BAS-RIP-MIB

File: BAS-RIP-MIB.mib (31322 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI
BAS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Counter32
IpAddress TruthValue TimeTicks
RowStatus basRip

Defined Types

BasRipIfEntry  
SEQUENCE    
  ripIfIpAddress IpAddress
  ripIfAddressLessIf INTEGER
  ripIfType INTEGER
  ripIfVersion INTEGER
  ripIfRecvVer INTEGER
  ripIfMetric INTEGER
  ripIfAcceptDefault TruthValue
  ripIfSilent TruthValue
  ripIfRecvRoutes TruthValue
  ripIfSubnetsOnly TruthValue
  ripIfSendDefaultOnly TruthValue
  ripIfSendDefaultAlso TruthValue
  ripIfDfltRouteMetric INTEGER
  ripIfSplitHorizon TruthValue
  ripIfPoison TruthValue
  ripIfFlash TruthValue
  ripAuthOn TruthValue
  ripIfAuthType INTEGER
  ripIfAuthKeyId INTEGER
  ripIfAuthKey OCTET STRING Size(0..16)
  ripIfUpdateInterval INTEGER
  ripIfUpdateInterPktGap INTEGER
  ripIfPktsPerUpdate INTEGER
  ripIfPortDown TruthValue
  ripIfRowStat RowStatus

BasRipNbrEntry  
SEQUENCE    
  ripNbrIfIpAddr IpAddress
  ripNbrIpAddr IpAddress
  ripNbrAddressLessIf INTEGER
  ripNbrType INTEGER
  ripNbrLastUpdate Counter32
  ripNbrTriggerMode INTEGER
  ripNbrRowStatus RowStatus

Defined Values

basRIP 1.3.6.1.4.1.3493.2.19.1
This module defines a portion of the proprietary management information base (MIB) for managing routing information protocol (RIP).
MODULE-IDENTITY    

ripIfStatsCurGroup 1.3.6.1.4.1.3493.2.19.1.1
OBJECT IDENTIFIER    

ripIfResetTime 1.3.6.1.4.1.3493.2.19.1.1.1
Time of last stats clear
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ripIfStatsIntfCnt 1.3.6.1.4.1.3493.2.19.1.1.2
Number of enabled interfaces running RIP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsNbrCnt 1.3.6.1.4.1.3493.2.19.1.1.3
Total number of neighbors of all RIP interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsPktsRcvd 1.3.6.1.4.1.3493.2.19.1.1.4
Total number of RIP packets received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsPktsSent 1.3.6.1.4.1.3493.2.19.1.1.5
Total number of RIP packets sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsReqsRcvd 1.3.6.1.4.1.3493.2.19.1.1.6
Total number of RIP requests received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsReqsSent 1.3.6.1.4.1.3493.2.19.1.1.7
Total number of RIP requests sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsRspsRcvd 1.3.6.1.4.1.3493.2.19.1.1.8
Total number of RIP responses received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsRspsSent 1.3.6.1.4.1.3493.2.19.1.1.9
Total number of RIP responses sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsRteTimouts 1.3.6.1.4.1.3493.2.19.1.1.10
Total number of RIP routes timed out
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsShrtPktsRcvd 1.3.6.1.4.1.3493.2.19.1.1.11
Total number of RIP packets with size less than RIP header size received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsBadVerRcvd 1.3.6.1.4.1.3493.2.19.1.1.12
Total number of RIP packets with version other than RIP version 1 or RIP version 2, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsBadZeroRcvd 1.3.6.1.4.1.3493.2.19.1.1.13
Total number of RIP packets with must be zero fields not set to zero, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsBadSrcPortRcvd 1.3.6.1.4.1.3493.2.19.1.1.14
Total number of RIP packets which did not originate from port 520, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsBadSrcIpRcvd 1.3.6.1.4.1.3493.2.19.1.1.15
Total number of RIP packets with invalid ip address, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsPktsFrmSelfRcvd 1.3.6.1.4.1.3493.2.19.1.1.16
Total number of RIP packets with receiver being the sender on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfStatsReset 1.3.6.1.4.1.3493.2.19.1.1.17
Writing a 1 in ripIfStatsReset has the effect of clearing current RIP statistics
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfStatsAllGroup 1.3.6.1.4.1.3493.2.19.1.2
OBJECT IDENTIFIER    

ripIfAllResetTime 1.3.6.1.4.1.3493.2.19.1.2.1
Time since system reboot
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

ripIfAllStatsIntfCnt 1.3.6.1.4.1.3493.2.19.1.2.2
Number of interfaces (enabled and disabled) running RIP
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsNbrCnt 1.3.6.1.4.1.3493.2.19.1.2.3
Total number of neighbors of all RIP interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsPktsRcvd 1.3.6.1.4.1.3493.2.19.1.2.4
Total number of RIP packets received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsPktsSent 1.3.6.1.4.1.3493.2.19.1.2.5
Total number of RIP packets sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsReqsRcvd 1.3.6.1.4.1.3493.2.19.1.2.6
Total number of RIP requests received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsReqsSent 1.3.6.1.4.1.3493.2.19.1.2.7
Total number of RIP requests sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsRspsRcvd 1.3.6.1.4.1.3493.2.19.1.2.8
Total number of RIP responses received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsRspsSent 1.3.6.1.4.1.3493.2.19.1.2.9
Total number of RIP responses sent out on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsRteTimouts 1.3.6.1.4.1.3493.2.19.1.2.10
Total number of RIP routes timed out
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsShrtPktsRcvd 1.3.6.1.4.1.3493.2.19.1.2.11
Total number of RIP packets with size less than RIP header size received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsBadVerRcvd 1.3.6.1.4.1.3493.2.19.1.2.12
Total number of RIP packets with version other than RIP version 1 or RIP version 2, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsBadZeroRcvd 1.3.6.1.4.1.3493.2.19.1.2.13
Total number of RIP packets with must be zero fields not set to zero, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsBadSrcPortRcvd 1.3.6.1.4.1.3493.2.19.1.2.14
Total number of RIP packets which did not originate from port 520, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsBadSrcIpRcvd 1.3.6.1.4.1.3493.2.19.1.2.15
Total number of RIP packets with invalid ip address, received on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripIfAllStatsPktsFrmSelfRcvd 1.3.6.1.4.1.3493.2.19.1.2.16
Total number of RIP packets with receiver being the sender on all interfaces
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

basRipIfTable 1.3.6.1.4.1.3493.2.19.1.4
This is used for proprietry interface info.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasRipIfEntry

basRipIfEntry 1.3.6.1.4.1.3493.2.19.1.4.1
Interface configuration entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasRipIfEntry  

ripIfIpAddress 1.3.6.1.4.1.3493.2.19.1.4.1.1
Ip address of the interface running RIP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ripIfAddressLessIf 1.3.6.1.4.1.3493.2.19.1.4.1.2
IfIndex of the interface running RIP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ripIfType 1.3.6.1.4.1.3493.2.19.1.4.1.3
Type of the interface running RIP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ripIfTypeBroadcast(1), ripIfTypeNBMA(2), ripIfTypePointToPoint(3)  

ripIfVersion 1.3.6.1.4.1.3493.2.19.1.4.1.4
What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. ripSendCompat implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripSendVer2 implies multicasting RIP-2 updates. ripSendVer1Demand indicates the use of Demand RIP on a WAN interface under RIP Version 1 rules. ripSendVer2Demand indicates the use of Demand RIP on a WAN interface under Version 2 rules.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ripSendNone(1), ripSendVer1(2), ripSendCompat(3), ripSendVer2(4), ripSendVer1Demand(5), ripSendVer2Demand(6)  

ripIfRecvVer 1.3.6.1.4.1.3493.2.19.1.4.1.5
This indicates which version of RIP updates are to be accepted. Note that ripRcvVer2 and ripRcvVer1and2 implies reception of multicast packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ripRcvVer1(1), ripRcvVer2(2), ripRcvVer1and2(3), ripRcvNone(4)  

ripIfMetric 1.3.6.1.4.1.3493.2.19.1.4.1.6
Value of metric corresponding to this interface. Metric value will be added to all routes leared from this interface
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ripIfAcceptDefault 1.3.6.1.4.1.3493.2.19.1.4.1.7
If ripIfAcceptDefault is TRUE then default routes will be accepted on this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfSilent 1.3.6.1.4.1.3493.2.19.1.4.1.8
If ripIfSilent is TRUE then no RIP updates would be sent of by this interface
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfRecvRoutes 1.3.6.1.4.1.3493.2.19.1.4.1.9
If ripIfRecvRoutes is TRUE then RIP updates received on this interface are disregarded
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfSubnetsOnly 1.3.6.1.4.1.3493.2.19.1.4.1.10
If ripIfSubnetsOnly is TRUE, then
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfSendDefaultOnly 1.3.6.1.4.1.3493.2.19.1.4.1.11
If ripIfSendDefaultOnly is TRUE, RIP update from this interface would consist of only the default route
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfSendDefaultAlso 1.3.6.1.4.1.3493.2.19.1.4.1.12
If ripIfSendDefaultAlso is TRUE, RIP update from this interface would consist of default route along with other routes
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfDfltRouteMetric 1.3.6.1.4.1.3493.2.19.1.4.1.13
This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ripIfSplitHorizon 1.3.6.1.4.1.3493.2.19.1.4.1.14
If ripIfSplitHorizon is TRUE, enables split horizon processing as defined in RFC 1058
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfPoison 1.3.6.1.4.1.3493.2.19.1.4.1.15
In ripIfPoison is TRUE, enables Poison reverse updates on this interface. (Poison reverse is defined in RCF 1058)
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfFlash 1.3.6.1.4.1.3493.2.19.1.4.1.16
if ripIfFlash is TRUE flash updates will be sent out from this interface following a route change
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripAuthOn 1.3.6.1.4.1.3493.2.19.1.4.1.17
If ripAuthOn TRUE enables authentication on this interface. All updates generated from this interface would be authenticated using specified authentication type set by ripIfAuthType
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

ripIfAuthType 1.3.6.1.4.1.3493.2.19.1.4.1.18
The type of Authentication used on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noAuthentication(1), simplePassword(2), md5(3)  

ripIfAuthKeyId 1.3.6.1.4.1.3493.2.19.1.4.1.19
md5 authentication keyid used for this interface. RFC2082 describes md5 authentication and keyids
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

ripIfAuthKey 1.3.6.1.4.1.3493.2.19.1.4.1.20
The value to be used as the Authentication Key whenever the corresponding instance of ripIfAuthType has a value other than noAuthentication. A modification of the corresponding instance of ripIfAuthType does not modify the rip2IfConfAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

ripIfUpdateInterval 1.3.6.1.4.1.3493.2.19.1.4.1.21
Time between 2 RIP updates for this interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripIfUpdateInterPktGap 1.3.6.1.4.1.3493.2.19.1.4.1.22
Time between sending 2 packets of the same RIP update when update is more than 1 packet
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripIfPktsPerUpdate 1.3.6.1.4.1.3493.2.19.1.4.1.23
Maximum number of packets allowed per update on this interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripIfPortDown 1.3.6.1.4.1.3493.2.19.1.4.1.24
Indicates if port on which this interface exists is down.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

ripIfRowStat 1.3.6.1.4.1.3493.2.19.1.4.1.25
Administrative control over, creation and enabling RIP interface
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

basRipNbrTable 1.3.6.1.4.1.3493.2.19.1.3
Neighbor table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BasRipNbrEntry

basRipNbrEntry 1.3.6.1.4.1.3493.2.19.1.3.1
A particular neighbour entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  BasRipNbrEntry  

ripNbrIfIpAddr 1.3.6.1.4.1.3493.2.19.1.3.1.1
Ip address on the RIP interface of which this is a neighbor
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

ripNbrIpAddr 1.3.6.1.4.1.3493.2.19.1.3.1.2
Ip address of the neighbor
Status: current Access: not-accessible
OBJECT-TYPE    
  IpAddress  

ripNbrAddressLessIf 1.3.6.1.4.1.3493.2.19.1.3.1.3
If index of the RIP interface on this this is a neighbor
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripNbrType 1.3.6.1.4.1.3493.2.19.1.3.1.4
Neighbor type is ripNbrTypeConfigured if it is configured on the interface. A neighbor is of type discovered it is not configured and updates from this neighbor are received on this interface
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ripNbrTypeConfigured(1), ripNbrTypeDiscovered(2)  

ripNbrLastUpdate 1.3.6.1.4.1.3493.2.19.1.3.1.5
Time simce last update was received from this neighbor
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

ripNbrTriggerMode 1.3.6.1.4.1.3493.2.19.1.3.1.6
Indicates if the neighbor is triggered or not
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ripNbrRowStatus 1.3.6.1.4.1.3493.2.19.1.3.1.7
Administrative control to creat and delete a neighbor
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus