AWCVX-MIB

File: AWCVX-MIB.mib (263609 bytes)

Imported modules

SNMPv2-SMI-v1 BRIDGE-MIB SNMPv2-TC-v1
RFC1213-MIB RFC1155-SMI RFC-1212
RFC-1215

Imported symbols

enterprises dot1dTpPort DisplayString
RowStatus MacAddress TruthValue
ifIndex Counter Gauge
IpAddress OBJECT-TYPE TRAP-TYPE

Defined Types

AwcVlanId  
INTEGER 0..4094    

AwcPolId  
INTEGER 0..1023    

WEPKeytype128  
OCTET STRING Size(5..13)    

AwcInvokeCommand  
INTEGER inactive(1), start(2), startNotify(3), restart(4), restartNotify(5), cancel(6)    

AwcDot11MicAlgorithm  
INTEGER micNone(1), micMMH(2)    

AwcDot11WEPKeyPermuteAlgorithm  
INTEGER wepPermuteNone(1), wepPermuteIV(2)    

AwcEventDisposition  
INTEGER count(1), displayConsole(2), record(3), notify(4)    

AwcDot11EventDisposition  
INTEGER noNotification(1), eventLogOnly(2), ieeeTrapOnly(3), eventLogAndIeeeTrap(4)    

AwcHotStandbyStatus  
INTEGER normal(0), initializing(1), takeover(2), stopped(3), associating(4), rootMacFailed(5), interfaceMerge(6), associationFail(7), etherTestFail(8), radioTestFail(9), error(10)    

AwcTpFdbClassID  
INTEGER unknown(1), multicast(2), dsHost(3), bridgeHost(4), clientStation(5), bridge(6), repeater(7), accessPoint(8), bridgeRoot(9)    

AwcDdpProdDevID  
INTEGER tokenRingAP(74), ethernetAP(76), ethernetBridge(77), tokenRingBridge(78), pc3000Client(84), serialUC(85), ethernetUC(86), pc3500Client(101), pc4500Client(102), generic80211Client(104), pc4800Client(109), pc3100Client(110), mc(111), ethernetClient(112), pc2500Client(113), pc4800bClient(117), euc(120), homeAP(121), eucNoDiversity(122), emcNoDiversity(123), emc(124), series350Client(127), series370Client(128), multicast(240), unknown(241), tokenRingHost(253), ethernetHost(255)    

AwcDdpRadioDevID  
INTEGER unknown(0), tma900(1), tma2400(2), pc3500(3), pc3000(4), tma2040(5), pc4500(6), pc4800(12), pc3100(13), series350(34), series370(35)    

AwcDot11ClientState  
INTEGER state0(1), state1(2), state2(3), state3(4)    

AwcEventSeverity  
INTEGER systemFatal(2), protocolFatal(3), portFatal(4), systemAlert(5), protocolAlert(6), portAlert(7), externalAlert(8), systemWarning(9), protocolWarning(10), portWarning(11), externalWarning(12), systemInfo(13), protocolInfo(14), portInfo(15), externalInfo(16)    

AwcHotStandbyState  
INTEGER running(0), initializing(1), stopped(2), notRunning(3)    

AwcPfDisposition  
INTEGER forward(1), block(2), default(3)    

AwcPfPriority  
INTEGER default(1), background(2), spare(3), excellentEffort(4), controlledLoad(5), interactiveVideo(6), interactiveVoice(7), networkControl(8)    

BootconfigNameServerEntry  
SEQUENCE    
  bootconfigNameServerPriority INTEGER
  bootconfigNameServer IpAddress

AwcSerialConfigEntry  
SEQUENCE    
  serialDevIndex INTEGER
  serialAdminStatus INTEGER
  serialOperStatus INTEGER
  serialBaud Gauge
  serialParity INTEGER
  serialDataBits Gauge
  serialStopBits Gauge
  serialFlowControl INTEGER
  serialTerminalType INTEGER
  serialTerminalLines Gauge
  serialTerminalColumns Gauge
  serialDevFd INTEGER

AwcIfEntry  
SEQUENCE    
  awcIfDefaultPhysAddress MacAddress
  awcIfPhysAddress MacAddress
  awcIfAdoptPrimaryIdentity TruthValue
  awcIfDefaultIpAddress IpAddress
  awcIfDefaultIpNetMask IpAddress
  awcIfIpAddress IpAddress
  awcIfIpNetMask IpAddress
  awcIfMSDUMaxLength Gauge
  awcIfOutDiscardsCoS0 Counter
  awcIfOutDiscardsCoS1 Counter
  awcIfOutDiscardsCoS2 Counter
  awcIfOutDiscardsCoS3 Counter
  awcIfOutDiscardsCoS4 Counter
  awcIfOutDiscardsCoS5 Counter
  awcIfOutDiscardsCoS6 Counter
  awcIfOutDiscardsCoS7 Counter

AwcDot11StationConfigEntry  
SEQUENCE    
  awcDot11StationRole INTEGER
  awcDot11PowerManagementSubMode Gauge
  awcDot11UseAWCExtensions TruthValue
  awcDot11AllowAssocBroadcastSSID TruthValue
  awcDot11PrivacyOptionImplementedMaxRate INTEGER
  awcDot11DesiredBSSLength INTEGER
  awcDot11EnetEncapsulationDefault INTEGER
  awcDot11ForceReqFirmwareVersion TruthValue
  awcDot11BridgeSpacing Gauge
  awcDot11DesiredSSIDMaxAssociatedSTA INTEGER
  awcDot11DesiredSSIDNumAssociatedSTA INTEGER
  awcDot11AuxiliarySSIDLength INTEGER
  awcDot11MultipleSSIDPerBSSImplemented TruthValue
  awcDot11SymbolExtensionsImplemented TruthValue
  awcDot11SymbolExtensionsEnabled TruthValue
  awcDot11DesiredSSIDMicAlgorithm AwcDot11MicAlgorithm
  awcDot11DesiredSSIDWEPKeyPermuteAlgorithm AwcDot11WEPKeyPermuteAlgorithm
  awcDot11DesiredSSIDInfrastructureWGB TruthValue
  awcDot11DesiredSSIDDefaultPolId AwcPolId
  awcDot11DesiredSSIDDefaultVlanId AwcVlanId
  awcDot11DesiredSSIDEnableProxyMobileIP TruthValue
  awcDot11InfrastructureSSID INTEGER
  awcDot11QBSSElementImplemented TruthValue
  awcDot11QBSSElementEnabled TruthValue
  awcDot11InfrastructureSSIDExclusive TruthValue
  awcDot11SendIGMPGeneralQuery TruthValue
  awcDot11NonRootMobility INTEGER

AwcDot11AuthenticationAlgorithmsEntry  
SEQUENCE    
  awcDot11AuthenticationAlgorithmsIndex INTEGER
  awcDot11AuthenticationRequireEAP TruthValue
  awcDot11AuthenticationDefaultUcastAllowedToGoTo OCTET STRING

AwcDot11WEPDefaultKeysEntry  
SEQUENCE    
  awcDot11WEPDefaultKeyIndex INTEGER
  awcDot11WEPDefaultKeyLen INTEGER
  awcDot11WEPDefaultKeyValue WEPKeytype128

AwcDot11PrivacyEntry  
SEQUENCE    
  awcDot11WEPDefaultKeyMaxIndex INTEGER
  awcDot11AllowEncrypted TruthValue
  awcDot11WEPKeyMaxLen INTEGER
  awcDot11LEAPUserName OCTET STRING
  awcDot11LEAPPassword OCTET STRING

AwcDot11DesiredBSSEntry  
SEQUENCE    
  awcDot11DesiredBSSIndex INTEGER
  awcDot11DesiredBSS MacAddress

AwcDot11AuxiliarySSIDEntry  
SEQUENCE    
  awcDot11AuxSSIDIndex INTEGER
  awcDot11AuxSSID OCTET STRING
  awcDot11AuxSSIDMaxAssociatedSTA INTEGER
  awcDot11AuxSSIDNumAssociatedSTA INTEGER
  awcDot11AuxSSIDDefaultPolId AwcPolId
  awcDot11AuxSSIDDefaultVlanId AwcVlanId
  awcDot11AuxSSIDEnableProxyMobileIP TruthValue

AwcDot11AuxSSIDAuthAlgEntry  
SEQUENCE    
  awcDot11AuxSSIDAuthAlgIndex INTEGER
  awcDot11AuxSSIDAuthAlgEnable TruthValue
  awcDot11AuxSSIDAuthAlgRequireEAP TruthValue
  awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo OCTET STRING

AwcDot11AssignedAIDEntry  
SEQUENCE    
  awcDot11AssignedAID INTEGER
  awcDot11AssignedSTA MacAddress

AwcDot11AccessPointCountersEntry  
SEQUENCE    
  awcDot11AssociatedStationCount Counter
  awcDot11AuthenticatedStationCount Counter
  awcDot11ReassociatedStationCount Counter
  awcDot11RoamedStationCount Counter
  awcDot11DeauthenticateCount Counter
  awcDot11DisassociateCount Counter
  awcDot11EncapPktsMMH Counter
  awcDot11DecapPktsMMH Counter
  awcDot11EncapErrorsMMH Counter
  awcDot11DecapErrorsMMH Counter
  awcDot11DecapExistsMMH Counter
  awcDot11DecapAccessMMH Counter

AwcDot11CountersEntry  
SEQUENCE    
  awcDot11TxDeferEnergyCount Counter
  awcDot11RxMacCrcErrorCount Counter
  awcDot11SsidMismatchCount Counter

AwcDot11QoSEntry  
SEQUENCE    
  awcDot11QoSCoS INTEGER
  awcDot11QoSCWmin INTEGER
  awcDot11QoSCWmax INTEGER

AwcDot11ResourceInfoEntry  
SEQUENCE    
  awcDot11FirmwareBootstrapVersion DisplayString

AwcDot11PhyOperationEntry  
SEQUENCE    
  awcDot11CurrentCarrierSet INTEGER
  awcDot11ModulationType INTEGER
  awcDot11PreambleType INTEGER
  awcDot11PHYType INTEGER

AwcDot11PhyFHSSEntry  
SEQUENCE    
  awcDot11Compatible3100 TruthValue

AwcDot11PhyDSSSEntry  
SEQUENCE    
  awcDot11Compatible4500 TruthValue
  awcDot11ChannelAutoImplemented TruthValue
  awcDot11ChannelAutoEnabled TruthValue
  awcDot11CurrentChannel INTEGER

AwcDot11SupportedDataRatesPrivacyEntry  
SEQUENCE    
  awcDot11SupportedDataRatesPrivacyIndex INTEGER
  awcDot11SupportedDataRatesPrivacyValue INTEGER
  awcDot11SupportedDataRatesPrivacyImplemented TruthValue

AwcDot11ChanSelectEntry  
SEQUENCE    
  awcDot11ChanSelectChannel INTEGER
  awcDot11ChanSelectEnable TruthValue

UserMgrConfigEntry  
SEQUENCE    
  userMgrUserIndex Gauge
  userMgrUserName DisplayString
  userMgrPassword OCTET STRING
  userMgrCapabilities Gauge
  userMgrStatus RowStatus

ResolverDomainServerEntry  
SEQUENCE    
  resolverDomainServerPriority INTEGER
  resolverDomainServer DisplayString

DefaultResolverDomainServerEntry  
SEQUENCE    
  defaultResolverDomainServerPriority INTEGER
  defaultResolverDomainServer DisplayString

AwcTpFdbEntry  
SEQUENCE    
  awcTpFdbAddress MacAddress
  awcTpFdbClassID AwcTpFdbClassID
  awcTpFdbSrcPktsImmed Counter
  awcTpFdbSrcOctetsImmed Counter
  awcTpFdbSrcErrorPktsImmed Counter
  awcTpFdbSrcErrorOctetsImmed Counter
  awcTpFdbDestPktsImmed Counter
  awcTpFdbDestOctetsImmed Counter
  awcTpFdbDestErrorPktsImmed Counter
  awcTpFdbDestErrorOctetsImmed Counter
  awcTpFdbDestMaxRetryErrorsImmed Counter
  awcTpFdbIPv4Addr IpAddress

AwcTpFdbDdpEntry  
SEQUENCE    
  awcTpFdbDdpAddress MacAddress
  awcTpFdbDdpSysName DisplayString
  awcTpFdbDdpProdDevID AwcDdpProdDevID
  awcTpFdbDdpRadioDevID AwcDdpRadioDevID
  awcTpFdbDdpSwVerMajor INTEGER
  awcTpFdbDdpSwVerMinor INTEGER
  awcTpFdbDdpSwVerBeta INTEGER
  awcTpFdbDdpUptime Gauge
  awcTpFdbDdpNumAnnounceSent Gauge
  awcTpFdbDdpNumAssociated INTEGER
  awcTpFdbDdpLoad INTEGER
  awcTpFdbDdpDistFromDS INTEGER

AwcDot11TpFdbEntry  
SEQUENCE    
  awcDot11TpFdbAddress MacAddress
  awcDot11TpFdbAID Gauge
  awcDot11TpFdbClientState AwcDot11ClientState
  awcDot11TpFdbTxShortRetries Counter
  awcDot11TpFdbTxLongRetries Counter
  awcDot11TpFdbLatestTxShortRetries Counter
  awcDot11TpFdbLatestTxLongRetries Counter
  awcDot11TpFdbRxWEPErrors Counter
  awcDot11TpFdbLatestRxSignalStrength Gauge
  awcDot11TpFdbLatestRxSignalQuality Gauge
  awcDot11TpFdbCapabilities Gauge
  awcDot11TpFdbListenInterval Gauge
  awcDot11TpFdbSupportedDataRates OCTET STRING
  awcDot11TpFdbPreferredTxRate Gauge
  awcDot11TpFdbCurrentBSS MacAddress
  awcDot11TpFdbSSID INTEGER
  awcDot11TpFdbVlanId AwcVlanId

AwcDot1dTpPortEntry  
SEQUENCE    
  awcDot1dTpPortDefaultUcastAllowedToGoTo OCTET STRING
  awcDot1dTpPortDefaultNUcastAllowedToGoTo OCTET STRING
  awcDot1dTpPortMaxNUcastPerSecond Gauge
  awcDot1dTpPortDefaultInEthertypeFilterId Gauge
  awcDot1dTpPortDefaultOutEthertypeFilterId Gauge
  awcDot1dTpPortDefaultInIpProtoFilterId Gauge
  awcDot1dTpPortDefaultOutIpProtoFilterId Gauge
  awcDot1dTpPortDefaultInIpPortFilterId Gauge
  awcDot1dTpPortDefaultOutIpPortFilterId Gauge

AwcTpFdbAlertEntry  
SEQUENCE    
  awcTpFdbAlertAddress MacAddress
  awcTpFdbFromAlertSrcPktsImmed Counter
  awcTpFdbFromAlertSrcOctetsImmed Counter
  awcTpFdbToAlertDestPktsImmed Counter
  awcTpFdbToAlertDestOctetsImmed Counter
  awcTpFdbAlertSentAlertTypePktsImmed Counter
  awcTpFdbAlertSentAlertTypeOctetsImmed Counter
  awcTpFdbAlertRcvdAlertTypePktsImmed Counter
  awcTpFdbAlertRcvdAlertTypeOctetsImmed Counter

AwcEventEntry  
SEQUENCE    
  awcEventID Gauge
  awcEventTime DisplayString
  awcEventSeverity AwcEventSeverity
  awcEventDescription DisplayString
  awcEventType DisplayString

AwcPolGrpEntry  
SEQUENCE    
  awcPolGrpId Gauge
  awcPolGrpName DisplayString
  awcPolGrpStatus RowStatus
  awcPolGrpInEthertypeFilterId Gauge
  awcPolGrpOutEthertypeFilterId Gauge
  awcPolGrpInIpProtoFilterId Gauge
  awcPolGrpOutIpProtoFilterId Gauge
  awcPolGrpInIpPortFilterId Gauge
  awcPolGrpOutIpPortFilterId Gauge

AwcDscpToCosMapEntry  
SEQUENCE    
  awcDscpToCosMapDscp INTEGER
  awcDscpToCosMapCos INTEGER

AwcAaaServerEntry  
SEQUENCE    
  awcAaaServerPriority INTEGER
  awcAaaServerProtocol INTEGER
  awcAaaServerName DisplayString
  awcAaaServerPort Gauge
  awcAaaServerTimeout Gauge
  awcAaaClientName DisplayString
  awcAaaServerSharedSecret DisplayString
  awcAaaServer8021xCapabilityEnabled TruthValue
  awcAaaServerMacAddrAuthEnabled TruthValue
  awcAaaServerAdminAuthEnabled TruthValue
  awcAaaServerMipAuthEnabled TruthValue
  awcAaaServerMaxRetransmission Gauge

AwcAcctServerEntry  
SEQUENCE    
  awcAcctServerPriority INTEGER
  awcAcctServerProtocol INTEGER
  awcAcctServerName DisplayString
  awcAcctServerPort Gauge
  awcAcctServerTimeout Gauge
  awcAcctServerUpdateEnable TruthValue
  awcAcctServerUpdateDelay Gauge
  awcAcctClientName DisplayString
  awcAcctSecureEnabled TruthValue
  awcAcctGeneralEnabled TruthValue
  awcAcctServerSharedSecret DisplayString
  awcAcctServerMaxRetransmission Gauge

AwcPrFltEthertypeSetEntry  
SEQUENCE    
  awcPfEtSetId Gauge
  awcPfEtSetName DisplayString
  awcPfEtDefaultDisposition AwcPfDisposition
  awcPfEtDefaultUcastTimeToLive Gauge
  awcPfEtDefaultNUcastTimeToLive Gauge
  awcPfEtSetStatus RowStatus

AwcPrFltEthertypeEntry  
SEQUENCE    
  awcPfEtEthertype INTEGER
  awcPfEtDisposition AwcPfDisposition
  awcPfEtUserPriority AwcPfPriority
  awcPfEtUcastTimeToLive Gauge
  awcPfEtNUcastTimeToLive Gauge
  awcPfEtAlert TruthValue
  awcPfEtStatus RowStatus

AwcPrFltIpProtocolSetEntry  
SEQUENCE    
  awcPfIppSetId Gauge
  awcPfIppSetName DisplayString
  awcPfIppDefaultDisposition AwcPfDisposition
  awcPfIppDefaultUcastTimeToLive Gauge
  awcPfIppDefaultNUcastTimeToLive Gauge
  awcPfIppSetStatus RowStatus

AwcPrFltIpProtocolEntry  
SEQUENCE    
  awcPfIppIpProtocol INTEGER
  awcPfIppDisposition AwcPfDisposition
  awcPfIppUserPriority AwcPfPriority
  awcPfIppUcastTimeToLive Gauge
  awcPfIppNUcastTimeToLive Gauge
  awcPfIppAlert TruthValue
  awcPfIppStatus RowStatus

AwcPrFltIpPortSetEntry  
SEQUENCE    
  awcPfIptSetId Gauge
  awcPfIptSetName DisplayString
  awcPfIptDefaultDisposition AwcPfDisposition
  awcPfIptDefaultUcastTimeToLive Gauge
  awcPfIptDefaultNUcastTimeToLive Gauge
  awcPfIptSetStatus RowStatus

AwcPrFltIpPortEntry  
SEQUENCE    
  awcPfIptIpPort INTEGER
  awcPfIptDisposition AwcPfDisposition
  awcPfIptUserPriority AwcPfPriority
  awcPfIptUcastTimeToLive Gauge
  awcPfIptNUcastTimeToLive Gauge
  awcPfIptAlert TruthValue
  awcPfIptStatus RowStatus

MipSAEntry  
SEQUENCE    
  mipSAIpStart IpAddress
  mipSAIpEnd IpAddress
  mipSAGroupSPI DisplayString
  mipSAGroupKey DisplayString
  mipSAStatus RowStatus

Defined Values

awcVx 1.3.6.1.4.1.522.3
OBJECT IDENTIFIER    

aironet 1.3.6.1.4.1.522
OBJECT IDENTIFIER    

awcSystem 1.3.6.1.4.1.522.3.1
OBJECT IDENTIFIER    

bootconfigVx 1.3.6.1.4.1.522.3.2
OBJECT IDENTIFIER    

awcSerialDev 1.3.6.1.4.1.522.3.3
OBJECT IDENTIFIER    

awcFtp 1.3.6.1.4.1.522.3.4
OBJECT IDENTIFIER    

awc802dot11 1.3.6.1.4.1.522.3.6
OBJECT IDENTIFIER    

awcUserMgr 1.3.6.1.4.1.522.3.7
OBJECT IDENTIFIER    

awcHttpd 1.3.6.1.4.1.522.3.8
OBJECT IDENTIFIER    

awcDnsRes 1.3.6.1.4.1.522.3.9
OBJECT IDENTIFIER    

awcSnmp 1.3.6.1.4.1.522.3.10
OBJECT IDENTIFIER    

awcSntp 1.3.6.1.4.1.522.3.11
OBJECT IDENTIFIER    

awcForwardTbl 1.3.6.1.4.1.522.3.12
OBJECT IDENTIFIER    

awcRipConfig 1.3.6.1.4.1.522.3.13
OBJECT IDENTIFIER    

awcEventLog 1.3.6.1.4.1.522.3.14
OBJECT IDENTIFIER    

awcEtherMIB 1.3.6.1.4.1.522.3.15
OBJECT IDENTIFIER    

awcPolicyGroups 1.3.6.1.4.1.522.3.16
OBJECT IDENTIFIER    

awcDdpIAPP 1.3.6.1.4.1.522.3.17
OBJECT IDENTIFIER    

awcHotStandby 1.3.6.1.4.1.522.3.18
OBJECT IDENTIFIER    

awcAaa 1.3.6.1.4.1.522.3.19
OBJECT IDENTIFIER    

awcAcctConfig 1.3.6.1.4.1.522.3.19.3
OBJECT IDENTIFIER    

awcProtocolFilters 1.3.6.1.4.1.522.3.20
OBJECT IDENTIFIER    

awcMobileIP 1.3.6.1.4.1.522.3.22
OBJECT IDENTIFIER    

awcDot11smt 1.3.6.1.4.1.522.3.6.1
OBJECT IDENTIFIER    

awcDot11mac 1.3.6.1.4.1.522.3.6.2
OBJECT IDENTIFIER    

awcDot11res 1.3.6.1.4.1.522.3.6.3
OBJECT IDENTIFIER    

awcDot11resAttribute 1.3.6.1.4.1.522.3.6.3.1
OBJECT IDENTIFIER    

awcDot11phy 1.3.6.1.4.1.522.3.6.4
OBJECT IDENTIFIER    

awcFtStatistics 1.3.6.1.4.1.522.3.12.1
OBJECT IDENTIFIER    

awcFtConfig 1.3.6.1.4.1.522.3.12.2
OBJECT IDENTIFIER    

awcEventStatistics 1.3.6.1.4.1.522.3.14.14
OBJECT IDENTIFIER    

awcEventDisposition 1.3.6.1.4.1.522.3.14.15
OBJECT IDENTIFIER    

awcAaaAuthConfig 1.3.6.1.4.1.522.3.19.4
OBJECT IDENTIFIER    

awcVxConformance 1.3.6.1.4.1.522.3.100
OBJECT IDENTIFIER    

awcVxCompliances 1.3.6.1.4.1.522.3.100.1
OBJECT IDENTIFIER    

awcVxGroups 1.3.6.1.4.1.522.3.100.2
OBJECT IDENTIFIER    

vxWorksVersion 1.3.6.1.4.1.522.3.1.1
The version of the underlying VxWorks operating system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

creationDate 1.3.6.1.4.1.522.3.1.2
The date and time the Access Point system code was initially compiled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcVxVersion 1.3.6.1.4.1.522.3.1.3
The version of the Access Point system code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

sysFlags 1.3.6.1.4.1.522.3.1.4
The VxWorks sysFlags system-configuration flags in use by the Access Point system. Not used by system code with awcVxVersion from 10.00 to 11.06.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

languageCode 1.3.6.1.4.1.522.3.1.5
The language currently in use by the system. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcDevID 1.3.6.1.4.1.522.3.1.6
The Aironet DDP protocol device ID of the system when using the full capabilities with which the system is licensed. Note that a system may be configured to use fewer capabilities that those for which it is licensed. For example, a Bridge may be configured for use as an Access Point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDevIDtxt 1.3.6.1.4.1.522.3.1.7
Textual representation of awcDevID. Max. string length is 128 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

enableHTTP 1.3.6.1.4.1.522.3.1.8
If true, the Access Point's HTTP server can accept connections from other network devices. If false, the Access Point's HTTP server will only accept connections from the Access Point's console or indirectly over TELNET.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableTelnet 1.3.6.1.4.1.522.3.1.9
If true, the Access Point's TELNET server can accept connections from other network devices. If false, all TELNET connections will be refused.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableSNMP 1.3.6.1.4.1.522.3.1.10
If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableDnsResolver 1.3.6.1.4.1.522.3.1.11
If true, the Access Point will attempt to resolve IP address references through all configured DNS servers and will attempt to perform reverse-lookup via all configured DNS servers when displaying IP addresses. If false, the Access Point will interpret and display only explicit numeric IP addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableSNTP 1.3.6.1.4.1.522.3.1.13
If true, the Access Point will attempt to periodically update its wall-clock time via a configured SNTP server. If false, the Access Point wall-clock time must be manually adjusted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableWDB 1.3.6.1.4.1.522.3.1.14
If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

pingTxLen 1.3.6.1.4.1.522.3.1.15
The size in octets of ping packets transmitted by the Access Point. Default 64.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 12..4096  

awcFirstBoot 1.3.6.1.4.1.522.3.1.16
If true, no user-specified configuration has been saved by the Access Point since either the system left Cisco manufacturing or since the user performed a Reset All System Factory Defaults operation. If false, a change in configuration has been saved by the user. Note that configurations specified solely via boot protocols such as DHCP or BOOTP are not considered user-specified for purposes of changing awcFirstBoot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcOemOUI 1.3.6.1.4.1.522.3.1.17
The IEEE Organizationally Unique Identifier of the reseller for which this system is branded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcOemName 1.3.6.1.4.1.522.3.1.18
The full name of the reseller for which this system is branded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcOemNameShort 1.3.6.1.4.1.522.3.1.19
An abbreviated name of the reseller for which this system is branded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcOemHomeURL 1.3.6.1.4.1.522.3.1.20
The URL of the corporate HTML home page of the reseller for which this system is branded.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

enablePSPF 1.3.6.1.4.1.522.3.1.21
If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

sysExceptionReboot 1.3.6.1.4.1.522.3.1.24
If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

bootblockVersion 1.3.6.1.4.1.522.3.1.25
The version of the Access Point boot block (bootstrap loader) code.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

motherboardRevision 1.3.6.1.4.1.522.3.1.26
Revision number of the Access Point system motherboard.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

enableSTP 1.3.6.1.4.1.522.3.1.27
If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

enableRebootKey 1.3.6.1.4.1.522.3.1.28
If true, the VxWorks Monitor Trap keystroke is enabled from the console and from Telnet. By default, this is . Entering this character initiates a warm-restart of the system. If false, the VxWorks Monitor Trap keystroke is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcLocateUnit 1.3.6.1.4.1.522.3.1.29
If true, the unit will immediately begin flashing all three of its Status LEDs with an alternating pattern of amber and off. If false, the Status LEDs operate in their normal fashion.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

bootconfigBootProtocol 1.3.6.1.4.1.522.3.2.1
The protocol to be used for automatic configuration at the time of system bootstrap/reboot. Options BOOTP, DHCP, or none.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), bootp(2), dhcp(3)  

bootconfigReadINI 1.3.6.1.4.1.522.3.2.2
If always, the system will attempt to read a .ini-formatted configuration file upon every reboot. If never, the system will not attempt to read a .ini file upon reboot, even if a boot protocol is in use and the boot server specifies a file to be read. If ifSpecified, the system will attempt to read a .ini file upon reboot if and only if a boot protocol is in use and the boot server explicitly specifies a file to be read. The system attempts several filenames in the process of retrieving a .ini file without error. In order, these filenames are based on the system's BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the system's IP address, then, as a last resort, the BOOTP- or DHCP-assigned boot file name. For each filename, the system attempts to read first from the designated defaultFileServer, then, if not successful, from one of either the BOOTP/DHCP server itself or bootconfigFileServerAddr (if specified by the BOOTP/DHCP server).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER always(1), never(2), ifSpecified(3)  

bootconfigServerConfigTimeout 1.3.6.1.4.1.522.3.2.3
The time in seconds which the system should wait for a configuration response from a BOOTP server before falling back to the stored configuration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

bootconfigMultOfferTimeout 1.3.6.1.4.1.522.3.2.4
The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

bootconfigReqLeaseDuration 1.3.6.1.4.1.522.3.2.5
The requested DHCP lease duration, in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

bootconfigMinLeaseDuration 1.3.6.1.4.1.522.3.2.6
The minimum acceptable DHCP lease duration, in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

bootconfigDev 1.3.6.1.4.1.522.3.2.7
Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigClientAddr 1.3.6.1.4.1.522.3.2.8
IPv4 network address of this device, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigHostAddr 1.3.6.1.4.1.522.3.2.9
IPv4 network address of the BOOTP or DHCP server from which the configuration of this device was leased.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigBootFile 1.3.6.1.4.1.522.3.2.10
Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device. This is considered a default configuration file because many DHCP servers are not capable of distinguishing boot files between different clients.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigSubnetMask 1.3.6.1.4.1.522.3.2.11
IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigGateway 1.3.6.1.4.1.522.3.2.12
IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigHostName 1.3.6.1.4.1.522.3.2.13
Textual name of the BOOTP or DHCP server from which the configuration of this device was leased. This should be a DNS-recognizable host name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigClientName 1.3.6.1.4.1.522.3.2.14
Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigNameServerTable 1.3.6.1.4.1.522.3.2.15
Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    BootconfigNameServerEntry

bootconfigNameServerEntry 1.3.6.1.4.1.522.3.2.15.1
An entry in bootconfigNameServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  BootconfigNameServerEntry  

bootconfigNameServerPriority 1.3.6.1.4.1.522.3.2.15.1.1
The priority order in which a domain name server is queried. Lower values are queried first.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

bootconfigNameServer 1.3.6.1.4.1.522.3.2.15.1.2
The IPv4 address of a domain name server.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigDomainName 1.3.6.1.4.1.522.3.2.16
Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigSntpServer 1.3.6.1.4.1.522.3.2.17
IPv4 network address of SNTP server for use by this device, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigSaveServerResponse 1.3.6.1.4.1.522.3.2.18
If true, the leased configuration from a boot server is saved as the new system defaults. If false, system defaults remain unchanged when a new configuration is leased.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

bootconfigCmdInvokeIniLoad 1.3.6.1.4.1.522.3.2.19
Initiate loading of an initialization script '.ini' file from the file server into the system FLASH. Commands recognized: start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcInvokeCommand  

bootconfigCmdStatusIniLoad 1.3.6.1.4.1.522.3.2.20
Status of the most recent command to load an initialization script '.ini' file. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = The '.ini' file was not found on the file server. 12 = Insufficient memory to load the '.ini' file. 22 = Invalid '.ini' file format. 35 = File format of the '.ini' file is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

bootconfigDhcpClassID 1.3.6.1.4.1.522.3.2.24
Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

bootconfigFileServerAddr 1.3.6.1.4.1.522.3.2.25
IPv4 network address of the file server from which to read configuration files, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigLogServerAddr 1.3.6.1.4.1.522.3.2.26
IPv4 network address of the host to receive SYSLOG messages, as determined by the BOOTP or DHCP protocol.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

bootconfigBootCount 1.3.6.1.4.1.522.3.2.27
The number of times the system code has been restarted since the system left Cisco manufacturing.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

bootconfigDhcpClientIdType 1.3.6.1.4.1.522.3.2.28
The ARP hardware type, per RFC 1700, of bootconfigDhcpClientIdValue. If it is not a hardware address (e.g. is a fully-qualified domain name), a value of 0 will be used for the DHCP Client Identifier 'htype' field.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER ethernet10Mb(1), experimentalEthernet3Mb(2), amateurRadioAxDot25(3), proteonProNetTokenRing(4), chaos(5), ieee802Networks(6), arcnet(7), hyperchannel(8), lanstar(9), autonet(10), localTalk(11), localNet(12), nonHardware(128)  

bootconfigDhcpClientIdValue 1.3.6.1.4.1.522.3.2.29
Specification of the DHCP unique client Identifier presented by the system when requesting DHCP leases.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcSerialConfigTable 1.3.6.1.4.1.522.3.3.1
SerialConfigTable attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcSerialConfigEntry

awcSerialConfigEntry 1.3.6.1.4.1.522.3.3.1.1
An entry in the awcSerialConfigEntry table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcSerialConfigEntry  

serialDevIndex 1.3.6.1.4.1.522.3.3.1.1.1
The index used to access rows in the awcSerialConfig table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

serialAdminStatus 1.3.6.1.4.1.522.3.3.1.1.2
The requested status of the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), error(4)  

serialOperStatus 1.3.6.1.4.1.522.3.3.1.1.3
The actual status of the serial port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2), testing(3), error(4)  

serialBaud 1.3.6.1.4.1.522.3.3.1.1.4
The baud rate of the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

serialParity 1.3.6.1.4.1.522.3.3.1.1.5
The parity of the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), even(2), odd(3), one(4), zero(5)  

serialDataBits 1.3.6.1.4.1.522.3.3.1.1.6
The number of data bits per character recognized by the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 7..8  

serialStopBits 1.3.6.1.4.1.522.3.3.1.1.7
The number of stop bits of the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 1..2  

serialFlowControl 1.3.6.1.4.1.522.3.3.1.1.8
The flow control method used by the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER none(1), swXonXoff(2), hwRtsCts(3), swHwBoth(4)  

serialTerminalType 1.3.6.1.4.1.522.3.3.1.1.9
The terminal type of the serial port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER teletype(1), ansi(2)  

serialTerminalLines 1.3.6.1.4.1.522.3.3.1.1.10
The number of horizontal lines available on each terminal page. Default 24.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 16..50  

serialTerminalColumns 1.3.6.1.4.1.522.3.3.1.1.11
The number of vertical columns available on each terminal page. Default 80.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 64..132  

serialDevFd 1.3.6.1.4.1.522.3.3.1.1.12
The VxWorks I/O File Descriptor used to access the serial device.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

defaultFileServer 1.3.6.1.4.1.522.3.4.1
The name of the preferred file server to be used for all FTP and TFTP Put and Get operations. Max. name length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferProtocol 1.3.6.1.4.1.522.3.4.2
The protocol to be used by the system for file transfer (TFTP or FTP).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tftp(1), ftp(2)  

awcFileXferUser 1.3.6.1.4.1.522.3.4.3
The name of the user, as required by all FTP file transfers. Max. name length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferPassword 1.3.6.1.4.1.522.3.4.4
The password of the user, as required by all FTP file transfers. Max. password length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferCmdInvokeFileLoad 1.3.6.1.4.1.522.3.4.5
Initiate loading of all specified files from the file server into the system FLASH. Commands recognized: start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcInvokeCommand  

awcFileXferCmdStatusFileLoad 1.3.6.1.4.1.522.3.4.6
Status of the most recent command to load the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = At least one file was not found on the file server. 12 = Insufficient memory to load all files. 22 = No file specified, or invalid file format. 35 = File format of at least one of the files is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFileXferCmdInvokeFileSave 1.3.6.1.4.1.522.3.4.7
Initiate saving of all specified fileXferFile* files to the file server from the system FLASH. Commands recognized: start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcInvokeCommand  

awcFileXferCmdStatusFileSave 1.3.6.1.4.1.522.3.4.8
Status of the most recent command to save the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 1 = Insufficient permission to save the files. 2 = A directory specified for saving at least one of the files was not found. 22 = No file specified, or invalid file format. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFileXferFileFirmwareSystem 1.3.6.1.4.1.522.3.4.9
The filename of the system firmware image. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferFileFirmwareRadio0 1.3.6.1.4.1.522.3.4.10
The filename of the radio firmware image. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferFileWebUI 1.3.6.1.4.1.522.3.4.11
The filename of the system Web pages image. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferFileFpgaPcmcia 1.3.6.1.4.1.522.3.4.12
The filename of the FPGA image for the PCMCIA controller. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferTftpPort 1.3.6.1.4.1.522.3.4.13
IP port number over which to perform TFTP operations. Default 69.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

awcFileXferFtpDirectory 1.3.6.1.4.1.522.3.4.14
Directory on defaultFileServer in which files are located.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferFilesFLASH 1.3.6.1.4.1.522.3.4.17
The filename of a complete FLASH firmware image for the system, including all non-configuration files within the system FLASH file system. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFileXferFileFirmwareRadio1 1.3.6.1.4.1.522.3.4.18
The filename of the radio firmware image. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcIfTable 1.3.6.1.4.1.522.3.5
IfTable attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcIfEntry

awcIfEntry 1.3.6.1.4.1.522.3.5.1
An entry in the awcIfEntry table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcIfEntry  

awcIfDefaultPhysAddress 1.3.6.1.4.1.522.3.5.1.1
The default, factory-assigned MAC address of the interface. Guaranteed to be unique across all IEEE 802 devices.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcIfPhysAddress 1.3.6.1.4.1.522.3.5.1.2
The MAC address to be used by the interface. If awcIfDefaultPhysAddress is to be used, this is 00:00:00:00:00:00.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

awcIfAdoptPrimaryIdentity 1.3.6.1.4.1.522.3.5.1.3
If true, this interface adopts the identity of bootconfigDev, the primary interface. This includes MAC address, IP address, etc. This is the conventional mode of operation when operating as a transparent bridge. If false, this interface always has a unique MAC address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcIfDefaultIpAddress 1.3.6.1.4.1.522.3.5.1.4
The default IPv4 Address of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

awcIfDefaultIpNetMask 1.3.6.1.4.1.522.3.5.1.5
The default IPv4 netmask of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

awcIfIpAddress 1.3.6.1.4.1.522.3.5.1.6
The IPv4 Address currently in use by the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

awcIfIpNetMask 1.3.6.1.4.1.522.3.5.1.7
The IPv4 netmask currently in use by the interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

awcIfMSDUMaxLength 1.3.6.1.4.1.522.3.5.1.8
Maximum length of the data portion of a packet for this particular interface. This is the maximum MAC Service Data Unit length, which is greater than or equal to ifMtu, depending on the configured MAC-level encapsulation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcIfOutDiscardsCoS0 1.3.6.1.4.1.522.3.5.1.9
The number of outbound packets of CoS 0 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS1 1.3.6.1.4.1.522.3.5.1.10
The number of outbound packets of CoS 1 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS2 1.3.6.1.4.1.522.3.5.1.11
The number of outbound packets of CoS 2 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS3 1.3.6.1.4.1.522.3.5.1.12
The number of outbound packets of CoS 3 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS4 1.3.6.1.4.1.522.3.5.1.13
The number of outbound packets of CoS 4 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS5 1.3.6.1.4.1.522.3.5.1.14
The number of outbound packets of CoS 5 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS6 1.3.6.1.4.1.522.3.5.1.15
The number of outbound packets of CoS 6 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcIfOutDiscardsCoS7 1.3.6.1.4.1.522.3.5.1.16
The number of outbound packets of CoS 7 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11StationConfigTable 1.3.6.1.4.1.522.3.6.1.1
Station Config Table attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11StationConfigEntry

awcDot11StationConfigEntry 1.3.6.1.4.1.522.3.6.1.1.1
An entry in the awcDot11StationConfigTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11StationConfigEntry  

awcDot11StationRole 1.3.6.1.4.1.522.3.6.1.1.1.1
The role of this station itself within the 802.11 BSS (radio cell) of which it is a member.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER roleClient(1), roleIBSS(2), roleRepeater(3), roleAP(4)  

awcDot11PowerManagementSubMode 1.3.6.1.4.1.522.3.6.1.1.1.2
When configured as roleClient, the Power Management Submode of the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot11UseAWCExtensions 1.3.6.1.4.1.522.3.6.1.1.1.3
If true, Aironet extensions to the basic 802.11 protocol are enabled. This results in better BSS performance and faster roaming. If false, only the basic 802.11 protocols are used. This ensures maximum compatibility with non-Aironet equipment.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AllowAssocBroadcastSSID 1.3.6.1.4.1.522.3.6.1.1.1.4
If true and awcDot11StationRole is either roleAP or roleRepeater, the radio will respond to Broadcast SSID Probe Requests and will broadcast its own SSID within its Beacons. If false, the radio will not respond to the Broadcast SSID and will not broadcast its SSID within Beacons.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11PrivacyOptionImplementedMaxRate 1.3.6.1.4.1.522.3.6.1.1.1.5
The maximum Transmit bit rate supported by the radio when using WEP encryption. Expressed in standard 802.11 increments of 500Kb/sec.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..127  

awcDot11DesiredBSSLength 1.3.6.1.4.1.522.3.6.1.1.1.6
The number of entries in awcDot11DesiredBSSTable.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcDot11EnetEncapsulationDefault 1.3.6.1.4.1.522.3.6.1.1.1.7
The Ethernet Encapsulation Transform type used within the BSS. Either IEEE 802.1H or RFC 1042 can be utilized. IEEE 802.1H provides exceptions for the Novel IPX and AARP protocols.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER encap802dot1H(1), encapRfc1042(2)  

awcDot11ForceReqFirmwareVersion 1.3.6.1.4.1.522.3.6.1.1.1.8
If true, the radio driver will only allow operation with the specific radio firmware revision with which it was originally tested. If false, the radio driver will allow operation with the radio firmware revision with which it was tested, or any later radio firmware revision.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11BridgeSpacing 1.3.6.1.4.1.522.3.6.1.1.1.9
If this device is the root side of a Bridge configuration, this value is the distance in kilometers reported between this device and its farthest non-root Bridge.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot11DesiredSSIDMaxAssociatedSTA 1.3.6.1.4.1.522.3.6.1.1.1.10
The maximum number of 802.11 Stations which may Associate with this access point through either the Broadcast SSID or through dot11DesiredSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11DesiredSSIDNumAssociatedSTA 1.3.6.1.4.1.522.3.6.1.1.1.11
The current number of 802.11 Stations which are Associated with this access point through either the Broadcast SSID or through dot11DesiredSSID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11AuxiliarySSIDLength 1.3.6.1.4.1.522.3.6.1.1.1.12
The maximum number of entries in awcDot11AuxiliarySSIDTable. If awcDot11MultipleSSIDPerBSSImplemented is FALSE, awcDot11AuxiliarySSIDLength must be 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11MultipleSSIDPerBSSImplemented 1.3.6.1.4.1.522.3.6.1.1.1.13
This attribute, when TRUE, indicates that the station implementation is capable of responding to 802.11 Probe Requests for SSIDs other than dot11DesiredSSID. The default value of this attribute is FALSE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

awcDot11SymbolExtensionsImplemented 1.3.6.1.4.1.522.3.6.1.1.1.14
This attribute, when TRUE, indicates that the station implementation is capable of generating Symbol, Inc. proprietary elements in its Beacons and Probe Responses. These elements enable support for Symbol Voice-over-IP (VoIP) phones. The default value of this attribute is FALSE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

awcDot11SymbolExtensionsEnabled 1.3.6.1.4.1.522.3.6.1.1.1.15
Should the Radio generate Symbol, Inc. proprietary elements in its Beacons and Probe Responses in support of Symbol VoIP phones?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11DesiredSSIDMicAlgorithm 1.3.6.1.4.1.522.3.6.1.1.1.16
Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcDot11MicAlgorithm  

awcDot11DesiredSSIDWEPKeyPermuteAlgorithm 1.3.6.1.4.1.522.3.6.1.1.1.17
Function through which the WEP encryption key is permuted between key renewal periods for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcDot11WEPKeyPermuteAlgorithm  

awcDot11DesiredSSIDInfrastructureWGB 1.3.6.1.4.1.522.3.6.1.1.1.18
When true, Workgroup Bridge-class devices Associated to this access point through either the Broadcast SSID or dot11DesiredSSID are provided the class of service which is provided to network infrastructure stations by their parent access point. This includes use of the 802.11 reliable multicast protocol (4-address packets for multicast). When false, Workgroup Bridge-class devices are provided the class of service which is provided to ordinary client stations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11DesiredSSIDDefaultPolId 1.3.6.1.4.1.522.3.6.1.1.1.19
Default Policy Group Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that no special policies are to be applied by default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPolId  

awcDot11DesiredSSIDDefaultVlanId 1.3.6.1.4.1.522.3.6.1.1.1.20
Default VLAN Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcVlanId  

awcDot11DesiredSSIDEnableProxyMobileIP 1.3.6.1.4.1.522.3.6.1.1.1.21
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11InfrastructureSSID 1.3.6.1.4.1.522.3.6.1.1.1.22
Index of the SSID which all 802.11 infrastructure stations shall use for Association. If 0, an access point and its repeaters and other subordinate infrastructure devices will Associate through dot11DesiredSSID. If non-0, an access point and its subordinate infrastructure devices will Associate through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11InfrastructureSSID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11QBSSElementImplemented 1.3.6.1.4.1.522.3.6.1.1.1.23
This attribute, when TRUE, indicates that the station implementation is capable of generating 802.11e QBSS elements in its Beacons and Probe Responses. These elements enable support for basic 802.11 Quality of Service. The default value of this attribute is FALSE.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

awcDot11QBSSElementEnabled 1.3.6.1.4.1.522.3.6.1.1.1.24
Should the Radio generate 802.11e QBSS elements in its Beacons and Probe Responses in support of 802.11 Quality of Service?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11InfrastructureSSIDExclusive 1.3.6.1.4.1.522.3.6.1.1.1.25
Should this access point restrict all infrastructure stations to associate only through the SSID specified by awcDot11InfrastructureSSID?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11SendIGMPGeneralQuery 1.3.6.1.4.1.522.3.6.1.1.1.26
Should this access point issue an IGMP General Query to all associated stations when they complete all required high-level authentication? Such an IGMP query can help configure multicast groups efficiently.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11NonRootMobility 1.3.6.1.4.1.522.3.6.1.1.1.27
This object is used to determine if the radio should look for a better parent AP in heavy traffic condition when the awcDot11StationRole is roleClient(1) or roleRepeater(3). It will look for better parent if it is mobile(1) and will not look for better parent if it is stationary(2).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER mobile(1), stationary(2)  

awcDot11AuthenticationAlgorithmsTable 1.3.6.1.4.1.522.3.6.1.2
This table contains attributes to configure authentication algorithm parameters for associations through the SSID defined by IEEE802dot11-MIB dot11DesiredSSID object. It defines attributes additional to those defined in the IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable. An interface may support multiple authentication algorithms. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). This table uses the dot11AuthenticationAlgorithmsIndex of the dot11AuthenticationAlgorithmsTable defined in the IEEE802dot11-MIB as the expansion index. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11AuthenticationAlgorithmsEntry

awcDot11AuthenticationAlgorithmsEntry 1.3.6.1.4.1.522.3.6.1.2.1
Each entry specifies Cisco Aironet product specific authentication algorithm configuration attributes of the dot11DesiredSSID on a radio interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11AuthenticationAlgorithmsEntry  

awcDot11AuthenticationAlgorithmsIndex 1.3.6.1.4.1.522.3.6.1.2.1.1
The auxiliary variable used to identify instances of the columnar objects in the Aironet Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65536  

awcDot11AuthenticationRequireEAP 1.3.6.1.4.1.522.3.6.1.2.1.2
If true, stations authenticating with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AuthenticationDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.6.1.2.1.3
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

awcDot11WEPDefaultKeysTable 1.3.6.1.4.1.522.3.6.1.3
Extension of dot11WEPDefaultKeysTable to allow for key lengths other than 40 bits.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11WEPDefaultKeysEntry

awcDot11WEPDefaultKeysEntry 1.3.6.1.4.1.522.3.6.1.3.1
An entry in the awcDot11WEPDefaultKeysTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11WEPDefaultKeysEntry  

awcDot11WEPDefaultKeyIndex 1.3.6.1.4.1.522.3.6.1.3.1.1
The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

awcDot11WEPDefaultKeyLen 1.3.6.1.4.1.522.3.6.1.3.1.2
Length in octets of awcDot11WEPDefaultKeyValue. If 0, the corresponding awcDot11WEPDefaultKeyValue is not configured.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..13  

awcDot11WEPDefaultKeyValue 1.3.6.1.4.1.522.3.6.1.3.1.3
A WEP default secret key value. The value is write-only (attempt to read will result in return of a zero-length string).
Status: mandatory Access: read-write
OBJECT-TYPE    
  WEPKeytype128  

awcDot11PrivacyTable 1.3.6.1.4.1.522.3.6.1.5
Additional information about the WEP capabilities of the device. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11PrivacyEntry

awcDot11PrivacyEntry 1.3.6.1.4.1.522.3.6.1.5.1
An entry in the awcDot11PrivacyTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11PrivacyEntry  

awcDot11WEPDefaultKeyMaxIndex 1.3.6.1.4.1.522.3.6.1.5.1.1
The maximum WEP Default Key index which the radio supports. Range 1..4, or 0 if the radio does not support WEP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcDot11AllowEncrypted 1.3.6.1.4.1.522.3.6.1.5.1.2
When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as the dot11ExcludeUnencrypted attribute is false. The default value of this attribute shall be false.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11WEPKeyMaxLen 1.3.6.1.4.1.522.3.6.1.5.1.3
The maximum WEP Key Length which the radio supports. Range 0..16, or 0 if the radio does not support WEP. Note that, even if the radio supports more than 13 octets of key value, the current 802.11 standard only makes use of the first 13 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..16  

awcDot11LEAPUserName 1.3.6.1.4.1.522.3.6.1.5.1.4
User Name assigned to the system for use when authenticating with AAA servers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

awcDot11LEAPPassword 1.3.6.1.4.1.522.3.6.1.5.1.5
User Password (shared secret) assigned to the system for use when authenticating with AAA servers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

awcDot11DesiredBSSTable 1.3.6.1.4.1.522.3.6.1.6
When the radio is not in roleAP, a list of preferred Access Points with which the radio should Associate. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11DesiredBSSEntry

awcDot11DesiredBSSEntry 1.3.6.1.4.1.522.3.6.1.6.1
An entry in the awcDot11DesiredBSSTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11DesiredBSSEntry  

awcDot11DesiredBSSIndex 1.3.6.1.4.1.522.3.6.1.6.1.1
The priority order in which Preferred Access Points should be probed. Lower indices are probed first.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

awcDot11DesiredBSS 1.3.6.1.4.1.522.3.6.1.6.1.2
The BSS identifier (MAC address) of the Access Point with which the radio should try to Associate, or 00:00:00:00:00:00 if the BSS identifier for this priority is unspecified.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

awcDot11AuxiliarySSIDTable 1.3.6.1.4.1.522.3.6.1.7
When the radio is not in roleClient, a list of Stations which, when Associated to this system, shall always have the same AID.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11AuxiliarySSIDEntry

awcDot11AuxiliarySSIDEntry 1.3.6.1.4.1.522.3.6.1.7.1
An entry in the awcDot11AuxiliarySSIDTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11AuxiliarySSIDEntry  

awcDot11AuxSSIDIndex 1.3.6.1.4.1.522.3.6.1.7.1.1
Identifier of auxiliary SSIDs supported by the access point in addition to dot11DesiredSSID. Domain from 1 to awcDot11AuxiliarySSIDLength.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2007  

awcDot11AuxSSID 1.3.6.1.4.1.522.3.6.1.7.1.2
This attribute reflects a Service Set ID recognized by the access point. The access point shall respond to Probe Requests specifying this SSID, but does not advertise this SSID in its Beacons.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

awcDot11AuxSSIDMaxAssociatedSTA 1.3.6.1.4.1.522.3.6.1.7.1.3
The maximum number of 802.11 Stations which may Associate with this access point through awcDot11AuxSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11AuxSSIDNumAssociatedSTA 1.3.6.1.4.1.522.3.6.1.7.1.4
The current number of 802.11 Stations which are Associated with this access point through awcDot11AuxSSID.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2007  

awcDot11AuxSSIDDefaultPolId 1.3.6.1.4.1.522.3.6.1.7.1.6
Default Policy Group Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that no special policies are to be applied by default.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPolId  

awcDot11AuxSSIDDefaultVlanId 1.3.6.1.4.1.522.3.6.1.7.1.7
Default VLAN Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcVlanId  

awcDot11AuxSSIDEnableProxyMobileIP 1.3.6.1.4.1.522.3.6.1.7.1.8
If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point over awcDot11AuxSSID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AuxSSIDAuthAlgTable 1.3.6.1.4.1.522.3.6.1.8
This (conceptual) table of attributes shall be a set of all the Aironet-specific parameters for each authentication algorithm supported by the station for each auxiliary SSID listed in awcDot11AuxiliarySSIDTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11AuxSSIDAuthAlgEntry

awcDot11AuxSSIDAuthAlgEntry 1.3.6.1.4.1.522.3.6.1.8.1
An Entry (conceptual row) in the Aironet Auxiliary SSID Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11AuxSSIDAuthAlgEntry  

awcDot11AuxSSIDAuthAlgIndex 1.3.6.1.4.1.522.3.6.1.8.1.1
The auxiliary variable used to identify instances of the columnar objects in the Aironet Auxiliary SSID Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65536  

awcDot11AuxSSIDAuthAlgEnable 1.3.6.1.4.1.522.3.6.1.8.1.2
If true, stations may authenticate to the SSID specified by awcDot11AuxSSIDIndex with the algorithm corresponding to dot11AuthenticationAlgorithmsIndex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AuxSSIDAuthAlgRequireEAP 1.3.6.1.4.1.522.3.6.1.8.1.3
If true, stations authenticating to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.6.1.8.1.4
The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

awcDot11AssignedAIDTable 1.3.6.1.4.1.522.3.6.1.9
When the radio is not functioning as a client station (i.e., awcDot11StationRole is not 'roleClient'), this is the list of AIDs which this agent will assign to the clients associating with it. An AID is assigned if the corresponding MAC address matches that of the client. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11AssignedAIDEntry

awcDot11AssignedAIDEntry 1.3.6.1.4.1.522.3.6.1.9.1
An entry in the awcDot11AssignedAIDTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11AssignedAIDEntry  

awcDot11AssignedAID 1.3.6.1.4.1.522.3.6.1.9.1.1
An AID which shall be reserved for the exclusive use of a single Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..2007  

awcDot11AssignedSTA 1.3.6.1.4.1.522.3.6.1.9.1.2
The Station (MAC address) which, when Associated to this system, shall always be assigned awcDot11AssignedAID as its 802.11 AID.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

awcDot11AccessPointCountersTable 1.3.6.1.4.1.522.3.6.1.10
This table includes radio statistics collected by the IEEE 802.11 radio interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11AccessPointCountersEntry

awcDot11AccessPointCountersEntry 1.3.6.1.4.1.522.3.6.1.10.1
Each entry contains counters of frame transmissions and client associations for a radio interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11AccessPointCountersEntry  

awcDot11AssociatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.1
Total number of successful 802.11 Association Request operations to this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11AuthenticatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.2
Total number of successful 802.11 MAC-level Authentication operations to this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11ReassociatedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.3
Total number of successful 802.11 Reassociation Request operations to this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11RoamedStationCount 1.3.6.1.4.1.522.3.6.1.10.1.4
Total number of times that clients which had successfully (re)associated with this access point successfully reassociated with another access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DeauthenticateCount 1.3.6.1.4.1.522.3.6.1.10.1.5
Total number of Deauthenticate frames sent over this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DisassociateCount 1.3.6.1.4.1.522.3.6.1.10.1.6
Total number of Disassociate frames sent over this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11EncapPktsMMH 1.3.6.1.4.1.522.3.6.1.10.1.7
Total number of packets for which the a MIC has been requested to be calculated with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DecapPktsMMH 1.3.6.1.4.1.522.3.6.1.10.1.8
Total number of packets received over this radio of this access point since system startup and for which a MIC has been requested to be validated with the MMH algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11EncapErrorsMMH 1.3.6.1.4.1.522.3.6.1.10.1.9
Total number of packets which have failed MIC calculation with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DecapErrorsMMH 1.3.6.1.4.1.522.3.6.1.10.1.10
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DecapExistsMMH 1.3.6.1.4.1.522.3.6.1.10.1.11
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to sequence number and duplicate packet errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11DecapAccessMMH 1.3.6.1.4.1.522.3.6.1.10.1.12
Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to cryptographic key-mismatch errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11CountersTable 1.3.6.1.4.1.522.3.6.2.2
This table contains MAC statistics on each of IEEE 802.11 interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11CountersEntry

awcDot11CountersEntry 1.3.6.1.4.1.522.3.6.2.2.1
Each entry contains counters of frame transmissions for a radio interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11CountersEntry  

awcDot11TxDeferEnergyCount 1.3.6.1.4.1.522.3.6.2.2.1.1
Total number of frames deferred transmission due to energy detect since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11RxMacCrcErrorCount 1.3.6.1.4.1.522.3.6.2.2.1.2
Total number of frames received with MAC CRC errors since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11SsidMismatchCount 1.3.6.1.4.1.522.3.6.2.2.1.3
Total number of Beacon or Probe Response frames received for which the SSID does not match dot11DesiredSSID since system startup.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11QoSTable 1.3.6.1.4.1.522.3.6.2.4
This (conceptual) table of attributes shall be a set of parameters for each traffic category (i.e. 802.1D priority) of packet passed over the radio.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11QoSEntry

awcDot11QoSEntry 1.3.6.1.4.1.522.3.6.2.4.1
An Entry (conceptual row) in the Aironet Quality of Service Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11QoSEntry  

awcDot11QoSCoS 1.3.6.1.4.1.522.3.6.2.4.1.1
The auxiliary variable used to identify instances of the columnar objects in the Aironet Quality of Service Table. This variable corresponds directly to the 802.1D traffic category ID, plus 1.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..8  

awcDot11QoSCWmin 1.3.6.1.4.1.522.3.6.2.4.1.2
802.11 CWmin of the traffic category. The value of this OID must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be less than or equal to awcDot11QoSCWmax.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1023  

awcDot11QoSCWmax 1.3.6.1.4.1.522.3.6.2.4.1.3
802.11 CWmax of the traffic category. The value of this OID must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be greater than or equal to awcDot11QoSCWmin.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1023  

awcDot11ResourceInfoTable 1.3.6.1.4.1.522.3.6.3.1.2
Resource Info Table attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11ResourceInfoEntry

awcDot11ResourceInfoEntry 1.3.6.1.4.1.522.3.6.3.1.2.1
An entry in the awcDot11ResourceInfoTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11ResourceInfoEntry  

awcDot11FirmwareBootstrapVersion 1.3.6.1.4.1.522.3.6.3.1.2.1.1
The firmware version of the radio boot block. Max. string length is 128 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcDot11PhyOperationTable 1.3.6.1.4.1.522.3.6.4.1
awcDot11PhyOperationTable attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11PhyOperationEntry

awcDot11PhyOperationEntry 1.3.6.1.4.1.522.3.6.4.1.1
An entry in the awcDot11PhyOperationTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11PhyOperationEntry  

awcDot11CurrentCarrierSet 1.3.6.1.4.1.522.3.6.4.1.1.1
The carrier set of the device. The Carrier Set implies a Regulatory Domain, but geographic-specific restrictions within a Regulatory Domain may necessitate several Carrier Sets within the Regulatory Domain.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER usa(0), europe(1), japan(2), spain(3), france(4), belgium(5), israel(6), canada(7), australia(8), japanWide(9), usa5GHz(11), europe5GHz(12), japan5GHz(13), singapore5GHz(14), taiwan5GHz(15), china(16)  

awcDot11ModulationType 1.3.6.1.4.1.522.3.6.4.1.1.2
The RF modulation of the radio.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER standard(1), mok(2)  

awcDot11PreambleType 1.3.6.1.4.1.522.3.6.4.1.1.3
The current radio preamble type in use by the Station. Possible values: 1 = Use long preambles whenever possible. 2 = Use only short preambles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER long(1), short(2)  

awcDot11PHYType 1.3.6.1.4.1.522.3.6.4.1.1.5
This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, DSSS 5.0 GHz = 11
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER fhss(1), dsss(2), irbaseband(3), dsssDot11A(11)  

awcDot11PhyFHSSTable 1.3.6.1.4.1.522.3.6.4.4
awcDot11PhyFHSSTable attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11PhyFHSSEntry

awcDot11PhyFHSSEntry 1.3.6.1.4.1.522.3.6.4.4.1
An entry in the awcDot11PhyFHSSTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11PhyFHSSEntry  

awcDot11Compatible3100 1.3.6.1.4.1.522.3.6.4.4.1.1
Boolean on whether or not the Station should use 1Mb/sec management frames to be compatible with Aironet 3100 series radios.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11PhyDSSSTable 1.3.6.1.4.1.522.3.6.4.5
awcDot11PhyDSSSTable attributes. In tabular form to allow for multiple instances on an agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11PhyDSSSEntry

awcDot11PhyDSSSEntry 1.3.6.1.4.1.522.3.6.4.5.1
An entry in the awcDot11PhyDSSSTable table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11PhyDSSSEntry  

awcDot11Compatible4500 1.3.6.1.4.1.522.3.6.4.5.1.1
Boolean on whether or not the Station should use 2Mb/sec management frames to be compatible with Aironet 4500 series radios.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11ChannelAutoImplemented 1.3.6.1.4.1.522.3.6.4.5.1.2
If true, the radio can, when awcDot11StationRole is roleAP, scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. If false, the radio can only establish its BSS on dot11CurrentChannel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

awcDot11ChannelAutoEnabled 1.3.6.1.4.1.522.3.6.4.5.1.3
If true and awcDot11StationRole is roleAP, the radio will scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. After the scan, this station will establish its own BSS on the channel it considers to have the least probability of congestion. If false, this station always establishes its BSS on dot11CurrentChannel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11CurrentChannel 1.3.6.1.4.1.522.3.6.4.5.1.4
The current operating frequency channel of the DSSS PHY, as selected either by selective scanning or via dot11CurrentChannel. Valid channel numbers are as defined in 15.4.6.2
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

awcDot11SupportedDataRatesPrivacyTable 1.3.6.1.4.1.522.3.6.4.11
For each transmit and receive bit rate, whether or not the radio can support WEP encryption at that rate.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11SupportedDataRatesPrivacyEntry

awcDot11SupportedDataRatesPrivacyEntry 1.3.6.1.4.1.522.3.6.4.11.1
An Entry (conceptual row) in the awcDot11SupportedDataRatesPrivacy Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11SupportedDataRatesPrivacyEntry  

awcDot11SupportedDataRatesPrivacyIndex 1.3.6.1.4.1.522.3.6.4.11.1.1
Index object which identifies which data rate to access. Range is 1..8.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

awcDot11SupportedDataRatesPrivacyValue 1.3.6.1.4.1.522.3.6.4.11.1.2
The receive or transmit bit rates supported by the PLCP and PMD, represented by a count from 0x02-0x7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 2..127  

awcDot11SupportedDataRatesPrivacyImplemented 1.3.6.1.4.1.522.3.6.4.11.1.3
Whether or not WEP encryption is supported by the radio for both Transmit and Receive operations at the corresponding bit rate specified by awcDot11SupportedDataRatesPrivacyValue.
Status: mandatory Access: read-only
OBJECT-TYPE    
  TruthValue  

awcDot11ChanSelectTable 1.3.6.1.4.1.522.3.6.4.12
This table specifies for each 802.11 channel, whether the scanning process controlled by the awcDot11ChannelAutoEnabled can select a particular channel for use. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11ChanSelectEntry

awcDot11ChanSelectEntry 1.3.6.1.4.1.522.3.6.4.12.1
Each entry specifies if a particular radio channel is enabled on a radio interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11ChanSelectEntry  

awcDot11ChanSelectChannel 1.3.6.1.4.1.522.3.6.4.12.1.1
802.11 channel which is a candidate for low-occupancy scanning.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..14  

awcDot11ChanSelectEnable 1.3.6.1.4.1.522.3.6.4.12.1.2
If true, awcDot11ChanSelectChannel is available for the system to use as its awcDot11CurrentChannel after scanning for channel occupancy. If false, awcDot11ChanSelectChannel is not available.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

userMgrConfigTable 1.3.6.1.4.1.522.3.7.1
System User attributes.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserMgrConfigEntry

userMgrConfigEntry 1.3.6.1.4.1.522.3.7.1.1
An entry in the user manager table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  UserMgrConfigEntry  

userMgrUserIndex 1.3.6.1.4.1.522.3.7.1.1.1
The index of the user.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

userMgrUserName 1.3.6.1.4.1.522.3.7.1.1.2
The name of the user. This should be unique across all users. Max. string length is 32 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

userMgrPassword 1.3.6.1.4.1.522.3.7.1.1.3
The SHA-1 hashed password of the user in the user manager. When a plaintext password is written, it is automatically replaced by the SHA-1 Secure Hash of that plaintext, prefixed by a 4-octet magic cookie. Max. string length is 24 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..24)  

userMgrCapabilities 1.3.6.1.4.1.522.3.7.1.1.4
Bitmask of the capabilities of the user. The value may be any combination (sum) of the following capability values: 0 = none 1 = Administrator 2 = Write 4 = Firmware Update 8 = Identity Update 16 = SNMP Community
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

userMgrStatus 1.3.6.1.4.1.522.3.7.1.1.5
Row status of the user. Allows deletion via SNMP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

enableUserMgr 1.3.6.1.4.1.522.3.7.2
If true, the User Manager subsystem is active. Web page, console, and SNMP access is restricted in accordance with userMgrCapabilities. If false, all users have full access to the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

allowBrowseWithoutLogin 1.3.6.1.4.1.522.3.7.3
If true, the HTTP user interface to read-only web pages can be accessed without passing HTTP authentication. If false, any HTTP access requires the user to pass HTTP authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

protectLegalPage 1.3.6.1.4.1.522.3.7.4
Should the legal credits page be protected or not.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

defaultWebRoot 1.3.6.1.4.1.522.3.8.1
File directory which contains the system's web site root file index.shm. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

defaultHelpRoot 1.3.6.1.4.1.522.3.8.2
URL identifying the directory in which help pages for the system are located. This URL is prefixed to all help page links. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

getWebUI 1.3.6.1.4.1.522.3.8.3
The name of an auxilliary set of HTML user interface files to be loaded at system boot time from defaultFileServer. Archive formats accepted include .tar and .tar.gz. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

cmdInvokeGetWebUI 1.3.6.1.4.1.522.3.8.4
Initiate loading of the getWebUI file. Commands recognized: start.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcInvokeCommand  

cmdStatusGetWebUI 1.3.6.1.4.1.522.3.8.5
Status of the most recent command to load the auxilliary web User Interface pages. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = File not found on the file server. 12 = Insufficient memory to load all files. 20 = Identifier encountered while decoding is an ordinary file, not a directory. 22 = No file specified, or invalid file format. 35 = File format is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcHttpdPort 1.3.6.1.4.1.522.3.8.6
IP port number over which to perform HTTP operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

awcConsoleAutoApply 1.3.6.1.4.1.522.3.8.7
The current state of 'auto apply' mode on the console browser.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

resolverDomain 1.3.6.1.4.1.522.3.9.1
The name of the resolver domain currently in use by the system. Max. string length of 128 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

resolverDomainSuffix 1.3.6.1.4.1.522.3.9.2
The suffix name of the resolver domain. Used to abbreviate displayed host names. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

resolverDomainServerTable 1.3.6.1.4.1.522.3.9.3
Table of DNS Name Servers currently in use by the system.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ResolverDomainServerEntry

resolverDomainServerEntry 1.3.6.1.4.1.522.3.9.3.1
An entry in resolverDomainServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  ResolverDomainServerEntry  

resolverDomainServerPriority 1.3.6.1.4.1.522.3.9.3.1.1
The priority order in which a domain name server is queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

resolverDomainServer 1.3.6.1.4.1.522.3.9.3.1.2
The IP Address of a domain name server currently in use by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

defaultResolverDomain 1.3.6.1.4.1.522.3.9.4
The name of the resolver domain to be used by the system unless overridden by a BOOTP or DHCP server. Max. string length of 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

defaultResolverDomainServerTable 1.3.6.1.4.1.522.3.9.5
Table of DNS Name Servers to be used by the system unless overridden by a BOOTP or DHCP server.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DefaultResolverDomainServerEntry

defaultResolverDomainServerEntry 1.3.6.1.4.1.522.3.9.5.1
An entry in defaultResolverDomainServerTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  DefaultResolverDomainServerEntry  

defaultResolverDomainServerPriority 1.3.6.1.4.1.522.3.9.5.1.1
The priority order in which a domain name server is queried.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..3  

defaultResolverDomainServer 1.3.6.1.4.1.522.3.9.5.1.2
The IP Address of a domain name server to be used by the system unless overridden by a BOOTP or DHCP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

snmpTrapDest 1.3.6.1.4.1.522.3.10.1
The destination of an SNMP trap. This may be any DNS-recognizable IP address. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

snmpTrapCommunity 1.3.6.1.4.1.522.3.10.2
The community name of the trap. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

defaultSntpServer 1.3.6.1.4.1.522.3.11.1
The name of the SNTP server to be use by the system, unless overridden by a BOOTP or DHCP server. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

sntpServer 1.3.6.1.4.1.522.3.11.2
The name of the SNTP server currently in use by the system. Max. string length is 128 octets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcFtMcastAddr 1.3.6.1.4.1.522.3.12.1.1
Count of multicast addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtDsHost 1.3.6.1.4.1.522.3.12.1.3
Count of DS (infrastructure) host addresses observed by the system over its own DS network interface (Ethernet).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtBridgeHost 1.3.6.1.4.1.522.3.12.1.5
Count of DS (infrastructure) host addresses observed by the system on the remote side of a bridge.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtClientSTA 1.3.6.1.4.1.522.3.12.1.7
Count of Client Station addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtClientSTASelf 1.3.6.1.4.1.522.3.12.1.8
Count of Client Stations which are Associated to the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtBridge 1.3.6.1.4.1.522.3.12.1.9
Count of non-root Bridge addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtBridgeSelf 1.3.6.1.4.1.522.3.12.1.10
Count of non-root Bridges which are Associated to the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtRepeater 1.3.6.1.4.1.522.3.12.1.11
Count of Repeater addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtRepeaterSelf 1.3.6.1.4.1.522.3.12.1.12
Count of Repeater devices which are Associated to the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtAccessPoint 1.3.6.1.4.1.522.3.12.1.13
Count of Access Point addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtBridgeRoot 1.3.6.1.4.1.522.3.12.1.15
Count of Root Bridge addresses observed by the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcFtMaxNumEntries 1.3.6.1.4.1.522.3.12.2.1
The maximum number of entries in the forwarding table. Must be a power of 2 from 1024 to 65536. The number of entries controls the size of the forwarding table and the hash algorithm used by the forwarding table. Changing the number of entries requires a system reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

awcFtTimeoutSecUnknown 1.3.6.1.4.1.522.3.12.2.2
The default number of seconds an Entry with awcTpFdbClassID=unknown will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecMcastAddr 1.3.6.1.4.1.522.3.12.2.3
The default number of seconds an Entry with awcTpFdbClassID=multicast will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecDsHost 1.3.6.1.4.1.522.3.12.2.4
The default number of seconds an Entry with awcTpFdbClassID=dsHost will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecBridgeHost 1.3.6.1.4.1.522.3.12.2.5
The default number of seconds an Entry with awcTpFdbClassID=bridgeHost will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecClientSTA 1.3.6.1.4.1.522.3.12.2.6
The default number of seconds an Entry with awcTpFdbClassID=clientStation will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecBridge 1.3.6.1.4.1.522.3.12.2.7
The default number of seconds an Entry with awcTpFdbClassID=bridge will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecRepeater 1.3.6.1.4.1.522.3.12.2.8
The default number of seconds an Entry with awcTpFdbClassID=repeater will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecAccessPoint 1.3.6.1.4.1.522.3.12.2.9
The default number of seconds an Entry with awcTpFdbClassID=accessPoint will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtTimeoutSecBridgeRoot 1.3.6.1.4.1.522.3.12.2.10
The default number of seconds an Entry with awcTpFdbClassID=bridgeRoot will remain in the Forwarding Table before being staled-out.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcFtEnableAwcTpFdbTable 1.3.6.1.4.1.522.3.12.2.11
If true, the system will populate the awcTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the awcTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcFtEnableMacAuthServer 1.3.6.1.4.1.522.3.12.2.12
If true, the system will contact a AAA server for retrieving dot1dStaticTable information for new forwarding table entries if a dot1dStaticTable entry does not already exist for the host address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcFtRogueApAlertTimeout 1.3.6.1.4.1.522.3.12.2.13
The minimum number of minutes after a Possible Rogue status is reported about a device before another Possible Rogue status report is issued by this system about the same device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..1440  

awcFtEnableMacOrEapAuth 1.3.6.1.4.1.522.3.12.2.14
If true, the system grants full access to those clients which have successfully completed either MAC or EAP authentication.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcFtDot1dTpFdbTableEnable 1.3.6.1.4.1.522.3.12.2.15
If true, the system will populate the dot1dTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the dot1dTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcFtEnableMcastMapping 1.3.6.1.4.1.522.3.12.2.16
If true, the system will map multicast forwarding table entries to the broadcast entry. This improves speed and memory utilization. If false, the system will create an entry for each unique multicast address. This improves management statistics and allows filtering of specific multicast addresses.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcFtAssocTblRefreshTime 1.3.6.1.4.1.522.3.12.2.17
The minimum interval, in seconds, at which an access point refreshes its view of the 802.11 network topology of the entire subnet to which it is attached (its native VLAN). A shorter interval results in more reliable packet forwarding, at the cost of additional network and AP memory overhead. A value of 0 disables background 802.11 topology updates.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 0..86400  

awcTpFdbTable 1.3.6.1.4.1.522.3.12.3
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function for maintaining statistics about each entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcTpFdbEntry

awcTpFdbEntry 1.3.6.1.4.1.522.3.12.3.1
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcTpFdbEntry  

awcTpFdbAddress 1.3.6.1.4.1.522.3.12.3.1.1
A MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcTpFdbClassID 1.3.6.1.4.1.522.3.12.3.1.2
Observed general 802.11 classification of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcTpFdbClassID  

awcTpFdbSrcPktsImmed 1.3.6.1.4.1.522.3.12.3.1.3
Number of observed packets for which this entry was the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbSrcOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.4
Number of observed octets for which this entry was the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbSrcErrorPktsImmed 1.3.6.1.4.1.522.3.12.3.1.5
Number of observed error packets for which this entry was the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbSrcErrorOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.6
Number of observed error octets for which this entry was the source.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbDestPktsImmed 1.3.6.1.4.1.522.3.12.3.1.7
Number of observed packets for which this entry was the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbDestOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.8
Number of observed octets for which this entry was the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbDestErrorPktsImmed 1.3.6.1.4.1.522.3.12.3.1.9
Number of observed error packets for which this entry was the destination. This count includes awcTpFdbDestMaxRetryErrorsImmed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbDestErrorOctetsImmed 1.3.6.1.4.1.522.3.12.3.1.10
Number of observed error octets for which this entry was the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbDestMaxRetryErrorsImmed 1.3.6.1.4.1.522.3.12.3.1.11
Number of observed max-retry error packets for which this entry was the destination.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbIPv4Addr 1.3.6.1.4.1.522.3.12.3.1.16
Observed IPv4 network address of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

awcTpFdbDdpTable 1.3.6.1.4.1.522.3.12.4
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only Aironet-specific information about each entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcTpFdbDdpEntry

awcTpFdbDdpEntry 1.3.6.1.4.1.522.3.12.4.1
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcTpFdbDdpEntry  

awcTpFdbDdpAddress 1.3.6.1.4.1.522.3.12.4.1.1
A MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcTpFdbDdpSysName 1.3.6.1.4.1.522.3.12.4.1.2
The Aironet DDP System Name of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..255)  

awcTpFdbDdpProdDevID 1.3.6.1.4.1.522.3.12.4.1.3
The Aironet DDP Product Device ID of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcDdpProdDevID  

awcTpFdbDdpRadioDevID 1.3.6.1.4.1.522.3.12.4.1.4
The Aironet DDP Radio Device ID of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcDdpRadioDevID  

awcTpFdbDdpSwVerMajor 1.3.6.1.4.1.522.3.12.4.1.5
The Aironet DDP Major Software Version Number of the entry. If unknown, the value 0 is returned.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

awcTpFdbDdpSwVerMinor 1.3.6.1.4.1.522.3.12.4.1.6
The Aironet DDP Minor Software Version Number of the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

awcTpFdbDdpSwVerBeta 1.3.6.1.4.1.522.3.12.4.1.7
The Aironet DDP Beta Software Version Number of the entry. This number is always 0 for officially-released software.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

awcTpFdbDdpUptime 1.3.6.1.4.1.522.3.12.4.1.8
The time in seconds that the entry has been operational.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcTpFdbDdpNumAnnounceSent 1.3.6.1.4.1.522.3.12.4.1.9
The number of times the entry itself believes that it has issued some form of Aironet DDP Presense Announcement. If this field decreases, the entry has probably been reset.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcTpFdbDdpNumAssociated 1.3.6.1.4.1.522.3.12.4.1.10
The number of Stations currently Associated with the entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..2007  

awcTpFdbDdpLoad 1.3.6.1.4.1.522.3.12.4.1.11
An approximation of the percentage of offered vs. theoretically-available load on the host's radio interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..100  

awcTpFdbDdpDistFromDS 1.3.6.1.4.1.522.3.12.4.1.12
The Bridging Distance or Number of Hops between the entry and the backbone Distribution System (DS). If 0, the entry is directly connected to the DS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

awcDot11TpFdbTable 1.3.6.1.4.1.522.3.12.5
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only 802.11-specific information about each entry.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot11TpFdbEntry

awcDot11TpFdbEntry 1.3.6.1.4.1.522.3.12.5.1
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot11TpFdbEntry  

awcDot11TpFdbAddress 1.3.6.1.4.1.522.3.12.5.1.1
A MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcDot11TpFdbAID 1.3.6.1.4.1.522.3.12.5.1.2
AID with which the Station is associated with this system, or 2008 if the Station is not currently known to be associated. If the entry is multicast, awcDot11TpFdbAID is 0. Note that the uplink from a Client or Repeater AP to its parent is always AID 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbClientState 1.3.6.1.4.1.522.3.12.5.1.3
802.11 Service State of the Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcDot11ClientState  

awcDot11TpFdbTxShortRetries 1.3.6.1.4.1.522.3.12.5.1.4
The total number of 802.11 Short Retries incurred across all packet Transmission Attempts to this Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11TpFdbTxLongRetries 1.3.6.1.4.1.522.3.12.5.1.5
The total number of 802.11 Long Retries incurred across all packet Transmission Attempts to this Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11TpFdbLatestTxShortRetries 1.3.6.1.4.1.522.3.12.5.1.6
The number of 802.11 Short Retries incurred during the most recent packet Transmission Attempts to this Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11TpFdbLatestTxLongRetries 1.3.6.1.4.1.522.3.12.5.1.7
The number of 802.11 Long Retries incurred during the most recent packet Transmission Attempts to this Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11TpFdbRxWEPErrors 1.3.6.1.4.1.522.3.12.5.1.8
The total number of packets received from this Station which failed to be properly decrypted via the WEP security mechanism.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcDot11TpFdbLatestRxSignalStrength 1.3.6.1.4.1.522.3.12.5.1.9
A device-dependent measure of the signal strength of the most recently received packet from this Station. Might be normalized or unnormalized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbLatestRxSignalQuality 1.3.6.1.4.1.522.3.12.5.1.10
A device-dependent measure of the signal quality of the most recently received packet from this Station.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbCapabilities 1.3.6.1.4.1.522.3.12.5.1.11
The possible 802.11 capabilities of the Station's radio.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbListenInterval 1.3.6.1.4.1.522.3.12.5.1.12
The number of beacon intervals across which a the Station will sleep in power-save mode, or 1 if the Station will never be in power-save mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbSupportedDataRates 1.3.6.1.4.1.522.3.12.5.1.13
This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 255, the lower seven bits 0..6 of which corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. If set, Bit 7 of the rate specification indicates that rate is a member of the Basic Rate Set of the access point.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..126)  

awcDot11TpFdbPreferredTxRate 1.3.6.1.4.1.522.3.12.5.1.14
The transmission rate at which a packet should currently be transmitted from an AP to this Station. This rate does not carry information about whether or not the rate is in the Basic Rate Set (i.e. bit 0x80 is never set).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcDot11TpFdbCurrentBSS 1.3.6.1.4.1.522.3.12.5.1.15
BSS to which the station is currently Associated, or 00:00:00:00:00:00 if the station's current AP is unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcDot11TpFdbSSID 1.3.6.1.4.1.522.3.12.5.1.16
If the Station is Associated to this AP, the SSID via which the Station Associated. If 0, the Station Associated via dot11DesiredSSID. If greater than 0, the Station Associated through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID. If -1, the Station is not currently Associated to this AP.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER -1..2007  

awcDot11TpFdbVlanId 1.3.6.1.4.1.522.3.12.5.1.17
Numeric ID of the VLAN over which the Station is communicating. If 0, the Station is not known to be communicating over any specific VLAN.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcVlanId  

awcDot1dTpPortTable 1.3.6.1.4.1.522.3.12.6
A table that contains information about every port that is associated with this transparent bridge. This table contains information about host and protocol filtering for the port. Each entry represents a transparent bridge port on the device. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDot1dTpPortEntry

awcDot1dTpPortEntry 1.3.6.1.4.1.522.3.12.6.1
A list of filtering information for each port of a transparent bridge. This information includes packet forwarding permission for unicast and non-unicast frames and filters ID used for the filtering.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDot1dTpPortEntry  

awcDot1dTpPortDefaultUcastAllowedToGoTo 1.3.6.1.4.1.522.3.12.6.1.1
The set of ports to which frames received from a specific port and destined for a unicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

awcDot1dTpPortDefaultNUcastAllowedToGoTo 1.3.6.1.4.1.522.3.12.6.1.2
The set of ports to which frames received from a specific port and destined for a multicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

awcDot1dTpPortMaxNUcastPerSecond 1.3.6.1.4.1.522.3.12.6.1.3
The maximum number of multicast packets allowed to be forwarded over the port each second. If 0, the number of multicasts is unlimited.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultInEthertypeFilterId 1.3.6.1.4.1.522.3.12.6.1.4
awcPfEtSetId of the Ethertype Filter Set to apply to packets received over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultOutEthertypeFilterId 1.3.6.1.4.1.522.3.12.6.1.5
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultInIpProtoFilterId 1.3.6.1.4.1.522.3.12.6.1.6
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultOutIpProtoFilterId 1.3.6.1.4.1.522.3.12.6.1.7
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultInIpPortFilterId 1.3.6.1.4.1.522.3.12.6.1.8
awcPfIptSetId of the IP Port Filter Set to apply to packets received over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDot1dTpPortDefaultOutIpPortFilterId 1.3.6.1.4.1.522.3.12.6.1.9
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted over this port. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcTpFdbAlertTable 1.3.6.1.4.1.522.3.12.7
A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only packet-trace alert statistics. Each entry is indexed by a MAC address in the packet forwarding. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcTpFdbAlertEntry

awcTpFdbAlertEntry 1.3.6.1.4.1.522.3.12.7.1
Information about a specific MAC address for which the bridge has some forwarding and/or filtering information.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcTpFdbAlertEntry  

awcTpFdbAlertAddress 1.3.6.1.4.1.522.3.12.7.1.1
A MAC address for which the bridge has forwarding and/or filtering information.
Status: mandatory Access: read-only
OBJECT-TYPE    
  MacAddress  

awcTpFdbFromAlertSrcPktsImmed 1.3.6.1.4.1.522.3.12.7.1.2
The total number of packets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbFromAlertSrcOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.3
The total number of octets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbToAlertDestPktsImmed 1.3.6.1.4.1.522.3.12.7.1.4
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbToAlertDestOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.5
The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbAlertSentAlertTypePktsImmed 1.3.6.1.4.1.522.3.12.7.1.6
The total number of packets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbAlertSentAlertTypeOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.7
The total number of octets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbAlertRcvdAlertTypePktsImmed 1.3.6.1.4.1.522.3.12.7.1.8
The total number of packets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcTpFdbAlertRcvdAlertTypeOctetsImmed 1.3.6.1.4.1.522.3.12.7.1.9
The total number of octets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventOffsetGMT 1.3.6.1.4.1.522.3.14.1
The current offset from GMT in minutes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER -720..720  

awcEventUseDaylightSavingsTime 1.3.6.1.4.1.522.3.14.2
If true, daylight savings time is used.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEventTimestampGMT 1.3.6.1.4.1.522.3.14.3
GMT Time, in seconds since January 1, 1970, when the system wall-clock time was last set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

awcEventUptimeModifiedGMT 1.3.6.1.4.1.522.3.14.4
System uptime, in seconds, when the system wall-clock time was last set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

awcEventDisplayWallClockTime 1.3.6.1.4.1.522.3.14.5
If true, time display on the system's web pages and console is in wall-clock time. If false, time display is in system uptime.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEventDisplayUptimeAscending 1.3.6.1.4.1.522.3.14.6
If true, time display in system uptime is measured from the time the system boots, forward. If false, time display in measured from the current time backwards.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEventDetailDefault 1.3.6.1.4.1.522.3.14.7
Detail level at which, by default, events are displayed. General detail level classifications are: 8 - no display at all 16 - sparse detail 24 - normal detail 32 - verbose detail 40 - exhaustive detail
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

awcEventSeverityDispConsole 1.3.6.1.4.1.522.3.14.8
If an event has a severity level greater than or equal to awcEventSeverityDispConsole, it is displayed on the console shortly after it occurs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventSeverity  

awcEventSeverityDispHtmlGUI 1.3.6.1.4.1.522.3.14.9
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlGUI, it is displayed on the the Event Log GUI web pages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventSeverity  

awcEventSeverityDispHtmlConsole 1.3.6.1.4.1.522.3.14.10
If an event has a severity level greater than or equal to awcEventSeverityDispHtmlConsole, it is displayed on the the Event Log console browser pages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventSeverity  

awcEventAlertSNMP 1.3.6.1.4.1.522.3.14.11
If true, events of a severity with Disposition set to notify will generate an SNMP trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEventAlertSyslog 1.3.6.1.4.1.522.3.14.12
If true, events of a severity with Disposition set to notify will generate a sysLog message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEventCntSeverityNULL 1.3.6.1.4.1.522.3.14.14.1
NULL message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeveritySilent 1.3.6.1.4.1.522.3.14.14.2
Silent message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeveritySystemFatal 1.3.6.1.4.1.522.3.14.14.3
Fatal system message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityProtocolFatal 1.3.6.1.4.1.522.3.14.14.4
Fatal Protocol message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityPortFatal 1.3.6.1.4.1.522.3.14.14.5
Fatal Port message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeveritySystemAlert 1.3.6.1.4.1.522.3.14.14.6
System Alert message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityProtocolAlert 1.3.6.1.4.1.522.3.14.14.7
Protocol Alert message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityPortAlert 1.3.6.1.4.1.522.3.14.14.8
Port Alert message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityExternalAlert 1.3.6.1.4.1.522.3.14.14.9
External Alert message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeveritySystemWarning 1.3.6.1.4.1.522.3.14.14.10
System Warning message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityProtocolWarning 1.3.6.1.4.1.522.3.14.14.11
Protocol Warning message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityPortWarning 1.3.6.1.4.1.522.3.14.14.12
Port Warning message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityExternalWarning 1.3.6.1.4.1.522.3.14.14.13
External Warning message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeveritySystemInfo 1.3.6.1.4.1.522.3.14.14.14
System Info message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityProtocolInfo 1.3.6.1.4.1.522.3.14.14.15
Protocol Info message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityPortInfo 1.3.6.1.4.1.522.3.14.14.16
Port Info message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventCntSeverityExternalInfo 1.3.6.1.4.1.522.3.14.14.17
External Info message counter.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

awcEventDispSeverityNULL 1.3.6.1.4.1.522.3.14.15.1
NULL message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeveritySilent 1.3.6.1.4.1.522.3.14.15.2
Silent message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeveritySystemFatal 1.3.6.1.4.1.522.3.14.15.3
Fatal system message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityProtocolFatal 1.3.6.1.4.1.522.3.14.15.4
Fatal Protocol message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityPortFatal 1.3.6.1.4.1.522.3.14.15.5
Fatal Port message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeveritySystemAlert 1.3.6.1.4.1.522.3.14.15.6
System Alert message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityProtocolAlert 1.3.6.1.4.1.522.3.14.15.7
Protocol Alert message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityPortAlert 1.3.6.1.4.1.522.3.14.15.8
Port Alert message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityExternalAlert 1.3.6.1.4.1.522.3.14.15.9
External Alert message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeveritySystemWarning 1.3.6.1.4.1.522.3.14.15.10
System Warning message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityProtocolWarning 1.3.6.1.4.1.522.3.14.15.11
Protocol Warning message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityPortWarning 1.3.6.1.4.1.522.3.14.15.12
Port Warning message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityExternalWarning 1.3.6.1.4.1.522.3.14.15.13
External Warning message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeveritySystemInfo 1.3.6.1.4.1.522.3.14.15.14
System Info message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityProtocolInfo 1.3.6.1.4.1.522.3.14.15.15
Protocol Info message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityPortInfo 1.3.6.1.4.1.522.3.14.15.16
Port Info message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventDispSeverityExternalInfo 1.3.6.1.4.1.522.3.14.15.17
External Info message disposition.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventDisposition  

awcEventSyslogAddr 1.3.6.1.4.1.522.3.14.16
The destination of a sysLog message. This address must be numeric or DNS resolvable. Max. string length is 128 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcEventSyslogFacility 1.3.6.1.4.1.522.3.14.17
The facility number encoded within a sysLog message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8191  

awcEventTraceStationSeverity 1.3.6.1.4.1.522.3.14.20
Severity at which all Detailed Packet Trace events shall be handled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcEventSeverity  

awcEventTraceLogSize 1.3.6.1.4.1.522.3.14.21
Size in octets of the system Detailed Event Trace Buffer. Note that this buffer is statically allocated at system initialization time. Changing the size of the buffer requires a system reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 0..8388608  

awcEventTracePacketLen 1.3.6.1.4.1.522.3.14.22
Maximum size in octets of each Packet Trace Event recorded in the Detailed Event Trace Buffer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 0..2312  

awcEventTable 1.3.6.1.4.1.522.3.14.23
SNMP access to Event Log table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcEventEntry

awcEventEntry 1.3.6.1.4.1.522.3.14.23.1
An entry in awcEventTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcEventEntry  

awcEventID 1.3.6.1.4.1.522.3.14.23.1.1
System-unique identifier of the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcEventTime 1.3.6.1.4.1.522.3.14.23.1.2
System time at which the event occurred.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

awcEventSeverity 1.3.6.1.4.1.522.3.14.23.1.3
Severity of the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcEventSeverity  

awcEventDescription 1.3.6.1.4.1.522.3.14.23.1.4
Detailed description of the event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

awcEventType 1.3.6.1.4.1.522.3.14.23.1.5
Specific type of the event. The type is unique for each test condition which can result in event generation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

awcEventUseCiscoFormat 1.3.6.1.4.1.522.3.14.25
If true, the system will generate syslog messages using Cisco standard EMBLEM- compliant format. If false, syslog will use legacy Aironet format.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDot11AuthenticateFailDisposition 1.3.6.1.4.1.522.3.14.26
Specifies how standard IEEE trap dot11AuthenticateFail is handled on the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcDot11EventDisposition  

awcDot11DeauthenticateDisposition 1.3.6.1.4.1.522.3.14.27
Specifies how standard IEEE 802.11 trap dot11Deauthenticate is handled on the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcDot11EventDisposition  

awcDot11DisassociateDisposition 1.3.6.1.4.1.522.3.14.28
Specifies how standard IEEE 802.11 trap dot11Disassociate is handled on the system.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcDot11EventDisposition  

awcEtherIfSpeedSelect 1.3.6.1.4.1.522.3.15.1
Requested Ethernet interface speed and duplex.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER tenBaseT(3), oneHundredBaseT(5), tenBaseTfull(6), oneHundredBaseTfull(7), autoDetect(8)  

awcEtherDuplex 1.3.6.1.4.1.522.3.15.5
Actual Ethernet interface duplex, after any line negotiation has taken place.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER half(1), full(2)  

awcEtherCamSize 1.3.6.1.4.1.522.3.15.7
Number of entries in the hardware Content Addressible Memory MAC address filter available to the Ethernet controller.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcEtherEnableSwCam 1.3.6.1.4.1.522.3.15.8
If true, the Ethernet driver makes use of a Software Content Addressible Memory when making packet-forwarding decisions. When true, forwarding decisions are much faster, but network statistics collection is much coarser. If false, all packet-forwarding decisions are made by the higher-level packet-bridging logic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEtherForcePortUnblock 1.3.6.1.4.1.522.3.15.9
If true, the Ethernet port has dot1dStpPortState forced to forwarding even when the Spanning Tree Protocol is not enabled. This provides rapid port re-establishment at the potential cost of not detecting network topology loops involving the Ethernet and other network interfaces such as the radio. If false, the Ethernet port is blocked whenever there exists the potential for a network topology loop and the Spanning Tree Protocol is not enabled to guard against such loops.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcEtherLostEthernetSeconds 1.3.6.1.4.1.522.3.15.10
Number of seconds the system must detect loss of backbone connectivity (i.e. loss of Ethernet link and no active trunks available on any of the radios) before taking the action specified by awcEtherLostEthernetAction.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..10000  

awcEtherLostEthernetAction 1.3.6.1.4.1.522.3.15.11
Action taken by the system when a loss of backbone connectivity condition occurs for a period of time longer than awcEtherLostEthernetSeconds.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER noAction(1), switchRepeater(2), radioOff(3), restrictSSID(4)  

awcEtherLostEthernetSSID 1.3.6.1.4.1.522.3.15.12
The single SSID index required by the system if awcEtherLostEthernetAction is restrictSSID and backbone connectivity is lost for a period of time longer than awcEtherLostEthernetSeconds. If 0, only Association to dot11DesiredSSID is allowed. If non-0, only Association to the auxiliary SSID with the corresponding awcDot11AuxSSIDIndex is allowed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpTable 1.3.6.1.4.1.522.3.16.1
Table of named groups of related protocol filters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPolGrpEntry

awcPolGrpEntry 1.3.6.1.4.1.522.3.16.1.1
An entry in awcPolGrpTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPolGrpEntry  

awcPolGrpId 1.3.6.1.4.1.522.3.16.1.1.1
Numeric identifier of the Policy Group.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  Gauge 1..1023  

awcPolGrpName 1.3.6.1.4.1.522.3.16.1.1.2
Descriptive name of the Policy Group. Max. string length is 64 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

awcPolGrpStatus 1.3.6.1.4.1.522.3.16.1.1.3
Row status of the entire Policy Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPolGrpInEthertypeFilterId 1.3.6.1.4.1.522.3.16.1.1.4
awcPfEtSetId of the Ethertype Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpOutEthertypeFilterId 1.3.6.1.4.1.522.3.16.1.1.5
awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpInIpProtoFilterId 1.3.6.1.4.1.522.3.16.1.1.6
awcPfIppSetId of the IP Protocol Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpOutIpProtoFilterId 1.3.6.1.4.1.522.3.16.1.1.7
awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpInIpPortFilterId 1.3.6.1.4.1.522.3.16.1.1.8
awcPfIptSetId of the IP Port Filter Set to apply to packets received subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPolGrpOutIpPortFilterId 1.3.6.1.4.1.522.3.16.1.1.9
awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcDscpToCosMapEnable 1.3.6.1.4.1.522.3.16.2
If true, IP packets which are not already classified with a non-default Class of Service (CoS) can be classified by reference to their Differentiated Services Code-Point (DSCP) value. If false, unclassified IP packets are not subject to DSCP classification.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcDscpToCosMapTable 1.3.6.1.4.1.522.3.16.3
This (conceptual) table to statically map Differentiated Services Code-Point (DSCP) values to corresponding Class of Service (CoS) values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcDscpToCosMapEntry

awcDscpToCosMapEntry 1.3.6.1.4.1.522.3.16.3.1
An Entry (conceptual row) in the Aironet DSCP To CoS mapping table to statically map a Differentiated Services Code-Point (DSCP) value to corresponding Class of Service (CoS) value.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcDscpToCosMapEntry  

awcDscpToCosMapDscp 1.3.6.1.4.1.522.3.16.3.1.1
The auxiliary variable used to identify instances of the columnar objects in the Aironet Differentiated Services Code-Point (DSCP) to Class of Service (CoS) Mapping Table. This variable directly corresponds to a Differentiated Services Code-Point, plus 1. The value may be used for marking a traffic stream.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

awcDscpToCosMapCos 1.3.6.1.4.1.522.3.16.3.1.2
A value of Class of Service (CoS) mapped to the DSCP value awcDscpToCosMapDscp. This object corresponds directly to the 802.1D traffic category ID, plus 1. The matching values are therefore in the range 1 through 8. The value 0 indicates that no matching CoS is configured for the corresponding awcDscpToCosMapDscp.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..8  

awcIappMcastIpAddr 1.3.6.1.4.1.522.3.17.1
Multicast IP network address over which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 224.0.1.40.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

awcIappPort 1.3.6.1.4.1.522.3.17.2
IP port identifier through which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 2887.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

awcP802dot1XVersion 1.3.6.1.4.1.522.3.17.100
Version of the 802.1X Protocol specification which the AP will apply for incoming and outgoing EAPOL traffic. Versions with 'd' designators are draft specifications. The 802.1x-2001 standard is the same as draft 10.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER d7(7), d8(8), d10(10)  

awcHotStandbyMACAddr 1.3.6.1.4.1.522.3.18.1
The MAC address of the target unit which is being monitored.
Status: mandatory Access: read-write
OBJECT-TYPE    
  MacAddress  

awcHotStandbyPollingFrequency 1.3.6.1.4.1.522.3.18.2
The frequency (in seconds) that the monitored target unit is being polled for testing its health.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..30  

awcHotStandbyPollingTimeOut 1.3.6.1.4.1.522.3.18.3
The total time (in seconds) that the monitoring unit can tolerate the failure at polling the monitored target unit. After this duration, one more failure of the polling will trigger the standby unit to take the role of monitored unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..600  

awcHotStandbyInHotStandby 1.3.6.1.4.1.522.3.18.4
If true, the current unit is in its monitoring mode, i.e., if the unit is or will be a hot standby device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcHotStandbyState 1.3.6.1.4.1.522.3.18.5
The current state, e.g., running, stopped, ... of the hotstandby.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcHotStandbyState  

awcHotStandbyStatus 1.3.6.1.4.1.522.3.18.6
The current stateus, e.g., error, OK, ... of the hotstandby.
Status: mandatory Access: read-only
OBJECT-TYPE    
  AwcHotStandbyStatus  

awcAaaServerTable 1.3.6.1.4.1.522.3.19.1
This table provides information of AAA servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcAaaServerEntry

awcAaaServerEntry 1.3.6.1.4.1.522.3.19.1.1
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and authentication mechanisms supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcAaaServerEntry  

awcAaaServerPriority 1.3.6.1.4.1.522.3.19.1.1.1
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

awcAaaServerProtocol 1.3.6.1.4.1.522.3.19.1.1.2
The protocol used to communicate with the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER radius(1), tacacsPlus(2)  

awcAaaServerName 1.3.6.1.4.1.522.3.19.1.1.3
The DNS-resolvable name or numeric IP address of the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAaaServerPort 1.3.6.1.4.1.522.3.19.1.1.4
The IP port number of the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAaaServerTimeout 1.3.6.1.4.1.522.3.19.1.1.5
The amount of time (in seconds) that an Access Point should wait for a response from the AAA server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAaaServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the AAA server are connected through a low-speed network and the awcAaaServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged requests that have not yet reached the server
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAaaClientName 1.3.6.1.4.1.522.3.19.1.1.6
The name the Access Point uses to identify itself when acting as the supplicant.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAaaServerSharedSecret 1.3.6.1.4.1.522.3.19.1.1.7
The textual string shared between the AAA server and the access point, used to authenticate the messages delivered between them.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAaaServer8021xCapabilityEnabled 1.3.6.1.4.1.522.3.19.1.1.8
Is this server to be used for 802.1X authentication?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAaaServerMacAddrAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.9
Is this server to be used for MAC-address authentication?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAaaServerAdminAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.10
Is this server to be used for AP Admin authentication?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAaaServerMipAuthEnabled 1.3.6.1.4.1.522.3.19.1.1.11
Is this server to be used for Proxy Mobile IP authentication?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAaaServerMaxRetransmission 1.3.6.1.4.1.522.3.19.1.1.12
The maximum number of retransmission of a request. If an Access Point does not receive a response within awcAaaServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen temporarily.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAcctServerTable 1.3.6.1.4.1.522.3.19.2
This table provides information of AAA accounting servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcAcctServerEntry

awcAcctServerEntry 1.3.6.1.4.1.522.3.19.2.1
An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and security mechanisms supported.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcAcctServerEntry  

awcAcctServerPriority 1.3.6.1.4.1.522.3.19.2.1.1
The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..4  

awcAcctServerProtocol 1.3.6.1.4.1.522.3.19.2.1.2
The protocol used to communicate with the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER radius(1), tacacsPlus(2)  

awcAcctServerName 1.3.6.1.4.1.522.3.19.2.1.3
The DNS-resolvable name or numeric IP address of the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAcctServerPort 1.3.6.1.4.1.522.3.19.2.1.4
The IP port number of the AAA server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAcctServerTimeout 1.3.6.1.4.1.522.3.19.2.1.5
The amount of time (in seconds) that an Access Point should wait for a response from the Accounting server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAcctServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the Accounting server are connected through a low-speed network and the awcAcctServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged accounting requests that have not yet reached the server
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAcctServerUpdateEnable 1.3.6.1.4.1.522.3.19.2.1.6
Is the Acct update to this server enabled?.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAcctServerUpdateDelay 1.3.6.1.4.1.522.3.19.2.1.7
The amount of time (in seconds) that the Access Point should send to the AAA server an update of accounting information.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge 60..2592000  

awcAcctClientName 1.3.6.1.4.1.522.3.19.2.1.8
The name the Access Point uses to identify itself when acting as the supplicant.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAcctSecureEnabled 1.3.6.1.4.1.522.3.19.2.1.9
Is this server to be used for accounting with security AUTH?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAcctGeneralEnabled 1.3.6.1.4.1.522.3.19.2.1.10
Is this server to be used for accounting without security AUTH?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAcctServerSharedSecret 1.3.6.1.4.1.522.3.19.2.1.11
The textual string shared between the ACCT server and the access point, used to authenticate the messages delivered between them.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

awcAcctServerMaxRetransmission 1.3.6.1.4.1.522.3.19.2.1.12
The maximum number of retransmissions of an accounting request. If an Access Point does not receive a response within awcAcctServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAcctEnable 1.3.6.1.4.1.522.3.19.3.1
The boolean indicating if the accounting is enabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAcctStopDelayEnable 1.3.6.1.4.1.522.3.19.3.2
The boolean indicating if the accounting stop request should be delayed before sent.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcAcctStopDelayTime 1.3.6.1.4.1.522.3.19.3.3
The duration for the AP to delay sending the STOP message if any.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAaaServerPrimaryReattemptPeriod 1.3.6.1.4.1.522.3.19.4.1
While the primary authentication server serving a given authentication function is not reachable, the duration, in minutes, at which the AP should reattempt to return to its primary server serving that authentication function. A value of zero indicates that primary authentication server reattempt is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcAaaServerDot1xAuthCurrent 1.3.6.1.4.1.522.3.19.4.2
The index of the currently selected AAA server for 802.1X user authentication. A value of zero indicates that no authentication server is available to service 802.1X authentication function to this AP. The value of 1 to 4 indicates the corresponding server for 802.1X authentication.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcAaaServerMacAddrAuthCurrent 1.3.6.1.4.1.522.3.19.4.3
The index of the currently selected AAA server for MAC address authentication. A value of zero indicates that no authentication server is available to service MAC address authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for MAC address authentication function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcAaaServerAdminAuthCurrent 1.3.6.1.4.1.522.3.19.4.4
The index of the currently selected AAA server for the Access Point administrator authentication function. A value of zero indicates that no authentication server is available to service admin login authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for the AP admin authentication function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcAaaServerMipAuthCurrent 1.3.6.1.4.1.522.3.19.4.5
The index of the currently selected AAA server used to retrieve authentication data requied for Proxy Mobile registration and authentication function. A value of zero indicates that no authentication server is available for this function. The value of 1 to 4 indicates the corresponding server in use for proxy mobile IP related authentication function.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..4  

awcAaaServerServiceTypeLoginOnly 1.3.6.1.4.1.522.3.19.4.6
This object sets the AAA service type to be sent to the AAA server. If it is 'true', the Service-Type value for all access requests is of the type 'Login'. If it is 'false', the Service-Type value for re-authentication requests is 'AuthenticationOnly'.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcPrFltEthertypeSetTable 1.3.6.1.4.1.522.3.20.1
Table of static Ethertype Filters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltEthertypeSetEntry

awcPrFltEthertypeSetEntry 1.3.6.1.4.1.522.3.20.1.1
An entry in awcPrFltEthertypeTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltEthertypeSetEntry  

awcPfEtSetId 1.3.6.1.4.1.522.3.20.1.1.1
Numeric identifier of the static Ethertype filters set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcPfEtSetName 1.3.6.1.4.1.522.3.20.1.1.2
Descriptive name of the static Ethertype filters set. Max. string length is 64 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

awcPfEtDefaultDisposition 1.3.6.1.4.1.522.3.20.1.1.3
Default packet disposition of the static Ethertype filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfEtDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.1.1.4
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfEtDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.1.1.5
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfEtSetStatus 1.3.6.1.4.1.522.3.20.1.1.6
Row status of the entire static Ethertype filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPrFltEthertypeTable 1.3.6.1.4.1.522.3.20.2
Table of individual static Ethertype filters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltEthertypeEntry

awcPrFltEthertypeEntry 1.3.6.1.4.1.522.3.20.2.1
An entry in the individual static Ethertype filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltEthertypeEntry  

awcPfEtEthertype 1.3.6.1.4.1.522.3.20.2.1.1
Ethertype (protocol) to which this individual static filter applies
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..255 | 1501..65535  

awcPfEtDisposition 1.3.6.1.4.1.522.3.20.2.1.2
Designation of how the protocol should be handled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfEtUserPriority 1.3.6.1.4.1.522.3.20.2.1.3
Designation of the priority assigned to packets of the Ethertype.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfPriority  

awcPfEtUcastTimeToLive 1.3.6.1.4.1.522.3.20.2.1.4
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfEtNUcastTimeToLive 1.3.6.1.4.1.522.3.20.2.1.5
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfEtAlert 1.3.6.1.4.1.522.3.20.2.1.6
Should an alert be registered when a packet of this Ethertype is observed?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcPfEtStatus 1.3.6.1.4.1.522.3.20.2.1.7
Row status of the individual static Ethertype filters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPrFltIpProtocolSetTable 1.3.6.1.4.1.522.3.20.3
Table of static IP Protocol Filters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltIpProtocolSetEntry

awcPrFltIpProtocolSetEntry 1.3.6.1.4.1.522.3.20.3.1
An entry in awcPrFltIpProtocolTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltIpProtocolSetEntry  

awcPfIppSetId 1.3.6.1.4.1.522.3.20.3.1.1
Numeric identifier of the static IP Protocol filters set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcPfIppSetName 1.3.6.1.4.1.522.3.20.3.1.2
Descriptive name of the static IP Protocol filters set. Max. string length is 64 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

awcPfIppDefaultDisposition 1.3.6.1.4.1.522.3.20.3.1.3
Default packet disposition of the static IP Protocol filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfIppDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.3.1.4
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIppDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.3.1.5
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIppSetStatus 1.3.6.1.4.1.522.3.20.3.1.6
Row status of the entire static IP Protocol filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPrFltIpProtocolTable 1.3.6.1.4.1.522.3.20.4
Table of individual static IP Protocol filters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltIpProtocolEntry

awcPrFltIpProtocolEntry 1.3.6.1.4.1.522.3.20.4.1
An entry in the individual static IP Protocol filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltIpProtocolEntry  

awcPfIppIpProtocol 1.3.6.1.4.1.522.3.20.4.1.1
IP Protocol to which this individual static filter applies
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 0..255  

awcPfIppDisposition 1.3.6.1.4.1.522.3.20.4.1.2
Designation of how the protocol should be handled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfIppUserPriority 1.3.6.1.4.1.522.3.20.4.1.3
Designation of the priority assigned to packets of the IP Protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfPriority  

awcPfIppUcastTimeToLive 1.3.6.1.4.1.522.3.20.4.1.4
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIppNUcastTimeToLive 1.3.6.1.4.1.522.3.20.4.1.5
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIppAlert 1.3.6.1.4.1.522.3.20.4.1.6
Should an alert be registered when a packet of this IP Protocol is observed?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcPfIppStatus 1.3.6.1.4.1.522.3.20.4.1.7
Row status of the individual static IP Protocol filters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPrFltIpPortSetTable 1.3.6.1.4.1.522.3.20.5
Table of static IP Port Filters
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltIpPortSetEntry

awcPrFltIpPortSetEntry 1.3.6.1.4.1.522.3.20.5.1
An entry in awcPrFltIpPortTable.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltIpPortSetEntry  

awcPfIptSetId 1.3.6.1.4.1.522.3.20.5.1.1
Numeric identifier of the static IP Port filters set.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Gauge  

awcPfIptSetName 1.3.6.1.4.1.522.3.20.5.1.2
Descriptive name of the static IP Port filters set. Max. string length is 64 octets.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

awcPfIptDefaultDisposition 1.3.6.1.4.1.522.3.20.5.1.3
Default packet disposition of the static IP Port filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfIptDefaultUcastTimeToLive 1.3.6.1.4.1.522.3.20.5.1.4
Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIptDefaultNUcastTimeToLive 1.3.6.1.4.1.522.3.20.5.1.5
Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIptSetStatus 1.3.6.1.4.1.522.3.20.5.1.6
Row status of the entire static IP Port filters set.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcPrFltIpPortTable 1.3.6.1.4.1.522.3.20.6
Table of individual static IP Port filters.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AwcPrFltIpPortEntry

awcPrFltIpPortEntry 1.3.6.1.4.1.522.3.20.6.1
An entry in the individual static IP Port filter table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  AwcPrFltIpPortEntry  

awcPfIptIpPort 1.3.6.1.4.1.522.3.20.6.1.1
IP Port to which this individual static filter applies
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

awcPfIptDisposition 1.3.6.1.4.1.522.3.20.6.1.2
Designation of how the Port should be handled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfDisposition  

awcPfIptUserPriority 1.3.6.1.4.1.522.3.20.6.1.3
Designation of the priority assigned to packets of the IP Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  AwcPfPriority  

awcPfIptUcastTimeToLive 1.3.6.1.4.1.522.3.20.6.1.4
Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIptNUcastTimeToLive 1.3.6.1.4.1.522.3.20.6.1.5
Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults.
Status: mandatory Access: read-write
OBJECT-TYPE    
  Gauge  

awcPfIptAlert 1.3.6.1.4.1.522.3.20.6.1.6
Should an alert be registered when a packet of this IP Port is observed?
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcPfIptStatus 1.3.6.1.4.1.522.3.20.6.1.7
Row status of the individual static IP Port filters.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

enableMobileIP 1.3.6.1.4.1.522.3.22.1
If true, the Access Point's proxy mobile IP service is enabled. If false, proxy mobile IP service is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcprimAAP 1.3.6.1.4.1.522.3.22.2
The first AAP hostname or IP address from a list of 3 AAPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcsec1AAP 1.3.6.1.4.1.522.3.22.3
The second AAP hostname or IP address from a list of 3 AAPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

awcsec2AAP 1.3.6.1.4.1.522.3.22.4
The third AAP hostname or IP address from a list of 3 AAPs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

mipSATable 1.3.6.1.4.1.522.3.22.5
This entity's Mobile IP Local SA Bindings table.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MipSAEntry

mipSAEntry 1.3.6.1.4.1.522.3.22.5.1
An entry of SA bindings for a range of IP Addresses.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  MipSAEntry  

mipSAIpStart 1.3.6.1.4.1.522.3.22.5.1.1
Starting IP Address of a range for the SA binding.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  IpAddress  

mipSAIpEnd 1.3.6.1.4.1.522.3.22.5.1.2
Ending IP Address of the range for the SA binding.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

mipSAGroupSPI 1.3.6.1.4.1.522.3.22.5.1.3
Group SPI for the range of IP Address in the Local SA binding
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

mipSAGroupKey 1.3.6.1.4.1.522.3.22.5.1.4
Group Key for the range of IP Address in the Local SA binding
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..128)  

mipSAStatus 1.3.6.1.4.1.522.3.22.5.1.5
Row status of the pMIP SA. Allows deletion via SNMP.
Status: mandatory Access: read-write
OBJECT-TYPE    
  RowStatus  

awcmipDebug 1.3.6.1.4.1.522.3.22.6
If true, the Access Point's proxy mobile IP debug information is printed on the console. If false, debug messages are not printed.
Status: mandatory Access: read-write
OBJECT-TYPE    
  TruthValue  

awcTrapLog 4
SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true.
TRAP-TYPE    

awcSystemGroup 1.3.6.1.4.1.522.3.100.2.1
OBJECT IDENTIFIER    

bootconfigVxGroup 1.3.6.1.4.1.522.3.100.2.2
OBJECT IDENTIFIER    

awcSerialDevGroup 1.3.6.1.4.1.522.3.100.2.3
OBJECT IDENTIFIER    

awcFtpGroup 1.3.6.1.4.1.522.3.100.2.4
OBJECT IDENTIFIER    

awcIfTableGroup 1.3.6.1.4.1.522.3.100.2.5
OBJECT IDENTIFIER    

awc802dot11Group 1.3.6.1.4.1.522.3.100.2.6
OBJECT IDENTIFIER    

awcUserMgrGroup 1.3.6.1.4.1.522.3.100.2.7
OBJECT IDENTIFIER    

awcHttpdGroup 1.3.6.1.4.1.522.3.100.2.8
OBJECT IDENTIFIER    

awcDnsResGroup 1.3.6.1.4.1.522.3.100.2.9
OBJECT IDENTIFIER    

awcSnmpGroup 1.3.6.1.4.1.522.3.100.2.10
OBJECT IDENTIFIER    

awcSntpGroup 1.3.6.1.4.1.522.3.100.2.11
OBJECT IDENTIFIER    

awcForwardTblGroup 1.3.6.1.4.1.522.3.100.2.12
OBJECT IDENTIFIER    

awcEventLogGroup 1.3.6.1.4.1.522.3.100.2.14
OBJECT IDENTIFIER    

awcEtherMIBGroup 1.3.6.1.4.1.522.3.100.2.15
OBJECT IDENTIFIER    

awcPolicyGroupsGroup 1.3.6.1.4.1.522.3.100.2.16
OBJECT IDENTIFIER    

awcDdpIAPPGroup 1.3.6.1.4.1.522.3.100.2.17
OBJECT IDENTIFIER    

awcHotStandbyGroup 1.3.6.1.4.1.522.3.100.2.18
OBJECT IDENTIFIER    

awcAaaGroup 1.3.6.1.4.1.522.3.100.2.19
OBJECT IDENTIFIER    

awcProtocolFiltersGroup 1.3.6.1.4.1.522.3.100.2.20
OBJECT IDENTIFIER    

awcMobileIpGroup 1.3.6.1.4.1.522.3.100.2.21
OBJECT IDENTIFIER    

awcEthernetLostGroup 1.3.6.1.4.1.522.3.100.2.22
OBJECT IDENTIFIER    

awc802dot11GroupExt1 1.3.6.1.4.1.522.3.100.2.23
OBJECT IDENTIFIER    

awcForwardTblGroupExt1 1.3.6.1.4.1.522.3.100.2.24
OBJECT IDENTIFIER    

awcForwardTblGroupExt2 1.3.6.1.4.1.522.3.100.2.25
OBJECT IDENTIFIER    

awcAaaGroupRev1 1.3.6.1.4.1.522.3.100.2.26
OBJECT IDENTIFIER    

awcTrapLogGroup 1.3.6.1.4.1.522.3.100.2.100
OBJECT IDENTIFIER    

awcVxCompliance 1.3.6.1.4.1.522.3.100.1.1
OBJECT IDENTIFIER    

awcVxComplianceRev1 1.3.6.1.4.1.522.3.100.1.2
OBJECT IDENTIFIER