.3.6.1.4.1.2162.4.10.1.4 |
This variable states whether the logging should be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
networkDiscoveryEntry |
1.3.6.1.4.1.2162.4.10.1.9.1 |
Each entry states the discovery criteria for a network |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NetworkDiscoveryEntry |
|
|
networkDiscoveryIndex |
1.3.6.1.4.1.2162.4.10.1.9.1.1 |
This variable states the index of the network discovery table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
netIPAddress |
1.3.6.1.4.1.2162.4.10.1.9.1.2 |
This variable states the ipaddress of the network which has to be discovered |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
netMask |
1.3.6.1.4.1.2162.4.10.1.9.1.3 |
This provides for the net-mask of the network to be discovered |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
startIPAddress |
1.3.6.1.4.1.2162.4.10.1.9.1.4 |
This variable states the ipaddress from which the discovery process should
start for the network |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
endIPAddress |
1.3.6.1.4.1.2162.4.10.1.9.1.5 |
This variable states the ipaddress till which the discovery process should
proceed for the network |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
doDiscovery |
1.3.6.1.4.1.2162.4.10.1.9.1.6 |
This variable states whether a particular network should be discovered or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
dhcp |
1.3.6.1.4.1.2162.4.10.1.9.1.7 |
This variable states whether the network supports DHCP or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
nodeDiscoveryEntry |
1.3.6.1.4.1.2162.4.10.1.10.1 |
`This contains the entry of NodeDiscTable which has the criteria for discovery of a node |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
NodeDiscoveryEntry |
|
|
nodeIP |
1.3.6.1.4.1.2162.4.10.1.10.1.1 |
This variable states the ipaddress of the node to be discovered |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
nodeNetMask |
1.3.6.1.4.1.2162.4.10.1.10.1.2 |
This variable states the net mask for the discovery of the node |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
nodeDiscoverEnable |
1.3.6.1.4.1.2162.4.10.1.10.1.3 |
This variable states whether a particular node should be discovered or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
snmpAgentPort |
1.3.6.1.4.1.2162.4.10.1.10.1.4 |
This variable states the port at which the snmp agent is listening |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpVersion |
1.3.6.1.4.1.2162.4.10.1.10.1.6 |
This variable states the version of snmp |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
snmpV1(1), snmpV2c(2), snmpV3(3) |
|
v3UserName |
1.3.6.1.4.1.2162.4.10.1.10.1.7 |
This variable states the v3userName. If the snmp version is v3 then
the user name has to be given to access the node |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
v3ContextName |
1.3.6.1.4.1.2162.4.10.1.10.1.8 |
This variable states the v3contextName. If the snmp version is v3 then
the context name has to be given to access the node |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
moCriteriaTable |
1.3.6.1.4.1.2162.4.10.1.11 |
This table contains the various criteria for discovery in order to further refine the search |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
MoCriteriaEntry |
|
moCriteriaEntry |
1.3.6.1.4.1.2162.4.10.1.11.1 |
Each entry of this table contains some criteria for making the discovery process further refined |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
MoCriteriaEntry |
|
|
criteriaIndex |
1.3.6.1.4.1.2162.4.10.1.11.1.1 |
This variable uniquely identifies each entry of the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
propertyName |
1.3.6.1.4.1.2162.4.10.1.11.1.2 |
This variable states the property name on which basis the discovery should be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
name(1), type(2), ipAddress(3), sysOID(4), isSNMP(5) |
|
propertyValue |
1.3.6.1.4.1.2162.4.10.1.11.1.3 |
This variable states the value for a property,on which basis discovery should be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
allow |
1.3.6.1.4.1.2162.4.10.1.11.1.4 |
This variable states whether the criteria for discovery should be considered or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
discoveryFilterEntry |
1.3.6.1.4.1.2162.4.10.1.12.1 |
Each entry of this table has the discovery filter class name |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DiscoveryFilterEntry |
|
|
discFilterIndex |
1.3.6.1.4.1.2162.4.10.1.12.1.1 |
An incremental integer for uniquely identifying each element of the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
discFilterClassName |
1.3.6.1.4.1.2162.4.10.1.12.1.2 |
This variable states the class Name of the discovery filter file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapFilterTable |
1.3.6.1.4.1.2162.4.10.2.1 |
This table states the class names of the various trap filters |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TrapFilterEntry |
|
trapFilterEntry |
1.3.6.1.4.1.2162.4.10.2.1.1 |
Each entry of the table contains the name of the class of a trap filter |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TrapFilterEntry |
|
|
trapFilterIndex |
1.3.6.1.4.1.2162.4.10.2.1.1.1 |
The user defined name for the trap filter |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
trapFilterName |
1.3.6.1.4.1.2162.4.10.2.1.1.3 |
This variable states the name of the trap filter |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapFilterEnable |
1.3.6.1.4.1.2162.4.10.2.1.1.4 |
This variable states if the trap filter should be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
genericType |
1.3.6.1.4.1.2162.4.10.2.1.1.6 |
A property of snmp |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
enterpriseOID |
1.3.6.1.4.1.2162.4.10.2.1.1.8 |
When the snmp version is v3,this variable needs to be stated |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
trapOID |
1.3.6.1.4.1.2162.4.10.2.1.1.9 |
This variable states the oid of the trap to be sent |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
setFilter |
1.3.6.1.4.1.2162.4.10.2.1.1.10 |
0: Do nothing
1: To set trap filter |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
pollingFiltersEntry |
1.3.6.1.4.1.2162.4.10.3.1.1 |
Each entry of the table contains a poll-filter |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PollingFiltersEntry |
|
|
pollingFilterIndex |
1.3.6.1.4.1.2162.4.10.3.1.1.1 |
An incremental integer to uniquely identify each entry of the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
pollingFilterClassName |
1.3.6.1.4.1.2162.4.10.3.1.1.2 |
This variable states the class names of the polling filters used |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
stdout |
1.3.6.1.4.1.2162.4.10.4.1 |
OBJECT IDENTIFIER |
|
|
|
stderr |
1.3.6.1.4.1.2162.4.10.4.2 |
OBJECT IDENTIFIER |
|
|
|
logTable |
1.3.6.1.4.1.2162.4.10.4.3 |
This table contains data regarding the logging of values |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LogEntry |
|
logEntry |
1.3.6.1.4.1.2162.4.10.4.3.1 |
Each entry of this table states the log name and the data regarding its storage |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LogEntry |
|
|
logIndex |
1.3.6.1.4.1.2162.4.10.4.3.1.1 |
This is an incremental integer which uniquely identifies each entry of the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
logFileName |
1.3.6.1.4.1.2162.4.10.4.3.1.2 |
This variable states the file name of the log file |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
logDirName |
1.3.6.1.4.1.2162.4.10.4.3.1.3 |
This variable states the directory name of the log file |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
maxLines |
1.3.6.1.4.1.2162.4.10.4.3.1.4 |
This variable states the number of lines that can be stored in a single file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
maxFiles |
1.3.6.1.4.1.2162.4.10.4.3.1.5 |
This variable states the number of files of the same type can be formed |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
linesCached |
1.3.6.1.4.1.2162.4.10.4.3.1.6 |
This variable states the number of lines that can be cached |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
timeStamp |
1.3.6.1.4.1.2162.4.10.4.3.1.7 |
This variable states whether time-stamping need be done or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
logUserTable |
1.3.6.1.4.1.2162.4.10.4.4 |
This table states the name of the log users |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
LogUserEntry |
|
logUserEntry |
1.3.6.1.4.1.2162.4.10.4.4.1 |
Each entry of the table states the user name and the display name of the file |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
LogUserEntry |
|
|
logUserIndex |
1.3.6.1.4.1.2162.4.10.4.4.1.1 |
An incremental integer which uniquely identifies each entry of the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
logUserName |
1.3.6.1.4.1.2162.4.10.4.4.1.2 |
This variable states the name of the log user |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
displayName |
1.3.6.1.4.1.2162.4.10.4.4.1.3 |
This variable states the name which is displayed for each log user |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
logLevel |
1.3.6.1.4.1.2162.4.10.4.4.1.4 |
This variable states the level at which the logging needs to be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
enableLog |
1.3.6.1.4.1.2162.4.10.4.4.1.5 |
This variable states whether logging should be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
moName |
1.3.6.1.4.1.2162.4.2.14.3.1 |
This variable indicates the name of the MO. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moownerName |
1.3.6.1.4.1.2162.4.2.14.3.2 |
This variable represents the Ownername of the Network Element.
This name also uniquely represents the MO in the network
domain across all MO types. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
moNodeType |
1.3.6.1.4.1.2162.4.2.14.3.3 |
This variable describes the type of the MO ie whether it is node,
motwork,interface,etc. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
moEnrolTime |
1.3.6.1.4.1.2162.4.2.14.3.4 |
This variable represents the time at which the MO was formally
enrolled in the management domain |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
moDeEnrolTime |
1.3.6.1.4.1.2162.4.2.14.3.5 |
This variable represents the time at which the MO was formally
deenrolled in the management domain |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
moDataChangeTime |
1.3.6.1.4.1.2162.4.2.14.3.6 |
This variable indicates when a particular value's time of change
is formally acknowleged by the NMS. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
0..4294967295 |
|
moEnrolNotification |
1.3.6.1.4.1.2162.4.2.14.2.1 |
The NMS-Agent sends a moEnrolNotification to the manager when an MO has been
enrolled/added into management domain. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
moDeenrolNotification |
1.3.6.1.4.1.2162.4.2.14.2.2 |
The NMSAgent sends a moDeenrolNotification to the manager when an MO has been
deenrolled/deleted from the management domain |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
moAttrChangeNotification |
1.3.6.1.4.1.2162.4.2.14.2.3 |
The NMSAgent sends a moAttrChangeNotification to the manager
when any discoverd MO's one or more attributes are changed. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
alertentity |
1.3.6.1.4.1.2162.4.3.8.3.1 |
This variable states the unique source of the alert which uniquely identifies any
alert in the table |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alertownerName |
1.3.6.1.4.1.2162.4.3.8.3.2 |
This variable states the name of the owner of the alert |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alertDescription |
1.3.6.1.4.1.2162.4.3.8.3.3 |
This variable describes the alert |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alertTimeStamp |
1.3.6.1.4.1.2162.4.3.8.3.4 |
This variable indicates the time at which the alert was last modified |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alertNotificationId |
1.3.6.1.4.1.2162.4.3.8.3.5 |
This variable indicates the id of the generated alert |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
alertcategory |
1.3.6.1.4.1.2162.4.3.8.3.6 |
This variable provides a string representation of the category
of the alert |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
alertClearNotification |
1.3.6.1.4.1.2162.4.3.8.2.1 |
The NMS-Agent sends an alertClearNotification to the manager indicating that one
or more previously reported alerts have been cleared |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
alertWarningNotification |
1.3.6.1.4.1.2162.4.3.8.2.2 |
The NMS-Agent sends an alertWarningNotification to the manager indicating that an
alert of 'Warning' severity has been raised on a MO |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
alertMinorNotification |
1.3.6.1.4.1.2162.4.3.8.2.3 |
The NMS-Agent sends an alertMinorNotification to the manager indicating that a an alert
of 'Minor' severity has been raised on a MO |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
alertMajorNotification |
1.3.6.1.4.1.2162.4.3.8.2.4 |
The NMS-Agent sends an alertMajorNotification to the manager indicating that an
alert of 'Major' severity has been raised on a MO |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
alertCriticalNotification |
1.3.6.1.4.1.2162.4.3.8.2.5 |
The NMS-Agent sends an alertCriticalNotification to the manager indicating that an
alert of 'Critical' severity has been raised on a MO |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
thresholdNotification |
1.3.6.1.4.1.2162.4.4.7.1.1 |
This notification is generated for the threshold objects
which return a string value, when they exceed or fall below
a particular threshold value. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
eventid |
1.3.6.1.4.1.2162.4.4.7.2.1 |
This variable is the unique id (primary key) of this event object. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
eventsource |
1.3.6.1.4.1.2162.4.4.7.2.2 |
This variable is the source of the event |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eventEntity |
1.3.6.1.4.1.2162.4.4.7.2.3 |
This variable is the Entity (also known as Failure Object) of the Event. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
eventGenTime |
1.3.6.1.4.1.2162.4.4.7.2.4 |
This variable is the time of occurrence (creation), in milliseconds, of this Event object. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge32 |
|
|
eventSeverity |
1.3.6.1.4.1.2162.4.4.7.2.5 |
This variable is the Severity of the Event object. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
reDiscover |
1.3.6.1.4.1.2162.4.10.1.5.1 |
This variable states whether the node which is already discovered should be
discovered again or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
reDiscoverInterval |
1.3.6.1.4.1.2162.4.10.1.5.2 |
The time interval in which the rediscovery takes place |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
hour |
1.3.6.1.4.1.2162.4.10.1.5.3 |
This variable states the time in hours at whicgh the discovery should be done again |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dayOfWeek |
1.3.6.1.4.1.2162.4.10.1.5.4 |
This variable states the time in terms of the days of the week when the rediscovery is scheduled to be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dayOfMonth |
1.3.6.1.4.1.2162.4.10.1.5.5 |
This variable states the time in terms of the days of the month when the rediscovery is scheduled to be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
enableSnmpPing |
1.3.6.1.4.1.2162.4.10.1.6.1 |
This variable states if the snmp ping should be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
snmpPingRetries |
1.3.6.1.4.1.2162.4.10.1.6.2 |
The number of retries for snmp-ping while discovery |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpPingTimeout |
1.3.6.1.4.1.2162.4.10.1.6.3 |
The maximum time taken to wait for a response |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
snmpport |
1.3.6.1.4.1.2162.4.10.1.6.4 |
This variable states the snmp port |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
enableIcmp |
1.3.6.1.4.1.2162.4.10.1.7.1 |
This variable states whether icmp ping be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
icmpPingRetries |
1.3.6.1.4.1.2162.4.10.1.7.2 |
The number of retries for icmp-ping while discovery |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
nativePingRetries |
1.3.6.1.4.1.2162.4.10.1.8.1 |
The number of time native-ping must be done while discovery |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
nativePingTimeOut |
1.3.6.1.4.1.2162.4.10.1.8.2 |
This variable states the max time that need be waited for to get a response back |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
debugLevel |
1.3.6.1.4.1.2162.4.10.1.8.3 |
This variable states the debug level |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
enableSweep |
1.3.6.1.4.1.2162.4.10.1.8.4 |
This variable states whether sweep be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
sweepPkts |
1.3.6.1.4.1.2162.4.10.1.8.5 |
This variable states the number of sweep packets |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
sweepSleepInterval |
1.3.6.1.4.1.2162.4.10.1.8.6 |
This variable states the interval at which sweep must be done |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-2147483648..2147483647 |
|
name |
1.3.6.1.4.1.2162.4.10.4.1.1 |
This states the name of the file |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
directory |
1.3.6.1.4.1.2162.4.10.4.1.2 |
This states the directory in which the file will be present |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
numFiles |
1.3.6.1.4.1.2162.4.10.4.1.3 |
This states the number of files of the same type may exist |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
numLines |
1.3.6.1.4.1.2162.4.10.4.1.4 |
This states the number of lines that will be prresent in the file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
logging |
1.3.6.1.4.1.2162.4.10.4.1.5 |
This variable takes in a truth value where 1(True) implies that the file be
logged and 2(False) which implies that the file may not be logged |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
timestamp |
1.3.6.1.4.1.2162.4.10.4.1.6 |
This variable also takes in a truth value where 1(True) implies that the
time be noted during logging and 2(False) which denotes that the time not be noted |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
filename |
1.3.6.1.4.1.2162.4.10.4.2.1 |
This states the name of the file in which the logging has to be done |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
logDirectory |
1.3.6.1.4.1.2162.4.10.4.2.2 |
This states the directory in which the file will be present |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..255) |
|
filenum |
1.3.6.1.4.1.2162.4.10.4.2.3 |
This variable describes the number of files that may exist |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
linenum |
1.3.6.1.4.1.2162.4.10.4.2.4 |
This variable states the number of lines that will be present in each file |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
log |
1.3.6.1.4.1.2162.4.10.4.2.5 |
This variable takes in a truth value where 1(True) implies that the file be
logged and 2(False) which implies that the file may not be logged |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
logTime |
1.3.6.1.4.1.2162.4.10.4.2.6 |
This variable also takes in a truth value where 1(True) implies that the
time be noted during logging and 2(False) which denotes that the time not be noted |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
enableV3 |
1.3.6.1.4.1.2162.4.10.1.6.7.1 |
This variable states whether v3 be enabled or not |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
TruthValue |
|
|
v3Username |
1.3.6.1.4.1.2162.4.10.1.6.7.2 |
Whenever v3 is enabled, the user needs to give the user name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
v3Contextname |
1.3.6.1.4.1.2162.4.10.1.6.7.3 |
Whenever v3 is enabled, the user needs to give the context name |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
aclTable |
1.3.6.1.4.1.2162.4.11.1.1 |
The table maintains a set of authentication parameters like
community and its maximum access. It also has facility for
specifying the manager list for access control. This table
will be referred by the v1/v2c agent for authentication of
any incoming request. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
AclEntry |
|
aclEntry |
1.3.6.1.4.1.2162.4.11.1.1.1 |
Each entry in this table describes one valid authentication
property. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AclEntry |
|
|
aclAccess |
1.3.6.1.4.1.2162.4.11.1.1.1.2 |
The maximum access allowed for the corresponding
community. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
aclManagers |
1.3.6.1.4.1.2162.4.11.1.1.1.3 |
This variable has the managers list allowed for specified
access with specified community. The format of the string
is 'managerName1;managerName2.....' with a list of manager
IpAddress/name corresponding to each additional information
separated via ';' as the delimiter between any two managers.
The default value is '0:0:0:0' which states access for all
managers for the corresponding community. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
aclStatus |
1.3.6.1.4.1.2162.4.11.1.1.1.4 |
The status of this conceptual row in the aclTable. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|
vaclTable |
1.3.6.1.4.1.2162.4.11.1.2 |
This table furnishes the View Based Access Control
Entries for the SNMP Version 1 and Version 2 Agents
(V1/V2C Agents). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VaclEntry |
|
vaclEntry |
1.3.6.1.4.1.2162.4.11.1.2.1 |
Each Entry is based upon the Community and its allowed
views for the View Based Access Control. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VaclEntry |
|
|
vaclmibViews |
1.3.6.1.4.1.2162.4.11.1.2.1.1 |
This column represents the Mib View or Views furnished for
the corresponding communities. More Mib Views can be set by
giving a ';' as a separator. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
vaclviewStatus |
1.3.6.1.4.1.2162.4.11.1.2.1.2 |
The Status of the View Set. |
Status: current |
Access: read-create |
OBJECT-TYPE |
|
|
|
|
RowStatus |
|
|