BLUEARC-TITAN-MIB

File: BLUEARC-TITAN-MIB.mib (70095 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
BLUEARC-SERVER-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 Counter32 Counter64
IpAddress mib-2 enterprises
DisplayString MODULE-COMPLIANCE OBJECT-GROUP
blueArc blueArcPrivate

Defined Types

VirtualVolumeTitanEntry  
SEQUENCE    
  virtualVolumeTitanSpanId Unsigned32
  virtualVolumeTitanName DisplayString
  virtualVolumeTitanPath DisplayString
  virtualVolumeTitanEmailNumber Integer32
  virtualVolumeTitanQuotaNumber Integer32

VirtualVolumeTitanEmailEntry  
SEQUENCE    
  virtualVolumeTitanEmailAddress DisplayString

VirtualVolumeTitanQuotaTemplateEntry  
SEQUENCE    
  virtualVolumeQuotaTemplateTargetType INTEGER
  virtualVolumeQuotaTemplateIgnoreWellKnownGroups INTEGER
  virtualVolumeTitanQuotaTemplateUsageLimit Unsigned32
  virtualVolumeTitanQuotaTemplateUsageHardLimit INTEGER
  virtualVolumeTitanQuotaTemplateUsageReset Unsigned32
  virtualVolumeTitanQuotaTemplateUsageWarning Unsigned32
  virtualVolumeTitanQuotaTemplateUsageCritical Unsigned32
  virtualVolumeTitanQuotaTemplateFileCountLimit Unsigned32
  virtualVolumeTitanQuotaTemplateFileCountHardLimit INTEGER
  virtualVolumeTitanQuotaTemplateFileCountReset Unsigned32
  virtualVolumeTitanQuotaTemplateFileCountWarning Unsigned32
  virtualVolumeTitanQuotaTemplateFileCountCritical Unsigned32

VirtualVolumeTitanQuotaEntry  
SEQUENCE    
  virtualVolumeTitanQuotaTarget DisplayString
  virtualVolumeTitanQuotaType INTEGER
  virtualVolumeTitanQuotaTargetType INTEGER
  virtualVolumeTitanQuotaUsage Unsigned32
  virtualVolumeTitanQuotaFileCount Unsigned32
  virtualVolumeTitanQuotaUsageLimit Unsigned32
  virtualVolumeTitanQuotaUsageHardLimit INTEGER
  virtualVolumeTitanQuotaUsageReset Unsigned32
  virtualVolumeTitanQuotaUsageWarning Unsigned32
  virtualVolumeTitanQuotaUsageCritical Unsigned32
  virtualVolumeTitanQuotaFileCountLimit Unsigned32
  virtualVolumeTitanQuotaFileCountHardLimit INTEGER
  virtualVolumeTitanQuotaFileCountReset Unsigned32
  virtualVolumeTitanQuotaFileCountWarning Unsigned32
  virtualVolumeTitanQuotaFileCountCritical Unsigned32

VirtualVolumeTitanQuotaDefaultEntry  
SEQUENCE    
  virtualVolumeQuotaDefaultTargetType INTEGER
  virtualVolumeQuotaDefaultIgnoreWellKnownGroups INTEGER
  virtualVolumeTitanQuotaDefaultUsageLimit Counter64
  virtualVolumeTitanQuotaDefaultUsageHardLimit INTEGER
  virtualVolumeTitanQuotaDefaultUsageReset Counter64
  virtualVolumeTitanQuotaDefaultUsageWarning Counter64
  virtualVolumeTitanQuotaDefaultUsageCritical Counter64
  virtualVolumeTitanQuotaDefaultFileCountLimit Unsigned32
  virtualVolumeTitanQuotaDefaultFileCountHardLimit INTEGER
  virtualVolumeTitanQuotaDefaultFileCountReset Unsigned32
  virtualVolumeTitanQuotaDefaultFileCountWarning Unsigned32
  virtualVolumeTitanQuotaDefaultFileCountCritical Unsigned32

VirtualVolumeTitanQuotasEntry  
SEQUENCE    
  virtualVolumeTitanQuotasTarget DisplayString
  virtualVolumeTitanQuotasType INTEGER
  virtualVolumeTitanQuotasTargetType INTEGER
  virtualVolumeTitanQuotasUsage Counter64
  virtualVolumeTitanQuotasFileCount Unsigned32
  virtualVolumeTitanQuotasUsageLimit Counter64
  virtualVolumeTitanQuotasUsageHardLimit INTEGER
  virtualVolumeTitanQuotasUsageReset Counter64
  virtualVolumeTitanQuotasUsageWarning Counter64
  virtualVolumeTitanQuotasUsageCritical Counter64
  virtualVolumeTitanQuotasFileCountLimit Unsigned32
  virtualVolumeTitanQuotasFileCountHardLimit INTEGER
  virtualVolumeTitanQuotasFileCountReset Unsigned32
  virtualVolumeTitanQuotasFileCountWarning Unsigned32
  virtualVolumeTitanQuotasFileCountCritical Unsigned32

NvramEntry  
SEQUENCE    
  spanId Unsigned32
  nvramCurrentUsage Unsigned32
  nvramNumberCheckpoints Unsigned32
  nvramNumberActivityCheckpoints Unsigned32

NvramPoolEntry  
SEQUENCE    
  clusterNodeId Unsigned32
  nvramPoolSize Unsigned32
  nvramPoolMaximumUsed Unsigned32
  nvramPoolTotalCurrentUsage Unsigned32

LagEntry  
SEQUENCE    
  lagName DisplayString
  linkedInterfaces DisplayString

PackageEntry  
SEQUENCE    
  packageName DisplayString
  packageDate DisplayString
  packageSize Unsigned32
  packageDefault INTEGER
  packageCurrent INTEGER

FtpAuditLoggingEntry  
SEQUENCE    
  ftpAuditLoggingEVS Integer32
  ftpConfigAuditLogging INTEGER
  ftpConfigAuditLogDeviceId Integer32
  ftpConfigAuditLogDirectory DisplayString
  ftpConfigAuditLogRecordsPerFile Unsigned32
  ftpConfigAuditMaximumLogFiles Unsigned32

FtpMountpointEntry  
SEQUENCE    
  ftpMountpointName DisplayString
  ftpMountpointEVS Integer32
  ftpMountpointDeviceId Integer32
  ftpMountpointNumberUsers Unsigned32

FtpUsersEntry  
SEQUENCE    
  ftpUsersName DisplayString
  ftpUsersEVS Integer32
  ftpUsersMountPointExists INTEGER
  ftpUsersMountPoint DisplayString
  ftpUsersMountInitDirectory DisplayString

FtpStatisticsEntry  
SEQUENCE    
  ftpStatisticsClusterNode Integer32
  ftpStatisticsTotalSess Counter32
  ftpStatisticsTotalFtpXferIn Counter32
  ftpStatisticsBytesTotalXferIn Counter64
  ftpStatisticsTotalFtpXferOut Counter32
  ftpStatisticsBytesTotalXferOut Counter64
  ftpStatisticsTotalFtpCommands Counter32
  ftpStatisticsTotalFtpReplies Counter32
  ftpStatisticsTotalBytesCommands Counter64
  ftpStatisticsTotalBytesReplies Counter64

Defined Values

blueArcTitan 1.3.6.1.4.1.11096.6.2
The MIB module for monitoring a BlueArc Titan Server.
MODULE-IDENTITY    

blueArcTitanObjs 1.3.6.1.4.1.11096.6.2.1
OBJECT IDENTIFIER    

systemTitan 1.3.6.1.4.1.11096.6.2.1.1
OBJECT IDENTIFIER    

storageTitan 1.3.6.1.4.1.11096.6.2.1.2
OBJECT IDENTIFIER    

virtualVolumesTitan 1.3.6.1.4.1.11096.6.2.1.2.1
OBJECT IDENTIFIER    

nvram 1.3.6.1.4.1.11096.6.2.1.2.2
OBJECT IDENTIFIER    

networkTitan 1.3.6.1.4.1.11096.6.2.1.3
OBJECT IDENTIFIER    

ethernetTitan 1.3.6.1.4.1.11096.6.2.1.3.1
OBJECT IDENTIFIER    

linkAggregation 1.3.6.1.4.1.11096.6.2.1.3.1.1
OBJECT IDENTIFIER    

mgmntTitan 1.3.6.1.4.1.11096.6.2.1.4
OBJECT IDENTIFIER    

packageMgmnt 1.3.6.1.4.1.11096.6.2.1.4.1
OBJECT IDENTIFIER    

fileProtocolTitan 1.3.6.1.4.1.11096.6.2.1.5
OBJECT IDENTIFIER    

ftpTitan 1.3.6.1.4.1.11096.6.2.1.5.1
OBJECT IDENTIFIER    

ftpConfig 1.3.6.1.4.1.11096.6.2.1.5.1.1
OBJECT IDENTIFIER    

ftpMountpoints 1.3.6.1.4.1.11096.6.2.1.5.1.2
OBJECT IDENTIFIER    

ftpUser 1.3.6.1.4.1.11096.6.2.1.5.1.3
OBJECT IDENTIFIER    

ftpStatistics 1.3.6.1.4.1.11096.6.2.1.5.1.4
OBJECT IDENTIFIER    

virtualVolumeTitanNumber 1.3.6.1.4.1.11096.6.2.1.2.1.1
The number of virtual volumes which are currently accessible. NOTE: a virtual volume is only accessible if its associated parent volume is mounted.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

virtualVolumeTitanTable 1.3.6.1.4.1.11096.6.2.1.2.1.2
A table containing information about each virtual volume. The number of entries in this table is given by the value of virtualVolumeTitanNumber.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanEntry

virtualVolumeTitanEntry 1.3.6.1.4.1.11096.6.2.1.2.1.2.1
Information about a virtual volume.
Status: current Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanEntry  

virtualVolumeTitanSpanId 1.3.6.1.4.1.11096.6.2.1.2.1.2.1.1
The parent device of the virtual volume. The device identified by a particular value of this index is the span underlying the volume hosting the Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanName 1.3.6.1.4.1.11096.6.2.1.2.1.2.1.2
The name assigned to the virtual volume by a user for identification purposes.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualVolumeTitanPath 1.3.6.1.4.1.11096.6.2.1.2.1.2.1.3
The path to the root of this Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualVolumeTitanEmailNumber 1.3.6.1.4.1.11096.6.2.1.2.1.2.1.4
The number of email addresses associated with this Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

virtualVolumeTitanQuotaNumber 1.3.6.1.4.1.11096.6.2.1.2.1.2.1.5
The number of quotas associated with this Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

virtualVolumeTitanEmailTable 1.3.6.1.4.1.11096.6.2.1.2.1.3
A table containing the email address associated with this Virtual Volume. The number of entries in this table is given by the value of virtualVolumeTitanEmailNumber, in virtualVolumeTitanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanEmailEntry

virtualVolumeTitanEmailEntry 1.3.6.1.4.1.11096.6.2.1.2.1.3.1
An email address associated with a Virtual Volume, which is uniquely identified by virtualVolumeTitanSpanId and virtualVolumeTitanName in virtualVolumeTitanTable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanEmailEntry  

virtualVolumeTitanEmailAddress 1.3.6.1.4.1.11096.6.2.1.2.1.3.1.1
An email address associated with a Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualVolumeTitanQuotaTemplateTable 1.3.6.1.4.1.11096.6.2.1.2.1.4
A table containing quota templates associated with Virtual Volumes. The template is indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the virtualVolumeQuotaTemplateTargetType. The two types of quota template are: user quota template, and group quota template. The templates define the default quota settings which will be used to create a Default Quota when a user or group begins to use the Virtual Volume. Once the default quota has been created, a user or group's quota may be modified, whence it will become an Explicit Quota. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanQuotaTemplateEntry

virtualVolumeTitanQuotaTemplateEntry 1.3.6.1.4.1.11096.6.2.1.2.1.4.1
A quota template associated with a Virtual Volume. The template is indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the virtualVolumeQuotaTemplateTargetType. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanQuotaTemplateEntry  

virtualVolumeQuotaTemplateTargetType 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.1
The type of a Quota Template associated with a Virtual Volume. user(1) - a Quota Template for a user group(2) - a Quota Template for a group. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER user(1), group(2)  

virtualVolumeQuotaTemplateIgnoreWellKnownGroups 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.2
Should this Quota Template generate a quota for well-known groups. A well-known group would be a group to which many or all of the potential users belong. It may be desired to ignore such a group because a default quota generated would quickly reach usage or file-count thresholds, and cause events to be logged unnecessarily. A value notapplicable(3) will be set if the row in the table relates to a User Quota Template. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ignore(1), include(2), notapplicable(3)  

virtualVolumeTitanQuotaTemplateUsageLimit 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.3
The upper limit set for usage of space in the quota. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateUsageHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.4
Whether the upper limit for usage on the quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1)  

virtualVolumeTitanQuotaTemplateUsageReset 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.5
When a warning limit for usage has been reached, a warning event will not be logged again until the use of the quota has first dropped back to the reset value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateUsageWarning 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.6
A warning event will be logged when the usage of the quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateUsageCritical 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.7
A severe event will be logged when the usage of the quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateFileCountLimit 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.8
The upper limit set for the number of files in the quota. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateFileCountHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.9
Whether the upper limit for number of files in the quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1)  

virtualVolumeTitanQuotaTemplateFileCountReset 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.10
When a warning limit for number of files has been reached, a warning event will not be logged again until the file count in the quota has first dropped back to the reset value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateFileCountWarning 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.11
A warning event will be logged when the file count in the quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTemplateFileCountCritical 1.3.6.1.4.1.11096.6.2.1.2.1.4.1.12
A severe event will be logged when the file count in the quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaTable 1.3.6.1.4.1.11096.6.2.1.2.1.5
A table containing quotas associated with Virtual Volumes. The quotas are indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the quota name. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanQuotaEntry

virtualVolumeTitanQuotaEntry 1.3.6.1.4.1.11096.6.2.1.2.1.5.1
Information about a quota. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanQuotaEntry  

virtualVolumeTitanQuotaTarget 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.1
The target of a quota. If the quota is a Virtual Volume quota (i.e. tracking usage of the entire Virtual Volume, regardless of the user of group) then the target will be 'Virtual Volume Quota'. A User Quota will have a target comprised of the user's domain and user name, in the form \. A Group quota target will consist of the group's domain and group name, in the form \. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualVolumeTitanQuotaType 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.2
Indicates whether the quota is a default or explicit quota. default(1) - the quota has been created automatically using the default values for the Virtual Volume. explicit(2) - the quota has been created explicitly using user-defined values. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER default(1), explicit(2)  

virtualVolumeTitanQuotaTargetType 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.3
Indicates whether the scope of the quota's tracking. user(1) - the quota is tracking a single user's use of the Virtual Volume. group(2) - the quota is tracking a group's use of the Virtual Volume. virtualvolume(3) - the quota is tracking the use of the entire Virtual Volume. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER user(1), group(2), virtualvolume(3)  

virtualVolumeTitanQuotaUsage 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.4
The usage of this quota, in bytes. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaFileCount 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.5
The usage of this quota, in number of files. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaUsageLimit 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.6
The upper limit set for usage of space in this quota. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaUsageHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.7
Whether the upper limit for usage on this quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(3)  

virtualVolumeTitanQuotaUsageReset 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.8
When a warning limit for usage has been reached, a warning event will not be logged again until the use of the quota has first dropped back to the reset value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaUsageWarning 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.9
A warning event will be logged when the usage of a quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaUsageCritical 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.10
A severe event will be logged when the usage of a quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaFileCountLimit 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.11
The upper limit set for the number of files in a quota. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaFileCountHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.12
Whether the upper limit for number of files in a quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(2)  

virtualVolumeTitanQuotaFileCountReset 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.13
When a warning limit for number of files has been reached, a warning event will not be logged again until the file count in a quota has first dropped back to the reset value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaFileCountWarning 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.14
A warning event will be logged when the file count in a quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaFileCountCritical 1.3.6.1.4.1.11096.6.2.1.2.1.5.1.15
A severe event will be logged when the file count in a quota has reached this value. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaDefaultTable 1.3.6.1.4.1.11096.6.2.1.2.1.6
A table containing quota templates (defaults) associated with Virtual Volumes. The template is indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the virtualVolumeQuotaDefaultTargetType. The two types of quota template are: user quota template, and group quota template. The templates define the default quota settings which will be used to create a Default Quota when a user or group begins to use the Virtual Volume. Once the default quota has been created, a user or group's quota may be modified, when it will become an Explicit Quota.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanQuotaDefaultEntry

virtualVolumeTitanQuotaDefaultEntry 1.3.6.1.4.1.11096.6.2.1.2.1.6.1
A quota template (default) associated with a Virtual Volume. The template is indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the virtualVolumeQuotaDefaultTargetType.
Status: current Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanQuotaDefaultEntry  

virtualVolumeQuotaDefaultTargetType 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.1
The type of a Quota Template (default) associated with a Virtual Volume. user(1) - a Quota Template for a user group(2) - a Quota Template for a group.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER user(1), group(2)  

virtualVolumeQuotaDefaultIgnoreWellKnownGroups 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.2
Should this Quota Template (default) generate a quota for well-known groups. A well-known group would be a group to which many or all of the potential users belong. It may be desired to ignore such a group because a default quota generated would quickly reach usage or file-count thresholds, and cause events to be logged unnecessarily. A value notapplicable(3) will be set if the row in the table relates to a User Quota Template.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ignore(1), include(2), notapplicable(3)  

virtualVolumeTitanQuotaDefaultUsageLimit 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.3
The upper limit set for usage of space in the quota.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotaDefaultUsageHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.4
Whether the upper limit for usage on the quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(2)  

virtualVolumeTitanQuotaDefaultUsageReset 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.5
When a warning limit for usage has been reached, a warning event will not be logged again until the use of the quota has first dropped back to the reset value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotaDefaultUsageWarning 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.6
A warning event will be logged when the usage of the quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotaDefaultUsageCritical 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.7
A severe event will be logged when the usage of the quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotaDefaultFileCountLimit 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.8
The upper limit set for the number of files in the quota.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaDefaultFileCountHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.9
Whether the upper limit for number of files in the quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(2)  

virtualVolumeTitanQuotaDefaultFileCountReset 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.10
When a warning limit for number of files has been reached, a warning event will not be logged again until the file count in the quota has first dropped back to the reset value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaDefaultFileCountWarning 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.11
A warning event will be logged when the file count in the quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotaDefaultFileCountCritical 1.3.6.1.4.1.11096.6.2.1.2.1.6.1.12
A severe event will be logged when the file count in the quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotasTable 1.3.6.1.4.1.11096.6.2.1.2.1.7
A table containing quotas associated with Virtual Volumes. The quotas are indexed by the values virtualVolumeTitanSpanId and virtualVolumeTitanTarget in virtualVolumeTitanTable, and the quota name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeTitanQuotasEntry

virtualVolumeTitanQuotasEntry 1.3.6.1.4.1.11096.6.2.1.2.1.7.1
Information about a quota.
Status: current Access: not-accessible
OBJECT-TYPE    
  VirtualVolumeTitanQuotasEntry  

virtualVolumeTitanQuotasTarget 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.1
The target of a quota. If the quota is a Virtual Volume quota (i.e. tracking usage of the entire Virtual Volume, regardless of the user of group) then the target will be 'Virtual Volume Quota'. A User Quota will have a target comprised of the user's domain and user name, in the form \. A Group quota target will consist of the group's domain and group name, in the form \.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

virtualVolumeTitanQuotasType 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.2
Indicates whether the quota is a default or explicit quota. default(1) - the quota has been created automatically using the default values for the Virtual Volume. explicit(2) - the quota has been created explicitly using user-defined values.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(1), explicit(2), unknown(3)  

virtualVolumeTitanQuotasTargetType 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.3
Indicates whether the scope of the quota's tracking. user(1) - the quota is tracking a single user's use of the Virtual Volume. group(2) - the quota is tracking a group's use of the Virtual Volume. virtualvolume(3) - the quota is tracking the use of the entire Virtual Volume.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER user(1), group(2), virtualvolume(3), unknown(4)  

virtualVolumeTitanQuotasUsage 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.4
The usage of this quota, in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotasFileCount 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.5
The usage of this quota, in number of files.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotasUsageLimit 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.6
The upper limit set for usage of space in this quota.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotasUsageHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.7
Whether the upper limit for usage on this quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(2)  

virtualVolumeTitanQuotasUsageReset 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.8
When a warning limit for usage has been reached, a warning event will not be logged again until the use of the quota has first dropped back to the reset value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotasUsageWarning 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.9
A warning event will be logged when the usage of a quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotasUsageCritical 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.10
A severe event will be logged when the usage of a quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

virtualVolumeTitanQuotasFileCountLimit 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.11
The upper limit set for the number of files in a quota.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotasFileCountHardLimit 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.12
Whether the upper limit for number of files in a quota is a hard limit. soft(1) - not a hard limit. hard(2) - a hard limit.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER soft(0), hard(1), unknown(2)  

virtualVolumeTitanQuotasFileCountReset 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.13
When a warning limit for number of files has been reached, a warning event will not be logged again until the file count in a quota has first dropped back to the reset value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotasFileCountWarning 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.14
A warning event will be logged when the file count in a quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

virtualVolumeTitanQuotasFileCountCritical 1.3.6.1.4.1.11096.6.2.1.2.1.7.1.15
A severe event will be logged when the file count in a quota has reached this value.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

nvramSize 1.3.6.1.4.1.11096.6.2.1.2.2.1
The total size of nvram. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero. This object is obsolete, and is re-implemented in nvramPoolTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramMaximumUsed 1.3.6.1.4.1.11096.6.2.1.2.2.2
The maximum amount of nvram used. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero. This object is obsolete, and is re-implemented in nvramPoolTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramTotalCurrentUsage 1.3.6.1.4.1.11096.6.2.1.2.2.3
The amount of nvram currently in use. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero. This object is obsolete, and is re-implemented in nvramPoolTable.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramNumber 1.3.6.1.4.1.11096.6.2.1.2.2.4
The number of volumes with NVRAM statistics.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramTable 1.3.6.1.4.1.11096.6.2.1.2.2.5
A table of NVRAM data for a given volume.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvramEntry

nvramEntry 1.3.6.1.4.1.11096.6.2.1.2.2.5.1
Information about NVRAM on a given volume. The volume must be formatted, mounted, and NVRAM must be supported.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  NvramEntry  

spanId 1.3.6.1.4.1.11096.6.2.1.2.2.5.1.1
The id of the Span hosting the volume with which the NVRAM is associated.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

nvramCurrentUsage 1.3.6.1.4.1.11096.6.2.1.2.2.5.1.2
The amount of NVRAM currently in use for this volume.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

nvramNumberCheckpoints 1.3.6.1.4.1.11096.6.2.1.2.2.5.1.3
The total number of checkpoints which have occurred for the NVRAM assigned to this volume.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

nvramNumberActivityCheckpoints 1.3.6.1.4.1.11096.6.2.1.2.2.5.1.4
The number of checkpoints which have occurred for the NVRAM assigned to this volume as a result of file system activity (i.e. not timed checkpoints.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

nvramPoolTable 1.3.6.1.4.1.11096.6.2.1.2.2.6
A table of NVRAM data for a given Cluster Node.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NvramPoolEntry

nvramPoolEntry 1.3.6.1.4.1.11096.6.2.1.2.2.6.1
Information about NVRAM on a given Cluster Node.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  NvramPoolEntry  

clusterNodeId 1.3.6.1.4.1.11096.6.2.1.2.2.6.1.1
The ID of the cluster node for which these pool statistics are reported.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

nvramPoolSize 1.3.6.1.4.1.11096.6.2.1.2.2.6.1.2
The total size of nvram. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolMaximumUsed 1.3.6.1.4.1.11096.6.2.1.2.2.6.1.3
The maximum amount of nvram used. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolTotalCurrentUsage 1.3.6.1.4.1.11096.6.2.1.2.2.6.1.4
The amount of nvram currently in use. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32 1..2147483647  

lagNumber 1.3.6.1.4.1.11096.6.2.1.3.1.1.1
The number of link aggregation which may be configured on each Cluster Node of a system.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..32  

lagTable 1.3.6.1.4.1.11096.6.2.1.3.1.1.2
A table of information about link aggregations configured.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LagEntry

lagEntry 1.3.6.1.4.1.11096.6.2.1.3.1.1.2.1
Information about link aggregations.
Status: current Access: not-accessible
OBJECT-TYPE    
  LagEntry  

lagName 1.3.6.1.4.1.11096.6.2.1.3.1.1.2.1.1
The name of the Link Aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

linkedInterfaces 1.3.6.1.4.1.11096.6.2.1.3.1.1.2.1.2
A list of physical interfaces in the Link Aggregation.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

packageNumber 1.3.6.1.4.1.11096.6.2.1.4.1.1
The number of packages in flash.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

packageTable 1.3.6.1.4.1.11096.6.2.1.4.1.2
A table containing details of the packages available in flash.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PackageEntry

packageEntry 1.3.6.1.4.1.11096.6.2.1.4.1.2.1
Information about the packages in flash.
Status: current Access: not-accessible
OBJECT-TYPE    
  PackageEntry  

packageName 1.3.6.1.4.1.11096.6.2.1.4.1.2.1.1
The name of the package.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

packageDate 1.3.6.1.4.1.11096.6.2.1.4.1.2.1.2
The date on which the package was uploaded.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

packageSize 1.3.6.1.4.1.11096.6.2.1.4.1.2.1.3
The size of the package in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

packageDefault 1.3.6.1.4.1.11096.6.2.1.4.1.2.1.4
Whether the package is the default package. The default package is the package which will be loaded when the server is rebooted. default(1) - the default package. notdefault(2) - not the default package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER default(0), notdefault(1)  

packageCurrent 1.3.6.1.4.1.11096.6.2.1.4.1.2.1.5
Whether the package is the current package. The current package is the package which was loaded when the server was rebooted. current(1) - the current package. notcurrent(2) - not the current package.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER current(0), notcurrent(1)  

packageFreeSpace 1.3.6.1.4.1.11096.6.2.1.4.1.3
The amount of available flash file-space, in bytes.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..4294967295  

ftpConfigServiceEnabled 1.3.6.1.4.1.11096.6.2.1.5.1.1.1
Indicates whether the FTP service is enabled. enabled(1) - the service is enabled disabled(2) - the service is disabled unknown(3) - the status of the service cannot be determined. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), unknown(3)  

ftpConfigServiceMaxUsers 1.3.6.1.4.1.11096.6.2.1.5.1.1.2
The maximum number of FTP users the service will allow. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

ftpConfigTimeout 1.3.6.1.4.1.11096.6.2.1.5.1.1.3
The FTP session timeout in minutes. NOTE: this value applies to all FTP sessions. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

ftpConfigNTPasswordEnabled 1.3.6.1.4.1.11096.6.2.1.5.1.1.4
Indicates whether FTP uses NT password authentication. enabled(1) - NT security is enabled disabled(2) - NT security is disabled notavailable(3) - NT security is not available unknown(4) - the status of NT security cannot be determined. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notavailable(3), unknown(4)  

ftpConfigNISPasswordEnabled 1.3.6.1.4.1.11096.6.2.1.5.1.1.5
Indicates whether FTP uses NIS password authentication. enabled(1) - NIS security is enabled disabled(2) - NIS security is disabled notavailable(3) - NIS security is not available unknown(4) - the status of NIS security cannot be determined. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), notavailable(3), unknown(4)  

ftpAuditLoggingTable 1.3.6.1.4.1.11096.6.2.1.5.1.1.6
A table containing the FTP audit logging configuration for the system. The number of entries in this table is given by the number of EVSs. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FtpAuditLoggingEntry

ftpAuditLoggingEntry 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1
FTP audit logging information.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  FtpAuditLoggingEntry  

ftpAuditLoggingEVS 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.1
The ID of the EVS the FTP audit logging configuration is associated with. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

ftpConfigAuditLogging 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.2
Indicates whether FTP Audit logging is enabled on this Cluster Node. enabled(1) - logging is enabled disabled(2) - logging is disabled unknown(3) - the status of logging cannot be determined. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), unknown(3)  

ftpConfigAuditLogDeviceId 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.3
The Device ID of the volume to which the FTP server is to write the audit log. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

ftpConfigAuditLogDirectory 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.4
The directory to which the FTP server is to write the audit log. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpConfigAuditLogRecordsPerFile 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.5
The number of records in each audit log file. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

ftpConfigAuditMaximumLogFiles 1.3.6.1.4.1.11096.6.2.1.5.1.1.6.1.6
The maximum number of audit log files. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

ftpMountpointNumber 1.3.6.1.4.1.11096.6.2.1.5.1.2.1
The number of FTP mount points which are configured for the system. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

ftpMountpointTable 1.3.6.1.4.1.11096.6.2.1.5.1.2.2
A table containing the FTP mount point configuration for the system. The number of entries in this table is given by the value of ftpMountpointNumber. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FtpMountpointEntry

ftpMountpointEntry 1.3.6.1.4.1.11096.6.2.1.5.1.2.2.1
FTP mount point information. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  FtpMountpointEntry  

ftpMountpointName 1.3.6.1.4.1.11096.6.2.1.5.1.2.2.1.1
The name of the FTP mount point. Each FTP mount point has a unique name. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpMountpointEVS 1.3.6.1.4.1.11096.6.2.1.5.1.2.2.1.2
The ID of the EVS the FTP mount point is associated with. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

ftpMountpointDeviceId 1.3.6.1.4.1.11096.6.2.1.5.1.2.2.1.3
The device ID of the volume the FTP mount point is associated with. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 1..2147483647  

ftpMountpointNumberUsers 1.3.6.1.4.1.11096.6.2.1.5.1.2.2.1.4
The number of users of the FTP mount point. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

ftpNumberUsers 1.3.6.1.4.1.11096.6.2.1.5.1.3.1
The number of FTP users which are configured for the system. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

ftpUsersTable 1.3.6.1.4.1.11096.6.2.1.5.1.3.2
A table containing the FTP user configuration for the system. The number of entries in this table is given by the value of ftpNumberUsers. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FtpUsersEntry

ftpUsersEntry 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1
FTP user information. This object is now obsolete.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  FtpUsersEntry  

ftpUsersName 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1.1
The name of the FTP user. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpUsersEVS 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1.2
The ID of the EVS the user is associated with. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32 0..255  

ftpUsersMountPointExists 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1.3
Indicates whether the FTP mount point is configured in the ftpMountTable. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER exists(1), doesnotExist(2)  

ftpUsersMountPoint 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1.4
The name of the FTP users mount point. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpUsersMountInitDirectory 1.3.6.1.4.1.11096.6.2.1.5.1.3.2.1.5
The FTP users initial directory. This object is now obsolete.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DisplayString  

ftpStatisticsTable 1.3.6.1.4.1.11096.6.2.1.5.1.4.1
The statistics for the FTP services. The number of entries in this table is given by the value of clusterPNodeNumber in BLUEARC-SERVER-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FtpStatisticsEntry

ftpStatisticsEntry 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1
The statistics for the FTP services.
Status: current Access: not-accessible
OBJECT-TYPE    
  FtpStatisticsEntry  

ftpStatisticsClusterNode 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.1
The Cluster Node on which this FTP service exists.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..255  

ftpStatisticsTotalSess 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.2
The total number of FTP sessions since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatisticsTotalFtpXferIn 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.3
The total number of data transfers (files) in since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatisticsBytesTotalXferIn 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.4
The total number of data bytes transferred in since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ftpStatisticsTotalFtpXferOut 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.5
The total number of data transfers (files) out since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatisticsBytesTotalXferOut 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.6
The total number of data bytes transferred out since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ftpStatisticsTotalFtpCommands 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.7
The total number of commands issued from clients since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatisticsTotalFtpReplies 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.8
The total number of replies sent to clients since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ftpStatisticsTotalBytesCommands 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.9
The total number of bytes received in commands since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

ftpStatisticsTotalBytesReplies 1.3.6.1.4.1.11096.6.2.1.5.1.4.1.1.10
The total number of bytes set in replies since power up.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64