BCS-TRAPS-MIB

File: BCS-TRAPS-MIB.mib (40105 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC BCS-IDENT-MIB

Imported symbols

IpAddress TimeTicks OBJECT-TYPE
Integer32 MODULE-IDENTITY DisplayString
TEXTUAL-CONVENTION bcs

Defined Types

ConfigChangeState  
Represents the current state of a configuration change
TEXTUAL-CONVENTION    
  INTEGER staged(1), applied(2), saved(3)  

ConfigChangeAction  
Represents the action required to instantiate configuration change.
TEXTUAL-CONVENTION    
  INTEGER waitingRetune(1), waitingSave(2), waitingReboot(3)  

TrapReceiversEntry  
SEQUENCE    
  trapReceiversTableIndex INTEGER
  trapReceiverAddr IpAddress
  trapReceiverCommunityString DisplayString
  trapToBeSendQueueSize INTEGER
  trapSentQueueSize INTEGER
  trapThrottlingRate Integer32
  trapLastSent INTEGER
  trapReceiversEntryOperState INTEGER
  trapResendRequest Integer32

TrapDiscrimEntry  
SEQUENCE    
  trapDiscrimTableIndex INTEGER
  trapDiscrimReceiverAddr IpAddress
  trapDiscrimAvailabilityStatus INTEGER
  trapDiscrimWeeklyMask DisplayString
  trapDiscrimDailyStartTime INTEGER
  trapDiscrimDailyStopTime INTEGER
  trapSeverityDiscrim INTEGER
  trapDiscrimOperationalState INTEGER
  trapDiscrimConfigChangeCntl INTEGER

Defined Values

bcsTraps 1.3.6.1.4.1.1166.7.3
The MIB module for the bcs common trap objects.
MODULE-IDENTITY    

bcsTrapElements 1.3.6.1.4.1.1166.7.3.1
OBJECT IDENTIFIER    

bcsTrapControl 1.3.6.1.4.1.1166.7.3.2
OBJECT IDENTIFIER    

trapIdentifier 1.3.6.1.4.1.1166.7.3.1.1
This object identifies the specific notification issued by the network element.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapSequenceId 1.3.6.1.4.1.1166.7.3.1.2
This object identifies the specific notification issued by the network element.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapNetworkElemModelNumber 1.3.6.1.4.1.1166.7.3.1.3
The value of this object is the model number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapNetworkElemSerialNum 1.3.6.1.4.1.1166.7.3.1.4
The value of this object is the serial number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapPerceivedSeverity 1.3.6.1.4.1.1166.7.3.1.5
This parameter defines five severity levels, which provide an indication of how it is perceived that the capability of the managed object has been affected. The other level is not a severity level, but indicates that an alarm has been cleared, and thus is no longer in alarm state. Note that this field has no meaning for configuration change traps.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cleared(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

trapNetworkElemOperState 1.3.6.1.4.1.1166.7.3.1.6
The current Operational State of the Network Element which generated the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

trapNetworkElemAlarmStatus 1.3.6.1.4.1.1166.7.3.1.7
The current Alarm Status of the Network Element Alarm Status is always equal to the highest severity level of all outstanding alarms in this NE.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER idle(1), indeterminate(2), warning(3), minor(4), major(5), critical(6)  

trapNetworkElemAdminState 1.3.6.1.4.1.1166.7.3.1.8
The current Adminsitrative state of the network element.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER locked(1), unlocked(2), shuttingDown(3)  

trapNetworkElemAvailStatus 1.3.6.1.4.1.1166.7.3.1.9
The current Operational state of the network elment is defined in ISO/IEC 10164-2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inTest(1), failed(2), powerOff(3), offLine(4), offDuty(5), dependency(6), degraded(7), notInstalled(8), logFull(9), available(10)  

trapText 1.3.6.1.4.1.1166.7.3.1.10
This variable contains an optional trap text.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapNETrapLastTrapTimeStamp 1.3.6.1.4.1.1166.7.3.1.11
This OBJECT IDENTIFIER is used to hold time, in hundreths of a second since the network management portion of the system was last re-initialized.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

trapChangedObjectId 1.3.6.1.4.1.1166.7.3.1.12
This variable identifies the object that has generated the trap.
Status: current Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

trapAdditionalInfoInteger1 1.3.6.1.4.1.1166.7.3.1.13
This 32 bit integer is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapAdditionalInfoInteger2 1.3.6.1.4.1.1166.7.3.1.14
This 32 bit integer is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapAdditionalInfoInteger3 1.3.6.1.4.1.1166.7.3.1.15
This 32 bit integer is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapChangedValueDisplayString 1.3.6.1.4.1.1166.7.3.1.16
This DisplayString is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapChangedValueOID 1.3.6.1.4.1.1166.7.3.1.17
This OBJECT IDENTIFIER is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

trapChangedValueIpAddress 1.3.6.1.4.1.1166.7.3.1.18
This OBJECT IDENTIFIER is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

trapChangedValueInteger 1.3.6.1.4.1.1166.7.3.1.19
This 32 bit integer is used to hold specific information about the trap.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

numberOfTrapReceivers 1.3.6.1.4.1.1166.7.3.2.1
The number of managers to send traps to. This number can not exceed 4
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

trapReceiversTable 1.3.6.1.4.1.1166.7.3.2.2
A list of managers to send traps to. The number of entries is given by the value of NumTrapReceivers. Maximum number of Trap Receivers is four.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapReceiversEntry

trapReceiversEntry 1.3.6.1.4.1.1166.7.3.2.2.1
The list of managers to send traps.
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapReceiversEntry  

trapReceiversTableIndex 1.3.6.1.4.1.1166.7.3.2.2.1.1
The index to a trap receiver entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

trapReceiverAddr 1.3.6.1.4.1.1166.7.3.2.2.1.2
The IP address of the manager to send a trap to. NOTE: Changing TrapReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapReceiverCommunityString 1.3.6.1.4.1.1166.7.3.2.2.1.3
The community name to use in the trap when sent to the manager.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

trapToBeSendQueueSize 1.3.6.1.4.1.1166.7.3.2.2.1.4
The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent can receive a burst of traps which need to be sent to the network manager. The SNMP agent will put them in TrapsToBeSendQueue and from there hi will send traps to the a manager at throttling rate. The traps will be kept in sequence by the time at which they came in
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..1000  

trapSentQueueSize 1.3.6.1.4.1.1166.7.3.2.2.1.5
The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent maintains Trap History (TrapsSentQueue) by saving last 'X' sent traps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 50..300  

trapThrottlingRate 1.3.6.1.4.1.1166.7.3.2.2.1.6
The number of traps agent can send to a particular manager (trapReceiver) per second.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

trapLastSent 1.3.6.1.4.1.1166.7.3.2.2.1.7
This variable contains the last trapSequenceId (sequence number) agent sent to this manager. Upon startup agent will send cold-start trap and set value of TrapLastSent to 1.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapReceiversEntryOperState 1.3.6.1.4.1.1166.7.3.2.2.1.8
The current Operational State of this entry in trapReceivers Table
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

trapResendRequest 1.3.6.1.4.1.1166.7.3.2.2.1.9
The manager may write this object when the indicated trap (indicated via trapIdentifier) should be resent. It is not intended to be read by the manager, but is read-write for compatability with older SNMP compilers.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

numberOfDiscriminators 1.3.6.1.4.1.1166.7.3.2.3
The number of EFDs (filters) agent has in it's database. This number can not exceed 20
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..2147483647  

trapDiscrimTable 1.3.6.1.4.1.1166.7.3.2.4
A list of EFDs (trap filters). Before forwarding trap to a trapReceiver (manager) agent filters all traps acording to all EFDs defined for this manager.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrapDiscrimEntry

trapDiscrimEntry 1.3.6.1.4.1.1166.7.3.2.4.1
The list of discriminators (trap filters.)
Status: current Access: not-accessible
OBJECT-TYPE    
  TrapDiscrimEntry  

trapDiscrimTableIndex 1.3.6.1.4.1.1166.7.3.2.4.1.1
The index to a trap discriminator entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..20  

trapDiscrimReceiverAddr 1.3.6.1.4.1.1166.7.3.2.4.1.2
The IP address of the manager this Discrim belongs to. It should be equal to TrapReceiverAddr. NOTE: Changing trapDiscrimReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapDiscrimAvailabilityStatus 1.3.6.1.4.1.1166.7.3.2.4.1.3
This object reflects the current Availability status of the Discrim (based on ISO/IEC 10164-2).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER offDuty(5), available(10)  

trapDiscrimWeeklyMask 1.3.6.1.4.1.1166.7.3.2.4.1.4
This object represents weekly scedule for corresponding Discrim. The WeeklyMask consists of 7 numeric characters (1 for each day of the week). Each numeric character can take a value of either '1' - enabled or '2' - disabled. For example, with WeeklyMask='1122221', an agent will apply corresponding Discriminator only on Mondays, Tuesdays and Sundays. Any characters other than '1' and '2' will be ignored.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..7)  

trapDiscrimDailyStartTime 1.3.6.1.4.1.1166.7.3.2.4.1.5
This object represents daily start time for corresponding Discrim. The StartTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StartTime=70 represents start time of 1:10 AM.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1439  

trapDiscrimDailyStopTime 1.3.6.1.4.1.1166.7.3.2.4.1.6
This object represents daily stop time for corresponding Discrim. The StopTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StopTime=70 represents stop time of 1:10 AM.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1439  

trapSeverityDiscrim 1.3.6.1.4.1.1166.7.3.2.4.1.7
The severity threshold of traps to be send to the manager. Only traps of equal or greater severity than this value are sent to the manager.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER indeterminate(2), warning(3), minor(4), major(5), critical(6)  

trapDiscrimOperationalState 1.3.6.1.4.1.1166.7.3.2.4.1.8
The current Operational State of the Discriminator.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

trapDiscrimConfigChangeCntl 1.3.6.1.4.1.1166.7.3.2.4.1.9
This variable turns reporting of configuration changes on or off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)