BIANCA-BRICK-MSGBOX-MIB

File: BIANCA-BRICK-MSGBOX-MIB.mib (8612 bytes)

Imported modules

SNMPv2-TC RFC1155-SMI RFC-1212
BIANCA-BRICK-PPP-MIB

Imported symbols

DisplayString Counter OBJECT-TYPE
BitValue Date

Defined Types

HexValue  
INTEGER    

MsgForwardEntry  
SEQUENCE    
  msgForwardExtension DisplayString
  msgForwardAddr DisplayString
  msgForwardDeleteAction INTEGER
  msgForwardDelay INTEGER
  msgForwardPoll INTEGER
  msgForwardPollPassword DisplayString
  msgForwardMaxRetries INTEGER
  msgForwardState INTEGER

MsgDirEntry  
SEQUENCE    
  msgDirExtension DisplayString
  msgDirType INTEGER
  msgDirContent DisplayString
  msgDirTime Date
  msgDirDuration INTEGER
  msgDirSize INTEGER
  msgDirState INTEGER

Defined Values

org 1.3
OBJECT IDENTIFIER    

dod 1.3.6
OBJECT IDENTIFIER    

internet 1.3.6.1
OBJECT IDENTIFIER    

private 1.3.6.1.4
OBJECT IDENTIFIER    

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

bintec 1.3.6.1.4.1.272
OBJECT IDENTIFIER    

bibo 1.3.6.1.4.1.272.4
OBJECT IDENTIFIER    

isdn 1.3.6.1.4.1.272.4.2
OBJECT IDENTIFIER    

msgForwardTable 1.3.6.1.4.1.272.4.2.13
The msgForwardTable contains information about the behavior of the message box. You can configure which extensions are used to accept fax calls and how these faxes should be forwarded to the receiver. Deleting entries: An entry can be removed by assigning the value `delete' to its msgForwardPoll object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsgForwardEntry

msgForwardEntry 1.3.6.1.4.1.272.4.2.13.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsgForwardEntry  

msgForwardExtension 1.3.6.1.4.1.272.4.2.13.1.1
The extension of the incoming calls that is accepted by the message box. For this extension you also have to set the pabxExtDestination field in the pabxExtensionTable to `msg_box'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

msgForwardAddr 1.3.6.1.4.1.272.4.2.13.1.2
The Called Party Number that is used to send stored faxes. If this field is empty, stored faxes are not sent automatically to another number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

msgForwardDeleteAction 1.3.6.1.4.1.272.4.2.13.1.3
This field defines when a fax message, that was sent successfully, should be deleted. When set to `delivered' the fax will be deleted after it is sent anyway. When set to `forwarded' it will be deleted immediately after it was sent successfully to the number specified in the msgForwardAddr field. When set to `polled', the fax is deleted after someone received the fax via fax polling.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delivered(1), forwarded(2), polled(3)  

msgForwardDelay 1.3.6.1.4.1.272.4.2.13.1.4
The time in seconds to wait before the message box tries or retries to send a stored fax to the msgForwardAddr.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1209600  

msgForwardPoll 1.3.6.1.4.1.272.4.2.13.1.5
To allow polling stored fax messages this value must be set to `enable'. When set to `disable' fax polling is not allowed. When set to delete, the table-entry will be deleted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2), delete(3)  

msgForwardPollPassword 1.3.6.1.4.1.272.4.2.13.1.6
The password you have to use if you like to poll a stored fax.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

msgForwardMaxRetries 1.3.6.1.4.1.272.4.2.13.1.7
Number of trials to forward a fax message to an external fax station before the msgForwardState changes to the value `blocked'. A trial counts only when a connection could be established. When this field is set to zero, the state never changes to `blocked'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1000  

msgForwardState 1.3.6.1.4.1.272.4.2.13.1.8
Faxes are only forwarded to msgForwardAddr if the msgForwardState has the value `enabled'. The msgForwardState is set automatically to `blocked' when the number of retries reaches msgForwardMaxRetries.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), blocked(3)  

msgDirTable 1.3.6.1.4.1.272.4.2.14
The msgDirTable contains information for all FAX messages that are currently stored in the flash ROM. Deleting entries: An entry can be removed by assigning the value `delete' to its msgDirState object.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MsgDirEntry

msgDirEntry 1.3.6.1.4.1.272.4.2.14.1
Tok_String
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MsgDirEntry  

msgDirExtension 1.3.6.1.4.1.272.4.2.14.1.1
The called number when the fax was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

msgDirType 1.3.6.1.4.1.272.4.2.14.1.2
The msgDirType specifies which kind of data belongs to this msgDirTable entry
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(1), fax(2)  

msgDirContent 1.3.6.1.4.1.272.4.2.14.1.3
The msgDirContent is a unique string to identify the msgDirTable entry. It contains the data type, a unique number and the number of the remote fax station
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

msgDirTime 1.3.6.1.4.1.272.4.2.14.1.4
The msgDirTime contains the date and time when the fax was received.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Date  

msgDirDuration 1.3.6.1.4.1.272.4.2.14.1.5
The msgDirDuration contains for fax messages the number of stored pages.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msgDirSize 1.3.6.1.4.1.272.4.2.14.1.6
The msgDirSize contains the number Bytes that are used to store this message in the flash ROM.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

msgDirState 1.3.6.1.4.1.272.4.2.14.1.7
The state of the message. To delete a message, assign the value `delete' to this object, then the msgDirState will change to `deleted' and the memory that is used by this message will be available again after the next automatic reorganisation of the flash ROM.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER receiving(1), received(2), sent(3), deleted(4), delete(5)