AtiSwitch-MIB

File: AtiSwitch-MIB.mib (51684 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI

Imported symbols

OBJECT-TYPE Integer32 Counter32
IpAddress TimeTicks DisplayString
RowStatus TruthValue enterprises

Defined Types

MACAddress  
OCTET STRING Size(6)    

BridgeId  
OCTET STRING Size(8)    

Timeout  
Integer32    

AtiswitchNwMgrEntry  
SEQUENCE    
  atiswitchNwMgrIndex INTEGER
  atiswitchNwMgrIpAddr IpAddress

AtiswitchPortEntry  
SEQUENCE    
  atiswitchPortNumber Integer32
  atiswitchPortName DisplayString
  atiswitchPortAutosenseOrHalfDuplex INTEGER
  atiswitchPortLinkState INTEGER
  atiswitchPortDuplexStatus INTEGER
  atiswitchPortSpeed INTEGER
  atiswitchPortState INTEGER
  atiswitchPortFlowControlConfig INTEGER
  atiswitchPortBackPressureConfig INTEGER
  atiswitchPortVlanTagPriorityConfig INTEGER
  atiswitchPortCOSPriorityConfig INTEGER
  atiswitchPortBroadcastConfig INTEGER
  atiswitchPortReset INTEGER

AtiswitchBasicVlanEntry  
SEQUENCE    
  atiswitchBeVlanIndex INTEGER
  atiswitchBeVlanName DisplayString
  atiswitchBeVlanTagId INTEGER
  atiswitchBeVlanTaggedPortMask DisplayString
  atiswitchBeVlanUntaggedPortMask DisplayString
  atiswitchBeVlanMirrorPort INTEGER
  atiswitchBeVlanRowStatus RowStatus

AtiswitchPort2VlanEntry  
SEQUENCE    
  atiswitchPvPortNumber Integer32
  atiswitchPvVlanName DisplayString

AtiswitchEthPortMonEntry  
SEQUENCE    
  atiswitchEthPortMonId Integer32
  atiswitchEthPortMonRxGoodFrames Counter32
  atiswitchEthPortMonTxGoodFrames Counter32
  atiswitchEthPortMonTxTotalBytes Counter32
  atiswitchEthPortMonTxDeferred Counter32
  atiswitchEthPortMonTxCollisions Counter32
  atiswitchEthPortMonTxBroadcastFrames Counter32
  atiswitchEthPortMonTxMulticastFrames Counter32
  atiswitchEthPortMonRxOverruns Counter32

AtiswitchEthPortErrorEntry  
SEQUENCE    
  atiswitchEthPortErrorId Integer32
  atiswitchEthPortErrorRxBadFrames Counter32
  atiswitchEthPortErrorTxTotal Counter32

AtiswitchFwdVlanEntry  
SEQUENCE    
  atiswitchFwdVlanMACAddr MACAddress
  atiswitchFwdVlanVlanId Integer32
  atiswitchFwdVlanAge Integer32
  atiswitchFwdVlanStatus INTEGER
  atiswitchFwdVlanPort Integer32

AtiswitchStaticMACEntry  
SEQUENCE    
  atiswitchStaticMACAddress MACAddress
  atiswitchStaticMACPortNumber INTEGER
  atiswitchStaticMACEntryStatus INTEGER

Defined Values

alliedTelesyn 1.3.6.1.4.1.207
OBJECT IDENTIFIER    

mibObject 1.3.6.1.4.1.207.8
OBJECT IDENTIFIER    

atiSwitchMib 1.3.6.1.4.1.207.8.15
Private MIB for ATI next generation layer 2 switches. This MIB can be used in Windows and UNIX environment
MODULE-IDENTITY    

atiProduct 1.3.6.1.4.1.207.1
OBJECT IDENTIFIER    

swhub 1.3.6.1.4.1.207.1.4
OBJECT IDENTIFIER    

at-8024 1.3.6.1.4.1.207.1.4.66
OBJECT IDENTIFIER    

at-8024GB 1.3.6.1.4.1.207.1.4.67
OBJECT IDENTIFIER    

at-8024M 1.3.6.1.4.1.207.1.4.78
OBJECT IDENTIFIER    

at-8016F-SC 1.3.6.1.4.1.207.1.4.79
OBJECT IDENTIFIER    

at-8026FC 1.3.6.1.4.1.207.1.4.80
OBJECT IDENTIFIER    

at-8016F-MT 1.3.6.1.4.1.207.1.4.82
OBJECT IDENTIFIER    

at-8012M 1.3.6.1.4.1.207.1.4.86
OBJECT IDENTIFIER    

at-8088-SC 1.3.6.1.4.1.207.1.4.87
OBJECT IDENTIFIER    

at-8088-MT 1.3.6.1.4.1.207.1.4.88
OBJECT IDENTIFIER    

at-8026T 1.3.6.1.4.1.207.1.4.89
OBJECT IDENTIFIER    

atiswitchSysGroup 1.3.6.1.4.1.207.8.15.1
OBJECT IDENTIFIER    

atiswitchConfigGroup 1.3.6.1.4.1.207.8.15.2
OBJECT IDENTIFIER    

atiswitchPortGroup 1.3.6.1.4.1.207.8.15.3
OBJECT IDENTIFIER    

atiswitchVlanConfigGroup 1.3.6.1.4.1.207.8.15.4
OBJECT IDENTIFIER    

atiswitchEthernetStatsGroup 1.3.6.1.4.1.207.8.15.5
OBJECT IDENTIFIER    

atiswitchEthPortStatsGroup 1.3.6.1.4.1.207.8.15.6
OBJECT IDENTIFIER    

atiswitchFwdVlanGroup 1.3.6.1.4.1.207.8.15.7
OBJECT IDENTIFIER    

atiswitchStaticMACGroup 1.3.6.1.4.1.207.8.15.8
OBJECT IDENTIFIER    

atiswitchTraps 1.3.6.1.4.1.207.8.15.9
OBJECT IDENTIFIER    

atiswitchProductType 1.3.6.1.4.1.207.8.15.1.1
This object identifies the Product Type.
OBJECT-TYPE    
  INTEGER at8024(1), at8024GB(2), at8024M(3), at8016F-SC(4), at8016F-MT(5), at8026FC(6), at8012M(7), at8088-SC(8), at8088-MT(9), at8026T(10), other(20)  

atiswitchBasePortCount 1.3.6.1.4.1.207.8.15.1.2
This object determines the number of base Ethernet ports in the switch.
OBJECT-TYPE    
  Integer32  

atiswitchUplinkPortCount 1.3.6.1.4.1.207.8.15.1.3
This object determines the total number of uplink ports available in the switch.
OBJECT-TYPE    
  Integer32  

atiswitchReset 1.3.6.1.4.1.207.8.15.1.4
Setting this object to switchreset will cause the switch to perform a soft reboot. Setting this object to switch_no_reset will have no effect.
OBJECT-TYPE    
  INTEGER switchnoreset(1), switchreset(2)  

atiswitchUplink1Type 1.3.6.1.4.1.207.8.15.1.5
This object returns the MDA (Media Dependant Adapter) type of Uplink port 1. If there is no uplink installed it will return a value of none.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2), none(3)  

atiswitchUplink2Type 1.3.6.1.4.1.207.8.15.1.6
This object returns the MDA (Media Dependant Adapter) type of Uplink port 2. If there is no uplink installed it will return a value of none.
OBJECT-TYPE    
  INTEGER copper(1), fiber(2), none(3)  

atiswitchSwGroup 1.3.6.1.4.1.207.8.15.1.7
OBJECT IDENTIFIER    

atiswitchIpGroup 1.3.6.1.4.1.207.8.15.1.8
OBJECT IDENTIFIER    

atiswitchNMGroup 1.3.6.1.4.1.207.8.15.1.9
OBJECT IDENTIFIER    

atiswitchSw 1.3.6.1.4.1.207.8.15.1.7.1
Identifies the name of the software running in the switch.
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiswitchSwVersion 1.3.6.1.4.1.207.8.15.1.7.2
Identifies the version number of the software running in the switch.
OBJECT-TYPE    
  DisplayString Size(0..255)  

atiswitchConfigIpAddress 1.3.6.1.4.1.207.8.15.1.8.1
IP address of the switch.
OBJECT-TYPE    
  IpAddress  

atiswitchConfigSubMask 1.3.6.1.4.1.207.8.15.1.8.2
Subnet mask of the switch.
OBJECT-TYPE    
  IpAddress  

atiswitchConfigRouting 1.3.6.1.4.1.207.8.15.1.8.3
Gateway address for the switch.
OBJECT-TYPE    
  IpAddress  

atiswitchIPAddressStatus 1.3.6.1.4.1.207.8.15.1.8.4
The IP Address can be obtained/configured through different ways - through DHCP, through Bootp or through a static configuration. This object specifies how the IP address, subnet mask and the gateway address currently used by the switch was configured/obtained.
OBJECT-TYPE    
  INTEGER fromDhcp(1), fromBootp(2), fromStatic(3)  

atiswitchDNServer 1.3.6.1.4.1.207.8.15.1.8.5
This attribute specifies the DNS server address for the switch.
OBJECT-TYPE    
  IpAddress  

atiswitchDefaultDomainName 1.3.6.1.4.1.207.8.15.1.8.6
This attribute specifies the default Domain Name for the switch.
OBJECT-TYPE    
  DisplayString  

atiswitchNwMgrTable 1.3.6.1.4.1.207.8.15.1.9.1
This table contains the list of IP Addresses (management stations) to which SNMP Traps are sent. The maximum number of entries in the table is 4.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchNwMgrEntry

atiswitchNwMgrEntry 1.3.6.1.4.1.207.8.15.1.9.1.1
An entry of atiswitchNwMgrTable specifying each management station to which a SNMP trap is sent.
OBJECT-TYPE    
  AtiswitchNwMgrEntry  

atiswitchNwMgrIndex 1.3.6.1.4.1.207.8.15.1.9.1.1.1
The index for the management station entry.
OBJECT-TYPE    
  INTEGER 1..4  

atiswitchNwMgrIpAddr 1.3.6.1.4.1.207.8.15.1.9.1.1.2
The IP address of the management station.
OBJECT-TYPE    
  IpAddress  

atiswitchMirrorState 1.3.6.1.4.1.207.8.15.2.1
If the attribute is set to one of the first three values, then port mirroring is enabled. If disabled, port operation works nomally. No traffic gets mirrored.
OBJECT-TYPE    
  INTEGER receive(1), transmit(2), both(3), disabled(4)  

atiswitchMirroringSourcePorts 1.3.6.1.4.1.207.8.15.2.2
This attribute identifies the source ports which are mirrored. All packets received, transmitted or both on these ports gets mirrored on to the destination port. It's value can be a single port number or a contiguous range of ports (eg. 1-5). This attribute will have an empty string when port mirroring is disabled.
OBJECT-TYPE    
  DisplayString  

atiswitchMirroringDestinationPort 1.3.6.1.4.1.207.8.15.2.3
This attribute identifies the destination port number which mirrors the source port. All packets received, transmitted or both on the source port gets mirrored on to this port. This attribute will have the value 0 when port mirroring is disabled.
OBJECT-TYPE    
  Integer32  

atiswitchSecurityConfig 1.3.6.1.4.1.207.8.15.2.4
This attribute is a port security configuration object. Setting the value to 'disabled' will allow the switch to learn new MAC addresses as they come in. In enabledLearningLocked mode, the device will stop learning new addresses and the old addresses that the device has learned will be locked. In enabledLimited mode, only a limited number of addresses will be learned. In enabledSecured mode, the administrator is responsible for entering the MAC addresses manually. By doing this, the administrator knows exactly who is connecting to the switch.
OBJECT-TYPE    
  INTEGER disabled(1), enabledLearningLocked(2), enabledLimited(3), enabledSecured(4)  

atiswitchSecurityAction 1.3.6.1.4.1.207.8.15.2.5
This attribute identifies the security action taken in case of an intruder detected.
OBJECT-TYPE    
  INTEGER sendTrapOnly(1), disablePortOnly(2), disablePortAndSendTrap(3), doNothing(4)  

atiswitchPortTable 1.3.6.1.4.1.207.8.15.3.1
This table contains all the type of devices supported by this MIB.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchPortEntry

atiswitchPortEntry 1.3.6.1.4.1.207.8.15.3.1.1
The device type in the DeviceTable.
OBJECT-TYPE    
  AtiswitchPortEntry  

atiswitchPortNumber 1.3.6.1.4.1.207.8.15.3.1.1.1
The object identifies the port of the switch.
OBJECT-TYPE    
  INTEGER 1..65535  

atiswitchPortName 1.3.6.1.4.1.207.8.15.3.1.1.2
This attribute associates a user defined string name with the port.
OBJECT-TYPE    
  DisplayString Size(0..20)  

atiswitchPortAutosenseOrHalfDuplex 1.3.6.1.4.1.207.8.15.3.1.1.3
This object allows an admin request to configure whether this port is set to autosense or one of the different speed/duplex combinations.
OBJECT-TYPE    
  INTEGER portAutoSense(1), forceHalfDuplex-10M(2), forceHalfDuplex-100M(3), forceFullDuplex-10M(4), forceFullDuplex-100M(5), forceHalfDuplex-1G(6), forceFullDuplex-1G(7)  

atiswitchPortLinkState 1.3.6.1.4.1.207.8.15.3.1.1.4
This attribute allows an admin request to read the status of link state on this port.
OBJECT-TYPE    
  INTEGER online(1), offline(2)  

atiswitchPortDuplexStatus 1.3.6.1.4.1.207.8.15.3.1.1.5
This object allows an admin request to read the status of Duplex on this port.
OBJECT-TYPE    
  INTEGER fullDuplex(1), halfDuplex(2), autosense(3)  

atiswitchPortSpeed 1.3.6.1.4.1.207.8.15.3.1.1.6
This attribute allows an admin request to read the speed of this port.
OBJECT-TYPE    
  INTEGER tenMBits(1), hundredMBits(2), gigaBits(3), unknown(4)  

atiswitchPortState 1.3.6.1.4.1.207.8.15.3.1.1.7
This attribute allows an admin request to disable or enable communications on this port. It also responds with the status of the port. Except enabled(1) and disabled(2), all values are read-only status.
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2), blocking(3), listening(4), learning(5), unknown(6)  

atiswitchPortFlowControlConfig 1.3.6.1.4.1.207.8.15.3.1.1.8
This per port attribute determines whether the port has flow control enabled or not. By default, flow control is disabled.
OBJECT-TYPE    
  INTEGER disable(1), transmit-only(2), receive-only(3), transmit-and-receive(4), unknown(5)  

atiswitchPortBackPressureConfig 1.3.6.1.4.1.207.8.15.3.1.1.9
This per-port attribute describes whether the port identified has Back Pressure Enabled or not.By default, Back Pressure is Disabled.
OBJECT-TYPE    
  INTEGER disable(1), enable(2), unknown(3)  

atiswitchPortVlanTagPriorityConfig 1.3.6.1.4.1.207.8.15.3.1.1.10
This per-port attribute allows the configuration of the Tag Priority to be Override or use the Tag Priority. By Default, all ports use Vlan Tag priority.
OBJECT-TYPE    
  INTEGER use-vlan-priority(1), override-vlan-priority(2)  

atiswitchPortCOSPriorityConfig 1.3.6.1.4.1.207.8.15.3.1.1.11
This per-port attribute allows the configuration of the priority of the port. There are 8 priorities as per the IEEE standard with 0 being the lowest priority and 7 the highest. In a switch environment, ports with higher priority has it's to and from traffic given higher priority when compared with those with lower priority.
OBJECT-TYPE    
  INTEGER 0..7  

atiswitchPortBroadcastConfig 1.3.6.1.4.1.207.8.15.3.1.1.12
This per-port attribute determines if broadcast packets received should be discarded or processed. By default, they will be processed.
OBJECT-TYPE    
  INTEGER discard-broadcasts(1), do-not-discard-broadcasts(2)  

atiswitchPortReset 1.3.6.1.4.1.207.8.15.3.1.1.13
This per-port attribute resets the port to the original default configuration.This can prove useful in situations where a port is experiencing a problem making a valid connection to the end node. Setting the value to 'no-reset' has no effect.
OBJECT-TYPE    
  INTEGER reset(1), no-reset(2)  

atiswitchBasicVlanTable 1.3.6.1.4.1.207.8.15.4.1
Table of Virtual LANs configured in the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchBasicVlanEntry

atiswitchBasicVlanEntry 1.3.6.1.4.1.207.8.15.4.1.1
An entry describing the configured Virtual LAN.
OBJECT-TYPE    
  AtiswitchBasicVlanEntry  

atiswitchBeVlanIndex 1.3.6.1.4.1.207.8.15.4.1.1.1
Index of the Virtual LAN entry. Maximum number of Virtual LANs in 8024/8024GB is 32.
OBJECT-TYPE    
  INTEGER 1..64  

atiswitchBeVlanName 1.3.6.1.4.1.207.8.15.4.1.1.2
Name of the Virtual LAN.
OBJECT-TYPE    
  DisplayString Size(0..20)  

atiswitchBeVlanTagId 1.3.6.1.4.1.207.8.15.4.1.1.3
VId of the Virtual LAN as stored in the tag information header in accordance with 802.1q specification.
OBJECT-TYPE    
  INTEGER 1..4095  

atiswitchBeVlanTaggedPortMask 1.3.6.1.4.1.207.8.15.4.1.1.4
List of tagged ports in the Virtual LAN.
OBJECT-TYPE    
  DisplayString  

atiswitchBeVlanUntaggedPortMask 1.3.6.1.4.1.207.8.15.4.1.1.5
List of untagged ports in the Virtual LAN.
OBJECT-TYPE    
  DisplayString  

atiswitchBeVlanMirrorPort 1.3.6.1.4.1.207.8.15.4.1.1.6
Port number on which all Virtual LAN traffic is mirrored on. By default the value is 0 indicating no port mirroring.
OBJECT-TYPE    
  INTEGER 0..65535  

atiswitchBeVlanRowStatus 1.3.6.1.4.1.207.8.15.4.1.1.7
Indicates the status of this entry. This object is used to create, modify or delete Virtual LAN entries as per the RowStatus specification of SMIv2. There are two ways to create a Virtual LAN entry - CreateAndGo (Used when all objects of the entry are set at one go) and CreateAndWait (Used when individual objects are set independently). CreateAndGo method: Assign values to all objects of the Virtual LAN entry. Set this object to CreateAndGo(4). CreateAndWait method: Set this object to CreateAndWait(5). Set individual object entries. When all other entries are set, set this object to Active(1). To delete a Virtual LAN entry, set this object to destroy(6).
OBJECT-TYPE    
  RowStatus  

atiswitchPort2VlanTable 1.3.6.1.4.1.207.8.15.4.2
Table of per port Virtual LAN configuration.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchPort2VlanEntry

atiswitchPort2VlanEntry 1.3.6.1.4.1.207.8.15.4.2.1
An entry in the table, containing per port Virtual LAN information.
OBJECT-TYPE    
  AtiswitchPort2VlanEntry  

atiswitchPvPortNumber 1.3.6.1.4.1.207.8.15.4.2.1.1
This object identifies the port on the switch.
OBJECT-TYPE    
  INTEGER 1..65535  

atiswitchPvVlanName 1.3.6.1.4.1.207.8.15.4.2.1.2
This object identifies the Virtual LAN name to which the port belongs to.
OBJECT-TYPE    
  DisplayString  

atiswitchVlanMode 1.3.6.1.4.1.207.8.15.4.3
This object specifies the current VLAN mode. Setting this object to 'user-configured (1)' allows the manager to create, delete and modify VLANs using 'atiswitchBasicVlanTable'. Setting this object to 'multiple (2)' or 'multiple-802-1Q (3)'will result in the creation of predefined VLANs. Setting these values requires that the object 'atiswitchVlanUplinkVlanPort' also be set in the same SET request. Note that SET operations on any object under 'atiswitchBasicVlanTable' are not allowed in these two modes.
OBJECT-TYPE    
  INTEGER user-configured(1), multiple(2), multiple-802-1Q(3)  

atiswitchVlanUplinkVlanPort 1.3.6.1.4.1.207.8.15.4.4
This object specifies the Uplink VLAN Port ID used while creating pre-configured VLANs. This object can be set to any valid Port ID present on the switch. Note that a SET operation on the object 'atiswitchVlanMode' to the value 'multiple (2)' or 'multiple-802-1Q (3)' should always be accompanied by a SET operation on this object in the same SET request. By default this object is set to 0 when 'atiswitchVlanMode' is set to 'user-configured (1)'.
OBJECT-TYPE    
  Integer32  

atiswitchEthMonStats 1.3.6.1.4.1.207.8.15.5.1
OBJECT IDENTIFIER    

atiswitchEthErrorStats 1.3.6.1.4.1.207.8.15.5.2
OBJECT IDENTIFIER    

atiswitchEthMonRxGoodFrames 1.3.6.1.4.1.207.8.15.5.1.1
The total number of good frames received on the switch.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxGoodFrames 1.3.6.1.4.1.207.8.15.5.1.2
The total number of good frames that has been transimitted by the switch.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxTotalBytes 1.3.6.1.4.1.207.8.15.5.1.3
The total number of bytes transimitted from the switch.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxDeferred 1.3.6.1.4.1.207.8.15.5.1.4
The number of times a transmission attempt failed because of the medium being busy.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxCollisions 1.3.6.1.4.1.207.8.15.5.1.5
The total number of collisions detected while transmitting from the switch.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxBroadcastFrames 1.3.6.1.4.1.207.8.15.5.1.6
The total number of Transmit Broadcast Frames while switching.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonTxMulticastFrames 1.3.6.1.4.1.207.8.15.5.1.7
The total number of Transmit Multicast frames while switching.
OBJECT-TYPE    
  Counter32  

atiswitchEthMonRxOverruns 1.3.6.1.4.1.207.8.15.5.1.8
The total number of Received Overrun Frames while switching.
OBJECT-TYPE    
  Counter32  

atiswitchEthErrorCRC 1.3.6.1.4.1.207.8.15.5.2.1
The total number of CRC errors on received packets.
OBJECT-TYPE    
  Counter32  

atiswitchEthErrorAlignment 1.3.6.1.4.1.207.8.15.5.2.2
The total number of packets received that has alignment errors.
OBJECT-TYPE    
  Counter32  

atiswitchEthErrorRxBadFrames 1.3.6.1.4.1.207.8.15.5.2.3
The total number of bad frames received.
OBJECT-TYPE    
  Counter32  

atiswitchEthErrorLateCollision 1.3.6.1.4.1.207.8.15.5.2.4
The number of times collision was detected in the switch.
OBJECT-TYPE    
  Counter32  

atiswitchEthErrorTxTotal 1.3.6.1.4.1.207.8.15.5.2.5
Total number of errors resulting from transmit operations.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonStats 1.3.6.1.4.1.207.8.15.6.1
OBJECT IDENTIFIER    

atiswitchEthPortError 1.3.6.1.4.1.207.8.15.6.2
OBJECT IDENTIFIER    

atiswitchEthPortMonTable 1.3.6.1.4.1.207.8.15.6.1.1
A list of statistics entry for each port.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchEthPortMonEntry

atiswitchEthPortMonEntry 1.3.6.1.4.1.207.8.15.6.1.1.1
A colletion of statistics kept for a particular port.
OBJECT-TYPE    
  AtiswitchEthPortMonEntry  

atiswitchEthPortMonId 1.3.6.1.4.1.207.8.15.6.1.1.1.1
Port number.
OBJECT-TYPE    
  INTEGER 1..65535  

atiswitchEthPortMonRxGoodFrames 1.3.6.1.4.1.207.8.15.6.1.1.1.2
The total number of good frames received on this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxGoodFrames 1.3.6.1.4.1.207.8.15.6.1.1.1.3
The total number of good frames transmitted from this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxTotalBytes 1.3.6.1.4.1.207.8.15.6.1.1.1.4
The total number of bytes transmitted from this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxDeferred 1.3.6.1.4.1.207.8.15.6.1.1.1.5
This is the count of first time Transmission attempt which failed on an interface due to medium being busy.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxCollisions 1.3.6.1.4.1.207.8.15.6.1.1.1.6
The total number of collisions while switching on an interface.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxBroadcastFrames 1.3.6.1.4.1.207.8.15.6.1.1.1.7
The total number of broadcast frames transmitted from this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonTxMulticastFrames 1.3.6.1.4.1.207.8.15.6.1.1.1.8
The total number of multicast frames transmitted from this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortMonRxOverruns 1.3.6.1.4.1.207.8.15.6.1.1.1.9
The total number of over sized frames received on this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortErrorTable 1.3.6.1.4.1.207.8.15.6.2.1
A list of statistics entries.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchEthPortErrorEntry

atiswitchEthPortErrorEntry 1.3.6.1.4.1.207.8.15.6.2.1.1
A collection of statistics kept for a particular port.
OBJECT-TYPE    
  AtiswitchEthPortErrorEntry  

atiswitchEthPortErrorId 1.3.6.1.4.1.207.8.15.6.2.1.1.1
Port number.
OBJECT-TYPE    
  INTEGER 1..65535  

atiswitchEthPortErrorRxBadFrames 1.3.6.1.4.1.207.8.15.6.2.1.1.2
Total number of bad Frames received on this port.
OBJECT-TYPE    
  Counter32  

atiswitchEthPortErrorTxTotal 1.3.6.1.4.1.207.8.15.6.2.1.1.3
Total number of errors resulting from transmit operations.
OBJECT-TYPE    
  Counter32  

atiswitchFwdVlanTable 1.3.6.1.4.1.207.8.15.7.1
This table associates MAC addresses (as stored in the forwarding table of the switch) to the Virtual LAN to which it belongs.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchFwdVlanEntry

atiswitchFwdVlanEntry 1.3.6.1.4.1.207.8.15.7.1.1
Entry in the atiswitchFwdVlanTable.
OBJECT-TYPE    
  AtiswitchFwdVlanEntry  

atiswitchFwdVlanMACAddr 1.3.6.1.4.1.207.8.15.7.1.1.1
A MAC address from the forwarding table of the switch.
OBJECT-TYPE    
  MACAddress  

atiswitchFwdVlanVlanId 1.3.6.1.4.1.207.8.15.7.1.1.2
The Virtual LAN to which atiswitchFwdVlanMACAddr belongs to.
OBJECT-TYPE    
  Integer32  

atiswitchFwdVlanAge 1.3.6.1.4.1.207.8.15.7.1.1.3
Current age of the MAC Address in the forwarding table - 0 indicates it is still active, 1 indicates that the address has aged out.
OBJECT-TYPE    
  Integer32  

atiswitchFwdVlanStatus 1.3.6.1.4.1.207.8.15.7.1.1.4
Status of the MAC address - inactive (1): It is no longer valid e.g, it was learned and has since aged out, but has not yet been flushed from the table, active (2): Learned or statically assigned and currently in use and other (3): Neither of the other two.
OBJECT-TYPE    
  INTEGER inactive(1), active(2), other(3)  

atiswitchFwdVlanPort 1.3.6.1.4.1.207.8.15.7.1.1.5
Either the value 0, or the port number of the port on which a frame having a source address equal to the atiswitchFwdVlanMACAddr has been seen. A value of 0 indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.
OBJECT-TYPE    
  Integer32  

atiswitchStaticMACTable 1.3.6.1.4.1.207.8.15.8.1
This tables lists MAC addresses lexicographically from the static table which binds MAC address to ports on the switch.
OBJECT-TYPE    
  SEQUENCE OF  
    AtiswitchStaticMACEntry

atiswitchStaticMACEntry 1.3.6.1.4.1.207.8.15.8.1.1
Entry in the atiswitchStaticMACTable.
OBJECT-TYPE    
  AtiswitchStaticMACEntry  

atiswitchStaticMACAddress 1.3.6.1.4.1.207.8.15.8.1.1.1
This object identifies the MAC address associated with Static MAC table.
OBJECT-TYPE    
  MACAddress  

atiswitchStaticMACPortNumber 1.3.6.1.4.1.207.8.15.8.1.1.2
This object identifies the port for which the MAC address is associated statically in the MAC Table.
OBJECT-TYPE    
  INTEGER 1..65535  

atiswitchStaticMACEntryStatus 1.3.6.1.4.1.207.8.15.8.1.1.3
The status of this entry. The meanings of the values are: valid(1) : This entry is valid. invalid(2) : This entry is no longer valid, but has not yet been flushed from the table.
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

atiswitchFanStopTrap 1.3.6.1.4.1.207.8.15.9.1
Trap sent when an error in the fan operation is detected.
NOTIFICATION-TYPE    

atiswitchTemperatureAbnormalTrap 1.3.6.1.4.1.207.8.15.9.2
Trap sent when the temperature of the switch is abnormal.
NOTIFICATION-TYPE