BLUEARC-SERVER-MIB

File: BLUEARC-SERVER-MIB.mib (480271 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Integer32
Unsigned32 Counter32 Counter64
IpAddress mib-2 enterprises
DisplayString MODULE-COMPLIANCE OBJECT-GROUP
ifIndex

Defined Types

PuConfigEntry  
SEQUENCE    
  puConfigIndex Integer32
  puConfigShutdownEnabled INTEGER
  puConfigShutdownInterval INTEGER
  puConfigShutdownRemainingLife INTEGER
  puConfigCommsOK INTEGER
  puConfigCommsEverOK INTEGER

PuConfigurationEntry  
SEQUENCE    
  puConfigurationIndex IpAddress
  puConfigurationUserName DisplayString
  puConfigurationMonitoringEnabled INTEGER
  puConfigurationShutdownOnBattery Integer32
  puConfigurationShutdownOnRuntime Integer32
  puConfigurationShutdownOnLowBattery Integer32
  puConfigurationOnBatteryTolerance Integer32
  puConfigurationCommsOK INTEGER
  puConfigurationCommsEverOK INTEGER

PuStatusEntry  
SEQUENCE    
  puStatusIndex Integer32
  puStatusModel DisplayString
  puStatusSerialNumber DisplayString
  puStatusManufactureDate DisplayString
  puStatusBatteryReplaceDate DisplayString
  puStatusUpperTransferVoltage Integer32
  puStatusLowerTransferVoltage Integer32
  puStatusSensitivity INTEGER
  puStatusLowBatteryInterval Integer32
  puStatusAlarmSetting INTEGER
  puStatusCalibrating INTEGER
  puStatusSleeping INTEGER
  puStatusOnline INTEGER
  puStatusOnBattery INTEGER
  puStatusBatteryAlmostUsedUp INTEGER
  puStatusChangeBattery INTEGER

PuCurrentStatusEntry  
SEQUENCE    
  puCurrentStatusIndex IpAddress
  puCurrentStatusModel DisplayString
  puCurrentStatusSerialNumber DisplayString
  puCurrentStatusManufactureDate DisplayString
  puCurrentStatusBatteryReplacedDate DisplayString
  puCurrentStatusUpperTransferVoltage Integer32
  puCurrentStatusLowerTransferVoltage Integer32
  puCurrentStatusSensitivity INTEGER
  puCurrentStatusLowBatteryInterval Integer32
  puCurrentStatusAlarmSetting INTEGER
  puCurrentStatusCalibrating INTEGER
  puCurrentStatusSleeping INTEGER
  puCurrentStatusSmartTrim INTEGER
  puCurrentStatusSmartBoost INTEGER
  puCurrentStatusOnline INTEGER
  puCurrentStatusOnBattery INTEGER
  puCurrentStatusOverload INTEGER
  puCurrentStatusBatteryAlmostUsedUp INTEGER
  puCurrentStatusChangeBattery INTEGER

PuStatsEntry  
SEQUENCE    
  puStatsIndex Integer32
  puStatsBatteryCharge INTEGER
  puStatsLoad INTEGER
  puStatsFrequency Integer32
  puStatsLineVoltage Integer32
  puStatsOutputVoltage Integer32
  puStatsBatteryVoltage Integer32
  puStatsTemperatureC Integer32
  puStatsTemperatureF Integer32
  puStatsLineMininumVoltage Integer32
  puStatsLineMaximumVoltage Integer32
  puStatsRemainingRunTime Integer32

PuStatisticsEntry  
SEQUENCE    
  puStatisticsIndex Integer32
  puStatisticsBatteryCharge INTEGER
  puStatisticsLoad INTEGER
  puStatisticsFrequency Integer32
  puStatisticsLineVoltage Integer32
  puStatisticsOutputVoltage Integer32
  puStatisticsBatteryVoltage Integer32
  puStatisticsTemperatureC Integer32
  puStatisticsTemperatureF Integer32
  puStatisticsLineMininumVoltage Integer32
  puStatisticsLineMaximumVoltage Integer32
  puStatisticsRemainingRunTime Integer32

SensorEntry  
SEQUENCE    
  sensorIndex Integer32
  sensorSpeedStatus INTEGER
  sensorSpeedReading Unsigned32
  sensorTempStatus INTEGER
  sensorTempCReading Integer32
  sensorTempFReading Integer32

TemperatureSensorEntry  
SEQUENCE    
  temperatureSensorClusterNode Integer32
  temperatureSensorIndex Integer32
  temperatureSensorStatus INTEGER
  temperatureSensorCReading Integer32
  temperatureSensorFReading Integer32

FanEntry  
SEQUENCE    
  fanClusterNode Integer32
  fanIndex Integer32
  fanFittedStatus INTEGER
  fanSpeedStatus INTEGER
  fanSpeed Integer32

PsuEntry  
SEQUENCE    
  psuClusterNode Integer32
  psuIndex Integer32
  psuStatus INTEGER

NtpServerEntry  
SEQUENCE    
  ntpServerHost DisplayString

ClusterPNodeEntry  
SEQUENCE    
  clusterPNodeId Integer32
  clusterPNodeName DisplayString
  clusterPNodeIpAddr IpAddress
  clusterPNodeStatus INTEGER

ClusterVNodeEntry  
SEQUENCE    
  clusterVNodeId Integer32
  clusterVNodeName DisplayString
  clusterVNodeIpAddr IpAddress
  clusterVNodeStatus INTEGER
  clusterVNodeAdmin INTEGER
  clusterVNodeHostedBy Integer32

SerialNumberEntry  
SEQUENCE    
  componentType INTEGER
  subComponentType INTEGER
  clusterNode Integer32
  serialNumber DisplayString

RackEntry  
SEQUENCE    
  rackIndex Integer32
  rackStatus INTEGER
  rackNumberOfEnclosures Unsigned32
  rackNumberOfPhysicalDrives Unsigned32

RaidControllerEntry  
SEQUENCE    
  raidControllerRackIndex Integer32
  raidControllerWWN DisplayString
  raidControllerPrimaryStatus INTEGER
  raidControllerSecondaryStatus INTEGER
  raidControllerManufacturer DisplayString
  raidControllerModel DisplayString
  raidControllerCacheSize Unsigned32

RaidControllerConfigEntry  
SEQUENCE    
  raidControllerConfigRackIndex Integer32
  raidControllerConfigDRAMSize Unsigned32
  raidControllerConfigFlashSize Unsigned32
  raidControllerConfigNVRSize Unsigned32
  raidControllerConfigClockSpeed Unsigned32
  raidControllerConfigMemAccess Unsigned32
  raidControllerConfigMemCycle Unsigned32
  raidControllerConfigPhysicalSectorSize Unsigned32
  raidControllerConfigLogicalSectorSize Unsigned32
  raidControllerConfigMaxSystemDrives Unsigned32
  raidControllerConfigMaxDrivesPerSystemDrive Unsigned32
  raidControllerConfigMaxSpanPerVirtualDrive Unsigned32
  raidControllerConfigFirmwareVersion DisplayString
  raidControllerConfigFirmwareType Unsigned32
  raidControllerConfigFirmwareMajor Unsigned32
  raidControllerConfigFirmwareMinor Unsigned32
  raidControllerConfigMaximumCommands Unsigned32
  raidControllerConfigFirmwareBuild Unsigned32
  raidControllerConfigRebuildRate Unsigned32
  raidControllerConfigRebuildUnit Unsigned32
  raidControllerConfigRebuildOn Unsigned32
  raidControllerConfigRebuildOff Unsigned32

RaidControllerBatteryBackupEntry  
SEQUENCE    
  raidControllerBatteryBackupRackIndex Integer32
  raidControllerBatteryBackupNoSync INTEGER
  raidControllerBatteryBackupOutOfSync INTEGER
  raidControllerBatteryBackupFirstWarning INTEGER
  raidControllerBatteryBackupSecondWarning INTEGER
  raidControllerBatteryBackupReconditioning INTEGER
  raidControllerBatteryBackupDischarging INTEGER
  raidControllerBatteryBackupFastCharging INTEGER
  raidControllerBatteryBackupLowPower INTEGER
  raidControllerBatteryBackupChargePercent INTEGER
  raidControllerBatteryBackupHardwareVersion Unsigned32
  raidControllerBatteryBackupBatteryType INTEGER
  raidControllerBatteryBackupThreshold Unsigned32

RaidControllerActiveTaskEntry  
SEQUENCE    
  raidControllerActiveTaskRackIndex Integer32
  raidControllerActiveTaskIndex Unsigned32
  raidControllerActiveTaskType INTEGER
  raidControllerActiveTaskLUN Unsigned32
  raidControllerActiveTaskPercentageDone INTEGER

PhysicalDriveEntry  
SEQUENCE    
  physicalDriveRackIndex Integer32
  physicalDriveEnclosureIndex Unsigned32
  physicalDriveColumnIndex Unsigned32
  physicalDriveRowIndex Unsigned32
  physicalDriveStatus INTEGER
  physicalDriveVendor INTEGER
  physicalDriveVersion DisplayString
  physicalDriveCapacity Counter64

EnclosureFanEntry  
SEQUENCE    
  enclosureFanRackIndex Integer32
  enclosureFanEnclosureIndex Unsigned32
  enclosureFanFanIndex Unsigned32
  enclosureFanStatus INTEGER
  enclosureFanSpeed INTEGER

EnclosureTemperatureEntry  
SEQUENCE    
  enclosureTemperatureRackIndex Integer32
  enclosureTemperatureEnclosureIndex Integer32
  enclosureTemperatureTempIndex Integer32
  enclosureTemperatureStatus INTEGER
  enclosureTemperatureOverTemp INTEGER
  enclosureTemperatureTempC Integer32
  enclosureTemperatureTempF Integer32
  enclosureTemperatureRange INTEGER

EnclosurePSUEntry  
SEQUENCE    
  enclosurePSURackIndex Integer32
  enclosurePSUEnclosureIndex Integer32
  enclosurePSUPSUIndex Integer32
  enclosurePSUStatus INTEGER

EnclosureAlarmEntry  
SEQUENCE    
  enclosureAlarmRackIndex Integer32
  enclosureAlarmEnclosureIndex Integer32
  enclosureAlarmAlarmIndex Integer32
  enclosureAlarmStatus INTEGER
  enclosureAlarmBeeping INTEGER

AutomountEntry  
SEQUENCE    
  automountIndex Integer32
  automountPartitionIndex Unsigned32
  automountWWN DisplayString
  automountLUN Unsigned32

SysDriveEntry  
SEQUENCE    
  sysDriveIndex Integer32
  sysDriveWWN DisplayString
  sysDriveLUN Unsigned32
  sysDriveStatus INTEGER
  sysDriveCapacity Counter64
  sysDriveRaidLevel INTEGER
  sysDriveCacheMode INTEGER

VolumeEntry  
SEQUENCE    
  volumeSysDriveIndex Integer32
  volumePartitionID Unsigned32
  volumeLabel DisplayString
  volumeStatus INTEGER
  volumeCapacity Counter64
  volumeFreeCapacity Counter64
  volumeEnterpriseVirtualServer DisplayString

FsStatsEntry  
SEQUENCE    
  fsPermId Counter64
  fsLabel DisplayString
  opsPerSecAverage Unsigned32

FcStatsEntry  
SEQUENCE    
  fcInterfaceIndex Integer32
  fcInstantaneousInRate Counter32
  fcInstantaneousOutRate Counter32
  fcPeakInRate Counter32
  fcPeakOutRate Counter32
  fcSignalLossErrors Counter32
  fcBadRXCharErrors Counter32
  fcLossSyncErrors Counter32
  fcLinkFailErrors Counter32
  fcRXEOFErrors Counter32
  fcDiscardedFrameErrors Counter32
  fcBadCRCErrors Counter32
  fcProtocolErrors Counter32

FcStatisticsEntry  
SEQUENCE    
  fcStatsClusterNode Integer32
  fcStatsInterfaceIndex Integer32
  fcStatsInterfaceEnabled INTEGER
  fcStatsInterfaceStatus INTEGER
  fcStatsInterfaceLinkSpeed Integer32
  fcStatsInterfaceLinkType INTEGER
  fcStatsInstantaneousInRate Counter32
  fcStatsInstantaneousOutRate Counter32
  fcStatsPeakInRate Counter32
  fcStatsPeakOutRate Counter32
  fcStatsTotalRxBytes Counter64
  fcStatsTotalTxBytes Counter64
  fcStatsSignalLossErrors Counter32
  fcStatsBadRXCharErrors Counter32
  fcStatsLossSyncErrors Counter32
  fcStatsLinkFailErrors Counter32
  fcStatsRXEOFErrors Counter32
  fcStatsDiscardedFrameErrors Counter32
  fcStatsBadCRCErrors Counter32
  fcStatsProtocolErrors Counter32

VirtualVolumeEntry  
SEQUENCE    
  virtualVolumeSysDriveIndex Integer32
  virtualVolumePartitionID Unsigned32
  virtualVolumeLabel DisplayString
  virtualVolumeQuotaEnabled INTEGER
  virtualVolumeLimit Counter64
  virtualVolumeWarningAlert Integer32
  virtualVolumeCriticalAlert Integer32
  virtualVolumeHardLimitEnabled INTEGER
  virtualVolumeQuotaBytesUsed Counter64
  virtualVolumeQuotaPercentageUsed Integer32

MemberListEntry  
SEQUENCE    
  memberListVolumeSysDriveIndex Integer32
  memberListVolumePartitionID Unsigned32
  memberListVirtualVolumeLabel DisplayString
  memberListIndex Integer32
  memberListPath DisplayString
  memberListStatus INTEGER

SnapshotRuleEntry  
SEQUENCE    
  snapshotRuleName DisplayString
  snapshotRuleWWN DisplayString
  snapshotRuleLUN Unsigned32
  snapshotRulePartitionID Unsigned32
  snapshotRuleQueueSize Integer32
  snapshotRuleVolumeLabel DisplayString

SnapshotScheduleEntry  
SEQUENCE    
  snapshotScheduleRuleName DisplayString
  snapshotScheduleIndex Integer32
  snapshotScheduleDateTimeSpec DisplayString

SnapshotRulesEntry  
SEQUENCE    
  snapshotRulesEVS Unsigned32
  snapshotRulesName DisplayString
  snapshotRulesQueueSize Integer32
  snapshotRulesVolumeLabel DisplayString

SnapshotSchedulesEntry  
SEQUENCE    
  snapshotSchedulesEVS Unsigned32
  snapshotSchedulesRuleName DisplayString
  snapshotSchedulesIndex Integer32
  snapshotSchedulesDateTimeSpec DisplayString

NvramFsStatsEntry  
SEQUENCE    
  fsId Unsigned32
  nvramFsStatsCurrentUsage Unsigned32
  nvramFsStatsCheckpoints Unsigned32
  nvramFsStatsActivityCheckpoints Unsigned32
  nvramFsStatsWaitedAllocs Unsigned32
  nvramFsStatsWaitingAllocs Unsigned32

NvramPoolStatsEntry  
SEQUENCE    
  clusterNodeId Unsigned32
  nvramPoolStatsSize Unsigned32
  nvramPoolStatsMaximumUsed Unsigned32
  nvramPoolStatsTotalCurrentUsage Unsigned32
  nvramPoolStatsWaitedAllocs Unsigned32
  nvramPoolStatsWaitingAllocs Unsigned32

EthernetStatisticsEntry  
SEQUENCE    
  ethernetInstInOctetRate Counter32
  ethernetInstOutOctetRate Counter32
  ethernetPkInOctetRate Counter32
  ethernetPkOutOctetRate Counter32
  ethernetInFIFODrops Counter64
  ethernetCRCErrs Counter64
  ethernetOutFIFOUflows Counter64
  ethernetOutOneCollision Counter64
  ethernetOutTwoCollision Counter64
  ethernetOutFifteenCollision Counter64
  ethernetInEvFIFOPktDrop Counter64
  ethernetEvFIFOMaxEvents Counter64
  ethernetOutPackets Counter64
  ethernetInPackets Counter64
  ethernetTotalPackets Counter64
  ethernetOutBytes Counter64
  ethernetInBytes Counter64
  ethernetTotalBytes Counter64

TcpStatisticsEntry  
SEQUENCE    
  tcpTxSegments Counter64
  tcpRxSegments Counter64
  tcpReTxSegments Counter64
  tcpInvalidSegments Counter64
  tcpIPTxPkts Counter64
  tcpIPRxPkts Counter64
  tcpIPRxInvalidPkts Counter64
  tcpIPRxInvalidHdrPkts Counter64
  tcpIPRxInvalidChksumPkts Counter64
  tcpIPRxInvalidNUcastAddrPkts Counter64
  tcpIPRxInvalidUcastAddrPkts Counter64
  tcpIPRxInvalidSrcAddrPkts Counter64
  tcpIPRxInvalidOptionPkts Counter64
  tcpIPMiscBadSegments Counter64
  tcpRxOversizeSegmentErrs Counter64
  tcpRxInvalidChksumPkts Counter64
  tcpLinkPacketDrops Counter64

UdpStatisticsEntry  
SEQUENCE    
  udpRxShortPkts Counter64
  udpRxInvChksumPkts Counter64

DnsServerEntry  
SEQUENCE    
  dnsServerIndex Integer32
  dnsServerIpAddress IpAddress

DnsSearchEntry  
SEQUENCE    
  dnsSearchIndex Integer32
  dnsSearchString DisplayString

NameServiceEntry  
SEQUENCE    
  nameServiceOrder Integer32
  nameServiceType INTEGER

NisServerEntry  
SEQUENCE    
  nisServerIndex Integer32
  nisServerIpAddress IpAddress
  nisServerPriority Integer32

ShareEntry  
SEQUENCE    
  shareName DisplayString
  sharePath DisplayString
  shareComment DisplayString
  shareUsers Unsigned32
  shareWWN DisplayString
  shareLUN Unsigned32
  sharePartitionID Unsigned32
  shareMaxUsers Integer32

CifsShareEntry  
SEQUENCE    
  cifsShareEvsId Integer32
  cifsShareName DisplayString
  cifsSharePath DisplayString
  cifsShareComment DisplayString
  cifsShareUsers Unsigned32
  cifsShareMaxUsers Integer32
  cifsShareSpanId Integer32

ShareAccessEntry  
SEQUENCE    
  shareAccessIndex Integer32
  shareAccessShareName DisplayString
  shareAccessName DisplayString
  shareAccessPerms INTEGER

CifsStatsEntry  
SEQUENCE    
  cifsStatsClusterNode Unsigned32
  clients Unsigned32
  mkdirCalls Unsigned32
  rmdirCalls Unsigned32
  openCalls Unsigned32
  createCalls Unsigned32
  closeCalls Unsigned32
  flushCalls Unsigned32
  unlinkCalls Unsigned32
  renameCalls Unsigned32
  getatrCalls Unsigned32
  setatrCalls Unsigned32
  readCalls Unsigned32
  writeCalls Unsigned32
  mknewCalls Unsigned32
  chkpthCalls Unsigned32
  lseekCalls Unsigned32
  readBrawCalls Unsigned32
  writeBrawCalls Unsigned32
  lockingXCalls Unsigned32
  transCalls Unsigned32
  echoCalls Unsigned32
  writeCloseCalls Unsigned32
  openXCalls Unsigned32
  readXCalls Unsigned32
  writeXCalls Unsigned32
  trans2Calls Unsigned32
  findCloseCalls Unsigned32
  tdisCalls Unsigned32
  negProtCalls Unsigned32
  sessSetupXCalls Unsigned32
  ulogoffXCalls Unsigned32
  tconXCalls Unsigned32
  dskattrCalls Unsigned32
  searchCalls Unsigned32
  ntTransCalls Unsigned32
  ntTranssCalls Unsigned32
  ntCreateXCalls Unsigned32
  ntCancelCalls Unsigned32

NfsExportEntry  
SEQUENCE    
  nfsExportIndex Integer32
  nfsExportName DisplayString
  nfsExportPath DisplayString
  nfsExportNumberMounts Unsigned32
  nfsExportWWN DisplayString
  nfsExportLUN Unsigned32
  nfsExportPartitionID Unsigned32

NfsExportsEntry  
SEQUENCE    
  nfsExportsEvs Unsigned32
  nfsExportsName DisplayString
  nfsExportsPath DisplayString
  nfsExportsDeviceId Unsigned32

NfsUserEntry  
SEQUENCE    
  nfsUserName DisplayString
  nfsUserID Unsigned32

NfsUserMappingEntry  
SEQUENCE    
  nfsUserMappingUnixUserName DisplayString
  nfsUserMappingUnixUserIDValid INTEGER
  nfsUserMappingUnixUserID Unsigned32
  nfsUserMappingNtUserName DisplayString
  nfsUserMappingNtUserDomainName DisplayString

NfsGroupEntry  
SEQUENCE    
  nfsGroupName DisplayString
  nfsGroupID Unsigned32

NfsGroupMappingEntry  
SEQUENCE    
  nfsGroupMappingUnixGroupName DisplayString
  nfsGroupMappingUnixGroupIDValid INTEGER
  nfsGroupMappingUnixGroupID Unsigned32
  nfsGroupMappingNtGroupName DisplayString
  nfsGroupMappingNtGroupDomainName DisplayString

NfsV2StatsEntry  
SEQUENCE    
  nfsV2StatsClusterNode Unsigned32
  nfsV2nullCalls Counter32
  nfsV2getAttrCalls Counter32
  nfsV2setAttrCalls Counter32
  nfsV2rootCalls Counter32
  nfsV2lookupCalls Counter32
  nfsV2readLink Counter32
  nfsV2read Counter32
  nfsV2writeCache Counter32
  nfsV2write Counter32
  nfsV2create Counter32
  nfsV2remove Counter32
  nfsV2rename Counter32
  nfsV2link Counter32
  nfsV2symLink Counter32
  nfsV2mkDir Counter32
  nfsV2rmDir Counter32
  nfsV2readDir Counter32
  nfsV2statFS Counter32

NfsV3StatsEntry  
SEQUENCE    
  nfsV3StatsClusterNode Unsigned32
  nfsV3nullCalls Counter32
  nfsV3getAttrCalls Counter32
  nfsV3setAttrCalls Counter32
  nfsV3lookupCalls Counter32
  nfsV3accessCalls Counter32
  nfsV3readLink Counter32
  nfsV3read Counter32
  nfsV3write Counter32
  nfsV3create Counter32
  nfsV3mkdir Counter32
  nfsV3symLink Counter32
  nfsV3mkNod Counter32
  nfsV3remove Counter32
  nfsV3rmDir Counter32
  nfsV3rename Counter32
  nfsV3link Counter32
  nfsV3readDir Counter32
  nfsV3readDirPlus Counter32
  nfsV3fsStat Counter32
  nfsV3fsInfo Counter32
  nfsV3pathConf Counter32
  nfsV3commit Counter32

FtpMountEntry  
SEQUENCE    
  ftpMountName DisplayString
  ftpMountNumberUsers Unsigned32
  ftpMountWWN DisplayString
  ftpMountLUN Unsigned32
  ftpMountPartitionID Unsigned32

FtpUserEntry  
SEQUENCE    
  ftpUserName DisplayString
  ftpUserMountPointExists INTEGER
  ftpUserMountPoint DisplayString
  ftpUserMountInitDirectory DisplayString

HttpMimeMapEntry  
SEQUENCE    
  httpMimeMapIndex Integer32
  httpMimeMapExtension DisplayString
  httpMimeMapType DisplayString

IScsiParameterEntry  
SEQUENCE    
  iScsiParameterEVS Unsigned32
  iScsiParameterName DisplayString
  iScsiParameterIsBoolean INTEGER
  iScsiParameterValue Unsigned32

IScsiTargetEntry  
SEQUENCE    
  iScsiGloballyUniqueName DisplayString
  iScsiTargetName DisplayString
  iScsiTargetComment DisplayString
  iScsiTargetLogicalUnitNumber Unsigned32
  iScsiTargetAuthEnabled INTEGER

IScsiLogicalUnitEntry  
SEQUENCE    
  iScsiLUEvs Unsigned32
  iScsiLUName DisplayString
  iScsiLUStatus INTEGER
  iScsiLUComment DisplayString
  iScsiLUDeviceId Unsigned32
  iScsiLUPath DisplayString
  iScsiLUInitialized INTEGER
  iScsiLUSize Counter64

IScsiTargetLogicalUnitEntry  
SEQUENCE    
  iScsiTargetLUTargetName DisplayString
  iScsiTargetLULogicalUnitName DisplayString
  iScsiTargetLun Integer32

ISNSEntry  
SEQUENCE    
  iSNSIpAddress IpAddress
  iSNSPort Unsigned32

IScsiStatisticsEntry  
SEQUENCE    
  iScsiStatisticsNodeId Unsigned32
  iScsiStatisticsName DisplayString
  iScsiStatisticsValue Counter64

AutoChangerEntry  
SEQUENCE    
  autoChangerIndex Integer32
  autoChangerDeviceName DisplayString
  autoChangerSerialNumber DisplayString
  autoChangerEVS DisplayString

TapeDriveEntry  
SEQUENCE    
  tapeDriveIndex Integer32
  tapeDriveAutoChangerIndex Integer32
  tapeDriveDeviceName DisplayString
  tapeDriveSerialNumber DisplayString
  tapeDriveLocation DisplayString
  tapeDriveEVS DisplayString

SystemUserEntry  
SEQUENCE    
  systemUserName DisplayString
  systemUserAccessLevel DisplayString

LicenseKeyEntry  
SEQUENCE    
  licenseKeyIndex Integer32
  licenseKeyString DisplayString
  licenseKeyValid INTEGER
  licenseCIFSService INTEGER
  licenseNFSService INTEGER
  licenseFTPService INTEGER
  licenseHTTPService INTEGER
  licenseFailoverService INTEGER
  licenseRAIDService INTEGER

LicenseEntry  
SEQUENCE    
  licenseIndex Integer32
  licenseKey DisplayString
  licenseService DisplayString

WebAccessRestrictedEntry  
SEQUENCE    
  webAccessRestrictedHost DisplayString

SictrlAccessRestrictedEntry  
SEQUENCE    
  sictrlAccessRestrictedHost DisplayString

TelnetAccessRestrictedEntry  
SEQUENCE    
  telnetAccessRestrictedHost DisplayString

SecureWebAccessRestrictedEntry  
SEQUENCE    
  secureWebAccessRestrictedHost DisplayString

EventLogEntry  
SEQUENCE    
  eventLogTimeStamp DisplayString
  eventLogHandle Integer32
  eventLogText DisplayString

SmtpRecipEntry  
SEQUENCE    
  smtpRecipIndex Integer32
  smtpRecipName DisplayString

SmtpUndisclosedRecipEntry  
SEQUENCE    
  smtpUndisclosedRecipIndex Integer32
  smtpUndisclosedRecipName DisplayString

SmtpRecipientEntry  
SEQUENCE    
  smtpRecipientIndex Integer32
  smtpRecipientName DisplayString
  smtpRecipientDisclose DisplayString
  smtpRecipientEmpty DisplayString

WinRecipEntry  
SEQUENCE    
  winRecipIndex Integer32
  winRecipName DisplayString

SnmpRecipEntry  
SEQUENCE    
  snmpRecipIndex Integer32
  snmpRecipName DisplayString

SnmpAccessRestrictedEntry  
SEQUENCE    
  snmpAccessRestrictedHost DisplayString

SnmpTrapHostEntry  
SEQUENCE    
  snmpTrapHostIndex Integer32
  snmpTrapHost DisplayString

VerModEntry  
SEQUENCE    
  verModIndex INTEGER
  verModLoader DisplayString
  verModKernel DisplayString
  verModHw DisplayString
  verModSerial Integer32
  verModBuildState Integer32
  verModUniq0 DisplayString
  verModUniq1 DisplayString
  verModFirstDate DisplayString
  verModMTDSLastFailure DisplayString
  verModMTDSFailures Integer32
  verModMTDSLastPass DisplayString
  verModMTDSPasses Integer32
  verModCardID Integer32
  verModCardRev Integer32
  verModGlueRev Integer32

CronJobEntry  
SEQUENCE    
  cronJobIndex Integer32
  cronJobDateSpec DisplayString
  cronJobCommandList DisplayString
  cronJobMailList DisplayString
  cronJobAccessLevel DisplayString

AtJobEntry  
SEQUENCE    
  atJobIndex Integer32
  atJobRunTime DisplayString
  atJobCommandList DisplayString
  atJobMailList DisplayString
  atJobAccessLevel DisplayString

HwFlowEntry  
SEQUENCE    
  hwFlowIndex INTEGER
  hwFlowDebug INTEGER
  hwFlowConsole INTEGER

Defined Values

blueArcServer 1.3.6.1.4.1.11096.6.1
The MIB module for monitoring a BlueArc Server.
MODULE-IDENTITY    

blueArc 1.3.6.1.4.1.11096
OBJECT IDENTIFIER    

blueArcPrivate 1.3.6.1.4.1.11096.6
OBJECT IDENTIFIER    

blueArcServerObjs 1.3.6.1.4.1.11096.6.1.1
OBJECT IDENTIFIER    

sys 1.3.6.1.4.1.11096.6.1.1.1
OBJECT IDENTIFIER    

powerUnits 1.3.6.1.4.1.11096.6.1.1.1.1
OBJECT IDENTIFIER    

server 1.3.6.1.4.1.11096.6.1.1.1.2
OBJECT IDENTIFIER    

environment 1.3.6.1.4.1.11096.6.1.1.1.2.1
OBJECT IDENTIFIER    

locale 1.3.6.1.4.1.11096.6.1.1.1.2.2
OBJECT IDENTIFIER    

failover 1.3.6.1.4.1.11096.6.1.1.1.2.3
OBJECT IDENTIFIER    

cache 1.3.6.1.4.1.11096.6.1.1.1.2.4
OBJECT IDENTIFIER    

sectorCache 1.3.6.1.4.1.11096.6.1.1.1.2.4.1
OBJECT IDENTIFIER    

fileSysCache 1.3.6.1.4.1.11096.6.1.1.1.2.4.2
OBJECT IDENTIFIER    

clustering 1.3.6.1.4.1.11096.6.1.1.1.2.5
OBJECT IDENTIFIER    

serialNumbers 1.3.6.1.4.1.11096.6.1.1.1.2.6
OBJECT IDENTIFIER    

storage 1.3.6.1.4.1.11096.6.1.1.1.3
OBJECT IDENTIFIER    

racks 1.3.6.1.4.1.11096.6.1.1.1.3.1
OBJECT IDENTIFIER    

raid 1.3.6.1.4.1.11096.6.1.1.1.3.2
OBJECT IDENTIFIER    

controllers 1.3.6.1.4.1.11096.6.1.1.1.3.2.1
OBJECT IDENTIFIER    

physicalDrives 1.3.6.1.4.1.11096.6.1.1.1.3.2.2
OBJECT IDENTIFIER    

enclosures 1.3.6.1.4.1.11096.6.1.1.1.3.2.3
OBJECT IDENTIFIER    

automount 1.3.6.1.4.1.11096.6.1.1.1.3.3
OBJECT IDENTIFIER    

systemDrives 1.3.6.1.4.1.11096.6.1.1.1.3.4
OBJECT IDENTIFIER    

volumes 1.3.6.1.4.1.11096.6.1.1.1.3.5
OBJECT IDENTIFIER    

fcStats 1.3.6.1.4.1.11096.6.1.1.1.3.6
OBJECT IDENTIFIER    

virtualVolumes 1.3.6.1.4.1.11096.6.1.1.1.3.7
OBJECT IDENTIFIER    

snapshot 1.3.6.1.4.1.11096.6.1.1.1.3.8
OBJECT IDENTIFIER    

nvramStats 1.3.6.1.4.1.11096.6.1.1.1.3.9
OBJECT IDENTIFIER    

network 1.3.6.1.4.1.11096.6.1.1.2
OBJECT IDENTIFIER    

etherStats 1.3.6.1.4.1.11096.6.1.1.2.1
OBJECT IDENTIFIER    

tcpipStats 1.3.6.1.4.1.11096.6.1.1.2.2
OBJECT IDENTIFIER    

udpStats 1.3.6.1.4.1.11096.6.1.1.2.3
OBJECT IDENTIFIER    

advipConfig 1.3.6.1.4.1.11096.6.1.1.2.4
OBJECT IDENTIFIER    

engipConfig 1.3.6.1.4.1.11096.6.1.1.2.5
OBJECT IDENTIFIER    

nameService 1.3.6.1.4.1.11096.6.1.1.2.6
OBJECT IDENTIFIER    

wins 1.3.6.1.4.1.11096.6.1.1.2.6.1
OBJECT IDENTIFIER    

dns 1.3.6.1.4.1.11096.6.1.1.2.6.2
OBJECT IDENTIFIER    

nsOrder 1.3.6.1.4.1.11096.6.1.1.2.6.3
OBJECT IDENTIFIER    

nis 1.3.6.1.4.1.11096.6.1.1.2.7
OBJECT IDENTIFIER    

fileProtocol 1.3.6.1.4.1.11096.6.1.1.3
OBJECT IDENTIFIER    

security 1.3.6.1.4.1.11096.6.1.1.3.1
OBJECT IDENTIFIER    

cifs 1.3.6.1.4.1.11096.6.1.1.3.2
OBJECT IDENTIFIER    

shares 1.3.6.1.4.1.11096.6.1.1.3.2.1
OBJECT IDENTIFIER    

shareAccess 1.3.6.1.4.1.11096.6.1.1.3.2.2
OBJECT IDENTIFIER    

cifsStats 1.3.6.1.4.1.11096.6.1.1.3.2.3
OBJECT IDENTIFIER    

cifsService 1.3.6.1.4.1.11096.6.1.1.3.2.4
OBJECT IDENTIFIER    

nfs 1.3.6.1.4.1.11096.6.1.1.3.3
OBJECT IDENTIFIER    

nfsExports 1.3.6.1.4.1.11096.6.1.1.3.3.1
OBJECT IDENTIFIER    

nfsUsers 1.3.6.1.4.1.11096.6.1.1.3.3.2
OBJECT IDENTIFIER    

nfsUserMapping 1.3.6.1.4.1.11096.6.1.1.3.3.3
OBJECT IDENTIFIER    

nfsGroups 1.3.6.1.4.1.11096.6.1.1.3.3.4
OBJECT IDENTIFIER    

nfsGroupMapping 1.3.6.1.4.1.11096.6.1.1.3.3.5
OBJECT IDENTIFIER    

nfsStats 1.3.6.1.4.1.11096.6.1.1.3.3.6
OBJECT IDENTIFIER    

nfsVersion2 1.3.6.1.4.1.11096.6.1.1.3.3.6.1
OBJECT IDENTIFIER    

nfsVersion3 1.3.6.1.4.1.11096.6.1.1.3.3.6.2
OBJECT IDENTIFIER    

nfsService 1.3.6.1.4.1.11096.6.1.1.3.3.7
OBJECT IDENTIFIER    

ftp 1.3.6.1.4.1.11096.6.1.1.3.4
OBJECT IDENTIFIER    

ftpMountPoints 1.3.6.1.4.1.11096.6.1.1.3.4.2
OBJECT IDENTIFIER    

ftpUsers 1.3.6.1.4.1.11096.6.1.1.3.4.3
OBJECT IDENTIFIER    

ftpLogging 1.3.6.1.4.1.11096.6.1.1.3.4.4
OBJECT IDENTIFIER    

ftpStats 1.3.6.1.4.1.11096.6.1.1.3.4.5
OBJECT IDENTIFIER    

ftpService 1.3.6.1.4.1.11096.6.1.1.3.4.6
OBJECT IDENTIFIER    

ftpSecurity 1.3.6.1.4.1.11096.6.1.1.3.4.7
OBJECT IDENTIFIER    

http 1.3.6.1.4.1.11096.6.1.1.3.5
OBJECT IDENTIFIER    

httpConfig 1.3.6.1.4.1.11096.6.1.1.3.5.1
OBJECT IDENTIFIER    

httpStats 1.3.6.1.4.1.11096.6.1.1.3.5.2
OBJECT IDENTIFIER    

httpService 1.3.6.1.4.1.11096.6.1.1.3.5.3
OBJECT IDENTIFIER    

iScsi 1.3.6.1.4.1.11096.6.1.1.3.6
OBJECT IDENTIFIER    

iScsiConfiguration 1.3.6.1.4.1.11096.6.1.1.3.6.1
OBJECT IDENTIFIER    

iScsiStatistics 1.3.6.1.4.1.11096.6.1.1.3.6.2
OBJECT IDENTIFIER    

backup 1.3.6.1.4.1.11096.6.1.1.4
OBJECT IDENTIFIER    

ndmpStatus 1.3.6.1.4.1.11096.6.1.1.4.1
OBJECT IDENTIFIER    

ndmpDevices 1.3.6.1.4.1.11096.6.1.1.4.2
OBJECT IDENTIFIER    

ndmpSnapshotOptions 1.3.6.1.4.1.11096.6.1.1.4.3
OBJECT IDENTIFIER    

mgmnt 1.3.6.1.4.1.11096.6.1.1.5
OBJECT IDENTIFIER    

systemUsers 1.3.6.1.4.1.11096.6.1.1.5.1
OBJECT IDENTIFIER    

license 1.3.6.1.4.1.11096.6.1.1.5.2
OBJECT IDENTIFIER    

access 1.3.6.1.4.1.11096.6.1.1.5.3
OBJECT IDENTIFIER    

web 1.3.6.1.4.1.11096.6.1.1.5.3.1
OBJECT IDENTIFIER    

sictrl 1.3.6.1.4.1.11096.6.1.1.5.3.2
OBJECT IDENTIFIER    

telnet 1.3.6.1.4.1.11096.6.1.1.5.3.3
OBJECT IDENTIFIER    

secureWeb 1.3.6.1.4.1.11096.6.1.1.5.3.4
OBJECT IDENTIFIER    

lcd 1.3.6.1.4.1.11096.6.1.1.5.3.5
OBJECT IDENTIFIER    

eventlog 1.3.6.1.4.1.11096.6.1.1.5.4
OBJECT IDENTIFIER    

alerts 1.3.6.1.4.1.11096.6.1.1.5.5
OBJECT IDENTIFIER    

mailAlertConfig 1.3.6.1.4.1.11096.6.1.1.5.5.1
OBJECT IDENTIFIER    

winAlertConfig 1.3.6.1.4.1.11096.6.1.1.5.5.2
OBJECT IDENTIFIER    

snmpAlertConfig 1.3.6.1.4.1.11096.6.1.1.5.5.3
OBJECT IDENTIFIER    

snmpAgent 1.3.6.1.4.1.11096.6.1.1.5.6
OBJECT IDENTIFIER    

versions 1.3.6.1.4.1.11096.6.1.1.5.7
OBJECT IDENTIFIER    

cron 1.3.6.1.4.1.11096.6.1.1.5.8
OBJECT IDENTIFIER    

mgmntStats 1.3.6.1.4.1.11096.6.1.1.5.9
OBJECT IDENTIFIER    

webMgmntStats 1.3.6.1.4.1.11096.6.1.1.5.9.1
OBJECT IDENTIFIER    

sictrlMgmntStats 1.3.6.1.4.1.11096.6.1.1.5.9.2
OBJECT IDENTIFIER    

telnetMgmntStats 1.3.6.1.4.1.11096.6.1.1.5.9.3
OBJECT IDENTIFIER    

secureWebMgmntStats 1.3.6.1.4.1.11096.6.1.1.5.9.4
OBJECT IDENTIFIER    

hwFlowControl 1.3.6.1.4.1.11096.6.1.1.5.10
OBJECT IDENTIFIER    

puConfigNumber 1.3.6.1.4.1.11096.6.1.1.1.1.1
The number of power units (regardless of their current state) which may be present on this system. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puConfigTable 1.3.6.1.4.1.11096.6.1.1.1.1.2
A table of configuration information relevant to each power unit which may be present on this system. The number of entries in this table is given by the value of puConfigNumber. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  SEQUENCE OF  
    PuConfigEntry

puConfigEntry 1.3.6.1.4.1.11096.6.1.1.1.1.2.1
Configuration information for a power unit which may be present on this system. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  PuConfigEntry  

puConfigIndex 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.1
A unique value for each power unit which may be present on this system. Its value ranges between 1 and the value of puConfigNumber. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32 1..2  

puConfigShutdownEnabled 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.2
Indicates whether the power unit is to control the shutdown of the system when a power outage is detected. enabled(1) - the power unit will control the shutdown. disabled(2) - the power unit will NOT control the shutdown. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

puConfigShutdownInterval 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.3
This variable is used in conjunction with puConfigShutdownRemainingLife such that when either condition is met a controlled shutdown will take place. puConfigShutdownInterval specifies the interval after which a controlled shutdown should take place in the event of a power outage. remainingLife(1) - indicates that the shutdown is based on the remaining battery life only and NOT the duration of the power outage. The variable puConfigShutdownRemainingLife determines how the shutdown is controlled. immediately(2) - the shutdown should take place as soon as the power outage is detected. The variable puConfigRemainingLife is irrelevant in this case. oneMinute(3), twoMinutes(4), threeMinutes(5), - the interval after which a controlled fiveMinutes(6), shutdown should take place in the event of tenMinutes(7) a power outage. NOTE: the variable puConfigShutdownEnabled must be enabled(1), for this variable to have any effect in determining when the controlled shutdown is performed. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER remainingLife(1), immediately(2), oneMinute(3), twoMinutes(4), threeMinutes(5), fiveMinutes(6), tenMinutes(7)  

puConfigShutdownRemainingLife 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.4
Specifies the number of minutes of battery life which when depleted will cause a controlled shutdown of the system. NOTE: the variable puConfigShutdownEnabled must be enabled(1), for this variable to have any effect in determining when the controlled shutdown is performed. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER fiveMinutes(5), tenMinutes(10)  

puConfigCommsOK 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.5
Indicates whether the system is currently communicating with the power unit. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER communicating(1), notCommunicating(2)  

puConfigCommsEverOK 1.3.6.1.4.1.11096.6.1.1.1.1.2.1.6
Indicates whether the system has ever communicated with the power unit. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER communicated(1), neverCommunicated(2)  

puConfigurationCount 1.3.6.1.4.1.11096.6.1.1.1.1.7
The number of power units (regardless of their current state) which may be present on this system.
OBJECT-TYPE    
  Integer32  

puConfigurationTable 1.3.6.1.4.1.11096.6.1.1.1.1.8
A table of configuration information relevant to each power unit which may be present on this system. The number of entries in this table is given by the value of puConfigurationCount.
OBJECT-TYPE    
  SEQUENCE OF  
    PuConfigurationEntry

puConfigurationEntry 1.3.6.1.4.1.11096.6.1.1.1.1.8.1
Configuration information for a power unit which may be present on this system.
OBJECT-TYPE    
  PuConfigurationEntry  

puConfigurationIndex 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.1
An IP address for each power unit which may be present on this system. 0.0.0.0 is given for a serial-attached UPS.
OBJECT-TYPE    
  IpAddress  

puConfigurationUserName 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.2
The UPS management card's admin user name, used with the authentication phrase for authenticating status updates from the UPS. Empty if authentication is disabled.
OBJECT-TYPE    
  DisplayString  

puConfigurationMonitoringEnabled 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.3
Indicates whether monitoring is enabled on the UPS. If monitoring is enabled, then the power unit is to control the shutdown of the system when a power outage is detected.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), unknown(3)  

puConfigurationShutdownOnBattery 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.4
If the value is not -1, then the system will be shut down after running on battery for the specified time in minutes.
OBJECT-TYPE    
  Integer32  

puConfigurationShutdownOnRuntime 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.5
If the value is not -1, then shutdown will occur when the estimated remaining runtime falls below the specified value in minutes.
OBJECT-TYPE    
  Integer32  

puConfigurationShutdownOnLowBattery 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.6
If the value is not -1, then the system will shut down when UPS reports a low battery, with a delay of the specified number of minutes.
OBJECT-TYPE    
  Integer32  

puConfigurationOnBatteryTolerance 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.7
The length of time, in seconds, for which the UPS must be on battery before the system will act on it, no matter what the shutdown settings are.
OBJECT-TYPE    
  Integer32  

puConfigurationCommsOK 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.8
Indicates whether the system is currently communicating with the power unit.
OBJECT-TYPE    
  INTEGER communicating(1), notCommunicating(2), unknown(3)  

puConfigurationCommsEverOK 1.3.6.1.4.1.11096.6.1.1.1.1.8.1.9
Indicates whether the system has ever communicated with the power unit.
OBJECT-TYPE    
  INTEGER communicated(1), neverCommunicated(2), unknown(3)  

puStatusNumber 1.3.6.1.4.1.11096.6.1.1.1.1.3
The number of power units from which status information can be gathered. Status information is only available for power units that the system is able to communicate with. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatusTable 1.3.6.1.4.1.11096.6.1.1.1.1.4
A table containing the status of each power unit the system is communicating with. The number of entries in this table is given by the value of puStatusNumber. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  SEQUENCE OF  
    PuStatusEntry

puStatusEntry 1.3.6.1.4.1.11096.6.1.1.1.1.4.1
Status information for each power unit the system is communicating with. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  PuStatusEntry  

puStatusIndex 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.1
The power unit from which the status information has been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigIndex. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32 1..2  

puStatusModel 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.2
The model of the power unit as declared by the manufacturer. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  DisplayString  

puStatusSerialNumber 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.3
The serial number of the power unit as declared by the manufacturer. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  DisplayString  

puStatusManufactureDate 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.4
The date of manufacture of the power unit as declared by the manufacturer in their chosen format. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  DisplayString  

puStatusBatteryReplaceDate 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.5
The last date a battery was replaced within this the power unit in manufacturers format. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  DisplayString  

puStatusUpperTransferVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.6
The upper battery transfer voltage in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatusLowerTransferVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.7
The lower battery transfer voltage in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatusSensitivity 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.8
The sensitivity of the power unit. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER high(1), medium(2), low(3), automatic(4), unknown(5)  

puStatusLowBatteryInterval 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.9
The length of time between the power unit warning of a low battery and turning off in minutes. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatusAlarmSetting 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.10
The audible alarm setting for the power unit. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER immediately(1), delayedUtilityFailure(2), lowBatteryOnly(3), never(4), unknown(5)  

puStatusCalibrating 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.11
Indicates whether the power unit is calibrating or not. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER calibrating(1), notCalibrating(2)  

puStatusSleeping 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.12
Indicates whether the power unit is sleeping or not. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER sleeping(1), notSleeping(2)  

puStatusOnline 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.13
Indicates whether the power unit is on or off line. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

puStatusOnBattery 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.14
Indicates whether the power unit is operating on the battery or mains. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER onBattery(1), onMains(2)  

puStatusBatteryAlmostUsedUp 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.15
Indicates whether the power units battery is almost used up. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER batteryAlmostUsedUp(1), batteryOK(2)  

puStatusChangeBattery 1.3.6.1.4.1.11096.6.1.1.1.1.4.1.16
Indicates whether the power units battery should be changed. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER changeBattery(1), batteryOK(2)  

puCurrentStatusCount 1.3.6.1.4.1.11096.6.1.1.1.1.9
The number of power units from which status information can be gathered. Status information is only available for power units that the system is able to communicate with.
OBJECT-TYPE    
  Integer32  

puCurrentStatusTable 1.3.6.1.4.1.11096.6.1.1.1.1.10
A table containing the status of each power unit the system is communicating with. The number of entries in this table is given by the value of puCurrentStatusCount.
OBJECT-TYPE    
  SEQUENCE OF  
    PuCurrentStatusEntry

puCurrentStatusEntry 1.3.6.1.4.1.11096.6.1.1.1.1.10.1
Status information for each power unit the system is communicating with.
OBJECT-TYPE    
  PuCurrentStatusEntry  

puCurrentStatusIndex 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.1
The power unit from which the status information has been gathered. The power unit identified by a particular IP address is the same power unit as identified by the same value of puConfigurationIndex.
OBJECT-TYPE    
  IpAddress  

puCurrentStatusModel 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.2
The model of the power unit as declared by the manufacturer.
OBJECT-TYPE    
  DisplayString  

puCurrentStatusSerialNumber 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.3
The serial number of the power unit as declared by the manufacturer.
OBJECT-TYPE    
  DisplayString  

puCurrentStatusManufactureDate 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.4
The date of manufacture of the power unit as declared by the manufacturer in their chosen format.
OBJECT-TYPE    
  DisplayString  

puCurrentStatusBatteryReplacedDate 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.5
The last date a battery was replaced within this the power unit in manufacturers format.
OBJECT-TYPE    
  DisplayString  

puCurrentStatusUpperTransferVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.6
The upper battery transfer voltage in Volts.
OBJECT-TYPE    
  Integer32  

puCurrentStatusLowerTransferVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.7
The lower battery transfer voltage in Volts.
OBJECT-TYPE    
  Integer32  

puCurrentStatusSensitivity 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.8
The sensitivity of the power unit.
OBJECT-TYPE    
  INTEGER high(1), medium(2), low(3), automatic(4), unknown(5)  

puCurrentStatusLowBatteryInterval 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.9
The length of time between the power unit warning of a low battery and turning off in minutes.
OBJECT-TYPE    
  Integer32  

puCurrentStatusAlarmSetting 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.10
The audible alarm setting for the power unit.
OBJECT-TYPE    
  INTEGER immediately(1), delayedUtilityFailure(2), lowBatteryOnly(3), never(4), unknown(5)  

puCurrentStatusCalibrating 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.11
Indicates whether the power unit is calibrating or not.
OBJECT-TYPE    
  INTEGER notDefined(0), calibrating(1), notCalibrating(2)  

puCurrentStatusSleeping 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.12
Indicates whether the power unit is sleeping or not. This object is only applicable to a Symmetra UPS; in all other cases, it will be notDefined(1).
OBJECT-TYPE    
  INTEGER notDefined(0), sleeping(1), notSleeping(2)  

puCurrentStatusSmartTrim 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.13
Indicates whether SmartTrim is enabled or not. This object is not applicable to a Symmetra UPS; in this case, it will be notDefined(1).
OBJECT-TYPE    
  INTEGER notDefined(0), notEnabled(1), enabled(2)  

puCurrentStatusSmartBoost 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.14
Indicates whether SmartBoost is enabled or not.
OBJECT-TYPE    
  INTEGER notDefined(0), notEnabled(1), enabled(2)  

puCurrentStatusOnline 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.15
Indicates whether the power unit is on or off line.
OBJECT-TYPE    
  INTEGER notDefined(0), online(1), offline(2)  

puCurrentStatusOnBattery 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.16
Indicates whether the power unit is operating on the battery or mains.
OBJECT-TYPE    
  INTEGER notDefined(0), onBattery(1), onMains(2)  

puCurrentStatusOverload 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.17
Indicates whether the UPS is overloaded.
OBJECT-TYPE    
  INTEGER notDefined(0), notEnabled(1), enabled(2)  

puCurrentStatusBatteryAlmostUsedUp 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.18
Indicates whether the power units battery is almost used up.
OBJECT-TYPE    
  INTEGER notDefined(0), batteryAlmostUsedUp(1), batteryOK(2)  

puCurrentStatusChangeBattery 1.3.6.1.4.1.11096.6.1.1.1.1.10.1.19
Indicates whether the power units battery should be changed.
OBJECT-TYPE    
  INTEGER notDefined(0), changeBattery(1), batteryOK(2)  

puStatsNumber 1.3.6.1.4.1.11096.6.1.1.1.1.5
The number of power units from which statistics can be gathered. Statistics are only available for power units that the system is able to communicate with. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsTable 1.3.6.1.4.1.11096.6.1.1.1.1.6
A table containing statistics for each power unit the system is communicating with. The number of entries in this table is given by the value of puStatsNumber. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  SEQUENCE OF  
    PuStatsEntry

puStatsEntry 1.3.6.1.4.1.11096.6.1.1.1.1.6.1
Statistics for each power unit the system is communicating with. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  PuStatsEntry  

puStatsIndex 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.1
The power unit from which the statistics have been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigurationIndex. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32 1..2  

puStatsBatteryCharge 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.2
The percentage by which the battery is charged. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER 0..100  

puStatsLoad 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.3
The percentage of the rated load in Watts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  INTEGER 0..100  

puStatsFrequency 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.4
The frequency of the AC mains in Hertz. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsLineVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.5
The AC mains voltage entering the power unit in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsOutputVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.6
The output voltage of the power unit in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsBatteryVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.7
The battery voltage in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsTemperatureC 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.8
The temperature inside the power unit in degrees Celsius. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsTemperatureF 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.9
The temperature inside the power unit in degrees Fahrenheit. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsLineMininumVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.10
The minimum line voltage in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsLineMaximumVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.11
The maximum line voltage in Volts. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatsRemainingRunTime 1.3.6.1.4.1.11096.6.1.1.1.1.6.1.12
The remaining runtime of the battery based on the obsolete load in minutes. This object is obsolete. Power units must be indexed by IP address.
OBJECT-TYPE    
  Integer32  

puStatisticsCount 1.3.6.1.4.1.11096.6.1.1.1.1.11
The number of power units from which statistics can be gathered. Statistics are only available for power units that the system is able to communicate with.
OBJECT-TYPE    
  Integer32  

puStatisticsTable 1.3.6.1.4.1.11096.6.1.1.1.1.12
A table containing statistics for each power unit the system is communicating with. The number of entries in this table is given by the value of puStatisticsCount.
OBJECT-TYPE    
  SEQUENCE OF  
    PuStatisticsEntry

puStatisticsEntry 1.3.6.1.4.1.11096.6.1.1.1.1.12.1
Statistics for each power unit the system is communicating with.
OBJECT-TYPE    
  PuStatisticsEntry  

puStatisticsIndex 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.1
The power unit from which the statistics have been gathered. The power unit identified by a particular value of this index is the same power unit as identified by the same value of puConfigurationIndex.
OBJECT-TYPE    
  Integer32 1..2  

puStatisticsBatteryCharge 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.2
The percentage by which the battery is charged.
OBJECT-TYPE    
  INTEGER 0..100  

puStatisticsLoad 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.3
The percentage of the rated load in Watts.
OBJECT-TYPE    
  INTEGER 0..100  

puStatisticsFrequency 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.4
The frequency of the AC mains in Hertz.
OBJECT-TYPE    
  Integer32  

puStatisticsLineVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.5
The AC mains voltage entering the power unit in Volts.
OBJECT-TYPE    
  Integer32  

puStatisticsOutputVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.6
The output voltage of the power unit in Volts.
OBJECT-TYPE    
  Integer32  

puStatisticsBatteryVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.7
The battery voltage in Volts.
OBJECT-TYPE    
  Integer32  

puStatisticsTemperatureC 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.8
The temperature inside the power unit in degrees Celsius.
OBJECT-TYPE    
  Integer32  

puStatisticsTemperatureF 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.9
The temperature inside the power unit in degrees Fahrenheit.
OBJECT-TYPE    
  Integer32  

puStatisticsLineMininumVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.10
The minimum line voltage in Volts.
OBJECT-TYPE    
  Integer32  

puStatisticsLineMaximumVoltage 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.11
The maximum line voltage in Volts.
OBJECT-TYPE    
  Integer32  

puStatisticsRemainingRunTime 1.3.6.1.4.1.11096.6.1.1.1.1.12.1.12
The remaining runtime of the battery based on the obsolete load in minutes.
OBJECT-TYPE    
  Integer32  

sensorNumber 1.3.6.1.4.1.11096.6.1.1.1.2.1.1
The number of sensors (regardless of their current state) which are present within silicon server unit.
OBJECT-TYPE    
  Integer32  

sensorTable 1.3.6.1.4.1.11096.6.1.1.1.2.1.2
A table containing information gathered by sensors located within the silicon server unit. Each sensor takes a measurement of both fan speed and temperature. The number of entries in this table is given by the value of sensorNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    SensorEntry

sensorEntry 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1
Information collected from each sensor located within the silicon server unit.
OBJECT-TYPE    
  SensorEntry  

sensorIndex 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.1
A unique value for each sensor within the silicon server unit. Its value ranges between 1 and the value of sensorNumber.
OBJECT-TYPE    
  Integer32 1..3  

sensorSpeedStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.2
Indicates whether the speed measurement is within the expected range. ok(1) - the reading is within the expected range. warning(2) - the reading is outside of the expected range, but not severe. severe(3) - the sensor unit should be replaced. failed(4) - the sensor unit has failed. The measured speed is invalid. unknown(5) - the speed status could not be determined.
OBJECT-TYPE    
  INTEGER ok(1), warning(2), severe(3), failed(4)  

sensorSpeedReading 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.3
A measurement of the fan speed taken by the sensor in rpm.
OBJECT-TYPE    
  Unsigned32  

sensorTempStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.4
Indicates whether the temperature measurement is within the expected range. ok(1) - the reading is within the expected range. warning(2) - the reading is outside of the expected range, but not severe. severe(3) - the sensor unit should be replaced. failed(4) - the sensor unit has failed. The measured temperature is invalid.
OBJECT-TYPE    
  INTEGER ok(1), warning(2), severe(3), failed(4)  

sensorTempCReading 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.5
A measurement of the temperature taken by the sensor in degrees Celsius.
OBJECT-TYPE    
  Integer32  

sensorTempFReading 1.3.6.1.4.1.11096.6.1.1.1.2.1.2.1.6
A measurement of the temperature taken by the sensor in degrees Fahrenheit.
OBJECT-TYPE    
  Integer32  

psuOneStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.3
The status of power supply unit 1 within the silicon server.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

psuTwoStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.4
The status of power supply unit 2 within the silicon server.
OBJECT-TYPE    
  INTEGER ok(1), failed(2)  

opsPerSecond 1.3.6.1.4.1.11096.6.1.1.1.2.1.5
The number of operations per second.
OBJECT-TYPE    
  Unsigned32  

fileSystemLoadClient 1.3.6.1.4.1.11096.6.1.1.1.2.1.6
The percentage of maximum load on file system resources due to client usage, averaged over the last 10 seconds. This represents the load on FSA.
OBJECT-TYPE    
  Integer32  

fileSystemLoadSystem 1.3.6.1.4.1.11096.6.1.1.1.2.1.7
The percentage of maximum load on file system resources due to system usage, averaged over the last 10 seconds. This represents the load on FSB.
OBJECT-TYPE    
  Integer32  

temperatureSensorNumber 1.3.6.1.4.1.11096.6.1.1.1.2.1.8
The number of temperature sensors (regardless of their current state) present in all silicon server units in the cluster.
OBJECT-TYPE    
  Integer32  

temperatureSensorTable 1.3.6.1.4.1.11096.6.1.1.1.2.1.9
A table containing information gathered by temperature sensors located in all silicon server units in the cluster. The number of entries in this table is given by the value of temperatureSensorNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    TemperatureSensorEntry

temperatureSensorEntry 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1
Information collected from each temperature sensor located in the silicon server unit.
OBJECT-TYPE    
  TemperatureSensorEntry  

temperatureSensorClusterNode 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.1
The ID of the Cluster Node in which the fan is located.
OBJECT-TYPE    
  Integer32 1..255  

temperatureSensorIndex 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.2
A unique value for each temperature sensor on a cluster node.
OBJECT-TYPE    
  Integer32 1..255  

temperatureSensorStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.3
Indicates whether the temperature measurement is within the expected range. ok(1) - the reading is within the expected range. tempWarning(2) - the reading is outside of the expected range, but not severe. tempSevere(3) - The reading is severely outside the expected range. tempSensoreFailed(4) - the sensor unit has failed. The measured temperature is invalid tempSensorWarning(5) - the sensor unit is in a warning condition. unknown(6) - the status of the sensor could not be determined.
OBJECT-TYPE    
  INTEGER ok(1), tempWarning(2), tempSevere(3), tempSensorFailed(4), tempSensorWarning(5), unknown(6)  

temperatureSensorCReading 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.4
A measurement of the temperature taken by the sensor in degrees Celsius.
OBJECT-TYPE    
  Integer32  

temperatureSensorFReading 1.3.6.1.4.1.11096.6.1.1.1.2.1.9.1.5
A measurement of the temperature taken by the sensor in degrees Fahrenheit.
OBJECT-TYPE    
  Integer32  

fanNumber 1.3.6.1.4.1.11096.6.1.1.1.2.1.10
The number of fans (regardless of their current state) present in all silicon server units in the cluster.
OBJECT-TYPE    
  Integer32  

fanTable 1.3.6.1.4.1.11096.6.1.1.1.2.1.11
A table containing information about the fans located in all silicon server units in the cluster.
OBJECT-TYPE    
  SEQUENCE OF  
    FanEntry

fanEntry 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1
Information about each fan located in all silicon server units in the cluster.
OBJECT-TYPE    
  FanEntry  

fanClusterNode 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.1
The ID of the Cluster Node in which the fan is located.
OBJECT-TYPE    
  Integer32 1..255  

fanIndex 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.2
A unique value for each fan on a cluster node.
OBJECT-TYPE    
  Integer32 1..255  

fanFittedStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.3
Indicates the 'fitted' status of the fan. ok(1) - the fan is fitted correctly. okIdWrong(2) - the fan is fitted correctly, but the ID is wrong. notFitted(3) - the fan is not fitted. unknown(4) - the status could not be determined.
OBJECT-TYPE    
  INTEGER ok(1), okIdWrong(2), notFitted(3), unknown(4)  

fanSpeedStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.4
Indicates the 'speed' status of the fan. ok(1) - the fan speed is ok. warning(2) - the fan speed is at a warning level. severe(3) - the fan speed is at a severe level. unknown(4) - the fan speed status could not be determined.
OBJECT-TYPE    
  INTEGER ok(1), warning(2), severe(3), unknown(4)  

fanSpeed 1.3.6.1.4.1.11096.6.1.1.1.2.1.11.1.5
The speed of the fan.
OBJECT-TYPE    
  Integer32  

psuNumber 1.3.6.1.4.1.11096.6.1.1.1.2.1.12
The number of psus (regardless of their current state) present in all silicon server units in the cluster.
OBJECT-TYPE    
  Integer32  

psuTable 1.3.6.1.4.1.11096.6.1.1.1.2.1.13
A table containing information about the psus located in the silicon server unit.
OBJECT-TYPE    
  SEQUENCE OF  
    PsuEntry

psuEntry 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1
Information about each psu.
OBJECT-TYPE    
  PsuEntry  

psuClusterNode 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.1
The ID of the Cluster Node in which the psu is located.
OBJECT-TYPE    
  Integer32 1..255  

psuIndex 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.2
A unique value for each psu on a cluster node.
OBJECT-TYPE    
  Integer32 1..255  

psuStatus 1.3.6.1.4.1.11096.6.1.1.1.2.1.13.1.3
Indicates the status of the psu. ok(1) - the psu is ok. failed(2) - the psu has failed. notFitted(3) - the psu is not fitted. unknown(4) - the status could not be determined.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), notFitted(3), unknown(4)  

serverDate 1.3.6.1.4.1.11096.6.1.1.1.2.2.1
The local date reported by the server in the form YYYY-MM-DD Where YYYY is the year. MM is the number of the month (01-12). DD is the day of the month.
OBJECT-TYPE    
  DisplayString  

serverTime 1.3.6.1.4.1.11096.6.1.1.1.2.2.2
The local time reported by the server in the form HH:MM:SS (UTC+/-hh:mm) Where HH is the hour (using 24 hour clock). MM is the minute. SS is the second. The remainder of the date indicates the number of hours (hh) and minutes (mm) east of UTC the local time has been adjusted by. NOTE: a negative value for the UTC offset indicates a time zone which is west of UTC.
OBJECT-TYPE    
  DisplayString  

utcOffset 1.3.6.1.4.1.11096.6.1.1.1.2.2.3
The local time zone offset setting for the server expressed as a number of minutes. NOTE: a negative value indicates a time zone west of UTC.
OBJECT-TYPE    
  Integer32  

daylightSavings 1.3.6.1.4.1.11096.6.1.1.1.2.2.4
Indicates whether daylight savings are in effect.
OBJECT-TYPE    
  INTEGER daylightSavings(1), noDaylightSavings(2), unknown(3)  

ntpServerNumber 1.3.6.1.4.1.11096.6.1.1.1.2.2.5
The number of NTP servers which have been configured to assist in synchronization of this silicon servers time.
OBJECT-TYPE    
  Integer32  

ntpServerTable 1.3.6.1.4.1.11096.6.1.1.1.2.2.6
A table containing information about each NTP server. The number of entries in this table is given by the value of ntpServerNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    NtpServerEntry

ntpServerEntry 1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1
Information about each configured NTP server.
OBJECT-TYPE    
  NtpServerEntry  

ntpServerHost 1.3.6.1.4.1.11096.6.1.1.1.2.2.6.1.1
The hostname or IP address of the NTP server.
OBJECT-TYPE    
  DisplayString  

failoverConfigStatus 1.3.6.1.4.1.11096.6.1.1.1.2.3.1
Indicates whether failover is configured for the silicon server. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  INTEGER configured(1), notConfigured(2)  

failoverPrimaryName 1.3.6.1.4.1.11096.6.1.1.1.2.3.2
The primary management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  DisplayString  

failoverSystemName 1.3.6.1.4.1.11096.6.1.1.1.2.3.3
The system management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  DisplayString  

failoverSecondaryName 1.3.6.1.4.1.11096.6.1.1.1.2.3.4
The secondary management name or a zero length string if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  DisplayString  

failoverPrimaryIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.3.5
The primary IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  IpAddress  

failoverSystemIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.3.6
The system IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  IpAddress  

failoverSecondaryIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.3.7
The secondary IP address or 0.0.0.0 if failover is not configured for this system. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  IpAddress  

failoverPrimaryStatus 1.3.6.1.4.1.11096.6.1.1.1.2.3.8
The status of the primary. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  INTEGER notConfigured(1), master(2), standby(3), notDetected(4), unknown(5)  

failoverSecondaryStatus 1.3.6.1.4.1.11096.6.1.1.1.2.3.9
The status of the secondary. This object is obsolete. Failover has been replaced by clustering.
OBJECT-TYPE    
  INTEGER notConfigured(1), master(2), standby(3), notDetected(4), unknown(5)  

sectorCacheMode 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.1
The mode the disk sector cache is currently operating in.
OBJECT-TYPE    
  INTEGER ramdisk(1), writeThrough(2), writeBack(3), disabled(4), unknown(5)  

sectorCacheDirtyPageWtmk 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.2
The current setting of the percentage dirty page watermark which is used in determining when to flush the disk sector cache. This object is now obsolete.
OBJECT-TYPE    
  INTEGER 0..99  

sectorCacheDirtyPageTimeout 1.3.6.1.4.1.11096.6.1.1.1.2.4.1.3
The current setting of the percentage dirty page timeout (specified in seconds) which is used in determining when to flush the disk sector cache.
OBJECT-TYPE    
  INTEGER 0..655  

fileSysCacheMode 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.1
The mode the file system cache is currently operating in. This object is obsolete.
OBJECT-TYPE    
  INTEGER writeThrough(1), writeBack(2)  

fileSysTransactionLogging 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.2
Indicates whether file system transaction logging is enabled or not. This object is obsolete.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

fileSysCacheTimeout 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.3
The file system cache timeout in seconds. This object is obsolete.
OBJECT-TYPE    
  INTEGER 1..655  

fileSysUpdateLastAccess 1.3.6.1.4.1.11096.6.1.1.1.2.4.2.4
Indicates whether the file system should update the last access time(s) on files or not.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

clusterName 1.3.6.1.4.1.11096.6.1.1.1.2.5.1
The cluster management name.
OBJECT-TYPE    
  DisplayString  

clusterUuid 1.3.6.1.4.1.11096.6.1.1.1.2.5.2
A unique identification number for the cluster.
OBJECT-TYPE    
  DisplayString  

clusterConfig 1.3.6.1.4.1.11096.6.1.1.1.2.5.3
The configuration of the cluster: 1 - single standalone node 2 - active / standby pair 3 - active / active cluster 4 - the configuration could not be determined.
OBJECT-TYPE    
  INTEGER singleNode(1), activeStandby(2), activeActive(3), unknown(4)  

clusterQuorumDeviceName 1.3.6.1.4.1.11096.6.1.1.1.2.5.4
The quorum device management name.
OBJECT-TYPE    
  DisplayString  

clusterQuorumDeviceIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.5.5
The quorum device IP address, or 0.0.0.0 if no quorum device is present.
OBJECT-TYPE    
  IpAddress  

clusterQuorumDeviceOwnedByPNode 1.3.6.1.4.1.11096.6.1.1.1.2.5.6
The identification number of the physical node which owns this quorum device. A value of -1 indicates that this cannot be determined.
OBJECT-TYPE    
  Integer32  

clusterQuorumDeviceStatus 1.3.6.1.4.1.11096.6.1.1.1.2.5.7
The status of the quorum device: 0 - unknown 1 - unconfigured 2 - off line 3 - owned 4 - configured 5 - granted 6 - cluster node being queried is not up 7 - quorum device does not have the correct UUID for the cluster
OBJECT-TYPE    
  INTEGER unknown(0), unconfigured(1), offLine(2), owned(3), configured(4), granted(5), clusterNodeNotUp(6), misconfigured(7)  

clusterPNodeNumber 1.3.6.1.4.1.11096.6.1.1.1.2.5.8
The number of physical nodes in the cluster. A value of -1 indicates that this cannot be determined. This object is now obsolete, and has been replaced with clusterNodeNumber.
OBJECT-TYPE    
  Integer32  

clusterPNodeTable 1.3.6.1.4.1.11096.6.1.1.1.2.5.9
Information about each physical node in the cluster. The number of entries in this table is given by clusterPNodeNumber. This object is now obsolete, and has been replaced with clusterNodeTable.
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterPNodeEntry

clusterPNodeEntry 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1
Information about each physical node. This object is now obsolete, and has been replaced with clusterNodeEntry.
OBJECT-TYPE    
  ClusterPNodeEntry  

clusterPNodeId 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.1
The identification number of the physical node. A value of -1 indicates that this cannot be determined. This object is now obsolete, and has been replaced with clusterNodeId.
OBJECT-TYPE    
  Integer32 0..255  

clusterPNodeName 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.2
The management name of the physical node. This object is now obsolete, and has been replaced with clusterNodeName.
OBJECT-TYPE    
  DisplayString  

clusterPNodeIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.3
The IP address of the physical node. A value of 0.0.0.0 indicates that this cannot be determined. This object is now obsolete, and has been replaced with clusterNodeIpAddr.
OBJECT-TYPE    
  IpAddress  

clusterPNodeStatus 1.3.6.1.4.1.11096.6.1.1.1.2.5.9.1.4
The status of the physical node: 1 - unknown 2 - up 3 - not up 4 - on line 5 - dead 6 - dormant This object is now obsolete, and has been replaced with clusterNodeStatus.
OBJECT-TYPE    
  INTEGER unknown(1), up(2), notUp(3), onLine(4), dead(5), dormant(6)  

clusterVNodeNumber 1.3.6.1.4.1.11096.6.1.1.1.2.5.10
The number of virtual nodes in the cluster. A value of -1 indicates that this cannot be determined.
OBJECT-TYPE    
  Integer32  

clusterVNodeTable 1.3.6.1.4.1.11096.6.1.1.1.2.5.11
Information about each virtual node in the cluster. The number of entries in this table is given by clusterVNodeNumber
OBJECT-TYPE    
  SEQUENCE OF  
    ClusterVNodeEntry

clusterVNodeEntry 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1
Information about each virtual node in the cluster.
OBJECT-TYPE    
  ClusterVNodeEntry  

clusterVNodeId 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.1
The identification number of the virtual node. A value of -1 indicates that this cannot be determined.
OBJECT-TYPE    
  Integer32 0..255  

clusterVNodeName 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.2
The management name of the virtual node.
OBJECT-TYPE    
  DisplayString  

clusterVNodeIpAddr 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.3
The IP address of the virtual node. A value of 0.0.0.0 indicates that this cannot be determined.
OBJECT-TYPE    
  IpAddress  

clusterVNodeStatus 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.4
The status of the virtual node: 1 - unknown 2 - on line 3 - off line
OBJECT-TYPE    
  INTEGER unknown(1), onLine(2), offLine(3)  

clusterVNodeAdmin 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.5
Whether the virtual node is the administrative virtual node: 0 - a service node (i.e. not the administrative virtual node) 1 - the administrative virtual node 2 - cannot be determined
OBJECT-TYPE    
  INTEGER false(0), true(1), unknown(2)  

clusterVNodeHostedBy 1.3.6.1.4.1.11096.6.1.1.1.2.5.11.1.6
The identification number of the physical node hosting this virtual node. A value of -1 indicates that this cannot be determined.
OBJECT-TYPE    
  Integer32  

serialNumberTable 1.3.6.1.4.1.11096.6.1.1.1.2.6.1
Serial numbers for server components.
OBJECT-TYPE    
  SEQUENCE OF  
    SerialNumberEntry

serialNumberEntry 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1
Serial number for a component.
OBJECT-TYPE    
  SerialNumberEntry  

componentType 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.1
The type of component: 1 - a chassis 2 - a blade, such as NIM2 3 - a power supply unit
OBJECT-TYPE    
  INTEGER chassis(1), blade(2), psu(3)  

subComponentType 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.2
The sub-type of component.
OBJECT-TYPE    
  INTEGER unknown(0), nim1(1), nim2(2), nim3(3), fsa17455(4), fsa1(5), fsa2(6), fsx1(7), fsb1(8), fsb2(9), sim1(10), sim2(11), chassis(12), psu1(13), psu2(14), fsb3(15), sim3(16), mcp1(17), mmb1(18), mfb1(19)  

clusterNode 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.3
The identification number of the cluster node hosting this component. A value of -1 indicates that this cannot be determined.
OBJECT-TYPE    
  Integer32 0..255  

serialNumber 1.3.6.1.4.1.11096.6.1.1.1.2.6.1.1.4
The serial number of the component.
OBJECT-TYPE    
  DisplayString  

rackNumber 1.3.6.1.4.1.11096.6.1.1.1.3.1.1
The number of racks (regardless of their current state) which are present in this system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

rackTable 1.3.6.1.4.1.11096.6.1.1.1.3.1.2
A table containing information about each rack in this system. The number of entries in this table is given by the value of rackNumber. This table is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    RackEntry

rackEntry 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1
Status information about each rack in the system. This table is now obsolete.
OBJECT-TYPE    
  RackEntry  

rackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.1
A unique value for each rack present in this system. Its value ranges between 1 and the value of rackNumber. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

rackStatus 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.2
Indicates the status of the rack. ok(1) - the RAID monitoring software is communicating with the rack. storageFailed(2) - the RAID controller associated with this rack has failed. loopFailed(3) - the fibre channel loop has failed. otherFailure(4) - the system is unable to communicate with the rack, it may be booting. This object is now obsolete.
OBJECT-TYPE    
  INTEGER ok(1), storageFailed(2), loopFailed(3), otherFailure(4)  

rackNumberOfEnclosures 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.3
The number of storage enclosures which are normally accessible by this rack. NOTE: If rackStatus is not ok, the value of this variable will be 0. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

rackNumberOfPhysicalDrives 1.3.6.1.4.1.11096.6.1.1.1.3.1.2.1.4
The number of physical drives which are normally accessible by this rack. NOTE: If rackStatus is not ok, the value of this variable will be 0. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1
A table containing general information about RAID controller(s) present in each rack within the system. A rack may contain dual controllers for redundancy purposes. This (if present) will be indicated by the secondaryStatus field. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This table is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    RaidControllerEntry

raidControllerEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1
General information about the RAID controller(s) in a rack. This table is now obsolete.
OBJECT-TYPE    
  RaidControllerEntry  

raidControllerRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.1
The rack in which the RAID controller(s) are located. The controller(s) identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

raidControllerWWN 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.2
The world wide name identifying the RAID controller(s). NOTE: If the world wide name cannot be obtained this value will be a zero length string. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

raidControllerPrimaryStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.3
The status of primary RAID controller. This object is now obsolete.
OBJECT-TYPE    
  INTEGER online(1), failed(2), notPresent(3), unknown(4), inserted(5), offline(6)  

raidControllerSecondaryStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.4
The status of secondary RAID controller. NOTE: A status of notPresent(3) indicates that there is only one RAID controller within this rack. This object is now obsolete.
OBJECT-TYPE    
  INTEGER online(1), failed(2), notPresent(3), unknown(4)  

raidControllerManufacturer 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.5
The manufacturer of the RAID controller(s). NOTE: If the manufacturer cannot be obtained this value will be a zero length string. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

raidControllerModel 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.6
The model of the RAID controller(s). NOTE: If the model cannot be obtained this value will be a zero length string. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

raidControllerCacheSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.1.1.7
The size of the RAID controller(s) cache in bytes. NOTE: If the cache size cannot be obtained this value will be a 0. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2
A table containing configuration information about the RAID controller present in each rack within the system. This information is the same for a RAID controller which has redundancy. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    RaidControllerConfigEntry

raidControllerConfigEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1
Configuration information about the RAID controller in a rack. This object is now obsolete.
OBJECT-TYPE    
  RaidControllerConfigEntry  

raidControllerConfigRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.1
The rack in which the RAID controller is located. The controller identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

raidControllerConfigDRAMSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.2
The size of the DRAM present in the RAID controller in bytes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigFlashSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.3
The size of flash memory present in the RAID controller in bytes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigNVRSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.4
The size of non volatile memory present in the RAID controller in bytes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigClockSpeed 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.5
The clock speed of the memory in the RAID controller in nanoseconds. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMemAccess 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.6
The access time of the memory in the RAID controller in nanoseconds. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMemCycle 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.7
The cycle time of the memory in the RAID controller in nanoseconds. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigPhysicalSectorSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.8
The physical sector size supported by the RAID controller in bytes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigLogicalSectorSize 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.9
The logical sector size supported by the RAID controller in bytes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMaxSystemDrives 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.10
The maximum number of system drives supported by the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMaxDrivesPerSystemDrive 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.11
The maximum number of drives which the RAID controller permits to be part of a system drive. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMaxSpanPerVirtualDrive 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.12
The maximum number of spans which the RAID controller permits to be part of a virtual drive. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigFirmwareVersion 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.13
Firmware version installed in this RAID controller. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

raidControllerConfigFirmwareType 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.14
Firmware type installed in this RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigFirmwareMajor 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.15
Major version of firmware installed in this RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigFirmwareMinor 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.16
Minor version of firmware installed in the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigMaximumCommands 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.17
Maximum number concurrent commands that may be performed by the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigFirmwareBuild 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.18
Build version of the firmware installed in the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigRebuildRate 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.19
The rebuild rate of the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigRebuildUnit 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.20
The rebuild unit size in milliseconds used in the rate figure raidControllerConfigRebuildRate for the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigRebuildOn 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.21
The rebuild on time of the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerConfigRebuildOff 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.2.1.22
The rebuild off time of the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerBatteryBackupTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3
A table containing information about the battery backup unit within each RAID controller present in each rack within the system. The number of entries in the table is given by the value of rackNumber provided that the system can communicate with the rack. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    RaidControllerBatteryBackupEntry

raidControllerBatteryBackupEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1
Information about the battery backup unit within a RAID controller. This object is now obsolete.
OBJECT-TYPE    
  RaidControllerBatteryBackupEntry  

raidControllerBatteryBackupRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.1
The rack in which the RAID controller containing the battery backup unit is located. The controller and battery backup unit identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

raidControllerBatteryBackupNoSync 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.2
Indicates whether a reconditioning cycle has been performed since power up of the RAID controller. noSync(1) - there has NOT been a reconditioning cycle since powering up the RAID controller. sync(2) - there has been a reconditioning cycle since powering up the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  INTEGER noSync(1), sync(2), unknown(3)  

raidControllerBatteryBackupOutOfSync 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.3
Indicates whether a reconditioning cycle is needed. outOfSync(1) - a reconditioning cycle needs to be performed. sync(2) - a reconditioning cycle does NOT need to be performed. This object is now obsolete.
OBJECT-TYPE    
  INTEGER outOfsync(1), sync(2), unknown(3)  

raidControllerBatteryBackupFirstWarning 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.4
Indicates whether a first warning for low battery power has been issued. firstWarning(1) - a first warning has been issued. noFirstWarning(2) - no first warning has been issued. This object is now obsolete.
OBJECT-TYPE    
  INTEGER firstWarning(1), noFirstWarning(2), unknown(3)  

raidControllerBatteryBackupSecondWarning 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.5
Indicates whether a second warning for low battery power has been issued. secondWarning(1) - a second warning has been issued. noSecondWarning(2) - no second warning has been issued. This object is now obsolete.
OBJECT-TYPE    
  INTEGER secondWarning(1), noSecondWarning(2), unknown(3)  

raidControllerBatteryBackupReconditioning 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.6
Indicates whether the battery is currently being reconditioned. reconditioning(1) - the battery is being reconditioned. notReconditioning(2) - the battery is NOT being reconditioned. This object is now obsolete.
OBJECT-TYPE    
  INTEGER reconditioning(1), notReconditioning(2), unknown(3)  

raidControllerBatteryBackupDischarging 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.7
Indicates whether the battery is currently being discharged. discharging(1) - the battery is currently being discharged. notDischarging(2) - the battery is NOT currently being discharged. This object is now obsolete.
OBJECT-TYPE    
  INTEGER discharging(1), notDischarging(2), unknown(3)  

raidControllerBatteryBackupFastCharging 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.8
Indicates whether the battery is currently fast charging. fastCharging(1) - the battery is currently being fast charged. notFastCharging(2) - the battery is NOT currently being fast charged. This object is now obsolete.
OBJECT-TYPE    
  INTEGER fastCharging(1), notFastCharging(2), unknown(3)  

raidControllerBatteryBackupLowPower 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.9
Indicates whether the battery is issuing a low power alarm. lowPowerAlarm(1) - the battery is issuing a low power alarm. noLowPowerAlarm(2) - the battery is NOT issuing a lower power alarm. This object is now obsolete.
OBJECT-TYPE    
  INTEGER lowPowerAlarm(1), noLowPowerAlarm(2), unknown(3)  

raidControllerBatteryBackupChargePercent 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.10
The percentage charge held by the battery. This object is now obsolete.
OBJECT-TYPE    
  INTEGER 0..100  

raidControllerBatteryBackupHardwareVersion 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.11
The hardware version of the battery backup unit. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerBatteryBackupBatteryType 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.12
The type of the battery in the battery backup unit. This object is now obsolete.
OBJECT-TYPE    
  INTEGER niCd(1), none(2), unknown(3), niMH(4), lion(5)  

raidControllerBatteryBackupThreshold 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.3.1.13
The threshold of the battery life in minutes. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerActiveTaskNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.4
The number of active tasks which are currently being performed by the RAID controller(s) in the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

raidControllerActiveTaskTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5
A table containing information about the tasks currently being performed by RAID controller(s) present in the system. The number of entries in this table is given by the value of raidControllerActiveTaskNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    RaidControllerActiveTaskEntry

raidControllerActiveTaskEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1
Information about the active task being performed by the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  RaidControllerActiveTaskEntry  

raidControllerActiveTaskRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.1
The rack in which the RAID controller is located. The controller identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

raidControllerActiveTaskIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.2
A unique value for each task being performed on a specific RAID controller. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerActiveTaskType 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.3
The type of task being performed by the RAID controller. This object is now obsolete.
OBJECT-TYPE    
  INTEGER initializing(1), checking(2), checkingAndRestoring(3), rebuilding(4), reconditioningBattery(5), chargingBattery(6), unknown(7), backgroundInitialising(8), migrating(9)  

raidControllerActiveTaskLUN 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.4
The LUN of the system drive on which the active task is being performed by the RAID controller. NOTE: the value is 0 for tasks which are not related to System Drives. These are where the variable raidControllerActiveTaskType is reconditioningBattery(5) or chargingBattery(6) (affecting the battery backup unit), or unknown(7). This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

raidControllerActiveTaskPercentageDone 1.3.6.1.4.1.11096.6.1.1.1.3.2.1.5.1.5
The percentage of the task which is complete. This object is now obsolete.
OBJECT-TYPE    
  INTEGER 0..100  

physicalDriveNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.1
The number of physical drive bays (regardless of whether they contain a drive) which are present within all racks and enclosures within the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

physicalDriveTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2
A table containing the status of each drive bay present on this system. The number of entries in this table is given by the value of physicalDriveNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    PhysicalDriveEntry

physicalDriveEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1
Status information about the drive bay. This object is now obsolete.
OBJECT-TYPE    
  PhysicalDriveEntry  

physicalDriveRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.1
The rack in which the drive is located. The drive identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

physicalDriveEnclosureIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.2
The enclosure in which the physical drive bay is located. Enclosure numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

physicalDriveColumnIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.3
The column in the enclosure in which the physical drive bay is located. Column numbers starts at 1 (column 1 is located at the left hand side of the enclosure). This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

physicalDriveRowIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.4
The row in the enclosure in which the physical drive bay is located. Row numbers starts at 1 (row 1 is located at the top of the enclosure). Example: row 1, column 1 is the top left hand bay within an enclosure. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

physicalDriveStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.5
The status of the physical drive bay. notPresent(1) - indicates that there is no drive present within the drive bay. This object is now obsolete.
OBJECT-TYPE    
  INTEGER notPresent(1), online(2), failed(3), rebuilding(6), hotspare(7), notConfigured(8), migrating(9), unknown(10)  

physicalDriveVendor 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.6
The vendor of the drive. NOTE: If the drive bay is empty this value will be set to unknown(2). This object is now obsolete.
OBJECT-TYPE    
  INTEGER seagate(1), unknown(2)  

physicalDriveVersion 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.7
The version of the firmware installed in the drive. NOTE: If the drive bay is empty this value will be a zero length string. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

physicalDriveCapacity 1.3.6.1.4.1.11096.6.1.1.1.3.2.2.2.1.8
The storage capacity of the drive in bytes. NOTE: If the drive bay is empty this value will be 0. This object is now obsolete.
OBJECT-TYPE    
  Counter64  

enclosureFanNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.1
The total number of fans which are present in all of the enclosures in all racks within the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosureFanTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2
A table containing status information for each fan located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureFanNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureFanEntry

enclosureFanEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1
Fan status information. This object is now obsolete.
OBJECT-TYPE    
  EnclosureFanEntry  

enclosureFanRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.1
The rack in which the fan is located. The fan identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

enclosureFanEnclosureIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.2
The enclosure in which the fan is located. Enclosure numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

enclosureFanFanIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.3
An identifier for the fan within the enclosure. Fan numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

enclosureFanStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.4
The status of the fan sensor. This object is now obsolete.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), unknown(3)  

enclosureFanSpeed 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.2.1.5
An indication of the speed at which the fan is running. This object is now obsolete.
OBJECT-TYPE    
  INTEGER fast(1), slow(2), stoppedOrUnknown(3)  

enclosureTemperatureNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.3
The total number of temperature sensors which are present in all of the enclosures in all racks within the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosureTemperatureTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4
A table containing temperature readings for each sensor located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureTemperatureNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureTemperatureEntry

enclosureTemperatureEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1
Information obtained from a temperature sensor located within an enclosure. This object is now obsolete.
OBJECT-TYPE    
  EnclosureTemperatureEntry  

enclosureTemperatureRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.1
The rack in which the temperature sensor is located. The sensor identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

enclosureTemperatureEnclosureIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.2
The enclosure in which the temperature sensor is located. Enclosure numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..8  

enclosureTemperatureTempIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.3
An identifier for the temperature sensor within the enclosure. Temperature sensor numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..4  

enclosureTemperatureStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.4
The status of the temperature sensor. This object is now obsolete.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), unknown(3)  

enclosureTemperatureOverTemp 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.5
A flag indicating whether an over temperature has been detected by the sensor. overTemp(1) - an over temperature has been detected. noOverTemp(2) - an over temperature has NOT been detected. This object is now obsolete.
OBJECT-TYPE    
  INTEGER overTemp(1), noOverTemp(2), unknown(3)  

enclosureTemperatureTempC 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.6
The temperature measured by the sensor in degrees Celsius. A value of -1 indicates the temperature could not be determined. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosureTemperatureTempF 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.7
The temperature measured by the sensor in degrees Fahrenheit. A value of -1 indicates the temperature could not be determined. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosureTemperatureRange 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.4.1.8
Status indicator of the temperature with regard to the operating temperatures expected within the enclosure. This object is now obsolete.
OBJECT-TYPE    
  INTEGER normal(1), warm(2), hot(3), unknown(4)  

enclosurePSUNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.5
The total number of power supplies which are present in all of the enclosures in all racks within the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosurePSUTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6
A table containing status information on each power supply located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosurePSUNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosurePSUEntry

enclosurePSUEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1
Information about a power supply within an enclosure. This object is now obsolete.
OBJECT-TYPE    
  EnclosurePSUEntry  

enclosurePSURackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.1
The rack in which the power supply is located. The power supply identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

enclosurePSUEnclosureIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.2
The enclosure in which the power supply is located. Enclosure numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..8  

enclosurePSUPSUIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.3
An identifier for the power supply within the enclosure. Power supply numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..4  

enclosurePSUStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.6.1.4
The operational status of the power supply. This object is now obsolete.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), unknown(3)  

enclosureAlarmNumber 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.7
The total number of alarm modules which are present in all of the enclosures in all racks within the system. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

enclosureAlarmTable 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8
A table containing status information on each alarm module located within each enclosure (of each rack) within this system. The number of entries in this table is given by the value of enclosureAlarmNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    EnclosureAlarmEntry

enclosureAlarmEntry 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1
Information about a alarm module within an enclosure. This object is now obsolete.
OBJECT-TYPE    
  EnclosureAlarmEntry  

enclosureAlarmRackIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.1
The rack in which the alarm module is located. The alarm module identified by a particular value of this index is located within the rack identified by the same value of rackIndex. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..10  

enclosureAlarmEnclosureIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.2
The enclosure in which the alarm module is located. Enclosure numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..4  

enclosureAlarmAlarmIndex 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.3
An identifier for the alarm module within the enclosure. Alarm module numbers start at 1. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..4  

enclosureAlarmStatus 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.4
The operational status of alarm module. This object is now obsolete.
OBJECT-TYPE    
  INTEGER ok(1), failed(2), unknown(3)  

enclosureAlarmBeeping 1.3.6.1.4.1.11096.6.1.1.1.3.2.3.8.1.5
Indicates whether the alarm module is beeping or not. This object is now obsolete.
OBJECT-TYPE    
  INTEGER beeping(1), notBeeping(2), unknown(3)  

automountNumber 1.3.6.1.4.1.11096.6.1.1.1.3.3.1
The number of automounts configured. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  Integer32  

automountTable 1.3.6.1.4.1.11096.6.1.1.1.3.3.2
A table containing the automount configuration. The number of entries in this table is given by the value of automountNumber. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  SEQUENCE OF  
    AutomountEntry

automountEntry 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1
An automount configuration entry. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  AutomountEntry  

automountIndex 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.1
An identifier for the automount. Its value ranges between 1 and the value of automountNumber. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  Integer32 1..100  

automountPartitionIndex 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.2
The partition number of the disk to automount. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  Unsigned32  

automountWWN 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.3
The world wide name (WWN) of the disk to automount. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  DisplayString  

automountLUN 1.3.6.1.4.1.11096.6.1.1.1.3.3.2.1.4
The logical unit number (LUN) of the disk to automount. This object is obsolete. Volumes are no longer automounted.
OBJECT-TYPE    
  Unsigned32  

sysDriveNumber 1.3.6.1.4.1.11096.6.1.1.1.3.4.1
The number of accessible system drives. NOTE: A system drive is a single logical drive which is created and managed by a RAID controller. It comprises of a number of physical drives, each of which contribute to the total storage capability of the system drive.
OBJECT-TYPE    
  Integer32  

sysDriveTable 1.3.6.1.4.1.11096.6.1.1.1.3.4.2
A table containing information about each accessible system drive. The number of entries in this table is given by the value of sysDriveNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    SysDriveEntry

sysDriveEntry 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1
Information about a system drive.
OBJECT-TYPE    
  SysDriveEntry  

sysDriveIndex 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.1
An identifier for the system drive (system drive id). Its value ranges between 1 and the value of sysDriveNumber.
OBJECT-TYPE    
  Integer32 1..25  

sysDriveWWN 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.2
The world wide name (WWN) of the system drive.
OBJECT-TYPE    
  DisplayString  

sysDriveLUN 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.3
The logical unit number (LUN) of the system drive. NOTE: upto 8 system drives can exist under a single RAID controller. LUNs range from 0 to 7.
OBJECT-TYPE    
  Unsigned32  

sysDriveStatus 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.4
The status of the system drive. online(1) - the system drive is accessible through the fibre channel interface. corrupt(2) - the system drives master boot record is corrupt. failed(3) - the system drive has failed and is no longer accessible through the fibre channel interface. notPresent(4) - device no longer present. disconnected(5) - device is present but not accessible by the controller offline(6) - all ports are offline initializing(7) - not accessible until initialization phase has completed formatting(8) - device is formatting unknown(9) - unknown device status This object will only have the value unknown(9).
OBJECT-TYPE    
  INTEGER online(1), corrupt(2), failed(3), notPresent(4), disconnected(5), offline(6), initializing(7), formatting(8), unknown(9)  

sysDriveCapacity 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.5
The capacity of the system drive in bytes.
OBJECT-TYPE    
  Counter64  

sysDriveRaidLevel 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.6
The configured RAID level of the system drive. NOTE : jBOD(6) - means just a bunch of disks.
OBJECT-TYPE    
  INTEGER raid0(1), raid1(2), raid3(3), raid5(4), raid10(5), jBOD(6), raid30(7), raid50(8), unknown(9)  

sysDriveCacheMode 1.3.6.1.4.1.11096.6.1.1.1.3.4.2.1.7
The caching mode employed by the RAID controller for this system drive. This object will only have the value unknown(3).
OBJECT-TYPE    
  INTEGER writeThrough(1), writeBack(2), unknown(3)  

volumeNumber 1.3.6.1.4.1.11096.6.1.1.1.3.5.1
The number of volumes which are known to the system.
OBJECT-TYPE    
  Integer32  

volumeTable 1.3.6.1.4.1.11096.6.1.1.1.3.5.2
A table containing information about each volume known to the system. The number of entries in this table is given by the value of volumeNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    VolumeEntry

volumeEntry 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1
Information about a volume.
OBJECT-TYPE    
  VolumeEntry  

volumeSysDriveIndex 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.1
The system drive on which the volume is stored. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex.
OBJECT-TYPE    
  Integer32 1..2147483647  

volumePartitionID 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.2
The partition ID of the volume. NOTE: this is the offset from the start of the system drive at which the volume starts.
OBJECT-TYPE    
  Unsigned32  

volumeLabel 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.3
The label assigned to the volume by a user for identification purposes. NOTE: If a label has not been assigned to the volume, this value will be a zero length string.
OBJECT-TYPE    
  DisplayString  

volumeStatus 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.4
The status of the volume. unformatted(1) - the volume does NOT contain a filesystem. mounted(2) - the volume contains a file system and may be being accessed by users. formatted(3) - the volume contains a filesystem, but is not accessible by users as it is not mounted. needsChecking(4) - the filesystem has some errors and cannot be mounted. Its must be checked and fixed before it can be accessed by users.
OBJECT-TYPE    
  INTEGER unformatted(1), mounted(2), formatted(3), needsChecking(4)  

volumeCapacity 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.5
The volumes capacity in bytes.
OBJECT-TYPE    
  Counter64  

volumeFreeCapacity 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.6
The remaining free volume capacity in bytes. NOTE: This value is 0 if the volume is not mounted.
OBJECT-TYPE    
  Counter64  

volumeEnterpriseVirtualServer 1.3.6.1.4.1.11096.6.1.1.1.3.5.2.1.7
The name of the Enterprise Virtual Server to which this volume is assigned.
OBJECT-TYPE    
  DisplayString  

fsStatsTable 1.3.6.1.4.1.11096.6.1.1.1.3.5.3
A table containing statistics about each FileSystem known to the system. The number of entries in this table is given by the value of volumeNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    FsStatsEntry

fsStatsEntry 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1
Statistics on a FileSystem.
OBJECT-TYPE    
  FsStatsEntry  

fsPermId 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.1
The permanent ID of the FileSystem for which these statistics are reported.
OBJECT-TYPE    
  Counter64  

fsLabel 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.2
The label of the FileSystem for which these statistics are reported.
OBJECT-TYPE    
  DisplayString  

opsPerSecAverage 1.3.6.1.4.1.11096.6.1.1.1.3.5.3.1.3
The average ops per second for the FileSystem. If the FileSystem is not mounted, or is unavailable for some other reason, this value is zero.
OBJECT-TYPE    
  Unsigned32  

fcRequests 1.3.6.1.4.1.11096.6.1.1.1.3.6.1
The total number of requests issued through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcResponses 1.3.6.1.4.1.11096.6.1.1.1.3.6.2
The total number of responses received through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcReadReqs 1.3.6.1.4.1.11096.6.1.1.1.3.6.3
The total number of disk read requests issued through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcWriteReqs 1.3.6.1.4.1.11096.6.1.1.1.3.6.4
The total number of disk write requests issued through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcReadResps 1.3.6.1.4.1.11096.6.1.1.1.3.6.5
The total number of disk read responses received through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcWriteResps 1.3.6.1.4.1.11096.6.1.1.1.3.6.6
The total number of disk write responses received through the fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcInstInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.7
The instantaneous receive rate in bytes per second for data received through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcInstOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.8
The instantaneous transmission rate in bytes per second for data transmitted through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcPkInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.9
The peak receive rate in bytes per second for data received through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcPkOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.10
The peak transmission rate in bytes per second for data transmitted through the fibre channel interface. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcCacheHits 1.3.6.1.4.1.11096.6.1.1.1.3.6.11
The total number of disk read requests which were fulfilled through reading the sector cache (ie the requests did NOT require access to the disk).
OBJECT-TYPE    
  Counter64  

fcCacheMisses 1.3.6.1.4.1.11096.6.1.1.1.3.6.12
The total number disk read requests which required access to the disk (ie the requests could NOT be fulfilled through reading the sector cache).
OBJECT-TYPE    
  Counter64  

fcLossSignalErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.13
The total number of loss of signal errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcBadRXCharErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.14
The total number of bad receive character errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcLossSyncErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.15
The total number of loss of synchronisation errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcLinkFailErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.16
The total number of link fail errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcRXEOFErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.17
The total number of messages received from the frame sender indicating that the frame should be aborted because a problem occurred during transmission. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcDiscardedFrameErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.18
The total number of discarded frame errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcBadCRCErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.19
The total number of framing errors due to bad cyclic redundancy codes. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcProtErrs 1.3.6.1.4.1.11096.6.1.1.1.3.6.20
The total number of fibre channel protocol errors. This object is obsolete. It forms a column in fcStatsTable.
OBJECT-TYPE    
  Counter32  

fcIOStatusResubs 1.3.6.1.4.1.11096.6.1.1.1.3.6.21
The number of I/O requests that were resubmitted because they failed the first time.
OBJECT-TYPE    
  Counter64  

fcIOStatusFails 1.3.6.1.4.1.11096.6.1.1.1.3.6.22
The number of I/O requests that failed after resubmission. NOTE: This indicates a fatal error condition with the fibre channel interface hardware.
OBJECT-TYPE    
  Counter64  

fibreChannelInterfaceNumber 1.3.6.1.4.1.11096.6.1.1.1.3.6.23
The number of fibre channel interfaces.
OBJECT-TYPE    
  Unsigned32 1..32  

fcStatsTable 1.3.6.1.4.1.11096.6.1.1.1.3.6.24
A table of statistics for the fibre channel interfaces. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    FcStatsEntry

fcStatsEntry 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1
A set of statistics for a fibre channel interface. The interface is indexed by fcInterfaceIndex. This object is now obsolete.
OBJECT-TYPE    
  FcStatsEntry  

fcInterfaceIndex 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.1
The index of the fibre channel interface to which the statistics in this row apply. This object is now obsolete.
OBJECT-TYPE    
  Integer32 0..128  

fcInstantaneousInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.2
The number of bytes received by a fibre channel interface in the last second. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcInstantaneousOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.3
The number of bytes transmitted by a fibre channel interface in the last second. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcPeakInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.4
The peak receive rate in bytes per second for data received through a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcPeakOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.5
The peak transmission rate in bytes per second for data transmitted through a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcSignalLossErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.6
The total number of loss of signal errors by a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcBadRXCharErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.7
The number of bad receive character errors at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcLossSyncErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.8
The number of loss of synchronisation errors at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcLinkFailErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.9
The number of link fail errors at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcRXEOFErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.10
The number of messages received at a fibre channel interface from the frame sender indicating that the frame should be aborted because a problem occurred during transmission. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcDiscardedFrameErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.11
The number of discarded frame errors at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcBadCRCErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.12
The number of framing errors due to bad cyclic redundancy codes, at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcProtocolErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.24.1.13
The number of fibre channel protocol errors at a fibre channel interface. This object is now obsolete.
OBJECT-TYPE    
  Counter32  

fcStatisticsTable 1.3.6.1.4.1.11096.6.1.1.1.3.6.25
A table of statistics for the fibre channel interfaces.
OBJECT-TYPE    
  SEQUENCE OF  
    FcStatisticsEntry

fcStatisticsEntry 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1
A set of statistics for a fibre channel interface. The interface is indexed by fcInterfaceIndex.
OBJECT-TYPE    
  FcStatisticsEntry  

fcStatsClusterNode 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.1
The Cluster Node to which this row applies.
OBJECT-TYPE    
  Integer32 0..128  

fcStatsInterfaceIndex 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.2
The index of the fibre channel interface to which the statistics in this row apply.
OBJECT-TYPE    
  Integer32 0..128  

fcStatsInterfaceEnabled 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.3
Whether the fibre interface is enabled or not. unknown(0) - the information could not be obtained. enabled(1) - the interface is enabled. disabled(2) - the interface is disabled.
OBJECT-TYPE    
  INTEGER unknown(0), enabled(1), disabled(2)  

fcStatsInterfaceStatus 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.4
The status of the fibre interface. unknown(0) - the information could not be obtained. up(1) - the interface is up. isolated(2) - the interface is isolated. down(3) - the interface is down.
OBJECT-TYPE    
  INTEGER unknown(0), up(1), isolated(2), down(3)  

fcStatsInterfaceLinkSpeed 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.5
The speed of the fibre channel interface in Gbps.
OBJECT-TYPE    
  Integer32 0..128  

fcStatsInterfaceLinkType 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.6
The link-type of the fibre interface. unknown(0) - the information could not be obtained. n(1) - fabric direct attach. nl(2) - arbitrated loop operation.
OBJECT-TYPE    
  INTEGER unknown(0), n(1), nl(2)  

fcStatsInstantaneousInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.7
The number of bytes received by a fibre channel interface in the last second.
OBJECT-TYPE    
  Counter32  

fcStatsInstantaneousOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.8
The number of bytes transmitted by a fibre channel interface in the last second.
OBJECT-TYPE    
  Counter32  

fcStatsPeakInRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.9
The peak receive rate in bytes per second for data received through a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsPeakOutRate 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.10
The peak transmission rate in bytes per second for data transmitted through a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsTotalRxBytes 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.11
The total bytes received through a fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcStatsTotalTxBytes 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.12
The total bytes transmitted through a fibre channel interface.
OBJECT-TYPE    
  Counter64  

fcStatsSignalLossErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.13
The total number of loss of signal errors by a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsBadRXCharErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.14
The number of bad receive character errors at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsLossSyncErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.15
The number of loss of synchronisation errors at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsLinkFailErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.16
The number of link fail errors at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsRXEOFErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.17
The number of messages received at a fibre channel interface from the frame sender indicating that the frame should be aborted because a problem occurred during transmission.
OBJECT-TYPE    
  Counter32  

fcStatsDiscardedFrameErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.18
The number of discarded frame errors at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsBadCRCErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.19
The number of framing errors due to bad cyclic redundancy codes, at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

fcStatsProtocolErrors 1.3.6.1.4.1.11096.6.1.1.1.3.6.25.1.20
The number of fibre channel protocol errors at a fibre channel interface.
OBJECT-TYPE    
  Counter32  

virtualVolumeNumber 1.3.6.1.4.1.11096.6.1.1.1.3.7.1
The number of virtual volumes which are currently accessible. NOTE: a virtual volume is only accessible if its associated parent volume is mounted. This object has been obsolete.
OBJECT-TYPE    
  Integer32  

virtualVolumeTable 1.3.6.1.4.1.11096.6.1.1.1.3.7.2
A table containing information about each virtual volume. The number of entries in this table is given by the value of virtualVolumeNumber. This object has been obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    VirtualVolumeEntry

virtualVolumeEntry 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1
Information about a virtual volume. This object has been obsolete.
OBJECT-TYPE    
  VirtualVolumeEntry  

virtualVolumeSysDriveIndex 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.1
The parent system drive of the virtual volume. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..25  

virtualVolumePartitionID 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.2
The partition ID of the parent volume of this virtual volume. The virtualVolumeSysDriveIndex and this value may be used to index the volumeTable in order to establish the parent volume. This object has been obsolete.
OBJECT-TYPE    
  Unsigned32  

virtualVolumeLabel 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.3
The label assigned to the virtual volume by a user for identification purposes. This object has been obsolete.
OBJECT-TYPE    
  DisplayString  

virtualVolumeQuotaEnabled 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.4
Indicates whether the virtual volume quota checking facility is enabled or not. enabled(1) - quota checking is enabled. disabled(2) - quota checking is disabled. This object has been obsolete.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

virtualVolumeLimit 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.5
The maximum size this virtual volume is limited to in bytes for the purposes of quota checking. This object has been obsolete.
OBJECT-TYPE    
  Counter64  

virtualVolumeWarningAlert 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.6
If the quota facility is enabled and the storage space used exceeds this percentage of the virtual volumes limit (virtualVolumeLimit) a warning alert will be generated. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..100  

virtualVolumeCriticalAlert 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.7
If the quota facility is enabled and the storage space used exceeds this percentage of the virtual volumes limit (virtualVolumeLimit) a critical alert will be generated. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..100  

virtualVolumeHardLimitEnabled 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.8
If the quota facility is enabled, this value indicates whether the file system should enforce a hard limit on the quota such that if the virtual volumes limit (virtualVolumeLimit) is reached, the user will not be able to create or modify any file which would cause the quota to be exceeded. enabled(1) - quota hard limit is enabled. disabled(2) - quota hard limit is disabled. This object has been obsolete.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

virtualVolumeQuotaBytesUsed 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.9
If the quota facility is enabled this value is the number of bytes used from this quota otherwise it will be set 0. This object has been obsolete.
OBJECT-TYPE    
  Counter64  

virtualVolumeQuotaPercentageUsed 1.3.6.1.4.1.11096.6.1.1.1.3.7.2.1.10
If the quota facility is enabled this value is the percentage of the quota used otherwise it will set to 0. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..100  

memberListNumber 1.3.6.1.4.1.11096.6.1.1.1.3.7.3
The number of member list entries for all virtual volumes which are accessible. This object has been obsolete.
OBJECT-TYPE    
  Integer32  

memberListTable 1.3.6.1.4.1.11096.6.1.1.1.3.7.4
A table containing information about each member list item. The number of entries in this table is given by the value of memberListNumber.. This object has been obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    MemberListEntry

memberListEntry 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1
Information about a member list item. This object has been obsolete.
OBJECT-TYPE    
  MemberListEntry  

memberListVolumeSysDriveIndex 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.1
The parent system drive of the virtual volume and member list item. The system drive identified by a particular value of this index is located on the system drive identified by the same value of sysDriveIndex. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..25  

memberListVolumePartitionID 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.2
The partition ID of the parent volume of this virtual volume and member list item. The memberListVolumeSysDriveIndex and this value may be used to index the volumeTable in order to establish the parent volume. This object has been obsolete.
OBJECT-TYPE    
  Unsigned32  

memberListVirtualVolumeLabel 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.3
The label of the parent virtual volume of this member list item. This object has been obsolete.
OBJECT-TYPE    
  DisplayString  

memberListIndex 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.4
An identifier for this member list entry. This identifier ranges from 1 to the number of member list items configured for the parent virtual volume. This object has been obsolete.
OBJECT-TYPE    
  Integer32 1..200  

memberListPath 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.5
The path the member list item is associated with. This object has been obsolete.
OBJECT-TYPE    
  DisplayString  

memberListStatus 1.3.6.1.4.1.11096.6.1.1.1.3.7.4.1.6
This status of the member list item. This object has been obsolete.
OBJECT-TYPE    
  INTEGER done(1), pending(2), assigning(3), reparenting(4), deleting(5), failed(6)  

snapshotRuleNumber 1.3.6.1.4.1.11096.6.1.1.1.3.8.1
The number of snapshot rules which are configured for this system.
OBJECT-TYPE    
  Integer32  

snapshotRuleTable 1.3.6.1.4.1.11096.6.1.1.1.3.8.2
A table containing information about each snapshot rule. The number of entries in this table is given by the value of snapshotRuleNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    SnapshotRuleEntry

snapshotRuleEntry 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1
Information about a snapshot rule. This object is now obsolete.
OBJECT-TYPE    
  SnapshotRuleEntry  

snapshotRuleName 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.1
The name of the snapshot rule. Each snapshot rule has a unique name. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

snapshotRuleWWN 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.2
The world wide name (WWN) of the system drive the snapshot rule is associated with. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

snapshotRuleLUN 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.3
The logical unit number (LUN) of the system drive the snapshot rule is associated with. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

snapshotRulePartitionID 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.4
The partition ID of the volume the snapshot rule is associated with. This object is now obsolete.
OBJECT-TYPE    
  Unsigned32  

snapshotRuleQueueSize 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.5
The number of snapshots to keep before the system deletes the oldest snapshot. This object is now obsolete.
OBJECT-TYPE    
  Integer32  

snapshotRuleVolumeLabel 1.3.6.1.4.1.11096.6.1.1.1.3.8.2.1.6
The label of the volume to which the snapshot rule relates. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

snapshotScheduleNumber 1.3.6.1.4.1.11096.6.1.1.1.3.8.3
The number of snapshot schedules which are configured for this system.
OBJECT-TYPE    
  Integer32  

snapshotScheduleTable 1.3.6.1.4.1.11096.6.1.1.1.3.8.4
A table containing information about each snapshot schedule. The number of entries in this table is given by the value of snapshotScheduleNumber. This object is now obsolete.
OBJECT-TYPE    
  SEQUENCE OF  
    SnapshotScheduleEntry

snapshotScheduleEntry 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1
Information about a snapshot schedule. This object is now obsolete.
OBJECT-TYPE    
  SnapshotScheduleEntry  

snapshotScheduleRuleName 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.1
The name of the parent snapshot rule that this schedule is associated with. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

snapshotScheduleIndex 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.2
An identifier for this snapshot schedule entry. This identifier ranges from 1 to the number of snapshot schedules configured for the parent snapshot rule. This object is now obsolete.
OBJECT-TYPE    
  Integer32 1..100  

snapshotScheduleDateTimeSpec 1.3.6.1.4.1.11096.6.1.1.1.3.8.4.1.3
The date and time specification for when this snapshot schedule will be run in cron format. This object is now obsolete.
OBJECT-TYPE    
  DisplayString  

snapshotRulesTable 1.3.6.1.4.1.11096.6.1.1.1.3.8.5
A table containing information about each snapshot rule. The number of entries in this table is given by the value of snapshotRuleNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    SnapshotRulesEntry

snapshotRulesEntry 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1
Information about a snapshot rule.
OBJECT-TYPE    
  SnapshotRulesEntry  

snapshotRulesEVS 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.1
The ID of the EVS on which this rule is defined.
OBJECT-TYPE    
  Unsigned32  

snapshotRulesName 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.2
The name of the snapshot rule. Each snapshot rule has a unique name.
OBJECT-TYPE    
  DisplayString  

snapshotRulesQueueSize 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.3
The number of snapshots to keep before the system deletes the oldest snapshot.
OBJECT-TYPE    
  Integer32  

snapshotRulesVolumeLabel 1.3.6.1.4.1.11096.6.1.1.1.3.8.5.1.4
The label of the volume to which the snapshot rule relates.
OBJECT-TYPE    
  DisplayString  

snapshotSchedulesTable 1.3.6.1.4.1.11096.6.1.1.1.3.8.6
A table containing information about each snapshot schedule. The number of entries in this table is given by the value of snapshotScheduleNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    SnapshotSchedulesEntry

snapshotSchedulesEntry 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1
Information about a snapshot schedule.
OBJECT-TYPE    
  SnapshotSchedulesEntry  

snapshotSchedulesEVS 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.1
The ID of the EVS on which this schedule is defined.
OBJECT-TYPE    
  Unsigned32  

snapshotSchedulesRuleName 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.2
The name of the parent snapshot rule that this schedule is associated with.
OBJECT-TYPE    
  DisplayString  

snapshotSchedulesIndex 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.3
An identifier for this snapshot schedule entry. This identifier ranges from 1 to the number of snapshot schedules configured for the parent snapshot rule.
OBJECT-TYPE    
  Integer32 1..100  

snapshotSchedulesDateTimeSpec 1.3.6.1.4.1.11096.6.1.1.1.3.8.6.1.4
The date and time specification for when this snapshot schedule will be run in cron format.
OBJECT-TYPE    
  DisplayString  

nvramFsStatsNumber 1.3.6.1.4.1.11096.6.1.1.1.3.9.1
The number of volumes with NVRAM statistics.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramFsStatsTable 1.3.6.1.4.1.11096.6.1.1.1.3.9.2
A table of NVRAM data for a given volume.
OBJECT-TYPE    
  SEQUENCE OF  
    NvramFsStatsEntry

nvramFsStatsEntry 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1
Information about NVRAM on a given volume. The volume must be formatted, mounted, and NVRAM must be supported.
OBJECT-TYPE    
  NvramFsStatsEntry  

fsId 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.1
The id of the Span hosting the volume with which the NVRAM is associated.
OBJECT-TYPE    
  Unsigned32  

nvramFsStatsCurrentUsage 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.2
The amount of NVRAM currently in use for this volume.
OBJECT-TYPE    
  Unsigned32  

nvramFsStatsCheckpoints 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.3
The total number of checkpoints which have occurred for the NVRAM assigned to this volume.
OBJECT-TYPE    
  Unsigned32  

nvramFsStatsActivityCheckpoints 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.4
The number of checkpoints which have occurred for the NVRAM assigned to this volume as a result of file system activity (i.e. not timed checkpoints.
OBJECT-TYPE    
  Unsigned32  

nvramFsStatsWaitedAllocs 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.5
The number of allocations for this file system for which a wait has occurred.
OBJECT-TYPE    
  Unsigned32  

nvramFsStatsWaitingAllocs 1.3.6.1.4.1.11096.6.1.1.1.3.9.2.1.6
The number of allocations for this file system for which a wait is currently occurring.
OBJECT-TYPE    
  Unsigned32  

nvramPoolStatsTable 1.3.6.1.4.1.11096.6.1.1.1.3.9.6
A table of NVRAM data for a given Cluster Node.
OBJECT-TYPE    
  SEQUENCE OF  
    NvramPoolStatsEntry

nvramPoolStatsEntry 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1
Information about NVRAM on a given Cluster Node.
OBJECT-TYPE    
  NvramPoolStatsEntry  

clusterNodeId 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.1
The ID of the cluster node for which these pool statistics are reported.
OBJECT-TYPE    
  Unsigned32 0..255  

nvramPoolStatsSize 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.2
The total size of nvram. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolStatsMaximumUsed 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.3
The maximum amount of nvram used. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolStatsTotalCurrentUsage 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.4
The amount of nvram currently in use. If no formatted or mounted volume is found, or if nvram is not supported, this value will be reported as zero.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolStatsWaitedAllocs 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.5
The number of allocations, for the entire NVRAM pool, for which a wait has occurred.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

nvramPoolStatsWaitingAllocs 1.3.6.1.4.1.11096.6.1.1.1.3.9.6.1.6
The number of allocations, for the entire NVRAM pool, for which a wait is occurring.
OBJECT-TYPE    
  Unsigned32 1..2147483647  

ethOutPkts 1.3.6.1.4.1.11096.6.1.1.2.1.1
The number of packets successfully transmitted through the network interface. This object is obsolete. It has been grouped with other related statistics.
OBJECT-TYPE    
  Counter64  

ethInPkts 1.3.6.1.4.1.11096.6.1.1.2.1.2
The number of packets successfully received through the network interface. This object is obsolete. It has been grouped with other related statistics.
OBJECT-TYPE    
  Counter64  

ethInstInOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.3
The instantaneous receive rate in bytes per second for data received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter32  

ethInstOutOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.4
The instantaneous transmission rate in bytes per second for data transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter32  

ethPkInOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.5
The peak receive rate in bytes per second for data received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter32  

ethPkOutOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.6
The peak transmission rate in bytes per second for data transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter32  

ethInFIFODrops 1.3.6.1.4.1.11096.6.1.1.2.1.7
The number of FIFO drops which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethCRCErrs 1.3.6.1.4.1.11096.6.1.1.2.1.8
The number of cyclic redundancy code errors which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutFIFOUflows 1.3.6.1.4.1.11096.6.1.1.2.1.9
The number of transmit FIFO underflows which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutOneCollision 1.3.6.1.4.1.11096.6.1.1.2.1.10
The number of one collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutTwoCollision 1.3.6.1.4.1.11096.6.1.1.2.1.11
The number of two to fifteen collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutFifteenCollision 1.3.6.1.4.1.11096.6.1.1.2.1.12
The number of more than fifteen collisions which have occurred on the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethInEvFIFOPktDrop 1.3.6.1.4.1.11096.6.1.1.2.1.13
The number received packets dropped by the event FIFO. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethEvFIFOMaxEvents 1.3.6.1.4.1.11096.6.1.1.2.1.14
The maximum number of events in the event FIFO. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutPackets 1.3.6.1.4.1.11096.6.1.1.2.1.15
The number of packets successfully transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethInPackets 1.3.6.1.4.1.11096.6.1.1.2.1.16
The number of packets successfully received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethTotalPackets 1.3.6.1.4.1.11096.6.1.1.2.1.17
The total number of packets successfully transmitted and received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethOutBytes 1.3.6.1.4.1.11096.6.1.1.2.1.18
The number of bytes successfully transmitted through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethInBytes 1.3.6.1.4.1.11096.6.1.1.2.1.19
The number of bytes successfully received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethTotalBytes 1.3.6.1.4.1.11096.6.1.1.2.1.20
The total number of bytes successfully transmitted and received through the network interface. This object is obsolete. It now forms part of the table ethernetStatisticsTable.
OBJECT-TYPE    
  Counter64  

ethernetStatisticsTable 1.3.6.1.4.1.11096.6.1.1.2.1.21
A table of statistics for ethernet interfaces. The number of entries in this table is given by the value of ifNumber.
OBJECT-TYPE    
  SEQUENCE OF  
    EthernetStatisticsEntry

ethernetStatisticsEntry 1.3.6.1.4.1.11096.6.1.1.2.1.21.1
Statistics for ethernet interfaces.
OBJECT-TYPE    
  EthernetStatisticsEntry  

ethernetInstInOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.1
The instantaneous receive rate in bytes per second for data received through the network interface.
OBJECT-TYPE    
  Counter32  

ethernetInstOutOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.2
The instantaneous transmission rate in bytes per second for data transmitted through the network interface.
OBJECT-TYPE    
  Counter32  

ethernetPkInOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.3
The peak receive rate in bytes per second for data received through the network interface.
OBJECT-TYPE    
  Counter32  

ethernetPkOutOctetRate 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.4
The peak transmission rate in bytes per second for data transmitted through the network interface.
OBJECT-TYPE    
  Counter32  

ethernetInFIFODrops 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.5
The number of FIFO drops which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetCRCErrs 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.6
The number of cyclic redundancy code errors which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetOutFIFOUflows 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.7
The number of transmit FIFO underflows which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetOutOneCollision 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.8
The number of one collisions which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetOutTwoCollision 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.9
The number of two to fifteen collisions which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetOutFifteenCollision 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.10
The number of more than fifteen collisions which have occurred on the network interface.
OBJECT-TYPE    
  Counter64  

ethernetInEvFIFOPktDrop 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.11
The number received packets dropped by the event FIFO.
OBJECT-TYPE    
  Counter64  

ethernetEvFIFOMaxEvents 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.12
The maximum number of events in the event FIFO.
OBJECT-TYPE    
  Counter64  

ethernetOutPackets 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.13
The number of packets successfully transmitted through the network interface.
OBJECT-TYPE    
  Counter64  

ethernetInPackets 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.14
The number of packets successfully received through the network interface.
OBJECT-TYPE    
  Counter64  

ethernetTotalPackets 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.15
The total number of packets successfully transmitted and received through the network interface.
OBJECT-TYPE    
  Counter64  

ethernetOutBytes 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.16
The number of bytes successfully transmitted through the network interface.
OBJECT-TYPE    
  Counter64  

ethernetInBytes 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.17
The number of bytes successfully received through the network interface.
OBJECT-TYPE    
  Counter64  

ethernetTotalBytes 1.3.6.1.4.1.11096.6.1.1.2.1.21.1.18
The total number of bytes successfully transmitted and received through the network interface.
OBJECT-TYPE    
  Counter64  

tcpOpenConns 1.3.6.1.4.1.11096.6.1.1.2.2.1
The number of currently open TCP/IP connections.
OBJECT-TYPE    
  Counter32  

tcpMaxOpenConns 1.3.6.1.4.1.11096.6.1.1.2.2.2
The maximum number of open TCP/IP connections.
OBJECT-TYPE    
  Counter32  

tcpTotalOpenConns 1.3.6.1.4.1.11096.6.1.1.2.2.3
The total number of TCP/IP connections ever opened (cumulative).
OBJECT-TYPE    
  Counter64  

tcpFailedInConns 1.3.6.1.4.1.11096.6.1.1.2.2.4
The number of failed incoming TCP/IP connections.
OBJECT-TYPE    
  Counter64  

tcpFailedOutConns 1.3.6.1.4.1.11096.6.1.1.2.2.5
The number of failed outgoing TCP/IP connections.
OBJECT-TYPE    
  Counter64  

tcpOutSegments 1.3.6.1.4.1.11096.6.1.1.2.2.6
The number of segments transmitted. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpInSegments 1.3.6.1.4.1.11096.6.1.1.2.2.7
The number of segments received. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpReOutSegments 1.3.6.1.4.1.11096.6.1.1.2.2.8
The number of retransmitted segments. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpInvSegments 1.3.6.1.4.1.11096.6.1.1.2.2.9
The number of invalid segments. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInPkts 1.3.6.1.4.1.11096.6.1.1.2.2.10
The total number of IP packets received. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPOutPkts 1.3.6.1.4.1.11096.6.1.1.2.2.11
The total number of IP packets transmitted. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvPkts 1.3.6.1.4.1.11096.6.1.1.2.2.12
The total number of invalid IP packets received. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvHdrPkts 1.3.6.1.4.1.11096.6.1.1.2.2.13
The total number of IP packets received with invalid header fields. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvChksumPkts 1.3.6.1.4.1.11096.6.1.1.2.2.14
The total number of IP packets received with invalid checksums. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvNUcastAddrPkts 1.3.6.1.4.1.11096.6.1.1.2.2.15
The total number of IP packets received with broadcast/multicast destination address errors. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvUcastAddrPkts 1.3.6.1.4.1.11096.6.1.1.2.2.16
The total number of IP packets received with unicast destination address errors. This object is obsolete. It now forms part of the table tcpStatisticsTable.
OBJECT-TYPE    
  Counter64  

tcpIPInInvSrcAddrPkts 1.3.6.1.4.1.11096.6.1.1.2.2.17