AdaptecArrayController-MIB

File: AdaptecArrayController-MIB.mib (71542 bytes)

Imported modules

RFC1155-SMI

RFC-1212

RFC1213-MIB

Imported symbols

enterprises

OBJECT-TYPE

DisplayString

Defined Types

AdaptecArrayControllerAdapterEntry
SEQUENCE
	adaptecArrayControllerAdapterIndex	INTEGER
	adaptecArrayControllerAdapterDescription	DisplayString
	adaptecArrayControllerAdapterType	DisplayString
	adaptecArrayControllerAdapterVersion	DisplayString
	adaptecArrayControllerAdapterChannelCount	INTEGER
	adaptecArrayControllerAdapterStatus	INTEGER
	adaptecArrayControllerAdapterBiosVersion	DisplayString
	adaptecArrayControllerAdapterKernelVersion	DisplayString
	adaptecArrayControllerAdapterMonitorVersion	DisplayString
	adaptecArrayControllerAdapterHardwareVersion	DisplayString
	adaptecArrayControllerAdapterTotalMemory	INTEGER
	adaptecArrayControllerAdapterProgramMemory	INTEGER
	adaptecArrayControllerAdapterBufferMemory	INTEGER

AdaptecArrayControllerContainerEntry
SEQUENCE
	adaptecArrayControllerContIndex	INTEGER
	adaptecArrayControllerContAdapterIndex	INTEGER
	adaptecArrayControllerContNumber	INTEGER
	adaptecArrayControllerContSize	INTEGER
	adaptecArrayControllerContMountPoint	DisplayString
	adaptecArrayControllerContType	DisplayString
	adaptecArrayControllerContUsage	DisplayString
	adaptecArrayControllerContStatus	INTEGER
	adaptecArrayControllerContStripeSize	INTEGER

AdaptecArrayControllerDeviceEntry
SEQUENCE
	adaptecArrayControllerDevIndex	INTEGER
	adaptecArrayControllerDevAdapterIndex	INTEGER
	adaptecArrayControllerDevChannelId	INTEGER
	adaptecArrayControllerDevId	INTEGER
	adaptecArrayControllerDevLogicalNumber	INTEGER
	adaptecArrayControllerDevType	INTEGER
	adaptecArrayControllerDevVendor	DisplayString
	adaptecArrayControllerDevProduct	DisplayString
	adaptecArrayControllerDevRevision	DisplayString
	adaptecArrayControllerDevBlocks	INTEGER
	adaptecArrayControllerDevBytesPerBlock	INTEGER
	adaptecArrayControllerDevUsage	DisplayString
	adaptecArrayControllerDevStatus	INTEGER

AdaptecArrayControllerContainerToDeviceEntry
SEQUENCE
	adaptecArrayControllerContainerToDeviceIndex	INTEGER
	adaptecArrayControllerCDAdapterIndex	INTEGER
	adaptecArrayControllerContainerIndex	INTEGER
	adaptecArrayControllerDeviceIndex	INTEGER
	adaptecArrayControllerPartitionOffsetLSW	INTEGER
	adaptecArrayControllerPartitionOffsetMSW	INTEGER
	adaptecArrayControllerPartitionSizeLSW	INTEGER
	adaptecArrayControllerPartitionSizeMSW	INTEGER

AdaptecArrayControllerEnclosureEntry
SEQUENCE
	adaptecArrayControllerEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureAdapterIndex	INTEGER
	adaptecArrayControllerEnclosureProcessorId	INTEGER
	adaptecArrayControllerEnclosureType	INTEGER
	adaptecArrayControllerEnclosureNumberFans	INTEGER
	adaptecArrayControllerEnclosureNumberPowerSupplies	INTEGER
	adaptecArrayControllerEnclosureNumberSlots	INTEGER
	adaptecArrayControllerEnclosureDoorLock	INTEGER
	adaptecArrayControllerEnclosureNumberTemperatureSensors	INTEGER
	adaptecArrayControllerEnclosureSpeaker	INTEGER
	adaptecArrayControllerEnclosureBootTimeDiagnostic	INTEGER
	adaptecArrayControllerEnclosureVendor	DisplayString
	adaptecArrayControllerEnclosureProduct	DisplayString
	adaptecArrayControllerEnclosureRevision	DisplayString
	adaptecArrayControllerEnclosureIdLow	INTEGER
	adaptecArrayControllerEnclosureIdHigh	INTEGER
	adaptecArrayControllerEnclosureStandardRevision	DisplayString
	adaptecArrayControllerEnclosurePowerOnTime	INTEGER
	adaptecArrayControllerEnclosurePowerCycles	INTEGER
	adaptecArrayControllerEnclosureSpeakerStatus	INTEGER
	adaptecArrayControllerEnclosureOverTemperature	INTEGER

AdaptecArrayControllerEnclosureFanEntry
SEQUENCE
	adaptecArrayControllerEnclosureFanIndex	INTEGER
	adaptecArrayControllerEnclosureFanEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureFanStatus	INTEGER

AdaptecArrayControllerEnclosurePowerSupplyEntry
SEQUENCE
	adaptecArrayControllerEnclosurePowerSupplyIndex	INTEGER
	adaptecArrayControllerEnclosurePowerSupplyEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosurePowerSupplyStatus	INTEGER

AdaptecArrayControllerEnclosureDoorLockEntry
SEQUENCE
	adaptecArrayControllerEnclosureDoorLockIndex	INTEGER
	adaptecArrayControllerEnclosureDoorLockEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureDoorLockSlot	INTEGER
	adaptecArrayControllerEnclosureDoorLockStatus	INTEGER

AdaptecArrayControllerEnclosureTemperatureSensorEntry
SEQUENCE
	adaptecArrayControllerEnclosureTemperatureSensorIndex	INTEGER
	adaptecArrayControllerEnclosureTemperatureSensorEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureTemperatureSensorOverTemperature	INTEGER
	adaptecArrayControllerEnclosureTemperatureSensorDegrees	INTEGER

AdaptecArrayControllerEnclosureScsiIdEntry
SEQUENCE
	adaptecArrayControllerEnclosureScsiIdIndex	INTEGER
	adaptecArrayControllerEnclosureScsiIdEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureScsiIdSlot	INTEGER
	adaptecArrayControllerEnclosureChannelId	INTEGER
	adaptecArrayControllerEnclosureScsiId	INTEGER
	adaptecArrayControllerEnclosureLunId	INTEGER

AdaptecArrayControllerEnclosureDeviceInsertionEntry
SEQUENCE
	adaptecArrayControllerEnclosureDeviceInsertionIndex	INTEGER
	adaptecArrayControllerEnclosureDeviceInsertionEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureDeviceInsertionSlot	INTEGER
	adaptecArrayControllerEnclosureDeviceInsertions	INTEGER

AdaptecArrayControllerEnclosureSlotStatusEntry
SEQUENCE
	adaptecArrayControllerEnclosureSlotStatusIndex	INTEGER
	adaptecArrayControllerEnclosureSlotStatusEnclosureIndex	INTEGER
	adaptecArrayControllerEnclosureSlotStatusSlot	INTEGER
	adaptecArrayControllerEnclosureSlotStatus	INTEGER

Defined Values

adaptec		1.3.6.1.4.1.795
OBJECT IDENTIFIER

raidproducts		1.3.6.1.4.1.795.10
OBJECT IDENTIFIER

aac		1.3.6.1.4.1.795.10.1
OBJECT IDENTIFIER

aac-hpn		1.3.6.1.4.1.795.10.1.50
OBJECT IDENTIFIER

adaptecArrayControllerSoftwareVersion		1.3.6.1.4.1.795.10.1.50.1
Version information for the Adaptec Array Controller Software Suite.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterNumber		1.3.6.1.4.1.795.10.1.50.2
The Number of Adaptec Array Controllers present in the system.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerAdapterTable		1.3.6.1.4.1.795.10.1.50.3
A list of Adaptec Array Controller entries. The number of entries is given by AdaptecArrayControllerAdapterNumber.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerAdapterEntry

adaptecArrayControllerContainerTable		1.3.6.1.4.1.795.10.1.50.4
A list of Adaptec Array Controller Container Entries. There will one entry in this table for each container on the host.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerContainerEntry

adaptecArrayControllerDeviceTable		1.3.6.1.4.1.795.10.1.50.5
A list of devices that are attached to Adaptec Array Controllers that are connected to this host.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerDeviceEntry

adaptecArrayControllerContainerToDeviceTable		1.3.6.1.4.1.795.10.1.50.6
A table used to correlate physical devices to containers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerContainerToDeviceEntry

adaptecArrayControllerEnclosureTable		1.3.6.1.4.1.795.10.1.50.20
A list of enclosures that are attached to Adaptec Array Controllers on this host.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureEntry

adaptecArrayControllerEnclosureFanTable		1.3.6.1.4.1.795.10.1.50.21
A list of enclosure fans and their status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureFanEntry

adaptecArrayControllerEnclosurePowerSupplyTable		1.3.6.1.4.1.795.10.1.50.22
A list of enclosure power supplies and their status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosurePowerSupplyEntry

adaptecArrayControllerEnclosureDoorLockTable		1.3.6.1.4.1.795.10.1.50.23
A list of enclosure door locks and their status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureDoorLockEntry

adaptecArrayControllerEnclosureTemperatureSensorTable		1.3.6.1.4.1.795.10.1.50.24
A list of enclosure temperature sensors and their status.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureTemperatureSensorEntry

adaptecArrayControllerEnclosureScsiIdTable		1.3.6.1.4.1.795.10.1.50.25
A list of enclosure SCSI Ids by slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureScsiIdEntry

adaptecArrayControllerEnclosureDeviceInsertionTable		1.3.6.1.4.1.795.10.1.50.26
A list of enclosure device insertion counts by slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureDeviceInsertionEntry

adaptecArrayControllerEnclosureSlotStatusTable		1.3.6.1.4.1.795.10.1.50.27
A list of enclosure statuses by slot.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AdaptecArrayControllerEnclosureSlotStatusEntry

adaptecArrayControllerAdapterEntry		1.3.6.1.4.1.795.10.1.50.3.1
Descriptive and Status Information for an Adaptec Array Controller.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerAdapterEntry

adaptecArrayControllerAdapterIndex		1.3.6.1.4.1.795.10.1.50.3.1.1
A unique index into the AdaptecArrayControllerAdapterTable. This ranges between 1 and the value of AdaptecArrayControllerAdapterNumber.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerAdapterDescription		1.3.6.1.4.1.795.10.1.50.3.1.2
The Adaptec Array Controller description for this adapter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterType		1.3.6.1.4.1.795.10.1.50.3.1.3
The model name of this Adaptec Array Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterVersion		1.3.6.1.4.1.795.10.1.50.3.1.4
The hardware and software version string for this Adaptec Array Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterChannelCount		1.3.6.1.4.1.795.10.1.50.3.1.5
The number of channels supported by this Adaptec Array Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerAdapterStatus		1.3.6.1.4.1.795.10.1.50.3.1.6
The status of the controller. This status reflects the status of all containers and devices connected to the controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerAdapterBiosVersion		1.3.6.1.4.1.795.10.1.50.3.1.7
The BIOS software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterKernelVersion		1.3.6.1.4.1.795.10.1.50.3.1.8
The kernel software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterMonitorVersion		1.3.6.1.4.1.795.10.1.50.3.1.9
The monitor software version.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterHardwareVersion		1.3.6.1.4.1.795.10.1.50.3.1.10
The hardware version of the controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerAdapterTotalMemory		1.3.6.1.4.1.795.10.1.50.3.1.11
The total amount of memory present in the controller expressed in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerAdapterProgramMemory		1.3.6.1.4.1.795.10.1.50.3.1.12
The total amount of program memory present in the controller expressed in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerAdapterBufferMemory		1.3.6.1.4.1.795.10.1.50.3.1.13
The total amount of buffer memory present in the controller expressed in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContainerEntry		1.3.6.1.4.1.795.10.1.50.4.1
Descriptive and status information for containers hosted by Adaptec Array Controller.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerContainerEntry

adaptecArrayControllerContIndex		1.3.6.1.4.1.795.10.1.50.4.1.1
An internal index used to identify this container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContAdapterIndex		1.3.6.1.4.1.795.10.1.50.4.1.2
An index into the AdaptecArrayControllerAdapterTable that specified the AAC Controller to which this container belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContNumber		1.3.6.1.4.1.795.10.1.50.4.1.3
An AAC container ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContSize		1.3.6.1.4.1.795.10.1.50.4.1.4
The size of the container in megabytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContMountPoint		1.3.6.1.4.1.795.10.1.50.4.1.5
A string representing drive letters and mount points for the container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerContType		1.3.6.1.4.1.795.10.1.50.4.1.6
A string representing the container type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerContUsage		1.3.6.1.4.1.795.10.1.50.4.1.7
A string representing the container's usage.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerContStatus		1.3.6.1.4.1.795.10.1.50.4.1.8
The current status of the container. If a container with a redundant container type is no longer redundant, its status will be marked as nonCritical. If the container is no longer on-line, its status will be marked as critical.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerContStripeSize		1.3.6.1.4.1.795.10.1.50.4.1.9
The stripe or chunk size of the container in bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDeviceEntry		1.3.6.1.4.1.795.10.1.50.5.1
Descriptive and status information for devices connected to Adaptec Array Controllers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerDeviceEntry

adaptecArrayControllerDevIndex		1.3.6.1.4.1.795.10.1.50.5.1.1
An internally used identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevAdapterIndex		1.3.6.1.4.1.795.10.1.50.5.1.2
An index into the AdaptecArrayControllerAdapterTable that specified the AAC Controller to which this container belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevChannelId		1.3.6.1.4.1.795.10.1.50.5.1.3
The channel that the device is connected to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevId		1.3.6.1.4.1.795.10.1.50.5.1.4
The Device ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevLogicalNumber		1.3.6.1.4.1.795.10.1.50.5.1.5
The Logical Device ID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevType		1.3.6.1.4.1.795.10.1.50.5.1.6
The Device Type.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevVendor		1.3.6.1.4.1.795.10.1.50.5.1.7
The Device Vendor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerDevProduct		1.3.6.1.4.1.795.10.1.50.5.1.8
The Product Identifier.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerDevRevision		1.3.6.1.4.1.795.10.1.50.5.1.9
The Product Revision.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerDevBlocks		1.3.6.1.4.1.795.10.1.50.5.1.10
The Number of Blocks on the Device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevBytesPerBlock		1.3.6.1.4.1.795.10.1.50.5.1.11
The Number of Bytes Per Block on the Device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDevUsage		1.3.6.1.4.1.795.10.1.50.5.1.12
The manner of usage by the Adaptec Array Controller.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerDevStatus		1.3.6.1.4.1.795.10.1.50.5.1.13
The status of the device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerContainerToDeviceEntry		1.3.6.1.4.1.795.10.1.50.6.1
Each record of this type represents a row in a table that is used to list the physical devices that are used to make up a container. Each row includes an index into the container table to indicate the container that is being described, an index into the device table to show the device that is used by the container, and information about the size of the physical partition on the device.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerContainerToDeviceEntry

adaptecArrayControllerContainerToDeviceIndex		1.3.6.1.4.1.795.10.1.50.6.1.1
A unique index into the adaptecArrayControllerContainerToDeviceTable that can be used to identify each row in the table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerCDAdapterIndex		1.3.6.1.4.1.795.10.1.50.6.1.2
An index into the adapterArrayControllerTable indicating the controller hosting the container being described.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerContainerIndex		1.3.6.1.4.1.795.10.1.50.6.1.3
An index into the adaptecArrayControllerContainerEntry table indicating the container being described.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerDeviceIndex		1.3.6.1.4.1.795.10.1.50.6.1.4
An index into the AdaptecArrayControllerDeviceEntry table indicating the device on which a piece of the container resides.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerPartitionOffsetLSW		1.3.6.1.4.1.795.10.1.50.6.1.5
The least significant 32 bits of the offset into the physical disk to the start of the partition that is used by the referenced container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerPartitionOffsetMSW		1.3.6.1.4.1.795.10.1.50.6.1.6
The most significant 32 bits of the offset into the physical disk to the start of the partition that is used by the referenced container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerPartitionSizeLSW		1.3.6.1.4.1.795.10.1.50.6.1.7
The least significant 32 bits of the size of partition on the device used by the referenced container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerPartitionSizeMSW		1.3.6.1.4.1.795.10.1.50.6.1.8
The most significant 32 bits of the size of partition on the device used by the referenced container.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureEntry		1.3.6.1.4.1.795.10.1.50.20.1
Descriptive and status information for enclosures connected to Adaptec Array Controllers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureEntry

adaptecArrayControllerEnclosureIndex		1.3.6.1.4.1.795.10.1.50.20.1.1
Index into the Enclosure table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureAdapterIndex		1.3.6.1.4.1.795.10.1.50.20.1.2
An index into the AdaptecArrayControllerAdapterTable that specifies the AAC Controller to which this enclosure belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureProcessorId		1.3.6.1.4.1.795.10.1.50.20.1.3
The enclosure processor ID assigned on a per adapter basis.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureType		1.3.6.1.4.1.795.10.1.50.20.1.4
Standard adhered to for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), decFault(3), saf-te(4), ses(5), aemi(6)

adaptecArrayControllerEnclosureNumberFans		1.3.6.1.4.1.795.10.1.50.20.1.5
Number of fans for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureNumberPowerSupplies		1.3.6.1.4.1.795.10.1.50.20.1.6
Number of power supplies for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureNumberSlots		1.3.6.1.4.1.795.10.1.50.20.1.7
Number of slots for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDoorLock		1.3.6.1.4.1.795.10.1.50.20.1.8
Whether or not this enclosure has a host controllable door lock.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

adaptecArrayControllerEnclosureNumberTemperatureSensors		1.3.6.1.4.1.795.10.1.50.20.1.9
Number of temperature sensors for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSpeaker		1.3.6.1.4.1.795.10.1.50.20.1.10
Whether or not this enclosure has a speaker installed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	false(1), true(2)

adaptecArrayControllerEnclosureBootTimeDiagnostic		1.3.6.1.4.1.795.10.1.50.20.1.11
Boot time diagnostic value for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerEnclosureVendor		1.3.6.1.4.1.795.10.1.50.20.1.12
Vendor (from SCSI Inquiry) for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerEnclosureProduct		1.3.6.1.4.1.795.10.1.50.20.1.13
Product (from SCSI Inquiry) for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerEnclosureRevision		1.3.6.1.4.1.795.10.1.50.20.1.14
Revision (from SCSI Inquiry) for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerEnclosureIdLow		1.3.6.1.4.1.795.10.1.50.20.1.15
Unique ID number for this enclosure (least significant bits) (from SCSI Inquiry).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureIdHigh		1.3.6.1.4.1.795.10.1.50.20.1.16
Unique Id number for this enclosure (most significant bits) (from SCSI Inquiry).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureStandardRevision		1.3.6.1.4.1.795.10.1.50.20.1.17
Revision of standard adhered to for this enclosure (from SCSI Inquiry).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

adaptecArrayControllerEnclosurePowerOnTime		1.3.6.1.4.1.795.10.1.50.20.1.18
Total number of power on minutes for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosurePowerCycles		1.3.6.1.4.1.795.10.1.50.20.1.19
Total number of power cycles for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSpeakerStatus		1.3.6.1.4.1.795.10.1.50.20.1.20
Speaker status (on/off only) for this enclosure.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(1), on(2)

adaptecArrayControllerEnclosureOverTemperature		1.3.6.1.4.1.795.10.1.50.20.1.21
Indicates whether internal temperature for this enclosure exceeds normal.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerEnclosureFanEntry		1.3.6.1.4.1.795.10.1.50.21.1
Status information for enclosure fans.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureFanEntry

adaptecArrayControllerEnclosureFanIndex		1.3.6.1.4.1.795.10.1.50.21.1.1
Index into the enclosure fan table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureFanEnclosureIndex		1.3.6.1.4.1.795.10.1.50.21.1.2
Index into the enclosure table specifying which enclosure contains this fan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureFanStatus		1.3.6.1.4.1.795.10.1.50.21.1.3
Status of this fan.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6), notInstalled(7)

adaptecArrayControllerEnclosurePowerSupplyEntry		1.3.6.1.4.1.795.10.1.50.22.1
Status information for enclosure power supplies.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosurePowerSupplyEntry

adaptecArrayControllerEnclosurePowerSupplyIndex		1.3.6.1.4.1.795.10.1.50.22.1.1
Index into the enclosure power supply table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosurePowerSupplyEnclosureIndex		1.3.6.1.4.1.795.10.1.50.22.1.2
Index into the enclosure table specifying which enclosure contains this power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosurePowerSupplyStatus		1.3.6.1.4.1.795.10.1.50.22.1.3
Status of this power supply.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), operationalAndOn(2), operationalAndOff(3), onAndMalfunctioning(4), offAndMalfunctioning(5), installed(6), notInstalled(7)

adaptecArrayControllerEnclosureDoorLockEntry		1.3.6.1.4.1.795.10.1.50.23.1
Status information for enclosure door locks.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureDoorLockEntry

adaptecArrayControllerEnclosureDoorLockIndex		1.3.6.1.4.1.795.10.1.50.23.1.1
Index into the enclosure door lock table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDoorLockEnclosureIndex		1.3.6.1.4.1.795.10.1.50.23.1.2
Index into the enclosure table specifying which enclosure contains this door lock.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDoorLockSlot		1.3.6.1.4.1.795.10.1.50.23.1.3
Specifies the slot number for this door lock.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDoorLockStatus		1.3.6.1.4.1.795.10.1.50.23.1.4
Status of this door lock.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), locked(2), unlocked(3)

adaptecArrayControllerEnclosureTemperatureSensorEntry		1.3.6.1.4.1.795.10.1.50.24.1
Status information for enclosure temperature sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureTemperatureSensorEntry

adaptecArrayControllerEnclosureTemperatureSensorIndex		1.3.6.1.4.1.795.10.1.50.24.1.1
Index into the enclosure temperature sensor table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureTemperatureSensorEnclosureIndex		1.3.6.1.4.1.795.10.1.50.24.1.2
Index into the enclosure table specifying which enclosure contains this temperature sensor.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureTemperatureSensorOverTemperature		1.3.6.1.4.1.795.10.1.50.24.1.3
Specifies whether this temperature sensor has detected an over temperature condition.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	other(1), unknown(2), ok(3), nonCritical(4), critical(5), nonRecoverable(6)

adaptecArrayControllerEnclosureTemperatureSensorDegrees		1.3.6.1.4.1.795.10.1.50.24.1.4
Temperature registered by this sensor in degrees Fahrenheit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureScsiIdEntry		1.3.6.1.4.1.795.10.1.50.25.1
Scsi Id information for enclosure slots.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureScsiIdEntry

adaptecArrayControllerEnclosureScsiIdIndex		1.3.6.1.4.1.795.10.1.50.25.1.1
Index into the enclosure Scsi Id table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureScsiIdEnclosureIndex		1.3.6.1.4.1.795.10.1.50.25.1.2
Index into the enclosure table specifying which enclosure contains this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureScsiIdSlot		1.3.6.1.4.1.795.10.1.50.25.1.3
Specifies the slot number for this Scsi Id.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureChannelId		1.3.6.1.4.1.795.10.1.50.25.1.4
Channel Id of device in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureScsiId		1.3.6.1.4.1.795.10.1.50.25.1.5
SCSI Id of device in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureLunId		1.3.6.1.4.1.795.10.1.50.25.1.6
Logical Unit Id of device in this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDeviceInsertionEntry		1.3.6.1.4.1.795.10.1.50.26.1
Count information for enclosure device insertions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureDeviceInsertionEntry

adaptecArrayControllerEnclosureDeviceInsertionIndex		1.3.6.1.4.1.795.10.1.50.26.1.1
Index into the enclosure device insertion lock table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDeviceInsertionEnclosureIndex		1.3.6.1.4.1.795.10.1.50.26.1.2
Index into the enclosure table specifying which enclosure contains this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDeviceInsertionSlot		1.3.6.1.4.1.795.10.1.50.26.1.3
Specifies the slot number for this device insertion count.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureDeviceInsertions		1.3.6.1.4.1.795.10.1.50.26.1.4
Number of device insertions for this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSlotStatusEntry		1.3.6.1.4.1.795.10.1.50.27.1
Status information for enclosure slots.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AdaptecArrayControllerEnclosureSlotStatusEntry

adaptecArrayControllerEnclosureSlotStatusIndex		1.3.6.1.4.1.795.10.1.50.27.1.1
Index into the enclosure slot status table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSlotStatusEnclosureIndex		1.3.6.1.4.1.795.10.1.50.27.1.2
Index into the enclosure table specifying which enclosure contains this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSlotStatusSlot		1.3.6.1.4.1.795.10.1.50.27.1.3
Specifies the slot number for this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerEnclosureSlotStatus		1.3.6.1.4.1.795.10.1.50.27.1.4
Status of this slot.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

adaptecArrayControllerTraps		1.3.6.1.4.1.795.10.1.50.9000
OBJECT IDENTIFIER

aacControllerId		1.3.6.1.4.1.795.10.1.50.9000.1
Controller ID for this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	DisplayString

aacContainerId		1.3.6.1.4.1.795.10.1.50.9000.2
Zero-relative container ID for this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacBusId		1.3.6.1.4.1.795.10.1.50.9000.3
Bus ID for device referred to by this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacScsiId		1.3.6.1.4.1.795.10.1.50.9000.4
SCSI ID for device referred to by this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacLunId		1.3.6.1.4.1.795.10.1.50.9000.5
SCSI LUN ID for device referred to by this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacEnclosureProcessorId		1.3.6.1.4.1.795.10.1.50.9000.6
Enclosure processor ID for enclosure referred to by this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacComponentUnitId		1.3.6.1.4.1.795.10.1.50.9000.7
Component unit ID for enclosure referred to by this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

aacControllerNumber		1.3.6.1.4.1.795.10.1.50.9000.8
Zero-relative controller number for this trap.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER

netRAID4M28		1
A Drive Letter Changed on controller $1 ($2) for container $3.
TRAP-TYPE

netRAID4M29		2
A change in failover assignments occured on controller $1 ($2). Container : $3.
TRAP-TYPE

netRAID4M1		3
A container changed its state on controller $1 ($2). Container : $3.
TRAP-TYPE

netRAID4M30		4
A file system change has occured on container $3 on controller $1 ($2).
TRAP-TYPE

netRAID4M2		6
An unknown error occured on container $3 on adapter $1 ($2).
TRAP-TYPE

netRAID4M3		7
The container $3 on controller $1 ($2) is no longer in the mirroring state.
TRAP-TYPE

netRAID4M4		8
A failover operation for controller $1 ($2) container $3 failed because there was not enough space available on the failover device.
TRAP-TYPE

aacMirrorFailureNoUnmirror		9
The container $3 on controller $1 ($2) could not be unmirrored.
TRAP-TYPE

netRAID4M5		10
A mirror failover operation started on controller $1 ($2) for container $3.
TRAP-TYPE

netRAID4M6		11
A failover operation on controller $1 ($2) failed for container $3.
TRAP-TYPE

netRAID4M7		12
There is no failover device assigned to container $3 on controller $1 ($2).
TRAP-TYPE

netRAID4M8		13
A drive that was part of the mirror set (container) $3 failed. This occurred on controller $1 ($2).
TRAP-TYPE

netRAID4M9		14
A rebuild operation started on controller $1 ($2) for container $3.
TRAP-TYPE

aacRaidRebuildRestart		15
A rebuild operation was restarted on controller $1 ($2) for container $3.
TRAP-TYPE

netRAID4M10		16
A drive that was part of the RAID set (container) $3 failed. This occurred on controller $1 ($2).
TRAP-TYPE

netRAID4M11		17
There is no failover device assigned to container $3 on controller $1 ($2).
TRAP-TYPE

netRAID4M12		18
A failover operation for controller $1 ($2) container $3 failed because there is not enough space available on the failover device.
TRAP-TYPE

netRAID4M13		19
The snapshot container $3 on controller $1 ($2) is almost full.
TRAP-TYPE

netRAID4M14		20
The snapshot container $3 on controller $1 ($2) is full.
TRAP-TYPE

netRAID4M15		21
The rebuild operation on controller $1 ($2) for container $3 has completed.
TRAP-TYPE

netRAID4M31		22
A device has failed. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE

netRAID4M32		23
The controller $1 ($2) resumed normal I/O operations.
TRAP-TYPE

netRAID4M33		24
The AAC management interface is up.
TRAP-TYPE

netRAID4M16		25
The controller $1 ($2) requires battery reconditioning.
TRAP-TYPE

netRAID4M17		26
An enclosure connected to controller $1 ($2) has reported an error.
TRAP-TYPE

netRAID4M18		27
An enclosure connected to controller $1 ($2) has reported a fan failure.
TRAP-TYPE

netRAID4M19		28
An enclosure connected to controller $1 ($2) has reported a power supply failure.
TRAP-TYPE

netRAID4M20		29
An enclosure connected to controller $1 ($2) has reported an abnormal temperature reading.
TRAP-TYPE

netRAID4M21		30
An enclosure connected to controller $1 ($2) has reported a temperature reading above the user threshold. (aacComponentUnitId is currently not valid for this trap).
TRAP-TYPE

netRAID4M22		31
The battery connected to controller $1 ($2) is dead.
TRAP-TYPE

netRAID4M34		32
The battery connected to controller $1 ($2) is improving.
TRAP-TYPE

netRAID4M23		33
The battery connected to controller $1 ($2) has lost charge.
TRAP-TYPE

netRAID4M35		34
The controller $1 ($2) reports that its battery is good.
TRAP-TYPE

netRAID4M36		35
The controller $1 ($2) has been paused.
TRAP-TYPE

netRAID4M37		36
Container $3 has been created on controller $1 ($2).
TRAP-TYPE

netRAID4M38		37
Container $3 has been deleted on controller $1 ($2).
TRAP-TYPE

netRAID4M24		38
A device reported that its Failure Prediction Threshold had been exceeded. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE

netRAID4M39		39
A Failure Prediction Threshold test occured. Controller $1 ($2). Bus $3. Id $4. Lun $5.
TRAP-TYPE

netRAID4M25		40
A Device issued a warning. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE

netRAID4M26		41
A Device issued a abnormal temperature warning. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE

netRAID4M27		42
A device reported that its status is degraded. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE

netRAID4M40		43
The failure prediction configuration changed for a device. Controller $1 ($2). Bus $3. Id $4 Lun $5.
TRAP-TYPE