AcBoard

File: AcBoard.mib (217990 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI

Imported symbols

OBJECT-TYPE MODULE-IDENTITY TAddress
DisplayString DateAndTime TEXTUAL-CONVENTION
IpAddress enterprises

Defined Types

SnmpManagersEntry  
SEQUENCE    
  snmpManagerIndex INTEGER
  snmpManagerIsUsed INTEGER
  snmpManagerIp IpAddress
  snmpManagerTrapPort INTEGER
  snmpManagerTrapSendingEnable INTEGER

AcWEBAccessEntry  
SEQUENCE    
  acWEBAccessRowStatus INTEGER
  acWEBAccessAction INTEGER
  acWEBAccessActionResult INTEGER
  acWEBAccessIndex INTEGER
  acWEBAccessUserName OCTET STRING
  acWEBAccessUserCode OCTET STRING

TrunkSettingsEntry  
SEQUENCE    
  trunkId INTEGER
  clockMaster INTEGER
  framingMethod INTEGER
  protocolType INTEGER
  terminationSide INTEGER
  dchConfig INTEGER
  lineCode INTEGER
  lineBuildOutLoss INTEGER
  lineBuildOutOverwrite INTEGER
  lineBuildOutXPM0 INTEGER
  lineBuildOutXPM1 INTEGER
  lineBuildOutXPM2 INTEGER
  traceLevel INTEGER
  acV5InterfaceTrunkGroupId INTEGER
  acV5LinkIdOld INTEGER
  acPMStatus INTEGER
  acLedStatusColor INTEGER
  acLedStatusRate INTEGER
  acIsdnNfasInterfaceId INTEGER
  acTrunkCasTableIndex INTEGER
  acTrunkAdminState INTEGER
  acPSTNIuaInterfaceId INTEGER
  acIsdnQ931LayerResponseBehavior INTEGER
  acIsdnIncomingCallsBehavior INTEGER
  acIsdnOutgoingCallsBehavior INTEGER
  acIsdnGeneralCCBehavior INTEGER
  acIsdnNfasGroupNumber INTEGER

AcSS7SettingsEntry  
SEQUENCE    
  acSS7LinkId INTEGER
  acSS7traceLevel INTEGER

AcCasTablesEntry  
SEQUENCE    
  acCasTableIndex INTEGER
  acCasTabeName OCTET STRING

MegacoCallAgentsEntry  
SEQUENCE    
  megacoCallAgentId INTEGER
  megacoCallAgentIp OCTET STRING
  megacoCallAgentPort INTEGER
  megacoCallAgentIsUsed INTEGER

VoiceSettingsEntry  
SEQUENCE    
  cID INTEGER
  coder INTEGER
  eCE INTEGER
  sCE INTEGER
  pFE INTEGER
  hPFE INTEGER
  testMode INTEGER
  voiceVolume INTEGER
  inputGain INTEGER
  m INTEGER
  rTPRedundancyDepth INTEGER
  eCLength INTEGER
  eCHybridLoss INTEGER

FaxModemSettingsEntry  
SEQUENCE    
  fAXTransportType INTEGER
  acCallerIDType INTEGER
  v21ModemTransportType INTEGER
  v22ModemTransportType INTEGER
  v23ModemTransportType INTEGER
  v32ModemTransportType INTEGER
  v34ModemTransportType INTEGER
  faxRelayMaxRate INTEGER
  modemRelayMaxRate INTEGER
  faxRelayECMEnable INTEGER
  t38FaxRelayProtectionMode INTEGER
  faxRelayRedundancyDepth INTEGER
  enhancedFaxRelayRedundancyDepth INTEGER
  modemRelayRedundancyDepth INTEGER
  faxModemRelayVolume INTEGER
  faxModemBypassCoderType INTEGER
  faxModemBypassM INTEGER
  useT38orFRF11 INTEGER

DJBSettingsEntry  
SEQUENCE    
  dJBufMinDelay INTEGER
  dJBufOptFactor INTEGER

ChannelTDMBusSettingsEntry  
SEQUENCE    
  tDMBusInputPort INTEGER
  tDMBusInputChannel INTEGER
  tDMBusOutputDisable INTEGER
  tDMBusOutputPort INTEGER
  tDMBusOutputChannel INTEGER

TransportSettingsEntry  
SEQUENCE    
  useNIorPCI INTEGER
  disableSoftIPLoopback INTEGER
  uniDirectionalRTP INTEGER

RTPRTCPSettingsEntry  
SEQUENCE    
  cNAME OCTET STRING
  iPPrecedence INTEGER
  iPTOS INTEGER
  localRTPPort INTEGER
  remoteRTPAddr IpAddress
  remoteRTPPort INTEGER
  remoteT38Addr IpAddress
  remoteT38Port INTEGER
  rTCPMeanTxInterval INTEGER
  rxRTPPayloadType INTEGER
  txRTPPayloadType INTEGER

ChannelStatusEntry  
SEQUENCE    
  rTPActive INTEGER
  bypassNIC INTEGER
  pendingIdle INTEGER
  txSilencePeriod INTEGER
  rxSilencePeriod INTEGER
  txFaxMode INTEGER
  rxFaxMode INTEGER
  txDTMFPeriod INTEGER
  rxDTMFPeriod INTEGER
  packetsToDSPCnt INTEGER
  jitterBufErrorCnt INTEGER
  jitterBufForcedPacketLost INTEGER
  jitterBufForcedPacketAddition INTEGER
  jitterBufUnderRunCnt INTEGER
  jitterBufOverRunCnt INTEGER
  jitterBufAccumDelay INTEGER
  fXSorFXO INTEGER
  channelHookState INTEGER

Defined Values

audioCodes 1.3.6.1.4.1.5003
OBJECT IDENTIFIER    

acRegistrations 1.3.6.1.4.1.5003.7
OBJECT IDENTIFIER    

acGeneric 1.3.6.1.4.1.5003.8
OBJECT IDENTIFIER    

acProducts 1.3.6.1.4.1.5003.9
OBJECT IDENTIFIER    

acBoardMibs 1.3.6.1.4.1.5003.9.10
OBJECT IDENTIFIER    

acBoard 1.3.6.1.4.1.5003.9.10.1
AudioCodes Proprietary MIB Contains The managed objects of AudioCodes systems. Through this MIB, the User can set up the board configuration parameters, reset the board, and monitor the board's operational robustness and quality of service during run-time. This MIB has the following Groups: boardConfiguration boardInformation channelConfiguration channelStatus notifications reset boardConfiguration: When The user Get Parameter from most of sub-groups in boardConfiguration group, he gets the value that should be burned to the board after the next Remote Reset. He can Set new values to many parameters, and these values will burned to the board after the next remote Reset In the sub-group mGCPDefaultChannelSettings the parameters are the actual parameters, that will take place when opening channel. (Reset is not needed for that sub-group). BoardInformation: Contains Read-only parameters like: board name, serial number, number of channels, software version. ChannelConfiguration: Read-only Parameters to see the configuratin of each channel: voice settings, fax settings, etc. ChannelStatus: Read-only parameters about the status of channel, like: Is the channle active, is it in Silence Period, is it in Fax mode, ON/Off hook, etc. This group contains also counters: packets to DSP, errors, lost packets, underruns, etc. Notifications: In this version, the notification we have are: acEvBoardStarted, and acEvResetingBoard. The board should send these notifications to its manager that the user defined in INI file with the parameter: NMPManagerIP = (IP address). Reset: To remote reset the board, the user should set an integer value to the parameter remoteReset. Then he should get the trap acEvResettingBoard. Note: Before Reset, The current boardConfiguration parameters will be burned to the board. The user should not use INI file, if he wants these parameters to take place. To set the default values, the user should set an integer value to the parameter acSetDefaults.
MODULE-IDENTITY    

boardConfiguration 1.3.6.1.4.1.5003.9.10.1.1
OBJECT IDENTIFIER    

boardTDMBusSettings 1.3.6.1.4.1.5003.9.10.1.1.1
OBJECT IDENTIFIER    

pCMLawSelect 1.3.6.1.4.1.5003.9.10.1.1.1.1
Selects the type of PCM companding law in input/output TDM bus (TDM bus is defined using the TDMBusType parameter).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER muLaw(3), aLaw(1)  

tDMBusClockSource 1.3.6.1.4.1.5003.9.10.1.1.1.2
Selects the clock source on which the board synchronizes
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acTDMBusClockSource-Internal(1), acTDMBusClockSource-MVIP(3), acTDMBusClockSource-Network(4), acTDMBusClockSource-H110-A(8), acTDMBusClockSource-H110-B(9), acTDMBusClockSource-NetReference1(10), acTDMBusClockSource-NetReference2(11), acTDMBusClockSource-SC-2M(12), acTDMBusClockSource-SC-4M(13), acTDMBusClockSource-SC-8M(14), acTDMBusClockSource-BITS(15), acTDMBusClockSource-Network-B(16), acTDMBusClockSource-ATM-OC3(17), acTDMBusClockSource-ATM-OC3-B(18), acTDMBusClockSource-ATM-OC12(19)  

tDMBusEnableFallBack 1.3.6.1.4.1.5003.9.10.1.1.1.3
Enable/Disable clock fallback. The Fall Back clock is determined by BSPTDMBusFallbackClock
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tDMBusLocalReference 1.3.6.1.4.1.5003.9.10.1.1.1.4
When ClockSource is set to acH110BusClockSource_Network this parameter selects the TrunkID to be used as the clock synchronization source of the board. When using H.110/H.100 bus this parameter also selects the trunk which is used as the clock source for the NETREF clock generation (in this case ClockSource might not be set to acH110BusClockSource_Network).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..27  

idlePCMPattern 1.3.6.1.4.1.5003.9.10.1.1.1.5
PCM Pattern applied to E1/T1 timeslot (B-channel) when channel is idle.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

idleABCD 1.3.6.1.4.1.5003.9.10.1.1.1.6
ABCD (CAS) Pattern to be applied to CAS signaling bus before changed by the user or PSTN protocol. This is only relevant when using PSTN interface with CAS protocols.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

tDMBusMasterSlaveSelection 1.3.6.1.4.1.5003.9.10.1.1.1.7
Set SC/MVIP/H.110 to either: Master mode (the board is the clock source for the TDM bus) or Slave mode (some other board in the system must supply the clock to the TDM bus).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acTDMBusSlaveMode(0), acTDMBusMasterMode(1), acH110BusSecondaryMasterMode(2)  

tDMBusNetRefSpeed 1.3.6.1.4.1.5003.9.10.1.1.1.8
Determine the NetRef frequency (for both generation and synchronization).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acTH110BusNetReferenceSpeed-8khz(0), acTH110BusNetReferenceSpeed-20488khz(2)  

tDMBusOutputStartingChannel 1.3.6.1.4.1.5003.9.10.1.1.1.9
Defines the outgoing TDM Timeslot of the first channel (ChannelId=0). The remaining channels are organized sequentially.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..127  

boardTDMBusOutputPort 1.3.6.1.4.1.5003.9.10.1.1.1.10
Defines the SC/MVIP/H.100/H.110 port to be used for board's channel #0. All other channels then occupy the next timeslots sequentially
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..31  

tDMBusSpeed 1.3.6.1.4.1.5003.9.10.1.1.1.11
Selects the TDM Bus Speed. Speed is set according to the Bus Type. The following are allowed speeds for each bus type: SC = 0/2/3 H.110/H.100 = 3 MVIP = 0
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acTDMBusSpeed-2Mbps(0), acTDMBusSpeed-4Mbps(2), acTDMBusSpeed-8Mbps(3), acTDMBusSpeed-16Mbps(4)  

tDMBusType 1.3.6.1.4.1.5003.9.10.1.1.1.12
Selects the TDM bus interface to be used (only one TDM bus interface can be enabled at one time although more than one can physically exist on the board).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER mVIP-BUS(0), sC-BUS(1), uSE-FRAMERS(2), qSLAC-BUS(3), uSE-H110-BUS(4), uSE-EXT-BUS(5), aNALOG-BUS(6), uSE-PSTN-SW-ONLY(8)  

acOverrideDefaultIdlePCMPattern 1.3.6.1.4.1.5003.9.10.1.1.1.13
Override Default Idle PCM Pattern. 0 - use defaults (0xff-Mulaw, 0x55-Alaw) 1 - use IdlePCMPattern.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER useDefaults(0), useIdlePCMPattern(1)  

acOverrideDefaultIdleABCDPattern 1.3.6.1.4.1.5003.9.10.1.1.1.14
Description: Override Default Idle ABCD Pattern. 0 - use defaults (0xf) 1 - use IdleABCDPattern.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER useDefaults(0), useIdleABCDPattern(1)  

networkSettings 1.3.6.1.4.1.5003.9.10.1.1.2
OBJECT IDENTIFIER    

baseUDPPort 1.3.6.1.4.1.5003.9.10.1.1.2.1
Lower boundary of UDP ports to be used by the board. The upper boundary is BoardBaseUDPPort+10*(Number of Channels). Must be a multiple of 10.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..64000  

defaultGatewayAddr 1.3.6.1.4.1.5003.9.10.1.1.2.2
Default Gateway Address. Board's Default Gateway IP address. (in host byte order e.g. 192.10.1.255 = 0xc00a01ff).
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

boardIPAddr 1.3.6.1.4.1.5003.9.10.1.1.2.3
Board IP Address. in host byte order e.g. 192.10.1.2 = 0xc00a0102). Users should set the subnet mask to a valid value per the IP address.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

boardSubNetAddr 1.3.6.1.4.1.5003.9.10.1.1.2.4
Board SubNet Address. (in host byte order e.g. 255.255.255.0 = 0xffffff00). default =255.255.255.0.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

acSyslogServerIP 1.3.6.1.4.1.5003.9.10.1.1.2.5
IP address in dotted format notation, e.g., 192.10.1.255
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acMGControlProtocolType 1.3.6.1.4.1.5003.9.10.1.1.2.6
This parameter defines the control protocol type 0 = none, 1 = MGCP, 2 = MEGACO, 4 = H323, 8 = SIP
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER controlProtocol-None(0), controlProtocol-MGCP(1), controlProtocol-MEGACO(2), controlProtocol-H323(4), controlProtocol-SIP(8)  

acSNMPManagerIP 1.3.6.1.4.1.5003.9.10.1.1.2.7
SNMP manager server IP address
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acDisableWEBConfig 1.3.6.1.4.1.5003.9.10.1.1.2.8
Enables or disables Web Configuration 0-Read & Write mode(default) 1-Read Only mode
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

acEnableSyslog 1.3.6.1.4.1.5003.9.10.1.1.2.9
Enable SysLog protocol log.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acContrlProtocolTransportType 1.3.6.1.4.1.5003.9.10.1.1.2.10
Defines the transport type for the control: 0 - UDP, 1 - TCP (SCTP on road map).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acCPTransport-UDP-IP(0), acCPTransport-TCP-IP(1), acCPTransport-SCTP-IP(2)  

acCPControlDiffServ 1.3.6.1.4.1.5003.9.10.1.1.2.11
Defines the value of the 'DiffServ' field in the IP header for the control session.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..63  

snmpManagers 1.3.6.1.4.1.5003.9.10.1.1.2.21
OBJECT IDENTIFIER    

snmpManagersTable 1.3.6.1.4.1.5003.9.10.1.1.2.21.1
Snmp Managers Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    SnmpManagersEntry

snmpManagersEntry 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SnmpManagersEntry  

snmpManagerIndex 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.1
Snmp Manager Index
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2  

snmpManagerIsUsed 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.2
Enable the SNMP Manager to recieve traps.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

snmpManagerIp 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.3
IP address of default SNMP manager in dotted notation format: xxx.xxx.xxx.xxx. SNMP traps are sent to this manager.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

snmpManagerTrapPort 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.4
Sets the trap ports to be used by the different managers.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

snmpManagerTrapSendingEnable 1.3.6.1.4.1.5003.9.10.1.1.2.21.1.1.5
Enable the SNMP Manager to recieve traps.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acNTPSettings 1.3.6.1.4.1.5003.9.10.1.1.2.22
OBJECT IDENTIFIER    

acNTPServerIPAddress 1.3.6.1.4.1.5003.9.10.1.1.2.22.1
NTP Server IP address.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

acNTPUtcOffset 1.3.6.1.4.1.5003.9.10.1.1.2.22.2
NTP time to offset in seconds. Default is 0. Range - Between -43200 ot 43200 seconds.
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER -43200..43200  

acNTPUpdateInterval 1.3.6.1.4.1.5003.9.10.1.1.2.22.3
NTPupdate interval in seconds. Default is 86400 (24 hours). Not recommended to be set beyond one month (2592000 sec).
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

acWEBAccess 1.3.6.1.4.1.5003.9.10.1.1.2.23
OBJECT IDENTIFIER    

acWEBAccessTable 1.3.6.1.4.1.5003.9.10.1.1.2.23.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcWEBAccessEntry

acWEBAccessEntry 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AcWEBAccessEntry  

acWEBAccessRowStatus 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.1
WEB Access row-status
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..1  

acWEBAccessAction 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.2
WEB Access action
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..0  

acWEBAccessActionResult 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.3
WEB Access action result
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..0  

acWEBAccessIndex 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.4
WEB Access index
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..0  

acWEBAccessUserName 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.5
WEB Access user name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..26)  

acWEBAccessUserCode 1.3.6.1.4.1.5003.9.10.1.1.2.23.1.1.6
WEB Access user code
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..26)  

auxiliarySettings 1.3.6.1.4.1.5003.9.10.1.1.3
OBJECT IDENTIFIER    

enableDiagnostics 1.3.6.1.4.1.5003.9.10.1.1.3.1
The EnableDiagnostics checks the correct functionality of different hardware components on the board. Upon completion, the board sends EV_END_BIT which contains information on the results of the test of each hardware component.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acDiagnostics-Disabled(0), acDiagnostics-BuiltInTest(1), acDiagnostics-BuiltInTestwithPartialFlash(2), acDiagnostics-BuiltInTestWithSDRAM(3)  

trunkSettings 1.3.6.1.4.1.5003.9.10.1.1.4
OBJECT IDENTIFIER    

trunkSettingsTable 1.3.6.1.4.1.5003.9.10.1.1.4.1
Trunks Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TrunkSettingsEntry

trunkSettingsEntry 1.3.6.1.4.1.5003.9.10.1.1.4.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TrunkSettingsEntry  

trunkId 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.1
Trunk ID at board in which the call is taking place
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..32  

clockMaster 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.2
Selects the trunk clock source. When choosing acCLOCK_MASTER_OFF (= 0) the clock is recovered from the line. When choosing acCLOCK_MASTER_ON (= 1) the trunk clock source is provided by the internal/TDM bus clock source depending on the TDMBusClockSource parameter.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acCLOCK-MASTER-OFF(0), acCLOCK-MASTER-ON(1)  

framingMethod 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.3
Selects the Framing method to be used for this trunk.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER eXTENDED-SUPER-FRAME(0), sUPER-FRAME(1), e1-FRAMING-DDF(2), e1-FRAMING-MFF-CRC4(3), e1-FRAMING-MFF-CRC4-EXT(4), e1-FRAMING-NIL(5), t1-FRAMING-F4(6), t1-FRAMING-F12(7), t1-FRAMING-ESF(8), t1-FRAMING-ESF-CRC6(9), t1-FRAMING-F72(10), t1-FRAMING-ESF-CRC6-JT(11), t1-FRAMING-NIL(12)  

protocolType 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.4
Protocol Type. Sets the PSTN protocol to be used for this trunk. The protocol type parameter defines the interface and the specific telephony protocol. Each protocol defines the following: 1. E1 or T1 physical line configuration. 2. Fixed connection of the relevant time-slots, which are the Trunks' B-channels, mapping to the 60 (128 for TrunkPack-VoIP/400) DSP channels. This limitation is about to change in versions higher than 3.4. 3. Layer 3 specific telephony protocol or transparent mode of operation. Currently only identical configurations (protocol type, framing method, etc.) for the two trunks are supported.(see at the TrunkPack-VoIP User Manual for available protocols families) relevant only when TDMBusType=FRAMERS.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER nONE(0), e1EuroISDN(1), t1Cas(2), t1RawCas(3), t1Transparent(4), e1Transparent31(5), e1Transparent30(6), e1Mfcr2(7), e1CasR2(8), e1RawCAS(9), t1-NI2ISDN(10), t1-4EssISDN(11), t1-5Ess-9-ISDN(12), t1-5Ess-10-ISDN(13), t1-Dms100-ISDN(14), j1-TRANSPARENT(15), pROTOCOL-TYPE-T1-NTT-ISDN(16), pROTOCOL-TYPE-E1-AUSTEL-ISDN(17), pROTOCOL-TYPE-E1-HKT-ISDN(18), pROTOCOL-TYPE-E1-KOR-ISDN(19), pROTOCOL-TYPE-T1-HKT-ISDN(20), pROTOCOL-TYPE-E1-QSIG(21), pROTOCOL-TYPE-E1-TNZ-22(22), pROTOCOL-TYPE-T1-EXTRA-23(23), pROTOCOL-TYPE-V5-1-AN(24), pROTOCOL-TYPE-V5-1-LE(25), pROTOCOL-TYPE-V5-2-AN(26), pROTOCOL-TYPE-V5-2-LE(27), pROTOCOL-TYPE-T1-IUA(28), pROTOCOL-TYPE-E1-IUA(29), pROTOCOL-TYPE-E1-EXTRA-30(30), pROTOCOL-TYPE-E1-EXTRA-31(31), pROTOCOL-TYPE-T1-EXTRA-32(32), pROTOCOL-TYPE-T1-EXTRA-33(33), pROTOCOL-TYPE-T1-EURO-ISDN(34), pROTOCOL-TYPE-T1-DMS100-MERIDIAN-ISDN(35), pROTOCOL-TYPE-T1-NI1-ISDN(36)  

terminationSide 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.5
For ISDN only. select the ISDN Termination side (layer 2)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acUSER-TERMINATION-SIDE(0), acNETWORK-TERMINATION-SIDE(1)  

dchConfig 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.6
Defines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acDCH-CONFIG-PRIMARY(0), acDCH-CONFIG-BACKUP(1), acDCH-CONFIG-NFAS(2), acDCH-NOT-ISDN-TRUNK(3)  

lineCode 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.7
Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acB8ZS(0), acAMI(1), acHDB3(2)  

lineBuildOutLoss 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.8
Selects the line build out loss to be used for this trunk
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER ac0DB(0), ac7-5DB(1), ac15DB(2), ac22-5DB(3)  

lineBuildOutOverwrite 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.9
Overwrite the framer's XPM registers values (these registers control the line pulse shape).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acNO-OVER-WRITE(0), acOVER-WRITE(1)  

lineBuildOutXPM0 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.10
Controls the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert Users.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

lineBuildOutXPM1 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.11
Controls the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by expert Users.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

lineBuildOutXPM2 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.12
Controls the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1.Should be used only by expert Users.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

traceLevel 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.13
Defines the Protocol Trace level
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acNO-TRACE(0), acFULL-ISDN-TRACE(1), acLAYER3-ISDN-TRACE(2), acONLY-ISDN-Q931-MSGS-TRACE(3), acLAYER3-ISDN-TRACE-NO-DUPLICATION(4), acFULL-ISDN-TRACE-WITH-DUPLICATION(5), acISDN-Q931-RAW-DATA-TRACE(6), acISDN-Q921-RAW-DATA-TRACE(7), acISDN-Q931-Q921-RAW-DATA-TRACE(8), acSS7-MTP2(10), acSS7-MTP2-AND-APPLI(11), acSS7-MTP2-SL-L3-NO-MSU(12), acSS7-AAL(15)  

acV5InterfaceTrunkGroupId 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.14
copy from Table 8-1 in LIB manual 4.2beta
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

acV5LinkIdOld 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.15
copy from Table 8-1 in LIB manual 4.2beta
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acPMStatus 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.16
performance Monitoring Enable/Disable.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acLedStatusColor 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.17
Trunk led status color
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER off(0), red(1), green(2)  

acLedStatusRate 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.18
Trunk led status blinking rate
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER steady(0), blink(1)  

acIsdnNfasInterfaceId 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.19
Defines the Interface ID works with NS_EXPLICIT_INTERFACE_ID bit. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acTrunkCasTableIndex 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.20
Index of Cas Table used by this Trunk
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

acTrunkAdminState 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.21
Trunk Administrative State
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER lock(0), unLock(1)  

acPSTNIuaInterfaceId 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.22
IUA trunk interface ID value
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -1..2147483647  

acIsdnQ931LayerResponseBehavior 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.23
Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -2147483647..2147483647  

acIsdnIncomingCallsBehavior 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.24
This is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

acIsdnOutgoingCallsBehavior 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.25
This is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib Reference Library User's Manual.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

acIsdnGeneralCCBehavior 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.26
This is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Library User's Manual Document #: LTRT-00740.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

acIsdnNfasGroupNumber 1.3.6.1.4.1.5003.9.10.1.1.4.1.1.27
Relevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 4, 0 indicating that this trunk is not NFAS (in this case the ISDNNFASInterfaceID and DchConfig parameters are ignored).
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..4  

mGCPSettings 1.3.6.1.4.1.5003.9.10.1.1.5
OBJECT IDENTIFIER    

callAgentIP 1.3.6.1.4.1.5003.9.10.1.1.5.1
MGCP Call Agent IP address to be used for the initial RestartInProgress MGCP message (RSIP) (e.g., 192.10.1.255). Set to 0.0.0.0 to avoid sending RSIP. This parameter if in use overrides the Call Agent IP address provided in BootP.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

callAgentPort 1.3.6.1.4.1.5003.9.10.1.1.5.2
Gate Way will use CallAgentPort as default UDP Port of MGCP Call Agent.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

callAgentDomainName 1.3.6.1.4.1.5003.9.10.1.1.5.3
MGCP Call Agent domain name.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

redundantAgentIP 1.3.6.1.4.1.5003.9.10.1.1.5.4
Redundant MGCP call agent IP address for initial RestartInProgress MGCP message (RSIP) e.g. 192.10.1.255. Set to 0 to avoid sending RSIP.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

redundantAgentPort 1.3.6.1.4.1.5003.9.10.1.1.5.5
UDP Port of Redundant MGCP call agent.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65534  

redundantCallAgentDomainName 1.3.6.1.4.1.5003.9.10.1.1.5.6
Redundant MGCP Call Agent Domain name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

dePopulatedChannelsNumber 1.3.6.1.4.1.5003.9.10.1.1.5.7
This parameter can be used to enable MGCP call agent to access only subset of the on board channel bank. Set to -1 (or do not specify) to use all channels.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -1..2147483647  

gateWayName 1.3.6.1.4.1.5003.9.10.1.1.5.8
GateWay Name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

endPointName 1.3.6.1.4.1.5003.9.10.1.1.5.9
MGCP: Gateway's end point name. This is a prefix used to identify the endpoint, i.e., 'ACgw' in the following example: 'ACgw5@acl.com'. MEGACO: Prefix of the endpoint part of the termination name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

mGCPCommunicationLayerTimeout 1.3.6.1.4.1.5003.9.10.1.1.5.10
Assumed delay of the communication layer. It is used in retransmission.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..999  

acDefaultChannelSettings 1.3.6.1.4.1.5003.9.10.1.1.6
OBJECT IDENTIFIER    

acChDefaultDJBufMinDelay 1.3.6.1.4.1.5003.9.10.1.1.6.1
Dynamic Jitter Buffer Minimum Delay (msec)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..150  

acChDefaultDJBufOptFactor 1.3.6.1.4.1.5003.9.10.1.1.6.2
Dynamic Jitter Buffer frame error/delay optimization.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..13  

acChDefaultCallerIDType 1.3.6.1.4.1.5003.9.10.1.1.6.3
The supported caller ID standard types
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER callerIDStandard-Bellcore(0), callerIDStandard-ETSI(1), callerIDStandard-NTT(2), callerIDStandard-DTMF-Based-ETSI(16), callerIDStandard-Denmark(17), callerIDStandard-Indian(18)  

acChDefaultFaxModemBypassM 1.3.6.1.4.1.5003.9.10.1.1.6.4
Number of basic frames to generating one RTP fax/modem bypass packet.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

acChDefaultFaxModemRelayVolume 1.3.6.1.4.1.5003.9.10.1.1.6.5
Fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in 1 dBm steps.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -18..-3  

acChDefaultFaxRelayECMEnable 1.3.6.1.4.1.5003.9.10.1.1.6.6
Enables or disables the using of ECM mode during Fax Relay.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acChDefaultFaxRelayMaxRate 1.3.6.1.4.1.5003.9.10.1.1.6.7
Limits the maximum rate at which fax messages are transmitted.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acRate2400bps(0), acRate4800bps(1), acRate7200bps(2), acRate9600bps(3), acRate12000bps(4), acRate14400bps(5)  

acChDefaultFaxTransportMode 1.3.6.1.4.1.5003.9.10.1.1.6.8
Sets the Fax over IP transport method.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultModemRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.1.6.9
Amount of redundancy for fax relay packets
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acChDefaultModemRelayMaxRate 1.3.6.1.4.1.5003.9.10.1.1.6.10
Default: Modem Relay Max Rate
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER ac2400(0), ac4800(1), ac7200(2), ac9600(3), ac12000(4), ac14400(5)  

acChDefaultUseT38orFRF11 1.3.6.1.4.1.5003.9.10.1.1.6.11
Selects protocol to send/ receive fax relay.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER fRF11(0), acT38(1)  

acChDefaultV21ModemTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.12
Sets the V.21 modem transport method (must be set to 0 = disable)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultV22ModemTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.13
Sets the V.22 modem transport method
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultV23ModemTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.14
Sets the V.23 modem transport method
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultV32ModemTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.15
Sets the V.32 modem transport method
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultV34ModemTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.16
Sets the V.34 modem transport method
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), relayEnable(1), byPassEnable(2), eventsOnly(3)  

acChDefaultFaxModemBypassCoderType 1.3.6.1.4.1.5003.9.10.1.1.6.17
The User can set the bypass coder (according to the known coders)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER g711Alaw-64(0), g711Mulaw(1), g726-32(4), g726-40(5)  

acChDefaultFaxRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.1.6.18
Default: Fax Relay Redundancy Depth. Number of repetitions to be applied to each fax relay payload when transmitting to network.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2  

acChDefaultT38ProtectionMode 1.3.6.1.4.1.5003.9.10.1.1.6.19
Default: T38 Protection Mode. Use Forward Error Correction (FEC) algorithm to protect T.38 fax relay stream.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER redundancyPackets(0), fEC(1)  

acChDefaultDTMFVolume 1.3.6.1.4.1.5003.9.10.1.1.6.20
DTMF generation Volume Control
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -31..0  

acChDefaultDTMFTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.21
0 = Mute = erases digit from voice stream does not relay to remote. 2 = Transparent = digits remains in voice stream. 3 = RFC 2833 relay = erase digit from voice stream relay to remote using RFC 2833 syntax. The other values as seen in the Value List (1 and 7) are not supported as of version 4.4.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acMuteDTMF(0), acRelayDTMF(1), acTransparentDTMF(2), acRFC2833RalayDTMF(3), acRFC2833RelayDecoderMute(7)  

acChDefaultMFTransportType 1.3.6.1.4.1.5003.9.10.1.1.6.22
0 = erase MFs from voice transport not relayed to remote. 2 = MFs not erased not relayed to remote. 3 = MFs are muted from the voice stream & relayed according to RFC 2833.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acMuteMF(0), acRelayMF(1), acTransparentMF(2), acRFC2833RalayMF(3)  

acChDefaultInputGain 1.3.6.1.4.1.5003.9.10.1.1.6.23
PCM input gain. The range is 31 dB to +31 dB in 1 dB steps.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -32..31  

acChDefaultRTPRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.1.6.24
Enables or disables generation of RFC 2198 redundancy packets.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acChDefaultTestMode 1.3.6.1.4.1.5003.9.10.1.1.6.25
Testing mode applied. 0 = Coder Loopback performs an encoder/decoder loopback inside DSP device. 1 = PCMLoopback loops back incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to outgoing PCM. 3 = NoLoopback sets the channel to work in normal mode.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER coderLoopback(0), pCMLoopback(1), toneInjection(2), noLoopback(3)  

acChDefaultVoiceVolume 1.3.6.1.4.1.5003.9.10.1.1.6.26
Voice output gain control the range is -31 dB to +31 dB in 1 dB steps -32 = mute.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -32..31  

acChDefaultM 1.3.6.1.4.1.5003.9.10.1.1.6.27
Number of DSP payloads for generating one RTP packet
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..12  

acChDefaultFlashHookPeriod 1.3.6.1.4.1.5003.9.10.1.1.6.28
Flash hook period.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

acChDefaultDTMFDetectionPoint 1.3.6.1.4.1.5003.9.10.1.1.6.29
Defines if the detection of DTMF events is notified at the end of DTMF or at the start of DTMF.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

acChDefaultRtpIpTos 1.3.6.1.4.1.5003.9.10.1.1.6.30
Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..15  

acChDefaultRtpIpPrecedence 1.3.6.1.4.1.5003.9.10.1.1.6.31
Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

acChDefaultEchoCancler 1.3.6.1.4.1.5003.9.10.1.1.6.32
Controls the activation of the Echo Canceler (refer also to 'ForceEchoOff')
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

acChDefaultSilenceSuppression 1.3.6.1.4.1.5003.9.10.1.1.6.33
Silence Suppression mode
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER sILENCE-COMPRESION-DISABLE(0), sILENCE-COMPRESION-ENABLE(1), sILENCE-COMPRESION-ENABLE-NOISE-ADAPTATION-DISABLE(2)  

acChDefaultEchoCanclerHybridLoss 1.3.6.1.4.1.5003.9.10.1.1.6.34
Sets worst case ratio between signal level transmitted to hybrid & echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to acTECHybridLoss enumeration:
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER eCHybridLoss6DBM(0), eCHybridLoss9DBM(1), eCHybridLoss0DBM(2), eCHybridLoss3DBM(3)  

acChDefaultPacketizationPeriod 1.3.6.1.4.1.5003.9.10.1.1.6.35
Packetization Period
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 5..80  

aTMSettings 1.3.6.1.4.1.5003.9.10.1.1.7
OBJECT IDENTIFIER    

vPMask 1.3.6.1.4.1.5003.9.10.1.1.7.1
VP masking bits used for address resolution
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

vCMask 1.3.6.1.4.1.5003.9.10.1.1.7.2
VC masking bits used for address resolution
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

externalClk 1.3.6.1.4.1.5003.9.10.1.1.7.3
Source clock of on the board UTOPIA bus
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acATMUtopiaExternalClock(1), acATMUtopiaInternalClock(0)  

aTMLoopBack 1.3.6.1.4.1.5003.9.10.1.1.7.4
Phy loopback. The loopback can be used for testing purposes. The loopback direction is towards the PSTN side
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER loopbackDisabled(0), loopbackEnabled(1)  

utopiaSlave 1.3.6.1.4.1.5003.9.10.1.1.7.5
UTOPIA interface mode of bus arbitration
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER aTM-UTOPIA-MASTER(0), aTM-UTOPIA-SLAVE(1)  

multyPhy 1.3.6.1.4.1.5003.9.10.1.1.7.6
UTOPIA interface SinglePhy or MultiPhy mode
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER singlePhy(0), multiPhy(1)  

slavePhyNum 1.3.6.1.4.1.5003.9.10.1.1.7.7
Provides the slave number for this device (board) in the UTOPIA system bus (Applies to slave mode only)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -1..31  

utopiaBus16 1.3.6.1.4.1.5003.9.10.1.1.7.8
UTOPIA interface mode of bus width
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acATMUtopiaBusWidth16bit(0), acATMUtopiaBusWidth8bit(1)  

aTMPHYType 1.3.6.1.4.1.5003.9.10.1.1.7.9
External interface type of the board
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acOC3(0), acUtopia(1)  

disablePayloadScrambling 1.3.6.1.4.1.5003.9.10.1.1.7.10
Disable/Enable Cell payload scrambling in the ATM PHY
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER enable(0), disable(1)  

pHYClkSource 1.3.6.1.4.1.5003.9.10.1.1.7.11
OC3 Tx clock source
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acPhyInternalClock(0), acPhyExternalClock(1)  

sendIdleCASUponLinkFail 1.3.6.1.4.1.5003.9.10.1.1.7.12
This I.366.2 allows sending a special idle CAS packet which signals that the other side has a failure
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acATMSendIdleCASUponLinkFail-Disabled(0), acATMSendIdleCASUponLinkFail-Enabled(1)  

masterSlaveMode 1.3.6.1.4.1.5003.9.10.1.1.7.13
Loop Emulation Mode (vmoa145) Master/Slave mode
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acATM-MasterMode-CO-IWF(0), acATM-SlaveMode-CP-IWF(1)  

vccProfile 1.3.6.1.4.1.5003.9.10.1.1.7.14
Determine the required combination of Board's maximal number of VCC and maximal number of channels per VCC
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER ac240VCCs-8CIDsperVCC(0), ac105VCCs-24CIDsperVCC(1), ac84VCCs-32CIDsperVCC(2), ac14VCCs-240CIDsperVCC(3)  

tPNCPVPI 1.3.6.1.4.1.5003.9.10.1.1.7.15
VPI used for transferring TPNCP command over AAL5 transport layer
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

tPNCPVCI 1.3.6.1.4.1.5003.9.10.1.1.7.16
VCI used for transferring TPNCP command over AAL5 transport layer
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sAALLink0VPI 1.3.6.1.4.1.5003.9.10.1.1.7.17
VPI of the 1st SAAL link (number 0)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sAALLink0VCI 1.3.6.1.4.1.5003.9.10.1.1.7.18
VCI of the 1st SAAL link (number 0)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sAALLink1VPI 1.3.6.1.4.1.5003.9.10.1.1.7.19
VPI of the 2nd SAAL link (number 1)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

sAALLink1VCI 1.3.6.1.4.1.5003.9.10.1.1.7.20
VCI of the 1st SAAL link (number 1)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

acSS7Settings 1.3.6.1.4.1.5003.9.10.1.1.8
OBJECT IDENTIFIER    

acSS7SettingsTable 1.3.6.1.4.1.5003.9.10.1.1.8.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcSS7SettingsEntry

acSS7SettingsEntry 1.3.6.1.4.1.5003.9.10.1.1.8.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AcSS7SettingsEntry  

acSS7LinkId 1.3.6.1.4.1.5003.9.10.1.1.8.1.1.1
SS7 Link Id.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

acSS7traceLevel 1.3.6.1.4.1.5003.9.10.1.1.8.1.1.2
.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER acNO-TRACE(0), acFULL-TRACE(1), acISDN-IUA-TRACE(9), acSS7-MTP2(10), acSS7-MTP2-AND-APPLI(11), acSS7-MTP2-SL-L3-NO-MSU(12), acSS7-AAL(15)  

acConfigFiles 1.3.6.1.4.1.5003.9.10.1.1.11
OBJECT IDENTIFIER    

acFxsCoefficients 1.3.6.1.4.1.5003.9.10.1.1.11.1
The FXS coefficient file name.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

acFxoCoefficients 1.3.6.1.4.1.5003.9.10.1.1.11.2
The FXO coefficient file name.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

acCptFile 1.3.6.1.4.1.5003.9.10.1.1.11.3
.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

acVpFile 1.3.6.1.4.1.5003.9.10.1.1.11.4
The name (and path) of the file containing the voice prompts
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

acCasTables 1.3.6.1.4.1.5003.9.10.1.1.11.21
OBJECT IDENTIFIER    

acCasTablesTable 1.3.6.1.4.1.5003.9.10.1.1.11.21.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AcCasTablesEntry

acCasTablesEntry 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  AcCasTablesEntry  

acCasTableIndex 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.1
Cas Table Indexd
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

acCasTabeName 1.3.6.1.4.1.5003.9.10.1.1.11.21.1.1.2
Cas Table Name
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

acFxs 1.3.6.1.4.1.5003.9.10.1.1.12
OBJECT IDENTIFIER    

acPolarityReversalType 1.3.6.1.4.1.5003.9.10.1.1.12.1
Sets the type of the polarity reversal signal used for the network far-end answer and disconnect indications. Smooth reversal prevents negative effects as non-required ringing.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER soft(0), hard(1)  

megacoSettings 1.3.6.1.4.1.5003.9.10.1.1.13
OBJECT IDENTIFIER    

megacoCurrentProfile 1.3.6.1.4.1.5003.9.10.1.1.13.1
Use this parameter to MGCP/MEGACO beheviour for specific compatibility. See user manual.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..8191  

megacoGatewayName 1.3.6.1.4.1.5003.9.10.1.1.13.2
MGCP:Gateway's identification name towards the MGCP Call Agent. If empty Gateway name holds the IP address of the board MEGACO: Prefix of the gateway part of the termination name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

megacoEndpointName 1.3.6.1.4.1.5003.9.10.1.1.13.3
Megaco Endpoint Name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

megacoTrunkName 1.3.6.1.4.1.5003.9.10.1.1.13.4
MGCP: Together with 'EndpointPrefix' field generates local endpoint name on trunk enabled gateways MEGACO: Prefix of the trunk part of the termination name
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

megacoActiveCallAgentIp 1.3.6.1.4.1.5003.9.10.1.1.13.5
Megaco Active Call Agent
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

megacoActiveCallAgentPort 1.3.6.1.4.1.5003.9.10.1.1.13.6
Megaco Active Port
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..32767  

megacoCheckLegalityOfMGC 1.3.6.1.4.1.5003.9.10.1.1.13.8
This parameter specified if the MEGACO will reject commands from an MGC not in the provisioned list
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

megacoCallAgents 1.3.6.1.4.1.5003.9.10.1.1.13.7
OBJECT IDENTIFIER    

megacoCallAgentsTable 1.3.6.1.4.1.5003.9.10.1.1.13.7.1
Magaco Call agents Table
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MegacoCallAgentsEntry

megacoCallAgentsEntry 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  MegacoCallAgentsEntry  

megacoCallAgentId 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.1
Megaco Call Agent Id
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

megacoCallAgentIp 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.2
Megaco CallAgent IP
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

megacoCallAgentPort 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.3
List of up to 10 UDP Ports of MEGACO Call Agent separated by , or ;.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..32767  

megacoCallAgentIsUsed 1.3.6.1.4.1.5003.9.10.1.1.13.7.1.1.4
Is this index used
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

acPSTNParameters 1.3.6.1.4.1.5003.9.10.1.1.14
OBJECT IDENTIFIER    

acQ931RELAYMODE 1.3.6.1.4.1.5003.9.10.1.1.14.1
ISDN level 3 mode
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER none(0), activateLAPDmessaging(1), layer3-IS-IUA(3)  

acIsdnDuplicateQ931BuffMode 1.3.6.1.4.1.5003.9.10.1.1.14.2
Activates / de-activates delivery of raw Q.931 messages. This Object is obsolete and is replaces by acTrunkISDNCommonDuplicateQ931BuffMode in the acPSTN-MIB.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

acPSTNCASTableNum 1.3.6.1.4.1.5003.9.10.1.1.14.3
Indicates how many CAS protocol configuration files are loaded, when 0 is no CAS table. It should match the number of fields.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..8  

aMsConfiguration 1.3.6.1.4.1.5003.9.10.1.1.51
OBJECT IDENTIFIER    

amsNumOfConferencePorts 1.3.6.1.4.1.5003.9.10.1.1.51.1
Number Of Conference ports. How many ports on the TPM are allocated to the conferencing service.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..480  

amsNumOfTestTrunkPorts 1.3.6.1.4.1.5003.9.10.1.1.51.2
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Test Trunk service.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..480  

amsNumOfLawfulInterceptPorts 1.3.6.1.4.1.5003.9.10.1.1.51.3
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Lawful Intercept service.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..480  

amsNumOfAnnouncementPorts 1.3.6.1.4.1.5003.9.10.1.1.51.4
Number Of Test Trunk ports. How many ports on the TPM are allocated to the Announcement service.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..480  

amsApsIpAddress 1.3.6.1.4.1.5003.9.10.1.1.51.5
Sets the destination IP to which the heartbeat packets are sent.
Status: obsolete Access: read-write
OBJECT-TYPE    
  IpAddress  

amsApsPort 1.3.6.1.4.1.5003.9.10.1.1.51.6
Sets the destination UDP port to which the heartbeat packets are sent.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..64000  

amsPrimaryLanguage 1.3.6.1.4.1.5003.9.10.1.1.51.7
Primary Language
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER isoLangBasque(15), amsLangBelgianDutch(0), amsLangCantonese(1), isoLangCatalan(16), isoLangCzech(19), isoLangDutch(10), isoLangEnglish(2), isoLangFrench(3), isoLangGallegan(17), isoLangGerman(4), isoLangGreek(20), isoLangHebrew(18), isoLangJapanese(6), isoLangItalian(5), isoLangKorean(7), isoLangMalay(8), isoLangMandarin(9), isoLangPortuguese(11), isoLangSpanish(12), isoLangTagalog(13), isoLangThai(14), isoLangTurkish(21), isoLangVietnamese(22), amsLangBad(100)  

amsSecondaryLanguage 1.3.6.1.4.1.5003.9.10.1.1.51.8
Secondary Language
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER isoLangBasque(15), amsLangBelgianDutch(0), amsLangCantonese(1), isoLangCatalan(16), isoLangCzech(19), isoLangDutch(10), isoLangEnglish(2), isoLangFrench(3), isoLangGallegan(17), isoLangGerman(4), isoLangGreek(20), isoLangHebrew(18), isoLangJapanese(6), isoLangItalian(5), isoLangKorean(7), isoLangMalay(8), isoLangMandarin(9), isoLangPortuguese(11), isoLangSpanish(12), isoLangTagalog(13), isoLangThai(14), isoLangTurkish(21), isoLangVietnamese(22), amsLangBad(100)  

amsProfile 1.3.6.1.4.1.5003.9.10.1.1.51.9
AMS Profile Bit Mask: 1'st bit - APS Audio Enable/Disable 2'nd bit - Trunks Interface On/Off 3'td bit - Board Operation State change on ATM Port failure Enable/Disable.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

amsAASPackagesProfile 1.3.6.1.4.1.5003.9.10.1.1.51.10
.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER td5Starndard(0), h2489Standard(1)  

acFeatureKey 1.3.6.1.4.1.5003.9.10.1.1.90
OBJECT IDENTIFIER    

acFeatureKeyString 1.3.6.1.4.1.5003.9.10.1.1.90.1
Coded Key specific for board and required features.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

acActiveFeaturesList 1.3.6.1.4.1.5003.9.10.1.1.90.2
List of all avtivated features.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..484)  

supplementary 1.3.6.1.4.1.5003.9.10.1.1.99
OBJECT IDENTIFIER    

supplementaryField 1.3.6.1.4.1.5003.9.10.1.1.99.1
Flexible INI file line.
Status: obsolete Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

boardInformation 1.3.6.1.4.1.5003.9.10.1.2
OBJECT IDENTIFIER    

boardType 1.3.6.1.4.1.5003.9.10.1.2.1
The type of the Board.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER unKnownBoard(0), tP-08(1), mEDIAPACK-108(2), mEDIAPACK-124(3), tP-240(8), tP-610-CL120(10), tP-600(11), tP-600-IPMEDIA(12), tP-9800-C(13), tPM800(16), tPM800-RDK(17), tPM800B(18), tPM800B-RDK(19), tP1600(20), tP-240-IpMedia(21), tPM1100(22), trunkPack-260-IpMedia(23), tP1610(24), mP-104(25), mP-102(26), tP-04(27), tP-02(28), tP-1610-SB(29), tP-1610-IpMedia(30), tP-MEDIANT2000(31), tP-STRETTO2000(32), tP-IPMServer2000(33), tP-2810(34), tP-260-UN-IpMedia(35), tP-260-IpMedia-30Ch(36), tP-260-IpMedia-60Ch(37), tP-260-IpMedia-120Ch(38), tP-260RT-IpMedia-30Ch(39), tP-260RT-IpMedia-60Ch(40), tP-260RT-IpMedia-120Ch(41), tP-260(42), tP-260-UN(43), tPM1100-PCM(44), tP-6310(45), tPM6300(46), mediant1000(47), ipMedia3000(48), mediant3000(49), stretto3000(50), tP-6310-IpMedia(51), tP-6310-SB(52), aTP-1610(53), aTP-260(54), aTP-260-UN(55), mP-118(56)  

boardName 1.3.6.1.4.1.5003.9.10.1.2.2
The name fo the board
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

serialNum 1.3.6.1.4.1.5003.9.10.1.2.3
serial number of board.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

dSPCount 1.3.6.1.4.1.5003.9.10.1.2.4
DSP Count
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

channelsCount 1.3.6.1.4.1.5003.9.10.1.2.5
Channel Count.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

cPUSpeed 1.3.6.1.4.1.5003.9.10.1.2.6
CPU Speed
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

softwareVersion 1.3.6.1.4.1.5003.9.10.1.2.7
TrunkPack Software Version
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

trunkPackSoftwareDate 1.3.6.1.4.1.5003.9.10.1.2.8
TrunkPack Software Date
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

slotNumber 1.3.6.1.4.1.5003.9.10.1.2.9
Slot number
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

iniFileVersion 1.3.6.1.4.1.5003.9.10.1.2.10
Ini file version.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acDspType 1.3.6.1.4.1.5003.9.10.1.2.11
Dsp Type
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acFlashVersion 1.3.6.1.4.1.5003.9.10.1.2.12
Flash [BootLoader] Version.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acBoardFxsOrFxo 1.3.6.1.4.1.5003.9.10.1.2.13
Board is Fxs Or Fxo
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER fXO(0), fXS(1)  

acTrunkslCount 1.3.6.1.4.1.5003.9.10.1.2.14
Trunks Count.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acDspVersionTemplate 1.3.6.1.4.1.5003.9.10.1.2.15
selects the DSP load number, which defines the supported set of coders. Default=0 Each template assigns a specific version to each DSP. Each DSP version supports a set of coders and features. The number of channels supported by the DSP can also vary between DSP versions. The total number of channels supported by the board depends on the selected template.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acFirstPortDuplexMode 1.3.6.1.4.1.5003.9.10.1.2.16
full-duplex or half-duplex connection
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER halfDuplex(0), fullDuplex(1), forceModeValue(2), notAvailable(3)  

acFirstPortSpeed 1.3.6.1.4.1.5003.9.10.1.2.17
.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER forceModeValue(2), notAvailable(3), ac10Mbps(10), ac100Mbps(100)  

acMeanFreeChannels 1.3.6.1.4.1.5003.9.10.1.2.18
Mean of Free Channels
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acMaxFreeChannels 1.3.6.1.4.1.5003.9.10.1.2.19
Max of Free Channels
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acSysUpTime 1.3.6.1.4.1.5003.9.10.1.2.20
Time (in Seconds) that the board is alive.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

acPhysicalModCount 1.3.6.1.4.1.5003.9.10.1.2.21
.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER soloist(0), second(1), first(2)  

acBoardTemperature 1.3.6.1.4.1.5003.9.10.1.2.22
Temperature of the board in degrees Celsius, should not go higher then 60!
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

channelConfiguration 1.3.6.1.4.1.5003.9.10.1.3
OBJECT IDENTIFIER    

voiceSettings 1.3.6.1.4.1.5003.9.10.1.3.2
OBJECT IDENTIFIER    

voiceSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.2.1
Data in voice SettingsTable uniquely identify a voice parameters of channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VoiceSettingsEntry

voiceSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.2.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  VoiceSettingsEntry  

cID 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.1
Channel ID
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

coder 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.2
Digital voice coder
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER g711Alaw(0), g711Mulaw(1), g726-16(2), g726-24(3), g726-32(4), g726-40(5), g727-16(6), g727-24-16(7), g727-24(8), g727-32-16(9), g727-32-24(10), g727-32(11), g727-40-16(12), g727-40-24(13), g727-40-32(14), g723Low(15), g723High(16), g729(17), gSM(19), gSM610MS(20), transparent(22), g728(23), hDLCCoder(24), netCoder-4-8(25), netCoder-5-6(26), netCoder-6-4(27), netCoder-7-2(28), netCoder-8(29), netCoder-8-8(30), netCoder-9-6(31), eVRC(32), eVRC-TFO(33), qCELP-8(34), qCELP-8-TFO(35), qCELP-13(36), qCELP-13-TFO(37), noCoder(40), modemAnswer(41), modemCall(42), g711Alaw-5-5(45), g711Mulaw-5-5(46), g726-32-5-5(47), aMR-4-75(50), aMR-5-15(51), aMR-5-9(52), aMR-6-7(53), aMR-7-4(54), aMR-7-95(55), aMR-10-2(56), aMR-12-2(57), iLBC-15(63), iLBC-13(64), bV-16(65), acAMRWB-6-6(66), acAMRWB-8-85(67), acAMRWB-12-65(68), acAMRWB-14-25(69), acAMRWB-15-85(70), acAMRWB-18-25(71), acAMRWB-19-85(72), acAMRWB-23-05(73), acAMRWB-23-85(74), acG722-48K(75), acG722-56K(76), acG722-64K(77), acDPNSSCoder(78)  

eCE 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.3
Enable/Disable Echo Canceler
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

sCE 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.4
Enable/Disable Silence Compresion mechanism
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

pFE 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.5
Post Filter Enable of the voice coder
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

hPFE 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.6
High Pass Filter Enabled of the voice coder
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

testMode 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.7
Testing mode to be applied. Valid Range:CoderLoopback will perform an encoder-decoder loopback inside the DSP device, PCMLoopback will loopback the incoming PCM to the outgoing PCM, ToneInjection will generate a1000 Hz tone to outgoing PCM and NoLoopback will set the channel to work in a normal mode. Refer to TTestCode enumeration (default =3= NoLoopBack).
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER coderLoopback(0), pCMLoopback(1), toneInjection(2), noLoopback(3)  

voiceVolume 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.8
Voice Volume sets the voice decoder's output gain Range: 0-63 corresponding to -31 dB to +31 dB in 1 dB steps
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

inputGain 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.9
PCM input gain sets the gain at the encoder's input.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..63  

m 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.10
This Packet Multiply Factor is the Number of 20 msec payloads (30 msec for G.723) to be used for generating one RTP packet. Range: 1 - Until max Tx/Rx buffer size is reached
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 1..12  

rTPRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.11
RTP Redundancy Depth. Number of repetitions to be applied to each RTP payload when transmitting to network. apply redundancy sequence per RFC2198. Valid range: Disable redundancy packets generation = 0. Enable generation of RFC2198 redundancy packets = 1.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

eCLength 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.12
Length of echo canceler tail to be used according to TECLength enumeration. Note that EC length has different length limitations for different boards.
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER eCLength10MSec(0), eCLength15Msec(1), eCLength20Msec(2), eCLength25Msec(3), eCLength30Msec(4), eCLength35Msec(5), eCLength40Msec(6), eCLength45Msec(7), eCLength50Msec(8), eCLength55Msec(9), eCLength60Msec(10)  

eCHybridLoss 1.3.6.1.4.1.5003.9.10.1.3.2.1.1.13
Echo Cancler Hybrid Loss. sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from the hybrid. User should set this value according to the worst hybrid in the system in terms of echo return loss according to enum TECHybridLoss enumeration
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER loss6DB(0), loss9DB(1), loss0DB(2), loss3DB(3)  

faxModemSettings 1.3.6.1.4.1.5003.9.10.1.3.3
OBJECT IDENTIFIER    

faxModemSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.3.1
Data in faxModem Settings Table uniquely identify fax and modem parameters channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    FaxModemSettingsEntry

faxModemSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.3.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  FaxModemSettingsEntry  

fAXTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.1
FAX Transport Type.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

acCallerIDType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.2
CallerID Type.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

v21ModemTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.3
V21 Modem Transpor tType.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

v22ModemTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.4
V22 Modem Transpor tType.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

v23ModemTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.5
V23 Modem Transpor tType.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

v32ModemTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.6
V32 Modem Transpor tType.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

v34ModemTransportType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.7
V34 Modem Transpor tType.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER transparent(0), relay(1), bypass(2)  

faxRelayMaxRate 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.8
Fax Relay Max Rate Limits the maximum rate at which fax messages are transmitted. Refer to acTFaxModemRelayRate enumeration. (Default =14400 bps).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ac2400(0), ac4800(1), ac7200(2), ac9600(3), ac12000(4), ac14400(5)  

modemRelayMaxRate 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.9
Modem Relay Max Rate Limits the maximum rate at which modem relay messages are transmitted. Refer to acTFaxModemRelayRate enumeration. (Default =14400 bps).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER ac2400(0), ac4800(1), ac7200(2), ac9600(3), ac12000(4), ac14400(5)  

faxRelayECMEnable 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.10
Fax Relay ECM Enable Enable using ECM mode during Fax Relay.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

t38FaxRelayProtectionMode 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.11
T38 Fax Relay Protection Mode Use Forward Error Correction (FEC) algorithm to protect T.38 fax relay stream.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER redundancyPackets(0), fEC(1)  

faxRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.12
Fax Relay Redundancy Depth Number of repetitions to be applied to each fax relay payload when transmitting to network (applicable only when acTFaxModemCmdacTFaxModemSettings.T38FaxRelayProtectionMode=0).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

enhancedFaxRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.13
Enhanced Fax Relay Redundancy Depth Number of repetitions to be applied to control packets when using T.38 standard.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

modemRelayRedundancyDepth 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.14
Modem Relay Redundancy Depth Number of repetitions to be applied to each modem relay payload when transmitting to network.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

faxModemRelayVolume 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.15
Fax Modem Relay Volume Fax gain control. Range: -18 - 15 corresponding to -18.5 dBm to -3.5 dBm in 1 dB steps. The reason the range extends to 15 is for backward compatibility. (Default =6).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER -18..15  

faxModemBypassCoderType 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.16
Fax Modem Bypass Coder Type Coder to be used while performing fax/modem bypass. Usually, high bit rate coders such as G.711 and G.726/G.727 should be used. (Default = G.711 A-law).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER g711Alaw(0), g711Mulaw(1), g726-16(2), g726-24(3), g726-32(4), g726-40(5), g727-16(6), g727-24-16(7), g727-24(8), g727-32-16(9), g727-32-24(10), g727-32(11), g727-40-16(12), g727-40-24(13), g727-40-32(14), g723Low(15), g723High(16), g729(17), gSM(19), gSM610MS(20), transparent(22), g728(23), hDLCCoder(24), netCoder-4-8(25), netCoder-5-6(26), netCoder-6-4(27), netCoder-7-2(28), netCoder-8(29), netCoder-8-8(30), netCoder-9-6(31)  

faxModemBypassM 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.17
Fax Modem Bypass M Number of 20 msec payloads to be used for generating one RTP fax/modem bypass packet. Range: 1 - Until max Tx/Rx buffer size is reached
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

useT38orFRF11 1.3.6.1.4.1.5003.9.10.1.3.3.1.1.18
Use T38 or FRF11 Use T.38 protocol or proprietary FRF.11 syntax, to send/receive fax relay.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER fRF11(0), t38(1)  

dJBSettings 1.3.6.1.4.1.5003.9.10.1.3.4
OBJECT IDENTIFIER    

dJBSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.4.1
Data in dJB Settings Table uniquely identify jitter buffer parameters of channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DJBSettingsEntry

dJBSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.4.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  DJBSettingsEntry  

dJBufMinDelay 1.3.6.1.4.1.5003.9.10.1.3.4.1.1.1
[Millisec] Dynamic Jitter Buffer Minimum Delay. 0 - 150 (default =150)
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..150  

dJBufOptFactor 1.3.6.1.4.1.5003.9.10.1.3.4.1.1.2
Dynamic Jitter Buffer Optimization Factor. Dynamic jitter buffer frame error/delay optimization. 0 - 12 (default =7)
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..12  

channelTDMBusSettings 1.3.6.1.4.1.5003.9.10.1.3.5
OBJECT IDENTIFIER    

channelTDMBusSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.5.1
Data in channel TDM Bus Settings Table, uniquely identify TDM Bus sparameters of channel
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelTDMBusSettingsEntry

channelTDMBusSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.5.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  ChannelTDMBusSettingsEntry  

tDMBusInputPort 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.1
TDM Bus Input Port. Together with TDMBusInputChannel, defines the TDM bus timeslot to be used as input for this channel. Note that the valid region for this parameter varies according to the type of TDM bus used. When using TDMBusType=acFramers this parameter selects the trunkID, in which the incoming B-channel resides. 0-127.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..127  

tDMBusInputChannel 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.2
TDM Bus Input Channel. Together with TDMBusInputPort, defines the TDM bus timeslot to be used as input for this channel. Note that the valid region for this parameter varies according to the TDMBusSpeed. When using TDMBusType=acFramers, this parameter selects the incoming B-channel (in this case the valid region is 0-31).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..31  

tDMBusOutputDisable 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.3
TDM Bus Output Disable. 0: Places TDM bus output timeslot in tri-state mode. Ignored in case of PSTN interface. 1: Enables TDM bus output timeslot. Ignored in case of PSTN interface.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

tDMBusOutputPort 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.4
TDM Bus Output Port. Together with TDMBusOutputChannel, defines the TDM bus timeslot to be used as output for this channel. Note that the valid region for this parameter varies according to the type of TDM bus used. When this parameter is set to 0xff=255 the boardwise setting (set in acOpenBoard()) will be used. When using TDMBusType=acFramers, this parameter is ignored. 0-31 or 255.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

tDMBusOutputChannel 1.3.6.1.4.1.5003.9.10.1.3.5.1.1.5
TDM Bus Output Channel. Together with TDMBusOutputPort, defines the TDM bus timeslot to be used as output for this channel. Note that the valid region for this parameter varies according to the TDMBusSpeed. When using TDMBusType=acFramers, this parameter is ignored.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

transportSettings 1.3.6.1.4.1.5003.9.10.1.3.6
OBJECT IDENTIFIER    

transportSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.6.1
Data in Transport Table, uniquely identify Transport sparameters of channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TransportSettingsEntry

transportSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.6.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TransportSettingsEntry  

useNIorPCI 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.1
Description: Use NI or PCI interface. =1 if channel will use NI interface, =0 if PCI interface. 0- PCI interface: Compressed traffic will be sent/received through the PCI interface. 1- NI interface: RTP-RTCP packets sent/received to/from on board Ethernet interface. (default=1).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

disableSoftIPLoopback 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.2
Disable Soft IP Loopback =1 in order to diable soft IP loopback. 0- Enables the hair pin connection made in case two channels on the same board are connected together. 1- Disables the hair pin connection made in case two channels on the same board are connected together.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

uniDirectionalRTP 1.3.6.1.4.1.5003.9.10.1.3.6.1.1.3
uni Directional RTP. enables one sided RTP stream - according to niDirectionalRTPMode. enables the User to set the channel to work with unidirectional RTP streams. When UniDirectionalRTP is set to acRTPTxOnly, the receiver part of the channel will be disabled, and only the transmitter (encoder) will work. When UniDirectionalRTP is set to acRTPRxOnly, the transmitter part of the channel will be disabled, and only the receiver (decoder) will work. When UniDirectionalRTP is set to acRTPTxRx, both sides will be enabled. Users should note that when configuring a session between two endpoints, some of the channel configuration parameters must be identical on both sides. Such parameters are the voice coder type, the Fax/Modem transport type and bypass coders. All other configuration parameters are independent.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

rTPRTCPSettings 1.3.6.1.4.1.5003.9.10.1.3.7
OBJECT IDENTIFIER    

rTPRTCPSettingsTable 1.3.6.1.4.1.5003.9.10.1.3.7.1
Data in RTP-RTCP Table, uniquely identify RTP-RTCP sparameters of channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RTPRTCPSettingsEntry

rTPRTCPSettingsEntry 1.3.6.1.4.1.5003.9.10.1.3.7.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  RTPRTCPSettingsEntry  

cNAME 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.1
RTP Canonical Name. Should be unique among all participants within one RTP session. Refer to RFC1890 for more information. Up to 255 characters string. (default ='ChX', X=CID).
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

iPPrecedence 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.2
IP Precedence. Sets the value of the IP precedence field in the IP header for all the packets to be generated from this channel. Follow the acTIPPrecedence enumeration. Valid Range: 0-7 (default =0)
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..7  

iPTOS 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.3
iP Type Of Service. sets the value of the IP Type Of Service field in the IP header for all the packets to be generated from this channel. acNormalServiceTOS=0, acMinimizeMonetaryCostTOS=1, acMaximizeReliabilityTOS=2, acMaximizeThroughputTOS=4, acMinimizeDelayTOS=8 (Follow the acTIPTOS enumeration).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..15  

localRTPPort 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.4
Local RTP Port. Local UDP Port to be used for incoming RTP stream to this channel. This parameter also sets the local RTCP and local T.38 ports in offset of 1,2 from LocalRTPPort respectively. The local RTP port must be a number dividable by 10 and must reside within the following range BoardParams.BaseUDPPort-> BoardParams.BaseUDPPort +10*MAX_CID_NUM.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

remoteRTPAddr 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.5
Remote RTP Address
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

remoteRTPPort 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.6
IP/UDP Address of the remote endpoint RTP port
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

remoteT38Addr 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.7
remote T38 Address
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

remoteT38Port 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.8
IP/UDP Address of the remote endpoint T.38 port
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

rTCPMeanTxInterval 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.9
RTCP Mean Tx Interval. Mean interval [msec] between channel's RTCP reports.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 100..2147483647  

rxRTPPayloadType 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.10
Rx RTP Payload Type -1 = use the default coder RTP payload type for incoming voice packets. -2 = allow any RTP payload type for incoming packets. Otherwise, = sets the RTP payload type to be used for incoming voice packets (this will override the default RTP payload type defined for each coder). Valid Range: -1/-2 or any unoccupied RTPPT in the range 0-127 . (default =-1).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER -2..127  

txRTPPayloadType 1.3.6.1.4.1.5003.9.10.1.3.7.1.1.11
Tx RTP Payload Type -1 = use the default coder RTP payload type for incoming voice packets. -2 = allow any RTP payload type for incoming packets. Otherwise, = sets the RTP payload type to be used for incoming voice packets (this will override the default RTP payload type defined for each coder). Valid Range: -1/-2 or any unoccupied RTPPT in the range 0-127. (default =-1).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER -2..127  

channelStatus 1.3.6.1.4.1.5003.9.10.1.4
OBJECT IDENTIFIER    

channelStatusTable 1.3.6.1.4.1.5003.9.10.1.4.1
Data in voice SettingsTable uniquely identify a voice parameters of channel.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ChannelStatusEntry

channelStatusEntry 1.3.6.1.4.1.5003.9.10.1.4.1.1
Tok_String
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  ChannelStatusEntry  

rTPActive 1.3.6.1.4.1.5003.9.10.1.4.1.1.1
RTP Active
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER notActive(0), active(1)  

bypassNIC 1.3.6.1.4.1.5003.9.10.1.4.1.1.2
Bypass NIC
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

pendingIdle 1.3.6.1.4.1.5003.9.10.1.4.1.1.3
Pending Idle
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

txSilencePeriod 1.3.6.1.4.1.5003.9.10.1.4.1.1.4
Tx Silence Period
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

rxSilencePeriod 1.3.6.1.4.1.5003.9.10.1.4.1.1.5
Rx Silence Period
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

txFaxMode 1.3.6.1.4.1.5003.9.10.1.4.1.1.6
Tx Fax Mode
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

rxFaxMode 1.3.6.1.4.1.5003.9.10.1.4.1.1.7
Rx Fax Mode
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

txDTMFPeriod 1.3.6.1.4.1.5003.9.10.1.4.1.1.8
Tx DTMF Period
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

rxDTMFPeriod 1.3.6.1.4.1.5003.9.10.1.4.1.1.9
Rx DTMF Period
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

packetsToDSPCnt 1.3.6.1.4.1.5003.9.10.1.4.1.1.10
Jitter Buffer Error Counter
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufErrorCnt 1.3.6.1.4.1.5003.9.10.1.4.1.1.11
Jitter Buffer Forced Packet count
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufForcedPacketLost 1.3.6.1.4.1.5003.9.10.1.4.1.1.12
Jitter Buffer Forced Packet Lost
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufForcedPacketAddition 1.3.6.1.4.1.5003.9.10.1.4.1.1.13
Jitter Buffer Forced Packet Addition
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufUnderRunCnt 1.3.6.1.4.1.5003.9.10.1.4.1.1.14
Jitter Buffer Under-Run Counter
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufOverRunCnt 1.3.6.1.4.1.5003.9.10.1.4.1.1.15
Jitter Buffer Over-Run Counter
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

jitterBufAccumDelay 1.3.6.1.4.1.5003.9.10.1.4.1.1.16
Jitter Buffer accumulation Delay. In packets.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER 0..2147483647  

fXSorFXO 1.3.6.1.4.1.5003.9.10.1.4.1.1.17
returns the type phisical type of endpoint
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER nonAnalogDevice(-1), fXO(0), fXS(1)  

channelHookState 1.3.6.1.4.1.5003.9.10.1.4.1.1.18
Channel Hook State
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER nonAnalogDevice(-1), offHook(0), onHook(1)  

notifications 1.3.6.1.4.1.5003.9.10.1.5
OBJECT IDENTIFIER    

reset 1.3.6.1.4.1.5003.9.10.1.6
OBJECT IDENTIFIER    

remoteReset 1.3.6.1.4.1.5003.9.10.1.6.1
remote Reset. To remote reset the board, set an integer value to this parameter. Note: Before Reset, The current boardConfiguration parameters will be burned to the board.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

acSetDefaults 1.3.6.1.4.1.5003.9.10.1.6.2
To set the default values, set an integer value to this parameter
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 1..2147483647  

acgwAdminState 1.3.6.1.4.1.5003.9.10.1.6.3
Determines the gateway's operational state. 0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl 1 - shuttingDown: (read only) Graceful Shutdown is being carried out 2 - unlocked: GW is in service.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER locked(0), shuttingDown(1), unlocked(2)  

acgwAdminStateLockControl 1.3.6.1.4.1.5003.9.10.1.6.4
(in sec) time left for the graceful shutdown to complete. -1 indicates unlimited time frame. 0 indicates immediate (forced) lock. Implementing the control requires setting acgwAdminState to locked.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER -1..65535  

acSaveConfigToSystem 1.3.6.1.4.1.5003.9.10.1.6.5
This will save all current configuration in the board onto the flash. Any digit will call on the function. NOTE: Do NOT save the configuration while voice is running - this will cause a delay.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..2147483647  

acOperationalState 1.3.6.1.4.1.5003.9.10.1.6.6
The operational state of the gateway.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

remoteResetControl 1.3.6.1.4.1.5003.9.10.1.6.7
Determine the remote reset action 1 - burn staged load image, if any, and config to flash, perform a reset, and load from flash 2 - perform a reset, and load from flash (staged load image, if any, and config is not burned to flash) 3 - perform a reset, and load from bootp/tftp (staged load image, if any, and config burn is not needed) * - an error is returned for any other value Note: The staged load image is an image of a cmp file that was previously loaded to a area in RAM via an HTTP upload
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER resetFromFlashAfterBurn(1), resetFromFlashNoBurn(2), resetFromBootP(3)  

acTrap 1.3.6.1.4.1.5003.9.10.1.21
OBJECT IDENTIFIER    

acBoardTrapGlobals 1.3.6.1.4.1.5003.9.10.1.21.1
OBJECT IDENTIFIER    

acBoardTrapGlobalsName 1.3.6.1.4.1.5003.9.10.1.21.1.1
trap name
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..1000  

acBoardTrapGlobalsTextualDescription 1.3.6.1.4.1.5003.9.10.1.21.1.2
title of trap
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..200)  

acBoardTrapGlobalsSource 1.3.6.1.4.1.5003.9.10.1.21.1.3
Trap Source - MG1/Shelf1/Board2/Trunk3
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

acBoardTrapGlobalsSeverity 1.3.6.1.4.1.5003.9.10.1.21.1.4
Trap Severity
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER cleared(0), indeterminate(1), warning(2), minor(3), major(4), critical(5)  

acBoardTrapGlobalsUniqID 1.3.6.1.4.1.5003.9.10.1.21.1.5
Trap Uniq Id - generated by AcBoard and should be uniq for the entire EMS
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER 0..32000  

acBoardTrapGlobalsType 1.3.6.1.4.1.5003.9.10.1.21.1.6
Trap type - ItuAlarmType
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(0), communicationsAlarm(1), qualityOfServiceAlarm(2), processingErrorAlarm(3), equipmentAlarm(4), environmentalAlarm(5)  

acBoardTrapGlobalsProbableCause 1.3.6.1.4.1.5003.9.10.1.21.1.7
Trap probable cause - SnmpAlarmProbableCause
Status: deprecated Access: read-only
OBJECT-TYPE    
  INTEGER other(0), adapterError(1), applicationSubsystemFailure(2), bandwidthReduced(3), callEstablishmentError(4), communicationsProtocolError(5), communicationsSubsystemFailure(6), configurationOrCustomizationError(7), congestion(8), corruptData(9), cpuCyclesLimitExceeded(10), dataSetOrModemError(11), degradedSignal(12), dteDceInterfaceError(13), enclosureDoorOpen(14), equipmentMalfunction(15), excessiveVibration(16), fileError(17), fireDetected(18), floodDetected(19), framingError(20), heatingVentCoolingSystemProblem(21), humidityUnacceptable(22), inputOutputDeviceError(23), inputDeviceError(24), lanError(25), leakDetected(26), localNodeTransmissionError(27), lossOfFrame(28), lossOfSignal(29), materialSupplyExhausted(30), multiplexerProblem(31), outOfMemory(32), ouputDeviceError(33), performanceDegraded(34), powerProblem(35), pressureUnacceptable(36), processorProblem(37), pumpFailure(38), queueSizeExceeded(39), receiveFailure(40), receiverFailure(41), remoteNodeTransmissionError(42), resourceAtOrNearingCapacity(43), responseTimeExecessive(44), retransmissionRateExcessive(45), softwareError(46), softwareProgramAbnormallyTerminated(47), softwareProgramError(48), storageCapacityProblem(49), temperatureUnacceptable(50), thresholdCrossed(51), timingProblem(52), toxicLeakDetected(53), transmitFailure(54), transmitterFailure(55), underlyingResourceUnavailable(56), versionMismatch(57), authenticationFailure(58), breachOfConfidentiality(59), cableTamper(60), delayedInformation(61), denialOfService(62), duplicateInformation(63), informationMissing(64), informationModificationDetected(65), informationOutOfSequence(66), intrusionDetection(67), keyExpired(68), nonRepudiationFailure(69), outOfHoursActivity(70), outOfService(71), proceduralError(72), unauthorizedAccessAttempt(73), unexpectedInformation(74)  

acBoardTrapGlobalsAdditionalInfo1 1.3.6.1.4.1.5003.9.10.1.21.1.8
Trap additional info global field
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

acBoardTrapGlobalsAdditionalInfo2 1.3.6.1.4.1.5003.9.10.1.21.1.9
Trap additional info global field
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

acBoardTrapGlobalsAdditionalInfo3 1.3.6.1.4.1.5003.9.10.1.21.1.10
Trap additional info global field
Status: deprecated Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..100)  

acBoardTrapGlobalsDateAndTime 1.3.6.1.4.1.5003.9.10.1.21.1.11
Date and time that the trap was sent.
Status: deprecated Access: read-only
OBJECT-TYPE    
  DateAndTime  

acBoardTrapDefinitions 1.3.6.1.4.1.5003.9.10.1.21.2
OBJECT IDENTIFIER    

acBoardFatalError 1.3.6.1.4.1.5003.9.10.1.21.2.0.1
Board fatal error
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardConfigurationError 1.3.6.1.4.1.5003.9.10.1.21.2.0.2
Configuration Error
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardTemperatureAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.3
Temperature Alarm. Turned on when temperature exceeds 60 degrees Celsius, and relaxes when temperature goes under 55 again.
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardEvBoardStarted 1.3.6.1.4.1.5003.9.10.1.21.2.0.4
Initialization Ended
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardEvResettingBoard 1.3.6.1.4.1.5003.9.10.1.21.2.0.5
The board start Reset process - following software reset
Status: current Access: read-only
NOTIFICATION-TYPE    

acFeatureKeyError 1.3.6.1.4.1.5003.9.10.1.21.2.0.6
Feature key related Error
Status: current Access: read-only
NOTIFICATION-TYPE    

acgwAdminStateChange 1.3.6.1.4.1.5003.9.10.1.21.2.0.7
The administrative state of the gate way has been changed to a new state.
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardCallResourcesAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.8
No free channels available
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardControllerFailureAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.9
The GK/Proxy not found or registration failed. internal routing table may be used for routing
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardEthernetLinkAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.10
Ethernet Link is down or remote Ethernet link is down and board has no communication to any other host
Status: current Access: read-only
NOTIFICATION-TYPE    

acBoardOverloadAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.11
Overload in one or some of the system's components
Status: current Access: read-only
NOTIFICATION-TYPE    

acActiveAlarmTableOverflow 1.3.6.1.4.1.5003.9.10.1.21.2.0.12
An active alarm could not be placed in the active alarm table because the table is full. This alarm will not clear. Reboot is the only way to completely clear the Active Alarm table overflow problem. Any alarm raised at this state will not be Carrier Grade compatible. Therefore, Updates will not clear the alarm before changing the bindings and re-raising alarms. The History tables remain unaffected. All Alarms raised prior to overflow will remain Carrier Grade compatible. Other alarms, raised after this alarm was raised, that are placed in the Active Alarm table will be Carrier Grade compatible. (This is for when after the alarm was raised there were some clears, clearing alarms off the Active Alarm table).
Status: current Access: read-only
NOTIFICATION-TYPE    

acAtmPortAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.13
ATM Port Alarm
Status: current Access: read-only
NOTIFICATION-TYPE    

acAudioProvisioningAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.14
This alarm is raised if the Media Server is unable to provision its audio. This could be because the Audio Provisioning System (APS) is down or there is a network problem.
Status: current Access: read-only
NOTIFICATION-TYPE    

acOperationalStateChange 1.3.6.1.4.1.5003.9.10.1.21.2.0.15
This alarm is raised if the operational state of the node goes to disabled. The alarm is cleared when the operational state of the node goes to enabled.
Status: current Access: read-only
NOTIFICATION-TYPE    

acKeepAlive 1.3.6.1.4.1.5003.9.10.1.21.2.0.16
This trap is the NAT Traversal keep alive trap. If the STUN application in the device detects a NAT then this trap will be sent out on a regular time laps - 9/10 of the acSysSTUNBindingLifeTime object. The AdditionalInfo1 varbind has the MAC address of the device. Note that all traps are sent out from the SNMP Port (usually 161).
Status: current Access: read-only
NOTIFICATION-TYPE    

acNATTraversalAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.17
When the NAT placed in front a device is identified as a symmetric NAT - this alarm is raised. It is cleared when a non-symmetric NAT or no NAT replace the symmetric one.
Status: current Access: read-only
NOTIFICATION-TYPE    

acEnhancedBITStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.18
This trap is used to for the status of the BIT (Built In Test). The information in the trap contains board HW elements being tested and their status. The information is presented in the additional info fields.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7LinkStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.19
This alarm is raised if the operational state of the SS7 link becomes XXXX. The alarm is cleared when the operational state of the link becomes XXXX.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7LinkInhibitStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.20
This alarm is raised if the SS7 link becomes inhibited (local or remote). The alarm is cleared when the link becomes uninhibited - local AND remote. Note that this alarm will be raised for any change in the remote or local inhibition status.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7LinkBlockStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.21
This alarm is raised if the SS7 link becomes blocked (local or remote). The alarm is cleared when the link becomes unblocked - local AND remote. Note that this alarm will be raised for any change in the remote or local blocking status.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7LinkCongestionStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.22
This alarm is raised if the SS7 link becomes congested (local or remote). The alarm is cleared when the link becomes uncongested - local AND remote. Note that this alarm will be raised for any change in the remote or local congestion status.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7LinkSetStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.23
This alarm is raised if the operational state of the SS7 linkset becomes BUSY. The alarm is cleared when the operational state of the linkset becomes IN-SERVICE or OFFLINE.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7RouteSetStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.24
This alarm is raised if the operational state of the SS7 routeset becomes BUSY. The alarm is cleared when the operational state of the routeset becomes IN-SERVICE or OFFLINE.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7SNSetStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.25
This alarm is raised if the operational state of the SS7 node becomes BUSY. The alarm is cleared when the operational state of the node becomes IN-SERVICE or OFFLINE.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7RedundancyAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.26
Raised when the SS7 redundancy degregated. Cleared when all entities of redundancy are fully functional and in serveice.
Status: current Access: read-only
NOTIFICATION-TYPE    

acPerformanceMonitoringThresholdCrossing 1.3.6.1.4.1.5003.9.10.1.21.2.0.27
This log trap is sent out for every time the threshold of a Performance Monitored object is crossed. The severity field is 'indeterminate' when the crossing is above the threshold and 'cleared' when it goes back under the threshold. The 'source' varbind in the trap indicates the object for which the threshold is being crossed.
Status: current Access: read-only
NOTIFICATION-TYPE    

acHTTPDownloadResult 1.3.6.1.4.1.5003.9.10.1.21.2.0.28
This trap indicates the result of a recent file download (includes HTTP error code, if available).
Status: current Access: read-only
NOTIFICATION-TYPE    

acFanTrayAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.29
This alarm is raised when the fan tray is missing or some of the fans are faulty. If the fan tray is missing or more then X fans are faulty the severity will be Critical. If more then one and less the X fans are faulty the severity will be Major.
Status: current Access: read-only
NOTIFICATION-TYPE    

acPowerSupplyAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.30
This alarm is raised when the HA (High Availability) feature is active and one of the power supply units is faulty.
Status: current Access: read-only
NOTIFICATION-TYPE    

acPEMAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.31
This alarm is raised when the HA (High Availability) feature is active. The severity is critical if one of the PEM units is missing and major if the electric wire to one of the units is disconnected.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSAMissingAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.32
This alarm is raised when the SA module in the M3K MG is missing. Whenthere is no SAT there are no other chassis HW related alarms. Note - relevant only for M3K.
Status: current Access: read-only
NOTIFICATION-TYPE    

acHASystemFaultAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.33
This alarm is raised when the HA (High Availability) feature is active and the system is NOT HA. Critical severity - 1.Wrong HW Configuration. 2. Redundant module is missing (not in slot). 3. The redundant module is non operable. Minor severity - waiting for redunadant to connect (after reset!).
Status: current Access: read-only
NOTIFICATION-TYPE    

acHASystemConfigMismatchAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.34
This alarm is raised when the HA (High Availability) feature is active and there has been a configuration change due to which the HA system may or may not be usable.
Status: current Access: read-only
NOTIFICATION-TYPE    

acHASystemSwitchOverAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.35
This alarm is raised when the HA (High Availability) feature is active and there has been a switchover due to failure or reset in the active module.
Status: current Access: read-only
NOTIFICATION-TYPE    

acUserInputAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.36
This Alarm is raised when the input dry contact is short circuited. Cleared when the circuit is reopened.
Status: current Access: read-only
NOTIFICATION-TYPE    

acDChannelStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.37
This non alarm trap is sent when establishment, re-establishment or release of LAPD link with its peer connection occurs. The trap will be sent out with one of the following in the textual description: D-channel synchronized D-channel not-synchronized
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetSectionLOFAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.38
SONET section Loss of Frame alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetSectionLOSAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.39
SONET section Loss of Signal alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetLineAISAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.40
SONET Line AIS alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetLineRDIAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.41
SONET Line RDI alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetIfHwFailureAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.42
SONET or SDH medium Interface has failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

acHwFailureAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.43
HW failure alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acH248LostConnectionWithCA 1.3.6.1.4.1.5003.9.10.1.21.2.0.44
H248 lost connection with call agent
Status: current Access: read-only
NOTIFICATION-TYPE    

acDialPlanFileReplaced 1.3.6.1.4.1.5003.9.10.1.21.2.0.45
dial plan file replaced notification
Status: current Access: read-only
NOTIFICATION-TYPE    

acAnalogPortSPIOutOfService 1.3.6.1.4.1.5003.9.10.1.21.2.0.46
Analog port out of service
Status: current Access: read-only
NOTIFICATION-TYPE    

acAnalogPortHighTemperature 1.3.6.1.4.1.5003.9.10.1.21.2.0.47
Analog Port High Temperature
Status: current Access: read-only
NOTIFICATION-TYPE    

acHitlessUpdateStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.48
Notification trap that is sent out at the beginning and the end of a Hitless SW update. Failure during the process will also instigate the trap. Relevant to HA systems only.
Status: current Access: read-only
NOTIFICATION-TYPE    

acTrunksAlarmNearEndLOS 1.3.6.1.4.1.5003.9.10.1.21.2.0.49
Loss of signal at trunk's near end.
Status: current Access: read-only
NOTIFICATION-TYPE    

acTrunksAlarmNearEndLOF 1.3.6.1.4.1.5003.9.10.1.21.2.0.50
Loss of frame at trunk's near end.
Status: current Access: read-only
NOTIFICATION-TYPE    

acTrunksAlarmRcvAIS 1.3.6.1.4.1.5003.9.10.1.21.2.0.51
Received AIS from trunk's far end.
Status: current Access: read-only
NOTIFICATION-TYPE    

acTrunksAlarmFarEndLOF 1.3.6.1.4.1.5003.9.10.1.21.2.0.52
Loss of frame at trunk's far end.
Status: current Access: read-only
NOTIFICATION-TYPE    

acIPv6ErrorAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.53
Alarm trap that is sent out for IPv6 related errors.
Status: current Access: read-only
NOTIFICATION-TYPE    

acAMSProcedureResult 1.3.6.1.4.1.5003.9.10.1.21.2.0.54
AMS procedure related information
Status: current Access: read-only
NOTIFICATION-TYPE    

acWeakRedundancy 1.3.6.1.4.1.5003.9.10.1.21.2.0.55
The system is in weak redundancy mode. Switch over is done with a reset to the board taking over.
Status: current Access: read-only
NOTIFICATION-TYPE    

acTMInconsistentRemoteAndLocalPLLStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.56
Inconsistent Remote And Local PLL Status
Status: current Access: read-only
NOTIFICATION-TYPE    

acTMReferenceStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.57
Timing manager reference status
Status: current Access: read-only
NOTIFICATION-TYPE    

acTMReferenceChange 1.3.6.1.4.1.5003.9.10.1.21.2.0.58
Timing manager reference Change
Status: current Access: read-only
NOTIFICATION-TYPE    

acGWSASEmergencyModeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.59
The alarm is raised when SAS enters the Emergency Mode and then cleared when SAS enters Normal Mode again.
Status: current Access: read-only
NOTIFICATION-TYPE    

acV52InterfaceAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.60
The alarm is raised for v5.2 interface errors and alarms.{@}For a detailed list of the interfaces' alarms see the acV5InterfceTable.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetPathSTSLOPAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.61
Sonet Path STS LOP alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetPathSTSAISAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.62
Sonet Path STS AIS alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetPathSTSRDIAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.63
Sonet Path STS RDI alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetPathUnequippedAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.64
Sonet Path Unequipped alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSonetPathSignalLabelMismatchAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.65
Sonet Path Signal Label Mismatch alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acDS3RAIAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.66
DS3 RAI alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acDS3AISAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.67
DS3 AIS alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acDS3LOFAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.68
DS3 LOF alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acDS3LOSAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.69
DS3 LOS alarm.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSWUpgradeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.70
Raised for SW upgrade process errors.
Status: current Access: read-only
NOTIFICATION-TYPE    

acNTPServerStatusAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.71
NTP server status alarm. {@}Raised when the connection to the NTP server is lost. Cleared when the connection is reestablished. {@}Unset time (as a result of no connection to NTP server) may result with functionality degradation and failure in device.
Status: current Access: read-only
NOTIFICATION-TYPE    

acThreeWayConferenceOutOfResources 1.3.6.1.4.1.5003.9.10.1.21.2.0.72
Three way conference out of resources.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7AliasPcStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.73
raised when the Alias PC is in BUSY state. Cleared when it is in In-Service state.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSS7UalGroupStateChangeAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.74
Raised when the Ual Group Asp state is not ACTIVE. Cleared when it is Active.
Status: current Access: read-only
NOTIFICATION-TYPE    

acLDAPLostConnection 1.3.6.1.4.1.5003.9.10.1.21.2.0.75
Raised when there is no connection to the LDAP server.
Status: current Access: read-only
NOTIFICATION-TYPE    

acAnalogPortGroundFaultOutOfService 1.3.6.1.4.1.5003.9.10.1.21.2.0.76
Raised when the MP500 FXS port is inactive due to ground fault.
Status: current Access: read-only
NOTIFICATION-TYPE    

acSSHConnectionStatus 1.3.6.1.4.1.5003.9.10.1.21.2.0.77
This trap indicates the result of a recent SSH connection attempt.
Status: current Access: read-only
NOTIFICATION-TYPE    

acOCSPServerStatusAlarm 1.3.6.1.4.1.5003.9.10.1.21.2.0.78
raised when OCSP connection is not available.
Status: current Access: read-only
NOTIFICATION-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor