BTI-OL-MIB

File: BTI-OL-MIB.mib (202413 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	BTI-MIB
BTI-7000-MIB	BTI-TC-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
IpAddress	Unsigned32	RowStatus
DisplayString	TEXTUAL-CONVENTION	DateAndTime
btiModules	opticalLayer	olEvtNotifications
olCondNotifications	trapSeqNum	evtDateAndTime
evtDescription	evtObjectType	evtCodeType
condReportType	condDateAndTime	condSeverity
condServiceAffecting	condDescription	condObjectType
condCodeType	tcaIntervalType	tcaDateAndTime
tcaMontype	tcaValue	tcaThreshold
CpType	BERType	AdminStatus
OperStatus	OperStatQlfr	HoursAndMinutes
FiberType	FixedX10	FixedX100
PMIntervalType	PMValidity	InitializeCmd

Defined Types

OlGroupType
Identifies the configuration type of an optical layer grouping.
TEXTUAL-CONVENTION
	INTEGER	none(1), noEqlzTerm(2), eqlzTerm(3), noEqlzLine(4), eqlzLine(5), roadm(6)

OlPortType
Identifies the type of managed optical interface port on an optical layer module.
TEXTUAL-CONVENTION
	INTEGER	line(1), client(2), dcm(3), channel(4), expansion(5)

OlGroupEntry
SEQUENCE
	olGroupIdx	INTEGER
	olGroupType	INTEGER
	olGroupId	DisplayString
	olGroupCustom1	DisplayString
	olGroupCustom2	DisplayString
	olGroupCustom3	DisplayString
	olGroupRowStatus	RowStatus

OlEqptEntry
SEQUENCE
	olEqptCpTypeIdx	CpType
	olEqptShelfIdx	INTEGER
	olEqptSlotIdx	INTEGER
	olEqptGroupNum	INTEGER
	olEqptDegreeNum	INTEGER
	olEqptRowStatus	RowStatus

OlPortEntry
SEQUENCE
	olPortCpTypeIdx	CpType
	olPortShelfIdx	INTEGER
	olPortSlotIdx	INTEGER
	olPortTypeIdx	OlPortType
	olPortIdx	INTEGER
	olPortId	DisplayString
	olPortCustom1	DisplayString
	olPortCustom2	DisplayString
	olPortCustom3	DisplayString
	olPortDWDMType	INTEGER
	olPortGrid	INTEGER
	olPortWavelength	FixedX100
	olPortFrequency	FixedX100
	olPortOperStatus	OperStatus
	olPortOperStatQlfr	OperStatQlfr
	olPortRemoteId	DisplayString
	olPortExpCnxDegree	INTEGER
	olPortActCnxDegree	INTEGER
	olPortRowStatus	RowStatus

EqptConnEntry
SEQUENCE
	eqptConnSrcCpTypeIdx	CpType
	eqptConnSrcShelfIdx	INTEGER
	eqptConnSrcSlotIdx	INTEGER
	eqptConnSrcPortTypeIdx	OlPortType
	eqptConnSrcIdx	INTEGER
	eqptConnDstCpTypeIdx	CpType
	eqptConnDstShelfIdx	INTEGER
	eqptConnDstSlotIdx	INTEGER
	eqptConnDstPortTypeIdx	OlPortType
	eqptConnDstIdx	INTEGER
	eqptConnType	INTEGER
	eqptConnRowStatus	RowStatus

OlOSCEntry
SEQUENCE
	olOSCCpTypeIdx	CpType
	olOSCShelfIdx	INTEGER
	olOSCSlotIdx	INTEGER
	olOSCLineIdx	INTEGER
	olOSCAdminStatus	AdminStatus
	olOSCOperStatus	OperStatus
	olOSCOperStatQlfr	OperStatQlfr
	olOSCAutoEnableTimer	HoursAndMinutes
	olOSCActAutoEnableTimer	HoursAndMinutes
	olOSCId	DisplayString
	olOSCCustom1	DisplayString
	olOSCCustom2	DisplayString
	olOSCCustom3	DisplayString
	olOSCFEIMMon	INTEGER
	olOSCExpFESysName	DisplayString
	olOSCExpFEIPAddr	IpAddress
	olOSCExpFEGrp	INTEGER
	olOSCExpFEDegr	INTEGER
	olOSCFESysName	DisplayString
	olOSCFEIPAddr	IpAddress
	olOSCFEGrp	INTEGER
	olOSCFEDegr	INTEGER
	olOSCFEGrpType	OlGroupType
	olOSCRowStatus	RowStatus

OdccEntry
SEQUENCE
	odccCpTypeIdx	CpType
	odccShelfIdx	INTEGER
	odccSlotIdx	INTEGER
	odccLineIdx	INTEGER
	odccAdminStatus	AdminStatus
	odccRowStatus	RowStatus

WdmEntry
SEQUENCE
	wdmCpTypeIdx	CpType
	wdmShelfIdx	INTEGER
	wdmSlotIdx	INTEGER
	wdmLineIdx	INTEGER
	wdmAdminStatus	AdminStatus
	wdmOperStatus	OperStatus
	wdmOperStatQlfr	OperStatQlfr
	wdmAutoEnableTimer	HoursAndMinutes
	wdmActAutoEnableTimer	HoursAndMinutes
	wdmId	DisplayString
	wdmCustom1	DisplayString
	wdmCustom2	DisplayString
	wdmCustom3	DisplayString
	wdmFiberType	INTEGER
	wdmSpanLength	Unsigned32
	wdmSpanLossRxHighTh	FixedX10
	wdmSpanLossSpecMax	FixedX10
	wdmNumChannels	INTEGER
	wdmRowStatus	RowStatus

WchXCEntry
SEQUENCE
	wchXCSrcCpTypeIdx	CpType
	wchXCSrcShelfIdx	INTEGER
	wchXCSrcSlotIdx	INTEGER
	wchXCSrcPortTypeIdx	OlPortType
	wchXCSrcPortIdx	INTEGER
	wchXCSrcChannelIdx	INTEGER
	wchXCDstCpTypeIdx	CpType
	wchXCDstShelfIdx	INTEGER
	wchXCDstSlotIdx	INTEGER
	wchXCDstPortTypeIdx	OlPortType
	wchXCDstPortIdx	INTEGER
	wchXCDstChannelIdx	INTEGER
	wchXCServiceName	DisplayString
	wchXCRowStatus	RowStatus

WchEntry
SEQUENCE
	wchCpTypeIdx	CpType
	wchShelfIdx	INTEGER
	wchSlotIdx	INTEGER
	wchPortTypeIdx	OlPortType
	wchPortIdx	INTEGER
	wchIdx	INTEGER
	wchAdminStatus	AdminStatus
	wchOperStatus	OperStatus
	wchOperStatQlfr	OperStatQlfr
	wchAutoEnableTimer	HoursAndMinutes
	wchActAutoEnableTimer	HoursAndMinutes
	wchId	DisplayString
	wchCustom1	DisplayString
	wchCustom2	DisplayString
	wchCustom3	DisplayString
	wchBitrate	INTEGER
	wchGrid	INTEGER
	wchWavelength	FixedX100
	wchFrequency	FixedX100
	wchRowStatus	RowStatus

OlOSCCrntPMEntry
SEQUENCE
	olOSCCrntPMCpTypeIdx	CpType
	olOSCCrntPMShelfIdx	INTEGER
	olOSCCrntPMSlotIdx	INTEGER
	olOSCCrntPMLineIdx	INTEGER
	olOSCCrntPMIntervalTypeIdx	PMIntervalType
	olOSCCrntPMOPRValue	FixedX10
	olOSCCrntPMOPRTimeStamp	DateAndTime
	olOSCCrntPMOPRValidity	PMValidity
	olOSCCrntPMOPTValue	FixedX10
	olOSCCrntPMOPTTimeStamp	DateAndTime
	olOSCCrntPMOPTValidity	PMValidity
	olOSCCrntPMOBRValue	FixedX10
	olOSCCrntPMOBRTimeStamp	DateAndTime
	olOSCCrntPMOBRValidity	PMValidity
	olOSCCrntPMCVSValue	Unsigned32
	olOSCCrntPMCVSTimeStamp	DateAndTime
	olOSCCrntPMCVSValidity	PMValidity
	olOSCCrntPMCVSInitialize	InitializeCmd
	olOSCCrntPMESSValue	Unsigned32
	olOSCCrntPMESSTimeStamp	DateAndTime
	olOSCCrntPMESSValidity	PMValidity
	olOSCCrntPMESSInitialize	InitializeCmd
	olOSCCrntPMSESSValue	Unsigned32
	olOSCCrntPMSESSTimeStamp	DateAndTime
	olOSCCrntPMSESSValidity	PMValidity
	olOSCCrntPMSESSInitialize	InitializeCmd
	olOSCCrntPMSEFSSValue	Unsigned32
	olOSCCrntPMSEFSSTimeStamp	DateAndTime
	olOSCCrntPMSEFSSValidity	PMValidity
	olOSCCrntPMSEFSSInitialize	InitializeCmd
	olOSCCrntPMUASSValue	Unsigned32
	olOSCCrntPMUASSTimeStamp	DateAndTime
	olOSCCrntPMUASSValidity	PMValidity
	olOSCCrntPMUASSInitialize	InitializeCmd

OlOSCHistPMEntry
SEQUENCE
	olOSCHistPMCpTypeIdx	CpType
	olOSCHistPMShelfIdx	INTEGER
	olOSCHistPMSlotIdx	INTEGER
	olOSCHistPMLineIdx	INTEGER
	olOSCHistPMIntervalTypeIdx	PMIntervalType
	olOSCHistPMIntervalIdx	INTEGER
	olOSCHistPMOPRValue	FixedX10
	olOSCHistPMOPRTimeStamp	DateAndTime
	olOSCHistPMOPRValidity	PMValidity
	olOSCHistPMOPTValue	FixedX10
	olOSCHistPMOPTTimeStamp	DateAndTime
	olOSCHistPMOPTValidity	PMValidity
	olOSCHistPMOBRValue	FixedX10
	olOSCHistPMOBRTimeStamp	DateAndTime
	olOSCHistPMOBRValidity	PMValidity
	olOSCHistPMCVSValue	Unsigned32
	olOSCHistPMCVSTimeStamp	DateAndTime
	olOSCHistPMCVSValidity	PMValidity
	olOSCHistPMCVSInitialize	InitializeCmd
	olOSCHistPMESSValue	Unsigned32
	olOSCHistPMESSTimeStamp	DateAndTime
	olOSCHistPMESSValidity	PMValidity
	olOSCHistPMESSInitialize	InitializeCmd
	olOSCHistPMSESSValue	Unsigned32
	olOSCHistPMSESSTimeStamp	DateAndTime
	olOSCHistPMSESSValidity	PMValidity
	olOSCHistPMSESSInitialize	InitializeCmd
	olOSCHistPMSEFSSValue	Unsigned32
	olOSCHistPMSEFSSTimeStamp	DateAndTime
	olOSCHistPMSEFSSValidity	PMValidity
	olOSCHistPMSEFSSInitialize	InitializeCmd
	olOSCHistPMUASSValue	Unsigned32
	olOSCHistPMUASSTimeStamp	DateAndTime
	olOSCHistPMUASSValidity	PMValidity
	olOSCHistPMUASSInitialize	InitializeCmd

OlOSCPMThresholdEntry
SEQUENCE
	olOSCPMThresholdCpTypeIdx	CpType
	olOSCPMThresholdShelfIdx	INTEGER
	olOSCPMThresholdSlotIdx	INTEGER
	olOSCPMThresholdLineIdx	INTEGER
	olOSCPMThresholdIntervalTypeIdx	PMIntervalType
	olOSCPMThresholdCVSValue	Unsigned32
	olOSCPMThresholdESSValue	Unsigned32
	olOSCPMThresholdSESSValue	Unsigned32
	olOSCPMThresholdSEFSSValue	Unsigned32
	olOSCPMThresholdUASSValue	Unsigned32

OlPortCrntPMEntry
SEQUENCE
	olPortCrntPMCpTypeIdx	CpType
	olPortCrntPMShelfIdx	INTEGER
	olPortCrntPMSlotIdx	INTEGER
	olPortCrntPMTypeIdx	OlPortType
	olPortCrntPMIdx	INTEGER
	olPortCrntPMIntervalTypeIdx	PMIntervalType
	olPortCrntPMOPRValue	FixedX10
	olPortCrntPMOPRTimeStamp	DateAndTime
	olPortCrntPMOPRValidity	PMValidity
	olPortCrntPMOPRMinValue	FixedX10
	olPortCrntPMOPRMinTimeStamp	DateAndTime
	olPortCrntPMOPRMinValidity	PMValidity
	olPortCrntPMOPRMaxValue	FixedX10
	olPortCrntPMOPRMaxTimeStamp	DateAndTime
	olPortCrntPMOPRMaxValidity	PMValidity
	olPortCrntPMOPRAvgValue	FixedX10
	olPortCrntPMOPRAvgTimeStamp	DateAndTime
	olPortCrntPMOPRAvgValidity	PMValidity
	olPortCrntPMOPRStdDevValue	FixedX10
	olPortCrntPMOPRStdDevTimeStamp	DateAndTime
	olPortCrntPMOPRStdDevValidity	PMValidity
	olPortCrntPMOPTValue	FixedX10
	olPortCrntPMOPTTimeStamp	DateAndTime
	olPortCrntPMOPTValidity	PMValidity
	olPortCrntPMOPTMinValue	FixedX10
	olPortCrntPMOPTMinTimeStamp	DateAndTime
	olPortCrntPMOPTMinValidity	PMValidity
	olPortCrntPMOPTMaxValue	FixedX10
	olPortCrntPMOPTMaxTimeStamp	DateAndTime
	olPortCrntPMOPTMaxValidity	PMValidity
	olPortCrntPMOPTAvgValue	FixedX10
	olPortCrntPMOPTAvgTimeStamp	DateAndTime
	olPortCrntPMOPTAvgValidity	PMValidity
	olPortCrntPMOPTStdDevValue	FixedX10
	olPortCrntPMOPTStdDevTimeStamp	DateAndTime
	olPortCrntPMOPTStdDevValidity	PMValidity
	olPortCrntPMLossRxValue	FixedX10
	olPortCrntPMLossRxTimeStamp	DateAndTime
	olPortCrntPMLossRxValidity	PMValidity
	olPortCrntPMLossTxValue	FixedX10
	olPortCrntPMLossTxTimeStamp	DateAndTime
	olPortCrntPMLossTxValidity	PMValidity
	olPortCrntPMInitializeAll	InitializeCmd

OlPortHistPMEntry
SEQUENCE
	olPortHistPMCpTypeIdx	CpType
	olPortHistPMShelfIdx	INTEGER
	olPortHistPMSlotIdx	INTEGER
	olPortHistPMTypeIdx	OlPortType
	olPortHistPMIdx	INTEGER
	olPortHistPMIntervalTypeIdx	PMIntervalType
	olPortHistPMIntervalIdx	INTEGER
	olPortHistPMOPRValue	FixedX10
	olPortHistPMOPRTimeStamp	DateAndTime
	olPortHistPMOPRValidity	PMValidity
	olPortHistPMOPRMinValue	FixedX10
	olPortHistPMOPRMinTimeStamp	DateAndTime
	olPortHistPMOPRMinValidity	PMValidity
	olPortHistPMOPRMaxValue	FixedX10
	olPortHistPMOPRMaxTimeStamp	DateAndTime
	olPortHistPMOPRMaxValidity	PMValidity
	olPortHistPMOPRAvgValue	FixedX10
	olPortHistPMOPRAvgTimeStamp	DateAndTime
	olPortHistPMOPRAvgValidity	PMValidity
	olPortHistPMOPRStdDevValue	FixedX10
	olPortHistPMOPRStdDevTimeStamp	DateAndTime
	olPortHistPMOPRStdDevValidity	PMValidity
	olPortHistPMOPTValue	FixedX10
	olPortHistPMOPTTimeStamp	DateAndTime
	olPortHistPMOPTValidity	PMValidity
	olPortHistPMOPTMinValue	FixedX10
	olPortHistPMOPTMinTimeStamp	DateAndTime
	olPortHistPMOPTMinValidity	PMValidity
	olPortHistPMOPTMaxValue	FixedX10
	olPortHistPMOPTMaxTimeStamp	DateAndTime
	olPortHistPMOPTMaxValidity	PMValidity
	olPortHistPMOPTAvgValue	FixedX10
	olPortHistPMOPTAvgTimeStamp	DateAndTime
	olPortHistPMOPTAvgValidity	PMValidity
	olPortHistPMOPTStdDevValue	FixedX10
	olPortHistPMOPTStdDevTimeStamp	DateAndTime
	olPortHistPMOPTStdDevValidity	PMValidity
	olPortHistPMLossRxValue	FixedX10
	olPortHistPMLossRxTimeStamp	DateAndTime
	olPortHistPMLossRxValidity	PMValidity
	olPortHistPMLossTxValue	FixedX10
	olPortHistPMLossTxTimeStamp	DateAndTime
	olPortHistPMLossTxValidity	PMValidity
	olPortHistPMInitializeAll	InitializeCmd

WchCrntPMEntry
SEQUENCE
	wchCrntPMCpTypeIdx	CpType
	wchCrntPMShelfIdx	INTEGER
	wchCrntPMSlotIdx	INTEGER
	wchCrntPMPortTypeIdx	OlPortType
	wchCrntPMPortIdx	INTEGER
	wchCrntPMIdx	INTEGER
	wchCrntPMIntervalTypeIdx	PMIntervalType
	wchCrntPMOPRValue	FixedX10
	wchCrntPMOPRTimeStamp	DateAndTime
	wchCrntPMOPRValidity	PMValidity
	wchCrntPMOPRMinValue	FixedX10
	wchCrntPMOPRMinTimeStamp	DateAndTime
	wchCrntPMOPRMinValidity	PMValidity
	wchCrntPMOPRMinInitialize	InitializeCmd
	wchCrntPMOPRMaxValue	FixedX10
	wchCrntPMOPRMaxTimeStamp	DateAndTime
	wchCrntPMOPRMaxValidity	PMValidity
	wchCrntPMOPRMaxInitialize	InitializeCmd
	wchCrntPMOPTValue	FixedX10
	wchCrntPMOPTTimeStamp	DateAndTime
	wchCrntPMOPTValidity	PMValidity
	wchCrntPMOPTMinValue	FixedX10
	wchCrntPMOPTMinTimeStamp	DateAndTime
	wchCrntPMOPTMinValidity	PMValidity
	wchCrntPMOPTMinInitialize	InitializeCmd
	wchCrntPMOPTMaxValue	FixedX10
	wchCrntPMOPTMaxTimeStamp	DateAndTime
	wchCrntPMOPTMaxValidity	PMValidity
	wchCrntPMOPTMaxInitialize	InitializeCmd

WchHistPMEntry
SEQUENCE
	wchHistPMCpTypeIdx	CpType
	wchHistPMShelfIdx	INTEGER
	wchHistPMSlotIdx	INTEGER
	wchHistPMPortTypeIdx	OlPortType
	wchHistPMPortIdx	INTEGER
	wchHistPMIdx	INTEGER
	wchHistPMIntervalTypeIdx	PMIntervalType
	wchHistPMIntervalIdx	INTEGER
	wchHistPMOPRValue	FixedX10
	wchHistPMOPRTimeStamp	DateAndTime
	wchHistPMOPRValidity	PMValidity
	wchHistPMOPRMinValue	FixedX10
	wchHistPMOPRMinTimeStamp	DateAndTime
	wchHistPMOPRMinValidity	PMValidity
	wchHistPMOPRMinInitialize	InitializeCmd
	wchHistPMOPRMaxValue	FixedX10
	wchHistPMOPRMaxTimeStamp	DateAndTime
	wchHistPMOPRMaxValidity	PMValidity
	wchHistPMOPRMaxInitialize	InitializeCmd
	wchHistPMOPTValue	FixedX10
	wchHistPMOPTTimeStamp	DateAndTime
	wchHistPMOPTValidity	PMValidity
	wchHistPMOPTMinValue	FixedX10
	wchHistPMOPTMinTimeStamp	DateAndTime
	wchHistPMOPTMinValidity	PMValidity
	wchHistPMOPTMinInitialize	InitializeCmd
	wchHistPMOPTMaxValue	FixedX10
	wchHistPMOPTMaxTimeStamp	DateAndTime
	wchHistPMOPTMaxValidity	PMValidity
	wchHistPMOPTMaxInitialize	InitializeCmd

Defined Values

olMib		1.3.6.1.4.1.18070.1.6
The external MIB definitions for the managenent of the BTI Dynamic Optical Layer components including DLA-series amplifiers and ROB-series ROADM modules.
MODULE-IDENTITY

olGroupTable		1.3.6.1.4.1.18070.2.2.1.16.1
This table lists all provisioned optical layer module groupings on the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlGroupEntry

olGroupEntry		1.3.6.1.4.1.18070.2.2.1.16.1.1
The conceptual row object of the optical layer group table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlGroupEntry

olGroupIdx		1.3.6.1.4.1.18070.2.2.1.16.1.1.1
A number which uniquely identifies the optical layer group within the node.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

olGroupType		1.3.6.1.4.1.18070.2.2.1.16.1.1.2
The optical layer group configuration type. This is a mandatory object that must be specified when a row of the table is created. The value of none is not applicable for this object.
Status: current	Access: read-create
OBJECT-TYPE
	OlGroupType

olGroupId		1.3.6.1.4.1.18070.2.2.1.16.1.1.3
Textual data recorded by the user to briefly identify the provisioned optical layer group in a manner useful to the user.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

olGroupCustom1		1.3.6.1.4.1.18070.2.2.1.16.1.1.4
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olGroupCustom2		1.3.6.1.4.1.18070.2.2.1.16.1.1.5
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olGroupCustom3		1.3.6.1.4.1.18070.2.2.1.16.1.1.6
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olGroupRowStatus		1.3.6.1.4.1.18070.2.2.1.16.1.1.100
Used to control the addition and deletion of entries in the optical layer group table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

olEqptTable		1.3.6.1.4.1.18070.2.2.1.16.3
This table lists all provisioned equipment modules that are assigned to an optical layer grouping.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlEqptEntry

olEqptEntry		1.3.6.1.4.1.18070.2.2.1.16.3.1
The conceptual row object of the optical layer equipment table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlEqptEntry

olEqptCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.3.1.1
The type of circuit pack of the equipment module that is assigned to the optical layer group.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olEqptShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.3.1.2
The number of the shelf of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in a shelf (40-channel Mux/Demux), the value of this object is 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

olEqptSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.3.1.3
The number of the slot of the equipment module that is assigned to the optical layer group. For equipment modules that do not reside in an active shelf slot (ex. 40-channel Mux/Demux), this object represents the module index among modules attributed to shelf 0.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

olEqptGroupNum		1.3.6.1.4.1.18070.2.2.1.16.3.1.4
The optical layer group to which the equipment modules is assigned.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..255

olEqptDegreeNum		1.3.6.1.4.1.18070.2.2.1.16.3.1.5
The optical layer group degree to which the equipment module is assigned.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	1..4

olEqptRowStatus		1.3.6.1.4.1.18070.2.2.1.16.3.1.100
Used to control the addition and deletion of entries in the optical layer equipment table, which in turn, controls the assigning and unassigning of equipment modules to/from an optical layer grouping.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

olPortTable		1.3.6.1.4.1.18070.2.2.1.16.4
This table lists all managed ports on equipment modules assigned to optical layer groupings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlPortEntry

olPortEntry		1.3.6.1.4.1.18070.2.2.1.16.4.1
The conceptual row object of the optical layer port table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortEntry

olPortCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.4.1.1
The type of circuit pack on which the optical layer port is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olPortShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.4.1.2
The number of the shelf on which the optical layer port is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

olPortSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.4.1.3
The number of the slot on which the optical layer port is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

olPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.4.1.4
The type of optical layer port according to the function it provides.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

olPortIdx		1.3.6.1.4.1.18070.2.2.1.16.4.1.5
The number of the optical layer port of the specified port type.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..600

olPortId		1.3.6.1.4.1.18070.2.2.1.16.4.1.6
Textual data recorded by the user to briefly identify the provisioned optical layer port in a manner useful to the user.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

olPortCustom1		1.3.6.1.4.1.18070.2.2.1.16.4.1.7
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olPortCustom2		1.3.6.1.4.1.18070.2.2.1.16.4.1.8
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olPortCustom3		1.3.6.1.4.1.18070.2.2.1.16.4.1.9
A variable length text string for operating company use.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olPortDWDMType		1.3.6.1.4.1.18070.2.2.1.16.4.1.10
Used to configure the port for the type of DWDM composite to which it is inter-connection. By default, all ports are inter-connected with native optical layer DWDM composites. For some configurations, client port 2 of ROB2 pack and ROB4 modules may be configured for alien DWDM type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	native(1), alien(2)

olPortGrid		1.3.6.1.4.1.18070.2.2.1.16.4.1.11
The DWDM grid spacing on the port.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ghz100(1), ghz50(2)

olPortWavelength		1.3.6.1.4.1.18070.2.2.1.16.4.1.12
The wavelength of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX100

olPortFrequency		1.3.6.1.4.1.18070.2.2.1.16.4.1.13
The frequency of the channel carried by the port. This object exists only in table entries for channel ports on Mux/Demux modules.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX100

olPortOperStatus		1.3.6.1.4.1.18070.2.2.1.16.4.1.14
The reported operational status of the optical layer port.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatus

olPortOperStatQlfr		1.3.6.1.4.1.18070.2.2.1.16.4.1.15
This is a textual list of qualifiers about the reported operational status of the optical layer port.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatQlfr

olPortRemoteId		1.3.6.1.4.1.18070.2.2.1.16.4.1.16
Identifies the remote node and port to which the optical layer port is connected, in the format prescribed by the PSM network management system.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString

olPortExpCnxDegree		1.3.6.1.4.1.18070.2.2.1.16.4.1.17
The expected degree number of the equipment that is inter-connected on the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	2..4

olPortActCnxDegree		1.3.6.1.4.1.18070.2.2.1.16.4.1.18
The actual degree number of the equipment that is inter-connected on the port.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	INTEGER	2..4

olPortRowStatus		1.3.6.1.4.1.18070.2.2.1.16.4.1.100
Used to control the addition and deletion of entries in the Optical Layer Port table. Manual creation and deletion is supported only for the client 2 port on ROB packs assigned to a Channel-equalizing Terminal or Reconfigurable Add/Drop node group.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

eqptConnTable		1.3.6.1.4.1.18070.2.2.1.16.5
This table lists all intra-group optical fiber patch connections between ports on equipment modules assigned to optical layer groupings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		EqptConnEntry

eqptConnEntry		1.3.6.1.4.1.18070.2.2.1.16.5.1
The conceptual row object of the equipment connection table.
Status: current	Access: not-accessible
OBJECT-TYPE
	EqptConnEntry

eqptConnSrcCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.1
The type of circuit pack on which the source port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

eqptConnSrcShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.2
The number of the shelf on which the source port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

eqptConnSrcSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.3
The number of the slot on which the source port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

eqptConnSrcPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.4
The type of the source port of the equipment connection, according to the function it provides.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

eqptConnSrcIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.5
The number of the port of the specified port type of the source port of the equipment connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..600

eqptConnDstCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.6
The type of circuit pack on which the destination port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

eqptConnDstShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.7
The number of the shelf on which the destination port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

eqptConnDstSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.8
The number of the slot on which the destination port of the equipment connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

eqptConnDstPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.9
The type of the destination port of the equipment connection, according to the function it provides.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

eqptConnDstIdx		1.3.6.1.4.1.18070.2.2.1.16.5.1.10
The number of the port of the specified port type of the destination port of the equipment connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..600

eqptConnType		1.3.6.1.4.1.18070.2.2.1.16.5.1.11
The type of optical fiber patch cable for the equipment connection entry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	duplex(1), loopback(2)

eqptConnRowStatus		1.3.6.1.4.1.18070.2.2.1.16.5.1.100
The equipment connection table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted as equipment modules are assigned and unassigned to optical layer groupings. This equipment connection row status object is used only in database change notifications to indicate if the row has been created or deleted.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	RowStatus

olOSCTable		1.3.6.1.4.1.18070.2.2.1.16.6
This table lists all OSC managed objects that have been created on the optical layer equipment modules.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlOSCEntry

olOSCEntry		1.3.6.1.4.1.18070.2.2.1.16.6.1
The conceptual row object of the optical laye OSC table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlOSCEntry

olOSCCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.6.1.1
The type of circuit pack on which the OSC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olOSCShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.6.1.2
The number of the shelf in which the OSC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olOSCSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.6.1.3
The number of the slot in which the OSC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olOSCLineIdx		1.3.6.1.4.1.18070.2.2.1.16.6.1.4
The line number of the OSC.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

olOSCAdminStatus		1.3.6.1.4.1.18070.2.2.1.16.6.1.5
The administrative status of the OSC. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	AdminStatus

olOSCOperStatus		1.3.6.1.4.1.18070.2.2.1.16.6.1.6
The reported operational status of the OSC.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatus

olOSCOperStatQlfr		1.3.6.1.4.1.18070.2.2.1.16.6.1.7
This is a textual list of qualifiers about the reported operational status of the OSC.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatQlfr

olOSCAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.6.1.8
Specifies the auto-enable timer for the targeted OSC. This value only applies if the olOSCAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
Status: current	Access: read-write
OBJECT-TYPE
	HoursAndMinutes

olOSCActAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.6.1.9
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
Status: current	Access: read-only
OBJECT-TYPE
	HoursAndMinutes

olOSCId		1.3.6.1.4.1.18070.2.2.1.16.6.1.10
Textual data recorded by the user to briefly identify the OSC object in a manner useful to the user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

olOSCCustom1		1.3.6.1.4.1.18070.2.2.1.16.6.1.11
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

olOSCCustom2		1.3.6.1.4.1.18070.2.2.1.16.6.1.12
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

olOSCCustom3		1.3.6.1.4.1.18070.2.2.1.16.6.1.13
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

olOSCFEIMMon		1.3.6.1.4.1.18070.2.2.1.16.6.1.14
This object is used to control the monitoring of the Far End Node Mismatch Identifier condition. When enabled, the received far-end node identification attributes will be monitored and compared to the expected far-end node identification attribites, and a condition is raised if attributes do no match.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

olOSCExpFESysName		1.3.6.1.4.1.18070.2.2.1.16.6.1.15
The expected far-end node system identifier.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..20)

olOSCExpFEIPAddr		1.3.6.1.4.1.18070.2.2.1.16.6.1.16
The expected far-end node IP address.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

olOSCExpFEGrp		1.3.6.1.4.1.18070.2.2.1.16.6.1.17
The expected far-end node optical layer group number.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..255

olOSCExpFEDegr		1.3.6.1.4.1.18070.2.2.1.16.6.1.18
The expected far-end node optical layer degree number.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	0..4

olOSCFESysName		1.3.6.1.4.1.18070.2.2.1.16.6.1.19
The actual far-end node system identifier.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..20)

olOSCFEIPAddr		1.3.6.1.4.1.18070.2.2.1.16.6.1.20
The actual far-end node IP address.
Status: current	Access: read-only
OBJECT-TYPE
	IpAddress

olOSCFEGrp		1.3.6.1.4.1.18070.2.2.1.16.6.1.21
The actual far-end node optical layer group number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

olOSCFEDegr		1.3.6.1.4.1.18070.2.2.1.16.6.1.22
The actual far-end node optical layer degree number.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..4

olOSCFEGrpType		1.3.6.1.4.1.18070.2.2.1.16.6.1.23
The actual far-end node optical layer group configuration type.
Status: current	Access: read-only
OBJECT-TYPE
	OlGroupType

olOSCRowStatus		1.3.6.1.4.1.18070.2.2.1.16.6.1.100
The Optical Layer OSC table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB equipment is provisioned. This optical layer OSC row status object is used only in database change notifications to indicate if the row has been created or deleted.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	RowStatus

odccTable		1.3.6.1.4.1.18070.2.2.1.16.7
This table lists all provisioned ODCC objects on equipment modules assigned to optical layer groupings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OdccEntry

odccEntry		1.3.6.1.4.1.18070.2.2.1.16.7.1
The conceptual row object of the ODCC table.
Status: current	Access: not-accessible
OBJECT-TYPE
	OdccEntry

odccCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.7.1.1
The type of circuit pack on which the ODCC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

odccShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.7.1.2
The number of the shelf in which the ODCC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

odccSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.7.1.3
The number of the slot in which the ODC is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

odccLineIdx		1.3.6.1.4.1.18070.2.2.1.16.7.1.4
The line number of the ODCC.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

odccAdminStatus		1.3.6.1.4.1.18070.2.2.1.16.7.1.5
The administrative status of the ODCC. The default value is disabled if the supporting ODC is disabled, otherwise it is enabled.
Status: current	Access: read-create
OBJECT-TYPE
	AdminStatus

odccRowStatus		1.3.6.1.4.1.18070.2.2.1.16.7.1.100
Used to control the addition and deletion of entries in the ODCC table, which in turn controls the provisioning and de-provisioning of ODCC objects.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

wdmTable		1.3.6.1.4.1.18070.2.2.1.16.8
This table lists all WDM managed objects that have been created on optical layer equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WdmEntry

wdmEntry		1.3.6.1.4.1.18070.2.2.1.16.8.1
The conceptual row object of the WDM table.
Status: current	Access: not-accessible
OBJECT-TYPE
	WdmEntry

wdmCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.8.1.1
The type of circuit pack on which the WDM is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wdmShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.8.1.2
The number of the shelf in which the WDM is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

wdmSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.8.1.3
The number of the slot in which the WDM is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

wdmLineIdx		1.3.6.1.4.1.18070.2.2.1.16.8.1.4
The line number of the WDM.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

wdmAdminStatus		1.3.6.1.4.1.18070.2.2.1.16.8.1.5
The administrative status of the WDM. The default value is autoEnabled if the supporting equipment is enabled or autoEnabled, otherwise it is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	AdminStatus

wdmOperStatus		1.3.6.1.4.1.18070.2.2.1.16.8.1.6
The reported operational status of the WDM.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatus

wdmOperStatQlfr		1.3.6.1.4.1.18070.2.2.1.16.8.1.7
This is a textual list of qualifiers about the reported operational status of the WDM.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatQlfr

wdmAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.8.1.8
Specifies the auto-enable timer for the targeted WDM. This value only applies if the wdmAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
Status: current	Access: read-write
OBJECT-TYPE
	HoursAndMinutes

wdmActAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.8.1.9
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
Status: current	Access: read-only
OBJECT-TYPE
	HoursAndMinutes

wdmId		1.3.6.1.4.1.18070.2.2.1.16.8.1.10
Textual data recorded by the user to briefly identify the WDM object in a manner useful to the user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wdmCustom1		1.3.6.1.4.1.18070.2.2.1.16.8.1.11
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wdmCustom2		1.3.6.1.4.1.18070.2.2.1.16.8.1.12
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wdmCustom3		1.3.6.1.4.1.18070.2.2.1.16.8.1.13
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wdmFiberType		1.3.6.1.4.1.18070.2.2.1.16.8.1.14
The fiber type of the span fiber.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	smf(1)

wdmSpanLength		1.3.6.1.4.1.18070.2.2.1.16.8.1.15
The measured length of the receive span fiber.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wdmSpanLossRxHighTh		1.3.6.1.4.1.18070.2.2.1.16.8.1.16
The high threshold setting for the loss on the receive fiber of the Line span. The setting for this object is used to evaluate the olPortLossRxHighThCond trap. When the value of this object is set to 0, the olPortLossRxHighThCond trap is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wdmSpanLossSpecMax		1.3.6.1.4.1.18070.2.2.1.16.8.1.17
The specified maximum supported loss on the Line span. The value of this object is dependent on the optical layer group configurations of the local and far-end nodes.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

wdmNumChannels		1.3.6.1.4.1.18070.2.2.1.16.8.1.18
The actual number of channels that the WDM is currently provisioned to carry.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	0..44

wdmRowStatus		1.3.6.1.4.1.18070.2.2.1.16.8.1.100
The WDM table RowStatus object is not readable or writeable because all entries in the table are automatically created and deleted when the supporting DLA or ROB circuit pack is assigned and unassigned to an optical layer grouping. This WDM row status object is used only in database change notifications to indicate if the row has been created or deleted.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	RowStatus

wchXCTable		1.3.6.1.4.1.18070.2.2.1.16.9
This table lists all configured wavelength channel cross-connections configured on optical layer equipment.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WchXCEntry

wchXCEntry		1.3.6.1.4.1.18070.2.2.1.16.9.1
The conceptual row object of the wavelength channel cross-connection table.
Status: current	Access: not-accessible
OBJECT-TYPE
	WchXCEntry

wchXCSrcCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.1
The type of circuit pack on which the source wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wchXCSrcShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.2
The number of the shelf on which the source wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

wchXCSrcSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.3
The number of the slot on which the source wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

wchXCSrcPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.4
The type of port on which the source wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

wchXCSrcPortIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.5
The number of the port on which the source wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..600

wchXCSrcChannelIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.6
The channel number of the source wavelength channel of the cross-connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	135..610

wchXCDstCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.7
The type of circuit pack on which the destination wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wchXCDstShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.8
The number of the shelf on which the destination wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0 | 1 | 11 | 21 | 31

wchXCDstSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.9
The number of the slot on which the destination wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..255

wchXCDstPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.10
The type of port on which the destination wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

wchXCDstPortIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.11
The number of the port on which the destination wavelength channel of the cross-connection is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..600

wchXCDstChannelIdx		1.3.6.1.4.1.18070.2.2.1.16.9.1.12
The channel number of the destination wavelength channel of the cross-connection.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	135..610

wchXCServiceName		1.3.6.1.4.1.18070.2.2.1.16.9.1.13
Name of end-to-end wavelength service of which this cross- connection is a part.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

wchXCRowStatus		1.3.6.1.4.1.18070.2.2.1.16.9.1.100
Used to control the addition and deletion of entries in the wavelength channel cross-connection table.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

wchTable		1.3.6.1.4.1.18070.2.2.1.16.10
This table lists all managed wavelength channels on equipment modules assigned to optical layer groupings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WchEntry

wchEntry		1.3.6.1.4.1.18070.2.2.1.16.10.1
The conceptual row object of the wavelength channel table.
Status: current	Access: not-accessible
OBJECT-TYPE
	WchEntry

wchCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.1
The type of circuit pack on which the wavelength channel is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wchShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.2
The number of the shelf on which the wavelength channel is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

wchSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.3
The number of the slot on which the wavelength channel is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

wchPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.4
The type of port on which the wavelength channel is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

wchPortIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.5
The number of the port on which the wavelength channel is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

wchIdx		1.3.6.1.4.1.18070.2.2.1.16.10.1.6
The number of the targeted wavelength channel.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	135..610

wchAdminStatus		1.3.6.1.4.1.18070.2.2.1.16.10.1.7
The administrative status of the wavelength channel. The default value is autoEnabled if the supporting WDM is enabled or autoEnabled, otherwise it is disabled.
Status: current	Access: read-write
OBJECT-TYPE
	AdminStatus

wchOperStatus		1.3.6.1.4.1.18070.2.2.1.16.10.1.8
The reported operational status of the wavelength channel.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatus

wchOperStatQlfr		1.3.6.1.4.1.18070.2.2.1.16.10.1.9
This is a textual list of qualifiers about the reported operational status of the wavelength channel.
Status: current	Access: read-only
OBJECT-TYPE
	OperStatQlfr

wchAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.10.1.10
Specifies the auto-enable timer for the targeted wavelength channel. This value only applies if the wchAdminStatus object is set to autoEnabled, in which case the default value is 008-00, otherwise, it is 000-00.
Status: current	Access: read-write
OBJECT-TYPE
	HoursAndMinutes

wchActAutoEnableTimer		1.3.6.1.4.1.18070.2.2.1.16.10.1.11
Indicates the time remaining on the auto-enable timer if it is actively counting down. Otherwise, the value returned is 000-00.
Status: current	Access: read-only
OBJECT-TYPE
	HoursAndMinutes

wchId		1.3.6.1.4.1.18070.2.2.1.16.10.1.12
Textual data recorded by the user to briefly identify the wavelength channel object in a manner useful to the user.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

wchCustom1		1.3.6.1.4.1.18070.2.2.1.16.10.1.13
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wchCustom2		1.3.6.1.4.1.18070.2.2.1.16.10.1.14
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wchCustom3		1.3.6.1.4.1.18070.2.2.1.16.10.1.15
A variable length text string for operating company use.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

wchBitrate		1.3.6.1.4.1.18070.2.2.1.16.10.1.16
The bitrate of the signal carried by the wavelength channel. A value of tenGig applies to all signal bitrates of 10Gb/sec or less.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	tenGig(1)

wchGrid		1.3.6.1.4.1.18070.2.2.1.16.10.1.17
The minimum grid spacing with which the channel is compatible.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ghz100(1), ghz50(2)

wchWavelength		1.3.6.1.4.1.18070.2.2.1.16.10.1.18
The wavelength of the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX100

wchFrequency		1.3.6.1.4.1.18070.2.2.1.16.10.1.19
The frequency of the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX100

wchRowStatus		1.3.6.1.4.1.18070.2.2.1.16.10.1.100
The Wavelength Channel table RowStatus object is not readable or writeable because all entries in the Wavelength Channel table are automatically created and deleted when an wavelength channel cross-connection involving the wavelength channel is created or deleted. This Wavelength Channel row status object is used only in database change notifications to indicate if the row has been created or deleted.
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	RowStatus

olGroupMerge		1.3.6.1.4.1.18070.2.2.1.16.11
OBJECT IDENTIFIER

olGroupMergeCmd		1.3.6.1.4.1.18070.2.2.1.16.11.1
This object is used to invoke an optical layer group merge operation. The optical layer group merge is activated when this object is set to invoke(2). The values of the olGroupMergePrimary and olGroupMergeSecondary objects must be set in the same set request as this object. When a get is performed on this object, the value returned is idle(1).
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	idle(1), invoke(2)

olGroupMergePrimary		1.3.6.1.4.1.18070.2.2.1.16.11.2
The identifier of the primary optical layer group of the merge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

olGroupMergeSecondary		1.3.6.1.4.1.18070.2.2.1.16.11.3
The identifier of the secondary optical layer group of the merge.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	1..255

olPerformance		1.3.6.1.4.1.18070.2.2.1.16.12
OBJECT IDENTIFIER

olOSCCrntPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.1
A table of current performance monitoring statistics collected for the optical layer OSC objects on the NE.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlOSCCrntPMEntry

olOSCCrntPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.1.1
The row entry object of the optical layer OSC current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer OSC object.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlOSCCrntPMEntry

olOSCCrntPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.1
The type of circuit pack on which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olOSCCrntPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.2
The number of the shelf in which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olOSCCrntPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.3
The number of the slot in which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olOSCCrntPMLineIdx		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.4
The line number of the OSC targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

olOSCCrntPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.5
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

olOSCCrntPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.6
The OSC optical power received on the Line port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCCrntPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.7
The date and time stamp of the optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.8
Indicates the validity of the provided optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.9
The OSC optical power transmitted at the output of the Line port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCCrntPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.10
The date and time stamp of the optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.11
Indicates the validity of the provided optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMOBRValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.12
The OSC optical back-reflected power.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCCrntPMOBRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.13
The date and time stamp of the optical back-reflected power value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMOBRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.14
Indicates the validity of the provided optical back-reflected power value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMCVSValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.15
The count of coding violations at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCCrntPMCVSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.16
The date and time stamp of the section layer coding violations value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMCVSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.17
Indicates the validity of the provided section layer coding violations value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMCVSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.18
Used to initialize the value of the olOSCCrntPMCVSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCCrntPMESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.19
The count of errored seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCCrntPMESSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.20
The date and time stamp of the section layer errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMESSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.21
Indicates the validity of the provided section layer errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMESSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.22
Used to initialize the value of the olOSCCrntPMESSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCCrntPMSESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.23
The count of severely errored seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCCrntPMSESSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.24
The date and time stamp of the section layer severely errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMSESSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.25
Indicates the validity of the provided section layer severely errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMSESSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.26
Used to initialize the value of the olOSCCrntPMSESSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCCrntPMSEFSSValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.27
The count of severely errored framing seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCCrntPMSEFSSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.28
The date and time stamp of the section layer severely errored framing seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMSEFSSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.29
Indicates the validity of the provided section layer severely errored framing seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMSEFSSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.30
Used to initialize the value of the olOSCCrntPMSEFSSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCCrntPMUASSValue		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.31
The count of unavailable seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCCrntPMUASSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.32
The date and time stamp of the section layer unavailable seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCCrntPMUASSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.33
Indicates the validity of the provided section layer unavailable seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCCrntPMUASSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.1.1.34
Used to initialize the value of the olOSCCrntPMUASSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCHistPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.2
A table of historical performance monitoring statistics collected for the optical layer OSC objects on the NE.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlOSCHistPMEntry

olOSCHistPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.2.1
The row entry object of the optical layer OSC historical performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a historical measurement interval for a given optical layer OSC object.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlOSCHistPMEntry

olOSCHistPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.1
The type of circuit pack on which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olOSCHistPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.2
The number of the shelf in which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olOSCHistPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.3
The number of the slot in which the optical layer OSC targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olOSCHistPMLineIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.4
The line number of the OSC targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

olOSCHistPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.5
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

olOSCHistPMIntervalIdx		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.6
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..96

olOSCHistPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.7
The OSC optical power received on the Line port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCHistPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.8
The date and time stamp of the optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.9
Indicates the validity of the provided optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.10
The OSC optical power transmitted at the output of the Line port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCHistPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.11
The date and time stamp of the optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.12
Indicates the validity of the provided optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMOBRValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.13
The OSC optical back-reflected power.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olOSCHistPMOBRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.14
The date and time stamp of the optical back-reflected power value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMOBRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.15
Indicates the validity of the provided optical back-reflected power value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMCVSValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.16
The count of coding violations at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCHistPMCVSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.17
The date and time stamp of the section layer coding violations value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMCVSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.18
Indicates the validity of the provided section layer coding violations value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMCVSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.19
Used to initialize the value of the olOSCHistPMCVSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCHistPMESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.20
The count of errored seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCHistPMESSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.21
The date and time stamp of the section layer errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMESSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.22
Indicates the validity of the provided section layer errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMESSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.23
Used to initialize the value of the olOSCHistPMESSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCHistPMSESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.24
The count of severely errored seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCHistPMSESSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.25
The date and time stamp of the section layer severely errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMSESSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.26
Indicates the validity of the provided section layer severely errored seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMSESSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.27
Used to initialize the value of the olOSCHistPMSESSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCHistPMSEFSSValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.28
The count of severely errored framing seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCHistPMSEFSSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.29
The date and time stamp of the section layer severely errored framing seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMSEFSSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.30
Indicates the validity of the provided section layer severely errored framing seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMSEFSSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.31
Used to initialize the value of the olOSCHistPMSEFSSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCHistPMUASSValue		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.32
The count of unavailable seconds at the section layer of the received OSC signal.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCHistPMUASSTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.33
The date and time stamp of the section layer unavailable seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olOSCHistPMUASSValidity		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.34
Indicates the validity of the provided section layer unavailable seconds value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olOSCHistPMUASSInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.2.1.35
Used to initialize the value of the olOSCHistPMUASSValue object to 0.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCPMThresholdTable		1.3.6.1.4.1.18070.2.2.1.16.12.3
A table of threshold levels for performance monitoring counter values on Optical Layer OSC objects, that are used in the generation of threshold crossing alerts.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlOSCPMThresholdEntry

olOSCPMThresholdEntry		1.3.6.1.4.1.18070.2.2.1.16.12.3.1
The row entry object of the optical layer OSC performance monitoring threshold table. Each row of this table contains a set of PM thresholds for a given interval type that applies to an individual optical layer OSC object.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlOSCPMThresholdEntry

olOSCPMThresholdCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.1
The type of circuit pack on which the optical layer OSC targeted for PM thresholds is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olOSCPMThresholdShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.2
The number of the shelf in which the optical layer OSC targeted for PM thresholds is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olOSCPMThresholdSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.3
The number of the slot in which the optical layer OSC targeted for PM thresholds is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olOSCPMThresholdLineIdx		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.4
The line number of the OSC targeted for PM thresholds.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1

olOSCPMThresholdIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.5
The type of PM bin according to interval length. Thresholds are supported for the 15-minute and 1-day PM bins only.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

olOSCPMThresholdCVSValue		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.6
The threshold for the count of coding violations at the section layer.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCPMThresholdESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.7
The threshold for the count of errored seconds at the section layer.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCPMThresholdSESSValue		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.8
The threshold for the count of severely errored seconds at the section layer.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCPMThresholdSEFSSValue		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.9
The threshold for the count of severely errored framing seconds at the section layer.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olOSCPMThresholdUASSValue		1.3.6.1.4.1.18070.2.2.1.16.12.3.1.10
The threshold for the count of unavailable seconds at the section layer.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

olPortCrntPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.4
A table of current performance monitoring statistics collected for ports on equipment modules assigned to optical layer groupings.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlPortCrntPMEntry

olPortCrntPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.4.1
The row entry object of the optical layer port current performance monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a given optical layer port.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortCrntPMEntry

olPortCrntPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.1
The type of circuit pack on which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olPortCrntPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.2
The number of the shelf in which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olPortCrntPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.3
The number of the slot in which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olPortCrntPMTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.4
The type of port targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

olPortCrntPMIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.5
The number of the port of the specified port type targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

olPortCrntPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.6
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

olPortCrntPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.7
The instantaneous optical power received on the port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.8
The date and time stamp of the instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.9
Indicates the validity of the provided instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPRMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.10
The minimum optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPRMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.11
The date and time stamp of the minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPRMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.12
Indicates the validity of the provided minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPRMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.13
The maximum optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPRMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.14
The date and time stamp of the maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPRMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.15
Indicates the validity of the provided maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPRAvgValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.16
The average optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPRAvgTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.17
The date and time stamp of the average optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPRAvgValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.18
Indicates the validity of the provided average optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPRStdDevValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.19
The standard deviation from the average of the optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPRStdDevTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.20
The date and time stamp of the standard deviation value for the optical power received.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPRStdDevValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.21
Indicates the validity of the provided standard deviation value for the optical power received.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.22
The instantaneous optical power transmitted on the port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.23
The date and time stamp of the instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.24
Indicates the validity of the provided instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPTMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.25
The minimum optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPTMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.26
The date and time stamp of the minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPTMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.27
Indicates the validity of the provided minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPTMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.28
The maximum optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPTMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.29
The date and time stamp of the maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPTMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.30
Indicates the validity of the provided maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPTAvgValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.31
The average optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPTAvgTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.32
The date and time stamp of the average optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPTAvgValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.33
Indicates the validity of the provided average optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMOPTStdDevValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.34
The standard deviation from the average of the optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMOPTStdDevTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.35
The date and time stamp of the standard deviation value for the optical power transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMOPTStdDevValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.36
Indicates the validity of the provided standard deviation value for the optical power transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMLossRxValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.37
The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMLossRxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.38
The date and time stamp of the receive loss value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMLossRxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.39
Indicates the validity of the provided receive loss value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMLossTxValue		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.40
The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortCrntPMLossTxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.41
The date and time stamp of the transmit loss value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortCrntPMLossTxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.42
Indicates the validity of the provided transmit loss value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortCrntPMInitializeAll		1.3.6.1.4.1.18070.2.2.1.16.12.4.1.43
Used to initialize all binned PM values for a given entry in the table.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olPortHistPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.5
A table of historical performance monitoring statistics collected for optical layer ports.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		OlPortHistPMEntry

olPortHistPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.5.1
The row entry object of the Optical Layer Port Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for an historical measurement interval for a given optical layer port.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortHistPMEntry

olPortHistPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.1
The type of circuit pack on which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

olPortHistPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.2
The number of the shelf in which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

olPortHistPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.3
The number of the slot in which the port targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

olPortHistPMTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.4
The type of port targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

olPortHistPMIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.5
The number of the port of the specified port type targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

olPortHistPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.6
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

olPortHistPMIntervalIdx		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.7
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..96

olPortHistPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.8
The instantaneous optical power received on the port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.9
The date and time stamp of the instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.10
Indicates the validity of the provided instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPRMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.11
The minimum optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPRMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.12
The date and time stamp of the minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPRMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.13
Indicates the validity of the provided minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPRMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.14
The maximum optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPRMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.15
The date and time stamp of the maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPRMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.16
Indicates the validity of the provided maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPRAvgValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.17
The average optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPRAvgTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.18
The date and time stamp of the average optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPRAvgValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.19
Indicates the validity of the provided average optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPRStdDevValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.20
The standard deviation from the average of the optical power received on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPRStdDevTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.21
The date and time stamp of the standard deviation value for the optical power received.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPRStdDevValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.22
Indicates the validity of the provided standard deviation value for the optical power received.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.23
The instantaneous optical power transmitted on the port.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.24
The date and time stamp of the instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.25
Indicates the validity of the provided instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPTMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.26
The minimum optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPTMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.27
The date and time stamp of the minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPTMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.28
Indicates the validity of the provided minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPTMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.29
The maximum optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPTMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.30
The date and time stamp of the maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPTMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.31
Indicates the validity of the provided maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPTAvgValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.32
The average optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPTAvgTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.33
The date and time stamp of the average optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPTAvgValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.34
Indicates the validity of the provided average optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMOPTStdDevValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.35
The standard deviation from the average of the optical power transmitted on the port over the interval.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMOPTStdDevTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.36
The date and time stamp of the standard deviation value for the optical power transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMOPTStdDevValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.37
Indicates the validity of the provided standard deviation value for the optical power transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMLossRxValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.38
The optical power loss measured on the port in the receive direction. For a Line port, this represents the span loss. For a DCM port, this is the DCM loss. For a client port, this is the loss of the receive inter-connection fiber.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMLossRxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.39
The date and time stamp of the receive loss value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMLossRxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.40
Indicates the validity of the provided receive loss value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMLossTxValue		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.41
The optical power loss measured on the port in the transmit direction. For a Line port, this represents the far-end span loss. For a client port, this is the loss of the transmit inter-connection fiber.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

olPortHistPMLossTxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.42
The date and time stamp of the transmit loss value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

olPortHistPMLossTxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.43
Indicates the validity of the provided transmit loss value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

olPortHistPMInitializeAll		1.3.6.1.4.1.18070.2.2.1.16.12.5.1.44
Used to initialize all binned PM values for a given entry in the table.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchCrntPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.6
A table of current performance monitoring statistics collected for wavelength channels.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WchCrntPMEntry

wchCrntPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.6.1
The row entry object of the Wavelength Channel Current Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a current measurement interval for a wavelength channel object in an optical layer grouping.
Status: current	Access: not-accessible
OBJECT-TYPE
	WchCrntPMEntry

wchCrntPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.1
The type of circuit pack on which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wchCrntPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.2
The number of the shelf in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

wchCrntPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.3
The number of the slot in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

wchCrntPMPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.4
The type of port in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

wchCrntPMPortIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.5
The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

wchCrntPMIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.6
The number of the wavelength channel targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	135..610

wchCrntPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.7
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

wchCrntPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.8
The instantaneous optical power received on the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

wchCrntPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.9
The date and time stamp of the instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.10
Indicates the validity of the provided instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchCrntPMOPRMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.11
The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchCrntPMOPRMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.12
The date and time stamp of the minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPRMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.13
Indicates the validity of the provided minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchCrntPMOPRMinInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.14
Used to initialize the value of the wchCrntPMOPRMinValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchCrntPMOPRMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.15
The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchCrntPMOPRMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.16
The date and time stamp of the maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPRMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.17
Indicates the validity of the provided maximum optical power received value.
Status: current	Access: read-write
OBJECT-TYPE
	PMValidity

wchCrntPMOPRMaxInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.18
Used to initialize the value of the wchCrntPMOPRMaxValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchCrntPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.19
The instantaneous optical power transmitted on the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

wchCrntPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.20
The date and time stamp of the instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.21
Indicates the validity of the provided instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchCrntPMOPTMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.22
The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchCrntPMOPTMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.23
The date and time stamp of the minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPTMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.24
Indicates the validity of the provided minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchCrntPMOPTMinInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.25
Used to initialize the value of the wchCrntPMOPTMinValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchCrntPMOPTMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.26
The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchCrntPMOPTMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.27
The date and time stamp of the maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchCrntPMOPTMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.28
Indicates the validity of the provided maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchCrntPMOPTMaxInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.6.1.29
Used to initialize the value of the wchCrntPMOPTMaxValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchHistPMTable		1.3.6.1.4.1.18070.2.2.1.16.12.7
A table of historical performance monitoring statistics collected for wavelength channels.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WchHistPMEntry

wchHistPMEntry		1.3.6.1.4.1.18070.2.2.1.16.12.7.1
The row entry object of the Wavelength Channel Historical Performance Monitoring table. Each row of this table contains a full set of PM statistics and related data for a wavelength channel object in an optical layer grouping.
Status: current	Access: not-accessible
OBJECT-TYPE
	WchHistPMEntry

wchHistPMCpTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.1
The type of circuit pack on which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	CpType

wchHistPMShelfIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.2
The number of the shelf in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1 | 11 | 21 | 31

wchHistPMSlotIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.3
The number of the slot in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..20

wchHistPMPortTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.4
The type of port in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	OlPortType

wchHistPMPortIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.5
The number of the port of the specified port type in which the wavelength channel targeted for PMs is located.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

wchHistPMIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.6
The number of the wavelength channel targeted for PMs.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	135..610

wchHistPMIntervalTypeIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.7
The type of PM bin according to interval length.
Status: current	Access: not-accessible
OBJECT-TYPE
	PMIntervalType

wchHistPMIntervalIdx		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.8
The specific PM bin number. The range is 1 to 96 for the 15-minute historical bins. For the 1-day historical bin, the value is 1.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..96

wchHistPMOPRValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.9
The instantaneous optical power received on the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

wchHistPMOPRTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.10
The date and time stamp of the instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPRValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.11
Indicates the validity of the provided instantaneous optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPRMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.12
The minimum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchHistPMOPRMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.13
The date and time stamp of the minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPRMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.14
Indicates the validity of the provided minimum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPRMinInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.15
Used to initialize the value of the wchHistPMOPRMinValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchHistPMOPRMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.16
The maximum optical power received on the channel over the interval. Can be set to the value 0 to initialize the object.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchHistPMOPRMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.17
The date and time stamp of the maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPRMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.18
Indicates the validity of the provided maximum optical power received value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPRMaxInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.19
Used to initialize the value of the wchHistPMOPRMaxValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchHistPMOPTValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.20
The instantaneous optical power transmitted on the channel.
Status: current	Access: read-only
OBJECT-TYPE
	FixedX10

wchHistPMOPTTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.21
The date and time stamp of the instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPTValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.22
Indicates the validity of the provided instantaneous optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPTMinValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.23
The minimum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchHistPMOPTMinTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.24
The date and time stamp of the minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPTMinValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.25
Indicates the validity of the provided minimum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPTMinInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.26
Used to initialize the value of the wchHistPMOPTMinValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

wchHistPMOPTMaxValue		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.27
The maximum optical power transmitted on the channel over the interval. Can be set to the value 0 to initialize the object.
Status: current	Access: read-write
OBJECT-TYPE
	FixedX10

wchHistPMOPTMaxTimeStamp		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.28
The date and time stamp of the maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

wchHistPMOPTMaxValidity		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.29
Indicates the validity of the provided maximum optical power transmitted value.
Status: current	Access: read-only
OBJECT-TYPE
	PMValidity

wchHistPMOPTMaxInitialize		1.3.6.1.4.1.18070.2.2.1.16.12.7.1.30
Used to initialize the value of the wchHistPMOPTMaxValue object.
Status: current	Access: read-write
OBJECT-TYPE
	InitializeCmd

olOSCEvtNotifications		1.3.6.1.4.1.18070.2.2.2.1.33.1
OBJECT IDENTIFIER

olPortEvtNotifications		1.3.6.1.4.1.18070.2.2.2.1.33.2
OBJECT IDENTIFIER

wdmEvtNotifications		1.3.6.1.4.1.18070.2.2.2.1.33.3
OBJECT IDENTIFIER

wchEvtNotifications		1.3.6.1.4.1.18070.2.2.2.1.33.4
OBJECT IDENTIFIER

olOSCCondNotifications		1.3.6.1.4.1.18070.2.2.2.2.28.1
OBJECT IDENTIFIER

olPortCondNotifications		1.3.6.1.4.1.18070.2.2.2.2.28.2
OBJECT IDENTIFIER

wdmCondNotifications		1.3.6.1.4.1.18070.2.2.2.2.28.3
OBJECT IDENTIFIER

wchCondNotifications		1.3.6.1.4.1.18070.2.2.2.2.28.4
OBJECT IDENTIFIER

olOSCStatusChangeEvt		1.3.6.1.4.1.18070.2.2.2.1.33.1.0.1
Notification of a change in the operational status or operational status qualifier or an optical layer OSC facility.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCTcaEvt		1.3.6.1.4.1.18070.2.2.2.1.33.1.0.2
This trap provides a threshold crossing alert for a performance monitoring statistic on an optical layer OSC facility.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortStatusChangeEvt		1.3.6.1.4.1.18070.2.2.2.1.33.2.0.1
Notification of a change in the operational status or operational status qualifier or an optical layer port.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmStatusChangeEvt		1.3.6.1.4.1.18070.2.2.2.1.33.3.0.1
Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchStatusChangeEvt		1.3.6.1.4.1.18070.2.2.2.1.33.4.0.1
Notification of a change in the operational status or operational status qualifier or an optical layer WDM object.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfLightRxCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.1
There is no input signal detected for the identified OSC.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfLightRxClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.2
A previously active optical layer OSC Receive Loss of Light condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfFrameCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.3
There input OSC signal cannot be framed.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfFrameClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.4
A previously active optical layer OSC Loss of Frame condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfLightTxCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.5
There is no transmitted signal power detected for the identified OSC.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCLossOfLightTxClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.6
A previously active optical layer OSC Transmit Loss of Light condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCFarEndIdMismatchCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.7
The identifying attributes received for the far-end node do not match the expected identifying attributes.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCFarEndIdMismatchClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.8
A previously active optical layer OSC Far End Identification Mismatch condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCFarEndNodeCnfgInconsistentCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.9
The optical layer group configuration type for the far-end node is inconsistent with the configuration type of the local optical layer group.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCFarEndNodeCnfgInconsistentClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.10
A previously active optical layer OSC Far End Node Configuration Inconsistent condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCSpanContCommCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.11
Bi-directional control communications with the node at the opposite end of the span section have failed.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCSpanContCommClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.12
A previously active optical layer OSC Section Control Communications condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCEqlzContCommCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.13
Bi-directional control communications with the node at the opposite end of the equalization section have failed.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCEqlzContCommClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.14
A previously active optical layer OSC Equalization Control Communications condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCOpticalBackReflOutOfSpecCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.15
The measured optical back reflection of the transmitted OSC signal exceeds the specified maximum.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCOpticalBackReflOutOfSpecClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.16
A previously active optical layer OSC Optical Back Reflection Out of Specification condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCOpticalBackReflHighThCond		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.17
The measured optical back reflection of the transmitted OSC signal exceeds the high threshold.
Status: current	Access: read-write
NOTIFICATION-TYPE

olOSCOpticalBackReflHighThClear		1.3.6.1.4.1.18070.2.2.2.2.28.1.0.18
A previously active optical layer OSC Optical Back Reflection High Threshold condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortPowerOutOfSpecRxCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.1
The power received on the optical port is outside the operating range.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortPowerOutOfSpecRxClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.2
A previously active optical layer port Received Power Out Of Specification condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossOfLightRxCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.3
There is no received optical power detected for the port.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossOfLightRxClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.4
A previously active optical layer port Receive Loss of Light condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossRxOutOfSpecCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.5
The optical power loss measured over the span or fiber connection terminating on the port in the receive direction is outside the specification range.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossRxOutOfSpecClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.6
A previously active optical layer port Receive Loss out of Specification condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossRxHighThCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.7
The optical power loss measured over the span terminating on the line port in the receive direction is above the high threshold level.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortLossRxHighThClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.8
A previously active optical layer port Receive Loss High Threshold condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortAPSDCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.9
An automatic power shutdown has been automatically operated on the optical layer port for safety reasons.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortAPSDClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.10
A previously active optical layer port Automatic Power Shutdown condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortPayloadMissingIndCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.11
A Payload Missing Indication has been received on the optical layer port input.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortPayloadMissingIndClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.12
A previously active optical layer port Payload Missing Indication condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortBackwardDefectIndCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.13
A Backward Defect Indication has been received on the optical layer port input.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortBackwardDefectIndClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.14
A previously active optical layer port Backward Defect Indication condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortChannelCountDeficiencyCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.15
A channel count deficiency condition has been raised against the port. This indicates that the number of channels received on the port is less than the number required to maintain stable optical control given the high span loss level detected on the receive span fiber.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortChannelCountDeficiencyClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.16
A previously active optical layer port Channel Count Deficiency condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortConnectionMismatchCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.17
The identified optical layer port is incorrectly connected and must be re-connected to a different remote end port.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortConnectionMismatchClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.18
A previously active optical layer port Connection Mismatch condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortConnectionValidationTimeoutCond		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.19
Connection validation could not be performed on the identified optical layer port, which may mean that the port is incorrectly connected.
Status: current	Access: read-write
NOTIFICATION-TYPE

olPortConnectionValidationTimeoutClear		1.3.6.1.4.1.18070.2.2.2.2.28.2.0.20
A previously active optical layer port Connection Validation Timeout condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidPreAmpOperCnfgCond		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.1
The WDM optical pre-amplifier is operating at a configuration which is invalid for the detected loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidPreAmpOperCnfgClear		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.2
A previously active WDM Invalid Pre-Amplifier Operating Configuration condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidMidAmpOperCnfgCond		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.3
The WDM optical mid-amplifier is operating at a configuration which is invalid for the detected loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidMidAmpOperCnfgClear		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.4
A previously active WDM Invalid Mid-Amplifier Operating Configuration condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidBoostAmpOperCnfgCond		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.5
The WDM optical booster-amplifier is operating at a configuration which is invalid for the detected loss.
Status: current	Access: read-write
NOTIFICATION-TYPE

wdmInvalidBoostAmpOperCnfgClear		1.3.6.1.4.1.18070.2.2.2.2.28.3.0.6
A previously active WDM Invalid Booster-Amplifier Operating Configuration condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.1
The power received for the wavelength channel is outside the operating range.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.2
A previously active Wavelength Channel Received Power Out Of Specification condition has cleared.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchLossOfLightRxCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.3
There is no received optical power detected for the channel.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchLossOfLightRxClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.4
A previously active wavelength channel Receive Loss of Light condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecTxCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.5
The power transmitted for the wavelength channel is outside the operating range.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecTxClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.6
A previously active Wavelength Channel Transmitted Power Out Of Specification condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchLossOfLightTxCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.7
There is no transmitted optical power detected for the channel.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchLossOfLightTxClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.8
A previously active wavelength channel Transmitted Loss of Light condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchUnequippedCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.9
An unequipped indication for the wavelength channel has been received from the far-end node of the line span.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchUnequippedClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.10
A previously active wavelength channel unequipped indication condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchAISCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.11
An alarm indication signal for the wavelength channel has been received from the far-end node of the line span.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchAISClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.12
A previously active wavelength channel alarm indication signal condition has cleared.
Status: current	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxHighCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.13
The power received for the wavelength channel exceeds the upper limit of the normal operating range.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxHighClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.14
A previously active Wavelength Channel Received Power Out Of Specification High condition has cleared.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxLowCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.15
The power received for the wavelength channel is below the lower limit of the normal operating range.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerOutOfSpecRxLowClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.16
A previously active Wavelength Channel Received Power Out Of Specification Low condition has cleared.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerRxHighFailCond		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.17
The power received for the wavelength channel exceeds the maximum allowable level. The wavelength channel is declared to be failed at this power level.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE

wchPowerRxHighFailClear		1.3.6.1.4.1.18070.2.2.2.2.28.4.0.18
A previously active Wavelength Channel Received Power High Fail condition has cleared.
Status: deprecated	Access: read-write
NOTIFICATION-TYPE